Error 820D - Invalid database - truncated to 0 bytes
Hi Forum.
I'm importing Mail into an account and every time I ran into the following error when the ofuser DB file size hit the 2gb.
POA Log:
10:05:37 F403 The database function 44 reported error [820D] on userq4f.db
10:05:37 F403 Error: File size is too large [820D] User:$USER ($USER)
GWcheck log:
STRUCTURAL VERIFICATION of database /media/nss/$DIR/ofuser/userq4f.db
Error 42- Invalid database - truncated to 0 bytes
Suggestion- No direct recovery possible. Attempt to recover file from external backup.
If no backup exists, request explicit structural rebuild from Admin and the
database will be replaced by valid empty database, to allow re-create.
However, all data previously contained in the database will be lost!
It seems to me that there is a limitation somewhere but I don't get exact information where?
I found nothing about the 820D in the error code documentation...
Someone experienced this ever? Can someone explain that?
Thanks in advance,
Pascal
Hi Laura,
done with the options:
<?xml version="1.0" encoding="UTF-8"?>
<GWCheck database-path="L:\XX_PO">
<database-type>
<post-office>
<post-office-name>
XX_PO
</post-office-name>
<object-type>
<user-resource>
<name>
userq4f.db
</name>
</user-resource>
</object-type>
</post-office>
</database-type>
<action name="analyze-fix-database">
<contents/>
<fix-problems/>
</action>
<process-option>
<databases>
<user/>
<message/>
</databases>
<logging>
<file>
gwchk32.log
</file>
</logging>
<results>
<send-to>
<admin/>
</send-to>
</results>
<misc>
<support-option>
SUBJECTLIST
</support-option>
</misc>
</process-option>
</GWCheck>
But there is nothing in the folder from where I gwcheck.exe started.... Any other suggestions?
Thanks,
Pascal
Similar Messages
-
Database error text: invalid number
Hi Gurus,
I am calling a procedure proxy from ECC and it is giving me a short dump:
Error 339 has occurred while executing database procedure
""_SYS_BIC"."Krishna_Demo_Proj.Model/KC_GET_MARA"" on the
current database connection "R/3".
Database error text: invalid number: ''
Triggering statement: "dsql_open_proc"
I have created a table with only one field.
Mapped the Data types after creating the Procedure Proxy
Which data type I need to use? I tried with lots of combinations but, still the same error.
Regards,
Krishna ChauhanHi Srinu,
I have used NVARCHAR 18 and corresponding to that CHAR18 is used.
Please see the attached screen shots.
Regards,
Krishna Chauhan -
[solved] error: core.db appears to be truncated: 1249/0 bytes
Hi arch'ers,
i run arch linux on my laptop for some time now and are very satisfied.
And now try to install it on my desktop pc on a dedicated harddisk.
After booting x86_64 live-cd (newest), partitioning, create filesystems + mounting for every mirror|url from the /etc/pacman.d/mirrorlist i get this:
example
"debug: url: http://mirror.de.leaseweb.net/archlinux … 64/core.db "
"debug: maxsize: 26214400"
"debug: opend tempfile for download: /var/lib/pacman/sync/core.db.part (wb)"
"downloading core.db..."
"debug: curl returned error 0 from transfer"
"debug: response code 200"
"error: core.db appears to be truncated: 1249/0 bytes"
i don't have any files under /var/lib/pacman/sync and it's writeable.
i don't think it's related with https://bugs.archlinux.org/task/23803 because it's the same for all urls in the mirrorlist.
Network is up and running
any hints?
Last edited by torstello (2012-09-20 15:04:49)It had something to do with our network / internet access here. I had to register first.
After that, all downloads worked.
sorry for bothering you -
String or binary Data would be truncated. Error detected by database DLL
Having problems generating two reports in Crystal Reports v8.5. I can run it on my machine and one on one of my Terminal Server(TermA). However when I tried to generate the same two reports on my second terminal server(TermB), it crashed and I get the following error messages: ODBC error: String or binary data would be truncated and Error detected by database DLL We have one set user ID and password to generate all of our Crystal Reports.
Steps taken:
Reinstall Crystal on TermB server and did a fresh installation of Crystal 8.5 on another workstation. Ran the reports and the result were the same (unable to generate the report) same errors messages.
Please HELP...
Thanks.Terminal Server was not supported in CR 8.5
-
/etc/netscape.mail.conf getting truncated to 0 bytes
After saving configuration changes in Messaging Server, the error
"LoadEnvironment failed" occurs, and the file /etc/netscape.mail.conf
is truncated to 0 bytes.
<P>
This error occurs when the partition containing /var has run out of
space.
<P>
Despite the fact that the postoffice and mailbox directories can be
installed elsewhere, the server still requires free space in the /var
filesystem to cache changes to the configuration file. A minimum of
10MB should be left
available in that partition.Hi Laura,
done with the options:
<?xml version="1.0" encoding="UTF-8"?>
<GWCheck database-path="L:\XX_PO">
<database-type>
<post-office>
<post-office-name>
XX_PO
</post-office-name>
<object-type>
<user-resource>
<name>
userq4f.db
</name>
</user-resource>
</object-type>
</post-office>
</database-type>
<action name="analyze-fix-database">
<contents/>
<fix-problems/>
</action>
<process-option>
<databases>
<user/>
<message/>
</databases>
<logging>
<file>
gwchk32.log
</file>
</logging>
<results>
<send-to>
<admin/>
</send-to>
</results>
<misc>
<support-option>
SUBJECTLIST
</support-option>
</misc>
</process-option>
</GWCheck>
But there is nothing in the folder from where I gwcheck.exe started.... Any other suggestions?
Thanks,
Pascal -
Trying to Install RMS application 13.2.2 and I get past the pre-installation checks and when I get to the Data Source details and enter the data source details with the check box checked to validate the schema/Test Data Source I get the following error:
Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver. Please check that the library path is set up properly or switch to the JDBC thin client oracle/jdbc/driver/T2CConnection.getLibraryVersioNumber()
Checks performed:
RMS Application code location and directory contents:
[oracle@test-rms-app application]$ pwd
/binary_files/STAGING_DIR/rms/application
[oracle@test-rms-app application]$ ls -ltr
total 144
-rw-r--r-- 1 oracle oinstall 272 Dec 7 2010 version.properties
-rw-r--r-- 1 oracle oinstall 405 Jan 16 2011 expected-object-counts.properties
-rw-r--r-- 1 oracle oinstall 892 May 13 2011 ant.install.properties.sample
-rw-r--r-- 1 oracle oinstall 64004 Jun 6 2011 build.xml
drwxr-xr-x 9 oracle oinstall 4096 Jun 16 2011 rms13
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 installer-resources
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 antinstall
drwxr-xr-x 2 oracle oinstall 4096 Jun 16 2011 ant-ext
drwxr-xr-x 5 oracle oinstall 4096 Jun 16 2011 ant
-rw-r--r-- 1 oracle oinstall 11324 Dec 18 09:18 antinstall-config.xml.ORIG
-rwxr-xr-x 1 oracle oinstall 4249 Dec 18 10:01 install.sh
drwxr-xr-x 4 oracle oinstall 4096 Dec 18 10:06 common
-rw-r--r-- 1 oracle oinstall 16244 Dec 19 10:37 antinstall-config.xml
-rw-r--r-- 1 oracle oinstall 689 Dec 19 10:37 ant.install.log
[oracle@test-rms-app application]$
Application installation:
[oracle@test-rms-app application]$ ./install.sh
THIS IS the driver directory
Verified $ORACLE_SID.
Verified SQL*Plus exists.
Verified write permissions.
Verified formsweb.cfg read permissions.
Verified Registry.dat read permissions.
Verified Java version 1.4.2.x or greater. Java version - 1.6.0
Verified Tk2Motif.rgb settings.
Verified frmcmp_batch.sh status.
WARNING: Oracle Enterprise Linux not detected. Some components may not install properly.
Verified $DISPLAY - 172.16.129.82:0.0.
This installer will ask for your "My Oracle Support" credentials.
Preparing installer. This may take a few moments.
Your internet connection type is: NONE
Integrating My Oracle Support into the product installer workflow...
[move] Moving 1 file to /binary_files/STAGING_DIR/rms/application
Installer preparation complete.
MW_HOME=/u01/app/oracle/Middleware/NewMiddleware1034
ORACLE_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/as_1
ORACLE_INSTANCE=/u01/app/oracle/Middleware/NewMiddleware1034/asinst_1
DOMAIN_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/user_projects/domains/rmsClassDomain
WLS_INSTANCE=WLS_FORMS
ORACLE_SID=rmsdbtst
JAVA_HOME=/u01/app/oracle/jrockit-jdk1.6.0_45-R28.2.7-4.1.0
Launching installer...
To make sure I have connectivity from the app server to the database (on a database server) here are the steps followed:
[oracle@test-rms-app application]$ tnsping rmsdbtst
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 19-DEC-2013 10:41:40
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = test-rms-db.vonmaur.vmc)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SID = rmsdbtst)))
OK (0 msec)
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ sqlplus rms13@rmsdbtst
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Dec 19 10:46:18 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ ping test-rms-db
PING test-rms-db.vonmaur.vmc (192.168.1.140) 56(84) bytes of data.
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=1 ttl=64 time=0.599 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=2 ttl=64 time=0.168 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=3 ttl=64 time=0.132 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=4 ttl=64 time=0.158 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=5 ttl=64 time=0.135 ms
--- test-rms-db.vonmaur.vmc ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4001ms
rtt min/avg/max/mdev = 0.132/0.238/0.599/0.181 ms
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ uname -a
Linux test-rms-app.vonmaur.vmc 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ cat /etc/*-release
Enterprise Linux Enterprise Linux Server release 5.3 (Carthage)
Red Hat Enterprise Linux Server release 5.3 (Tikanga)
[oracle@test-rms-app application]$
The database is created and all the batch file scripts have been successfully deployed. Now working on the application server. The Weblogic server is installed and 11g forms and reports are installed successfully.
Any help would be helpful.
Thanks,
Ram.Please check MOS Notes:
FAQ: RWMS 13.2 Installation and Configuration (Doc ID 1307639.1) -
Error while creating database in classic appln
Hi All,
I am getting this error while creating database in classic application.
com.hyperion.planning.olap.EssbaseException: Failed to create database, error code [%s] (1013221).
Can anyone please let me know why I am getting it?
Thanks in advanceCan you check for a more specific error code in the Application log? There can be various reasons for this:
1. For data storage and binary installation, Essbase supports the use of any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS). A disk array mounted using NFS or CIFS is not supported.Use any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS).
2. Error occurs when deploy Planning application with double byte enabled. When the plan name is changed to English, deploy will be successful. This issue can be fixed by setting Correct Essbase ESSLANG system value.
3. The Essbase User that creates the application and DB folders has default ACL rw-rw-rw which does not allow the essbase app to create files inside the folder.
HTH-
Jasmine. -
Control file failed error while duplicating database using RMAN
I am using oracle database 10g R2 and trying to make a clone of the source database orcl on the same machine but with different directory structure with the name of test.
When i run the duplicate command to create test database, then following error is generted:
D:\>rman target sys@orcl nocatalog auxiliary /
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Nov 11 12:13:26 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
target database Password:
connected to target database: ORCL (DBID=1264668332)
using target database control file instead of recovery catalog
connected to auxiliary database: TEST (not mounted)
RMAN> @script.txt
RMAN> Run {
2> Allocate channel C1 type disk;
3> allocate auxiliary channel 'adisk_0' type DISK;
4> duplicate target database to "test";
5> #BACKUP INCREMENTAL LEVEL 1 DATABASE;
6> #BACKUP INCREMENTAL LEVEL 1 CUMULATIVE DATABASE;
7> #BACKUP INCREMENTAL LEVEL 0 DATABASE;
8> #delete obsolete;
9> }
allocated channel: C1
channel C1: sid=140 devtype=DISK
allocated channel: adisk_0
channel adisk_0: sid=157 devtype=DISK
Starting Duplicate Db at 11-NOV-11
contents of Memory Script:
set until scn 12926250;
set newname for datafile 1 to
"D:\TEST\ORADATA\SYSTEM01.DBF";
set newname for datafile 2 to
"D:\TEST\ORADATA\UNDOTBS01.DBF";
set newname for datafile 3 to
"D:\TEST\ORADATA\SYSAUX01.DBF";
set newname for datafile 4 to
"D:\TEST\ORADATA\USERS01.DBF";
set newname for datafile 5 to
"D:\TEST\ORADATA\EXAMPLE01.DBF";
set newname for datafile 6 to
"D:\TEST\ORADATA\GL.DBF";
restore
check readonly
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 11-NOV-11
channel adisk_0: starting datafile backupset restore
channel adisk_0: specifying datafile(s) to restore from backup set
restoring datafile 00001 to D:\TEST\ORADATA\SYSTEM01.DBF
restoring datafile 00002 to D:\TEST\ORADATA\UNDOTBS01.DBF
restoring datafile 00003 to D:\TEST\ORADATA\SYSAUX01.DBF
restoring datafile 00004 to D:\TEST\ORADATA\USERS01.DBF
restoring datafile 00005 to D:\TEST\ORADATA\EXAMPLE01.DBF
restoring datafile 00006 to D:\TEST\ORADATA\GL.DBF
channel adisk_0: reading from backup piece D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_07\O1_MF_NNND0_TAG20111107T220822_7CJ
P
channel adisk_0: restored backup piece 1
piece handle=D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_07\O1_MF_NNND0_TAG20111107T220822_7CJ44MH4_.BKP tag=TAG20111107T220
channel adisk_0: restore complete, elapsed time: 00:01:46
Finished restore at 11-NOV-11
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "TEST" RESETLOGS ARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 292
LOGFILE
GROUP 1 ( 'D:\TEST\ORADATA\REDO01.LOG' ) SIZE 50 M REUSE,
GROUP 2 ( 'D:\TEST\ORADATA\REDO02.LOG' ) SIZE 50 M REUSE,
GROUP 3 ( 'D:\TEST\ORADATA\REDO03.LOG' ) SIZE 50 M REUSE
DATAFILE
'D:\TEST\ORADATA\SYSTEM01.DBF'
CHARACTER SET WE8MSWIN1252
contents of Memory Script:
switch clone datafile all;
executing Memory Script
datafile 2 switched to datafile copy
input datafile copy recid=1 stamp=766930525 filename=D:\TEST\ORADATA\UNDOTBS01.DBF
datafile 3 switched to datafile copy
input datafile copy recid=2 stamp=766930525 filename=D:\TEST\ORADATA\SYSAUX01.DBF
datafile 4 switched to datafile copy
input datafile copy recid=3 stamp=766930526 filename=D:\TEST\ORADATA\USERS01.DBF
datafile 5 switched to datafile copy
input datafile copy recid=4 stamp=766930526 filename=D:\TEST\ORADATA\EXAMPLE01.DBF
datafile 6 switched to datafile copy
input datafile copy recid=5 stamp=766930526 filename=D:\TEST\ORADATA\GL.DBF
contents of Memory Script:
set until scn 12926250;
recover
clone database
delete archivelog
executing Memory Script
executing command: SET until clause
Starting recover at 11-NOV-11
channel adisk_0: starting incremental datafile backupset restore
channel adisk_0: specifying datafile(s) to restore from backup set
destination for restore of datafile 00001: D:\TEST\ORADATA\SYSTEM01.DBF
destination for restore of datafile 00002: D:\TEST\ORADATA\UNDOTBS01.DBF
destination for restore of datafile 00003: D:\TEST\ORADATA\SYSAUX01.DBF
destination for restore of datafile 00004: D:\TEST\ORADATA\USERS01.DBF
destination for restore of datafile 00005: D:\TEST\ORADATA\EXAMPLE01.DBF
destination for restore of datafile 00006: D:\TEST\ORADATA\GL.DBF
channel adisk_0: reading from backup piece D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_09\O1_MF_NNND1_TAG20111109T223628_7CO
P
channel adisk_0: restored backup piece 1
piece handle=D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_09\O1_MF_NNND1_TAG20111109T223628_7COGJZVT_.BKP tag=TAG20111109T223
channel adisk_0: restore complete, elapsed time: 00:00:07
channel adisk_0: starting incremental datafile backupset restore
channel adisk_0: specifying datafile(s) to restore from backup set
destination for restore of datafile 00001: D:\TEST\ORADATA\SYSTEM01.DBF
destination for restore of datafile 00002: D:\TEST\ORADATA\UNDOTBS01.DBF
destination for restore of datafile 00003: D:\TEST\ORADATA\SYSAUX01.DBF
destination for restore of datafile 00004: D:\TEST\ORADATA\USERS01.DBF
destination for restore of datafile 00005: D:\TEST\ORADATA\EXAMPLE01.DBF
destination for restore of datafile 00006: D:\TEST\ORADATA\GL.DBF
channel adisk_0: reading from backup piece D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_10\O1_MF_NNND1_TAG20111110T221428_7CR
P
channel adisk_0: restored backup piece 1
piece handle=D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_10\O1_MF_NNND1_TAG20111110T221428_7CR1MQFO_.BKP tag=TAG20111110T221
channel adisk_0: restore complete, elapsed time: 00:00:16
starting media recovery
archive log thread 1 sequence 524 is already on disk as file D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_11_11\O1_MF_1_524_7CS
C
archive log filename=D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_11_11\O1_MF_1_524_7CSG2HVT_.ARC thread=1 sequence=524
media recovery complete, elapsed time: 00:00:14
Finished recover at 11-NOV-11
contents of Memory Script:
shutdown clone;
startup clone nomount ;
executing Memory Script
database dismounted
Oracle instance shut down
connected to auxiliary database (not started)
Oracle instance started
Total System Global Area 230686720 bytes
Fixed Size 1248236 bytes
Variable Size 67109908 bytes
Database Buffers 155189248 bytes
Redo Buffers 7139328 bytes
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "TEST" RESETLOGS ARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 292
LOGFILE
GROUP 1 ( 'D:\TEST\ORADATA\REDO01.LOG' ) SIZE 50 M REUSE,
GROUP 2 ( 'D:\TEST\ORADATA\REDO02.LOG' ) SIZE 50 M REUSE,
GROUP 3 ( 'D:\TEST\ORADATA\REDO03.LOG' ) SIZE 50 M REUSE
DATAFILE
'D:\TEST\ORADATA\SYSTEM01.DBF'
CHARACTER SET WE8MSWIN1252
released channel: C1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 11/11/2011 12:16:21
RMAN-06136: ORACLE error from auxiliary database: ORA-01503: CREATE CONTROLFILE failed
ORA-01504: database name 'TEST' does not match parameter db_name 'orcl'
RMAN> **end-of-file**
Script.txt
Run {
Allocate channel C1 type disk;
allocate auxiliary channel 'adisk_0' type DISK;
duplicate target database to "test";
}Kindly help?Moazzam wrote:
RMAN-06136: ORACLE error from auxiliary database: ORA-01503: CREATE CONTROLFILE failed
ORA-01504: database name 'TEST' does not match parameter db_name 'orcl'
Kindly help?>Please check what is the value of parameter db_name in the standby database? It should be match with TEST name
Cheers -
Been watching Netflix on my Verizon HP Notebook, it's less than 3mo old. runs windows xp...pretty standard stuff. Anyway tried to login to netflix and Firefox gave this error message--Invalid URL
The requested URL "/home", is invalid. Reference #9.9d0bc841.1320231048.92bcc44 -- I called Netflix & there system running perfectly. My pc running perfectly as well. Logged into netflix using IE--worked just fine. So by process of elimination, it's Firefox's Problem! I have NO CLUE about it, never seen it before on ANY browser. Tried opening & closing FFx, restarting puter, etc...Don't know what else to tell you except Firefox works on every other website now EXCEPT NETFLIX, it's the darnedest (I know that's not a word LOL) I've seen--it happened 10/2/11 @ about 3am!As I understand:
The procedure works.
The link 'appears' to work. (ie you saw the procedure run a 2nd at the database level)
But it doesn't actually work (because you get a 404)
I think I ran into an issue, on a completely different page type, that produced an 'error 404'. (I can't seem to reproduce it, though)
The only way I discovered what was really going on was with an HTTP sniffer. (eg HTTPFox for FireFox)
Through that, I noticed that the browser was (for some reason) calling a completely non-sensible APEX page. (hence the PAGE NOT FOUND error)
My solution was to add a "submit to self" branch point.
If that doesn't work, I'm at a loss.
MK -
I am geting errors in my database alert log file ora-12012 and ora 44003
Hi all,
I am using oracle 10g ...10.2.0.1.0 and OS is solaris 10.......
i am geting these errors in my database alert log file last two days..i am not geting why it is coming?
ORA-12012: error on auto execute of job 8887
ORA-44003: invalid SQL name
and trace file is i got i am posting here please help any one is aware about this....
System name: SunOS
Node name: obrmzone1
Release: 5.10
Version: Generic_137111-06
Machine: sun4v
Instance name: ------
Redo thread mounted by this instance: 1
Oracle process number: 144
Unix process pid: 26874, image:--------- (J000)
*** ACTION NAME:(AUTO_SPACE_ADVISOR_JOB) 2011-06-10 22:00:49.372
*** MODULE NAME:(DBMS_SCHEDULER) 2011-06-10 22:00:49.372
*** SERVICE NAME:(SYS$USERS) 2011-06-10 22:00:49.372
*** SESSION ID:(110.7114) 2011-06-10 22:00:49.372
*** 2011-06-10 22:00:49.372
ORA-12012: error on auto execute of job 8887
ORA-44003: invalid SQL name
thank you in advance,
DavI just google with "ORA-44003: invalid SQL name" and found below link:
http://www.oracle-base.com/articles/10g/dbms_assert_10gR2.php
SIMPLE_SQL_NAME
The SIMPLE_SQL_NAME function checks the input string conforms to the basic characteristics of a simple SQL name:
The first character of the name is alphabetic.
The name only contains alphanumeric characters or the "_", "$", "#"
Quoted names must be enclosed by double quotes and may contain any characters, including quotes provided they are represented by two quotes in a row ("").
The function ignores leading and trailing white spaces are ignored
The length of the input string is not validated. -
Internal error in the database interface (Oracle)
I have recently an Oracle runtime error just by entering the SAP system (SAP ECC 6.0).
DBIF_RSQL_INVALID_REQUEST
The current ABAP/4 program terminated due to
an internal error in the database interface.
Error analysis
An invalid request was made to the SAP database interface in a statement
in which the table "DOKTL " was accessed.
Trigger Location of Runtime Error
Program SAPLSDOC
Include LSDOCU09
Row 249
Module type (FUNCTION)
Module Name DOCU_GET
I appreciate any helpful information.
Thank you very much indeed
Thomhi Thom,
most error relating to table DOKTL are caused by misconfigured network card.
if this is a "home" system, install a loopback adapter from Microsoft and use IP address 127.0.0.1 and also check "hosts" file for inconsistency. do not use the IP adddress provided by your ISP as it may change. -
SP01: DI error -5002 Invalid Total ORDR.DocTotal
Hi All,
i'm getting a strange error.
i'm adding a sales order via DI.
when the code is executed via the .net debugger it works great.
when i create an installer and install the Addon i receive the error:
-5002 Invalid Total [ORDR.DocTotal]
do someone ever had this kind of error?
btw i'm using SAPB12005A SP1 PL2
thanks
Moty MoshinHere is the code:
oNewOrder = B1Connections.diCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders)
'B1Connections.diCompany.StartTransaction()
Dim LinesAdded As Integer = 0
For i = 1 To intDupAmount
Try
' this loop adds the different items to the Delivery object
oNewOrder.CardCode = strBPCode
oNewOrder.Series = strSeriesCode
oNewOrder.NumAtCard = strVendorRefNo
oNewOrder.Project = strProjectCode
oNewOrder.ShipToCode = strShipToCode
oNewOrder.DocDueDate = strDocDueDate
oNewOrder.Comments = strComments
oNewOrder.PaymentGroupCode = strPaymentTerms
oNewOrder.PaymentMethod = strPaymentMethod
'Currently not available thru the DI/UI
'oNewOrder.header = OQUTHeader
'oNewOrder.Footer = OQUTFooter
Catch ex As Exception
B1Connections.theAppl.MessageBox("In For Step 1")
End Try
Try
oNewOrder.Lines.SetCurrentLine(0)
'Line item fields that are visible on the sales order form
oNewOrder.Lines.ItemCode = currSalesFormLines.ItemCode 'As String '1 'ItemCode
oNewOrder.Lines.ItemDescription = currSalesFormLines.ItemDesc 'As String '1 'ItemDesc
oNewOrder.Lines.WarehouseCode = currSalesFormLines.WhsCode 'As String '24 'WhsCode
oNewOrder.Lines.UnitPrice = currSalesFormLines.UnitPrice 'As Double '14 'UnitPrc
oNewOrder.Lines.DiscountPercent = currSalesFormLines.DiscPct 'As Double '14 'DiscPct
oNewOrder.Lines.Price = currSalesFormLines.Price 'As Double '17 'Price
oNewOrder.Lines.Quantity = currSalesFormLines.Quantity 'As Double '11 'Quantity
'Line item fields that are not visible on the sales order form
oNewOrder.Lines.UserFields.Fields.Item("U_" + cUDinit.udfMdL_EstQty).Value = currSalesFormLines.EstQty 'As Double 'U_XX_EstQty
'oNewOrder.Lines.UserFields.Fields.Item("U_" + cUDinit.udfMdL_STCC).Value = currSalesFormLines.STCC.ToString 'As Double 'U_XX_STCC
'oNewOrder.Lines.UserFields.Fields.Item("U_" + cUDinit.udfMdL_HSC).Value = currSalesFormLines.HSC 'As String 'U_XX_HSC
'oNewOrder.Lines.UserFields.Fields.Item("U_" + cUDinit.udfMdL_CVal).Value = currSalesFormLines.CVal.ToString 'As Double 'U_XX_CVal
oNewOrder.Lines.TotalLc = currSalesFormLines.TotalLc 'As Double '21 'TotalLc
oNewOrder.Lines.Total()
oNewOrder.Lines.UserFields.Fields.Item("U_" + cUDinit.udfMdL_QtyMT).Value = currSalesFormLines.QtyMT 'As Double 'U_XX_QtyMT
oNewOrder.Lines.UserFields.Fields.Item("U_" + cUDinit.udfMdL_QtyST).Value = currSalesFormLines.QtyST 'As Double 'U_XX_QtyST
'oNewOrder.Lines.UserFields.Fields.Item("U_" + cUDinit.udfMdL_DGood).Value = currSalesFormLines.DGood.ToString 'As String 'U_XX_DGood
Catch ex As Exception
B1Connections.theAppl.MessageBox("In For Step 2 - Lines")
End Try
Try
'Header level UDF's
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_ConNum).Value = cLastUdfMD.ConNum
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_ConTyp).Value = cLastUdfMD.ConTyp
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_ConSta).Value = cLastUdfMD.ConSta
If cLastUdfMD.RefCon <> "" Then
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_RefCon).Value = cLastUdfMD.RefCon
End If
'Get Release number
'B1Connections.theAppl.MessageBox("Before Add Msg 2")
lngNextRelease = cReleaseNumber.GetNextNum(cUDinit.udoRn_ReleaseNumber, strSeries)
If lngNextRelease = -1 Then
B1Connections.diCompany.EndTransaction(BoWfTransOpt.wf_RollBack)
retVal = cReleaseNumber.UnLockNumbering(cUDinit.udoRn_ReleaseNumber, strSeries)
B1Connections.theAppl.MessageBox("Error - Cannot Get Next Number from NNM1")
Exit Sub
End If
releaseNumbers.Add(lngNextRelease)
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_RelNum).Value = lngNextRelease.ToString 'intRelNum
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_ShDtSt).Value = cLastUdfMD.ShDtSt
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_ShDtEn).Value = cLastUdfMD.ShDtEn
If cLastUdfMD.StrDt <> "" Then
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_StrDt).Value = cLastUdfMD.StrDt
End If
If cLastUdfMD.StrAmt <> "" Then
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_StrAmt).Value = cLastUdfMD.StrAmt
End If
If cLastUdfMD.AcrAmt <> "" Then
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_AcrAmt).Value = cLastUdfMD.AcrAmt
End If
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_CQTY).Value = cLastUdfMD.CQTY
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_LN).Value = cLastUdfMD.LN
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_STerms).Value = cLastUdfMD.STerms
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_Mode).Value = cLastUdfMD.Mode
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_Carrier).Value = cLastUdfMD.Carrier
If cLastUdfMD.PortEntry <> "" Then
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_PtEnt).Value = cLastUdfMD.PortEntry
End If
If cLastUdfMD.CBrok <> "" Then
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_CBrok).Value = cLastUdfMD.CBrok
End If
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_Fterm).Value = cLastUdfMD.FTerms
If cLastUdfMD.PriveEq <> "" Then
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_PrivEq).Value = cLastUdfMD.PriveEq
End If
If cLastUdfMD.Route <> "" Then
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_Route).Value = cLastUdfMD.Route
End If
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_TF).Value = cLastUdfMD.TF
'oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_Season).Value = cLastUdfMD.Season
'oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_STCity).Value = cLastUdfMD.STCity
'oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_STCtr).Value = cLastUdfMD.STCtr
'oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_STSt).Value = cLastUdfMD.STSt
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_TAmtIn).Value = cLastUdfMD.TAmtIn
oNewOrder.UserFields.Fields.Item("U_" + cUDinit.udfMdH_TAmtOr).Value = cLastUdfMD.TAmtOr
Catch ex As Exception
B1Connections.theAppl.MessageBox("In For Step 3 - Header Level UDF")
End Try
' add sales order current quntity () from total (U_XX_TQTYR)
' add sales order current dollar value() from total (U_XX_TAMTR)
' Try to add the sales order object to the database
'B1Connections.theAppl.MessageBox("Before Add Msg 3")
lRetCode = oNewOrder.Add()
'B1Connections.theAppl.MessageBox("Before Add Msg 3.1")
If lRetCode <> 0 Then ' If the addition failed
B1Connections.diCompany.GetLastError(lErrCode, sErrMsg)
B1Connections.theAppl.MessageBox("Error - " & lErrCode & sErrMsg)
' B1Connections.diCompany.EndTransaction(BoWfTransOpt.wf_RollBack)
Try
B1Connections.diCompany.EndTransaction(BoWfTransOpt.wf_RollBack)
Catch ex As Exception
B1Connections.theAppl.MessageBox("Error - Add Error:" & lRetCode & " - " & ex.Message)
End Try
retVal = cReleaseNumber.UnLockNumbering(cUDinit.udoRn_ReleaseNumber, strSeries)
'B1Connections.diCompany.GetLastError(lErrCode, sErrMsg)
'B1Connections.theAppl.MessageBox("Error - " & lErrCode & sErrMsg)
Exit Sub
Else
End If
LinesAdded = LinesAdded + 1
' init the order object
oNewOrder = B1Connections.diCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders)
Next i
'B1Connections.diCompany.EndTransaction(BoWfTransOpt.wf_Commit)
retVal = cReleaseNumber.UnLockNumbering(cUDinit.udoRn_ReleaseNumber, strSeries) -
Why the err Invalid database Connection -CR 11 version in Visual studio 1.1
Hai all,
I am new to using the Crystal report with Visual studio 2003.I am facing Invalid database connection problem. My objective is tyring to upgrade CR 8 to CR11 with VS 1.1 framework(VC++ in .NET 2003).All things like ODBC connection with MS SQL server 2005,generating report going fine with CR8 version but invalid database connection error comes with CR11 version. The configuration details and Code snippet are below for your ref,
Upgrading CR8 to CR11 with VS .NET 2003.
Application framework - VS 1.1 framework
CR - 11 Version
DB - MS SQL server 2005
Connection - ODBC
DLL - CRPE32 DLL (Version11)
Code snippet:
CODBCDatabase * pDatabase = pApp->GetDatabase();
BOOL bRes;
bRes = ::PELogOnSQLServerWithPrivateInfo(_T("pdsodbc.DLL"), pDatabase->m_hdbc);
Note: pdsodbc dll not found in local and anywhere.But it supports CR 8 but not CR 11.So i downloaded and put it in appropriate place exe path\system32\system and tested.Used and tested p2sodbc dll also but "Invalid DataBase connection" err came.Followed some instruction like changing the Data source name,DSN path,re installing CR 11 version and all but same problem coming.
::PELogOnSQLServerWithPrivateInfo() declation is in the following link
http://www.arcaretentores.com.br/FTP/Format/Report/ProgramF/SEAGAT~1/CRW/DEV/Help/HTML/12a_0708.htm
Thanks in advance
Regards
SatheeshKumar
India.Thanks for your reply
The API i have given is not available in Crystal report 11.So i tried with the PELogonServer API of version 11.It also failed.
I am unable to understand the suggestions you gave to me 1) The Report Designer Component (RDC)
2) The CR Assemblies for .NET.
Can you give any link that have related samples or articles to implement the above topics please?
Thanks again,
Satheesh Kumar.D -
Error # 3021 - Invalid Relation. --- MS Access to Oracle APEX
Hello everybody.
I have 3 years working with Oracle APEX and now I have the need to migrate an Access database to Oracle and APEX.
I have:
- MS Access 2003 database
- Oracle SQL Developer 3.0.04.34
- Oracle 10g Database
I will try to provide all the relevant information.
I used the Access Exporter for Access 2003 tool from Oracle SQL Developer to creat both .xml (for SQL Dev) file and .sql file (for APEX) but the process show me an error mesassge that said: "Error # 3021 - Invalid Relation. No current record".
I read in OTN forum that it was because the migration tool can not access the system tables and that I need to modify permisions to allow "Read Data". I did this process and I was able to create .xml file, however if I chose Application Express to create .sql file or the option to create both files the same error shows.
I have been reading in this forum but didn't find a way to solve it.
Does any body knows how to solve this issue?
Any help is appreciated.
Thanks in advance for your help.Hello,
I can't reproduce your issue.
Have you double-checked that the tables MSysAccessObjects, MSysACEs, MSysObjects, MSysQueries and MSysRelationships are visible and that the Admin user has at least Read Design and Read Data permission on those tables?
If that is the case, and the problem still happens, and you are able to give a copy of your .mdb file to Oracle, then I suggest to open a Service Request with Oracle Support so that the issue can be investigated.
Regards
Wolfgang -
ORA-27102: out of memory SVR4 Error: 22: Invalid argument
Hi all,
I'm doing an install of a Solaris 10.2, Oracle 10.2 system. During the Create Database phase, I am getting;
ORA-27102: out of memory SVR4 Error: 22: Invalid argument
Doing some research, and reading through the details here:
Link: [http://technopark02.blogspot.com/2006/09/solaris-10oracle-fixing-ora-27102-out.html]
I think my issue is my SHM parameters, reinforced by the repeated entry in the Oracle Alert log:
+WARNING: EINVAL creating segment of size 0x0000000085000000+*
+fix shm parameters in /etc/system or equivalent+*
when the create fails.
I am not familar with Solaris' new project mechanism, although from what I have read, it seems to be set up properly.
Here are my server details:
# prtconf | grep Mem
Memory size: 8192 Megabytes
# prctl -n project.max-shm-memory -i project 200
project: 200: QBI
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
project.max-shm-memory
privileged 10.0EB - deny -
system 16.0EB max deny -
And as for Oracle:
shared_pool_size = 1522029035
shared_pool_reserved_size = 152202903
pga_aggregate_target = 2705829396
sga_max_size = 3439329280
db_cache_size = 1159641169
During the course of troubleshooting, I have:
1 - Increased the amount of SHM allocated in the project. I have tried 16GB, 8 GB, 10 GB, 11GB etc, to no effect, so I reset it to 10GB (as seen above) and focused my efforts elsewhere.
2. SHARED_POOL_SIZE - I have decreased this by roughly 75% from the original value, again to no effect.
3. PGA and SGA sizes - I have increased these from the original values by an increment of 25%
Following the advice from the referenced blog (which does a good job of explaining the logic behind the actions) I have determined that the Alert log error message is telling me that it is lacking
2231369728
(Hex conversion value, which I think I need to read as 2GB, not 100% sure)
I've increased my project allocation, and the PGA sizes, did I just not do it enough?
Any advice?
Thanks for any input,
Troy ShaneHi,
check following sap note
Note 546006 - Problems with Oracle due to operating system errors
Note 743328 - Composite SAP note: ORA-27102
regards,
kaushal
Maybe you are looking for
-
Problem with Enable scalable feature of XSLT processor
Hi Gurus, I'm using BI Publisher 10.1.3.4.1. I've having a report, when running in a specific sequence (i.e. after running with XML dataset 1 then dataset 2), will yield an error. Here is the log I got in the xdo.log. [061411_110902953][][EXCEPTION]
-
No option to save files, save as files in inDesign 5.5
The option to save, save as and copy files are grayed out and not an option for me. I am having to save my files as IDML files and force quite inDesign to close it. I see that this has been a ongoing issue...but can't seem to find a real solution or
-
Safari not anstalling on 10.6.8
i updated snow leopard to 10.6.8 and i am trying to astall safari, but it does not allow me , saying it needs 10.6.7
-
Oracle 8i Database Configuration Assistant Install fails
the log says "Downloads\Oracle\Oracle is an invalid command line argument." Where can I correct this (path problem?)? There was no \Downloads directory at the time of install.... Thanks a lot. Greg
-
I had a trialversion of Adobe Indesign CC, and now I have a membership. But when I try to start the newly downloaded app from Creative Cloud, It still tells me the trialversion has experied. I have tried uninstalling and deleting the software, and Cr