Error -2147467259. Data too long for column 'X' at row 1.
I am new to SQL and I get this error when I try to add another row into the SQL database whose width is different that the corresponding element on the previous row.
For eg
If I enter the string "test" as the an element in the first row, there is no error. However, if I enter "test1" , it throws the following error. I set the data type as string and size to 0( max length for SQL).
Any help is appreciated.
Thanks
HP
Stringcol sounds like a number, no? Without seeing your table definition it's hard to say, but most likely the error is correct, you're trying to enter e.g. a 5 byte string into an integer field (which is 4 bytes), or similar.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV
Similar Messages
-
SQL Error: ORA-12899: value too large for column
Hi,
I'm trying to understand the above error. It occurs when we are migrating data from one oracle database to another:
Error report:
SQL Error: ORA-12899: value too large for column "USER_XYZ"."TAB_XYZ"."COL_XYZ" (actual: 10, maximum: 8)
12899. 00000 - "value too large for column %s (actual: %s, maximum: %s)"
*Cause: An attempt was made to insert or update a column with a value
which is too wide for the width of the destination column.
The name of the column is given, along with the actual width
of the value, and the maximum allowed width of the column.
Note that widths are reported in characters if character length
semantics are in effect for the column, otherwise widths are
reported in bytes.
*Action: Examine the SQL statement for correctness. Check source
and destination column data types.
Either make the destination column wider, or use a subset
of the source column (i.e. use substring).
The source database runs - Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
The target database runs - Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
The source and target table are identical and the column definitions are exactly the same. The column we get the error on is of CHAR(8). To migrate the data we use either a dblink or oracle datapump, both result in the same error. The data in the column is a fixed length string of 8 characters.
To resolve the error the column "COL_XYZ" gets widened by:
alter table TAB_XYZ modify (COL_XYZ varchar2(10));
-alter table TAB_XYZ succeeded.
We now move the data from the source into the target table without problem and then run:
select max(length(COL_XYZ)) from TAB_XYZ;
-8
So the maximal string length for this column is 8 characters. To reduce the column width back to its original 8, we then run:
alter table TAB_XYZ modify (COL_XYZ varchar2(8));
-Error report:
SQL Error: ORA-01441: cannot decrease column length because some value is too big
01441. 00000 - "cannot decrease column length because some value is too big"
*Cause:
*Action:
So we leave the column width at 10, but the curious thing is - once we have the data in the target table, we can then truncate the same table at source (ie. get rid of all the data) and move the data back in the original table (with COL_XYZ set at CHAR(8)) - without any issue.
My guess the error has something to do with the storage on the target database, but I would like to understand why. If anybody has an idea or suggestion what to look for - much appreciated.
Cheers.843217 wrote:
Note that widths are reported in characters if character length
semantics are in effect for the column, otherwise widths are
reported in bytes.You are looking at character lengths vs byte lengths.
The data in the column is a fixed length string of 8 characters.
select max(length(COL_XYZ)) from TAB_XYZ;
-8
So the maximal string length for this column is 8 characters. To reduce the column width back to its original 8, we then run:
alter table TAB_XYZ modify (COL_XYZ varchar2(8));varchar2(8 byte) or varchar2(8 char)?
Use SQL Reference for datatype specification, length function, etc.
For more info, reference {forum:id=50} forum on the topic. And of course, the Globalization support guide. -
I am getting error "ORA-12899: value too large for column".
I am getting error "ORA-12899: value too large for column" after upgrading to 10.2.0.4.0
Field is updating only through trigger with hard coded value.
This happens randomly not everytime.
select * from v$version
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Table Structure
desc customer
Name Null? Type
CTRY_CODE NOT NULL CHAR(3 Byte)
CO_CODE NOT NULL CHAR(3 Byte)
CUST_NBR NOT NULL NUMBER(10)
CUST_NAME CHAR(40 Byte)
RECORD_STATUS CHAR(1 Byte)
Trigger on the table
CREATE OR REPLACE TRIGGER CUST_INSUPD
BEFORE INSERT OR UPDATE
ON CUSTOMER FOR EACH ROW
BEGIN
IF INSERTING THEN
:NEW.RECORD_STATUS := 'I';
ELSIF UPDATING THEN
:NEW.RECORD_STATUS := 'U';
END IF;
END;
ERROR at line 1:
ORA-01001: invalid cursor
ORA-06512: at "UPDATE_CUSTOMER", line 1320
ORA-12899: value too large for column "CUSTOMER"."RECORD_STATUS" (actual: 3,
maximum: 1)
ORA-06512: at line 1
Edited by: user4211491 on Nov 25, 2009 9:30 PM
Edited by: user4211491 on Nov 25, 2009 9:32 PMSQL> create table customer(
2 CTRY_CODE CHAR(3 Byte) not null,
3 CO_CODE CHAR(3 Byte) not null,
4 CUST_NBR NUMBER(10) not null,
5 CUST_NAME CHAR(40 Byte) ,
6 RECORD_STATUS CHAR(1 Byte)
7 );
Table created.
SQL> CREATE OR REPLACE TRIGGER CUST_INSUPD
2 BEFORE INSERT OR UPDATE
3 ON CUSTOMER FOR EACH ROW
4 BEGIN
5 IF INSERTING THEN
6 :NEW.RECORD_STATUS := 'I';
7 ELSIF UPDATING THEN
8 :NEW.RECORD_STATUS := 'U';
9 END IF;
10 END;
11 /
Trigger created.
SQL> insert into customer(CTRY_CODE,CO_CODE,CUST_NBR,CUST_NAME,RECORD_STATUS)
2 values('12','13','1','Mahesh Kaila','UPD');
values('12','13','1','Mahesh Kaila','UPD')
ERROR at line 2:
ORA-12899: value too large for column "HPVPPM"."CUSTOMER"."RECORD_STATUS"
(actual: 3, maximum: 1)
SQL> insert into customer(CTRY_CODE,CO_CODE,CUST_NBR,CUST_NAME)
2 values('12','13','1','Mahesh Kaila');
1 row created.
SQL> set linesize 200
SQL> select * from customer;
CTR CO_ CUST_NBR CUST_NAME R
12 13 1 Mahesh Kaila I
SQL> update customer set cust_name='tst';
1 row updated.
SQL> select * from customer;
CTR CO_ CUST_NBR CUST_NAME R
12 13 1 tst Urecheck your code once again..somewhere you are using record_status column for insertion or updation.
Ravi Kumar -
Replicat error: ORA-12899: value too large for column ...
Hi,
In our system Source and Target are on the same physical server and in the same Oracle instance. Just different schemes.
Tables on the target were created as 'create table ... as select * from ... source_table', so they have a similar structure. Table names are also similar.
I started replicat, it worked fine for several hours, but when I inserted Chinese symbols into the source table I got an error:
WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, OGGEX1.prm: OCI Error ORA-12899: value too large for column "MY_TARGET_SCHEMA"."TABLE1"."*FIRSTNAME*" (actual: 93, maximum: 40) (status = 12899), SQL <INSERT INTO "MY_TARGET_SCHEMA"."TABLE1" ("USERID","USERNAME","FIRSTNAME","LASTNAME",....>.
FIRSTNAME is Varchar2(40 char) field.
I suppose the problem probably is our database is running with NLS_LENGTH_SEMANTICS='CHAR'
I've double checked tables structure on the target - it's identical with the source.
I also tried to manually insert this record into the target table using 'insert into ... select * from ... ' statement - it works. The problem seems to be in the replicat.
How to fix this error?
Thanks in advance!
Oracle GoldenGate version: 11.1.1.1
Oracle Database version: 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
NLS_LANG: AMERICAN_AMERICA.AL32UTF8
NLS_LENGTH_SEMANTICS='CHAR'
Edited by: DeniK on Jun 20, 2012 11:49 PM
Edited by: DeniK on Jun 23, 2012 12:05 PM
Edited by: DeniK on Jun 25, 2012 1:55 PMI've created the definition files and compared them. They are absolutely identical, apart from source and target schema names:
Source definition file:
Definition for table MY_SOURCE_SCHEMA.TABLE1
Record length: 1632
Syskey: 0
Columns: 30
USERID 134 11 0 0 0 1 0 8 8 8 0 0 0 0 1 0 1 3
USERNAME 64 80 12 0 0 1 0 80 80 0 0 0 0 0 1 0 0 0
FIRSTNAME 64 160 98 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
LASTNAME 64 160 264 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
PASSWORD 64 160 430 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
TITLE 64 160 596 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
Target definition file:
Definition for table MY_TAEGET_SCHEMA.TABLE1
Record length: 1632
Syskey: 0
Columns: 30
USERID 134 11 0 0 0 1 0 8 8 8 0 0 0 0 1 0 1 3
USERNAME 64 80 12 0 0 1 0 80 80 0 0 0 0 0 1 0 0 0
FIRSTNAME 64 160 98 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
LASTNAME 64 160 264 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
PASSWORD 64 160 430 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
TITLE 64 160 596 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
Edited by: DeniK on Jun 25, 2012 1:56 PM
Edited by: DeniK on Jun 25, 2012 1:57 PM -
Although i am entering only one character into the textfield then too it is reflecting the same error.
private void initEvents()
okButton.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
Connection conn = null;
Statement stmt = null;
try{
//STEP 2: Register JDBC driver
Class.forName("oracle.jdbc.driver.OracleDriver");
//STEP 3: Open a connection
System.out.println("Connecting to database...");
conn = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:xe","hr","hr");
//STEP 4: Execute a query
System.out.println("Creating statement...");
stmt = conn.createStatement();
System.out.println(txtField);
String sql = "INSERT INTO DOCTORS VALUES ('"+txtField+"','"+textField_1+"','"+textField_1+"','"+textField_2+"','"+textField_3+"')";
JOptionPane.showMessageDialog(null,"Inserted Successfully!");
ResultSet rs = stmt.executeQuery(sql);
rs.close();
stmt.close();
conn.close();
}catch(SQLException se){
//Handle errors for JDBC
se.printStackTrace();
}catch(Exception e1){
//Handle errors for Class.forName
e1.printStackTrace();
}finally{
//finally block used to close resources
try{
if(stmt!=null)
stmt.close();
}catch(SQLException se2){
}// nothing we can do
try{
if(conn!=null)
conn.close();
}catch(SQLException se){
se.printStackTrace();
}//end finally try
}//end tryWhat is a the size of the text you are trying to insert?
Have you tried the increasing the size of 'Name' column to 658?
Most likely the size of Name column is 20. This isn't enough to fit in the value you are trying to insert.
You can increase the size of the Name column with alter table Hr.doctors modify ( Name column_type (658));
Let me know if this helps.
Regards,
Suntrupth -
Inserted value too large for column error while scheduling a job
Hi Everyone,
I am trying to schedule a PL SQL script as a job in my Oracle 10g installed and running on Windows XP.
While trying to Submit the job I get the error as "Inserted value too large for column:" followed by my entire code. The code is correct - complies and runs in Oracle ApEx's SQL Workshop.
The size of my code is 4136 character, 4348 bytes and 107 lines long. It is a code that sends an e-mail and has a +utl_smtp.write_data([Lots of HTML])+
There is no insert statement in the code whatsoever, the code only queries the database for data...
Any idea as to why I might be getting this error??
Thanks in advance
SidThe size of my code is 4136 character, 4348 bytes and 107 lines long. It is a code that sends an e-mail and has a utl_smtp.write_data(Lots of HTML)SQL variable has maximum size of 4000
-
File_To_RT data truncation ODI error ORA-12899: value too large for colum
Hi,
Could you please provide me some idea so that I can truncate the source data grater than max length before inserting into target table.
Prtoblem details:-
For my scenario read data from source .txt file and insert the data into target table.suppose source file data length exceeds max col length of the target table.Then How will I truncate the data so that data migration will be successful and also can avoid the ODI error " ORA-12899: value too large for column".
Thanks
AnindyaBhabani wrote:
In which step you are getting this error ? If its loading step then try increasing the length for that column from datastore and use substr in the mapping expression.Hi Bhabani,
You are right.It is for Loading SrcSet0 Load data.I have increased the column length for target table data store
and then apply the substring function but it results the same.
If you wanted to say to increase the length for source file data store then please tell me which length ?Physical length or
logical length?
Thanks
Anindya -
Adding virtual column: ORA-12899: value too large for column
I'm using Oracle 11g, Win7 OS, SQL Developer
I'm trying to add virtual column to my test table, but getting ORA-12899: value too large for column error. Below are the details.
Can someone help me in this?
CREATE TABLE test_reg_exp
(col1 VARCHAR2(100));
INSERT INTO test_reg_exp (col1) VALUES ('ABCD_EFGH');
INSERT INTO test_reg_exp (col1) VALUES ('ABCDE_ABC');
INSERT INTO test_reg_exp (col1) VALUES ('WXYZ_ABCD');
INSERT INTO test_reg_exp (col1) VALUES ('ABCDE_PQRS');
INSERT INTO test_reg_exp (col1) VALUES ('ABCD_WXYZ');
ALTER TABLE test_reg_exp
ADD (col2 VARCHAR2(100) GENERATED ALWAYS AS (REGEXP_REPLACE (col1, '^ABCD[A-Z]*_')));
SQL Error: ORA-12899: value too large for column "COL2" (actual: 100, maximum: 400)
12899. 00000 - "value too large for column %s (actual: %s, maximum: %s)"
*Cause: An attempt was made to insert or update a column with a value
which is too wide for the width of the destination column.
The name of the column is given, along with the actual width
of the value, and the maximum allowed width of the column.
Note that widths are reported in characters if character length
semantics are in effect for the column, otherwise widths are
reported in bytes.
*Action: Examine the SQL statement for correctness. Check source
and destination column data types.
Either make the destination column wider, or use a subset
of the source column (i.e. use substring).When I try to select, I'm getting correct results:
SELECT col1, (REGEXP_REPLACE (col1, '^ABCD[A-Z]*_'))
FROM test_reg_exp;Thanks.Yes RP, it working if you give col2 size >=400.
@Northwest - Could you please test the same w/o having a regex clause in col2?
I doubt on the usage of a REGEX in this dynamic col case.
Refer this (might help) -- http://www.oracle-base.com/articles/11g/virtual-columns-11gr1.php
Below snippet from above link.... see if this helps...
>
Notes and restrictions on virtual columns include:
Indexes defined against virtual columns are equivalent to function-based indexes.
Virtual columns can be referenced in the WHERE clause of updates and deletes, but they cannot be manipulated by DML.
Tables containing virtual columns can still be eligible for result caching.
Functions in expressions must be deterministic at the time of table creation, but can subsequently be recompiled and made non-deterministic without invalidating the virtual column. In such cases the following steps must be taken after the function is recompiled:
Constraint on the virtual column must be disabled and re-enabled.
Indexes on the virtual column must be rebuilt.
Materialized views that access the virtual column must be fully refreshed.
The result cache must be flushed if cached queries have accessed the virtual column.
Table statistics must be regathered.
Virtual columns are not supported for index-organized, external, object, cluster, or temporary tables.
The expression used in the virtual column definition has the following restrictions:
It cannot refer to another virtual column by name.
It can only refer to columns defined in the same table.
If it refers to a deterministic user-defined function, it cannot be used as a partitioning key column.
The output of the expression must be a scalar value. It cannot return an Oracle supplied datatype, a user-defined type, or LOB or LONG RAW.
>
Edited by: ranit B on Oct 16, 2012 11:48 PM
Edited by: ranit B on Oct 16, 2012 11:54 PM -
Oracle : ORA-12899: value too large for column
Hi Experts,
I am loading multibyte data from fixed width flat file to Oracle database(which is a utf8 characterset) via Informatica. I have set utf8 as characterset in both source and target definitions.
Source flat file data : Münchener(this flat file data was loaded from external oracle database where data looks like Münchener)
When I load the data I am getting below error
ORA-12899: value too large for column "schema_name"."table"."column" (actual: 513, maximum: 512)
I know we can declare the data type as varchar2(512 char) instead of varchar2(512 byte). Please let me know the other solution to load multibyte data into target utf8 database.You answered your own question and there isn't another solution. You need to increase that column.
alter table "schema_name"."table" ("column" varchar2(513)); ---Though you should increase it to be the max length that column will ever be. If you don't know pad it. Pad it high. Oracle is very good at handling the space with the varchar2 datatype. -
Oracle 11g 64 bit - "Value too large for column" when setting Varchar2
Hello guys,
I have a machine running Oracle 11g - 64bits. And I have a table that contains a VARCHAR2(2000) field.
When I try to set the value of this field to a string that contains double byte characters, I get this error:
ORA-12899: value too large for column "QAPBG1220_11"."MYTABLE"."MYFIELD" (actual: 2433, maximum: 2000).
Although the value I'm setting is only 811 characters (€ sign).
The weird thing is that when I try to run the same query on another PC with Oracle 11g, 32 bits, It runs normally and the values are updated!!
Anyone has any idea about this? It's driving me crazy
Thanks in advance
Zahraacreate table MYTABLE
MYTABLEID NUMBER(10) not null,
MYFIELD VARCHAR2(2000)
alter table MYTABLE
add constraint PK_MYTABLE primary key (MYTABLEID);
INSERT INTO MYTABLE (Mytableid, Myfield) VALUES(1, '€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€fds€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€')
COMMIT;
On the 32 bit, this works fine. I get the record with the values 1 and 2000 euro signs.
On the 64 bits, there is one machine (oracle 11.2.0.1.0) that adds the row, but when I view it, the value shows as "????"
and another machine (oracle 11.1.0.7.0) that throws an error:
- "String Literal is too long" : if there are more than 1333 euro characters
- Value too large for column .... : if there are less than 1333 and more than 666 characters.
Any ideas? -
Hi ,
I have defined a field called "field1" in tableA of varchar2(6)
but i got the following error : ORA-12899: value too large for column "PP"."TABLEA"."FIELD1" (actual: 8, maximum: 6) while trying to insert from a view
i have tried to run the view looking for length of field1 that is greater than 6 but it returns no record
what might be wrong here ? i am using Oracle 10G
pls advise
tks & rgdsORA-12899: value too large for column "PP"."TABLEA"."FIELD1" (actual: 8, maximum: 6)If your column has a length of 6 chars, you cannot put there more than 6 chars. Isn't it clear enough ?
Since you tried to insert a value on 8 charracters, you raised an error.
Since your column is on 6 char length, Oracle cannot return you any row where this column has a length greater than 6.
Nicolas. -
ORA-12899: value too large for column "SYS"."SYS_TEMP_0FD9D6677_2AA50E11"."
Oracle Database:11.2.0.1
OS: AIX6.1
The database is getting the below error in alert log.Can anyone tell me what is the cause of these errors and how they can be rectified.
ORA-12899: value too large for column "SYS"."SYS_TEMP_0FD9D6677_2AA50E11"."C1" (actual: 15, maximum: 13)
ORA-12012: error on auto execute of job 724116
ORA-12899: value too large for column "SYS"."SYS_TEMP_0FD9D6677_2AA50E11"."C1" (actual: 15, maximum: 13)
ORA-06512: at "SYS.PRVT_ADVISOR", line 2693
ORA-06512: at "SYS.DBMS_ADVISOR", line 241
ORA-06512: at "SYS.DBMS_SQLTUNE", line 772
ORA-06512: at line 4
Oracle Database:11.2.0.1
OS: AIX6.1Kuljeet Pal Singh wrote:
ORA-12012: error on auto execute of job 724116
ORA-06512: at "SYS.DBMS_ADVISOR", line 241Appear error is coming from auto task job which is by default running in database from 10PM.
this could be due to bug,check MOS or Raise SR to oracle.I have checked the MOS but did not get any reference to the below error
ORA-12899: value too large for column "SYS"is this cause any harm to my database ?
Edited by: 953053 on Aug 30, 2012 11:36 PM -
Data Profiling - Value too large for column error
I am running a data profile which completes with errors. The error being reported is an ORA 12899 Value too large for column actual (41 maximum 40).
I have checked the actual data in the table and the maximum is only 40 characters.
Any ideas on how to solve this. Even though it completes no actual profile is done on the data due to the error.
OWB version 11.2.0.1
Log file below.
Job Rows Selected Rows Inserted Rows Updated Rows Deleted Errors Warnings Start Time Elapsed Time
Profile_1306385940099 2011-05-26 14:59:00.0 106
Data profiling operations complete.
Redundant column analysis for objects complete in 0 s.
Redundant column analysis for objects.
Referential analysis for objects complete in 0.405 s.
Referential analysis for objects.
Referential analysis initialization complete in 8.128 s.
Referential analysis initialization.
Data rule analysis for object TABLE_NAME complete in 0 s.
Data rule analysis for object TABLE_NAME
Functional dependency and unique key discovery for object TABLE_NAME complete in 0 s.
Functional dependency and unique key discovery for object TABLE_NAME
Domain analysis for object TABLE_NAME complete in 0.858 s.
Domain analysis for object TABLE_NAME
Pattern analysis for object TABLE_NAME complete in 0.202 s.
Pattern analysis for object TABLE_NAME
Aggregation and Data Type analysis for object TABLE_NAME complete in 9.236 s.
Aggregation and Data Type analysis for object TABLE_NAME
Functional dependency and unique key discovery for object TABLE_NAME complete in 0 s.
Functional dependency and unique key discovery for object TABLE_NAME
Domain analysis for object TABLE_NAME complete in 0.842 s.
Domain analysis for object TABLE_NAME
Pattern analysis for object TABLE_NAME complete in 0.187 s.
Pattern analysis for object TABLE_NAME
Aggregation and Data Type analysis for object TABLE_NAME complete in 9.501 s.
Aggregation and Data Type analysis for object TABLE_NAME
Functional dependency and unique key discovery for object TABLE_NAME complete in 0 s.
Functional dependency and unique key discovery for object TABLE_NAME
Domain analysis for object TABLE_NAME complete in 0.717 s.
Domain analysis for object TABLE_NAME
Pattern analysis for object TABLE_NAME complete in 0.156 s.
Pattern analysis for object TABLE_NAME
Aggregation and Data Type analysis for object TABLE_NAME complete in 9.906 s.
Aggregation and Data Type analysis for object TABLE_NAME
Functional dependency and unique key discovery for object TABLE_NAME complete in 0 s.
Functional dependency and unique key discovery for object TABLE_NAME
Domain analysis for object TABLE_NAME complete in 0.827 s.
Domain analysis for object TABLE_NAME
Pattern analysis for object TABLE_NAME complete in 0.187 s.
Pattern analysis for object TABLE_NAME
Aggregation and Data Type analysis for object TABLE_NAME complete in 9.172 s.
Aggregation and Data Type analysis for object TABLE_NAME
Functional dependency and unique key discovery for object TABLE_NAME complete in 0 s.
Functional dependency and unique key discovery for object TABLE_NAME
Domain analysis for object TABLE_NAME complete in 0.889 s.
Domain analysis for object TABLE_NAME
Pattern analysis for object TABLE_NAME complete in 0.202 s.
Pattern analysis for object TABLE_NAME
Aggregation and Data Type analysis for object TABLE_NAME complete in 9.313 s.
Aggregation and Data Type analysis for object TABLE_NAME
Execute data prepare map for object TABLE_NAME complete in 9.267 s.
Execute data prepare map for object TABLE_NAME
Execute data prepare map for object TABLE_NAME complete in 10.187 s.
Execute data prepare map for object TABLE_NAME
Execute data prepare map for object TABLE_NAME complete in 8.019 s.
Execute data prepare map for object TABLE_NAME
Execute data prepare map for object TABLE_NAME complete in 5.507 s.
Execute data prepare map for object TABLE_NAME
Execute data prepare map for object TABLE_NAME complete in 10.857 s.
Execute data prepare map for object TABLE_NAME
Parameters
O82647310CF4D425C8AED9AAE_MAP_ProfileLoader 1 2011-05-26 14:59:00.0 11
ORA-12899: value too large for column "SCHEMA"."O90239B0C1105447EB6495C903678"."ITEM_NAME_1" (actual: 41, maximum: 40)
Parameters
O68A16A57F2054A13B8761BDC_MAP_ProfileLoader 1 2011-05-26 14:59:11.0 5
ORA-12899: value too large for column "SCHEMA"."O0D9332A164E649F3B4D05D045521"."ITEM_NAME_1" (actual: 41, maximum: 40)
Parameters
O78AD6B482FC44D8BB7AF8357_MAP_ProfileLoader 1 2011-05-26 14:59:16.0 9
ORA-12899: value too large for column "SCHEMA"."OBF77A8BA8E6847B8AAE4522F98D6"."ITEM_NAME_2" (actual: 41, maximum: 40)
Parameters
OA79DF482D74847CF8EA05807_MAP_ProfileLoader 1 2011-05-26 14:59:25.0 10
ORA-12899: value too large for column "SCHEMA"."OB0052CBCA5784DAD935F9FCF2E28"."ITEM_NAME_1" (actual: 41, maximum: 40)
Parameters
OFFE486BBDB884307B668F670_MAP_ProfileLoader 1 2011-05-26 14:59:35.0 9
ORA-12899: value too large for column "SCHEMA"."O9943284818BB413E867F8DB57A5B"."ITEM_NAME_1" (actual: 42, maximum: 40)
ParametersFound the answer. It was the database character set for multi byte character sets.
-
Error on reverse on XML: value too large for column
Hi All,
I am trying to reverse engineer while creating the data model on XML technology.
My JDBC URL on data server reads this:
jdbc:snps:xml?d=../demo/abc/CustomerPartyEBO.xsd&s=MYEBO
I get an error while doing the reverse.
java.sql.SQLException: ORA-12899: value too large for column "PINW"."SNP_REV_KEY_COL"."KEY_NAME" (actual: 102, maximum: 100)
After doing some check through selective reverse, found that this is happening only for few tables, whose names are quite longer.
Tried setting the "maximum column name length" and "maximum table name length" to 120 and even higher values on XML technology from Topology Manager. No luck there.
Thanks in advance for any help here.That is not the place to change.
The error states that the SNP_REV_KEY_COL.KEY_NAME in the Work Repository schema PINW has maximum length defined to be 100.
I donot know if Oracle will support this change but you will have to make a change to the Work Repository table SNP_REV_KEY_COL and change the column lengths as a workaround. -
'Value too large for column' error in msql
In my 9ilite database I have a table with a LONG column
In the documentation it says that a LONG column can hold upto 2 GB data
However when I try an insert more than 4097 characters into the column I get the error message on insert 'Value too large for column'
Is this a bug or is the documentation wrong
or am I doing something wrong ?
Any help would be much appreciatedYou have run into some bug in handling intermediate results in Oracle 9i Lite. You can by pass the bug as follows in Java.
public static oracle.lite.poljdbc.BLOB createBlob(Connection conn,
byte[] data)
throws SQLException, IOException
oracle.lite.poljdbc.BLOB blob = new oracle.lite.poljdbc.BLOB(
(oracle.lite.poljdbc.OracleConnection)conn);
OutputStream writer = blob.getBinaryOutputStream();
writer.write(data);
writer.flush();
writer.close();
return blob;
public static void insertRow(Connection conn, int num,
oracle.lite.poljdbc.BLOB blob)
throws SQLException
PreparedStatement ps = conn.prepareStatement(
"insert into TEST_BLOB values (?, ?)");
ps.setInt(1, num);
ps.setBlob(2, blob);
ps.execute();
Maybe you are looking for
-
In other words, my outlook email account correctly identifies spam email and places it automatically into my spam inbox on outlook, but with my iphone and ipad, all the apm emails as well as my "good" emails are coming into my inboxes on my apple dev
-
I've an application done in Swing. I've a JPanel that I wish to paint some objects onto it (mainly circles & arcs). The circles will be stationary while the arcs will change location at fixed time-step. Whenever I've the update of the new positions o
-
How to change quality in movie
guys i was wondering how u change the quality of a movie which i see in sooo many games using a simple on(press){ function. can someone please tell me the code u need to use to change the quality using a button? much appreciated
-
AC 5.3 ERM : Mass Role Import Error
Hi, I am getting the following error while uploading a single role to test the import functionality. "Role not imorted; unable to determine matching business process for (Role Name) in the system" But the Busines Process is available in the system an
-
IndexOf in doc path in Photoshop CS4 js
Hi, I need to get to a part of my doc path and the indexOf doesn't work for some reason: var mySeriesSplit = myDocPath.indexOf ("Series"); Your help is greatly appreceited. Yulia