Erecruit JOBID not stored in table Hrp5125 when choosing a vacant position

Hi
Does anyone know where the Position ID or Job Id is stored, if you have selected and saved the position code under the Organisation Data tab under the Position tab as the recruiter. I see that if you choose the Organisation UNit and Job tab, th ejob id is saved under JOBID in HRP5125. I need to know urgently so response will be extremely appreciated.
Thanks
Nas

Hi,
the tabs within the tab for requisition organizational data have a different behaviour.The second tab where you enter org.unit and job stores directly into HRP5125.
But if you assign one or more positions to the requisition they are linked through relations via HRP1001 to the requisition object. The org.unit and the job to these positions are linked again via HRP1001.
It is not really important to know where the data is stored. If you want to read it just use class CL_HRRCF_REQUI_BL method GET_POS_OF_REQ_WT. It should give you all information you need.
Best Regards
Roman Weise

Similar Messages

Why APO transaction data is not stored in tables

Hi All,
Why APO transaction data is not stored in tables.
can u explain me.
Babu

Good question Babu,
There indeed are tables for master data in APO database whereas the transaction data (qty, amount, dates and document numbers) are stored in a denormalized data base called livecache. But the master data too is identified with GUID's.. a cryptic and unique number given to e.g. a location, prodcuct, t/lane, customer and documents. This is because of speed of access if e.g. an external system is to fetch an information from APO using a unique session ID, instead of making a sequential read in APO tables, it read the live cache by called the GUID's that the calling characterics of the event. If one or more ECC system or an external execution system is connected to APO and one of the system collapses and rebuild again or if a system is assigned to a new business system group etc.. then its likely that systems can be out of sync and its where the live cache syncs up the data with APO tables again. If you still want to see tables in human readable format.. there are views available e..g the tables for locations LOCID and table for products MATLOC would take only GUID as inputs but the view V_MATLOC will show you the materials and locations by the numbers you know.
Hope I was able to explain. But yes the why part is still something of a mystery to me.. becasue with transparent tables it is easier to create local reports in APO and thats what probably SAP doesnt want. SAP can answer best as to what were the initial user and commercial considerations when developing APO
Regards,
Loknath

Problem - Values are not stored into Tables when value are accepted from us

// jsp code
<%@ page import="java.util.Enumeration" %>
<%@ page import="java.util.Vector" %>
<%@ page import="java.util.*" %>
<%@ page import="java.lang.*" %>
<%@ page import="java.sql.*" %>
<%@ page import="beans.register2" %>
<jsp:useBean id="registerbn" scope= "session" class="beans.register2" />
<% String base = (String) session.getAttribute("base");
registerbn.setDburl((String)session.getAttribute("dbUrl"));
registerbn.setDbuser((String)session.getAttribute("dbUserName"));
registerbn.setDbpasswd((String)session.getAttribute("dbPassword"));
System.out.println("Inside jsp - setMembers of promotion successful");
// registerbn.setMembers1();
System.out.println("after setting");
%>
<%
String action=request.getParameter("action");
%>
<HTML>
<HEAD>
<TITLE> TIFR INTRANET </TITLE>
</HEAD>
<HEAD>
<script language="JavaScript1.2">
//some validations functions
</script>
</head>
<body>
<table valign="top" align="top">
<TR>
<TD COLSPAN="100%"><jsp:include page="Header.jsp" flush="true"/></TD>
</TR>
<TR>
<TD align="top" valign="top"><jsp:include page="menu.jsp" flush="true"/>
<font face="arial" size="1">
site developed by ADPCell TIFR
</font>
</td>
<td>
<table cellpadding="2" cellspacing="3" width="40%">
<form method="post" action="./beans.register2">
<td width="40" align="center"
<font face="arial" size="5" align="right">
<b>
Registration <hr> </hr>
</b>
</font>
<br>
</td>
<tr valign="center" width="80%">
<td width="40%">
<b><font face="Arial" size="2">IdCode </b> </font>
</td>
<td width="40%">
<b><font face="Arial" size="2">
<input type="text" name="idcode" size="6" style="border-style:solid" value="">
</font></b>
</td>
</tr>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">User </font></B></td>
<td width="40%">
<input type="text" name="user" size="12" style="border-style: solid" value="">
</font></b></td>
</tr>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">Password </font></B></td>
<td width="40%">
<input type="password" name="password" size="25" tabindex="20" style="border-style: solid" width="12" value="">
</font></b></td>
</tr>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">Section code </font></b></td>
<td width="40%">
<select size="1" name="section_code" tabindex="9"
style="border-style: solid">
<%@ include file="section.txt" %>

1)
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">Category </font> </b></td>
<td width="80%">
<font face="arial" size="2"> <b>
<input type="radio" name="Category" value="General">General
<input type="radio" name="Category" Value="Operators">Operators
<input type="radio" name="Category" Value="Heads">Heads<BR>
</b> </font>
</td>
</tr>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">Budget Category </font> <b> </td>
<td width="40%">
<font face="Arial" size="2"> <b>
<input type="radio" name="BCategory" value="General">BGeneral
<input type="radio" name="BCategory" Value="Operators">Operators
<input type="radio" name="BCategory" Value="Head">Head
</td>
</tr>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">Budget Heads
</font></b></td>
<td width="40%">
<b><font face="Arial" size="4">
<textarea rows="2" name="Bheads" cols="20" size="100"
style="border-style: solid">
</textarea></font></b></td></tr>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">Other Category</font></b></td>
<td width="40%">
<b><font face="Arial" size="2">
<select size="1" name="OtherCategory" tabindex="20" style="border-style:
solid" size="2"><OPTION value="EH">EH
<OPTION value="EO">EO
<OPTION value="FH">FH
<OPTION value="FO">FO
<OPTION value="AO">AO
<OPTION value="AH">AH
</select></font></b></td>
</tr>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">email </font></b></td>
<td width="40%">
<b><font face="Arial" size="2">
<input type="text" name="email" size="20" style="border-style:
solid" width="6">
</font></b></td>
</tr>
<tr width="80%">
<td width="40%">
<font face="Arial" size="2"><b>Dob </font></b></td>
<td width="40%">
<font face="Arial" size="2"><b>
<select size="1" name="day" style="border-style: solid"><OPTION value="0">Day
<% int i;
for(i=1;i<=31;i++)
out.print("<OPTION VALUE=\""+i+"\">"+i+"</option>");
%>
</select>
<select size="1" name="month" style="border-style: solid" ><OPTION value="0">Month
<OPTION value="1" >January
<OPTION value="2" >February
<OPTION value="3" >March
<OPTION value="4" >April
<OPTION value="5" >May
<OPTION value="6" >June
<OPTION value="7" >July
<OPTION value="8" >August
<OPTION value="9" >September
<OPTION value="10">October
<OPTION value="11">November
<OPTION value="12">December
</select>
<select size="1" name="year" style="border-style: solid">
<% int j;
for(j=1950;j<=2000;j++)
out.print("<option value=\""+j+"\">"+j+"</option>");
%>
</select></b></font></td>
</tr>
<br> <br>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">Date of Join
</font></b></td>
<td width="40%">
<b><font face="Arial" size="2">
<select size="1" name="day1" style="border-style: solid"><OPTION value="0">Day
<% int k;
for(k=1;k<=31;k++)
out.print("<OPTION VALUE=\""+k+"\">"+k+"</option>");
%>
</select>
<select size="1" name="month1" style="border-style: solid" ><OPTION value="0">Month
<OPTION value="1" >January
<OPTION value="2" >February
<OPTION value="3" >March
<OPTION value="4" >April
<OPTION value="5" >May
<OPTION value="6" >June
<OPTION value="7" >July
<OPTION value="8" >August
<OPTION value="9" >September
<OPTION value="10" >October
<OPTION value="11" >November
<OPTION value="12" >December
</select>
<select size="1" name="year1" style="border-style: solid">
<% int l;
for(l=1950;l<=2000;l++)
out.print("<OPTION VALUE=\""+l+"\">"+l+"</option>");
%>
</select>
</b></font></td>
</tr>
</table>
<table cellpadding="2" cellspacing="3" width="40%" >
<tr width="100%">
<td width="30%">
<input type="Submit" value="Submit" name="B1" > </td>
<td width="40%">
<input type="reset" value="Reset" name="B2"></td>
<%
//String action=request.getParameter("Submit1");
if(action!=null && action.equals("Submit"))
try{
String idcode=request.getParameter("idcode");
String user=request.getParameter("user");
String password=request.getParameter("password");
String seccode=request.getParameter("section_code");
String Category=request.getParameter("Category");
String BCategory=request.getParameter("BCategory");
String Bheads=request.getParameter("Bheads");
String OtherCategory=request.getParameter("OtherCategory");
String email=request.getParameter("email");
String day=request.getParameter("day");
String month=request.getParameter("month");
String year=request.getParameter("year");
String Dob=day+"/"+month+"/"+year;
String day1=request.getParameter("day1");
String month1=request.getParameter("month1");
String year1=request.getParameter("year1");
String Doj=day1+"/"+month1+"/"+year1;
registerbn.setIdcode("idcode");
registerbn.setUser("user");
registerbn.setPasswd("password");
registerbn.setSec_code("seccode");
registerbn.setCategory("Category");
registerbn.setBut_cat("BCategory");
registerbn.setBut_heads("Bheads");
registerbn.setOther_Category("OtherCategory");
registerbn.setEmail("email");
registerbn.setDob("Dob");
registerbn.setDoj("Doj");
registerbn.saveData();
}catch(Exception ex)
out.println("ERROR :has occured ");
%>
</table>
</table>
</table>
</form>
</td>
</tr>
<jsp include page="Footer.jsp" flush="true"/>
------------------ End of JSP Programs ----------------
// Beans Code
package beans;
import java.util.*;
import java.util.Date;
import java.util.Vector;
import java.sql.*;
public class register
private String idcode;
private String user;
private String passwd;
private String sec_code;
private Vector sec_names;
private String category;
private String bud_cat;
private String bud_heads;
private String other_category;
private String email;
private String dob;
private String doj;
private String ent_dt;
private String act_dt;
private String dbUrl=null;
private String dbUser=null;
private String dbPassword=null;
public void setDburl(String u)
dbUrl=u;
public void setDbuser(String us)
dbUser=us;
public void setDbpasswd(String Pass)
dbPassword=Pass;
public String getIdcode()
return idcode;
public void setIdcode(String i)
idcode=i;
public String getUser()
return user;
public void setUser(String u)
user=u;
public String getPasswd()
return passwd;
public void setPasswd(String p)
passwd=p;
public Vector getSec_names()
return sec_names;
public void setSec_names()
// This function should select valid section code from the database and then populate the sec_names vector.
public String getSec_code()
return sec_code;
public void setSec_code(String s)
sec_code=s;
public String getCategory()
return category;
public void setCategory(String c)
category=c;
public String getBud_cat()
return bud_cat;
public void setBud_cat(String b)
bud_cat=b;
public String getBud_heads()
return bud_heads;
public void setBud_heads(String b)
bud_heads=b;
public String getOther_Category()
return other_category;
public void setOther_category(String o)
other_category=o;
public String getEmail()
return email;
public void setEmail(String s)
email=s;
public String getDob()
return dob;
public void setDob(String d)
dob=d;
public String getDoj()
return doj;
public void setDoj(String d)
doj=d;
public String getAct_dt()
return act_dt;
public void setAct_dt(String d)
act_dt=d;
public void setMembers()
Connection conn;
Statement stmt;
String query="Select sec_code from web.section";
sec_details=new Vector();
try
conn=DriverManager.getConnection(dbUrl, dbUser, dbPassword);
System.out.println("connected");
stmt=conn.createStatement();
System.out.println("Statement Created");
ResultSet rs=stmt.executeQuery(query);
do
String seccode=rs.getString(1);
sec_details.addElement(seccode);
}while(rs.next());
rs.close();
stmt.close();
conn.close();
}catch(SQLException e)
System.out.println("Execution Occured" +e);
catch(Exception e)
System.out.println("Execution Occured" +e);
public void saveData()
Connection conn;
Statement stmt;
String id=getIdcode();
String use=getUser();
String pass=getPasswd();
String mail=getEmail();
String sec=getSec_code();
String cat=getCategory();
String oth=getOther_Category();
String bud=getBud_cat();
String dob1=getDob();
String doj1=getDoj();
String budh=getBud_heads();
String query="insert into wb_register " + "(idcode, user, passwd, sec_code, category, bud_cat, bud_heads, other_category, email , dob, doj, ent_dt)" + " values('"+id+"','"+use+"','"+pass+"','"+sec+"','"+cat+"','"+bud+"','" budh"','" oth"','"+mail+"','"+dob1+"','"+doj1+"','"+"Sysdate"+"')";
try
conn=DriverManager.getConnection(dbUrl,dbUser,dbPassword);
System.out.println("connected");
stmt=conn.createStatement();
stmt.executeUpdate(query);
stmt.close();
conn.close();
catch(SQLException e)
System.out.println("Exception occured" +e);
catch(Exception er)
System.out.println("Exception occured" +er);
------------------------End of Beans Program ---------------
Questions:-
1) when we are submitting values to form it is not stored into backend (Oracle 9i)
2) please send some source code for how to fetch values from backend and wants stored into Combo box /select Box
3) We have faced problem of How call methods of Bean program into JSP programs

The code to get the values from the database and store them in the combo box or select box would be as follows:
<%
zSQL = "select id, name from Users"
rs = Con.ExecuteQuery(zSQL);
if(!rs.next()) {
%>
<select name="id">
<option value="0">select the name</option>
<%
do {
%>
<option value="<%= rs.getString(1) %>"><%= rs.getString(2) %></option>
<%
while (rs.next());
%>
</select>
<%
else {
out.println("No Record Found");
%>
This would help you better.
and for your first question, please check whether u are able to connect database with your connection method. if you are able to connect to the database, then please check the values (print them on the browser) which are posted from form, if it is also correct then check you r insert statement.
and for your last question the best tutorial is JAVA API.
Cheers!
Rambee

In FTP server file not storing in proper order when 'FTP_R3_TO_SERVER'

Dear ,
when i used FTP_R3_TO_SERVER to download data in FTP server
i checked in FTP server file is not storing in proper order in FTP server . plz help how to get the file in proper order .it urgent . full points must be given. i given code below .
DATA : BEGIN OF iresult OCCURS 5,
rec(450),
END OF iresult ,
DATA :
dest LIKE rfcdes-rfcdest VALUE 'SAPFTP',
compress TYPE c VALUE 'N',
host(64) TYPE c.
DATA: hdl TYPE i.
DATA: BEGIN OF result OCCURS 0,
line(100) TYPE c,
END OF result.
DATA : key TYPE i VALUE 26101957 ,
dstlen TYPE i,
blob_length TYPE i.
host = p_host .
DESCRIBE FIELD p_password LENGTH dstlen IN CHARACTER MODE.
CALL 'AB_RFC_X_SCRAMBLE_STRING'
ID 'SOURCE' FIELD p_password ID 'KEY' FIELD key
ID 'SCR' FIELD 'X' ID 'DESTINATION' FIELD p_password
ID 'DSTLEN' FIELD dstlen.
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
user = p_user
password = p_password
host = host
rfc_destination = dest
IMPORTING
handle = hdl
EXCEPTIONS
not_connected = 1
OTHERS = 2.
IF sy-subrc = 0.
CONCATENATE 'cd' ftppath INTO ftppath SEPARATED BY space .
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
handle = hdl
command = ftppath
TABLES
data = result
EXCEPTIONS
command_error = 1
tcpip_error = 2.
IF sy-subrc = 0 .
CLEAR result .
REFRESH result .
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
handle = hdl
command = 'ascii'
TABLES
data = result
EXCEPTIONS
command_error = 1
tcpip_error = 2.
IF sy-subrc = 0 .
DESCRIBE TABLE iresult LINES lines.
blob_length = lines * width .
clear : lines.
Delete the existing file
CONCATENATE 'del' ftpfile INTO delfile SEPARATED BY SPACE.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
handle = hdl
command = delfile
TABLES
data = result
EXCEPTIONS
command_error = 1
tcpip_error = 2.
*End of deleting the existing file
CALL FUNCTION 'FTP_R3_TO_SERVER'
EXPORTING
handle = hdl
fname = ftpfile
blob_length = blob_length
TABLES
blob = iresult
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF sy-subrc 0 .
WRITE 'Error in writing file to ftp' .
ELSE.
WRITE 'File downloaded on the ftp server successfully'.
ENDIF.
ENDIF.
ELSE.
WRITE : 'Path on ftp not found : ' , ftppath .
ENDIF.
CALL FUNCTION 'FTP_DISCONNECT'
EXPORTING
handle = hdl.
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
EXPORTING
destination = 'SAPFTP'
EXCEPTIONS
OTHERS = 1.
ELSE.
WRITE 'Could not connect to ftp' .
ENDIF.
ENDFORM. " FTPFINANCEACCESS_DOWNLOAD
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-name = 'PASSWORD'.
screen-invisible = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Edited by: manoj kv on Feb 27, 2008 12:55 PM
Edited by: manoj kv on Feb 28, 2008 5:37 AM
Edited by: manoj kv on Feb 28, 2008 5:39 AM
Edited by: manoj kv on Mar 5, 2008 2:15 PM
Edited by: manoj kv on Mar 7, 2008 12:51 PM

Hello,
Did you try to put 'X' to the parameter CHARACTER_MODE.
Hope it will help you
Olivier

Gr/ir slip field value is not stored in table mkpf..!!

dear sap gurus,
    i have a typical problem.. i am doing Transfer posting from one storage location to another. using MB1B with 311 mov type.. and mentioning some values in the gr/ir slip field.. but system is not storing the value in table..
Can any one say how to solve this.. if i use MIGO_TR then its storinghte value i mentioned in MKPF table..
Regard,
Manu

Hi Manu,
This GR/GI slip number has only been designed for use in those countries (for example, Italy) whose legislation requires specification of this number for goods that leave the plant and are transported on public roads. In other countries, the material document number printed on the GR/GI slip (in the standard system) is usually sufficient. To enter external documents, you can use the field Material slip or Delivery note.
If still wants to use this field you are required make relevent settings in config.
Please go to transaction OMC1.
There you will find 4 push buttons.
   1. Activation of GR/IR slip for plant.
   2. Number range grouping code.
   3. Intervals for number range.
   4. Object(here you are assigning the number range for the plant, storage location and movement type.
This will allow you to store GR/IR slip number in MKPF with trx. MB1B
Regards
Mauro

GL Balance not showing in F.01,,when choose group currency 30

Hi gurus,
When we run the report : F.01 (Balance Sheet / P&L Statement) with Currency type: 10 (Company Code Currency - INR) report is showing all GL balances.
But if we run the same report: selecting Currency Type 30 (Group Currency-USD) no GL Account balance is not updating in the report F.01.
Can you please let me know what will be the problem ?
Thanks,
Samar

Hi ,
It is not related to foreign currency gain/loss a/c.My users when he runs Trial Bal through F.01,he use "Currency type 30 and found no GL balance is coming.But when he uses Currency type 10 then all balances are coming.
Kindly advise.
Regards,
Samar

Urgent: Oracle Text error: DRG-10001: can not access result table

Hi,
I am getting the "DRG-10001:can not access result table" error when trying to run the oracle text procedure ctx_cls.train within HTMLDB. The schema i used for parsing is granted with the necessary privileges, and i can run the procedure manually using the same schema in sqlplus. Following is the script I am trying to run:
1. begin
2. ctx_cls.train(
3. index_name => 'MyDocindex',
4. docid => 'MyDoc_id',
5. cattab => 'MyDocTab_categories',
6. catdocid => 'cat_MyDoc_id',
7. catid => 'cat_id',
8. restab => 'rules',
9. rescatid => 'rule_cat_id',
10. resquery => 'rule_text',
11. resconfid => 'rule_confidence'
12. );
13. end;
Please help urgently!
Thanks
RG

I seem to have hit a similar problem.
Did you eventually resolve this problem?
Rgds
Z

Not Updating Customized Table when System having Performance Issue

Hi,
This is actually the same topic as "Not Updating Customized Table when System having Performance Issue" which is posted last December by Leonard Tan regarding the user exit EXIT_SAPLMBMB_001.
Recently we changed the program function module z_mm_save_hide_qty to update task. However this causes more data not updated. Hence we put back the old version (without the update task). But now it is not working as it used to be (e.g. version 1 - 10 records not updated, version 2 with update task - 20 records not updated, back to version 1 - 20 records not updated).
I tried debugging the program, however whenever I debugged, there is nothing wrong and the data is updated correctly.
Please advise if anyone has any idea why is this happening. Many thanks.
Regards,
Janet

Hi Janet,
you are right. This is a basic rule not to do any COMMIT or RFC calls in a user exit.
Have a look at SAP note 92550. Here they say that exit EXIT_SAPLMBMB_001 is called in the update routine MB_POST_DOCUMENT. And this routine is already called in UPDATE TASK from FUNCTION 'MB_UPDATE_TASKS' IN UPDATE TASK.
SAP also tells us not to do any updates on SAP system tables like MBEW, MARD, MSEG.
Before the exit is called, now they call 'MB_DOCUMENT_BADI' with methods MB_DOCUMENT_BEFORE_UPDATE and MB_DOCUMENT_UPDATE. Possibly you have more success implementing the BADI.
I don't know your situation and goal so this is all I can tell you now.
Good luck!
Regards,
Clemens

Java Stored Proc, passing BLOB, not stored in a table.

I have checked this article, and found it will not suit my needs.
http://otn.oracle.com/sample_code/tech/java/codesnippet/jdbc/lob/LobToSP.html
I have even looked at the 4 articles on the "JSP How-To Documents" page.
I need to pass in a BLOB to my Java Stored proc, but not store it in the DB - My java code manipulates the LOB and it should never go into the DB. I know I could do the normal store, get an id and pass to my JSP... but that is a poor way to implement this. Are there any code samples on how to do this please ?
D

WOW! That seems like a very bad design.
Is it just the compiler that has the problem or is the PL/SQL code inside the stored procedure also affected? For example, if I'm doing an
EXECUTE IMMEDIATE 'insert ... INTO OtherSchema.tblTest';
Is this going to be a problem?
The problem with granting the access explicitly is the Archive Schema, which has the stored procedure that is failing, might not exist at the time when the other schemas are created. Therefore, there is no user to grant permissions to. I solved this by granting permissions to the role and when the archive user is created it is assigned that role.
This seems like the proper way to solve this problem.

Aperture & iPhoto metadata when images NOT stored in iPhoto

Thinking of "upgrading" to Aperture from iPhoto '11 - still want to use iPhoto for organization but Aperture for hopefully better editing capabilities, etc.
Have 30,000+ images with keywords, etc. in iPhoto; the image files are NOT stored IN iPhoto, i.e., they are organized in folders external to iPhoto's library. The iPhoto library file best I can tell stores thumbnails and keyword metadata, etc.
I'd like to use Aperture and have access to all of iPhoto's keywords, etc. but to use the original photo files.
Can Aperture be setup to work this way? i.e., to pull in the 30,000+ photos' keywords yet reference the same originals that iPhoto is referencing?
I don't want to duplicate the 30,000+ originals... In all likelihood I'd only ever want to manipulate a small percentage of the total image library in Aperture.
Any suggestions appreciated!
Alex

Alexander Mcleod wrote:
Thank you for taking the time to reply...
re: "Basically to edit an image, stored in iPhoto, in Aperture you would have to export the image from iPhoto import into Aperture modify it export it out of Aperture and import it back into iPhoto."
My point is that in my case the images are NOT *stored* IN iPhoto...
Yes I understand, your iPhoto library is setup using referenced masters, the termed used when the master file is stored outside of the programs database. And you could setup Aperture in the same way and they would both be pointing to the same master file, external to both programs databases.
But here's here's the kicker: The master file *is never modified* by either program. I believe iPhoto makes a copy of the master when you apply adjustments (someone with a greater understanding of iPhoto can correct me here) how it does it isn't important what is important is that he master isn't modified; Aperture also leaves the master alone. It records the adjustments you make as a stream on instructions and applies those to the master when you want to create an adjusted image. What you see (normally) in Aperture's views are previews of the adjusted image. So changes you make in Aperture won't be seen in iPhoto because iPhoto is looking at the original master file, not Aperture's adjusted version.
Now you can share the preview from Aperture with iPhoto, but at this point you basically have the adjusted image in two places.
And in reference to the other response that suggests that iPhoto and Aperture use different databases, I'd completely expect that to be the case. What I'm wondering about is can Aperture initialize its database from iPhoto's database; i.e., create its equivalent to iPhoto's "library" file (where all the iPhoto metadata is stored) from iPhoto's AND like iPhoto reference the original files in their original location.
Yes Aperture can initialize a database of its own based on the iPhoto library and that library can be setup to use referenced masters, see above.
I don't see why I'd need to 'export' any image from iPhoto (unless of course I'd "edited" it in iPhoto - in which case the *modified* file IS I think stored IN iPhoto's library) but that's my point... I don't WANT to edit the files with iPhoto... I want to edit the files with Aperture.
You're right you won't need to export from iPhoto if you setup both with referenced masters. But like I said above to get back to iPhoto you will have to export from Aperture unless you can live with using the previews in iPhoto. But again you will basically have two identical library structures, at least at start, as time goes on they will diverge.
I hope this better clarifies what I'm trying to explain.
It does, I hope my reply also helps explain the difficulties with this setup and why it's not as cut and dry as it first appears.
I have read *many* other posts that point out what you're pointing out but they all seem to make assumptions about wanting to modify files in Aperture which were previously *modified* in iPhoto. The unmodified "original" photos (assuming both iPhoto and Aperture have the ability that iPhoto has to reference the original files from a location *external* to iPhoto) are then by definition are already shared between iPhoto and Aperture so there's no need to 'export' from one to the other, no?
As I've said whats shared is the original unmodified master image. Once either program modifies it it is no longer shared.

First row from Service Order Object list not stored in OBJK table

Hi all,
Please be patience with my terminology .
Could you please explain me if we have SO created based on notification, and that notification already have Equipment number, why this equipment is not created in OBJK table? So always the first row (as in attachment) is not stored in OBJK, other rows(objects) are there.
I know the EQUNR is stored in AFIH, but it's useless for us because I'm creating HANA analytical view with following join logic (simplified):
AFIH.OBKNR=OBJK.OBKNR
OBJK.ILOAN=ILOA.ILOAN
ILOA.TPLNR=IFLOT.TPLNR
ILOA.ILOAN=EQUZ.ILOAN (where EQUZ.DATBI='99991231')
EQUZ.EQUNR=EQUI.EQUNR
The join logic might not be 100% correct.
Thank you for your help.

Using the tags to format your code may help you get a response sooner than later.
This and other useful pieces of information are located in the FAQ
http://wiki.oracle.com/page/Oracle+Discussion+Forums+FAQ

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.
We get this error when we try to check the properties of an analysis server using SQL Server Management studio(right click the instance name
and check properties). We have resolved this issue twice by Stopping the SQL Server analysis service,removing db folders from Analysis Server Data folder and starting the services back on. The db folder that we removed was advised by the BI team.
The SQL Server Analysis Server is 2012 SP1

Hi RB_ORIPW,
The table with name of 'XXX' doesn't exist.
An error occurred when loading the model(Micorsoft.AnalysisServices)
If I understanding correctly, you encounter the error randomly, now what you want it that avoid this issue completely, other than stop the services, detele the db filder and restart the services, right?
The error might be caused by that the data file is corrupted. However, we cannot give you the exact reason that cause this issue. You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Besides, here is fix that describe the similar issue, and it was fixed in Cumulative Update 7 for SQL Server 2012 SP1, please refer to the link below to see the details.
http://support.microsoft.com/kb/2897263/en-us
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Err: CLI0150E Driver not capable. SQLSTATE=S1C00 when dragging a table...

<p>Hello everyone,</p><p> first i wanna tell you that I love your CR4E product! You did an awesome job!</p><p> Now, I am having a problem with creating a report using DB2 data. I have a ODBC connection, and I successfully connect to DB2. I can see all the tables; however, when I try to see sample data from a table i get java.sql.SQLException: General error message.</p><p>Also, if I try to drag a table to a report it gives me CLI0150E Driver not capable. SQLSTATE=S1C00 error.</p><p> </p><p>I have downloaded new DB2 drivers, and when i create a new Data connection I pick db2jcc.jar file.</p><p>I really dont know what the problem is.</p><p>Please help.</p><p>thanks,</p><p> </p><p>nn </p>

<p>Hi, you mention that you have an ODBC connection, but you also talk about connecting to the db2jcc.jar, can you provide me with some more details regarding what your database connection string looks like in the Database Explorer view? Are you connecting to the ODBC DSN using the JDBC driver or connecting directly to the DB2 server? We have tested the DB2 connections with CR4E so it should work without too many issues. Unfortunately, I do not have a DB2 server installed on my machine and I am on the road this week so I cannot test this at this time. However, I will give this a try when I get in next week against our test database servers and let you know the connection details that we used for our testing. In the meantime any more detail you can give me on exactly how you are setting up your connection will be useful. <br /></p><p>Regards,<br />Sean Johnson (CR4E Product Manager) <br /><br /> <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a> </p>

Firefox keeps dropping my bookmarks or perhaps not storing them when I ask it to. Is there a fix?

Firefox keeps dropping some of my bookmarks and not storing others when I ask it to. Also, in searching for answers, I found out that I have 2 profiles. I couldn't open any of the 3 items in the first but in the second one I found a number of dated bookmarkbackups files. Am I supposed to have 2 profiles? How do I fix all this.
I have also noticed other anomalies and wonder if they are part of the new 32.0 download I just got. Today, twice, exactly 27 instances of Firefox opened when I clicked on it just once.

These can't get your data back, but will help in the future.
These add-ons can be a great help by backing up and restoring Firefox
'''[https://addons.mozilla.org/en-US/firefox/addon/febe/ FEBE (Firefox Environment Backup Extension)]''' {web link}
FEBE allows you to quickly and easily backup your
Firefox extensions, history, passwords, and more.
In fact, it goes beyond just backing up -- It will actually rebuild
your saved files individually into installable .xpi files.
It will also make backup of files that you choose.
'''[https://addons.mozilla.org/en-US/firefox/addon/opie/ OPIE]''' {web link}
Import/Export extension preferences

The query does not reference any table when attempting to build the WHERE clause. (IES 00022)

Hi
I am getting below error.
The query does not reference any table when attempting to build the WHERE clause. (IES 00022)
This error is in Validating Measue object in IDT.
It is not throwing error for dimensions objects but only for measure objects.
My BO version is 4.1
Backend is Teradata 14.1.
Regards
Gaurav.

Hi
In the dimension/Measure definition, you can select the table. Find the below screenshot.
If you still getting the issue…Can you please share your screenshot, for better understanding the issue?

Erecruit JOBID not stored in table Hrp5125 when choosing a vacant position

Similar Messages

Maybe you are looking for