Error 701, not enough procedure cache (Urgent)

Hi All,
Is there a SQL that I can use to determine the SPID that is the root cause of a 701 (not enough procedure cache)?
Additional information:
This is happening in 2 servers; 15G memory with 2G procedure cache and 10G memory with 1.25G procedure cache.
Environment: Sun Solaris 10 running ASE 15.0.3 ESD#4
Monitoring has been enabled.
Sybase recommends either increasing the procedure cache or running dbcc proc_cache(free_unused) periodically.
I would rather identify the process causing it or the configuration setting in these 2 environment that is causing this to happen.
Thanks in advance.
Anil

Another thing you might try is the dbcc memusage command. It will display the 20 biggest things in procedure cache, so if a few extraordinarily large cached procedures are the cause of the 701s, this may identify what the objects are. It won't identify who first ran it, though, or even show if any spid is currently executing any of those 20 items.
Example:
1> set switch on 3604
2> go
Switch 3604 ('print_output_to_client') is turned on.
All supplied switches are successfully turned on.
1> dbcc memusage
2> go
Memory Usage:
                                   Meg.           2K Blks                Bytes
      Configured Memory:       156.2500             80000            163840000
Non Dynamic Structures:         5.3751              2753              5636252
     Dynamic Structures:       123.1582             63057            129140736
           Cache Memory:         9.0098              4613              9447424
      Proc Cache Memory:        17.5703              8996             18423808
          Unused Memory:         1.1191               573              1173504
Buffer Cache Memory, Top 8:
Cache           Buf Pool        DB Id   Partition Id    Index Id         Meg.
default data c                31515         8             0            0.0117
                      2K      31515         8             0            0.0117
default data c                    1         8             0            0.0039
                      2K          1         8             0            0.0039
default data c                    4         8             0            0.0039
                      2K          4         8             0            0.0039
default data c                    2         8             0            0.0020
                      2K          2         8             0            0.0020
default data c                    3         8             0            0.0020
                      2K          3         8             0            0.0020
default data c                    5         8             0            0.0020
                      2K          5         8             0            0.0020
default data c                   14         8             0            0.0020
                      2K         14         8             0            0.0020
default data c                31514         8             0            0.0020
                      2K      31514         8             0            0.0020
Procedure Cache, Top 20:
Database Id: 31514
Object Id: 121048436
Object Name: sp_downgrade_esd
Version: 1
Uid: 1
Type: stored procedure
Number of trees: 0
Size of trees: 0.000000 Mb, 0.000000 bytes, 0 pages
Bytes lost for alignment 0 (Percentage of total: 0.000000)
Number of plans: 1
Size of plans: 1.217173 Mb, 1276298.000000 bytes, 628 pages
Bytes lost for alignment 6488 (Percentage of total: 0.508345)
Database Id: 31514
Object Id: 905051229
Object Name: sp_do_poolconfig
Version: 1
Uid: 1
Type: stored procedure
Number of trees: 0
Size of trees: 0.000000 Mb, 0.000000 bytes, 0 pages
Bytes lost for alignment 0 (Percentage of total: 0.000000)
Number of plans: 1
Size of plans: 1.080750 Mb, 1133248.000000 bytes, 582 pages
Bytes lost for alignment 3674 (Percentage of total: 0.324201)
Database Id: 31515
Object Id: 1344004788
Object Name: sp_dbcc_run_faultreport
Version: 1
Uid: 1
Type: stored procedure
Number of trees: 1
Size of trees: 0.972553 Mb, 1019796.000000 bytes, 501 pages
Bytes lost for alignment 4609 (Percentage of total: 0.451953)
Number of plans: 0
Size of plans: 0.000000 Mb, 0.000000 bytes, 0 pages
Bytes lost for alignment 0 (Percentage of total: 0.000000)

Similar Messages

Win 7 Pro x64 Error 0x8007046a: Not enough server storage is available to process this command.

I installed Win 7 Pro x64 on a reasonably decent machine (Nvidia nForce 680i SLI, core 2 duo, 4 gig ram). It was a clean install on a freshly formatted partition. While copying a large bunch of files from another machine on the LAN, I get "Error 0x8007046a: Not enough server storage is available to process this command." It does give me the option to retry and continue, but the error inevitably pops up again later during the copy. Googling the error, I found a reference to it, suggesting I go to the registry and increase the IRPStackSize (but this article was not specific to Win 7). I tried increasing it as high as 32 hex. This reduces the frequency of the error, but does not eliminate it completely. Also, I now see a new error sometimes that says, "Too many files are currently in use. Quit one or more programs and then try again." That's odd, because I don't have anything else running. I haven't seen these errors when copying files to different partitions on the machine, so I assume it's something to do with network.

Hi,
To troubleshoot the issue, please try to do an In-Place Upgrade to repair the system.
1. Start the computer by using the current Operating System.
2. Insert the Windows 7 DVD in the computer's DVD drive.
3. Use one of the following procedures, as appropriate:
If Windows automatically detects the DVD, the Install now screen appears. Click Install now.
If Windows does not automatically detect the DVD, follow these steps:
a. Click the Start Button, type Drive:\setup.exe in the start search box and then click OK.
Note: Drive is the drive letter of the computer's DVD drive.
b. Click Install now.
4. When you reach the "Which type of installation do you want?" screen, click Upgrade to upgrade the current operating system to Windows 7.
Thanks,
Novak

Error Message: Not enough memory for operation.

Hi All,
I'm having problem when try to connect to Oracle DB, check my details as below :
Connector : Microsoft ODBC for Oracle
Database Expert : Using Stored Procedure to populate data to excel.
Server Used: DBCCSWST125.reportjobserver
Error Message: Not enough memory for operation
Problem occurred when I tried to use stored procedure in my rpt file.
Thanks.

You are using multiple versions and it's still not clear what is happening but the CR 2008 reports should not be published to BusinessObjects Enterprise XI R2. CR 2008 has functionality that XI R3 does not support.
Create reports in CR XI R2 for BOE R2.
Also, your version of Enterprise has not been patched. You should have a Support contract which will allow you to get into our Gated site and update BOE. Then it may work but check with your administrators first before patching BOE.
Thank you
Don

I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

I would guess that a TV series takes up a fair amount of storage capacity. It is just a standard message I think that may indicate that you are actually running low on storage space.
If you go to Settings>General>About how many GBs are specified as being available? If you are low on space maybe deleting some apps may help.

I keep getting error message "not enough space on startup disk" on my macbook 10.6, even though I've deleted and compressed many files. Could something else be the problem?

Somehow 1500 web pages were downloaded into my iphone app! That's when the trouble began Now, I keep gettig error message"not enough room on your start up disc. "So I deleted most of theml, but when I compress/delete files, it doesn't help. Now i'm unable to back up to a disc, because I get a similar message about lack of room.. I can't download apple updates or printer updates. My computer is almost unusable. When I took it to the Apple store they had no idea what was wrong.
I bought an external hard drive-Free Agent Go Flex which doesn't seen to function, and has no user interface and apparently little tech support. My cursor is all over the place. No one at Apple seems to be able to fix this computer. Any suggestions for my next move?
Thank you.

See Here for Troubleshooting
Free Disc Space
http://www.thexlab.com/faqs/freeingspace.html
See Here for Resolving Startup Issues
http://support.apple.com/kb/ts1417

I can not take pictures or back up my phone due to error message not enough storage.I have all of my data turned off and still can not back phone up.? I have deleted lot of pics and messages and still get message..

I can not take pictures or even back my phone up due to error message not enough storage I have went into manage storage and turned all my apps to off and I still get error. I also have deleted a ton of pictures and apps.

Hi there mistib,
You may find the information in the article below helpful.
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
-Griff W.

Visual C++ Runtime Error R6016 not enough space for thread data

I get these errors on startup of my Windows 8.1 (with all latest updates installed) after login.
1. It would be helpful if the error message actually identified the exe or dll causing the problem.
Program: C:\Progra...
Is not a very helpful clue to the source of the error and because of its brevity comes across as being contemptuous of the user.
Image > https://plus.google.com/photos/116576618429528389782/albums/6004901461676803857
2. From the active apps Desktop toolbar it appears that this problem may be associated with
Apple IE DAV
3. I suspect that the problem announced by this error might also be contributing to the the fact that my Chrome browser now appears to be overlaid with a pink matt variation on its entire colour scheme. I have reported the pink matt error directly to Google
Chrome support.
Thanks
Martin

Hi,
Have you noticed any event in local event viewer related to this error?
Error reference:
C Run-Time Error R6016
http://social.technet.microsoft.com/Forums/en-US/13aa9b30-e00a-4ddc-9763-93702084bbea/visual-c-runtime-error-r6016-not-enough-space-for-thread-data?fo
Also, I suggest you to test the issue in clean boot mode to narrow down the issue.
How to perform a clean boot
http://support.microsoft.com/kb/929135
If the issue doesn’t appear in clean boot mod, you can determine which one can be the cause by using dichotomy in MSconfig. Checking on half of Non-Microsoft service and restart, determining which half of the services cause the issue and repeating to check
half of the problematic half services.
Otherwise, please test the issue in Safe mode and let me know the results, then provide the screenshot of the error.
Kate Li
TechNet Community Support

Cannot submit datapipe for urb 0, error -28: not enough bandwidth

cannot submit datapipe for urb 0, error -28: not enough bandwidth
What is causing this?
I read something about disabling the following:
:[ ] Enforce USB bandwidth allocation (EXPERIMENTAL)
:[ ] Dynamic USB minor allocation (EXPERIMENTAL)
But I feel that recompiling the kernel and changing in there is a bit out of my league but if it's the only solution there is I guess I have no choice.
Anyways, I was hoping someone here maybe has seen this issue and know how to solve it.

I don't think so. I remember for certain patchsets on Solaris (Sparc), to be able to apply the patchset - I had to download an interim patch to update the OUI version. It was necessary to apply that particular patchset. And I got that from Metalink, it was documented in the patchset help file. I guess, you should try the Metalink. The OUI version 10.1.0.4 I was referring to actually comes with iAS 10g R2. For the database version, 10g R2 - OUI version is 10.2.
Message was edited by:
zaferaktan

HT4859 I have the error message "Not enough storage. Cannot backup, not enough backup space in ICloud . . . ", but now the "close" and "settings" buttons don't respond and I cant get the IPad to open so I can go change settings. What do I do?

I have the error message "Not enough storage. Cannot backup, not enough backup space in ICloud . . . ", but now the "close" and "settings" buttons don't respond and I cant get the IPad to open so I can go change settings. What do I do?

For a "hard" restart of your iPad just press the home and power button at the same time and hold it for at least 10-15 sec. until it restarts.

ORA-27102: out of memory SVR4 Error: 12: Not enough space

We got image copy of one of production server that runs on Solaris 9 and our SA guys restored and handed over to us (DBAs). There is only one database running on source server. I have to up the database on the new server. while startup the database I'm getting following error.
====================================================================
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Aug 6 16:36:14 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-27102: out of memory
SVR4 Error: 12: Not enough space
SQL>
====================================================================
ABOUT THE SERVER AND DATABASE
Server:
uname -a
SunOS ush** 5.9 Generic_Virtual sun4u sparc SUNW,T5240*
Database: Oracle 10.2.0.1.0
I'm giving the "top" command output below:
Before attempt to start the database:
load averages: 2.85, 9.39, 5.50 16:35:46
31 processes: 30 sleeping, 1 on cpu
CPU states: 98.9% idle, 0.7% user, 0.4% kernel, 0.0% iowait, 0.0% swap
Memory: 52G real, 239G free, 49M swap in use, 16G swap free
the moment I run the "startup" command
load averages: 1.54, 7.88, 5.20 16:36:44
33 processes: 31 sleeping, 2 on cpu
CPU states: 98.8% idle, 0.0% user, 1.2% kernel, 0.0% iowait, 0.0% swap
Memory: 52G real, 224G free, 15G swap in use, 771M swap free
and I compared the Semaphores and Kernel Parameters in /etc/system . Both are Identical.
and ulimit -a gives as below..
root@ush**> ulimit -a*
time(seconds) unlimited
file(blocks) unlimited
data(kbytes) unlimited
stack(kbytes) 8192
coredump(blocks) unlimited
nofiles(descriptors) 256
memory(kbytes) unlimited
root@ush**>*
and ipcs shows nothing as below:
root@ush**> ipcs*
IPC status from <running system> as of Fri Aug 6 19:45:06 PDT 2010
T ID KEY MODE OWNER GROUP
Message Queues:
Shared Memory:
Semaphores:
Finally Alert Log gives nothing, but "instance starting"...
Please let us know where else I should check for route cause ... Thank You.

and I compared the Semaphores and Kernel Parameters in /etc/system . Both are Identical.are identical initSID,ora or spfile being used to start the DB.
Clues indicate Oracle is requesting more shared memory than OS can provide.
Do any additional clues exist within alert_SID.log file?

Report error. Not enough memory to continue processing.

Good day.
I'm running a report script and after a few minutes, an error message pops up saying "Report error. Not enough memory to continue processing." May i know how to fix this?
The error code is 1001200
Thank in advance.

In the database settings try changing the buffer size and sort buffer size. remember to stop restart the server to ahve them take affect

Error Message:Not enough balance in bond/UT1

Dear Expert,
I am creating ARE1 document excise under Running bond through tr cd J1IA101 in development client but at the time of posting ARE1 document system is giving error message" Not enough balance in bond/UT1: 0000010019 / 2010" Message no. 4F227 (error)
and "Reservation amount is greater than the balance in the bond!"(warning)
I checked the balance in bond it is really less but my client some times creating ARE1 document with negative bond balance because of delay in proof of export document for previous ARE1 documents and now we are implemening the ARE1 generation through sap.
i want to know is it possible to change this error message to warning message or is their any other way to allow the system to generate ARE1 document with nagative bond balance.
thanks in advance
warm regards
ravi

HI
this is to inform you that
LSEUAF04                          1207         MESSAGE I200 WITH FINDOBJECT MESSAGESTRING SCOPEOBJECT
                                                                     RAISING NOT_FOUND.
                                  1258       MESSAGE I200 WITH FINDOBJECT MESSAGESTRING SCOPEOBJECT
                                                                   RAISING NOT_FOUND.
                                  1273         MESSAGE I200 WITH FINDOBJECT MESSAGESTRING SCOPEOBJECT
                                                       SCOPE_OBJ RAISING NOT_FOUND.
the error which you are showing in the thread is dynamicall called from other program through the variables.
convert this error message to warning message
hope this clears your issue.
balajia

Error Message "Not Enough Memory to Open Illustrator"

Hi,
Im running adobe illustrator cs5 on windows 7 and have previously had no problems. Today however when I opened a pdf I got the error message "Not enough memory to open illustrator" I have searched and cannot find a reason for this error. It now happens nearly every time I open a pdf. I increased my windows 7 virtual memory, however, this does not seem to have any effect. Any assistance would be appreciated.

Something is blocking PDF handling (a security tool) on the system level and/or one of the shared Adobe components for PDF handling has been updated/ changed, most likely. Do the PDFs properly open in Acrobat/ Adobe Reader? Investigate these things. Also of course simply trash your AI prefs to make sure you are not a victim of tainted config data...
Mylenium

Need help, I have an error message "not enough storage" for icloud and it will not let me do anything

Need help... getting an error message "not enough storage" for icloud and it will not let me get passed the message

See if this helps.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

AEGP Plugin MediaIO Plugin:MediaIO2 error:0x4 not enough memory to complete this encoding (5027::12)

I am working on a video project in After Effects CS4 (with Trapcode Particular preset) that's 2:12 minutes long on a Windows 7 operating
system. I'm finished editing for the most part, but everytime I put the video in Render Queue it renders the video for a few seconds (sometimes minutes) and then stops with this message appearing: "After Effects logged one error: AEGP Plugin Media IO Plugin: MediaIO2 error: 0x4 not enough memory to complete this encoding (5027::12)". After I closed this message I checked the part of the video that did render was where I saved it to be as a normal file on my Desktop. I made this video with 2 compositions: 1 for the actual importing and editing and the 2nd for the rendering and thinning it out (this is because when I import the footage from my camera it's always very wide in after effects) There is nothing particularly abnormal about the video, not very heavy or anything and most of it isn't animated, just film. The size of the source material for the video is about 4.0 to 8.7MB.
Computer's Processor: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz
Computer's RAM: 2.00

First of all, CS4 does not work well with non-production codecs like MP4. Use the Adobe Media Encoder (or something similar) to convert your footage to a production codec (Cineform, DNxHD, Quicktime with the Photo JPEG codec or Quicktime with the PNG codec).
Second, you're running AE on a system with only 2 GB of RAM? Good heavens, man - no wonder it ran out of memory! Upgrade that to 4 if at all possible. (Upgrade to much more than that if you have a 64-bit OS and plan to upgrade AE ever. Although, on a machine as old and slow as that, you might be better off getting a new machine if you want to do anything serious in AE.)
Third, what's your exact version number of AE? You should be on 9.0.2 if I recall correctly.
Fourth, your video shouldn't be looking weird in AE. It's probably misinterpreting the pixel aspect ratio of your footage. Fix the interpretation and you shouldn't have to have a separate comp for changing its size.

Error 701, not enough procedure cache (*Urgent*)

Similar Messages

Maybe you are looking for

Error 701, not enough procedure cache (Urgent)