Error 200524 and 200609 while writing analog ouput signal
i'm trying to generate continuous data. i'm gettting the following errors : -200524 and -200609, not able resolve them
please try to give me a solution. i have attached my code screeshot.
Attachments:
error.png 191 KB
abhishek.d wrote:
but getting the err -200524
Lets see what that error code means...
Error -200524 occurred at an unidentified location
Possible reason(s):
Write cannot be performed, because the number of channels in the data does not match the number of channels in the task.
When writing, supply data for all channels in the task. Alternatively, modify the task to contain the same number of channels as the data written.
Make sure you have the same number of columns in your data as you do channels. That is what this error means.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Similar Messages
-
APP-DT-34605:Oracle error ORA-4098 occured while writing to PER_ALL_ASSIGNM
We have Upgraded DB from 10.2.0.2 to 10.2.0.5 having same Apps version 11.5.10.2,
we have seen below issue upon upgrade,
While updating any information in Assignment i.e. Assignment Status getting following error.
APP-DT-34605:Oracle error ORA-4098 occured while writing to PER_ALL_ASSIGNMENTS_F
How to overcome these errors, please advise,
RMPlease see these docs.
PERWSHRG: Updating Assignment Gives Error APP-DT-34605 ORA-6510 [ID 286294.1]
Update Employee Assignment Details Cause Error: APP-DT-34605-- ORA-20001 occurred writing to PER_ALL_ASSIGNMENTS_F [ID 793451.1]
APP-DT-34605 Error When Saving on Assignment Form [ID 829292.1]
Receive APP-DT-34605 Error When Updating an Existing Payment Method [ID 780090.1]
ORA-06508 PL/SQL Could Not Find Program Unit Being Called: "APPS.PAY_PAY_SHD" [ID 1170903.1]
Thanks,
Hussein -
Getting Error In the Routine - While writing Code for the Cross Reference.
Hi,
Getting Error In the Start Routine - While writing Code for the Cross Reference from the Text table ( /BIC/TZMDES with Fields /BIC/ZMDES(Key),TXTSH ) Getting Error as [ E:Field "ZMDES" unknown ].
Transformation : IOBJ ZPRJ3(Source) -> IOBJ ZPRJC ( Target ).
The Source Fields are: 0logsys(Key),zprj3(Key),ZDOM3.
The Target Fields are : 0logsys(Key),zprjc(Key),ZDOM3, UID.
Here i am trying to Update the target Field UID by Comparing the Source Field [ zprj3(Key)] with the Text table ( /BIC/TZMDES ) and update the UID.
The Code is as below:
Global Declarations in the Start Routine:
Types: begin of itabtype,
ZMDES type /BIC/TZMDES-/BIC/ZMDES,
TXT type /BIC/TZMDES-TXTSH,
end of itabtype.
data : itab type standard table of itabtype
with key ZMDES,
wa_itab like line of itab.
Routine Code :
select * from /BIC/TZMDES into corresponding fields of table itab for
all entries in SOURCE_PACKAGE
where ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3.
READ TABLE itab INTO wa_itab
WITH KEY ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3
BINARY SEARCH.
IF SY-SUBRC = 0.
RESULT = wa_itab.
CLEAR wa_itab.
The tys_SC_1 structure is :
BEGIN OF tys_SC_1,
InfoObject: 0LOGSYS.
LOGSYS TYPE RSDLOGSYS,
InfoObject: ZPRJ3.
/BIC/ZPRJ3 TYPE /BIC/OIZPRJ3,
InfoObject: ZDOM3.
/BIC/ZDOM3 TYPE /BIC/OIZDOM3,
Field: RECORD.
RECORD TYPE RSARECORD,
END OF tys_SC_1.
TYPES:
tyt_SC_1 TYPE STANDARD TABLE OF tys_SC_1
WITH NON-UNIQUE DEFAULT KEY.
Please suggest with your valuable inputs.
Thanks in AdvanceI have split the code in two.. one for start routine.. other for field routine.. hope this helps
Types: begin of itabtype,
ZMDES type /BIC/TZMDES-/BIC/ZMDES,
TXT type /BIC/TZMDES-TXTSH,
end of itabtype.
data : itab type standard table of itabtype
with key ZMDES,
wa_itab like line of itab.
Start routine
select * from /BIC/TZMDES into corresponding fields of table itab for
all entries in SOURCE_PACKAGE
where ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3.
Sort itab.
field routine
CLEAR wa_itab.
READ TABLE itab INTO wa_itab
WITH KEY ZMDES = SOURCE_FIELD-/BIC/ZPRJ3
BINARY SEARCH.
IF SY-SUBRC = 0.
RESULT = wa_itab-<field name> -
Error in Tranform Activity While Writing From File to DB Table
Hi All,
I m trying to read the contents of a csv file and writing it to the db table.
When I am trying to map the file content to the db table using tranform activity, I am getting error as "failed to save XSL Map. Make sure XSL Map is valid".
Any ideas on how to over come this issue.
thnx in advance
Edited by: md.irfan.khan on Sep 7, 2009 4:00 AMfollowed the steps mentioned below. but still I'm getting the same error:
my transform.xsl file is as follows:
<?xml version = '1.0' encoding = 'UTF-8'?>
<ns0:SampledataCollection xmlns:ns0="http://xmlns.oracle.com/pcbpel/adapter/db/top/dbWriteService">
<ns0:Sampledata>
<ns0:firstnm>1</ns0:firstnm>
<ns0:gender>2</ns0:gender>
<ns0:age>3</ns0:age>
<ns0:lastnm>4</ns0:lastnm>
</ns0:Sampledata>
<ns0:Sampledata>
<ns0:firstnm>5</ns0:firstnm>
<ns0:gender>6</ns0:gender>
<ns0:age>7</ns0:age>
<ns0:lastnm>8</ns0:lastnm>
</ns0:Sampledata>
<ns0:Sampledata>
<ns0:firstnm>9</ns0:firstnm>
<ns0:gender>10</ns0:gender>
<ns0:age>11</ns0:age>
<ns0:lastnm>12</ns0:lastnm>
</ns0:Sampledata>
</ns0:SampledataCollection>
Logs from Audit Trails Activity:
<?xml version="1.0" encoding="UTF-8" ?>
- <audit-trail>
- <event sid="0" cat="2" type="2" n="0" date="2009-09-08T10:14:48.080+03:00">
- <message>
- <![CDATA[ New instance of BPEL process "file2DbProcess" initiated (# "40001").
]]>
</message>
</event>
- <event sid="BpPrc0.1" cat="1" type="2" label="process" n="1" date="2009-09-08T10:14:48.095+03:00" psid="0">
- <message>
- <![CDATA[ _cr_
]]>
</message>
</event>
- <event sid="BpTry0.2" cat="1" type="2" n="2" date="2009-09-08T10:14:48.127+03:00" psid="BpPrc0.1">
- <message>
- <![CDATA[ _cr_
]]>
</message>
</event>
- <event sid="BpSeq0.3" cat="1" type="2" label="sequence" n="3" date="2009-09-08T10:14:48.127+03:00" psid="BpTry0.2">
- <message>
- <![CDATA[ _cr_
]]>
</message>
</event>
- <event sid="BpSeq0.3" cat="2" type="2" wikey="40001-BpRcv0-BpSeq0.3-1" n="4" date="2009-09-08T10:14:48.158+03:00">
- <message>
- <![CDATA[ Received "inputVariable" call from partner "client"
]]>
</message>
<details id="0" />
- <detailsTemplate>
- <![CDATA[ <inputVariable><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="payload"><toReplace id="0"/></part></inputVariable>
]]>
</detailsTemplate>
</event>
- <event to="Invoke_fileService_SyncFileReadOperation_InputVariable_1" sid="BpSeq0.3" cat="2" type="1" wikey="40001-BpAss0-BpSeq0.3-2" n="5" date="2009-09-08T10:14:48.189+03:00">
- <message>
- <![CDATA[ Updated variable "Invoke_fileService_SyncFileReadOperation_InputVariable_1"
]]>
</message>
- <details>
- <![CDATA[
<Invoke_fileService_SyncFileReadOperation_InputVariable_1><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="Empty"><empty xmlns="http://xmlns.oracle.com/pcbpel/adapter/file/fileReadService/">
<ns1:input xmlns:ns1="http://xmlns.oracle.com/file2DbProcess">gdfghf</ns1:input>
</empty>
</part></Invoke_fileService_SyncFileReadOperation_InputVariable_1>
]]>
</details>
</event>
- <event sid="BpSeq0.3" cat="2" type="4" wikey="40001-BpInv0-BpSeq0.3-3" partnerWSDL="fileReadService.wsdl" n="6" date="2009-09-08T10:14:48.439+03:00">
- <message>
- <![CDATA[ Faulted while invoking operation "SyncFileReadOperation" on provider "fileReadService".
]]>
</message>
- <details>
- <![CDATA[
<messages><input><Invoke_fileService_SyncFileReadOperation_InputVariable_1><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="Empty"><empty xmlns="http://xmlns.oracle.com/pcbpel/adapter/file/fileReadService/">
<ns1:input xmlns:ns1="http://xmlns.oracle.com/file2DbProcess">gdfghf</ns1:input>
</empty>
</part></Invoke_fileService_SyncFileReadOperation_InputVariable_1></input><fault><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
</part><part name="summary"><summary>file:/C:/OracleBpel/10.1.3.1/OraBPEL_1/bpel/domains/default/tmp/.bpel_file2DbProcess_v2009_09_08__36696_083f54f05823204c42612c5188057cd4.tmp/fileReadService.wsdl [ SyncFileReadOperation_ptt::SyncFileReadOperation(Empty,SampledataCollection) ] - WSIF JCA Execute of operation 'SyncFileReadOperation' failed due to: Error while translating.
Error occured while translating content from file C:\JDeveloperStudio10131\jdev\mywork\inputs\fileRead\csvFileInput.csv [Caused by: Start of root element expected.]
; nested exception is:
ORABPEL-11008
Error while translating.
Error occured while translating content from file C:\JDeveloperStudio10131\jdev\mywork\inputs\fileRead\csvFileInput.csv [Caused by: Start of root element expected.]
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
</summary>
</part><part name="detail"><detail>null</detail>
</part></bindingFault></fault></messages>
]]>
</details>
</event>
- <event sid="BpSeq0.3" cat="2" type="4" wikey="40001-BpInv0-BpSeq0.3-3" n="7" date="2009-09-08T10:14:48.439+03:00">
- <message>
- <![CDATA[ "{http://schemas.oracle.com/bpel/extension}bindingFault" has been thrown.
]]>
</message>
- <details>
- <![CDATA[
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
</part><part name="summary"><summary>file:/C:/OracleBpel/10.1.3.1/OraBPEL_1/bpel/domains/default/tmp/.bpel_file2DbProcess_v2009_09_08__36696_083f54f05823204c42612c5188057cd4.tmp/fileReadService.wsdl [ SyncFileReadOperation_ptt::SyncFileReadOperation(Empty,SampledataCollection) ] - WSIF JCA Execute of operation 'SyncFileReadOperation' failed due to: Error while translating.
Error occured while translating content from file C:\JDeveloperStudio10131\jdev\mywork\inputs\fileRead\csvFileInput.csv [Caused by: Start of root element expected.]
; nested exception is:
ORABPEL-11008
Error while translating.
Error occured while translating content from file C:\JDeveloperStudio10131\jdev\mywork\inputs\fileRead\csvFileInput.csv [Caused by: Start of root element expected.]
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
</summary>
</part><part name="detail"><detail>null</detail>
</part></bindingFault>
]]>
</details>
</event>
- <event sid="BpPrc0.1" cat="2" type="4" n="8" date="2009-09-08T10:14:48.439+03:00">
- <message>
- <![CDATA[ "BPELFault" has not been caught by a catch block.
]]>
</message>
</event>
- <event sid="BpPrc0.1" cat="1" type="2" n="9" date="2009-09-08T10:14:48.455+03:00">
- <message>
- <![CDATA[ _cl_
]]>
</message>
</event>
- <event sid="BpSeq0.3" cat="1" type="2" n="10" date="2009-09-08T10:14:48.455+03:00">
- <message>
- <![CDATA[ _cl_
]]>
</message>
</event>
- <event sid="BpPrc0.1" cat="2" type="2" n="11" date="2009-09-08T10:14:48.470+03:00">
- <message>
- <![CDATA[ BPEL process instance "40001" cancelled
]]>
</message>
</event>
</audit-trail> -
Error -5000 and -3253 while downloading
i just bought the Beatles box set
it is composed of songs, videos and LPs
on most of the LP (read here most not all) i have the error -5000
and on 2 videos i have error -3253
from what i have understood error -5000 if a problem with access permissions on my computer
if so why some LP have been correctly downloaded and others don't?
and what is error -3253?I just spent over an hour on the phone and working through Remote Advisor w/an Apple Technician (AT) going through a plethora of troubleshooting items - all to no avail.
The AT did provide me with his/her specific contact information and promised to get back to me with an update within 24-hours. Although there is no resolution at this time, I do at least have the comfort knowing that this issue has indeed been forwarded to the Engineering team for them to review and address.
I just hope that this is resolved sooner rather than later.
And as an FYI I did suggest that they check out the Community Forums to get better understanding that this is not an issue specific to me alone but to a much broader group. -
The error message goes on to say, Please check your device settings or consult your device documentation regarding resolving writing errors. Which device do you think they are referring to? The message came up half way through writing Track 5. So I selected a second set of tracks and got the same error message, this time at Track 3. I tried to play written CD (imation CD-R 1x 52x 700 mb). Opened the tracks using Windows Media Player. First time I was able to play one or two tracks, next time Window Media Player gave me the error message error message C00D0FAB. I have twice before successfully recorded the tracks using a Rode Podcaster, mixed them down and successfully wrote two version of my audio book. Now its not working. Any solutions?
David GW wrote:
The error message goes on to say, Please check your device settings or consult your device documentation regarding resolving writing errors. Which device do you think they are referring to?
Sorry, but I would have thought that this was rather obvious! The only device capable of being written to under these circumstances is your CD drive; after all, it's a CD you are trying to create...
You have two potential major causes of problems here. The most common cause of these difficulties is the disks themselves - you only need a batch with poor reflectivity to cause all sorts of read errors, so that's the first thing to try - using a different brand of disk to write to. The second thing you have to realise is that CD writers have a finite life - the lasers in them simply don't last for ever, and towards the end of their lives the power behaviour tends to be a bit erratic, and it tends to fall off somewhat - which causes the same sorts of errors, simply because the dye doesn't get evaporated efficiently. This causes mis-formed pits, hence the read errors. The only solution here is to install a new drive.
When it comes to reading, commercial CDs have a much higher reflectivity than ones you write yourself, so often these will play whilst your own will fail - a common cause of confusion, this. But it's worth checking; if you get failures to reproduce all of the tracks from a commercial pressed CD, then almost certainly your drive is failing. -
Getting an error as "Access denied" while writing the data into CRM 2013?
Hi,
I have written code in Script component Transformation to connect CRM 2013. I have used CRM 2013 SDK to connect it.
#region
Help: Introduction to the Script Component
/* The Script Component allows you to perform virtually any operation that can be accomplished in
* a .Net application within the context of an Integration Services data flow.
* Expand the other regions which have "Help" prefixes for examples of specific ways to use
* Integration Services features within this script component. */
#endregion
#region
Namespaces
using
System;
using
System.Data;
using
Microsoft.SqlServer.Dts.Pipeline.Wrapper;
using
Microsoft.SqlServer.Dts.Runtime.Wrapper;
using
Microsoft.Xrm.Sdk;
using
Microsoft.Xrm.Sdk.Query;
using
Microsoft.Xrm.Sdk.Client;
using
Microsoft.Xrm.Sdk.Messages;
using
System.ServiceModel;
using
System.ServiceModel.Description;
#endregion
[Microsoft.SqlServer.Dts.Pipeline.
SSISScriptComponentEntryPointAttribute]
public
classScriptMain:
UserComponent
//This
method is called once, before rows begin to be processed in the data flow.
///You
can remove this method if you don't need to do anything here.
IOrganizationServiceorganizationservice;
// Variables for the CRM webservice credentials
// You could also declare them in the PreExecute
// if you don't use it anywhere else
stringCrmUrl =
stringCrmDomainName =
stringCrmUserName =
stringCrmPassWord =
publicoverridevoidPreExecute()
base.PreExecute();
* Add your code here
CrmUrl =
this.Variables.CrmWebservice.ToString();
CrmDomainName =
this.Variables.CrmDomainName.ToString();
CrmUserName =
this.Variables.CrmUserName.ToString();
CrmPassWord =
this.Variables.CrmPassWord.ToString();
// Connect to webservice with credentials
ClientCredentialscredentials =
newClientCredentials();
credentials.UserName.UserName =
string.Format("{0}\\{1}",
CrmDomainName, CrmUserName);//"[email protected]";
credentials.UserName.Password = CrmPassWord;
organizationservice =
newOrganizationServiceProxy(newUri(CrmUrl),
null, credentials,
null);
///This
method is called after all the rows have passed through this component.
///You
can delete this method if you don't need to do anything here.
//</summary>
publicoverridevoidPostExecute()
base.PostExecute();
* Add your code here
///<summary>
///This
method is called once for every row that passes through the component from Input0.
//<param
name="Row">The row that is currently passing through the component</param>
publicoverridevoidInput0_ProcessInputRow(Input0BufferRow)
* Add your code here
EntityContact =
newEntity("Contact");
Contact["Employeeid"] = Row.EmpId;
if (!Row.Prefix_IsNull)
Contact["MiddleName"] = Row.Prefix;
organizationservice.Create(Contact);
I was getting an error when the Create method is called from Organizationservice object and it is executing fine till that method. Could you please suggest me how to go further on this?
Thanks &amp; Regards, AnilHi Anil,
You want to make sure you use lower case for both CRM entity and field names.
In any case, writing a custom script component to talk to CRM may not sound terribly hard, but as soon as you get more business requirements and you deal with more entities, you will find it is not something trivial.
For this reason, we highly recommend you check out a commercial offering which will actually save you a lot of time and effort. Check out our solution at http://www.kingswaysoft.com/products/ssis-integration-toolkit-for-microsoft-dynamics-crm/ for
further details, we offer many integration features for Microsoft Dynamics CRM you can't find elsewhere, such as Upsert, Text Lookup, many-to-many relationship support, various writing actions, etc.
Disclaimer: I work for KingswaySoft
Daniel Cai | http://danielcai.blogspot.com |
@danielcai | Data Integration made easy with
SSIS Integration Toolkit -
Hi to all,
I am loading the data from PSA to DSO, while running DTP, after some records load a run time error coming DBIF_RSQL_SQL_ERROR or DBIF_REPO_SQL_ERROR .
Also i tried the Number of Processes reduce from 3 to 1 in DTP, but still same error .
i have searched the SDN and found that it is due to table space problem.
if it is due to table space , how i will find it and how to correct it.
Please can any one tell we why it is coming and what is the solution for that.
i shall be thankful to you for this.
Regards
Pavneet RanaThanks for reply,
i have checked ST22 . and found the error text for 2 runtime error .
first for DBIF_RSQL_SQL_ERROR
second for DBIF_REPO_SQL_ERROR
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Date and Time 14.03.2011 22:00:21
Short text
SQL error in the database when accessing a table.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
How to correct the error
Database error text........: "SQL30081N A communication error has been
detected. Communication protocol being used: "TCP/IP". Communication API being
used: "SOCKETS". Location where the error was detected: "200.1.1.66".
Communication function detecting the error: "recv". Protoco"
Internal call code.........: "[RSQL/FTCH/RSBMONMESS ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"CL_RSBM_LOG_REQUEST_ROOT======CP" or "CL_RSBM_LOG_REQUEST_ROOT======CM00F"
"GET_STATIC_BUFFER"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"GET_STATIC_BUFFER" "(METHOD)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
To prevent the exception, note the following:
Information on where terminated
Termination occurred in the ABAP program "CL_RSBM_LOG_REQUEST_ROOT======CP" -
in "GET_STATIC_BUFFER".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 29
of the (Include) program "CL_RSBM_LOG_REQUEST_ROOT======CM00F".
The program "CL_RSBM_LOG_REQUEST_ROOT======CP" was started as a background job.
Job Name....... "BIDTPR_2256_1"
Job Initiator.. " a"
Job Number..... 18254200
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
procedure "GET_STATIC_BUFFER" "(METHOD)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "CL_RSBM_LOG_REQUEST_ROOT======CP "; its source
code begins in line
1 of the (Include program "CL_RSBM_LOG_REQUEST_ROOT======CM00F ".
Source Code Extract
Line SourceCde
1 method get_static_buffer.
2 data l_s_storage type rsbm_s_storage.
3 l_s_storage = get_s_storage( ).
4 check l_s_storage-type = rsbm_c_storagetype-database..
5 delete o_th_nodes_static where logid = n_logid.
6 delete o_t_msg_static where logid = n_logid.
7 delete o_t_logpar_static where logid = n_logid.
8 select *
9 from rsbmnodes connection (l_s_storage-id)
10 appending corresponding fields of table o_th_nodes_static
11 where logid = n_logid.
12
13 data l_count_monmess type sytabix.
14 select count( * ) from rsbmonmess
15 into l_count_monmess
16 where logid = n_logid.
17 if l_count_monmess > 50000.
18 select * from rsbmonmess up to 50000 rows connection (l_s
19 appending corresponding fields of table o_t_msg_static
20 where logid = n_logid
21 and posit < 50
22 order by node posit.
23 else.
24 select * from rsbmonmess connection (l_s_storage-id)
25 appending corresponding fields of table o_t_msg_static
26 where logid = n_logid
27 order by node posit.
28 endif.
>>>>> select * from rsbmlogpar
30 appending corresponding fields of table o_t_logpar_static
31 where logid = n_logid.
32 field-symbols: <l_s_nodes> type rsbmnodes,
33 <l_s_log> type s_log.
34 read table o_th_log assigning <l_s_log>
35 with table key logid = n_logid.
36 if sy-subrc <> 0.
37 break hoeferf. "
38 endif.
39 loop at o_th_nodes_static assigning <l_s_nodes>.
40 if <l_s_nodes>-node > <l_s_log>-maxnode.
41 <l_s_log>-maxnode = <l_s_nodes>-node.
42 endif.
43 endloop.
44 * --- set datapackage buffer
45 cl_rsbk_dp_state=>free_buffer( n_requid ).
46 cl_rsbk_dp_state=>fill_buffer( n_requid ).
47 endmethod.
Runtime Errors DBIF_REPO_SQL_ERROR
Date and Time 14.03.2011 15:34:32
Short text
SQL error "-99999" occurred when accessing program
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrato
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
How to correct the error
Database error text........: "CLI0108E Communication link failure.
SQLSTATE=40003"
Triggering SQL statement...: "CX_SY_NATIVE_SQL_ERROR========CP "
Internal call code.........: "[REPO/*/43/LOAD/CX_SY_NATIVE_SQL_ERROR===
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_REPO_SQL_ERROR" " "
"SAPLSYDB" or "LSYDBU27"
"DB_COMMIT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Information on where terminated
Termination occurred in the ABAP program "SAPLSYDB" - in "DB_COMMIT".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 7
of the (Include) program "LSYDBU27".
The program "SAPLSYDB" was started as a background job.
Job Name....... "BIDTPR_2252_1"
Job Initiator.. "A"
Job Number..... 12541100
Source Code Extract
Line SourceCde
1 FUNCTION DB_COMMIT.
2 *"----------------------------------------------------------------------
3 *"*"Lokale Schnittstelle:
4 *"----------------------------------------------------------------------
5
6 EXEC SQL.
>>>>> COMMIT WORK
8 ENDEXEC.
9
10 ENDFUNCTION
please can any one tell me cause for runtime error.
i shall be thankful to you for this.
regards
pavneet rana
Edited by: pavneet rana on Mar 15, 2011 1:29 PM -
I am attaching a simplified version of the code I am having trouble with. I am attempting to send an AO signal (1000 Hz) across three seperate channels on a USB 6229 board. I continue to get the error 200288 saying "attempted to write a sample beyond the final sample generated."
If I run in continuous mode instead of finite then I get the error 200609 saying my buffer size is too small. I have attempted to change the buffer size but I can't seem to make anything work. Any help would be great. Thanks
Attachments:
test output.vi 94 KBHi,
I have been looking into this issue for you but for me to proceed any further I need a little more information.
Would you be able to clarify exactly what you are trying to do? Would you be able to provide an example of the kind of signal you need to output? Do you need to configure the buffer yourself or are you ok letting LabVIEW do it automatically?
Tom Clark
Applications Engineer
National Instruments UK & Ireland -
Unknown error (-48 and -208) while trying to sync ipod
I plug in my ipod to sync it and several things happen. First, it will flash in and out of itunes every few minutes, as if sometimes it is not recognizing that it is connected. When it does recognize it, I get a -48 or a -208 error message saying it cannot be synced. Occasionally it will stay connected for a few minutes, and the status bar at the top will say "updating ipod," but it really isn't. Any ideas?
see if this helps
http://discussions.apple.com/thread.jspa?threadID=432369 -
Hello guys, i have an issue restoring my iphone 4... 1 was charging it and suddendly black screen appears.. just with apple logo when i connect charger, when charger is disconnected just black screen.. y though that was battery problem, i bought new one and is already installed.. now, same problem.. y research internet and i found that the solution could be restoring it.. so.. i turn it into DFU mode (Itunes mode) now i just see ituns logo on screen when i connect..
I have last version of Itunes (11.1.4) on my computer and i Had last IOS in my iphone 4.. when i try to restore first of all i see error 21.. i did something for fix hosts file and now i see error 3004..
I really apreciatte if somebody can help me, i don´t know what shall i do..
By the way. my iphone 4 is completely original.. i mean.. not jailbrake
Please help
Thanks allerror 21
https://discussions.apple.com/message/18198103#18198103
erroer 3004
https://discussions.apple.com/message/23878993#23878993
https://discussions.apple.com/thread/4034118 -
Error while writing the data into the file . can u please help in this.
The following error i am getting while writing the data into the file.
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="code">
<code>null</code>
</part>
<part name="summary">
<summary>file:/C:/oracle/OraBPELPM_1/integration/orabpel/domains/default/tmp/
.bpel_MainDispatchProcess_1.0.jar/IntermediateOutputFile.wsdl
[ Write_ptt::Write(Root-Element) ] - WSIF JCA Execute of operation
'Write' failed due to: Error in opening
file for writing. Cannot open file:
C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\
BPEL_Import_with_Dynamic_Transformation\WORKDIRS\SampleImportProcess1\input for writing. ;
nested exception is: ORABPEL-11058 Error in opening file for writing.
Cannot open file: C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\
BPEL_Import_with_Dynamic_Transformation
\WORKDIRS\SampleImportProcess1\input for writing. Please ensure 1.
Specified output Dir has write permission 2.
Output filename has not exceeded the max chararters allowed by the
OS and 3. Local File System has enough space
.</summary>
</part>
<part name="detail">
<detail>null</detail>
</part>
</bindingFault>Hi there,
Have you verified the suggestions in the error message?
Cannot open file: C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\BPEL_Import_with_Dynamic_Transformation\WORKDIRS\SampleImportProcess1\input for writing.
Please ensure
1. Specified output Dir has write permission
2. Output filename has not exceeded the max chararters allowed by the OS and
3. Local File System has enough space
I am also curious why you are writing to a directory with the name "..\SampleImportProcess1\input" ? -
hi,
as part of my requirement , i have to perform read and write operations of few files [ using the file upload control in my custom visual web part] and on submit button click.
but while writing these files - with the help of fileupload control - and when i use myfileupload.saveas(mylocation);
- i am saving these files into my D:\ drive of my server , where i am executing my code -, am getting access denied error.
it throws system.unauthorizedexception.
i have given full control on that folder where i was trying to store my attached files. and also after following asp.net forums,
i have added iusr group added and performed all those steps such that, the file is saved in my D:\ drive.
but unfortunately that didnt happen.
also
a) i am trying the code with runwithelevatedprivileges(delegate() ) code
b) shared the drive within the d :drive where i want o save the files.
c) given the full privieleges for the app pool identity- in my case , its
network service.
the other strange thing is that, the same code works perfectly in other machine, where the same sp, vs 2012 etc were installed .
would like to know, any other changes/ steps i need to make it on this server, where i am getting the error.
help is appreciated!vishnuS1984 wrote:
Hi Friends,
I have gone through scores of examples and i am failing to understand the right thing to be done to copy a file from one directory to another. Here is my class...So let's see... C:\GetMe1 is a directory on your machine, right? And this is what you are doing with that directory:
public static void copyFiles(File src, File dest) throws IOException
// dest is a 'File' object but represents the C:\GetMe1 directory, right?
fout = new FileOutputStream (dest);If it's a directory, where in your code are you appending the source file name to the path, before trying to open an output stream on it? You're not.
BTW, this is awful:
catch (IOException e)
IOException wrapper = new IOException("copyFiles: Unable to copy file: " +
src.getAbsolutePath() + "to" + dest.getAbsolutePath()+".");
wrapper.initCause(e);
wrapper.setStackTrace(e.getStackTrace());
throw wrapper;
}1) You're hiding the original IOException and replacing it with your own? For what good purpose?
2) Even if you had a good reason to do that, this would be simpler and better:
throw new IOException("your custom message goes here", e);
rather than explicitly invokign initCause and setStackTrace. Yuck! -
EXPORT XFA error while writing XFA files
Hello Experts,
We are facing an error while exporting to PDF from BEx report.
We are on EP7 SP14. BI on SP16.
After the report is displayed and Export to PDF button is clicked, a new window opens which shows following:
1. Error:
Message: No message was provided.
Stack trace: java.lang.NullPointerException
at com.sap.ip.bi.export.model.layout.impl.Margins.<init>(Margins.java:32)
at com.sap.ip.bi.export.model.layout.impl.CellLayout.<init>(CellLayout.java:48)
at com.sap.ip.bi.export.model.layout.impl.CellLayout.dub(CellLayout.java:57)
at com.sap.ip.bi.export.xfa.xftextensions.TableContentIterator.createCell(TableContentIterator.java:170)
at com.sap.ip.bi.export.xfa.xftextensions.TableContentIterator.next(TableContentIterator.java:104)
at com.sap.ip.bi.export.xfa.xftextensions.TableSubFormSet.writeXFD(TableSubFormSet.java:1189)
at com.sap.ip.bi.export.xfa.core.Xft_subform.writeXFD(Xft_subform.java:1604)
at com.sap.ip.bi.export.xfa.core.Xft_subform.writeXFD(Xft_subform.java:1604)
at com.sap.ip.bi.export.xfa.core.Xft_template.writeXFD(Xft_template.java:216)
at com.sap.ip.bi.export.xfa.core.Xft.writeXFD(Xft.java:62)
at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:294)
at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:96)
at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:626)
at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:405)
at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:325)
at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:71)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:593)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:132)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:349)
at com.sap.ip.bi.webapplications.runtime.impl.Page.buildRenderingTree(Page.java:4494)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:4568)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:4204)
at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4150)
at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:2948)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2794)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:994)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller._processRequest(Controller.java:883)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:860)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService._handleRequest(BIRuntimeService.java:359)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:276)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:24)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java
:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Message: EXPORT XFA error while writing XFA files
Stack trace: com.sap.ip.bi.base.exception.BIBaseRuntimeException: EXPORT XFA error while writing XFA files
at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:311)
at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:96)
at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:626)
at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:405)
at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:325)
at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:71)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:593)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:132)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:349)
at com.sap.ip.bi.webapplications.runtime.impl.Page.buildRenderingTree(Page.java:4494)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:4568)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:4204)
at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4150)
at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:2948)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2794)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:994)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller._processRequest(Controller.java:883)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:860)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService._handleRequest(BIRuntimeService.java:359)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:276)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:24)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java
:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: java.lang.NullPointerException
at com.sap.ip.bi.export.model.layout.impl.Margins.<init>(Margins.java:32)
at com.sap.ip.bi.export.model.layout.impl.CellLayout.<init>(CellLayout.java:48)
at com.sap.ip.bi.export.model.layout.impl.CellLayout.dub(CellLayout.java:57)
at com.sap.ip.bi.export.xfa.xftextensions.TableContentIterator.createCell(TableContentIterator.java:170)
at com.sap.ip.bi.export.xfa.xftextensions.TableContentIterator.next(TableContentIterator.java:104)
at com.sap.ip.bi.export.xfa.xftextensions.TableSubFormSet.writeXFD(TableSubFormSet.java:1189)
at com.sap.ip.bi.export.xfa.core.Xft_subform.writeXFD(Xft_subform.java:1604)
at com.sap.ip.bi.export.xfa.core.Xft_subform.writeXFD(Xft_subform.java:1604)
at com.sap.ip.bi.export.xfa.core.Xft_template.writeXFD(Xft_template.java:216)
at com.sap.ip.bi.export.xfa.core.Xft.writeXFD(Xft.java:62)
at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:294)
2. Message:
No metadata is available for "DISABLE_NAVIGATION":
<parameterList>
<param name="BI_COMMAND_TYPE" value="OPEN_DIALOG_DISABLE_NAVIGATION"/>
<param name="TARGET_DIALOG_REF" value="DISABLE_NAVIGATION"/>
</parameterList>
In this window, complete screen of report is displayed as an image instead of PDF.
Please let me know if anybody faced similar issue earlier.
It was working perfect earlier, but suddenly error started.
regards
Kedar KulkarniNo proper findings, but issue resolved.
Problem i found that we got a domain change and service values were not refreshed until we apply new patch.
So when we applied patch level 6 on BI WEBAPP& BI BASE S URL for ADS got refreshed and we faced the issue.
After resetting the URL to new domain problem got resolved.
Regards
Kedar Kulkarni -
Hi,
i' m working on jdeveloper 10.1.3.1.0 and when i want to add a partner link to my BPEL project i get 'error while writing wsdl file' 'exception null' error then i couldn't create file.
so how can i solve this problem?
HELP:)Once the wrapper procedure is created by the adapter, the adapter does a second search to obtain the information about the wrapper (i.e. parameters, their data types, etc.). What's likely happening here is that the wrapper is getting created, but the adapter can't find it. The XSD is based on the wrapper, so if it can't be found, then no XSD can be generated. Try removing the existing wrapper package or choose that option in the wizard when it generates a new one.
Maybe you are looking for
-
Multiple Users / One Unity Voicemail Box
When you have one box that has multiple users that can access it, is there a way to limit the access to the box to one user at a time? I can't find where or if this is even an option to do.
-
3D TV. Samsung, LG?
I'm going to buy 3D TV. Samsung, LG which brand is better?
-
How to do a Report bursting?
Post Author: anshubit CA Forum: Administration Hi , I have a requirement where I need to design a report (either WebI or Deki) in BO XI R2 environment. When the report is deployed in Infoview, then user's should be able to view only those data which
-
Break Formatting w/out Break Sums
I would like to create a report with break formatting on the first column and a grand total of the second column at the end of the report, but no totals per break on the first column. For example, what I would like is something like this, Employee
-
Suitable layout manager for adding JToolbar?
Hi there, I'm new to Java Swing. I'm looking to add a toolbar to the top of a JFrame. I've created a Grid layout with 3 rows and no columns. I've placed the JToolbar in the first row. Unfortunately, each row in the grid is of equal size so the toolba