EQ'ing different sections of a Track

I am somewhat new, but proficient at Logic. What I want to do is take only a certain section of a single track, and just apply the EQ to only that small section (i.e. a different vocal EQ at a verse or bridge). Help me out, guys. Thanks
-Laurie

Automation.
You can either have a dedicated EQ inserted for the sections you want to treat, then simply automate an insert bypass for the sections you don't.
Or physically adjust the EQ values with automation so that they ramp into the sections you need a bit of extra treatment on.
I'd say the former is the easier method, but I wouldn't recommend it with third party plugs as you may get artefacts as the plugs are engaged. The latter is a preferrable method if you want to duck some sibilance or reduce a pop for example as it will give a smoother transition.

Similar Messages

Linking different buttons to different sections of a slideshow

Hi.
I have created a iDVD8 project with six buttons. When I select each of these buttons in turn in my finished DVD I would like them to link to different sections of the SAME slideshow. Can I do this?
The DVD is a slideshow of photos for 2007. Button 1-Jan/Feb, Button 2- Mar/Apr etc. I have tried making a PLAY ALL button and dragging the contents of Jan/Feb then Mar/Apr etc to it. It works but makes ny finished DVD exceed 4.2 GB. I wanted to avoid using a Dual layer disc.
Many thanks for any help out there,
James

My understanding is this is a DVD slide show you've created. It is not a movie of photos that you created in some other application and then added to iDVD.
In iDVD Preferences be sure to uncheck the box in the Slideshow panel to always add original photos because this takes up more space on the disc.
Save the project as a disc image. This disc image file should be small enough to fit a single-layer disc unless you added an audio track. If you did add audio then the audio is taking up more space on the disc than are the photos. If the disc image is too large for a single-layer DVD then you either need to use DL media, remove some of the audio or recreate your slide show as two projects to be burned on two DVDs. There is no way to compress a DVD slide show to fit a single-layer disc.

Best way to set up a movie with many different sections

Hi - i am making a flash demo and have a bunch of different sections / categories that the movie will need to navigate to. I created a similar demo previously and used different "scenes" to keep track and organize the different categories. Should i keep using scenes to navigate to or is there a better, more professional way to do my movie?
Also, where could i find more information on properly organizing and setting up my flash files? ie: naming conventions, etc.
thanks!
- Pat

There isn't really a definitive answer as to how one should set up a file, though a frequent recommendation is to avoid the use of scenes if you plan to incorporate navigation between different sections. While the concept of arranging separate sections as scenes is good, in reality, scenes can be problematic when it comes to implementing navigation into them.
Sometimes the set up choice is best decided based on how much content is involved and how that content is to be accessed (web versus pc presentation). If there is potential for some heavy file size, it may be better to create different sections as separate swf files and load them dynamically.
If you want to have the whole thing within one file, then you can use the one main timeline, dividing it into sections, using labels to navigate to them, or you could create it all in one frame and use visibility to control what anyone is seeing at any time. The latter of those two is handy if you have sections that need to retain information/settings in the event returning to them is necessary... if you just make them invisible, then they retain whatever state they were in.
And you can combine the various approaches if there is any utility in doing so. It really boils down to doing what you reason to be suitable for the job, and sometimes it even boils down to what approach you are most comfortable following... design efficiency is not necessarily always a driving factor is getting results.
As for conventions, you might try searching Google using the terms you think best identify what you are after. You might be able to find some beginner level tutorials that will go into some detail regarding coding conventions and whatnot.

Same Album Different Section Of Itunes

Hi,
In Itunes, i have put a few songs by the band i am in - when i have edited all the information to be exactly the same and click on the respective album to just show these songs they are in 3 different sections (as if it were 3 different albums) rather than all being in one list.
How can i get them into one album as such? Itunes says there is only one album there but it shows them separately.
Thanks

Try selecting all the songs at same time before doing 'get info'. When the editing window opens with multiple songs selected only fields that are the same on all selected tracks will be filled in when window opens. After opening window type in the album name in appropriate field.
What happens sometimes is that there are extra spaces in tags. The program sees them but we may not.

Setting different pages widths in different sections - Pages 5.2

In Pages 5.2, how does one set different page widths (margins) in different sections?

You can't. Margins apply to the entire document.
What you can do is set the margins to their max width and then use left and right indents for the sections you want narrower.
Peter

In my itunes library I have apps for the ipod. All of the apps were together, and now I have two different sections to my apps. The first one says 44 apps and the second section says 143 apps. When I connect my ipod only the first section goes on

can anyone help me with my apps on my itunes. They have separated for some reason. I have one section of 44 apps and the other has 121 apps. Only the top section will sinc with my ipod because at the side where it says apps, it is only showing the 44 apps and not the section at the bottom

Can you take a screen shot of the iTunes screen and post it? I do not really understand what you mean by different sections.
What model iPod and iOS do you have? Maybe the section that does not sync are not compatible with the iPod.
Were all the apps purchased with one account?
Do you have any Restrictions one that would prevent syncing? Settings>General>Restrictions.

How to filter the data in different sections (e.g. Report Footers)?

Hi,
I am using Crystal Reports 11 to generate cross-tables.
I plan to generate 3 cross-tabs, and each cross-table will be put in a section. For example, cross-tab1 in Report Footer a; cross-tab2 in Report Footer b; cross-tab3 in Report Footer c.
I know use "Select Expert" to filter data. But, it seems that "Select Expert" filters data for the whole report.
I want to filter the data for each cross-table separately. For example, filter cross-tab1 based on condition1; filter cross-tab2 based on condition2; filter cross-tab3 based on condition3.
How to filter the data in different sections (e.g. Report Footers)?
Thank you in advance.

Hi,
Now that you've inserted the subreport just right-click the sub-report and click Edit. The Design page for sub-report should open up.
You can now insert the cross-tab on the Report Header and insert a record selection formula of your choice.
Also, suppress all the other sections of the subreport so the Main report only shows the crosstab without any spaces.
Do the same for all the subreports.
-Abhilash

When I click "about this mac" to check on my storage, I get a number of different sections music, movies, etc. but also I get a section called backups, where can I find the files in this section?

When I click "about this mac" to check on my storage, I get a number of different sections music, movies, etc. but also I get a section called backups, where can I find the files in this section?

Welcome to Apple Support Communities
All the storage in "Backups" is taken up by local snapshots, which are made automatically in all MacBooks, MacBooks Pro and MacBooks Air with OS X Lion or newer and Time Machine turned on.
See > http://pondini.org/TM/30.html I recommend you to leave them there, because they will be removed automatically. However, if you want, you can disable or remove them manually if you want, even if there's no reason to do this. Have a look at the link above for more information

Am creating document with Pages. pages are in "portrait" orientation, but two charts at end need to be "landscape". changing the orientation for one section changes it for entire doc. can i have different orientations in Pages for different sections?

am creating a document with Pages. all pages using "portrait" orientation, except 2 appendices need to be in "landscape". in Word for Windows it is possible to have different page orientations for different sections of a document. is that possible with Pages. Even when i put the appendices in a different section, changing the page orientation changes it for the entire doc.

Make a separate document the size and orientation you want.
Turn that into a pdf and add it back into the original Pages document or into the pdf from from that document.
Peter

How do I apply different margins to different section in the same document?

In Pages 5, how do I apply different margins to different section in the same document? there are is no layout break like in Pages 4.

Use the Text Format Pane, Layout Tab, Indents.
You could do the same thing by dragging the margin stops on the Ruler.
Jerry

Different margins in different sections

Is it possible in Pages (iWork '09) to set different margins for different sections? If so, how?

D,
You must first set the Document Margins in the Document Inspector, Document Tab, Document Margins area. This setting is the narrowest margin that you intend to use anywhere in the document.
Then when you add a Layout Break, go to the Layout Inspector, Layout Tab, Layout Margins area and add more margin width with the settings there.
The Document Margins dictate the maximum text width (smallest margins) anywhere in the document. The Layout Margins further narrow the text area on a per-layout-region basis.
Jerry

GarageBand - How to set different BPM for each track?

Hi, for the last couple of years, I've been using Sony Acid on my PC to mix multiple tracks to make blends and remixes of songs. I've just switched of the a MacBook, and am trying to get Garage Band to do the same. I'm curious whether or not I can set the BPM of each track individually so they will all play at the same BPM when mixed. I'm only able to find the master BPM that changes the entire BPM. Any help would be great. Thanks in advance.

Well, as far as I can see you don't really want different BPMs on each track, but you want all tracks to have the same tempo - only you want to make the tracks fit that tempo.
You could do that in GB by first bringing each of the tracks to the desired tempo, then export it and re-import it. (There's some other ways to do it, but they all involve some fiddling around and maybe some math.*)
Logic offers a nice feature where you can shorten and lengthen a region just by dragging it out. That could be used for the purpose you're trying to achieve.
*For example: Determine the BPM of each of the tracks. Set the project's tempo to the BPM of track A. Import track A, turn it purple so it follows the tempo. Then set the project to project B's tempo, import it, etc. You will end up with all tracks in the same tempo, and you can still make the whole project go faster or slower.

How to apply different 'headers' to different sections of a document?

I realise that 'headers' may not be the correct term but... is it possible to apply a series of different 'headers' to different sections in a single document?
In the example where a single document consists of three 'chapters' (say, 10-15 pages each) I'd like to have a 'header' that reads: "This is the first part" at the top of all chapter one pages, "This is the second part" at the top of all chapter two pages and "This is the third part" at the top of all chapter three pages (etc).
I thought this might be possible using a series of master pages but have no idea whether that would work or how to go about it so any clues would be most appreciated - am using latest release of ID (CS6) on Windows 7.

Well you don't need different master pages.
You go to the single master page and go to
Type>Text Variables>Define
Click the pre-exisiting Running Header and click "edit"
Select "Running Header Paragraph Style"
Style: <select the style of the chapter heading> (if you don't have styles applied to your chapter headings then you need to apply a style to them so they show up)
Say Ok
On the Master Page - insert a text frame in the desired location.
With the Text Indicatior in the text frame - you can choose Type>Text Variable>Insert and choose the Running Head variable you just created.
That will do it.

Would crtl+f work or is there another way to search or quickly hyperlink to different sections on the page?

We have a very long extended data tab full of custom sections and we would like to be able to give a user a way to search the page quickly.
Would crtl+f work or is there another way to search or quickly hyperlink to different sections on the page?

I don't know enough about your use case to provide specific direction but you may be able to use the 6.1.1 UI extensibility point. For example, you could add an anchor link collection control that scrolls the page to the top of each section when selected.

Help finishing up my first flash site - using navigation to display different sections of the site?

Thanks for looking! i am making my first flash site, and im
not sure what to do next in regards to navigating through the site.
I have different sections, home, info, hardware, equipment, etc,
but im not sure how to make each section appear when you click the
corresponding navigation link. i have an idea but im not sure how
to execute it.
Should i make a movie clip for each section (home, info,
hardware, contact), then place each movie clip in its own frame on
the main time line, and on each navigation link button (each one is
a movie clip) use action script and put a gotoAndPlay() code with
the frame number of the corresponding section? so when you click
it, it goes to that frame which has the movie clip that has the
content for that part of site, say contact, or info?? if so how can
i do this?
that sounds really confusing and im sorry but please help out
a beginner! Thank you and happy halloween!
-Matt
here is a link so you can see the.swf
[url]http://www.filedorm.com/show.php/7839_INTOUCH.swf.html[/url]
and also here is a link for the .fla
[url]http://public.me.com/mattsh*t[/url]
your going to have to copy and paste that in your browser
since the world filter on here. just repleace the " * " with an " i
"

Targeting specific timelines in a flash movie can be daunting
in the beginning. But if you start from the main timeline (_root)
and build brom there, it becomes easier to understand.
For eg:
If you have 2 movieclips on your main timeline (_root).
Navigation and Pages.
Inside Navigation you have the buttons, and each button is a
separate movieclip.
Inside Pages you have each page, each a separate movieclip.
to target a specific page number, from a button, there are 2
ways you can go about it. The method that Ned suggested is called
RELATIVE.
-meaning that you target FROM WHERE YOU ARE.
the second method is ABSOLUTE.
-meaning you target FROM MAIN TIMELINE.
Relative is good, but can be confusing when using dot syntax.
Absolute is straight forward and easy to understand, and can
be used from anywhere in the whole movie. The downside, is that it
generally requires a bit more typing.
In the example I stated above, it does not require more
typing. simply say:
_root.page.gotoAndStop(number);
This line can be used from anywhere in your movie, at any
timeline depth, and will work with no worries.
You can also have ALL navigation code on the main timeline on
the first frame. Simply designate the path to the specific button
like so:
navigation.home_btn.onPress = function(){
doSomething;
this tells Flash that the button named "home_btn" located
inside the movieclip called "navigation" will have to doSomething
when Pressed.
I hope this helps you understand targeting a bit more.
Good Luck.

EQ'ing different sections of a Track

Similar Messages

Maybe you are looking for