Error: Cannot extend package

Hi All,
I created a package with SE80 and tried to save 'Z' prgram in it but it gave an error Cannot extend package <PACKAGE NAME>..
Can anyone please help me out on this.

HI as Sandra suggested, this question could easily be found.
[Cannot Extend Package;

Similar Messages

Cannot extend package Error while saving changes in Query

Dear Gurus
When i am trying to save changes made in the query i get an error message Cannot extend package YBW. kindly help me in resolving this as the changes are required in multiple queries.

thanks for your relpy Jaya..i checked the properties...the check box package not extendable check box is unchecked and the main package checkbox is also unchecked.
i check the below post...not exactly related to my issue
creation of package(Package can not be extended)
Edited by: SAP Learner license on Mar 30, 2011 9:16 AM

Cannot extend package in ABAP 7.1 (new installation)

Hi everybody,
sorry for this question, but how can i extend a package in ABAP 7.1. I have created a structure package (ZSP_Test). In this package i try to create a program but without success. I get the message: Cannot extend package ZSP_TEST.
My Package Properties:
- allow adding new objects: (is disabled, read only)
- Type of Package: Package
- superpackage:
- Encapsulation level: Not encapsulated
- Alias for enhancement:
- Dependency Control list: Checked
- Allow Enhancement: Checked
regards,
Sid
Edited by: Sid on Nov 6, 2009 6:01 PM

Sid,
congratulations you are on 7.1 - I am not yet. As far as I understand the package concept, you must have everything in the package interface, what you want to use but do not define in the package.
Look at any existing standard packages: Probably they have something very basic in the interface that will allow you to create a program and use some basic statements.
At least thats what I exspect to be the reason for your error.
Regards,
Clemens

Cannot extend package in PI 7.1 (new installation)

Hi everybody,
sorry for this question, but how can i extend a package in PI 7.1. I have created a package ZSP_Test. In this package i try to create a program but without success. I get the message: Cannot extend package ZSP_TEST.
My Package Properties:
allow adding new objects: (is disabled, read only)
Type of Package: Package
superpackage:
Encapsulation level: Not encapsulated
Alias for enhancement:
Dependency Control list: Checked
Allow Enhancement: Checked
regards,
Sid

Do you have SAI_TOOLS, SAPINT added in your use-access tab??
Look at Tips for Genrating ABAP Proxies
http://help.sap.com/saphelp_nw04/helpdata/en/2b/f49b21674e8c44940bb3beafd83d5c/frameset.htm
How to add SAI_TOOLS Package for ABAP Proxy
How to add SAI_TOOLS Package for ABAP Proxy
Regads,
Siva Maranani

[SOLVED] pacman error: cannot open package file

Hi
I didn't use my Arch box for a while and today launched it.
I had to install the "p7zip" package, but I'm a "build everything from sources" guy and I tried to install it from source as always. Unsuccessfully: it required nasm.
Decided to install it using pacman, to get it done quickly.
So, I've got the nasm package and uploaded it to my Arch machine (it has no inernet connection, I use NFS to share files).
Executed
pacman -U ./nasm-2.09.10-1-i686.pkg.tar.xz
and for my surprise I've got:
loading package data...
error: './nasm-2.09.10-1-i686.pkg.tar.xz': cannot open package file
Then I tried to run pacman -U for one of "core" packages from the original media (2010.05) and the same result. Some time ago it was working fine.
It gets this error for every file.
The tar.gz file is not broken, I can browse it within Midnigh Commander and get any file .
What could be wrong? Any ideas?
Last edited by art84 (2011-09-16 17:37:33)

@Techman084:
Of course I have ran it in the directory where the package is located. And yes, I also tried to use it with an absolute path like.
@karol
# pacman -V
.--. Pacman v3.3.3 - libalpm v4.0.3
/ _.-' .-. .-. .-. Copyright (C) 2006-2009 Pacman Development Team
\ '-. '-' '-' '-' Copyright (C) 2002-2006 Judd Vinet
This program may be freely redistributed under
the terms of the GNU General Public License.
@the sad clown
1. /var/log/pacman.log
[2010-12-12 13:46] installed kernel26-headers (2.6.33.4-1)
[2010-12-12 14:07] installed r8168 (8.020.00-1)
[2010-12-20 19:33] installed iperf (2.0.5-1)
[2010-12-26 14:46] installed slang (2.2.3-1)
[2010-12-26 15:45] installed mc (4.7.4-1)
2. Why to synchronize? And how? pacman -Syu ?
I have the original 2010.05 distro installed without any updates. Only console. A few packages installed: ethtool, mc, slang, etc. So, I don't need to have it synchronized to the last versions of everythig (if I correctly understood the goal of the sync)
3. I have already that p7zip package on my PC I had to do it manually ... but to be clear, it doesn't work with any package, not only with "p7zip" or "nasm"

Error "Cannot be resolved to a type" on OwnerPIN, APDU, ISO7816

The error I'm reffering to might clearify the fact that I'm new at Java/javaCard-development.
To learn how it all works I've downloaded an example and try to understand what happens.
I opened the source in Eclipse and get errors "Cannot be resolved to a type" on OwnerPIN, ADPU and ISO7816 classes. I have an Import javacard.framework statement and expected these types to be part of this library.
I guess I'm forgetting something somewhere but couldn't find the soluiton on internet.
import javacard.framework.*; // import all neccessary packages for java card*
import java.applet.;
import java.lang.Object;
public class classpgdata extends Applet {
final static byte PROP_CLASS = (byte) 0x80; // Class of the proprietary APDU commands
static {color:#ff0000}OwnerPIN{color} pin; // the PIN object
public void process({color:#ff0000}APDU{color} apdu) {
byte[] cmd_apdu = apdu.getBuffer();
if (cmd_apdu[{color:#ff0000}ISO7816{color}.OFFSET_CLA] == {color:#ff0000}ISO7816{color}.CLA_ISO7816) {
//----- it is the ISO/IEC 7816 class
switch(cmd_apdu[{color:#ff0000}ISO7816{color}.OFFSET_INS]) { // check the instruction byte
case INS_SELECT: // it is a SELECT FILE instruction
...

Hi,
What you need to do update your Java build path fr the project in your Eclipse project.
Project -> Properties then find Java Build Path.
In the Libraries tab add the {JCDK Home}/lib/javacardframework.jar by clicking the add external JARs button. You may also want to remove the standard Java Runtime (JRE) libraries as you do not build against these.
If you want to use the JC 2.2.1 CAP file converter, you may also want to ensure that the Eclipse compiler is set to compile as Java 1.3 in the Java Compiler section of the project properties.
KeesdeVink wrote:
import javacard.framework.*; // import all neccessary packages for java card
import java.applet.*;
import java.lang.Object;
It also looks like you have added two imports you don't actually want. You only need the javacard.framework.* import.
Cheers,
Shane
Edited by: safarmer on 23/09/2009 08:00

Error: cannot find symbol implements..

I have an interface and I'm trying to implement.
package data_structures;
public interface ListADT<E> extends Iterable<E> {
//Method Signatures
and
package data_structures;
public class LinkedListDS<E> implements ListADT<E> {
//Code
And when I try to compile the class I get
LinkedListDS.java:3 error: cannot find symbol
public class LinkedListDS<E> implements ListADT<E> {
____________________________________^
symbol: class ListADT
And I'm not really sure what I'm doing wrong here or what exactly Java wants me to do to correct this error.

What are you using to compile? If the command line, and not an IDE which will do this for you, then compile the interface, first.

Gettin error Cannot convert to number in RTF Template

Hi,
I am working on xml template development i am getting the followinf error
Font Dir: C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\fonts
Run XDO Start
RTFProcessor setLocale: en-us
FOProcessor setData: D:\Tickets\Remittance Advice XMLP\canada_report1.xml
FOProcessor setLocale: en-us
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:586)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:383)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:201)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:161)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1015)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:968)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:209)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1561)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:951)
     at RTF2PDF.runRTFto(RTF2PDF.java:626)
     at RTF2PDF.runXDO(RTF2PDF.java:460)
     at RTF2PDF.main(RTF2PDF.java:251)
Caused by: oracle.xdo.parser.v2.XPathException: Cannot convert to number.
     at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1526)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:517)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:485)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:264)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:150)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:187)
     ... 16 more
I have checked the code and problem was due to following code i dont know where i went wrong
<xsl:variable xdofo:ctx="incontext" name="inner_group" select=".//G_SEL_INV_DATA"/><?for-each:$inner_group?><?if:(position()-1) mod $no_of_lines_per_page=0?><xsl:variable name="first_rec" xdofo:ctx="incontext" select="position()"/>
Please help me to solve this issue...
Thanks
Rajesh

What was the problem in the template? I am facing the same error, when I put a conditional in the data field, it throws the XML-22036: (Error) Cannot convert to number.
error, where if the element was printed directly it works fine.
error
<Line 984, Column 130>: XML-22036: (Error) Cannot convert to number.
@Line 984 ==> <xsl:variable name="v148" select="format-number(string(xdoxslt:one($v147)), string('###0.00'), string('_DECIMALFORMAT'))"/>
End of Process.
<format>
Number, ###0.00
<DATA >BROKEN
If (to_number(../DocumentPayableCount) + to_number(Extend/NumberOfPO) + sum(to_number(../DocumentPayable/Extend/Commentlength))) <= 7 then Extend/InvoiceAmount end if
<DATA >ALSO BROKEN
If (../DocumentPayableCount + Extend/NumberOfPO + sum(../DocumentPayable/Extend/Commentlength)) <= 7 then Extend/InvoiceAmount end if
<DATA> WORKS
then Extend/InvoiceAmount

[SOLVED] configure: error: cannot run C compiled programs

I'm trying to build lib32-libxkbcommon 0.5.0-1 from AUR with makepkg. I already tried installing pacman (setting the default makepkg.conf) and multilib-devel with no luck.
makepkg messages:
==> Making package: lib32-libxkbcommon 0.5.0-1 (Mon May 11 00:17:05 EEST 2015)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found libxkbcommon-0.5.0.tar.xz
==> Validating source files with sha256sums...
libxkbcommon-0.5.0.tar.xz ... Passed
==> Extracting sources...
-> Extracting libxkbcommon-0.5.0.tar.xz with bsdtar
bsdtar: Failed to set default locale
==> Starting prepare()...
==> Removing existing $pkgdir/ directory...
==> Starting build()...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for style of include used by make... GNU
checking for gcc... gcc -m32
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... configure: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
==> ERROR: A failure occurred in build().
Aborting...
makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync --no-motd -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
#-- The package required by makepkg to download VCS sources
# Format: 'protocol::package'
VCSCLIENTS=('bzr::bzr'
'git::git'
'hg::mercurial'
'svn::subversion')
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CPPFLAGS="-D_FORTIFY_SOURCE=2"
CFLAGS="-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4"
CXXFLAGS="${CFLAGS}"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j5"
#-- Debugging flags
DEBUG_CFLAGS="-g -fvar-tracking-assignments"
DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(!distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(!distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- staticlibs: Leave static library (.a) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
#-- debug: Add debugging flags as specified in DEBUG_* variables
OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Log files: specify a fixed directory where all log files will be placed
#LOGDEST=/home/makepkglogs
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# COMPRESSION DEFAULTS
COMPRESSGZ=(gzip -c -f -n)
COMPRESSBZ2=(bzip2 -c -f)
COMPRESSXZ=(xz -c -z -)
COMPRESSLRZ=(lrzip -q)
COMPRESSLZO=(lzop -q)
COMPRESSZ=(compress -c -f)
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
config.log:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by libxkbcommon configure 0.5.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/usr --libdir=/usr/lib32 --disable-docs --disable-static
## Platform. ##
hostname = Arch
uname -m = x86_64
uname -r = 4.0.1-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /usr/lib/jvm/default/bin
PATH: /usr/bin/site_perl
PATH: /usr/bin/vendor_perl
PATH: /usr/bin/core_perl
## Core tests. ##
configure:2424: checking for a BSD-compatible install
configure:2492: result: /usr/bin/install -c
configure:2503: checking whether build environment is sane
configure:2558: result: yes
configure:2709: checking for a thread-safe mkdir -p
configure:2748: result: /usr/bin/mkdir -p
configure:2755: checking for gawk
configure:2771: found /usr/bin/gawk
configure:2782: result: gawk
configure:2793: checking whether make sets $(MAKE)
configure:2815: result: yes
configure:2844: checking whether make supports nested variables
configure:2861: result: yes
configure:2987: checking whether to enable maintainer-specific portions of Makefiles
configure:2996: result: yes
configure:3023: checking for style of include used by make
configure:3051: result: GNU
configure:3122: checking for gcc
configure:3149: result: gcc -m32
configure:3378: checking for C compiler version
configure:3387: gcc -m32 --version >&5
gcc (GCC) 5.1.0
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3398: $? = 0
configure:3387: gcc -m32 -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/5.1.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/gcc-multilib/src/gcc-5-20150505/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --enable-libmpx --with-system-zlib --with-isl --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --disable-libssp --enable-gnu-unique-object --enable-linker-build-id --enable-lto --enable-plugin --enable-install-libiberty --with-linker-hash-style=gnu --enable-gnu-indirect-function --enable-multilib --disable-werror --enable-checking=release --with-default-libstdcxx-abi=c++98
Thread model: posix
gcc version 5.1.0 (GCC)
configure:3398: $? = 0
configure:3387: gcc -m32 -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3387: gcc -m32 -qversion >&5
gcc: error: unrecognized command line option '-qversion'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3418: checking whether the C compiler works
configure:3440: gcc -m32 -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3444: $? = 0
configure:3492: result: yes
configure:3495: checking for C compiler default output file name
configure:3497: result: a.out
configure:3503: checking for suffix of executables
configure:3510: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3514: $? = 0
configure:3536: result:
configure:3558: checking whether we are cross compiling
configure:3566: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
In file included from /usr/include/stdio.h:27:0,
from conftest.c:11:
/usr/include/features.h:365:25: fatal error: sys/cdefs.h: No such file or directory
compilation terminated.
configure:3570: $? = 1
configure:3577: ./conftest
./configure: line 3579: ./conftest: No such file or directory
configure:3581: $? = 127
configure:3588: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure:3590: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
## Cache variables. ##
ac_cv_env_CC_set=set
ac_cv_env_CC_value='gcc -m32'
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
ac_cv_env_CPPFLAGS_set=set
ac_cv_env_CPPFLAGS_value=-D_FORTIFY_SOURCE=2
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_DOT_set=
ac_cv_env_DOT_value=
ac_cv_env_DOXYGEN_set=
ac_cv_env_DOXYGEN_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-Wl,-O1,--sort-common,--as-needed,-z,relro
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_LIBDIR_set=
ac_cv_env_PKG_CONFIG_LIBDIR_value=
ac_cv_env_PKG_CONFIG_PATH_set=set
ac_cv_env_PKG_CONFIG_PATH_value=/usr/lib32/pkgconfig
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_XCB_XKB_CFLAGS_set=
ac_cv_env_XCB_XKB_CFLAGS_value=
ac_cv_env_XCB_XKB_LIBS_set=
ac_cv_env_XCB_XKB_LIBS_value=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_set=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_value=
ac_cv_env_YACC_set=
ac_cv_env_YACC_value=
ac_cv_env_YFLAGS_set=
ac_cv_env_YFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/usr/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_ac_ct_CC='gcc -m32'
ac_cv_prog_make_make_set=yes
am_cv_make_support_nested_variables=yes
## Output variables. ##
ACLOCAL='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing aclocal-1.14'
ADMIN_MAN_DIR=''
ADMIN_MAN_SUFFIX=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='1'
AM_V='$(V)'
APP_MAN_DIR=''
APP_MAN_SUFFIX=''
AR=''
AUTOCONF='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoconf'
AUTOHEADER='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoheader'
AUTOMAKE='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing automake-1.14'
AWK='gawk'
BASE_CFLAGS=''
BUILD_LINUX_TESTS_FALSE=''
BUILD_LINUX_TESTS_TRUE=''
CC='gcc -m32'
CCDEPMODE=''
CFLAGS='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
CHANGELOG_CMD=''
CPP=''
CPPFLAGS='-D_FORTIFY_SOURCE=2'
CWARNFLAGS=''
CYGPATH_W='echo'
DEFS=''
DEPDIR='.deps'
DLLTOOL=''
DOT=''
DOXYGEN=''
DRIVER_MAN_DIR=''
DRIVER_MAN_SUFFIX=''
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ENABLE_DOCS_FALSE=''
ENABLE_DOCS_TRUE=''
ENABLE_X11_FALSE=''
ENABLE_X11_TRUE=''
EXEEXT=''
FGREP=''
FILE_MAN_DIR=''
FILE_MAN_SUFFIX=''
GREP=''
HAVE_DOT=''
HAVE_DOT_FALSE=''
HAVE_DOT_TRUE=''
HAVE_DOXYGEN_FALSE=''
HAVE_DOXYGEN_TRUE=''
HAVE_NO_UNDEFINED_FALSE=''
HAVE_NO_UNDEFINED_TRUE=''
INSTALL_CMD=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LD=''
LDFLAGS='-Wl,-O1,--sort-common,--as-needed,-z,relro'
LIBOBJS=''
LIBS=''
LIBTOOL=''
LIB_MAN_DIR=''
LIB_MAN_SUFFIX=''
LIPO=''
LN_S=''
LTLIBOBJS=''
MAINT=''
MAINTAINER_MODE_FALSE='#'
MAINTAINER_MODE_TRUE=''
MAKEINFO='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing makeinfo'
MANIFEST_TOOL=''
MAN_SUBSTS=''
MISC_MAN_DIR=''
MISC_MAN_SUFFIX=''
MKDIR_P='/usr/bin/mkdir -p'
NM=''
NMEDIT=''
OBJDUMP=''
OBJEXT=''
OTOOL64=''
OTOOL=''
PACKAGE='libxkbcommon'
PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon'
PACKAGE_NAME='libxkbcommon'
PACKAGE_STRING='libxkbcommon 0.5.0'
PACKAGE_TARNAME='libxkbcommon'
PACKAGE_URL='http://xkbcommon.org'
PACKAGE_VERSION='0.5.0'
PATH_SEPARATOR=':'
PKG_CONFIG=''
PKG_CONFIG_LIBDIR=''
PKG_CONFIG_PATH='/usr/lib32/pkgconfig'
RANLIB=''
RT_LIBS=''
SED=''
SET_MAKE=''
SHELL='/bin/sh'
STRICT_CFLAGS=''
STRIP=''
VERSION='0.5.0'
XCB_XKB_CFLAGS=''
XCB_XKB_LIBS=''
XKBCONFIGROOT=''
XLOCALEDIR=''
XORG_MALLOC_DEBUG_ENV=''
XORG_MAN_PAGE=''
YACC=''
YACC_INST=''
YFLAGS=''
ac_ct_AR=''
ac_ct_CC='gcc -m32'
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/install-sh'
libdir='/usr/lib32'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## confdefs.h. ##
/* confdefs.h */
#define PACKAGE_NAME "libxkbcommon"
#define PACKAGE_TARNAME "libxkbcommon"
#define PACKAGE_VERSION "0.5.0"
#define PACKAGE_STRING "libxkbcommon 0.5.0"
#define PACKAGE_BUGREPORT "[url]https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon[/url]"
#define PACKAGE_URL "[url]http://xkbcommon.org[/url]"
#define PACKAGE "libxkbcommon"
#define VERSION "0.5.0"
configure: exit 1
other info:
core/pacman 4.2.1-1
multilib/gcc-multilib 4.9.2-4 (multilib-devel) [installed]
The GNU Compiler Collection - C and C++ frontends for multilib
multilib/lib32-fakeroot 1.20.2-1 (multilib-devel) [installed]
Tool for simulating superuser privileges (32-bit)
multilib/lib32-libltdl 2.4.5-1 (multilib-devel) [installed]
A generic library support script (32-bit)
Last edited by tsester (2015-05-10 22:10:28)

tsester wrote:P.S.: I recently transfered the linux system between failing disks
In that case you should probably check that no other packages are missing files with
pacman -Qkk 2>&1 | grep "No such file or directory"
Any packages that report that they're missing files, you should reinstall.

Oracle R Enterprise installation ERROR: cannot copy dll file

This is bit strange, I posted this message in 2 forums but surprisingly can't find it anymore!! Anyways, I would appreciate if anyone can help me a bit on this issue:
I am having trouble installing ORE 1.3 on my windows 7 (home premium, personal notebook) 64 bit. I strictly followed the installation note and made sure all the path variables are defined properly. My R version is 2.15.1. My Windows user is a member of ora_dba group as can be seen below.
C:\Users\sourabh>net localgroup ora_dba
Alias name        ora_dba
Comment         Oracle DBA Group
Members
NT AUTHORITY\SYSTEM
sourabh
The command completed successfully.Now when I try to install.bat (bare with me as I try to include the whole path as I believe there may be the problem. Note that my oracle and R installation is in H:\ drive, not in C:\. Can that be an issue about some windows permission? I off-course tried many ways, gave the user full permission, but no luck.)
C:Users\sourabh>H:\ORACLE\OracleREnterprise\ORE\ore-server-win-x86_64-1.3\server\install.bat
Oracle R Enterprise 1.3 Server Installation.
Copyright (c) 2013, Oracle and/or its affiliates. All rights reserved.
Checking R ...................................
Pass
Checking R libraries ........................
Pass
Checking ORACLE_HOME ...............
Pass
Checking ORACLE_SID ..................
Pass
Checking sqlplus ...........................
Pass
Checking ORE ..............................
Pass
Current configuration
R_HOME            = H:\ORACLE\OracleREnterprise\R\R-2.15.1
R_LIBS_USER     = H:\ORACLE\Oracle11g\product\11.2.0\dbhome\R\library
ORACLE_HOME = H:\ORACLE\Oracle11g\product\11.2.0\dbhome
ORACLE_SID      = SINHA
Do you wish to install ORE? [yes]
Choosomg RQSIS tablespace
PERMANENT tablespace to use for RQSYS [SYSAUX]:
Using default SYSAUX
TEMPORARY tablespace to use for RQSYS [TEMP]:
Using default TEMP
Tablespace summary
PERMANENT tablespace = SYSAUX
TEMPORARY tablespace = TEMP
Installing libraries ..............
Fail
ERROR: cannot copy "rqe.dll" to "H:\ORACLE\Oracle11g\product\11.2.0\dbhome\bin"
C:Users\sourabh>Now here is the default group/user and permissions structures for C:\ and H:\ installation directories on my computer:
C:\program files :
        Group or user names                                    Permissions
        CREATOR OWNER                                          Special Permissions
        SYSTEM                                                 FULL control
        Administrators (Win7\administrators)                   FULL control
        Users (Win7\Users)                                     Read & execute, List folder contents, Read
        TrustedInstaller                                       List folder contents, Special Permissions
H:\%ORACLE_HOME% :
        Group or user names                                    Permissions
        Authenticated Users                                    Special Permissions
        SYSTEM                                                 FULL control
        Administrators (Win7\administrators)                   FULL control                Now noticed that there is no user called sourabh (Win7\Users) or Users (Win7\Users) on H:\, so I created and gave them "Full control" permission before running install script, but still no luck.... Any help please?
Thanks,
Sourabh

Hi all,
I have finally solved the problem, it seems somehow on my windows home premium I can't run the install script (on H:\ ) from the command line. I manually ran the batch script by double clicking on it, it ran fine and I was finally able to install ORE (server + supported + client) on my laptop. Now the connection -- followed through the manual, created user and granted all the roles. Now that I want to test the connection, I open R console and below are the input and output error message though it seems I can connect to the database:
R>
R> library(ORE)
Loading required package: OREbase
Attaching package: ‘OREbase’
The following object(s) are masked from ‘package:base’:
    cbind, data.frame, eval, interaction, order, paste, pmax, pmin, rbind, table
Loading required package: OREstats
Loading required package: MASS
Loading required package: OREgraphics
Loading required package: OREeda
Loading required package: OREdm
Loading required package: lattice
Loading required package: OREpredict
Loading required package: ORExml
R>
R>
R>
R> ore.connect(user = 'scott', sid = 'sinha', host = 'win7', password = 'tiger', port = 1521, all = T)
Error in .oci.GetQuery(conn, statement, data = data, prefetch = prefetch, :
ORA-06520: PL/SQL: Error loading external library
ORA-06522: Unable to load DLL
ORA-06512: at "RQSYS.RQEVALIMPL", line 17
ORA-06512: at "RQSYS.RQEVALIMPL", line 14
ORA-06512: at line 4
R>
R>
R> ore.is.connected()
[1] TRUE
R> I get the exact same error when I try to use even the ORE user "rquser". Any suggestion how to resolve this error?
Thanks,
Sourabh

Installation error: Cannot find a J2SE SDK installed at path C:\Program Fi

I am installing latest version of SQL Developer, Release 1.2. I have Sun Java 2 Standard Edition Version 1.5.0 (build 1.5.0_10-b03). When I browse and select the java.exe found it comes up with error: Cannot find a J2SE SDK installed at patch
C:\Program Files\Java\jre1.5.0_10
I am installing the version I downloaded for Windows systems with JDK1.5.
I have tried on two different machines.
Any ideas?

This is going to seem loooong, but comprehensive.
I'd initially always suggest using the bundled
package, since that's supposed to be a tested and
proven combination.You know what, I'm gonna be mighty surprised if you're implying that Oracle hasn't 'tested and proven' the releases at http://www.oracle.com./technology/software/products/sql/index.html other than the first 77 MB download labeled Oracle SQL Developer for Windows... :)
After having problems with a graphics card for
example, installing the latest JDK might be
indicated.Huh?!? Not a clue what you're talkin' 'bout! :S
It's also easy for users who don't know which Java
version to download, or even where to find it! You
guys have proven that: although it's stated you need
.First of all, it says right there on the download page (http://www.oracle.com./technology/software/products/sql/index.html) that:
"JDK 1.5 (JDK 5.0) is required. This is the minimum JDK version required"
And we've "proven that [..] although it's stated you need the JDK, [we]'ve tried running with the JRE" and have NOT been able to run the application. It just presents the user a dialog box to locate the 'SDK' manually and exits gracefully if you try to dismiss it. So, conclusively proven, the JDK (or as SQL Developer puts it, Java SDK) is required- QED.
And given users might have several versions running
on the same machine (I have half a dozen), sqldev
could easily pick up a wrong version.And every JRE installation (atleast all of Sun's) make sure they update the default (via PATH and other required system variables) JRE point to the latest one installed. So if you have anything 1.5+ you're good to go; if not, you've got an incompatile JRE. Doesn't sound that hard to me!
As for being bulky, even without the bundled JDK, it
still is.Ya missed the point. Developers are making Java applications bulkier by including the JRE/JDK with their distributions. A SQL Developer release sans JDK is about 46 MB; with JDK that climbs to 77 MB (sizes quoted from download page linked above).
Imagine what happens when you have, besides SQL Developer (JDK 1.5 included), some-cool-java-app that also includes the JRE/JDK it was built on; and then another-java-app that also includes a JRE/JDK... I bet JDeveloper also comes with a JDK bundled in. So, now you have FOUR copies of JRE/JDK (aside from the "have half a dozen" that probably installed themselves via Java Update Checker)!
Here's the big picture, the savings in disk space would only be the beginning of your benefits. Here's a few others:
- Class Data Sharing (http://java.sun.com/javase/6/docs/technotes/guides/vm/class-data-sharing.html) introduced in Java SE 5.0 provides for storing definitions of commonly used classes in a representation closer to machine code, even closer than bytecode, this reducing load and startup time. Plus all VM's launced using that particular distribution get to share the cache- Performace+ !!
Running each app offa' it's own VM just causes multiple caches to be loaded. You just multiplied your losses! :(
- Sun is currently working on a way to have applications simply inject into a running JVM. That way, there is no load and startup time for the JVM, just the time to load you app classes. Using different distros would completely defeat this!
(The reason why this feature isn't out yet is because they're still trying to make it possible to specify hitherto VM configurations like security and logging as application configurations. Then there's also the issue of setting up class loading boundaries between applications.
You say you don't have to bring over the VB runtime
for each app? I remember in the 90's doing it all the
time. Of course, being MS, now that's not necessary
anymore, since it's "magical" Windows. I don't have
any machine from Sun, but for sure they've got Java
bundled with it, right?I don't believe you had to do that since VB 5; and that's because MS realized that they messed up on this very point upto then! Sun worked the simple solution to that into their deployment strategy- install only ONE runtime and run all apps off that. As for you're half-a-dozen, I think you can safely uninstall the five older versions; because, even today, people are running apps developed using JDK1.1 on Java SE 6.0!
Again, I find the most logical difference between JRE
and JDK being the debugger. As you say it yourself:
JRE for end-users, who don't need to do any
debugging.
Now, sqldev is not just a table browser, but also for
debugging PL/SQL. 1 + 1 = 2.I think it's a little naive to differentiate between the JRE and JDK on just the debugger! Aside from the obvious inclusion of a compiler, the JDK has several other tools for monitoring/managing the heap, threads and logging on the fly. There's also the Doclet API and Sun's javadoc implementation, dev interfaces for instrumenting the VM, native interfaces, ...
And I reiterate, we're talkin' PL/SQL developers here. Why would I want to give a PL/SQL developer a Java Development Kit?!? ;|
Nevertheless, as said in the other thread, if the
team discloses how to circumvent the SDK check at
startup, you can go ahead and use the JRE. In any
case, you'd have to agree that won't work as
out-of-the-box solution...You're right, it won't work like a standard Windows OOTB app. But, it WILL work as a Java OOTB that only mandates that there be a JRE available; just like the scores of Java apps out there- from tiny little Pong clones to large IDE's like NetBeans.
BTW, don't even think about quoting Websphere/Rational/Eclipse as counter-arguments. They are the biggest offenders as far as this issue goes. And jikes is an abomination, a curse Sun must carry as a result to opening the VM Spec. But, I digress...

Error:cannot resolve Symbol class"name"

when I have compiled Bean class named SlBean which has primary class named pk, I recevied following error message(I compiled pk class without error) :
cannot resolve symbol
symbol : class pk
location: class SlBean
public pk ejbCreate(

Sorry , its not classpath problem. You have to simply import the pk class if its in any package. I am assuming you have packaged your pk class with ejb jar file.
for eg. if your class is
package abc.xyz
public class pk
then in your bean class import
import abc.xyz.pk;
--Ashwani

[Flat File Source [2]] Error: Cannot open the datafile "VendorPurchases20050512.txt".

hi
I'm trying to use foreachloop container in order to read the data that i have in several txt files and upload it into MRR table.
when i'm trying to run the package, i'm getting the following error:
[Flat File Source [2]] Warning: The system cannot find the file specified.
[Flat File Source [2]] Error: Cannot open the datafile "VendorPurchases20050512.txt".
[SSIS.Pipeline] Error: Flat File Source failed the pre-execute phase and returned error code 0xC020200E.
I don't know what's the problem since it was working before.In the flat file connection manager i defined all the path including the name of the file.
I'll be happy for assistance
thanks
Yaron

Hi Yaron,
Does the file stored in local file system or a share folder on remote server? If you can load data from a file in local computer, but cannot load data from a file in a remote computer, the issue may be caused by the Kerberos authentication. In this condition,
check the following points:
Enable SQL Server for Kerberos
Check delegation settings for SQL Server service account and Computer
Add Host SPNs for FileShare Server and SQL Server
References:
http://msdn.microsoft.com/en-us/library/dd568720.aspx
http://msdn.microsoft.com/en-us/library/ms191153.aspx
Regards,
Mike Yin
TechNet Community Support

Error occured in deployment step 'Add Solution': Error: Cannot add the specified assembly to the global assembly cache

hi,
I have created a separate project which contains a class which has some generic methods- its a Utility class.[ its a class library project ]
I added this dll into my SharePoint project's wsp package [package--> advanced-->add assembly project from output ] [ SP 2013/ VS 2012]
So till yesterday everything was working fine, its has successfully deployed in the GAC.
But today when I tried to deploy my solution I got this error
"Error occured in deployment step 'Add Solution': Error: Cannot add the specified assembly to the global assembly cache" .
I closed the VS and did iisreset , and uninstalled dll using powershell . and i went to package removed the dll from the wsp package and deployed again.
Now when i added the dll into this package again, it failed to deploy.
can anyone tell , why this is happening. i have not done any changes in the dll yesterday or today.
suddenly , it started behavin stranegly.

Use the power shell command to delete dll
http://www.c-sharpcorner.com/uploadfile/anavijai/how-to-install-or-uninstall-dll-in-gac-using-powershell/

Configure: error: Cannot find php-config

After security update 2008-002 for Leopard, the PHP module builder stops, because the PHP version running on the machine doesn't match the header files from the PHP-developer part. More info see: http://www.naquah.net/blog/dennis/2008/03/20/how-to-get-eaccelerator-working-aga in-after-installing-security-update-2008-0#comment-50
After editing /usr/bin/php-config
Change
version="5.2.4" to version="5.2.5" and
vernum="50204" to vernum="50205"
and /usr/include/php/main/php_version.h
Change
#define PHPRELEASEVERSION 4 to #define PHPRELEASEVERSION 5
#define PHP_VERSION "5.2.4" to #define PHP_VERSION "5.2.5" and
#define PHPVERSIONID 50204 to #define PHPVERSIONID 50205
the ./configure command stops with a:
configure: error: Cannot find php-config. Please use --with-php-config=PATH
even when explicitly specifying the php-config location, the ./configure --with-php-config=/usr/bin/php-config command still throws an identical error.
The file is there, accessible and not empty:
$ ls -l /usr/bin/php-config
-r-xr-xr-x 1 root wheel 3031 22 mrt 21:44 /usr/bin/php-config
$ head /usr/bin/php-config
#! /bin/sh
SED="/usr/bin/sed"
prefix="/usr"
exec_prefix="${prefix}"
version="5.2.5"
vernum="50205"
include_dir="${prefix}/include/php"
includes="-I$include_dir -I$include_dir/main -I$include_dir/TSRM -I$include_dir/Zend -I$include_dir/ext -I$include_dir/ext/date/lib"
ldflags=" -L/usr/lib/mysql"
Re installing Xcode 3.0 didn't solve the problem.
What could be done to repair the (php) configure command, to allow me to build php modules again?

On my installation I have both NVidia and mesa drivers installed, thus two sets of GL headers/libraries.
For Mesa: SUNWxorg-mesa
Nvidia: NVDAgraphics
If you want to develop on your system you may want to install much more than just GL headers.
Its a pity that Solaris packaging is not really flexible, so you better do a full install indeed...
regards,
__Fedor.

Error: Cannot extend package

Similar Messages

Maybe you are looking for