Error 501b Loadlibrary msvcrt.dll failed
We have Netware 5.1, Zenworks 3 and a mixture of Win2k and Win98
workstations.
When running NAL at one of our sites it comes up with the following error
which has to be OK'd before it will load the NAL.
"Error 501b Loadlibrary msvcrt.dll failed"
The user has read and file scan rights to sys:public
The server has msvcrt.dll version 5.0.0.7022
and the PC has msvcrt.dll version 6.1.9844.0
Does anyone know how to get rid of the error message?
(Some of the files in the public directory were missing, so I have copied
in nal*.* and zen*.* Does it need anything else?)
Thanks
DLLs are normally backwards compatible.
Therefore I would try renaming the version in PUBLIC and replacing it with
the newer version from the PC.
Sounds like perhaps an older one if being used instead of the newer one.
[email protected] wrote:
> We have Netware 5.1, Zenworks 3 and a mixture of Win2k and Win98
> workstations.
>
> When running NAL at one of our sites it comes up with the following error
> which has to be OK'd before it will load the NAL.
>
> "Error 501b Loadlibrary msvcrt.dll failed"
>
> The user has read and file scan rights to sys:public
>
> The server has msvcrt.dll version 5.0.0.7022
> and the PC has msvcrt.dll version 6.1.9844.0
>
> Does anyone know how to get rid of the error message?
>
> (Some of the files in the public directory were missing, so I have copied
> in nal*.* and zen*.* Does it need anything else?)
>
> Thanks
Craig Wilson
CNE3, 4, 5 - MCSE - CCNA
NSC Sysop (http://support.novell.com/forums/)
Tech Writer - http://www.ithowto.com
(I Peter 4:10)
Similar Messages
-
About a month ago, the Desk Manager app stopped recognizing that my blackberry was connected via usb so I decided to remove/reinstall the Blackberry Desktop 4.3 software. Now, everytime I install the software I receive the following message during the installation:Errors 1904.Module C:\Program Files\Research In Motion\Blackberry\IS71 Connectors\OE Connector\OLKExpress5.dll failed to register. HRESULT-2147024770. Contact your support personnel. If I try to manually register the file it fails with the following error "Loadlibrary ("olkexpress5.dll") failed - The specified module could not be found." My the desktop manager currently will recognize my blackberry as long as I don't disconnect the blackberry before first powering off the laptop. Any one have any ideas regarding this issue?
Perform clean uninstall of BlackBerry Desktop Software.
Check for instruction: http://www.blackberry.com/btsc/KB02206
After that go to here: http://na.blackberry.com/eng/services/desktop/
and download the latest (v4.7) BlackBerry Desktop Software.
I recommend to download BlackBerry Desktop Software without Media Manager.
Media manager is not necessary to transfer files to the device and vice versa.
Check this link: HOWTO : use your blackberry as a USB device -
ERROR = DlLoadLib: LoadLibrary(dbsdbslib.dll) Error 126
Hi All,
I'm facing a problem while starting ABAP NW sneak preview system. disp+work.exe is stopped. when I see the trace log. it says the following. Please help.
trc file: "dev_disp", trc level: 1, release: "700"
Fri Jan 26 07:31:37 2007
ERROR => DlLoadLib: LoadLibrary(dbsdbslib.dll) Error 126 [dlnt.c 237]
Error 126 = "The specified module could not be found."
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 68
intno 20050900
make: multithreaded, ASCII, optimized
pid 1784
kernel runs with dp version 216(ext=109) (@(#) DPLIB-INT-VERSION-216)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 1784) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 68 successfully loaded
shared lib "dw_xtc.dll" version 68 successfully loaded
shared lib "dw_stl.dll" version 68 successfully loaded
shared lib "dw_gui.dll" version 68 successfully loaded
shared lib "dw_mdm.dll" version 68 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Jan 26 07:31:42 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5272]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >VIJESH_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6160 (880)
DpShMCreate: sizeof(tm_adm) 3397704 (16904)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1196)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 058D0040, size: 3997896)
DpShMCreate: allocated sys_adm at 058D0040
DpShMCreate: allocated wp_adm at 058D19F0
DpShMCreate: allocated tm_adm_list at 058D3200
DpShMCreate: allocated tm_adm at 058D3230
DpShMCreate: allocated wp_ca_adm at 05C10A78
DpShMCreate: allocated appc_ca_adm at 05C10F28
DpShMCreate: allocated comm_adm at 05C113D8
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05C92288
DpShMCreate: allocated gw_adm at 05C922C8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05C922F8
DpShMCreate: allocated wall_adm at 05C92300
MBUF state OFF
Fri Jan 26 07:31:43 2007
ERROR => ztta/cua_area is 180000. [sapinit.c 963]
ERROR => ztta/cua_area adjusted to 250000. [sapinit.c 967]
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1Hi,
I am facing the same problem. The netweaver 2004s installation was successful without any problems. But the dispatcher stopps with the same error message as you had. Could you resolve the problem?
Thanks for your response in advance.
Shahram -
Error while startup: msvcrt.dll missing
Hi,
on some boxes (maybe windows 2000 ) we get a error while startup: msvcrt71.dll missing ...
what´s the problem ?Andre,
since this is difficult to answer without a detailed description of the use
case, could you please post information about the how and what you are
trying to start, i.e. the command line, the operating system and what
version of JRockit you are using and have installed.
The file msvcr71.dll is needed by a few launchers and libraries inside the
JRockit JDK but those cases should be covered if launching using e.g.
java.exe. The only case that comes to mind is if you are trying to load the
jvm.dll directly, if that is the case you should copy
<jrockit-jdk>/jre/bin/msvcr71.dll to
<jrockit-jdk>/jre/bin/jrockit/msvcr71.dll to see if it helps.
Best Regards
/Robert
<Andre Frintrop> wrote in message news:[email protected]..
Hi,
on some boxes (maybe windows 2000 ) we get a error while startup:
msvcrt71.dll missing ...
what??s the problem ? -
Fatal errors JPINSCP.DLL, MSVCRT.DLL, and KERNEL32.DLL
I run FireFox's newest version, my o/s is Win98SE. I'm having troubles with 3 seperate error messages. MSVCRT.DLL is the first error, I've changed my resolutions, that seems to have corrected that one. Search on errof KERNEL32.DLL gave me results on some spyware, so re-ran all spyware. Now I get error message JPINSCP.DLL and it shuts down my browser. Can you help? Thank you!
Could you give us some more info? JDK/JRE version, fault messages. Have you tried appletviewer or different browser?
-
I am running Lookout 4.0.1. I have a Primary Server, a Standby Server and
7 Clients on an Ethernet Network. My network also has 8 Allen-Bradley SLC
5/05s. When I run my application on my Primary or Standy Server, everything
runs fine. When I try to run my application on any of my Client computers,
I get an Application Error in file "msvcrt.dll" . HELP!!!"Mike Brandenburg" wrote:
>>I am running Lookout 4.0.1. I have a Primary Server, a Standby Server
and>7 Clients on an Ethernet Network. My network also has 8 Allen-Bradley
SLC>5/05s. When I run my application on my Primary or Standy Server, everything>runs
fine. When I try to run my application on any of my Client computers,>I
get an Application Error in file "msvcrt.dll" . HELP!!!
Mike,
The page fault in MSVCRT.dll has been found to occur when the network settings
for the computer have irregularties to them. These irregularities include:
A) Computer Name (Control Panel--> Network Settings--> Identification Tab)
starts with a number
B) Computer Name (Control Panel--> Network Settings--> Identification Tab)
contains non-standard characters suc
h as ',%,#, space, etc...
C) Computer Name (Control Panel--> Network Settings--> Identification Tab)
is too long
D) Computer Name (Control Panel--> Network Settings--> Identification Tab)
does not match host name in DNS settings (Control Panel --> Network Settings
--> TCP-IP Properties --> DNS Configuration Tab) (Note: This will occur even
if DNS is disabled. You should enable DNS, type the correct name, than disable
DNS.
Regards,
Aaron Gelfand -
Regsvr32 sapssoext.dll failed
Hi all.
we have a implemention that using .net to transfer logon ticket from EP sso.
In the .net code example, I see
/// This class performs the calls via Reflection because no further
/// references have to be set, but the COM component in SAPSSOEXT must
/// be registered to the Windows registry:
/// 1) ensure that "regsvr32 sapssoext.dll" component registration was done
/// 2) if a null library property (Cryptlib) is passed, the environment
/// variable SSF_LIB is taken.
Then in my windows 2003 enviorment, I put sapsecu.dll, sapssoext.dll into Windows/system32/ directory
Then I open a command prompt window, type
regsvr32 sapssoext.dll
it returns me fail message ' loadlibrary("sapssoext.dll") failed, couldnot found module '
Whats the problem ?By using
depends.exe,
http://www.dependencywalker.com/
this tool. I found which dll I am missing -
Hi:
I setup PeopleTools 8.53 on Windows7 64bit with Oracle database 11.2.0 32bit,Oracle Tuxedo 11.1.1.2.0 64bit and Oracle WebLogic Server 10.3.6,after run Data Mover,using psadmin.exe to create Application Server,then select:Create a domain,select:smaill,all of the settings flowing:
Quick-configure menu -- domain: ps
Features Settings
========== ==========
1) Pub/Sub Servers : No 16) DBNAME :[ps]
2) Quick Server : No 17) DBTYPE :[ORACLE]
3) Query Servers : No 18) UserId :[PS]
4) Jolt : Yes 19) UserPswd :[PS]
5) Jolt Relay : No 20) DomainID :[TESTSERV]
6) WSL : No 21) AddToPATH :[E:\app\Administrator\product\11.2.0\dbhome_1\BIN]
7) PC Debugger : No 22) ConnectID :[people]
8) Event Notification: Yes 23) ConnectPswd:[people]
9) MCF Servers : No 24) ServerName :[]
10) Perf Collator : No 25) DomainConnectPswd:[]
11) Analytic Servers : Yes 26) WSL Port :[7000]
12) Domains Gateway : No 27) JSL Port :[9000]
28) JRAD Port :[9100]
when boot the domain,PSAPPSRV cann't boot:
exec PSAPPSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" [email protected] -- -D TESTSERV -S PSAPPSRV :
CMDTUX_CAT:1685: ERROR: Application initialization failure
In stderr ,only one message:
LoadLibraryA() in pscompat.dll failed for 'PSORA64.dll': reason=193
In psft\pt\8.53\appserv\ps\LOGS\APPSRV_0223.LOG :
PSAPPSRV.6268 (0) [2013-02-23T23:52:14.146](0) PeopleTools Release 8.53 (Windows) starting. Tuxedo server is APPSRV(99)/2
PSAPPSRV.6268 (0) [2013-02-23T23:52:14.395](0) Cache Directory being used: C:\Users\Administrator\psft\pt\8.53\appserv\ps\CACHE\PSAPPSRV_2\
PSAPPSRV.6268 (0) [2013-02-23T23:52:14.501](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library PSORA64 (200,0)
PSAPPSRV.6268 (0) [2013-02-23T23:52:14.532](0) Database Options: override_connection_reset: 0
PSAPPSRV.6268 (0) [2013-02-23T23:52:14.532](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PS with user PS.
PSAPPSRV.6268 (0) [2013-02-23T23:52:14.539](0) Server failed to start
PSADMIN.6068 (0) [2013-02-23T23:52:21.915](0) End boot attempt on domain ps
In \psft\pt\8.53\appserv\ps\LOGS\TUXLOG.022313:
235208.USER-PC!tmboot.5644.6920.-2: LIBTUX_CAT:1376: WARN: APPDIR value "C:\Users\Administrator\psft\pt\8.53\appserv\pstest" in environment does not match configuration "C:\Users\Administrator\psft\pt\8.53\appserv\ps"
235210.USER-PC!tmboot.5644.6920.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
235210.USER-PC!tmboot.5644.6920.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
235211.USER-PC!PSWATCHSRV.3572.6112.-2: 02-23-2013: Tuxedo Version 11.1.1.2.0 with VS2010, 64-bit
235211.USER-PC!PSWATCHSRV.3572.6112.-2: LIBTUX_CAT:262: INFO: Standard main starting
235213.USER-PC!PSAPPSRV.6268.6076.0: 02-23-2013: Tuxedo Version 11.1.1.2.0 with VS2010, 64-bit
235213.USER-PC!PSAPPSRV.6268.6076.0: LIBTUX_CAT:262: INFO: Standard main starting
235214.USER-PC!PSAPPSRV.6268.6076.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
235214.USER-PC!tmboot.5644.6920.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
How can i fix this error? Thanks in advance.Please, do not hijack other's thread.
-- mod. action: this very thread is old and hijacked, locking it --
Nicolas. -
When I open iTunes I get an error message "MSVCR80.DLL missing". I downloaded this .dll and installed in C:\Windows|System32. I then scanned my computer to fix registry errors.I uninstalled iTunes and reinstalled and got the following error message "Apple Mobile Device failed to start".
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?
try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install. -
When starting the iPlanet Calendar Server(iCS) 2.x on Windows NT, the following
error occurs:<BR>
<P>
The procedure entry point _chkesp could not be located in the dynamic link
library MSVCRT.dll
<P>
There are two ways to ensure that you have the correct version of the
MSVCRT.dll file.<BR>
<P>
<OL>
<LI>Install the latest Netscape Communicator browser, which will update the
MSVCRT.dll file to the
correct version.
<P>
<LI>Copy the MSVCRT.dll
file from a system that has the latest Communicator browser to the iCS
system.
</OL>
<P>
The calendar server should now start up.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
Not an error message I recognise personally but the error has the same pattern as those discussed in the first and third boxes, suggesting that you've got an outdated .dll file that needs replacing. You should find AVFoundationCF.dll in the Apple Application Support folder. Delete it and then repair Apple Application Support. If that doesn't work go for the full tear down and rebuild.
tt2 -
MSVCRT.DLL problem - missing DLL error
I am interested if anyone else has run across the problem of
post-installation error message referencing a missing MSVCRT.DLL
dynamic link library even though several versions show up on the
C: drive in various folders such as WIN32/SYSTEM? Also, the
Dev6 Patch 1 makes reference to a missing web cartridge product
that I thought would be part of the Developer Server side, not
the client. I used the latest CDROM for the client NT 4.0 Sp 4
Workstation installation. Any thoughts? Thanks in advance, GL
nullGo to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
NT error: service "Oracle7" in DLL "operfdll.dll" failed
We are running JavaWebServer 1.1.3 on an NT 4.0, SP 3 machine.
There are a number of Java servlets running that access an Oracle
7.3 database on another NT 4.0 machine via the Oracle JDBC driver
and sql*net.
We get the following sequence of errors in the event log,
followed by a Dr. Watson error of an access violation in
the jrew.exe (jws runtime). At this point the web server is
pretty much dead as far as trying to run any servlet.
It's strange because the last error references an Oracle service
and the operfdll.dll, which isn't even on any of the machines
involved. Does anyone have any ideas on this? I saw a thread
on another forum where someone was having the same problem,
but they were using NeXT WebObjects.
The event messages:
1) The description for Event ID ( 0 ) in Source (
\WindowServer.exe ) could
not be found. It contains the following insertion string(s):
warning: can't connect
to the nmserver; is it running?.
Source WindowsServer.exe
2) The description for Event ID ( 0 ) in Source ( \pbs.exe )
could not be
found. It contains the following insertion string(s): warning:
can't connect to
the nmserver; is it running?.
Source \pbs.exe
3) The Open Procedure for service "Oracle7" in DLL "operfdll.dll"
failed.
Performance data for this service will not be available. Status
code returned
is DWORD 0.
Source: Perflib
nullHotfix loaded but didn't help.
Found a few articles referring to rebuilding the perf counter library. I ran "lodctr /R" failed first time then worked the second time. I believe the errors:
The Open Procedure for service "WDSTFTP" in DLL "C:\Windows\system32\wdstftp.dll" failed
The Open Procedure for service "WDSServer" in DLL "C:\Windows\system32\wdssrv.dll" failed
The Open Procedure for service "WDSMC" in DLL "C:\Windows\system32\wdsmc.dll" failed
Are gone but PXE boot still fails.
Do you think I might have to uninstall WDS and reinstall? "Using SCCM console to just remove PXE"
tconners -
I'm trying to install itunes version 7. I keep getting this message.
error 1905.module c:\program\files\quicktime\QTOcontrol.dll failed to unregister HRESULT -2147220472. Contact your support personnel.
Anyone know how to fix this?I got this very same error - I clicked okay twice, which didn't do anything, and then the x button.
The program went on and ended up installing! It seems okay at this point.
Wierd huh? -
I have an HP Pavilion zv6000 laptop with which I have used iTunes for years. I downloaded iTunes version 11.1.4.62 and rcvd error msgs (Apple Mobile Device failed to start. Verify sufficient privileges to start system svc. Then a MSVCR80.dll not found.???
Hello Don,
Thank you for the details of the issue you are experiencing with iTunes. I suggest removing iTunes and all related components and reinstalling iTunes for the issue you described. The following article has steps to do this(it is important to remove all components in the order listed):
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
I recommend continuing with these articles if you continue to experience issues with iTunes:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.
Maybe you are looking for
-
Ram Upgrade Does it mater who makes the memory card?
I have a 2007 20" iMac wtih at 2.4 Ghz Intel Core 2 Duo with 1 GB 667 MHz DDR2 SDRAM I am going to upgrade from 1 GB Ram to at least 4 GB and maybe as much as 6 or 8 depending on pricing? Does it matter who manufactures the memory card? Thanks
-
DW MX 2004 を2台のパソコンで使用していたのですが.2台目を更新したので再インストールしようとしたところ.試用期間終了のメッセージが表示され.インストールできません.どうすればいいですかね?
-
PR Overall Release Strategy Problem
Hi Expert, I have set the following Characterisrtic Name: 1) ZPR_Release_Plant, Char : CEBAN-WERKS (Char format : 4) 2) ZPR_Release_DOC_Type , char : CEBAN-BSART (Char format : 4) 3) ZPR_Release_Pur_Grp, Char: CEBAN_EKGRP (Char format : 3) 4) ZPR_Rel
-
ActionListeners and ActionEvents
Alright guys I am building myself a GUI and am using ActionListeners and ActionEvents however I'm not exactly sure what these 2 things do. I know they are used for buttons seeing as all of my buttons implement them but what specifically do they do. H
-
IProcurement Requisition screens
Hi All, I have to throw an error message in the iProcurement Requisition "Edit lines" page based on some values in the requisition distributions assocaited to the line. I have extended the controller of the "Edit Lines" page and am trying to run thro