Error -196736204 occurs when deploying shared variables?????

When I try to deploy shared variables contained in a library named 'DAQ_sv.lvlib' I get the following message for each shared variable in the library.
Deploying DAQ_sv.lvlib:exit \\192.168.1.100\DAQ_sv\exit deployment failed (error: -1967362041, IAK_SHARED: (Hex 0x8ABC7007) Out of range.).
this paticular message was generated by the shared variable 'exit'.
Does anyone know what caused this?

Hello Steve,
You probably have a shared variable in this library that has the "Bind to Source" option checked in its properties but the path for that binding is either incorrect or empty. Make sure all the variables in this library have valid bindings. Also try deploying a new library to new variables make sure that there is nothing else wrong.
Regards,
Chetan K
Application Engineering
National Instruments

Similar Messages

Deploying shared variable

Is it possible to disable or hide the deploying shared variables dialog box at program start?

Hello Peter
No, it is not possible to completely disable or hide this dialog box when deploying a VI to a real time target or building an executable since this dialog box is used to report errors during the download process. The only thing you are able to do is check the Close on successful completion checkbox to close this dialog box after a successful download.
Carlos Pazos
Applications Engineer
National Instruments Mexico

SQL error 3113 occurred when executing EXEC SQL.

Hi,
We are facing one typical problem, One background is failing regularly with
below dump. as we now got all notes giving information, if database restarted
taking backup, these type of failures occur, but our database is only down for backup once in a week, but it is failing with frequenly.
in this two servers are located in different place, in this job tries to connect
another server to get material statistics.
It is giving some error message in sm21 with
SQL error 3113 occurred when executing EXEC SQL.
work procees in reconnect mode.
all notes saying these types of dump occur when database restared, but this dump
even though database is up.
below is short dump, please can anyone help me from this problem.
ABAP runtime errors    DBIF_DSQL2_SQL_ERROR
      Occurred on    08.01.2007 at 00:30:28
>> Short dump has not been completely stored. It is too big.
SQL error 3113 occurred when executing EXEC SQL.
What happened?
The error occurred in the current database connection "AZ1".
What can you do?
Note the actions and input that caused the error.
Inform your SAP system administrator.
You can print out this message by choosing "Print". Transaction ST22
allows you to display and manage termination messages, including keeping
them beyond their normal deletion date.
Error analysis
How to correct the error
Database error text........: "ORA-03113: end-of-file on communication channel#"
Triggering SQL statement...: "select mara.groes, mara.brgew, mara.ntgew,
mara.gewei, mara.volum, mara.voleh, mara.mstae, mara.mstde, mara.prdha,
marc.matnr, marc.werks, marc.mmsta, marc.mmstd from sapr3.mara, sapr3.m
where sapr3.mara.mandt = sapr3.marc.mandt and sapr3.mara.matnr =
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"DBIF_DSQL2_SQL_ERROR"
"ZM2431216 " or "ZM2431216 "
"EXTRACT_GENERAL_DATA"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in th
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error o
or which actions and input led to the error.
System environment
SAP Release.............. "46C"
Application server....... "essceu3"
Network address.......... "172.19.119.198"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00C7ADBD4C00"
Database server.......... "ukblx176"
Database type............ "ORACLE"
Database name............ "EU3"
Database owner........... "SAPR3"
Character set............ "es_ES.ISO8859-1"
SAP kernel............... "46D"
Created on............... "Jul 9 2006 20:26:33"
Created in............... "AIX 1 5 00447C4A4C00"
Database version......... "OCI_920__OCI_7_API "
Patch level.............. "2257"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.0.5.., ORACLE 8.0.6.., ORACLE
8.1.6.., ORACLE 8.1.7.., ORACLE 9.2.0.., ORACLE 10.2.0.."
SAP database version..... "46D"
Operating system......... "AIX 1 4, AIX 2 4, AIX 3 4, AIX 1 5, AIX 2 5, AIX 3
5, , System build information:,                                      , LCHN :
841480"
User, transaction...
Client.............. 600
User................ "MPZMMES"
Language key........ "S"
Transaction......... " "
Program............. "ZM2431216 "
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where termination occurred
The termination occurred in the ABAP/4 program "ZM2431216 " in
"EXTRACT_GENERAL_DATA".
The main program was "ZM2431216 ".
The termination occurred in line 980
of the source code of program "ZM2431216 " (when callin
The program "ZM2431216 " was started as a background jo
Source code extract
009500              mara.ntgew,
009510              mara.gewei,
009520              mara.volum,
009530              mara.voleh,
009540              mara.mstae,
009550              mara.mstde,
009560              mara.prdha,
009570              marc.matnr,
009580              marc.werks,
009590              marc.mmsta,
009600              marc.mmstd
009610        into :w_ops-groes,
009620              :w_ops-brgew,
009630              :w_ops-ntgew,
009640              :w_ops-gewei,
009650              :w_ops-volum,
009660              :w_ops-voleh,
009670              :w_ops-mstae,
009680              :w_ops-mstde,
009690              :w_ops-prdha,
009700              :w_ops-matnr,
009710              :w_ops-werks,
009720              :w_ops-mmsta,
009730              :w_ops-mmstd
009740        from sapr3.mara, sapr3.marc
009750        where sapr3.mara.mandt = sapr3.marc.mandt
009760          and sapr3.mara.matnr = sapr3.marc.matnr
009770          and sapr3.mara.mandt = :p_mandt
009780          and sapr3.mara.matnr = :w_ebs-matnr
009790          and sapr3.marc.werks = :p_owerks
    >    ENDEXEC.
009810 endform.                    " extract_general_data
009820 *&
009830 *&      Form append_i_ops
009840 *&
009850 *      Appends W_OPS to I_OPS
009860 *
009870 form append_i_ops.
009880    append w_ops to i_ops.
009890 endform.                    " append_i_ops
009900 *&
009910 *&      Form extract_material_description
009920 *&
009930 *      Extracts a Material Description from the remote database an
009940 *      modifies the current record in I_OPS.
009950 *
009960 *        >P_SPRAS Language Key
009970 *
009980 form extract_material_description using    p_spras.
009990    EXEC sql performing set_langauge.
Contents of system fields
SY field contents..................... SY field contents............
SY-SUBRC 0                            SY-INDEX 0
SY-TABIX 1                            SY-DBCNT 1
SY-FDPOS 18                            SY-LSIND 0
SY-PAGNO 0                            SY-LINNO 1
SY-COLNO 1
Chosen variables
Name.......................... Contents.1........2........3....+..
W_EBS-PRAT4
                              2
                              0
W_OPS-GROES
                              22222222222222222222222222222222
                              00000000000000000000000000000000
W_OPS-BRGEW                    #######
                              0000000
                              000000C
W_OPS-NTGEW                    #######
                              0000000
                              000000C
regards,
krishnaiah.

Hi,
This is usually a SERVER SIDE DATABASE PROBLEM or SQLNET LISTENER (server side) PROBLEM. The client side should initially be ignored and instead the server should be investigated. In rare cases, this can be caused by client
side memory or other resource problem, or a DLL version mismatch, but this is
unlikely.
Enlist the assistance of your DBA. Then reproduce the ORA-3113 error on your
client application. Ask your DBA to look at the database side Alert.log and
trace files and look for ANY activity. Any activity that coincides with your
ORA-3113 will be a clue.
REgards
Vinod

SharePoint 2013 - In document library, an unexpected error has occurred when a user clicks on ellipsis then "EDIT"

Just as the title infers, I have a user who is experiencing an unexpected error when he clicks on "EDIT" after clicking on the ellipsis. Document in the Document library is an MS Word file.

Hi,
According to your post, my understanding is that an unexpected error has occurred when a user clicks on ellipsis then "EDIT".
Please make sure he has the edit permission.
Please make sure the Office 2013 is installed correctly on his computer.
In addition, I recommend to use another brower to check whether it works.
If so and the error message persists, please check the SharePoint ULS log to find more information about this error, the ULS
log file is in the location: C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
You can check the ULS log by the methods here:
http://blog.credera.com/technology-insights/microsoft-solutions/troubleshooting-sharepoint-errors/
More information:
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Deploy Shared Variable Engine in localhost

I need to talk to multiple RTs using single computer. It seems
obvious to deploy shared variable engine (libraries) in localhost instead of
RT. However, the problem is the shared variables (read) used in localhost VIs
are not being updated from RTs. But when I am using another local VI to update
the shared variable, it is working just fine. The variable path of the RT looks
like "\\My Computer\Local NPSVlvlib\Test
Data". I think this is the problem why the values are not being updated
because RT cannot resolve the network path ("\\My
Computer\Local NPSVlvlib\Test Data"). Also, I tried to change the shared
variable path in RT but I could not do it. Help Needed!!!!
Solved!
Go to Solution.

Thanks for your reply. I found in this link http://zone.ni.com/devzone/cda/tut/p/id/9900#toc2 that host computer can host the shared variable library and RT does not need the shared variable engine. See below
If your application includes a single host computer and a single or multiple RT targets it is recommended to host the library on the host computer. This will save memory and processor time on the RT targets. Also, by hosting the library on the host computer instead of the RT target, you can reduce the software install footprint on the RT target. The RT target will not need the Network Variable Engine, but will still require Variable Client Support. The Network Variable Engine allows hosting, the Client allows communicating with libraries on other machines. You can see a RIO target with these installed in Figure 4.
That exactly what I am trying to do. Any comments?

Coercion problem when using Shared Variable

I have a curious coercion problem when using Shared Variables. I want to share the state of a State Machine, which is an enum saved as a control (typedef) called TYPE State (see attached). I create a shared variable called State and define it as a Custom Control, using the just-mentioned typedef. So far, so good. I've attached three simple VIs -- the first one, Init State, simply wires a constant to the input of the Shared Variable to initialize it -- the wired constant is, of course, defined by the typedef. However, the Get State and Set State, meant to wire an indicator (for reading the state) or control (for setting it), develop coercion dots when wired into the Shared Variable. Why? How do I get rid of the dot? [I suppose I could abandon my typedef and custom control, but the beauty of typedefs and custom controls is that it "enforces" rules, lets you use enums for clarity, keeps the code "honest", etc. -- I'd hate to give that up just to get rid of a dot!].
On a related note, the code seems to work. This is much too simplistic to do anything, but if you open Set State and Get State, set the state to anything, run it (it immediately stops, of course), then run Get State, you'll see the chosen state appear in the indicator. So it does appear to work. The "error" (coercion dot) may, I suppose, be a "bug" in Labview because it can't figure out the mapping of the (very simple!) Custom Control, but if so, I hope it gets fixed quickly!
Bob Schor
Attachments:
Coercion Problem1.zip ‏38 KB

Hello Bob,
I am also seeing this behavior, I will escalate this question to our LabVIEW developers and post again here no later than next Tuesday, November 27th as National Instruments will be closed for the remainder of this week.
If this issue does turn into a product suggestion, I would suspect the workaround would to live with the coersion dot for the time being.
Enjoy the holiday
Regards,
Erik J.
Applications Engineer
National Instruments

An error has occurred when creating this editor

I had created a View in a WDC project which I had also deployed and run successfully in GP several times. Once I closed and opened NetWeaver Developer Studio, and tried to open this View again I get an error saying 'An error has occurred when creating this editor'. Please let me know what could be the reason.
Anil

I also faced with this problem several times but without fatal consequences. To be sure you can check the log in your workspace and paste it to the thread.
Also, try to close all the views and reopen the studio, usually it solves the problem.
Aliaksei

I keep getting the message "An unknown error has occurred" when trying to sign in to the App Store. Why?

I keep getting the message "An unknown error has occurred" when trying to sign in to the App Store. How do I solve this problem?

Make sure you have the correct country selected. Click the round flag icon bottom right side of the App Store window.

HT201303 An unknown error has occurred when trying to sign in , and I know I putting in the correct info, this stinks can anyone help? Because apple isn't...

An unknown error has occurred when trying to sign in , and I know I putting in the correct info, this stinks can anyone help? Because apple isn't...

urgh... just noticed my previous post said i have mountain lion... i meant that i have snow leopard. no idea why i messed that up!
anyway, i just tried reinstalling snow leopard from the usb key that came with the computer. Then, I installed software updates until it told me there were no more updates. After that, I tried the app store again, and it still is giving me the unknown error. really irked by that. may have to take it back to the apple store yet again, to see if i can figure out why the app store won't work.

Why am i getting an error message that says "an unknown error has occured" when i try to update my apps in the app store

Can someone please offer some suggestions why I am getting an error message that says "an unknown error has occured" when I try to download or update my apps in the app store?
Thanks!
disregard! i noticed someone else's post about signing out of the app store and signing in again and it worked.....

Hi ...
Try here > Mac App Store: "An unknown error occurred (100)" when purchasing
If that doesn't help, drag the App Store icon straight up off your Dock so it goes, "poof".
Now drag the App Store icon from your Applications folder to the Dock. Try updating your apps.

Why am I getting an unknown error has occurred when trying to download apps

For the past 12 hours I have been getting a message, 'an error has occurred' when trying to update any existing apps or downloading any new apps. Anybody experiencing the same thing or know what I can do?

Were you able to find a solution to this issue? I am also getting the 'an error has occurred' message when trying to download or update any apps on my iPhone. Restarted, updated, re-booted, etc etc, nothing has worked.

'Error 8 occurred when starting the data extraction program'

Hello Experts,
I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
But when I check the extractor through RSA3, it looks fine.
Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
Thanks
Regards,
KP

Hi,
Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
rgds,
Edited by: Krishna Rao on May 6, 2009 3:22 PM

Runtime error SQL error 3114 occurred when accessing program CX_ w

Hi Friends,
Iam in a big mess . I have one query based on one my Zinfocube.This query ia attached in the workbook .. Previuolsy all was fine , but now whever iam executing this query it is throwing me the exception
Query 0: Runtime error SQL error 3114 occurred when accessing program CX_ with parallel processing via RFC.
and
Beim Lesen der Daten sind Fehler aufgetreten. Navigation ist mÃ¶glich
I am not able to get the cause of error ..
Can anybody help me in this regrd as its a bit urgent.
Thanks in advance..

Hi , thanks for replying ,
I have tried running query through RSRT also , its not working still it is giving me the same error .
In st22 it is showing me the follwing dump.
DBIF_REPO_SQL_ERROR
Short text
    SQL error 3114 occurred when accessing program
What happened?
    The system is no longer linked to an ORACLE instance.
    No further operations can be performed on the database.
What can you do?
    You cannot eliminate this error yourself.
    Please inform your database administrator.
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    The system attempted to access an ORACLE instance to which
    it is no longer linked.
    This situation may arise because the ORACLE instance
    has been stopped due to an error or an external operation.
How to correct the error
    Database error text........: "ORA-03114: not connected to ORACLE"
    Triggering SQL statement...: "CX_SQL_EXCEPTION==============CP "
    The current status of the ORACLE instance cannot be determined.
    It may be still inactive or the database administrator may have
    restarted it.
    In any case, all systems that have accessed the ORACLE instance
    must be restarted after the ORACLE instance has been restarted.
    If you were working on a central system, inform
    your system administrator.
    If you were working on an external local system, inform
    the person responsible for this system.
    If you were working on your own local system, restart
    the system yourself.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_REPO_SQL_ERROR" " "
    "CL_SQL_RESULT_SET=============CP" or "CL_SQL_RESULT_SET=============CM006"
    "NEXT_PACKAGE"
    If you cannot solve the problem yourself and want to send an errornotification to SAP, include the following information:
1. The description of the current problem (short dump)
   To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
   Display the system log by calling transaction SM21.
   Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_REPO_SQL_ERROR" " "
"CL_SQL_RESULT_SET=============CP" or "CL_SQL_RESULT_SET=============CM006"
"NEXT_PACKAGE"
Thanks in Advance..

I get "an error has occured" when trying to download from the AppStore. I can not re-download as the button is not active.

I encountered the response "an error has occured" when I downloaded Maverick X from the App Store. I can not try to re-download as the download button is not active. I have tried rebooting and to get the download from apple.com but it keeps redirecting to the App Store.
Suggestions?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Getting "an unknown error has occurred" when signing into apps store

I'm getting "an unknown error has occurred' when I tried to sign into Apps Store from one of my Mac Air. This is the only device that is having sign in problem. I can sign into Apps Store from another Mac Air, iPad and PC. What gives?

Make sure Date and Time settings are correct.

Error -196736204 occurs when deploying shared variables?????

Similar Messages

Maybe you are looking for