Error building executable

Bonjour à tous,
Lorsque  je terminais ma semaine hier, j'ai voulu réaliser un dernier test sur un Touch Panel, mais lorsque j'ai voulu construire l'executable sous Labview 2009, celui ci m'a affiché cette erreur :
Error building executable. Unable to create file
Quelqu'un saurait d'où vient cette erreur et comment la corriger? Elle est apparue comme ça sans réels changements du code, ce qui d'autant plus étrange!!
Merci pour vos réponses!

J'ai ce type d'erreur de temps en temps, pour moi dans 50% des cas, il suffit de quitter LabVIEW, de ré-ouvrir le projet, relancer le build et ça marche.
Sinon il faut que tu donnes plus de détails...
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

Similar Messages

  • Error 8 File permission error while building executable for a RT

    I got error 8 File permission error while building executable for a RT. It happened always after build, I mean new startup.rtexe and startup.alias files have been created. At the build properties, it was set use default .alias file.
    I had the executable built successfully at one time.
    The detail message is:
    Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
    Error 8 occurred at Open/Create/Replace File in RTBEP_Generate_Deploy_Instructions.vi->RTBEP_Invoke_Build_Engine.vi->RTBUIP_Build_Invoke.vi->RTBUIP_Build_Rule_Editor.vi->RTBUIP_Open_Properties.vi->RTBUIP_Item_OnDoProperties.vi->RTBUIP_Item_OnDoProperties.vi.ProxyCaller
    Possible reason(s):
    LabVIEW:  File permission error. You do not have the correct permissions for the file.
    =========================
    NI-488:  DMA hardware error detected.
    I checked relevant posts, couldn't find any clue.
    Please give me some ideas.
    Thanks.

    Hi Ya-hoo,
    Error building application in LabView 8.0 seems to describe a similar situation. The .alias file is important, as described in that discussion forum.
    Cheers.
    | Michael K | Project Manager | LabVIEW R&D | National Instruments |

  • Unable To Build Executable: Error in finding run directory

    Sun WorkShop C++ Compiler Version 5.0
    Trying to compile, link and build executable.
    Did I overlook something ?
    # CC -o server server.c
    Error in finding run directory. Using default /opt/SUNWspro/bin
    Segmentation Fault - core dumped
    #

    <pre>
    Hi EldridRensburg,
    Following is an excerpt from one of the answer/solution
    provided to similar reported problem. Please see if this
    is the same case with you.
    ````````````````````````````````````````````````````
    This problem occurs when the source code directory is NFS-mounted
    but the permission of the mount point before mounting is not
    consistent with the permissions of the remote file system.
    e.g.,
    # ls -ld /mnt
    drwxrwxrw- 2 root sys 512 Dec 15 22:52 /mnt
    # mount foo:/tmp /mnt
    # ls -ld /mnt
    drwxrwxrwx 7 root root 2037 Feb 18 16:35 /mnt
    As a user:
    % cd /mnt
    % ls -ld /mnt
    drwxrwxrwx 7 root 2037 Feb 18 16:41 /mnt/
    % /opt/SUNWspro/bin/cc hello.c
    Error in finding run directory. Using default /opt/SUNWspro/binSegmentation
    Fault (core dumped)
    % cd ..
    ..: Permission denied
    Note that if the mount point /mnt does not have "x" permission for
    others before the mount, the compiler will fail.
    Make sure the permissions of the mount point is consistent
    with the remote file system before mounting.
    ``````````````````````````````````````````````````
    Thanks
    Kalpesh
    </pre>

  • Error while executing DTP

    Hi gurus,
    Iam trying to extract the data from r/3 using generic extractor the data is loaded into PSA sucessfully, but iam getting following errors while executing DTP.
    1.An error occurred while executing a transformation rule:
    The exact error message is:
    The argument 'EA' cannot be interpreted as a number
    The error was triggered at the following point in the program
    GP4D35STLXQI3SHIVNQC2FSJ7MB 791
    2.The data record was filtered out because data records with the same key
    have already been filtered out in the current step for other reasons and
    the current update is non-commutative (for example, MOVE). This means
    that data records cannot be exchanged on the basis of the semantic key.
    Please guide me accordingly.
    Regards
    Amar.

    Hi
    While mapping the Qty Fields it is must to add UOM to the Qty Fields and map it with relevant Info Objects.
    The Semantic Keys defined at DTP are also has some issues, try to give a dummy key figure if you are using DSO in the data flow as the DSO has the Overwrite mode.
    (Choose  Semantic Groups to specify how you want to build the data packages that are read from the source (DataSource or InfoProvider). To do this, define key fields. Data records that have the same key are combined in a single data package. This setting is only relevant for DataStore objects with data fields that are overwritten. This setting also defines the key fields for the error stack. By defining the key for the error stack, you ensure that the data can be updated in the target in the correct order once the incorrect data records have been corrected.)
    Hope it helps and clear

  • LabVIEW 2011SP1 Error building installer: LabVIEW Run-Time Engine 2013 is missing 3 dependencies???

    I'm having a problem building an installer in LabVIEW 2011SP1.
    It's been a while since I've tried to build an installer but it used to work fine and building executables is still working fine.
    Now when I try to build the installer I get "The build was unsuccessful."
    Possible reasons: Error generating preview for My Application 3.1.7.
    Details:
    Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
    CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> IB_MSI.lvclass:Build.vi >> IB_MSI.lvclass:Engine_InitializeDistribution.vi >> IB_MSI.lvclass:Report_Preview_Error.vi >> IB_Source_Container.lvclass:Report_Preview_Error.vi
    Loading product deployment information
    *** WARNING ***
    NI LabVIEW Run-Time Engine 2013 is missing 3 dependencies. This product, or other products that depend upon NI LabVIEW Run-Time Engine 2013, may not function properly while the dependencies are missing.  Visit ni.com/info and enter the Info Code "" for more information.
    *** Error: An internal error occurred for which the cause is unknown. (Error code -41)
    *** Error Details:
    Error in MDF API function: _MDFCommon_GetNextLogMessage
    Error in MDF::GetInstance - MDF static instance is not initialized!
    *** End Error Report
    Loading product deployment information
    *** WARNING ***
    NI LabVIEW Run-Time Engine 2013 is missing 3 dependencies. This product, or other products that depend upon NI LabVIEW Run-Time Engine 2013, may not function properly while the dependencies are missing.  Visit ni.com/info and enter the Info Code "" for more information.
    The really strange thing about this is that I'm using LabVIEW 2011SP1, I don't even have LabVIEW 2013 installed, not even the runtime.
    Where is the problem? Why is it even complaining about LabVIEW 2013? Has anyone seen this before?
    Troy
    CLDEach snowflake in an avalanche pleads not guilty. - Stanislaw J. Lec
    I haven't failed, I've found 10,000 ways that don't work - Thomas Edison
    Beware of the man who won't be bothered with details. - William Feather
    The greatest of faults is to be conscious of none. - Thomas Carlyle
    Solved!
    Go to Solution.

    I do have the LabVIEW 2013 discs but didn't install it.
    I checked in Control Panel > Programs and Features > National Instruments Software and the LabVIEW 2013 Run-Time is not listed there.
    I also checked in MAX > Software and I must have missed it the first time I looked. LabVIEW Run-Time 2013 is listed there after all.
    Now I remember installing VISA 5.4 to get rid of a nasty bug. It must have installed the 2013 Run-Time when I did that.
    So now I need to distribute 2 runtimes with my application?!?!
    Troy
    CLDEach snowflake in an avalanche pleads not guilty. - Stanislaw J. Lec
    I haven't failed, I've found 10,000 ways that don't work - Thomas Edison
    Beware of the man who won't be bothered with details. - William Feather
    The greatest of faults is to be conscious of none. - Thomas Carlyle

  • Web Analysis Error -- Error while executing query and retrieving data

    Regarding Web Analysis:
    We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
    The error is:
    Error while executing query and retrieving data.; nested exception is:
    com.hyperion.ap.APException: [1033] Native:
    1013033[Thu Oct 22 09:08:17
    2009]server name/application name/database name/user name/Error91013033)
    ReportWriter exit abnormally
    Does anyone have any insight into what is going on?
    My version information is:
    Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
    Web Analysis 9.3.0.0.0.286
    Thanks in advance for your help.
    DaveW

    Hi,
    And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
    And if you get any error in checking, see the long message(detail).
    With rgds,
    Anil Kumar Sharma .P

  • Fatal error while executing the DQS installer on SQL Server 2014

    Hi all.
    I am receiving the following error when attempting to install DQS on the following platform:
    Windows Server 2012
    Microsoft SQL Server 2014 - 12.0.2000.8 (X64)   Feb 20 2014 20:04:26   Copyright (c) Microsoft Corporation  Enterprise Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
    (no entries in event viewer)
    Error is:
    [4/15/2015 8:45:04 AM] Fatal error while executing the DQS installer.
    Microsoft.Ssdqs.Proxy.ImportExport.ImportExportException: Error occurred in a server proxy call during the import/export process. ---> Microsoft.Ssdqs.Proxy.ImportExport.ImportProcessFailedException: System.NullReferenceException: Object reference not set
    to an instance of an object.
       at System.Security.Cryptography.CryptoStream..ctor(Stream stream, ICryptoTransform transform, CryptoStreamMode mode)
       at Microsoft.Ssdqs.ImportExportManagement.ImportExport.ImportExportReader..ctor(Stream stream)
       at Microsoft.Ssdqs.ImportExportManagement.ImportExport.ImportExportManager.Import(Stream input)
       at Microsoft.Ssdqs.ImportExportManagement.Calibrator.ImportKnowledgebaseCalibrator.Calibrate(IMasterContext masterContext, CalibrationMode calibrationMode, ConfigurationDomParameter calibratorConfiguration)
       at Microsoft.Ssdqs.Core.Service.Calibration.Impl.ExecuteCalibratorFlow.Process(IMasterContext context)
       --- End of inner exception stack trace ---
       at Microsoft.Ssdqs.Proxy.ImportExport.ImportAsProcessManager.WaitUntillProcessCompletes(Int64 processId, Int64 knowledgebaseId, ImportExportCancellationToken cancelToken)
       at Microsoft.Ssdqs.Proxy.ImportExport.ImportAsProcessManager.KnowledgebaseImport(String kbName, String kbDescription, String fileName, ImportExportCancellationToken cancelToken)
       at Microsoft.Ssdqs.DqsInstaller.Logic.Actions.LoadOutOfTheBoxDataAction.Execute()
       at Microsoft.Ssdqs.DqsInstaller.Logic.ActionExecuter.ExecuteAllActions()
       at Microsoft.Ssdqs.DqsInstaller.Logic.Installer.Main(String[] args)
    Thanks for any advice you can give.
    Full log below:
    Microsoft (R) DQS Installer Command Line Tool
    Copyright (c) 2014 Microsoft. All rights reserved.
    [4/15/2015 7:58:20 AM] DQS Installer started. Installation log will be written to C:\Program Files\Microsoft SQL Server\MSSQL12.DW01\MSSQL\Log\DQS_install.log
    [4/15/2015 7:58:20 AM] Setting the collation to default value: SQL_Latin1_General_CP1_CI_AS
    [4/15/2015 7:58:20 AM] Using instance: DW01, catalog: DQS.
    [4/15/2015 7:58:20 AM] Executing action: Validate collation argument.
    [4/15/2015 7:58:20 AM] Action 'Validate collation argument' finished successfully.
    [4/15/2015 7:58:20 AM] Executing action: Check whether system reboot is pending.
    [4/15/2015 7:58:20 AM] Action 'Check whether system reboot is pending' finished successfully.
    [4/15/2015 7:58:20 AM] Executing action: Create data quality event source.
    [4/15/2015 7:58:20 AM] Action 'Create data quality event source' finished successfully.
    [4/15/2015 7:58:20 AM] Executing action: Request Database Master Key password from user..
    Microsoft (R) DQS Installer Command Line Tool
    Copyright (c) 2014 Microsoft. All rights reserved.
    [4/15/2015 8:39:59 AM] DQS Installer started. Installation log will be written to C:\Program Files\Microsoft SQL Server\MSSQL12.DW01\MSSQL\Log\DQS_install.log
    [4/15/2015 8:39:59 AM] Parsing DqsInstaller command line arguments.
    [4/15/2015 8:39:59 AM] Setting the catalog to default value: DQS
    [4/15/2015 8:39:59 AM] Setting the collation to default value: SQL_Latin1_General_CP1_CI_AS
    [4/15/2015 8:39:59 AM] Using instance: DEV01, catalog: DQS.
    [4/15/2015 8:39:59 AM] Executing action: Validate collation argument.
    [4/15/2015 8:39:59 AM] Action 'Validate collation argument' finished successfully.
    [4/15/2015 8:39:59 AM] Executing action: Check whether system reboot is pending.
    [4/15/2015 8:39:59 AM] Action 'Check whether system reboot is pending' finished successfully.
    [4/15/2015 8:39:59 AM] Executing action: Create data quality event source.
    [4/15/2015 8:39:59 AM] Action 'Create data quality event source' finished successfully.
    [4/15/2015 8:39:59 AM] Executing action: Request Database Master Key password from user..
    [4/15/2015 8:41:05 AM] Action 'Request Database Master Key password from user.' finished successfully.
    [4/15/2015 8:41:05 AM] Executing action: Approve removal of data quality services previous schema.
    [4/15/2015 8:41:05 AM] Action 'Approve removal of data quality services previous schema' finished successfully.
    [4/15/2015 8:41:05 AM] Executing action: Load Installation Scripts.
    [4/15/2015 8:41:05 AM] Extracting script to: C:\Users\SqlServiceAcct\AppData\Local\Temp\3mo2vwbu.xch
    [4/15/2015 8:41:06 AM] Extracting script: db\create_core_db_objects.sql
    [4/15/2015 8:41:06 AM] Extracting script: db\create_logic_db_objects.sql
    [4/15/2015 8:41:06 AM] Extracting script: db\create_transient_db_objects.sql
    [4/15/2015 8:41:06 AM] Extracting script: db\static_data.sql
    [4/15/2015 8:41:06 AM] Extracting script: db\drop_dq_databases.sql
    [4/15/2015 8:41:06 AM] Extracting script: db\db_version.sql
    [4/15/2015 8:41:06 AM] Extracting script: helper\DeleteSchemaDs.sql
    [4/15/2015 8:41:06 AM] Extracting script: sql\drop_all_assemblies.sql
    [4/15/2015 8:41:06 AM] Extracting script: sql\create_databases.sql
    [4/15/2015 8:41:06 AM] Extracting script: sql\drop_databases.sql
    [4/15/2015 8:41:06 AM] Extracting script: sql\drop_all_tables.sql
    [4/15/2015 8:41:06 AM] Extracting script: sql\drop_database_properties.sql
    [4/15/2015 8:41:06 AM] Extracting script: sql\master_create.sql
    [4/15/2015 8:41:06 AM] Extracting script: sql\master_recreate.sql
    [4/15/2015 8:41:06 AM] Extracting script: sql\register_assemblies.sql
    [4/15/2015 8:41:06 AM] Extracting script: sql\register_assemblies_tsql.sql
    [4/15/2015 8:41:06 AM] Extracting script: sql\register_dq_assemblies.sql
    [4/15/2015 8:41:06 AM] Extracting script: sql\create_service_broker_objects.sql
    [4/15/2015 8:41:06 AM] Extracting script: sql\drop_service_broker_objects.sql
    [4/15/2015 8:41:06 AM] Extracting script: db\set_dq_databases_single_user.sql
    [4/15/2015 8:41:06 AM] Extracting script: db\set_dq_databases_multi_user.sql
    [4/15/2015 8:41:06 AM] Extracting script: db\upgrade_all_versions.sql
    [4/15/2015 8:41:06 AM] Extracting script: recreate_schema.bat
    [4/15/2015 8:41:06 AM] Extracting script: upgrade_schema.bat
    [4/15/2015 8:41:06 AM] Extracting script: upgrade_version_tables.bat
    [4/15/2015 8:41:06 AM] Extracting script: drop_databases.cmd
    [4/15/2015 8:41:06 AM] Extracting script: register_dlls.cmd
    [4/15/2015 8:41:06 AM] Extracting script: unregister_dlls.cmd
    [4/15/2015 8:41:06 AM] Extracting script: assembly_paths_retail.txt
    [4/15/2015 8:41:06 AM] Extracting script: DQS_Data.dqs
    [4/15/2015 8:41:06 AM] Extracting script: DefaultKbs.xml
    [4/15/2015 8:41:06 AM] Total scripts extracted: 31
    [4/15/2015 8:41:06 AM] Action 'Load Installation Scripts' finished successfully.
    [4/15/2015 8:41:06 AM] Executing action: Create data quality schema.
    [4/15/2015 8:41:06 AM] Script: 'recreate_schema.bat CMTSQLSVR04\DEV01 DQS SQL_Latin1_General_CP1_CI_AS'
    [4/15/2015 8:41:06 AM] .  Trying to connect using Windows Authentication and db name...
    [4/15/2015 8:41:06 AM] Run create_databases.sql to create Data Quality Service databases if they do not exist.
    [4/15/2015 8:41:07 AM] 
    [4/15/2015 8:41:07 AM]  --> Running File: create_databases.sql
    [4/15/2015 8:41:07 AM] ---[ Creating databases ]---
    [4/15/2015 8:41:07 AM] Changed database context to 'master'.
    [4/15/2015 8:41:10 AM] 
    [4/15/2015 8:41:10 AM]  --> Running File: drop_dq_database.sql
    [4/15/2015 8:41:10 AM] ---[ Dropping Data Quality Databases ]---
    [4/15/2015 8:41:10 AM] Creating DQS databases (DQS_MAIN, DQS_PROJECTS, DQS_STAGING_DATA)...
    [4/15/2015 8:41:10 AM] Configuring DQS databases
    [4/15/2015 8:41:10 AM] Configuration option 'clr enabled' changed from 0 to 1. Run the RECONFIGURE statement to install.
    [4/15/2015 8:41:10 AM] Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install.
    [4/15/2015 8:41:10 AM] Configuration option 'xp_cmdshell' changed from 0 to 1. Run the RECONFIGURE statement to install.
    [4/15/2015 8:41:10 AM] Creating Master Key for database DQS_MAIN...
    [4/15/2015 8:41:10 AM] Creating Module Signing Certificate for database DQS_MAIN...
    [4/15/2015 8:41:10 AM] Exporting Certificate from DQS_MAIN
    [4/15/2015 8:41:10 AM] Importing Certificate into DQS_PROJECTS
    [4/15/2015 8:41:10 AM] Configuration option 'xp_cmdshell' changed from 1 to 0. Run the RECONFIGURE statement to install.
    [4/15/2015 8:41:10 AM] Creating DQS roles
    [4/15/2015 8:41:10 AM] Run master_recreate.sql to recreate Data Quality Service Main and Projects Databases and drop all tables including known temporary tables.
    [4/15/2015 8:41:10 AM] 
    [4/15/2015 8:41:10 AM]  --> Running master_recreate.sql
    [4/15/2015 8:41:10 AM] ---[ Recreate DQS Main and Projects Databases ]---
    [4/15/2015 8:41:10 AM] Changed database context to 'DQS_STAGING_DATA'.
    [4/15/2015 8:41:10 AM] 
    [4/15/2015 8:41:10 AM]  --> Running File: drop_database_properties.sql
    [4/15/2015 8:41:10 AM] ---[ Dropping Database Properties]---
    [4/15/2015 8:41:10 AM] Changed database context to 'DQS_PROJECTS'.
    [4/15/2015 8:41:10 AM] 
    [4/15/2015 8:41:10 AM]  --> Running File: drop_all_tables.sql
    [4/15/2015 8:41:10 AM] ---[ Dropping all SSDQS Database objects and KB schemas ]---
    [4/15/2015 8:41:10 AM] 
    [4/15/2015 8:41:10 AM]  --[ Drop all Symmetric Keys ]
    [4/15/2015 8:41:10 AM] 
    [4/15/2015 8:41:10 AM]  --[ Drop all Certificates ]
    [4/15/2015 8:41:10 AM] 
    [4/15/2015 8:41:10 AM]  --[ Drop all FK constraints ]
    [4/15/2015 8:41:10 AM] 
    [4/15/2015 8:41:10 AM]  --[ Drop all views ]
    [4/15/2015 8:41:10 AM] 
    [4/15/2015 8:41:10 AM]  --[ Drop all tables and synonyms ]
    [4/15/2015 8:41:10 AM] 
    [4/15/2015 8:41:10 AM]  --[ Drop all database triggers ]
    [4/15/2015 8:41:10 AM] 
    [4/15/2015 8:41:10 AM]  --[ Drop all stored procedures in Knowledge Base schemas ]
    [4/15/2015 8:41:10 AM] 
    [4/15/2015 8:41:10 AM]  --[ Drop all types in Knowledge Base schemas ]
    [4/15/2015 8:41:10 AM] 
    [4/15/2015 8:41:10 AM]  --[ Drop all Knowledge Base schemas ]
    [4/15/2015 8:41:10 AM] 
    [4/15/2015 8:41:10 AM]  --> Running File: drop_database_properties.sql
    [4/15/2015 8:41:10 AM] ---[ Dropping Database Properties]---
    [4/15/2015 8:41:10 AM] Changed database context to 'DQS_MAIN'.
    [4/15/2015 8:41:10 AM] 
    [4/15/2015 8:41:10 AM]  --> Running File: drop_all_tables.sql
    [4/15/2015 8:41:10 AM] ---[ Dropping all SSDQS Database objects and KB schemas ]---
    [4/15/2015 8:41:11 AM] 
    [4/15/2015 8:41:11 AM]  --[ Drop all Symmetric Keys ]
    [4/15/2015 8:41:11 AM] 
    [4/15/2015 8:41:11 AM]  --[ Drop all Certificates ]
    [4/15/2015 8:41:11 AM] 
    [4/15/2015 8:41:11 AM]  --[ Drop all FK constraints ]
    [4/15/2015 8:41:11 AM] 
    [4/15/2015 8:41:11 AM]  --[ Drop all views ]
    [4/15/2015 8:41:11 AM] 
    [4/15/2015 8:41:11 AM]  --[ Drop all tables and synonyms ]
    [4/15/2015 8:41:11 AM] 
    [4/15/2015 8:41:11 AM]  --[ Drop all database triggers ]
    [4/15/2015 8:41:11 AM] 
    [4/15/2015 8:41:11 AM]  --[ Drop all stored procedures in Knowledge Base schemas ]
    [4/15/2015 8:41:11 AM] 
    [4/15/2015 8:41:11 AM]  --[ Drop all types in Knowledge Base schemas ]
    [4/15/2015 8:41:11 AM] 
    [4/15/2015 8:41:11 AM]  --[ Drop all Knowledge Base schemas ]
    [4/15/2015 8:41:11 AM] 
    [4/15/2015 8:41:11 AM]  --> Running File: drop_database_properties.sql
    [4/15/2015 8:41:11 AM] ---[ Dropping Database Properties]---
    [4/15/2015 8:41:11 AM] 
    [4/15/2015 8:41:11 AM]  --> Running master_create.sql
    [4/15/2015 8:41:11 AM] ---[ Creating and Populating Main DQS DB ]---
    [4/15/2015 8:41:11 AM] Changed database context to 'DQS_STAGING_DATA'.
    [4/15/2015 8:41:11 AM] Changed database context to 'DQS_PROJECTS'.
    [4/15/2015 8:41:11 AM] Changed database context to 'DQS_MAIN'.
    [4/15/2015 8:41:11 AM] 
    [4/15/2015 8:41:11 AM]  --> Running File: create_core_db_objects.sql
    [4/15/2015 8:41:11 AM] ---[  Creating Certificates  ]---
    [4/15/2015 8:41:11 AM] 
    [4/15/2015 8:41:11 AM] ---[  Creating Symmetric Keys  ]---
    [4/15/2015 8:41:11 AM] 
    [4/15/2015 8:41:11 AM] ---[  Creating Tables  ]---
    [4/15/2015 8:41:11 AM] Creating Table:     A_TEST   
    [4/15/2015 8:41:11 AM] Creating Table:     A_TEST2   
    [4/15/2015 8:41:11 AM] Creating Table:     A_FLOW   
    [4/15/2015 8:41:11 AM] Creating Table:     A_FLOW_ANSWER   
    [4/15/2015 8:41:11 AM] Creating Table:     A_EXECUTION_UNIT
    [4/15/2015 8:41:11 AM] Creating Table:     A_CODE_GROUP   
    [4/15/2015 8:41:11 AM] Creating Table:     A_CODE_MEMBER   
    [4/15/2015 8:41:11 AM] Creating Table:     A_CONFIGURATION   
    [4/15/2015 8:41:11 AM] Creating Table:     A_PROCESS   
    [4/15/2015 8:41:11 AM] Creating Table:     A_SERVICE_BROKER_TASK   
    [4/15/2015 8:41:11 AM] Creating Table:     A_KNOWLEDGEBASE   
    [4/15/2015 8:41:11 AM] Creating Table:     A_KNOWLEDGEBASE_AUDIT   
    [4/15/2015 8:41:11 AM] Creating Table:     A_KNOWLEDGEBASE_ACTIVITY   
    [4/15/2015 8:41:11 AM] Creating Table:     A_PROFILING_ACTIVITY_ARCHIVE   
    [4/15/2015 8:41:11 AM] Creating Table:     A_CLIENT_SESSION   
    [4/15/2015 8:41:11 AM] Creating Table:     A_REFERENCE_DATA_PROVIDER   
    [4/15/2015 8:41:11 AM] Creating Table:     A_REFERENCE_DATA_PROVIDER_SCHEMA   
    [4/15/2015 8:41:11 AM] Creating Table:     A_REFERENCE_DATA_CACHE   
    [4/15/2015 8:41:11 AM] Creating Table:     A_REFERENCE_DATA_CACHE_SUGGESTION   
    [4/15/2015 8:41:11 AM] Creating Table:     A_REFERENCE_DATA_CACHE_SUGGESTION_PARSED   
    [4/15/2015 8:41:11 AM] Creating Table:     A_REFERENCE_DATA_AUDIT   
    [4/15/2015 8:41:11 AM] Creating Table:     A_IMPORTED_PROJECT   
    [4/15/2015 8:41:11 AM] Creating Table:     A_SPELLER_DICTIONARY_VALUE   
    [4/15/2015 8:41:11 AM] Creating Table:     A_SPECIAL_CHARACTER_RULE   
    [4/15/2015 8:41:11 AM] Creating Table:     A_PERSISTENT_CACHE   
    [4/15/2015 8:41:11 AM] Creating Table:     A_TEMPLATE_OBJECTS   
    [4/15/2015 8:41:11 AM] Creating Table:     A_TEMPLATE_FOREIGN_KEYS   
    [4/15/2015 8:41:11 AM] Creating Table:     A_TEMPLATE_COLUMNS   
    [4/15/2015 8:41:11 AM] ---[ Creating Views ]---
    [4/15/2015 8:41:11 AM] Creating View:      V_A_FLOW
    [4/15/2015 8:41:11 AM] Creating View:      V_A_KNOWLEDGEBASE
    [4/15/2015 8:41:11 AM] Creating View:      V_A_KNOWLEDGEBASE_AUDIT
    [4/15/2015 8:41:11 AM] Creating View:     V_A_REFERENCE_DATA_PROVIDER   
    [4/15/2015 8:41:11 AM] Changed database context to 'DQS_PROJECTS'.
    [4/15/2015 8:41:11 AM] Changed database context to 'DQS_MAIN'.
    [4/15/2015 8:41:11 AM] 
    [4/15/2015 8:41:11 AM]  --> Running File: static_data.sql
    [4/15/2015 8:41:11 AM] ---[ Inserting Data ]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[Insert Cleansing configuration section]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[Insert Logging settings section]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[Insert Logging settings section]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[Insert Association configuration section]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[Insert DataValueService configuration section]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[Insert Association rules configuration section]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[Insert IndexService configuration section]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[Insert Knowledgebase configuration section]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[Insert Notification configuration section]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[Insert Interactive Cleansing configuration section]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[Reference Data configuration section]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[Insert client paging configuration section]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[Insert client process sampling configuration section]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[Matching configuration section]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[Profiling configuration section]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[Process configuration section]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[FileStorageManager configuration section]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[ImportExportManager configuration section]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[Reference Data Add provider]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[Reference Data Add provider schema]---
    [4/15/2015 8:41:11 AM] ---[Add Special characters for term normalization]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] 
    [4/15/2015 8:41:11 AM]  --> Running File: db_version.sql
    [4/15/2015 8:41:11 AM] ---[ Running version related work ]---
    [4/15/2015 8:41:11 AM] Changed database context to 'DQS_MAIN'.
    [4/15/2015 8:41:11 AM] Creating Table:     A_DB_VERSION_INFO   
    [4/15/2015 8:41:11 AM] Creating Table:     A_DB_VERSION   
    [4/15/2015 8:41:11 AM] Creating Table:     A_DB_VERSION_UPGRADE_SCRIPTS   
    [4/15/2015 8:41:11 AM] Creating Table:     A_DB_VERSION_UPGADE_SCRIPT_PATH   
    [4/15/2015 8:41:11 AM] Creating view:     V_DB_VERSION 
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (0 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (0 rows affected)
    [4/15/2015 8:41:11 AM] ---[Add DB Version information]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (0 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (0 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (0 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[Add DB Version upgrade scripts]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[Add DB Version upgrade scripts path]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] ---[Add DB Version upgrade scripts path]---
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] (1 rows affected)
    [4/15/2015 8:41:11 AM] Changed database context to 'DQS_PROJECTS'.
    [4/15/2015 8:41:11 AM] Creating Table:     A_DB_VERSION in PROJECTS database 
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM]
    [4/15/2015 8:41:11 AM] Action 'Create data quality schema' finished successfully.
    [4/15/2015 8:41:11 AM] Executing action: Register data quality assemblies and stored procedures.
    [4/15/2015 8:41:11 AM] Script: 'register_dlls.cmd CMTSQLSVR04\DEV01 DQS'
    [4/15/2015 8:41:12 AM] .  Trying to connect using Windows Authentication and db name...
    [4/15/2015 8:41:12 AM] 
    [4/15/2015 8:41:12 AM]  --> Running File: drop_all_assemblies.sql
    [4/15/2015 8:41:12 AM] ---[ Dropping all SSDQS Executable Objects ]---
    [4/15/2015 8:41:12 AM] 
    [4/15/2015 8:41:12 AM]  --> Drop all SSDQS Types
    [4/15/2015 8:41:12 AM] 
    [4/15/2015 8:41:12 AM]  --> Drop all SSDQS Assemblies
    [4/15/2015 8:41:12 AM] 
    [4/15/2015 8:41:12 AM]  --> Drop all SSDQS Schemas
    [4/15/2015 8:41:12 AM] 
    [4/15/2015 8:41:12 AM]  --> Drop all CLR Assemblies
    [4/15/2015 8:41:12 AM] 
    [4/15/2015 8:41:12 AM]  --> Drop DQ startup stored procedure DQInitDQS_MAIN
    [4/15/2015 8:41:12 AM] Changed database context to 'master'.
    [4/15/2015 8:41:12 AM] 
    [4/15/2015 8:41:12 AM]  --> Running File: drop_service_broker_objects.sql
    [4/15/2015 8:41:12 AM] ---[ Dropping all SSDQS Service Broker Objects ]---
    [4/15/2015 8:41:12 AM] Changed database context to 'DQS_MAIN'.
    [4/15/2015 8:41:12 AM] Dropping Service Broker Services.
    [4/15/2015 8:41:12 AM] Dropping Service Broker Queues.
    [4/15/2015 8:41:12 AM] Dropping Service Broker Contracts.
    [4/15/2015 8:41:12 AM] Dropping Service Broker Messages.
    [4/15/2015 8:41:12 AM] Completed - Service Broker objects dropped.
    [4/15/2015 8:41:12 AM] 
    [4/15/2015 8:41:12 AM]  --> Running register_assemblies.sql
    [4/15/2015 8:41:12 AM] ---[ Registering Assemblies ]---
    [4/15/2015 8:41:12 AM] Changed database context to 'DQS_MAIN'.
    [4/15/2015 8:41:12 AM] 
    [4/15/2015 8:41:12 AM]  --> Registering Assemblies
    [4/15/2015 8:41:12 AM]      The following Warnings are benign to DQSInstaller and may be ignored.
    [4/15/2015 8:41:12 AM] 
    [4/15/2015 8:41:12 AM]      * Register .NET dependency assemblies
    [4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'system.management, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
    and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'system.configuration.install, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted
    environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'system.runtime.serialization, version=4.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted
    environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'smdiagnostics, version=4.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
    and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'system.windows.forms, version=4.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
    and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'system.drawing, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
    and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'accessibility, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
    and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'system.runtime.serialization.formatters.soap, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the
    SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'microsoft.jscript, version=10.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
    and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:26 AM] Warning: The Microsoft .NET Framework assembly 'system.management.instrumentation, version=4.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server
    hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:27 AM] Warning: The Microsoft .NET Framework assembly 'system.messaging, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
    and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:27 AM] Warning: The Microsoft .NET Framework assembly 'system.directoryservices, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted
    environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.enterpriseservices, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=amd64.' you are registering is not fully tested in the SQL Server hosted
    environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.runtime.remoting, version=4.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted
    environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.web, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=amd64.' you are registering is not fully tested in the SQL Server hosted environment
    and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'microsoft.build.framework, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted
    environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.xaml, version=4.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
    and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.runtime.caching, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
    and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'microsoft.build.utilities.v4.0, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server
    hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.directoryservices.protocols, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server
    hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.design, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
    and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.drawing.design, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
    and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.web.regularexpressions, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted
    environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'microsoft.build.tasks.v4.0, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted
    environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.serviceprocess, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
    and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:44 AM]      * Register Microsoft.Practices assemblies
    [4/15/2015 8:41:47 AM] Warning: The Microsoft .NET Framework assembly 'microsoft.csharp, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
    and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:47 AM] Warning: The Microsoft .NET Framework assembly 'system.dynamic, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
    and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
    [4/15/2015 8:41:47 AM] 
    [4/15/2015 8:41:47 AM]      The preceding Warnings are benign to DQSInstaller and may be ignored.
    [4/15/2015 8:41:48 AM] 
    [4/15/2015 8:41:48 AM]  --> Running register_dq_assemblies.sql
    [4/15/2015 8:41:48 AM] ---[  Registering Data Quality assemblies ]---
    [4/15/2015 8:41:49 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.infra, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
    [4/15/2015 8:41:50 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.core, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
    [4/15/2015 8:41:51 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.dataservice, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
    [4/15/2015 8:41:51 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.referencedata, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
    [4/15/2015 8:41:52 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.index, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
    [4/15/2015 8:41:52 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.associationrules, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
    [4/15/2015 8:41:53 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.datavalueservice, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
    [4/15/2015 8:41:54 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.domainrules, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
    [4/15/2015 8:41:54 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.cleansing, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
    [4/15/2015 8:41:55 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.association, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
    [4/15/2015 8:41:55 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.flow, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
    [4/15/2015 8:41:56 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.matching, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
    [4/15/2015 8:41:57 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
    [4/15/2015 8:41:57 AM] Resource file was not copied
    [4/15/2015 8:41:57 AM] 
    [4/15/2015 8:41:57 AM]  --> Running register_assemblies_tsql.sql
    [4/15/2015 8:41:57 AM] ---[ Registering Assemblies for TSQL]---
    [4/15/2015 8:41:57 AM] Changed database context to 'master'.
    [4/15/2015 8:41:57 AM] Changed database context to 'DQS_MAIN'.
    [4/15/2015 8:41:57 AM] 
    [4/15/2015 8:41:57 AM]      * Clear the Code Member Table A_CODE_MEMBER.
    [4/15/2015 8:41:57 AM]
    [4/15/2015 8:41:57 AM] (0 rows affected)
    [4/15/2015 8:41:57 AM] 
    [4/15/2015 8:41:57 AM]      * Clear the Code Group Table A_CODE_GROUP.
    [4/15/2015 8:41:57 AM]
    [4/15/2015 8:41:57 AM] (0 rows affected)
    [4/15/2015 8:41:57 AM] 
    [4/15/2015 8:41:57 AM]      * Register assemblies T-SQL executable objects
    [4/15/2015 8:41:57 AM]         - Creating assemblies T-SQL registeration stored procedure.
    [4/15/2015 8:41:57 AM] 
    [4/15/2015 8:41:57 AM]      * Creating the internal_core schema
    [4/15/2015 8:41:57 AM]         - Registering Microsoft.Ssdqs.Infra T-SQL executable objects.
    [4/15/2015 8:42:05 AM]         - Registering Microsoft.Ssdqs.Core T-SQL executable objects.
    [4/15/2015 8:42:11 AM]         - Registering Microsoft.Ssdqs.DataService T-SQL executable objects.
    [4/15/2015 8:42:16 AM]         - Registering Microsoft.Ssdqs.ReferenceData T-SQL executable objects.
    [4/15/2015 8:42:21 AM]         - Registering Microsoft.Ssdqs.Index T-SQL executable objects.
    [4/15/2015 8:42:26 AM]         - Registering Microsoft.Ssdqs.Cleansing T-SQL executable objects.
    [4/15/2015 8:42:32 AM]         - Registering Microsoft.Ssdqs.Association T-SQL executable objects.
    [4/15/2015 8:42:37 AM]         - Registering Microsoft.Ssdqs.Flow T-SQL executable objects.
    [4/15/2015 8:42:42 AM]         - Registering Microsoft.Ssdqs T-SQL executable objects.
    [4/15/2015 8:42:51 AM]         - Registering Microsoft.Ssdqs.DataValueService T-SQL executable objects.
    [4/15/2015 8:42:56 AM]         - Registering Microsoft.Ssdqs.DomainRules T-SQL executable objects.
    [4/15/2015 8:43:01 AM]         - Registering Microsoft.Ssdqs.AssociationRules T-SQL executable objects.
    [4/15/2015 8:43:06 AM]         - Registering Microsoft.Ssdqs.Matching T-SQL executable objects.
    [4/15/2015 8:43:12 AM]         - Creating refresh assemblies stored procedure.
    [4/15/2015 8:43:12 AM] Changed database context to 'master'.
    [4/15/2015 8:43:12 AM]         - Creating refresh assemblies helper linked server.
    [4/15/2015 8:43:12 AM]         - Creating and registering [dbo].[DQInitDQS_MAIN] (calls internal_core.InitServer) as startup stored procedure.
    [4/15/2015 8:43:12 AM] 
    [4/15/2015 8:43:12 AM]  --> Running File: create_service_broker_objects.sql
    [4/15/2015 8:43:12 AM] ---[ Registering Service Broker Objects ]---
    [4/15/2015 8:43:12 AM] Changed database context to 'DQS_MAIN'.
    [4/15/2015 8:43:12 AM]         - Creating SB dispatcher stored procedure, messages and contract
    [4/15/2015 8:43:13 AM]         - Creating parallel execution SB queues and services
    [4/15/2015 8:43:13 AM]         - Creating calibration SB queues and services
    [4/15/2015 8:43:13 AM]         - Creating parallel calibration SB queues and services
    [4/15/2015 8:43:13 AM]
    [4/15/2015 8:43:13 AM]
    [4/15/2015 8:43:13 AM] Successfully registered all assemblies.
    [4/15/2015 8:43:13 AM]
    [4/15/2015 8:43:13 AM]
    [4/15/2015 8:43:13 AM] Action 'Register data quality assemblies and stored procedures' finished successfully.
    [4/15/2015 8:43:13 AM] Executing action: Set product version property.
    [4/15/2015 8:43:13 AM] Action 'Set product version property' finished successfully.
    [4/15/2015 8:43:13 AM] Executing action: Create MDS user (if MDS login exists).
    [4/15/2015 8:43:13 AM] Action 'Create MDS user (if MDS login exists)' finished successfully.
    [4/15/2015 8:43:13 AM] Executing action: Load out of the box data.
    [4/15/2015 8:43:22 AM] Started loading knowledgebase 'DQS Data'
    [4/15/2015 8:45:04 AM] Starting installation rollback...
    [4/15/2015 8:45:04 AM] Installation rollback completed successfully.
    [4/15/2015 8:45:04 AM] Fatal error while executing the DQS installer.
    Microsoft.Ssdqs.Proxy.ImportExport.ImportExportException: Error occurred in a server proxy call during the import/export process. ---> Microsoft.Ssdqs.Proxy.ImportExport.ImportProcessFailedException: System.NullReferenceException: Object reference not set
    to an instance of an object.
       at System.Security.Cryptography.CryptoStream..ctor(Stream stream, ICryptoTransform transform, CryptoStreamMode mode)
       at Microsoft.Ssdqs.ImportExportManagement.ImportExport.ImportExportReader..ctor(Stream stream)
       at Microsoft.Ssdqs.ImportExportManagement.ImportExport.ImportExportManager.Import(Stream input)
       at Microsoft.Ssdqs.ImportExportManagement.Calibrator.ImportKnowledgebaseCalibrator.Calibrate(IMasterContext masterContext, CalibrationMode calibrationMode, ConfigurationDomParameter calibratorConfiguration)
       at Microsoft.Ssdqs.Core.Service.Calibration.Impl.ExecuteCalibratorFlow.Process(IMasterContext context)
       --- End of inner exception stack trace ---
       at Microsoft.Ssdqs.Proxy.ImportExport.ImportAsProcessManager.WaitUntillProcessCompletes(Int64 processId, Int64 knowledgebaseId, ImportExportCancellationToken cancelToken)
       at Microsoft.Ssdqs.Proxy.ImportExport.ImportAsProcessManager.KnowledgebaseImport(String kbName, String kbDescription, String fileName, ImportExportCancellationToken cancelToken)
       at Microsoft.Ssdqs.DqsInstaller.Logic.Actions.LoadOutOfTheBoxDataAction.Execute()
       at Microsoft.Ssdqs.DqsInstaller.Logic.ActionExecuter.ExecuteAllActions()
       at Microsoft.Ssdqs.DqsInstaller.Logic.Installer.Main(String[] args)
    Microsoft (R) DQS Installer Command Line Tool
    Copyright (c) 2014 Microsoft. All rights reserved.

    Thank you for the quick response.
    Unfortunately running cmd as admin had no effect on the result. Same exact error.
    After the rollback indicated in the log above, only the DQS_STAGING_DATA database remains in the sql server instance.

  • Error in executing ODCIIndexStart() routine

    In my application We have sometimes the follow error:
    Exception [TOPLINK-4002] (OracleAS TopLink - 10g (9.0.4) (Build 031126)): oracle.toplink.exceptions.DatabaseException
    Exception Description: java.sql.SQLException: ORA-29902: error in executing ODCIIndexStart() routine
    ORA-20000: Oracle Text error:
    ORA-00942: table or view does not exist
    Internal Exception: java.sql.SQLException: ORA-29902: error in executing ODCIIndexStart() routine
    ORA-20000: Oracle Text error:
    ORA-00942: table or view does not exist
    Error Code: 29902
    at oracle.toplink.exceptions.DatabaseException.sqlException(DatabaseException.java:226)
    at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:695)
    at oracle.toplink.threetier.ServerSession.executeCall(ServerSession.java:506)
    at oracle.toplink.internal.queryframework.CallQueryMechanism.executeCall(CallQueryMechanism.java:130)
    at oracle.toplink.internal.queryframework.CallQueryMechanism.executeCall(CallQueryMechanism.java:111)
    at oracle.toplink.internal.queryframework.CallQueryMechanism.executeSelectCall(CallQueryMechanism.java:193)
    at oracle.toplink.internal.queryframework.CallQueryMechanism.selectAllRows(CallQueryMechanism.java:563)
    at oracle.toplink.queryframework.ReadAllQuery.execute(ReadAllQuery.java:421)
    at oracle.toplink.queryframework.DatabaseQuery.execute(DatabaseQuery.java:498)
    at oracle.toplink.queryframework.ReadQuery.execute(ReadQuery.java:111)
    at oracle.toplink.publicinterface.Session.internalExecuteQuery(Session.java:1968)
    at oracle.toplink.threetier.ServerSession.internalExecuteQuery(ServerSession.java:629)
    at oracle.toplink.threetier.ClientSession.internalExecuteQuery(ClientSession.java:392)
    at oracle.toplink.publicinterface.Session.executeQuery(Session.java:1096)
    at oracle.toplink.publicinterface.Session.executeQuery(Session.java:1048)
    at oracle.toplink.publicinterface.Session.readAllObjects(Session.java:2416)
    at it.csi.cultura.om.supporto.ObjectManagerFrontoffice.getElencoEventiFiltrati(ObjectManagerFrontoffice.java:1431)
    at it.csi.cultura.backoffice.eventinotizie.ElencoEventi.execute(ElencoEventi.java:125)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:251)
    at oracle.portal.provider.v2.render.http.AbstractResourceRenderer.renderBody(Unknown Source)
    at oracle.portal.provider.v2.render.RenderManager.render(Unknown Source)
    at it.csi.cultura.portal.CustomPortletInstance.render(CustomPortletInstance.java:46)
    at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.showPortlet(Unknown Source)
    at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.handleHttp(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at oracle.webdb.provider.v2.adapter.SOAPServlet.doHTTPCall(Unknown Source)
    at oracle.webdb.provider.v2.adapter.SOAPServlet.service(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
    at it.csi.cultura.portal.UploadFilter.doFilter(UploadFilter.java:61)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
    at java.lang.Thread.run(Thread.java:534)
    Have you any idea???
    Thanks

    Hi,
    A couple of thoughts:
    1. Have you asked in the Oracle Text forum?
    Text
    2. On which text index does this command fail? Have you checked to make sure this text index really does exist?
    Cheers,
    Colin
    PS The singular of 'Indices' is 'Index'.

  • Error while executing BexQuery

    Hi all,
    I am getting the following error while executing a Bex Query.
    SQL Error:  16
    SQL Error: 0
    Error while reading data; navigation is possible
    Can you let me know of any inputs regarding the same ?
    Regards
    Snehith.

    hi snehith,
    Check whether your infoprovider on which this query is build contains invalid Chars.
    thanks

  • Error when executing a .irpt page

    Hi,
    I am getting the below error when executing a .irpt from the workbench. I am on MII 12.2.2 Build (235).
    404   Not Found
    SAP NetWeaver Application Server 7.20 / AS Java 7.30
    Error: S:usrsapALXJ10j2eeclusterappssap.comxappsxmiiearservlet_jspXMII
    oot/XMII/CM/<Project>/<File.irpt>
    Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jstsg/home
    Details: No details available.
    Please share your thoughts on this.
    Regards,
    Chanti.

    Hi Chanti,
    This sounds obvious, but check to make sure your irpt page has the extension .irpt in the workbench.  Depending on how you saved it, it might have been dropped.
    Also make sure the page is published by either saving it to web:// (not db://) or by right clicking and selecting Publish.
    Regards,
    Mike

  • XOQ-01600: OLAP DML error while executing DML "SYS.AWXML!R11_LOAD_DIM"

    hi all,
    I am trying to do the tutorial Building OLAP 11g Cubes (http://st-curriculum.oracle.com/obe/db/11g/r1/olap/cube/buildicubes.htm), but when I try to "Maintain Cube SALES_CUBE" I get the following error:
    An error has occurred on the server
    Error class: Express Failure
    Server error descriptions:
    INI: error creating a definition manager, Generic at TxsOqConnection::generic<BuildProcess>
    INI: ORA-35571: The maximum number of load errors has occurred. No changes from this step were committed to the database.
    XOQ-01600: OLAP DML error while executing DML "SYS.AWXML!R11_LOAD_DIM", Generic at TxsOqStdFormCommand::execute
    INI: XOQ-01601: error while loading data for Cube Dimension "OLAPTRAIN.PRODUCT" into the analytic workspace, Generic at TxsOqStdFormCommand::callR11LoadDim
    at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
    at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
    at oracle.olapi.data.source.DataProvider.executeBuild(Unknown Source)
    at oracle.olap.awm.wizard.awbuild.UBuildWizardHelper$2.construct(Unknown Source)
    at oracle.olap.awm.ui.SwingWorker$2.run(Unknown Source)
    at java.lang.Thread.run(Thread.java:662)
    Can anyone help me?
    Thanks,
    Carlos

    I have seen this (in 11.1.0.7, I believe) when the metadata cache ("kgl") gets out of synch with the data dictionary. Specifically there is a flag that determines if prefixes get added to dimension members ("use surrogates" in AWM terms) that becomes false instead of true. If you look at the generated SQL in the OUTPUT column of the CUBE_BUILD_LOG you may find that sometimes a prefix is added to dimension members (e.g. "LEAF_LEVEL_" || dim_table.leaf_column) and othertimes it is not (e.g. just dim_table.leaf_column). A workaround if this is the case may be to execute the following (as dba) before building the dimension.
    alter system flush shared_pool;

  • Error Building BPEL Process

    Hi,
    When we build the test task in BPEL Process, it give error as
    [bpeltest] <Line 39, Column 173>: XML-22016: (Error) Extension function namespa
    ce should start with 'http://www.oracle.com/XSL/Transform/java/'.
    Even then it displays a message as
    [echo]
    [echo] --------------------------------------------------------------
    [echo] Executed 1 test(s) for DistributionManager (v.1.0) with 0 failure(s)
    [echo] --------------------------------------------------------------
    [echo]
    When we check the DistributionManager.properties files
    test.total.count=1
    test.failure.count=0
    When it tries to generate the Test Report, we get the following error,
    BUILD FAILED
    D:\FCE\Project\07-12-07\ManagedProductProcess\DistributionManager\build.xml:200:
    Could not find a valid processor version implementation from oracle.xml.jaxp.JX
    SAXTransformerFactory
    There are no file generated with in the DistributionManager\xml\DistributionManager folder. (DistributionManager is the Project Name and same is provided for Test Suite Name).
    TESTS-TestSuites.xml generated with in
    <?xml version="1.0" encoding="UTF-8" ?>
    <testsuites></testsuites>
    We are in critical situation for delivery, Can you help us to resolve this immediately ?
    Action taken:
    1. Downloaded the xalan-j_2_7_1
    2. Included all jar files of xalan-j_2_7_1 to ClassPath (this process didn't helped us for the deployment)
    3. Copied the xalan-j_2_7_1 jar files to C:\product\10.1.3.1\OracleAS_1\j2ee\home\lib (this process didn't helped us for the deployment)

    Hi,
    Try to put this lib in applib directory. Restart your oc4j.
    Afonso

  • CommonSearchParseException: Error building query, common name {0} specified

    Hi,
    I have installed Content Server and I have setup CIS on Oracle OC4J standalone. I have also validated the configuration by the action "Validate communication with Oracle Content Server".
    I tried to execute the sample program CommonSearch from SDK.
    The program is taking a default query as "$author <substring> 'Adm'" and default metadata map from /resources/ucpmcommon-metamap-default.xml ]
    But I got the following error:
    CommonSearchParseException: Error building query, common name {0} specified but is not mapped.
    at com.stellent.cis.client.command.impl.services.CommandExecutorService.executeCommand(CommandExecutorService.java:62)
         at com.stellent.cis.client.command.impl.CommandFacade.executeCommand(CommandFacade.java:158)
         at com.stellent.cis.client.command.impl.BaseCommandAPI.invokeCommand(BaseCommandAPI.java:84)
         at com.stellent.cis.client.api.common.search.impl.CISSearchAPI.search(CISSearchAPI.java:59)
         at com.stellent.cis.sdk.samples.search.CommonSearch.execute(CommonSearch.java:78)
    I have configured the adapterconfig.xml matching the CIS adapter config in OC4J as given below:
    <?xml version="1.0" ?>
    <config>
         <adapter type="scs" default="true" name="myadapter">
              <config>
    <property name="port">4444</property>
    <property name="host">localhost</property>
    <property name="type">web</property>
    <property name="contentServerAdminID">sysadmin</property>
    <property name="contentServerAdminPassword">idc</property>
              </config>
              <beans template="classpath:/META-INF/resources/adapter/adapter-services-scs.jxml"/>
         </adapter>
    </config>
    My metada map is the default mapping as follows
    <metamap>
    <adapter name="scsadapter">
    <common>
    <map name="Title" native="dDocTitle" />
    <map name="Author" native="dDocAuthor" />
    <map name="Date" native="dInDate" />
    <map name="ID" native="dID" />
    </common>
    <contribution>
    <!-- native fields are used only for contribution -->
    <native name="comments" default="" override="true" />
    <!-- common fields refer back to common map, can also be tagged with default and override attributes -->
    <common name="title" />
    <common name="author" />
    </contribution>
    </adapter>
    </metamap>
    When is this error "common name {0} specified but is not mapped" thrown? Is my metadata map file correct?
    Thanks
    Raji

    Hi,
    I changed the query and executed the program, still getting the same error. I have followed the instructions in CIS developer guide to create the metamap file but unable to figure out the reason for the error. Any other suggestions?
    Thanks
    Raji

  • CMDTUX_CAT:512: ERROR: Cannot execute C compiler cc   -I$TUXDIR/include ...

    Hello Tuxedo Experts,
    I am building the Tuxedo client (on AIX 6.1) using the buildclient command given in README file of simpapp sample (that comes with Tuxedo installation), but I am getting an error on running the command.
    Command is: /home/sibusr/tuxedo11gR1/bin/buildclient -o simpcl -f simpcl.c
    Error is:
    =====================
    $ /home/sibusr/tuxedo11gR1/bin/buildclient -o simpcl -f simpcl.c
    sh: cc: not found.
    CMDTUX_CAT:512: ERROR: Cannot execute C compiler cc -I$TUXDIR/include -o simpcl -qstaticinline -qrtti=all -L${TUXDIR}/lib simpcl.c -brtl $TUXDIR/lib/tpinit.o -ltux -lbuft -lfml -lfml32 -lengine -lpthread
    $
    =====================
    Would you please help resolve the issue.
    Thanks & Regards,
    Ahsan

    Hi Todd/Tuxedo Experts,
    I have finally been able to install XLC successfully after a lot of effort :)
    I am compiling the simpcl.c from "<Tuxedo Home directory>/samples/atmi/simpapp" path, using " /usr/vacpp/bin/xlC -I /home/sibusr/tuxedo11gR1/include /home/sibusr/tuxedo11gR1/lib/tpinit.o simpcl.c" command, but I am getting the following error:
    =============================================
    ld: 0711-317 ERROR: Undefined symbol: ._tmsettypesw
    ld: 0711-317 ERROR: Undefined symbol: xa_switchp
    ld: 0711-317 ERROR: Undefined symbol: ._tmsetxaswitch
    ld: 0711-317 ERROR: Undefined symbol: ._tpinit
    ld: 0711-317 ERROR: Undefined symbol: .tpalloc
    ld: 0711-317 ERROR: Undefined symbol: .tpterm
    ld: 0711-317 ERROR: Undefined symbol: .tpfree
    ld: 0711-317 ERROR: Undefined symbol: .tpcall
    ld: 0711-317 ERROR: Undefined symbol: ._tmget_tperrno_addr
    ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
    =============================================
    Would you please guide what could be wrong with my compilation command or any settings.
    Thanks a lot for all the help.
    Awais Hassan

  • Language Problem when building executable

    I'm having a weird issue when building executables.  Labview seems to forget the english language.  I have tried selecting English exclusively as the run time language but when i do that i get a "No supported languages installed!" error. Everthing works fine in the development environment.  It only seems to apply to application menus and not custom user menus.  Thanks for any insight.  
    Solved!
    Go to Solution.
    Attachments:
    Language.png ‏3 KB

    Hello Jed394,
    I took a look into the issue, just to be sure the error thrown was “No support Language Installed,” correct?  Check to see if the language of your operating system and the language LabVIEW is using is English.  If these are both English, then it looks like this is an error due to installation issues in the run-time engine.  Try to perform a repair by going through the install menu of LabVIEW.  The following link will help you with the repair: http://digital.ni.com/public.nsf/allkb/FE6B641E86E55AF2862576DE00038001?OpenDocument
    If you have any further issues, please let me know. Thanks!
    Matt S.
    Industrial Communications Product Support Engineer
    National Instruments

Maybe you are looking for

  • Oracle 10G DB and HP XP24000

    We are using oracle 10G DB for our Banking application, can anybody advise what is the oracle recomended Raid configuration in XP24000. If any best practice document pls attache the link.

  • Is it possile to attach a name to a BEGIN..END execution block ?

    DB version:10gR2 In one of our badly coded and badly indented stored proc there are several BEGIN..END blocks within a main BEGIN..END block. Is it possible to name a BEGIN...END execution block for readability purpose?

  • Routing unit of measure conversion

    Dear guru , I have a different unit of measure for one operation of my routing. Which is the problem if I maintain relation 1 to 1 in the routing unit of measure conversion ? Thanks.

  • CUCM 7.1.5 - Cannot do a blind transfer to an external number

    Hi, I have CUCM 7.0 at my office and I can actually dial an external number and while hearing ringing I can transfer the call to an extension before the external party answers. Now at a customer, fresh implementation, the transfer softkey is grayed o

  • Eclipse 3.3 on Fedora 7

    Just sharing that was able to move from the windows copy of Flex builder I had modified to work with Eclipse on linux to the linux version of FB with no trouble. The Ant scripts worked to compile flex apps too! I also compiled my app for air and was