Error 403--Forbidden while trying to access servlet

          Hi All,
          I am very new to Weblogic server. I have downloaded the 6.1 version of Weblogic
          application server. I tried a simple example in which I have an HTML which calls
          a servlet. I have deployed it on weblogic server using auto deployment feature.
          But when I try to access the html form, it gives me the following error.
          Please can anybody suggest a solution to this problem?
          Thanks,
          Vani
          Error 403--Forbidden
          From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
          10.4.4 403 Forbidden
          The server understood the request, but is refusing to fulfill it. Authorization
          will not help and the request SHOULD NOT be repeated. If the request method was
          not HEAD and the server wishes to make public why the request has not been fulfilled,
          it SHOULD describe the reason for the refusal in the entity. This status code
          is commonly used when the server does not wish to reveal exactly why the request
          has been refused, or when no other response is applicable.

The demo license limits access from browsers to three unique IP addresses.
          When accessed by a fourth IP address, WLS returns '403'. You should see a
          message in the log file about the demo license.
          Mike
          "Vani" <[email protected]> wrote in message
          news:[email protected]...
          >
          > Hi All,
          > I am very new to Weblogic server. I have downloaded the 6.1 version of
          Weblogic
          > application server. I tried a simple example in which I have an HTML which
          calls
          > a servlet. I have deployed it on weblogic server using auto deployment
          feature.
          > But when I try to access the html form, it gives me the following error.
          >
          > Please can anybody suggest a solution to this problem?
          > Thanks,
          > Vani
          >
          > -----------------------------------------------------------------
          >
          > Error 403--Forbidden
          > From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
          > 10.4.4 403 Forbidden
          > The server understood the request, but is refusing to fulfill it.
          Authorization
          > will not help and the request SHOULD NOT be repeated. If the request
          method was
          > not HEAD and the server wishes to make public why the request has not been
          fulfilled,
          > it SHOULD describe the reason for the refusal in the entity. This status
          code
          > is commonly used when the server does not wish to reveal exactly why the
          request
          > has been refused, or when no other response is applicable.
          >
          > -----------------------------------------------------------------

Similar Messages

Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

it seems my subscription had expired so I signed up again.. It was still having trouble so I repeated the sign up process again.. Then it worked perfectly.. Unfortunately, I think I just subscribed twice and need to cancel one of them. Ugh. Such a pain when I'm trying to get this project completed. I'll be canceling at least one of the subscriptions in the morning. Adobe is not my favorite company right now. None of this was intuitive. And trying to get help was an absolute waste of an hour.
Regards,
Nathaniel
[removed by moderator]

In attempting to export a simple 1-page PDF file to Microsoft Word, I incessantly get the following error message: "An error occured [sic] while trying to access the service." Nothing on any of the community forums has helped in any way. I have downloa

In attempting to export a simple 1-page PDF file to Microsoft Word, I incessantly get the following error message:
"An error occured [sic] while trying to access the service."
Nothing on any of the community forums has helped in any way.
I have downloaded a free trial of Acrobat XI Pro -- and that too makes no difference.

while trying to access the service."
That'd be associated with trying to connect to the server(s) for one of the Adobe online subscription services.
(Edit PDF or PDF Pack)
These online services are separate and independent of the desktop application Acrobat.
It appears that you have had / are having internet connection issues.
Be well...

I keep getting "An error has occurred while trying to access the service".

I'm using Adobe Reader to convert pdf. to word for the first time. I keep getting "An error has occurred while trying to access the service". My subscription has gone thru and I am signed in. Help! I need to start using this ASAP

Can you try to use ExportPDF directly on the website https://cloud.acrobat.com/exportpdf
[topic moved to ExportPDF forum]

Getting "Error 403--Forbidden" while accessing ADF bookmarked URL

Hi,
Here am trying to work with an ADF application to suport bookmarking.
Following are the steps I did to create a sample application.
Created a bounded task-flow (user-details.xml), which has the "Method call" as default activity along with an another view activity(userData.jsff page).
This task-flow takes an input parameter "Id" to display user details. In the method call activity user data will be initialized using the given input parameter and then the data will be displayed using userData.jsff page.
Created a view activity (details.jspx page) in adfc-config.xml file.
Marked the "details.jspx" file as bookmark-able by changing "Bookmark property to true" and given a Bookmark URL Parameter "Name is Id and Value is #{pageFlowScope.user_id}".
Dropped the bounded task-flow user-details.xml as a region into the details.jspx file.
Now the user_id which is coming as URL Parameter will be passed to user-details.xml task-flows input parameter value.
Created users.jspx page which lists all the users as home page. In the users.jspx page we'll have a link to user details page with a parameter Id.
By running the application will get users page. When I click on the user details link in the users page, the app showing user details page as expected.
Now I bookmarked the user details page. If I open the bookmarked page in the same tab, it is working fine. But when I open this bookmark in a new tab getting the "Error 403--Forbidden" response.
Bookmarked URL: localhost:7101/BookmarkTestApp-ViewController-context-root/faces/user_details?id=123&_afrWindowMode=0&_afrLoop=4884151149818&_adf.ctrl-state=35yghmx4f_18
When I click the above bookmark in another tab the url is processing for few seconds ( 2 to 3 seconds) and converts to localhost:7101/BookmarkTestApp-ViewController-context-root/ and giving 403 response. At this time it is not touching my beans at all (verified this by running the server in debug mode).
Web.xml looks like:
<?xml version = '1.0' encoding = 'windows-1252'?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
         version="2.5" xmlns="http://java.sun.com/xml/ns/javaee">
<context-param>
    <param-name>javax.faces.STATE_SAVING_METHOD</param-name>
    <param-value>client</param-value>
</context-param>
<context-param>
    <description>If this parameter is true, there will be an automatic check of the modification date of your JSPs, and saved state will be discarded when JSP's change. It will also automatically check if your skinning css files have changed without you having to restart the server. This makes development easier, but adds overhead. For this reason this parameter should be set to false when your application is deployed.</description>
    <param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
    <param-value>false</param-value>
</context-param>
<context-param>
    <description>Whether the 'Generated by...' comment at the bottom of ADF Faces HTML pages should contain version number information.</description>
    <param-name>oracle.adf.view.rich.versionString.HIDDEN</param-name>
    <param-value>true</param-value>
</context-param>
<filter>
    <filter-name>trinidad</filter-name>
    <filter-class>org.apache.myfaces.trinidad.webapp.TrinidadFilter</filter-class>
</filter>
<filter>
    <filter-name>adfBindings</filter-name>
    <filter-class>oracle.adf.model.servlet.ADFBindingFilter</filter-class>
</filter>
<filter-mapping>
    <filter-name>trinidad</filter-name>
    <servlet-name>Faces Servlet</servlet-name>
    <dispatcher>FORWARD</dispatcher>
    <dispatcher>REQUEST</dispatcher>
</filter-mapping>
<filter-mapping>
    <filter-name>adfBindings</filter-name>
    <servlet-name>Faces Servlet</servlet-name>
    <dispatcher>FORWARD</dispatcher>
    <dispatcher>REQUEST</dispatcher>
</filter-mapping>
<listener>
    <listener-class>oracle.adf.mbean.share.config.ADFConfigLifeCycleCallBack</listener-class>
</listener>
<servlet>
    <servlet-name>Faces Servlet</servlet-name>
    <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
    <load-on-startup>1</load-on-startup>
</servlet>
<servlet>
    <servlet-name>resources</servlet-name>
    <servlet-class>org.apache.myfaces.trinidad.webapp.ResourceServlet</servlet-class>
</servlet>
<servlet>
    <servlet-name>BIGRAPHSERVLET</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.graph.GraphServlet</servlet-class>
</servlet>
<servlet>
    <servlet-name>BIGAUGESERVLET</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.gauge.GaugeServlet</servlet-class>
</servlet>
<servlet>
    <servlet-name>MapProxyServlet</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.geoMap.servlet.MapProxyServlet</servlet-class>
</servlet>
<servlet>
    <servlet-name>GatewayServlet</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.graph.FlashBridgeServlet</servlet-class>
</servlet>
<servlet-mapping>
    <servlet-name>Faces Servlet</servlet-name>
    <url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/adf/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/afr/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>BIGRAPHSERVLET</servlet-name>
    <url-pattern>/servlet/GraphServlet/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>BIGAUGESERVLET</servlet-name>
    <url-pattern>/servlet/GaugeServlet/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>MapProxyServlet</servlet-name>
    <url-pattern>/mapproxy/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/bi/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>GatewayServlet</servlet-name>
    <url-pattern>/flashbridge/*</url-pattern>
</servlet-mapping>
<mime-mapping>
    <extension>swf</extension>
    <mime-type>application/x-shockwave-flash</mime-type>
</mime-mapping>
<jsp-config>
    <jsp-property-group>
      <url-pattern>*.jsff</url-pattern>
      <is-xml>true</is-xml>
    </jsp-property-group>
</jsp-config>
</web-app>
Am I missing any thing here.
Thanks in advance.
-Gopal.

https://blogs.oracle.com/DavidGiammona/entry/why_do_i_get_this_error_403_--

Error 403 Forbidden, while publishing a WS

Hi all,
i have defined a web-service in SAP Workbench. now i'm trying to publish it and it simply doesn't work, whatever i try.
after i defined a binding in the SOAMANAGER and want the WSDL for it to be shown, i get
Error 403: Forbidden. Anyone ideas?
im pretty fresh around web services in SAP, so i tried another scenario taken from help-sites. in tr-cd WSPUBLISH i get proxy instantiation error. (i created the Service registry also by myself in tr-cd WSPARAM).
thnx 4 ur help in advance!!!
regards
vasyl

          Hi Bijan,
          thats to less info. We need a little bit more to help you.
          Try looking at the console and tell us what you see.
          Which Version of WLS are you running ??
          fear
          Bijan Mohanty <[email protected]> wrote:
          >Hi,
          >
          >I have deployed a webapp(the war file)by placing it in the config/mydomain/applications
          >dir. The web app is deployed successfully and can be seen in the weblogic
          >console. But while accessing the servlet I am getting the following
          >error. Could somebody please tell me what needs to be done to fix this.
          >
          >Thanks a lot.
          >
          >Bijan.
          >
          >Error 403--Forbidden
          >From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
          >10.4.4 403 Forbidden
          >The server understood the request, but is refusing to fulfill it. Authorization
          >will not help and the request SHOULD NOT be repeated. If the request
          >method was not HEAD and the server wishes to make public why the request
          >has not been fulfilled, it SHOULD describe the reason for the refusal
          >in the entity. This status code is commonly used when the server does
          >not wish to reveal exactly why the request has been refused, or when
          >no other response is applicable

Error "Ajax submit failed: error =403, Forbidden" when trying to sign up

Hi,
I am trying to sign up for eprint, but get this error when ever I try to create an account "Ajax submit failed: error =403, Forbidden" Does anyone have any ideas.
thanks,
Bob

If you are experiencing this issue through the desktop browser, if available, try downloading the mobile app and see if you still experience issues signing up. Another recommendation is to try a different browser (Firefox, Chrome, etc) after restarting your machine.
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

An error has occured while trying to access the service.

I pay an annual fee to beable to convert PDF documents to Word documents. Now I get a message "An error occured whip trying to access the service. Can someone help with this issue?

Hi Lynn,
Just for the test if you have a different computer please try login and check one more time.
Also if you can share any of the document with us i would like to check that personally at my end. And if it is possible for you please let me know when you are getting that error message "An error occured while trying
to access the service". You can send me the document using the private message option: http://forums.adobe.com/thread/1184148
~Ajlan Huda.

Error (-6722) occurred while trying to access the Apple Wireless device

I receive the following error when I press 'manual setup' or 'continue' from within the airport utility:
"An error ocurred while trying to access the Apple wireless device. Make sure your network connection is valid and try again
Error -6722"
Everything is working on the Airport express but I can't run the utility. Should I hazard a reset of the device to factory settings?

Aaaaaaand as I was writing that, I managed to fix it. Not sure how exactly. The variables that were used that worked:
On windows, running AU 5.5.2, right clicking upload firmware in the device list, choosing other, selecting a random firmware other than 7.3 (I think i ended up using 7.4.2) and clicking upload. Instead of trying to communicate with the APExpress, it directly uploaded the firmware and then it restarted, I got a crazy amber blink cycle I have never seen before (Three fast long blinks, and the three short fast blinks, repeat). Then it restarted and it was back to normal. Woohoo! There goes 5 hours of my life.

Error 403 Reported when trying to access web page through a program.

I was writing a program for fun, to try to download a web page, pdf or anything from the web. The program works fine when given local file system path in URL and also works well when i tried to access a page from the tomcat installed on my machine but gives a error 403 when tried to access URL's outside the system. Tried to read about 403, seems that many sites does not allow to access a particular URL directly using the directory structure, you have to pass thru different hyperlinks before reaching resource.
IS THERE ANY WAY THIS PROBLEM CAN BE SOLVED.
import java.io.*;
import java.net.*;
class TestDownload
     public static void main(String[] args)
          try
               URL url = new URL("http://www.webmasterworld.com/forum48/1966.htm");
          //     URL url = new URL("http://localhost:8080/index.html");
          //     URL url = new URL("file:\\C:\\web_2.pdf");
               URLConnection connection = url.openConnection();
               InputStream stream = connection.getInputStream();
               BufferedInputStream in = new BufferedInputStream(stream);
               FileOutputStream file = new FileOutputStream("x.html");
               BufferedOutputStream out = new BufferedOutputStream(file);
               int i;
               while ((i = in.read()) != -1) {
                    out.write(i);
               out.flush();
          catch(IOException e)
               e.printStackTrace();
          System.out.println("Hello World!");
}

I was writing a program for fun, to try to download a web page, pdf or anything from the web. The program works fine when given local file system path in URL and also works well when i tried to access a page from the tomcat installed on my machine but gives a error 403 when tried to access URL's outside the system. Tried to read about 403, seems that many sites does not allow to access a particular URL directly using the directory structure, you have to pass thru different hyperlinks before reaching resource.
IS THERE ANY WAY THIS PROBLEM CAN BE SOLVED.
import java.io.*;
import java.net.*;
class TestDownload
     public static void main(String[] args)
          try
               URL url = new URL("http://www.webmasterworld.com/forum48/1966.htm");
          //     URL url = new URL("http://localhost:8080/index.html");
          //     URL url = new URL("file:\\C:\\web_2.pdf");
               URLConnection connection = url.openConnection();
               InputStream stream = connection.getInputStream();
               BufferedInputStream in = new BufferedInputStream(stream);
               FileOutputStream file = new FileOutputStream("x.html");
               BufferedOutputStream out = new BufferedOutputStream(file);
               int i;
               while ((i = in.read()) != -1) {
                    out.write(i);
               out.flush();
          catch(IOException e)
               e.printStackTrace();
          System.out.println("Hello World!");
}

I am getting the error message "An error has occurred while trying to access the service" when I try to convert to Word. Can you please help

Please help with this error

I'm assuming that you mean the ExportPDF service. How do you access it: from Adobe Reader, or directly on the https://cloud.acrobat.com/exportpdf website? Does the error occur in both instances?
I will move your post to the appropriate forum, but since this is the Adobe shutdown week, you may not get an immediate answer.
[topic moved to ExportPDF forum]

An error has occurred while trying to access service

This is the current error that I'm getting after I start converting. Does anybody know of a fix?

Good day,
Sorry for the delay in getting back to you.
Are you getting this error for all files you try to convert? It sounds like there might be an issue with your firewall that's preventing the completion of uploads to our system. Can you try to access the service from another computer or network?
Kind regards,
David

Ajax submit failed: error =403, Forbidden, Forbidden when trying to register account

I get: "Ajax submit failed: error =403, Forbidden" when trying to register with ePrint
This question was solved.
View Solution.

Tim_H wrote:
Hi BOLAINE,
I'm sorry you're having this problem. The best way to work around it is to try using a different browser. Preferably either nternet Explorer, Firefox, or Chrome.
Let me know if this helps, please.
I having the same problem getting Ajax submit failed=403 when trying to register account. All I have is a new Chromebook. Am I stuck? Don't seem to have an option of other browsers...?
cg

I tried to access my website, but Firefox threw the error: 403 Forbidden, you don't have the permissions to view.

My website - Mousenstein.com - is under construction w/Dreamweaver + Flash.
I uploaded my files to my server.
I opened Firefox and entered the URL:
http://www.mousenstein.com
The error "403 Forbidden" appeared, and ...
You do not have the permissions to access.
I have tried to upload my site countless times, but never successfully - it is a huge headache. That said, I have never gotten the "403 Forbidden - no permissions" before.
All other failures threw the error "404, can not locate the URL "/" on this server.
Any help will be enormously appreciated.
P.S. : Are there permissions preferences on Firefox? I found one under Tools Menu, but it didn't seem to address my problem.
Thanks

I get the same thing with Firefox, IE8, Opera, and Safari. It isn't a Firefox only problem.
Are you new to that webhosting service? <br /> Have you ever uploaded web pages to that same web hosting service previously, pages that worked after an upload? <br /> Are those pages listed as ''' "public" ''' pages in your web hosts control panel?
My suggestion is to "download" your homepage and associated files & images from your PC, up to the server, using your web hosts control panel and see how that works.
Beyond that, I suspect that you might have missed an important setting in Dreanweaver for uploading to the web host's server. You might try asking about this issue at a Dreamweaver support forum.

Error 403-forbidden from IE5 while authenticating a user through NT Realm

Hi,
Before posting this request, I checked the forum until Sep.18 to see if nobody
else experienced my problem, but in vain.
I am using WLS6.1Sp1 under NT4
I would like that NT users for defined NT Primary Domain Controller authenticate
themselves before accessing a web app. For that, I followed thoroughly the BEA
Doc to get the config.xml, web.xml, weblogic.xml and filerealm.properties correctly
configured.
The <auth-method> is set to FORM. The <security-role> and <security-role-assignment>
are also set with business roles and principals from the NT PDC. the <security-constraint>
with all the sub-tags are also defined. etc.etc. When I use the WL console, to
check users and groups lists, it works fine although it takes a lot of time before
being displayed (15 to 20 minutes !!!).
Through a Login.jsp, the user enters his/her login name and password. The result
is that I get the following message :
"Error 403--Forbidden
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.4 403 Forbidden
The server understood the request, but is refusing to fulfill it. Authorization
will not help and the request SHOULD NOT be repeated. If the request method was
not HEAD and the server wishes to make public why the request has not been fulfilled,
it SHOULD describe the reason for the refusal in the entity. This status code
is commonly used when the server does not wish to reveal exactly why the request
has been refused, or when no other response is applicable."
No trace in the log files. No warning . Nothing.
My questions are:
1- Has somebody already experienced this?
2- Could you then help me ?
By advance , thank you very much.
Athmani H.
Note : I can provide you through email the config.xml, web.xml, weblogic.xml and
filerealm.properties and the concerned .jsp files on demand

Hi Jerry,
Many thanks for your interest and your help.
weblogic.properties file for WLS 6.1 SP1? There is none... I do have a filerealm.properties. I didn't state that I was using a weblogic.properties
file.
I checked the URL you proposed. I changed the <Auth-method> from FORM into BASIC.
A pop-up window is displayed requesting the user to enter username and password.
The result is that I get a web page displaying an Error 404 --not found.
Here is the complete error message :"Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given
of whether the condition is temporary or permanent.If the server does not wish
to make this information available to the client, the status code 403 (Forbidden)
can be used instead. The 410 (Gone) status code SHOULD be used if the server knows,
through some internally configurable mechanism, that an old resource is permanently
unavailable and has no forwarding address."
The message is displayed when the browser tries to resolve the following URL :http://localhost:7001/examplesWebApp/j_security_check
Having said that, I had already configured the <security-role-assignement> with
role-name and principals in weblogic.xml, as well as the <security-role> tag in
web.xml.
Thanks for your help
Cheers
Habib
Jerry <[email protected]> wrote:
Hi Athmani,
weblogic.properties file for WLS 6.1 SP1? There is none... weblogic.properties
is in WebLogic
5.1 and lower -- it was changed to config.xml for WLS 6.0 .. what are
you using your
weblogic.properties file for?
Anyways,
I have gotten NTRealms to successfully work with WLS 6.1, with security
on a web app, allowing
NT users to access certain resources. This stuff works.
Since you can see your users and groups through the console (even though
it takes a while) I
think that your NTRealm setup is okay.
I would guess that you have a problem with your deployment descriptors
in your web
application.
There are quite a few posts in this newsgroup that illustrate how to
set up security
constraints on resources in your web app with the deployment descriptors.
For example, check out
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.security&item=6244&utag=
Let me know how it goes, okay?
Cheers,
Joe Jerry
"Athmani H." wrote:
Hi,
Before posting this request, I checked the forum until Sep.18 to seeif nobody
else experienced my problem, but in vain.
I am using WLS6.1Sp1 under NT4
I would like that NT users for defined NT Primary Domain Controllerauthenticate
themselves before accessing a web app. For that, I followed thoroughlythe BEA
Doc to get the config.xml, web.xml, weblogic.xml and filerealm.propertiescorrectly
configured.
The <auth-method> is set to FORM. The <security-role> and <security-role-assignment>
are also set with business roles and principals from the NT PDC. the<security-constraint>
with all the sub-tags are also defined. etc.etc. When I use the WLconsole, to
check users and groups lists, it works fine although it takes a lotof time before
being displayed (15 to 20 minutes !!!).
Through a Login.jsp, the user enters his/her login name and password.The result
is that I get the following message :
"Error 403--Forbidden
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.4 403 Forbidden
The server understood the request, but is refusing to fulfill it. Authorization
will not help and the request SHOULD NOT be repeated. If the requestmethod was
not HEAD and the server wishes to make public why the request has notbeen fulfilled,
it SHOULD describe the reason for the refusal in the entity. This statuscode
is commonly used when the server does not wish to reveal exactly whythe request
has been refused, or when no other response is applicable."
No trace in the log files. No warning . Nothing.
My questions are:
1- Has somebody already experienced this?
2- Could you then help me ?
By advance , thank you very much.
Athmani H.
Note : I can provide you through email the config.xml, web.xml, weblogic.xmland
filerealm.properties and the concerned .jsp files on demand

Error 403--Forbidden while trying to access servlet

Similar Messages

Maybe you are looking for