ERROR: authenticateHTTPConnection: bad peer on RAC enviroment

Hi,
In my RAC enviroment which has two nodes, I installed the agent with cluster mode. The installation is successful and the two nodes has been added to GC. But only one node is correctly and send info to repository. For the other node, though it appears on GC, but it's status is metric collection error. When I access it, I got the following error in emoms.log:( I found that user553054 has met the same problem and post a thread named 'problem with agent on cluster'. But I want to know why the problem will occur? )
2007-01-22 16:03:02,546 [MetricCollector:HOMETAB_THREAD600:60] ERROR emSDK.comm authenticateHTTPConnection.1300 - authenticateHTTPConnection: bad peer cn=redhat01
2007-01-22 16:03:02,546 [MetricCollector:HOMETAB_THREAD600:60] ERROR rt.DbMetricCollectorTarget _getAllData.326 - oracle.sysman.emSDK.emd.comm.CommException: redhat02:cn=redhat01
oracle.sysman.emSDK.emd.comm.CommException: redhat02:cn=redhat01
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1541)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getMetrics(EMDClient.java:913)
     at oracle.sysman.emo.perf.metric.rt.DbHomeTab._getAllData(DbHomeTab.java:322)
     at oracle.sysman.emo.perf.metric.rt.DbHomeTab.getData(DbHomeTab.java:143)
     at oracle.sysman.emo.perf.metric.eng.MetricCached.collectCachedData(MetricCached.java:404)
     at oracle.sysman.emo.perf.metric.eng.MetricCollectorThread._collectCachedData(MetricCollectorThread.java:596)
     at oracle.sysman.emo.perf.metric.eng.MetricCollectorThread.run(MetricCollectorThread.java:320)
     at java.lang.Thread.run(Thread.java:534)

Can you paste the agent status on other node and emagent.trc here

Similar Messages

Error occurred in deployment step 'Uninstall app for SharePoint': The remote server returned an error: (502) Bad Gateway.

Installed SP 2013 Foundation in my Hyper-V machine
Created and done all the steps mentioned here http://blogs.msdn.com/b/shariq/archive/2013/05/07/how-to-set-up-high-trust-apps-for-sharepoint-2013-amp-troubleshooting-tips.aspx && http://msdn.microsoft.com/en-us/library/office/fp179901%28v=office.15%29.aspx
for self signed certificate
copied those two certificates in my local machine(base machine) D drive
(D:\Cert)
Both VM and base machine are in same domain
Installed VS 2013 in my base machine and create a Provided hosted app with the copied certificates, (For creation i followed the above mentioned URL)
Just created and hit F5 to run in my base machine, but getting this error
Error occurred in deployment step 'Uninstall app for SharePoint': The remote server returned an error: (502) Bad Gateway.
Please help me to resolve this issue, trying to figure out from last 2 days
Thanks in Advance
Arun

Hi Harminder,
This happens because an app has already been deployed and you are deploying it again using the same version.
Resolution:
Open the AppManifest.xml file and change the version.
Vivek Jagga - MCTS SharePoint
SharePointExcellence

For the last 2 days whenever I try to upload photos from my iPhoto page to facebook I get an error message: Bad Image There was a problem with the image file. I haven't knowingly changed any settings on iPhoto or facebook. Can anyone help, please ?

I need help with uploading photos from iPhoto to facebook. I could do it till 2 days ago. Now any new photo I try to upload gives me an error message:
Bad Image
There was a problem with the image file.
Please help.

Can you drag it to the Desktop?

URGENT - Error 400--Bad Request

When I run weblogic 6.0 default console I get "Error 400--Bad Request> From RFC
2068 Hypertext Transfer Protocol -- HTTP/1.1:"What does this mean ? Can u help
me to fix it !! Other than reinstall the whole WebLogic!!!
Another things is do you have and recommendation web site, eBook that teach "Using
Weblogic EJB with JBuider 6". Thank You

The solution was to switch to Apache's HttpClient. no more problems with SUN's HttpUrlConnection!

Test-ActiveSyncConnectivity fails with The remote server returned an error: (400) Bad Request.

Hi all,
I'm on the process of transition from Exchange 2003 to 2010, everything is going perfectly alright however ActiveSync is bugging me!
when I try to test activesync I get the following error:
[PS] C:\>Test-ActiveSyncConnectivity -MailboxCredential $user -TrustAnySSLCertificate |FL
RunspaceId : 136b8f68-26ec-4e29-a5bb-cf5ee816e04b
LocalSite : SITE
SecureAccess : True
VirtualDirectoryName :
Url :
UrlType : Unknown
Port : 0
ConnectionType : Plaintext
ClientAccessServerShortName : cas01
LocalSiteShortName : SITE
ClientAccessServer : CASSERVERNAME
Scenario : Options
ScenarioDescription : Issue an HTTP OPTIONS command to retrieve the Exchange ActiveSync protocol version.
PerformanceCounterName :
Result : Success
Error :
UserName : user1
StartTime : 12/12/2012 1:02:23 PM
Latency : 00:00:00.0312496
EventType : Success
LatencyInMillisecondsString : 31.25
Identity :
IsValid : True
RunspaceId : 136b8f68-26ec-4e29-a5bb-cf5ee816e04b
LocalSite : Reckon_NS
SecureAccess : True
VirtualDirectoryName :
Url :
UrlType : Unknown
Port : 0
ConnectionType : Plaintext
ClientAccessServerShortName : CASSERVERNAME
LocalSiteShortName : SITE
ClientAccessServer : CASSERVERNAME
Scenario : FolderSync
ScenarioDescription : Issue a FolderSync command to retrieve the folder hierarchy.
PerformanceCounterName : DirectPush Latency
Result : Failure
Error : [System.Net.WebException]: The remote server returned an error: (400) Bad Request.
HTTP response headers:
MS-Server-ActiveSync: 6.5.7638.1
Content-Length: 46
Cache-Control: private
Content-Type: text/html
Date: Wed, 12 Dec 2012 02:02:23 GMT
Server: Microsoft-IIS/7.5
X-AspNet-Version: 2.0.50727
X-Powered-By: ASP.NET
UserName : user1
StartTime : 12/12/2012 1:02:23 PM
Latency : -00:00:01
EventType : Error
LatencyInMillisecondsString :
Identity :
IsValid : True
environment:
Ex 2003 'Exchange' virtual directory permission: Integrated Windows Authentication, Basic
Ex 2003 'OMA' permission: Basic Authentication
Ex 2003 'ActiveSync' permission: Integrated, Basic
Ex 2010 successfully redirects users from 2010 to 2003 webmail if you login to OWA with a mailbox on 2003

Yes Martina,
It has been done through ESM
I cannot test using testexchangeconnectivity.com since I cannot put the 2010 one into production, I will get into trouble if I change the DNS record to the new mail server!
Yes, EAS works perfectly fine with 2010 mailboxes.
OK.
It might be that it's not possible to run Test-ActiveSyncConnectivity against a mailbox stored in Exchange 2003.
Installing KB937031 and enabling Windows Authentication is really all that needs to be done in EX03, in order for Exchange 2010 to proxy the EAS requests.
Martina Miskovic

Rest API v1 Getting Error 400 bad Request

Hi,
we have a very strange problem. We are using a custom JAVA WebDynpro UI for doing our approval workflows, and are making an upgrade from NW Version 7.0 to 7.31 (finally ). We have upgraded the DEV System without any troubles everything works fine with NW 7.31.
In the PROD IDM we have this scenario:
We have a Sandbox NW UI that was now upgraded to 7.31 and the PROD UI which still runs on 7.0. Both UIs have the PROD IDM DB linked.
There are several approval steps with a custom Request Object in our workflows.
Some approval steps work without any problems with the 7.31 UI, but in some steps we geht the Error 400 bad request from the REST Interface.
When I approve the same approval with the 7.0 UI it works fine. We also debugged the REST Call, which is sent to the rest service and can't find any differences, it looks like this:
http://<hostsbx>/idmrest/v72alpha/approvals/1568881/entries/545283/tasks/101870?APPROVED=TRUE which does not work
and
http://<hostprd>/idmrest/v72alpha/approvals/1568881/entries/545283/tasks/101870?APPROVED=TRUE which does work
There are other tasks which work with both UIs.
What else could we check?
BR,
Andreas

Hi,
thanks we also made the changes described in the note, which works on DEV fine.
It is strange that one approval task works and the other not, so I think the problem might not be in the NW Configuration?
BR,
Andreas

"the remote server returned an error (400) bad request." can't able to upload file size 1 MB

I cant able to upload the file size >1 MB its showing error."the remote server returned an error (400) bad request."
any one kindly help to fix the issue.

Hi,
Are you trying thru OOB or how..
Please check the "maximum file size for sharepoint".
refer below links for the same.
https://angler.wordpress.com/2012/03/21/increase-the-sharepoint-2010-upload-file-size-limit/
https://msdn.microsoft.com/en-us/library/ff487972.aspx
Don't forget to mark it as an Answer if it resolves your problem or Vote Me if it useful.
Mahesh

ESB Portal : The remote server returned an error: (400) Bad Request

Hi,
I am getting the below error message while trying to access ESB Portal:
========================
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 12/18/2013 12:07:10 PM
Event time (UTC): 12/18/2013 12:07:10 PM
Event ID: 2a429911fb69455ab3b77348c8b259ce
Event sequence: 10
Event occurrence: 2
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/ESB.Portal-1-130318418493427545
Trust level: Full
Application Virtual Path: /ESB.Portal
Application Path: C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\
Machine name: WIN-HG1MJEC7KJS
Process information:
Process ID: 3220
Process name: w3wp.exe
Account name: NT AUTHORITY\SYSTEM
Exception information:
Exception type: WebException
Exception message: The remote server returned an error: (400) Bad Request.
Request information:
Request URL: http://localhost/esb.portal/default.aspx
Request path: /esb.portal/default.aspx
User host address: ::1
User: WIN-HG1MJEC7KJS\ESBUser
Is authenticated: True
Authentication Type: Negotiate
Thread account name: NT AUTHORITY\SYSTEM
Thread information:
Thread ID: 4
Thread account name: NT AUTHORITY\SYSTEM
Is impersonating: False
Stack trace: at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
Custom event details:
====================
I also looked at thread : http://social.msdn.microsoft.com/Forums/en-US/1fb510a8-9f4b-4e1e-9261-3273b037786c/esbportal-bad-request-400?forum=biztalkesb
However didn't able to find the workaround for the same.
Best Regards,
Harkirat

Hi,
On a local server you don't have to change the web.config if you use local Windows Groups. Check if the User is added to the "BizTalk Server Administrators" Group. Also check if the Group or the User has rights to access EsbExceptionDb & ESBAdmin
database. You also have to enable "Windows Authentication" in IIS for the ESB.Portal.
Local Machine settings:
ESB.Exceptions.Service\Web.config
<connectionStrings><add providerName="System.Data.SqlClient" connectionString="Integrated Security=SSPI;Data Source=.;Initial Catalog=EsbExceptionDb" name="EsbExceptionDbConnectionString"/></connectionStrings>
C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Web.config
<connectionStrings>
<add name="AdminDatabaseServer" providerName="System.Data.SqlClient" connectionString="Network Library=dbmssocn;Data Source=(local);Integrated Security=True;Initial Catalog=ESBAdmin;"/>
</connectionStrings>
<authentication mode="Windows"/>
<authorization><allow roles="BizTalk Application Users"/>
<allow roles="BizTalk Server Administrators"/>
<allow roles="Administrators"/>
<deny users="*"/>
</authorization>
Kind regards,
Tomasso Groenendijk
Blog
| Twitter
MCTS BizTalk Server 2006, 2010
If this answers your question please mark it accordingly

Risport Service: The remote server returned an error: (502) Bad Gateway

Hi All.
I am using the CUCM (System version: 6.1.3.2000-1) Risport function to get device information.
When trying to connect to the service (https://<CUCM_IP>:8443/realtimeservice/services/RisPort) I receive the folowing error:
The remote server returned an error: (502) Bad Gateway
When entering the same URL into the browser on the same application server I get a Security Alert, user prompt and eventually the expected screen. So the service is running, but somhow I can not connect to it using the application.
Does anyone know how to solve this?
Thanks in advance

It is an C#.NET Windows Service.
I have solved "the problem". The service was running with "local system account". That user did not had the right proxy rights to connect to the CUCM service.
So I changed the Windows Service user to the account that I use to login on that machine (with the right proxy rights) and now it is working ;-)
I figured this out because when I logged into that machine, with my account, I could connect to the CUCM service without any problems with my browser.

Error: 400 "Bad Request" for "deletetree", file "": Unsupported protocol .

Hi
I have an C# application suddenly crashing after months of operation. The application is running on a Windows7 machine and is controlling 2 x NI6602 PCI counter cards through daqmx. The only clues to what when wrong is the following messages in the Windows Application Log.
Message 1 (occurring first):
LabVIEW information: Error: 400 "Bad Request" for "deletetree", file "": Unsupported protocol .
Message 2:
Faulting application name: RecordingStationGUI.exe, version: 1.0.0.0, time stamp: 0x4e3fa214Faulting module name: KERNELBASE.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdaaeException code: 0x80000003
Does anyone know what is causing this error and/or how I prevent this from happening again?
Regards,
mola

Where you ever able to resolve this issue? I have a very similar issue

Error 0x000012f bad image

Hi all, need help .
I already upgrade win 8 single language to win 8.1 single language, the problem is, error 0x000012f bad image appear when I login the windows mention this error for sync with One Drive Microsoft and will appear when I use Adobe Acrobat Reader to print
an pdf file. I have search about this error but all the solution not help me to solve this problem. anyone can help me ... ??
Pls tell me when u no the answer

They'll help you over here.
http://answers.microsoft.com/en-us/windows/forum/windows8_1?tab=Threads
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

A C-runtime error occured (bad allocation) from xmlViewService

Hi There,
I have a .NET code which calls OBI webservice xmlViewService. I observed xmlViewService.executeXMLQuery works fine when there are records between 0 - 80000, but when records go beyond 80000-100000 it fails & returns an exception "A C-runtime error occured (bad allocation)".
I tried gradually increasing the maxRowsPerPage from 10 to 100000 but in vain.
Below is the code am using:
sawSessionService = new SAWSessionService(obieeWebServiceUrl);
sawSessionService.Timeout = obieeTimeout;
XmlViewService xmlViewService = new XmlViewService(obieeWebServiceUrl);
xmlViewService.Timeout = obieeTimeout;
SAWSessionParameters sawSessionParms = CreateSawSessionParameters();
AuthResult logonResult = sawSessionService.logonex(obieeUserId, obieePassword, sawSessionParms);
sessionID = logonResult.sessionID;
ReportRef reportRef = new ReportRef();
reportRef.reportPath = request.ReportPath;
XMLQueryExecutionOptions xmlQueryOptions = new XMLQueryExecutionOptions();
xmlQueryOptions.async = false;
xmlQueryOptions.refresh = false;
xmlQueryOptions.maxRowsPerPage = 100000; //10;
xmlQueryOptions.presentationInfo = true;
xmlQueryOptions.type = "";
ReportParams reportParams = new ReportParams();
QueryResults queryResults = new QueryResults();
queryResults = xmlViewService.executeXMLQuery(reportRef, XMLQueryOutputFormat.SAWRowsetSchemaAndData, xmlQueryOptions, reportParams, sessionID);
Please help me solving the issue. Highly Appreciate any help.
Thanks - harry
Edited by: 887426 on Sep 26, 2011 12:45 AM

Hi Harry,
We face this issue, when the criteria returns lot of data. Is the issue resolved for you now? If yes, can you share your solution.
Thanks,
madhu

Solaris 10 SNMP SMA error: community_check() : bad community from localhost

I enabled SMA SNMP on my Solaris 10 servers (SunOS 5.10 on i86pc) and now i receive a lot of errormessages in my logs with the following message:
Oct 13 09:57:41 area3 /usr/lib/snmp/snmpdx: [ID 702911 daemon.error] community_check() : bad community from localhost
Oct 13 09:57:41 area3 /usr/lib/snmp/snmpdx: [ID 702911 daemon.error] session_open() failed for a pdu received from localhost.32923
Oct 13 09:57:42 area3 /usr/lib/snmp/snmpdx: [ID 702911 daemon.error] community_check() : bad community from localhost
Oct 13 09:57:42 area3 /usr/lib/snmp/snmpdx: [ID 702911 daemon.error] session_open() failed for a pdu received from localhost.32923
Oct 13 09:57:43 area3 /usr/lib/snmp/snmpdx: [ID 702911 daemon.error] community_check() : bad community from localhost
Oct 13 09:57:43 area3 /usr/lib/snmp/snmpdx: [ID 702911 daemon.error] session_open() failed for a pdu received from localhost.32923
i searched the internet but it seems that this error should be resolved in my Solaris version.
How can i resolve this error?

Hi,
Welcome to oracle forums :)
Refer links:
http://forums.sun.com/thread.jspa?threadID=5065724
http://www.sunmanagers.org/pipermail/sunmanagers/2006-November/042435.html
http://unix.derkeiler.com/Newsgroups/comp.unix.solaris/2004-07/0089.html
Hope helps
Regards,
X A H E E R

Export for system copy fails - Error 9 (Bad file number)

Hello all,
I am attempting to perform the export phase for a hetergenous system copy on our BI system (BI 7.0 - NW2004s). This system runs on HP-UX 11.11 using Oracle 10.2.0.2 and will be migrated to Windows Server 2003 and MS SQL Server 2005, once the export is complete.
While running sapinst to export the data from the source system, there are several input dialog screens that are skipped, which means I am not able to enter all the paramters used for the export. After seeing this behavior from sapinst, I reviewed the sapinst.log and sapinst_dev.log files and find the warning/error "System call failed. Error 9 (Bad file number)". I have included a portion of these files below.
I have reviewed notes 546006 and 583861, but these seem to refer to an Oracle error ORA-27121, but I am not receiving any Oracle errors in sapinst.log or the Oracle alert log. I have looked for possible permission or ownership problems with any of the SAP or Oracle files, but have not found any that were incorrect. Also, these errors do not specify which file sapinst is having problems with, so I do not have a specific file or area to check.
If anyone has seen something similar to this and has any suggestions, I would greatly appreciate any help.
sapinst.log details:
INFO 2009-02-14 15:15:51.67
Execute step collect of component |NW_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|NW_readProfileDir|ind|ind
|ind|ind|0|0
INFO 2009-02-14 15:15:52.737
Account bwpadm already exists.
WARNING 2009-02-14 15:15:52.747
System call failed. Error 9 (Bad file number) in execution of system call 'getgrent' with parameter (), line (292) in file (syuxcuse
r.cpp).
INFO 2009-02-14 15:15:52.757
Account 0 already exists.
WARNING 2009-02-14 15:15:52.777
System call failed. Error 9 (Bad file number) in execution of system call 'getgrent' with parameter (), line (292) in file (syuxcuse
r.cpp).
INFO 2009-02-14 15:15:52.777
Account 200 already exists.
WARNING 2009-02-14 15:15:52.827
System call failed. Error 9 (Bad file number) in execution of system call 'getgrent' with parameter (), line (292) in file (syuxcuse
r.cpp).
INFO 2009-02-14 15:16:04.937
Creating file /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/ypcat.log.
INFO 2009-02-14 15:16:05.007
Output of ypcat passwd.byname is written to the logfile ypcat.log.
sapinst_dev.log details:
TRACE      2009-02-14 15:15:52.737
2009-02-14 15:15:52.743 NW._getSAPMount() done: /sapmnt
INFO       2009-02-14 15:15:52.737 [syuxcaccmg.cpp:227]
           bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
Account bwpadm already exists.
TRACE      2009-02-14 15:15:52.747 [syuxcuser.cpp:1943]
           CSyUserImpl_getOsInfos(ILogBook *m_logBook, iastring sName, iastring sID, tSyUserInfo& msUserinfo)
getspnam(bwpadm) returned NULL.
WARNING    2009-02-14 15:15:52.747 [syxxsyshlp.cpp:78]
           syslib::printOSError(const iastring &, int, DWORD, const iastring &, CMessage::eLogMessage)
System call failed. Error 9 (Bad file number) in execution of system call 'getgrent' with parameter (), line (292) in file (syuxcuse
r.cpp).
Regards,
Rusty Robbins

Hello Peter,
Thanks for the reply. I did confirm the points you made, and have the details below.
1. check filesystem, if you have enough space, especially /tmp
All filesystems have available space, and /tmp has 310 MB available, before the start of sapinst.
2. check again alert log, trace log for Oracle,
I could not find any errors in the alert_SID.log or any unusual trace files.
3. How did you run sapinst? Are you using "root" account.
I am running sapinst as user root and I am following all the recomendations in the system copy guide (at least as far as I can tell. ;p )
We have four BI systems in this landscape, and the other three have migrated successfully. The procedure I am using, is the same as for the other 3 systems and uses the same SAP media directory that was used on the other systems.
One other item that may be part of my problem here, is that this system is the production system, and was originally installed as a high-availability system, using HP-UX Service Guard for clustering. Currently, this system does not have fail-over enabled, but of course the cluster is still intact. One required piece of the Service Guard enviornment is the use of a virtual hostname. This seems to resolve successfully by sapinst, as I see the correct (virtual) hostname referenced several times. While this is a clustered system (for fail-over purposes), the CI and DB are installed on the same host. So it is not a distributed system, and if failover had been initiated, it would fail both the CI and DB instance, which is the same and only SAP instance.
This did raise one question in my mind, however. I am attempting to extract this using the following menu path within sapinst.
SAP NetWeaver 7.0 Support Release 3 --> Software Life-Cycle Options --> System Copy --> Oracle --> Source System Export --> Central System --> Based on AS ABAP and AS Java
Since this does use Service Guard, but is not a distributed system, should I be using a different path in the sapinst tree, for the export? I have only performed a migration using the above path, so I am not familar with the detailf of the other types, such as High-Availabitly or Distributed-System.
Regards,
Rusty

HTTP Error 502: Bad Gateway

Whenever I try to download a new ringtone or even get on t-zones for that matter, this message always comes up that says HTTP Error 502: Bad Gateway. What does this mean? How do I fix it? This is really annoying!!!!

Hi,
Can anyone help me how to read my email from blackberry pearl 8120 model, when try to open it shows HTTP error 502 bad gateway and how to rectify the problems.
ramlaks
ramlaks

ERROR: authenticateHTTPConnection: bad peer on RAC enviroment

Similar Messages

Maybe you are looking for