Error "Channel binding security failure" in tuxedo 8.1

When I tried to connect from domain "WERD_DOMAIN_ACCEPT" from one machine to another domain "atdexprodcp2" on another machine, I am getting the following error message in the ULOG:
092119.lasxxx!GWTDOMAIN.23146.1.0: LIBGWT_CAT:1549: ERROR: Failed security validation with remote domain (domainid=atdexprodcp2)
092119.lasxxx!GWTDOMAIN.23146.1.0: LIBGWT_CAT:1008: ERROR: Unable to connect to remote domain (domainid=<atdexprodcp2>)
092200.lasxxx!GWTDOMAIN.23146.1.0: LIBGWT_CAT:1535: ERROR: Channel binding security failure
092200.lasxxx!GWTDOMAIN.23146.1.0: LIBGWT_CAT:1550: ERROR: Failed security validation with remote domain (domainid=atdexprodcp2)
092200.lasxxx!GWTDOMAIN.23146.1.0: LIBGWT_CAT:1008: ERROR: Unable to connect to remote domain (domainid=<atdexprodcp2>)
The domain config file on LASXXX:
*DM_LOCAL_DOMAINS
WERD_DOMAIN_ACCEPT GWGRP=GWGROUP
TYPE=TDOMAIN
DOMAINID="WERD_DOMAIN_ACCEPT"
DMTLOGDEV="/home/tuxedo/DMTLOG.log"
DMTLOGNAME="DMTLOG"
SECURITY=DM_PW
*DM_REMOTE_DOMAINS
ATS_PRODCP2_DOMAIN TYPE=TDOMAIN
DOMAINID="atdexprodcp2"
ATS_PRODCP1_DOMAIN TYPE=TDOMAIN
DOMAINID="atdexprodcp1"
WERD_DOMAIN_TRAIN TYPE=TDOMAIN
DOMAINID="WERD_DOMAIN_TRAIN"
*DM_TDOMAIN
WERD_DOMAIN_ACCEPT NWADDR="//lasxxx:20501"
ATS_PRODCP1_DOMAIN NWADDR="//lasyyy:36651"
ATS_PRODCP2_DOMAIN NWADDR="//lasyyy:37651"
WERD_DOMAIN_TRAIN NWADDR="//lasun114:20601"
*DM_REMOTE_SERVICES
The domain config file on LASYYY:
*DM_LOCAL_DOMAINS
atdexprodcp1 GWGRP=TXGW01
TYPE=TDOMAIN
DOMAINID="atdexprodcp1"
SECURITY=DM_PW
BLOCKTIME=30
*DM_REMOTE_DOMAINS
atdeluat TYPE=TDOMAIN
DOMAINID="atdeluat"
WERD_DOMAIN_DEV1 TYPE=TDOMAIN
DOMAINID="WERD_DOMAIN_DEV1"
*DM_TDOMAIN
atdexprodcp1 NWADDR="//lasyyy:36651"
WERD_DOMAIN_ACCEPT NWADDR="//lasxxx:20501"
Could someone know how to fix this problem?

The most common cause to this problem is incorrectly configured /Domain password pair, the next common cause is the mis-matched configuration. But before I give you more definite answer I need to clear few things up first.
1. The log shown that it failed to connect to "atdexprodcp2" but the DM configuration file on laxyyy only shown "atdexprodcp1", can you give me the complete configuration file on laxyyy?
2. Can you give me the Tuxedo version and RP level on both lasxxx and lasyyy?
3. it looks like you have 2 failures with 41 seconds in between. The first failure shown that WERD_DOMAIN_ACCEPT is the session initiator. The second failure shown that WERD_DOMAIN_ACCEPT is the session responder. My question is does the first failure also related to channel binding? (because the ULOG fragment in your post may be truncated it, and it does not show the root cause of the failure)

Similar Messages

  • HT4864 I am using Entourage and followed all the instructions above and still getting IMAP Server error.  Error msg:Security failure.  Data decryption error.

    I am using Entourage and followed all the instructions above and still getting IMAP Server error.  Error msg:Security failure.  Data decryption error.

  • Parameter error - bad bind variable in a Package..!!

    Hello All
    i am tring to create a security package with in one procedure i am trying to handle the number of times the user enters the wrong user name or password:
    -i created a parameter on my login form and add it to my procedure and it works just fine,But when i tried to copy the same procedure the package inside my library can't recognize that Parameter.
    -It gives me error : bad bind variable.
    The code is as follows.
    PARAMETER.COUNT := :PARAMETER.COUNT + 1;
    IF :PARAMETER.COUNT > 3 THEN
    WRONG_ALERT('WRONG_PASS',' ur number of trials has expiered the form will be closed ');
    EXIT_FORM;
    END IF;
    Can anyboady help me pls.
    Regards,
    Abdetu.

    Super,It works Just fine.
    Thanks Gerd,
    That's make me decide that if i have the following statatment for example:
    IF :USER_CODE IS NULL THEN .........
    I have to change it to :
    IF copy (name_in ('USER_CODE' )) IS NULL THEN..........
    But,if i have the following select statment :
    ==============================
         SELECT USER_CODE , USER_PASS WORD
         INTO :GLOBAL.USER_CODE , :GLOBAL.USER_PASS WORD
         FROM APP_USERS
         WHERE USER_CODE = :USER_CODE
         AND USER_PASS WORD= :USER_PASS WORD;
    Should i transfer it to the following:
    =========================
    SELECT USER_CODE , USER_PASS WORD
    INTO     COPY(NAME_IN ('GLOBAL.usr_code'), COPY(NAME_IN ('GLOBAL.PASSWORD')
    FROM APP_USERS
         WHERE USER_CODE = COPY(NAME_IN ('USER_CODE' )
    AND USER_PASS WORD=COPY(NAME_IN ('USER_PASS WORD');
    Pls help me,it's my first time ...
    Thanks in advance.
    Regards,
    Abdetu.

  • ERROR: transport error 202: bind failed: Address already in use

    Hey guys,
    I created 2 WL 10.3 Domains. I can start the admin server in domain but when I start the second admin server i get the following error:
    starting weblogic with Java version:
    ERROR: transport error 202: bind failed: Address already in use
    ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
    JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../.
    ./../src/share/back/debugInit.c:690]
    FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_E
    RROR_TRANSPORT_INIT(197)
    Starting WLS with line:
    C:\bea\JDK160~1\bin\java -client -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket
    ,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms512m -Xmx512m -XX:Com
    pileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -XX:MaxPermSize=160m
    -Xverify:none -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea... -da:
    javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.
    sbconsole... -Dplatform.home=C:\bea\WLSERV~1.3 -Dwls.home=C:\bea\WLSERV~1.3\serv
    er -Dweblogic.home=C:\bea\WLSERV~1.3\server -Dweblogic.management.discover=tru
    e -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true
    -Dweblogic.ext.dirs=C:\bea\patch_wlw1030\profiles\default\sysext_manifest_classp
    ath;C:\bea\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\bea\patch
    cie670\profiles\default\sysextmanifest_classpath;C:\bea\patch_alsb1031\profile
    s\default\sysext_manifest_classpath -Dweblogic.Name=TestAdmin2 -Djava.security.p
    olicy=C:\bea\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
    ERROR: transport error 202: bind failed: Address already in use
    ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
    JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../.
    ./../src/share/back/debugInit.c:690]
    FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_E
    RROR_TRANSPORT_INIT(197)
    Stopping PointBase server...
    I changed the port address of both admins but I dont' think that's the issue. Can someone tell me whats going on.
    Thanks

    Hi
    Iam getting the Same Error , Can you provide me some information on what changes did you made to the setDomainEnv.cmd file to make this work
    thanks in advance

  • IMacros error= NS_ERROR_UNEXPECTED: Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref], line 3 (Error code: -1001)

    I use Imacros. I got this error NS_ERROR_UNEXPECTED: Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref], line 3 (Error code: -1001). I think it is because of this version of mozilla firefox 28.0. I read I should downgrade the version to 27, but I have read it is not safety. Will the problem will be resolve? if not I think I should take the risk...

    hello abmporras, please report the issue to the developer's of the addon through the support channels listed at https://addons.mozilla.org/firefox/addon/imacros-for-firefox/. they should be able to address the issue better.

  • Using MBSA 2.2 getting error 'Cannot load security CAB file" when attempting to scan any remote systems

    Could scan all remote servers previously from same sources and version.  Replaced/updated all cabs and other files associated (C:\Documents and Settings\<username>\Local Settings\Application Data\Microsoft\MBSA\Cache) with no change.  Removed/re-installed
    MBSA 2.2 with not effect.
    Local scans appear to function fine, but do not wish to download MBSA on EVERY system we need to scan.
    Settings for remote scan are: Check for security updates>Configure computers for Microsoft
    Update and scanning prerequisites>Advanced Update Services
    options:>Scan using
    Microsoft Update only
    Have attempted from different systems/OS's, with same results.  Checked firewall for any blocked traffic from both host and scanner, no entries.
    Checked Technet/blogged for about two hours, without any positive results. Please advise/assist.
    Regards,
    AJ Lebeau
    MCSE, MCP, MCP+I, CNA, ACNA, A+
    Server Administrator
    Progenics Pharmaceuticals
    [email protected]
    (914) 789-4558

    Thank you for sending this to the MBSA forums!
    If you haven't already, you may want to check the MBSA FAQ located here:
    http://technet.microsoft.com/en-us/security/cc184922 specifically under the sections titled, "How can I scan a computer that is protected by a firewall" (to resolve potential DCOM connectivity issues), and "When attempting to scan a remote machine,
    why do I see the error 'Cannot deploy security metadata?"
    This is also a very misleading error message since the problem could be due to connectivity to the target (client) machines - nothing relating to the CAB file.  In any circumstance, you should not need to install MBSA on all of the target machines to
    successfully assess their security state. 
    Possible solutions include
    Confirm the latest WUA client is installed on all target machines (with the files you've already placed in the cache directory, you can simply check the scan option to "Configure computers for Microsoft
    Update and scanning prerequisites" - which will update and re-register each target machine with the latest WUA client and the ability to respond to requests from MBSA.
    Check whether the target machines have limited disk space (unlikely)
    Check DCOM settings on both the server - but more likely due to the failure to remotely scan - the target machines.
    Change the scan options to further troubleshoot.  Specifically, 'Check for security updates' option uses a DCOM connection to the target WUA client while the other scan settings 'Check for weak passwords, etc." use specific UDP/TCP ports as indicated
    in the System Requirements section of the MBSA help file and the MBSA FAQ.  Also use the 'Advanced Update Services options' to determine whether WSUS connectivity may be at issue.
    Please let me know if that helps.
    Doug Neal - Microsoft Update and MBSA

  • Recurring error - gssd "Unsecified GSS failure"

    HI. I am getting multiple entries of these errors every time someone attaches to our G5 SL server. We updated to 10.6.7 and we are still getting them.
    gssd [31658] Error returned by svc_mach_gss_init_sec_context:
    Major error = 851968: Unspecified GSS failure. Minor code may provide more information
    I searched through the forums and found someone asking what this is, and got this answer.
    >>>General Security Services. The gssd daemon makes these GSS services available to the NFS server. If the gssd daemon is not running, then efforts to >>>access files via NFS using Kerberos will fail.
    But they never say how to get rid of the error. I found an IBM man page talking about the gss services and found the commands to start and stop it,
    >>>>The gssd daemon is started and stopped with the following System Resource Controller (SRC) commands:
    >>>> startsrc -s gssd  stopsrc -s gssd
    Is it as simple as starting this service?
    Any help would be most appreciated.

    Anybody? Bueller?

  • Error while accessing secure store

    Hi Team,
    We are on EP 7.0 on SQL server 2005 . Iam facing one problem , in sometimemy IRJ pOrtal site stops giving error " Java iView Runtime " .At this time what happens that in my usr/sap drive , the sap folder is not shown as shared its share goes away and that time when i connect to visual admin tool the authentication fails and that time config tool gives error
    #1.5#00188B417A01007E0160B338000008FC00045DE876A4C303#1229152911187#com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl##com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl#Guest#2####f168def0c8c411dd9a2100188b417a01#SAPEngine_Application_Thread[impl:3]_29##0#0#Error##Plain###ManagedConnectionFactoryImpl.createManagedConnection(): SQLException occured while creating ManagedConnection: com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "
    musaprd
    sapmnt
    PWC
    SYS
    global
    security
    data
    SecStore.properties" does not exist although it should..#
    #1.5#00188B417A010085015AAAF5000008FC00045DE876A4C207#1229152911187#com.sap.sql.connect.OpenSQLDataSourceImpl##com.sap.sql.connect.OpenSQLDataSourceImpl#Guest#2####09e36ed0c8c711dd93b200188b417a01#SAPEngine_Application_Thread[impl:3]_39##0#0#Error#1#/System/Database/sql/connect#Java#com.sap.sql_0019##Exception of type com.sap.sql.log.OpenSQLException caught: Error while accessing secure store: File
    When i check in this path SecStore.properties is there , also i have checked the permissions .....................please revert the reason of this error  . 
    Main part of this all is that after taking a reboot everything becomes fine , this happens every few days .
    Please revert to this .
    Regards,
    Somya

    Hi,
    This error crops up when the the folder usr/sap folder sharing is lost .  We  have recently faced this problem this is Windows OS level problem you can ask your OS admin. Applying a security patch will do.
    Regards,
    Vamshi.

  • Error while accessing secure store: File "SecStore.properties" does not exi

    Hi ,
    I have a java desktop application, and i am trying to get a connection from a datasource deployed on one SAP AS Java, I can get the datasource succsfullly but when i try to get a connection from the DS, it throughs this exception, I put the secstore..properties file in the classpath even after that it is not happy,
    any solution/hint/light please!!!!
    com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "SecStore.properties" does not exist although it should..
         at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106)
         at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:145)
         at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:226)
         at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:197)
         at com.sap.customcode.ConflictingActionFixture.(ConflictingActionFixture.java:53)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
         at java.lang.reflect.Constructor.newInstance(Unknown Source)
         at java.lang.Class.newInstance0(Unknown Source)
         at java.lang.Class.newInstance(Unknown Source)
         at fit.FixtureClass.newInstance(Unknown Source)
         at fit.FixtureLoader.instantiateFixture(Unknown Source)
         at fit.FixtureLoader.instantiateFirstValidFixtureClass(Unknown Source)
         at fit.FixtureLoader.disgraceThenLoad(Unknown Source)
         at fit.Fixture.loadFixture(Unknown Source)
         at fit.Fixture.getLinkedFixtureWithArgs(Unknown Source)
         at fit.Fixture.doTables(Unknown Source)
         at fit.FitServer.process(Unknown Source)
         at fit.FitServer.run(Unknown Source)
         at fit.FitServer.main(Unknown Source)
    Caused by: com.sap.security.core.server.secstorefs.FileMissingException: File "SecStore.properties" does not exist although it should.
         at com.sap.security.core.server.secstorefs.StorageHandler.openExistingStore(StorageHandler.java:372)
         at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1946)
         at com.sap.sql.connect.OpenSQLConnectInfo.getStore(OpenSQLConnectInfo.java:802)
         at com.sap.sql.connect.OpenSQLConnectInfo.lookup(OpenSQLConnectInfo.java:783)
         at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:209)
         ... 18 more
    caused by

    the SecStore.key file was not there, I changed the passwd and checked the 'Encryption' on, after that my sever instance is not starting.
    Any idea?
    -Puneet

  • Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5015. SQL 2012 SP1

    Hi,
    Please help. I was trying to remove a SQL 2012 SP1 two node clustered instance using setup (Mantenance -> Remove Node)
    I started by doing this on passive node (and was successful) but when I ran setup on active node just before finishing successfully I got this error:
    TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
    The following error has occurred:
    The resource 'BCK_SG1DB' could not be moved from cluster group 'SQL Server (SG1DB)' to cluster group 'Available Storage'. 
    Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5015.
    Description: The operation failed because either the specified cluster node is not the owner of the resource, or the node
    is not a possible owner of the resource.
    For help, click:
    http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE8049925%25400x42B4DED7
    BUTTONS:
    OK
    I noticed that SG1DB instance was removed on both nodes but on Failover Cluster Manager -> Services and Applications the SQL server instance for SG1DB is still there. So I tried to delete it but got the error:
    Failed to delete SQL Server SG1DB. An error was encountered while deleting the cluster service or
    application SQL Server SG1DB. Could not move the resource to available storage. An error occured
    while moving the resource BCK_SG1DB to the clustered service or application Available Storage
    Any ideas why it failed or how could I delete the SQL server instance from Clauster?
    Thx

    Hello,
    Please read the following resource.
    https://support.microsoft.com/en-us/kb/kbview/313882?wa=wsignin1.0
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • DI error when binding user defined table

    Hi,
    I am using matrix. Im binding a User defined table '@NEW' to a Datasource
    oForm.DataSources.DBDataSources.Add("@NEW")
    I also bind the fields to column of the matrix as given below
    oColumn = oColumns.Item("CodeNo")
    oColumn.DataBind.SetBound(True, "@NEW", "U_CodeNo")
    When the table @New contains no records i get error while binding the fields to the matrix.
    I tried the same using STANDARD SAP tables.I am not getting any error and it works fine.
    Can anyone help me?

    Hi,
    I am using matrix. Im binding a User defined table '@NEW' to a Datasource
    oForm.DataSources.DBDataSources.Add("@NEW")
    I also bind the fields to column of the matrix as given below
    oColumn = oColumns.Item("CodeNo")
    oColumn.DataBind.SetBound(True, "@NEW", "U_CodeNo")
    When the table @New contains no records i get error while binding the fields to the matrix.
    I tried the same using STANDARD SAP tables.I am not getting any error and it works fine.
    Can anyone help me?

  • Invalid number error for bind dialog

    Oracle SQL Developer version 1.1.2.25 BUILD MAIN-25.79
    Running under WinXP
    Issue description:
    We get an invalid number error when bind variable filled with an enter in the bind dialog

    It is hard to say what is causing your problem without the specifics (ie query and value entered for the bind variable). Try running the same statement with the value of the bind variable in place of the bind variable (ie instead of running "select * from dual where dummy = :var" with a value of 'x' for :var, run "select * from dual where dummy = 'x'"). If you get the same error, then it is not an issue with the use of bind variables.
    Be aware that currently you cannot define the data type of bind variables (unlike TOAD, etc) and they are all treated as character values. I wouldn't have thought that this would cause you problem unless you are using a bind variable to restrict a numeric column to a specific value and you are entering a non-numeric bind (ie "select * from people where person_id = :id" and using 'xyz' as the value for :id).

  • 3194 error while updating, Secure Link to iTunes Store Failed, No Audio CD Found

    Microsoft Windows 7 Ultimate Edition (Build 7600)
    LENOVO 20060
    iTunes 10.7.0.21
    QuickTime not available
    FairPlay 2.2.19
    Apple Application Support 2.2.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.0.59
    Apple Mobile Device Driver 1.62.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0021AD5C0CB4E590
    Current user is an administrator.
    The current local date and time is 2012-10-21 19:54:53.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {1AD46418-B495-4CAD-9306-A2618C2232F1}
    Description:    MBlaze USB Modem
    IP Address:    116.202.189.231
    Subnet Mask:    255.255.255.255
    Default Gateway:    0.0.0.0
    DHCP Enabled:    No
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 05:30:00 1970
    Lease Expires:    Thu Jan 01 05:30:00 1970
    DNS Servers:    10.228.65.114
            116.202.225.32
    Adapter Name:    {B07E2D28-A979-4D44-B2C6-99976836038C}
    Description:    Microsoft Virtual WiFi Miniport Adapter
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 05:30:00 1970
    Lease Expires:    Thu Jan 01 05:30:00 1970
    DNS Servers:   
    Adapter Name:    {DDBDA14A-F067-44FA-B614-75C87B94AC17}
    Description:    Atheros AR9285 Wireless Network Adapter
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 05:30:00 1970
    Lease Expires:    Thu Jan 01 05:30:00 1970
    DNS Servers:   
    Adapter Name:    {9AD087AB-E670-48E2-8A24-A53AE3FC7E2A}
    Description:    Realtek RTL8102E/RTL8103E Family PCI-E Fast Ethernet NIC (NDIS 6.20)
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 05:30:00 1970
    Lease Expires:    Thu Jan 01 05:30:00 1970
    DNS Servers:   
    Active Connection:    MBlaze USB Modem
    Connected:    Yes
    Online:        Yes
    Using Modem:    Yes
    Using LAN:    No
    Using Proxy:    No
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2012-10-21 19:52:12.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: InCDPass (4.3.12.0), incdrm (4.3.12.0), GEARAspiWDM (2.2.3.0),
    F: HL-DT-ST DVDRAM GT30N, Rev LC01
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.7.0.21 is currently running.
    iTunesHelper 10.7.0.21 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34.  Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Connected Device Information:
    LenovoZ560’s iPhone, iPhone 3GS running firmware version 5.1.1
    Serial Number:    86923ZSC3NP
    Most Recent Devices Not Currently Connected:
    iPod nano (3rd Generation) running firmware version 1.0
    Serial Number:    5U735K0XYXX
    **** Device Sync Tests ****
    Sync tests completed successfully.
    Please help me, what to do?
    Message was edited by: dilip_b

    I think its weird that I experienced both the 3194 error code and "secure link to the itunes store failed" diagnostics error on three computers running on different OS (XP, vista and 7), itunes version and connectivity types (wireless and cabled). Could it be possible that there is a problem on Apple's server?
    Are you still there, shintenhouji?
    Perhaps try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (I've seen a few cases in recent times of this sort of thing being associated with LSP issues.)

  • ORA-06502: PL/SQL: numeric or value error: Bulk Bind: Truncated Bind

    Hi
    I am getting this run time error ORA-06502: PL/SQL: numeric or value error: Bulk Bind: Truncated Bind in my pl/sql . I tried evrything , changing datatypes ,etc but still this error is coming .What can be the cause , please help.
    declare
    svid xxpor_utility.p_svid@sppmig1%type;
    p_sv_id xxpor_utility.p_svid@sppmig1%type;
    tab xxpor_utility.xxpor_indextab@sppmig1;
    svid1 xxpor_utility.p_svid@sppmig1%type;
    p_sv_id1 xxpor_utility.p_svid@sppmig1%type;
    tab1 xxpor_utility.xxpor_indextab@sppmig1;
    svid2 xxpor_utility.p_svid@sppmig1%type;
    p_sv_id2 xxpor_utility.p_svid@sppmig1%type;
    tab2 xxpor_utility.xxpor_indextab@sppmig1;
    svid3 xxpor_utility.p_svid@sppmig1%type;
    p_sv_id3 xxpor_utility.p_svid@sppmig1%type;
    tab3 xxpor_utility.xxpor_indextab@sppmig1;
    v_index t2_error_table.id_value%type;
    v_code t2_error_table.error_code%type;
    p_error varchar2(600);
    k number(20):=0;
    v_msg varchar2(2000);
    v_commit_count number(10);
    v_at_gpid varchar2(512);
    v_at_oper varchar2(512);
    v_sch varchar2(512);
    v_vat varchar2(512);
    exp exception;
    exp1 exception;
    exp2 exception;
    exp3 exception;
    exp4 exception;
    v_pay varchar2(512);
    v_res varchar2(512);
    v_digit varchar2(512);
    v_agree varchar2(512);
    v_driver_licence PERSON_HISTORY.drivers_licence%TYPE;
    v_cus_gen1 number(10);
    v_cus_gen2 number(10);
    v_cus_gen3 number(10);
    svid_sr number(10);
    v_social PERSON_HISTORY.social_security_number%TYPE;
    CURSOR person_cur (p_person_id person_history.person_id%TYPE)
    IS
    SELECT drivers_licence ,social_security_number
    FROM PERSON_HISTORY@SPPMIG1
    WHERE PERSON_ID=p_person_id --p2(p).person_id
         AND EFFECTIVE_START_DATE = (SELECT MAX(EFFECTIVE_START_DATE)
         FROM PERSON_HISTORY@sppmig1
                                            WHERE PERSON_ID=p_person_id);--p2(p).person_id) ;
    --p number(20):=1;
    --j number(20);
    cursor c1 is
    select * from cus_node_his ;
    type temp_c1 is table of customer_node_history%rowtype
    index by binary_integer;
    t2 temp_c1;
    type temp_c2 is table of customer_node_history@slpmig1%rowtype
    index by binary_integer;
    p2 temp_c2;
    /*cursor c2(p_id customer_query.customer_node_id%type) is
    select general_1,general_2,general_3
    from customer_query@sppmig1 c where c.customer_query_type_id=10003 and
    c.customer_node_id(+) =p_id
    and c.open_date = (select
    max(open_date) from customer_query@sppmig1 where customer_node_id=p_id
    and customer_query_type_id=10003 and c.customer_query_id =(select max(customer_query_id) from customer_query@sppmig1
    where customer_node_id=p_id and customer_query_type_id=10003));*/
    procedure do_bulk_insert is
    bulk_errors EXCEPTION;
    PRAGMA EXCEPTION_INIT(bulk_errors, -24381);
    begin
    forall j in 1..t2.count SAVE EXCEPTIONS
    insert into aaa values t2(j);
    commit;
    --t2.delete;
    k:=0;
    v_msg:=sqlerrm;
    EXCEPTION WHEN bulk_errors THEN
    FOR L IN 1..SQL%bulk_exceptions.count
    LOOP
    v_index := SQL%bulk_exceptions(L).ERROR_INDEX;
    v_code := sqlerrm(-1 * SQL%bulk_exceptions(L).ERROR_CODE);
    --v_index := SQL%bulk_exceptions(j).ERROR_INDEX;
    --v_code := sqlerrm(-1 * SQL%bulk_exceptions(j).ERROR_CODE);
    INSERT INTO t2_error_table
    VALUES('CUSTOMER_NODE_HISTORY',
    'CUSTOMER_NODE_ID',
    v_msg,
    t2(v_index).customer_node_id,
    null,
    'DO_BULK_INSERT',
    v_code
    commit;
    END LOOP;
    end do_bulk_insert;
    begin
    select value into v_at_gpid from t2_system_parameter@sppmig1 where name='atlanta_group_id';
    select value into v_commit_count from t2_system_parameter@sppmig1 where name='batch_size';
    select value into v_sch from t2_system_parameter@sppmig1 where name='schedule_id';
    select value into v_pay from t2_system_parameter@sppmig1 where name='payment_location_code';
    select value into v_at_oper from t2_system_parameter@sppmig1 where name='atlanta_operator_id';
    select value into v_digit from t2_system_parameter@sppmig1 where name='digits_to_be_screened';
    select value into v_res from t2_system_parameter@sppmig1 where name='responsible_agent';
    select value into v_vat from t2_system_parameter@sppmig1 where name='vat_rate';
    select value into v_agree from t2_system_parameter@sppmig1 where name='bank_agreement_status';
    xxpor_utility.xxpor_loadmemory@sppmig1('CUSTOMER_NODE_HISTORY','CUSTOMER_NODE_TYPE_ID',tab);
    xxpor_utility.xxpor_loadmemory@sppmig1('CUSTOMER_NODE_HISTORY','CREDIT_RATING_CODE',tab2);
    xxpor_utility.xxpor_loadmemory@sppmig1('CUSTOMER_NODE_HISTORY','PAYMENT_METHOD_CODE',tab3);
    xxpor_utility.xxpor_loadmemory@sppmig1('CUSTOMER_NODE_HISTORY','CUSTOMER_NODE_STATUS_CODE',tab1);
    open c1;
    loop
    fetch c1 bulk collect into p2 limit v_commit_count;
    for p in 1..p2.count loop
    k:=K+1;
    begin
    xxpor_utility.xxpor_getsvid@sppmig1(p2(p).CUSTOMER_NODE_TYPE_ID,tab,svid);
    p_sv_id:=svid;
    xxpor_utility.xxpor_getsvid@sppmig1(p2(p).CUSTOMER_NODE_STATUS_CODE,tab1,svid1);
    p_sv_id1 :=svid1;
    xxpor_utility.xxpor_getsvid@sppmig1(p2(p).CREDIT_RATING_CODE,tab2,svid2);
    p_sv_id2:=svid2;
    xxpor_utility.xxpor_getsvid@sppmig1(p2(p).PAYMENT_METHOD_CODE,tab3,svid3);
    p_sv_id3:=svid3;
    OPEN person_cur (p2(p).person_id);
    FETCH person_cur INTO v_driver_licence, v_social;
    CLOSE person_cur;
    --select social_security_number  into v_social from person_history@sppmig1 where
    --PERSON_ID=p2(p).person_id AND EFFECTIVE_START_DATE = (SELECT MAX(EFFECTIVE_START_DATE) FROM
    --PERSON_HISTORY@sppmig1 WHERE PERSON_ID=p2(p).person_id) ;
    /*open c2(p2(p).customer_node_id);
    fetch c2 into v_cus_gen1, v_cus_gen2, v_cus_gen3;
    close c2;
    xxpor_utility.get_status_code@sppmig1(v_cus_gen1,v_cus_gen2,v_cus_gen3,svid_sr);*/
    svid_sr:=2600000;
    t2(k).CUSTOMER_NODE_ID     :=     p2(p).CUSTOMER_NODE_ID;
    t2(k).LAST_MODIFIED          :=     p2(p).LAST_MODIFIED;
    t2(k).EFFECTIVE_START_DATE     :=     p2(p).EFFECTIVE_START_DATE;
    t2(k).EFFECTIVE_END_DATE     :=     p2(p).EFFECTIVE_END_DATE;
    t2(k).CUSTOMER_NODE_TYPE_ID     := p_sv_id;
    if p_sv_id is null then
    raise exp1;
    end if;
    t2(k).PRIMARY_IDENTIFIER      :=     p2(p).PRIMARY_IDENTIFIER;
    t2(k).PRIMARY_IDENTIFIER2     :=     p2(p).PRIMARY_IDENTIFIER2;
    t2(k).NODE_NAME           :=     p2(p).NODE_NAME ;
    t2(k).NODE_NAME_UPPERCASE     :=     p2(p).NODE_NAME_UPPERCASE ;
    t2(k).NODE_NAME_SOUNDEX     :=     p2(p).NODE_NAME_SOUNDEX;
    t2(k).ATLANTA_GROUP_ID          := v_at_gpid ;
    t2(k).ATLANTA_OPERATOR_ID     :=     p2(p).ATLANTA_OPERATOR_ID;
    t2(k).GL_CODE_ID          :=     p2(p).GL_CODE_ID;
    t2(k).PARENT_CUSTOMER_NODE_ID     := p2(p).PARENT_CUSTOMER_NODE_ID ;
    t2(k).HIERARCHY_LEVEL          := p2(p).HIERARCHY_LEVEL ;
    t2(k).ROOT_CUSTOMER_NODE_ID      := p2(p).ROOT_CUSTOMER_NODE_ID ;
    t2(k).CUSTOMER_NODE_STATUS_CODE := p_sv_id1 ;
    if p_sv_id1 is null then
    raise exp2;
    end if;
    t2(k).CREATED_DATE     :=          p2(p).CREATED_DATE;
    t2(k).ACTIVE_DATE      :=          p2(p).ACTIVE_DATE ;
    t2(k).PERSON_ID     :=          p2(p).PERSON_ID ;
    t2(k).PRIME_ACCOUNT_ID :=          p2(p).PRIME_ACCOUNT_ID;
    t2(k).REPORT_LEVEL_CODE :=          p2(p).REPORT_LEVEL_CODE;
    t2(k).POSTAL_ADDRESS_ID     :=     p2(p).POSTAL_ADDRESS_ID;
    t2(k).SITE_ADDRESS_ID     :=     p2(p).SITE_ADDRESS_ID ;
    t2(k).CURRENCY_ID      :=          p2(p).CURRENCY_ID;
    t2(k).SCHEDULE_ID     :=          v_sch;
    t2(k).BILLING_PRIORITY     :=     p2(p).BILLING_PRIORITY ;
    t2(k).BILLING_COMPLEXITY:=          p2(p).BILLING_COMPLEXITY ;
    t2(k).BILLING_CONFIGURATION_CODE     := p2(p).BILLING_CONFIGURATION_CODE;
    t2(k).SUPPRESS_IND_CODE           := p2(p).SUPPRESS_IND_CODE ;
    t2(k).SUPPRESS_BILL_CYCLE_COUNT := p2(p).SUPPRESS_BILL_CYCLE_COUNT;
    t2(k).SUPPRESS_UNTIL_ISSUE_DATE := p2(p).SUPPRESS_UNTIL_ISSUE_DATE;
    t2(k).TURNOVER               := p2(p).TURNOVER;
    t2(k).TURNOVER_CURRENCY_ID      :=     p2(p).TURNOVER_CURRENCY_ID ;
    t2(k).CREDIT_LIMIT           :=     p2(p).CREDIT_LIMIT ;
    t2(k).CREDIT_LIMIT_CURRENCY_ID :=     p2(p).CREDIT_LIMIT_CURRENCY_ID;
    t2(k).EXPECTED_REVENUE      :=     p2(p).EXPECTED_REVENUE ;
    t2(k).EXPECTED_REVENUE_CURRENCY_ID     := p2(p).EXPECTED_REVENUE_CURRENCY_ID ;
    t2(k).CREDIT_RATING_CODE      :=     p_sv_id2 ;
    -- if p_sv_id2 is null then
    --raise exp3;
    -- end if;
    t2(k).CREDIT_COMMENTS           := p2(p).CREDIT_COMMENTS ;
    t2(k).TAX_CLASS_CODE          := 1     ;
    t2(k).PAYMENT_METHOD_CODE     :=     p_sv_id3;
    --if p_sv_id3 is null then
    --raise exp4;
    --end if;
    t2(k).PAYMENT_LOCATION_CODE      := v_pay ;
    t2(k).BANK_CODE           :=     NULL;
    t2(k).BRANCH_CODE           :=     NULL ;
    t2(k).BANK_ACCOUNT_NAME     :=     p2(p).NODE_NAME ;
    t2(k).BANK_ACCOUNT_NUMBER     :=     '1000000';
    t2(k).BANK_ACCOUNT_REF      :=     v_agree;
    t2(k).CARD_TYPE_CODE          := p2(p).CARD_TYPE_CODE     ;
    t2(k).CARD_NUMBER          :=     p2(p).CARD_NUMBER ;
    t2(k).CARD_EXPIRY_DATE          := NULL ;
    t2(k).ASSIGNED_OPERATOR_ID      :=     NULL ;
    t2(k).SALES_CHANNEL_CODE     :=     0;
    t2(k).COMPANY_NUMBER          := NULL;
    t2(k).INDUSTRY_CODE          :=     NULL;
    t2(k).REGION_CODE           :=     NULL;
    t2(k).GENERAL_1          :=     v_vat ;
    t2(k).GENERAL_2           :=     svid_sr ;
    if svid_sr is null then
    raise exp;
    end if;
    t2(k).GENERAL_3           :=     v_social ;
    t2(k).GENERAL_4           :=     v_driver_licence ;
    t2(k).GENERAL_5           :=     v_vat;
    t2(k).GENERAL_6           :=     v_res;
    t2(k).GENERAL_7           :=     null||':'||null||':'||'1000000'||':'||null||':'||null||':'||null||':';
    t2(k).GENERAL_8          :=     '2' ;
    t2(k).GENERAL_9           :=     v_digit;
    t2(k).GENERAL_10          :=     p2(p).CUSTOMER_NODE_ID;
    exception when exp then
    p_error:= sqlerrm;
    insert into t2_error_table values ( 'CUSTOMER_NODE_HISTORY','CUSTOMER_NODE_ID',p_error,p2(p).customer_node_id
    ,null,null,null);
    commit;
    when exp1 then
    p_error:= sqlerrm;
    insert into t2_error_table values ( 'CUSTOMER_NODE_HISTORY','CUSTOMER_NODE_ID',p_error,p2(p).customer_node_id
    ,null,null,'customer_node_type_id is null');
    commit;
    when exp2 then
    p_error:= sqlerrm;
    insert into t2_error_table values ( 'CUSTOMER_NODE_HISTORY','CUSTOMER_NODE_ID',p_error,p2(p).customer_node_id
    ,null,null,'customer_node_status_code is null');
    commit;
    /*when exp3 then
    p_error:= sqlerrm;
    insert into t2_error_table values ( 'CUSTOMER_NODE_HISTORY','CUSTOMER_NODE_ID',p_error,p2(p).customer_node_id
    ,null,null,'credit_rating_code is null');
    commit;
    when exp4 then
    p_error:= sqlerrm;
    insert into t2_error_table values ( 'CUSTOMER_NODE_HISTORY','CUSTOMER_NODE_ID',p_error,p2(p).customer_node_id
    ,null,null,null);
    commit;*/
    when others then
    p_error:= sqlerrm;
    insert into t2_error_table values ( 'CUSTOMER_NODE_HISTORY','CUSTOMER_NODE_ID',p_error,p2(p).customer_node_id
    ,null,null,null);
    commit;
    end;
    if mod(k,v_commit_count)=0 then
    do_bulk_insert;
    t2.delete;
    end if;
    end loop;
    do_bulk_insert;
    exit when c1%notfound;
    end loop;
    t2.delete;
    exception when others then
    p_error:= sqlerrm;
    insert into t2_error_table values ( 'CUSTOMER_NODE_HISTORY','CUSTOMER_NODE_ID',p_error,null
    ,null,null,null);
    commit;
    RAISE;
    end;
    /

    Hi there,
    Following is the description of the error, you are getting.
    ORA-06502:VALUE_ERROR
    An arithmetic, conversion, truncation, or size-constraint error occurs. For example, when your program selects a column value into a character variable, if the value is longer than the declared length of the variable, PL/SQL aborts the assignment and raises VALUE_ERROR. In procedural statements, VALUE_ERROR is raised if the conversion of a character string into a number fails. (In SQL statements, INVALID_NUMBER is raised.)
    Hopefully this will help.

  • Trying to connect my iPad Air 1 to my iPhone 5S set as a hotspot via WiFi method.  iPad sees the iPhone as wifi hotspot, but an error appears 'Remote Hotspot Failure .. Unable to start personal hotspot'.   How do I fix this issue??

    Trying to connect my iPad Air 1 to my iPhone 5S set as a hotspot via WiFi method.  iPad sees the iPhone as wifi hotspot, but an error appears 'Remote Hotspot Failure .. Unable to start personal hotspot'.   How do I fix this issue??

    iOS: Troubleshooting Personal Hotspot - Apple Support

Maybe you are looking for

  • PAL & NTSC

    In a couple of months our crew goes on a music video shoot in Spain. We are going to use local production to shoot due to the cost of bringing all our gear and for public relations reasons etc. I assume they are going to shoot using PAL cameras. My q

  • Dynamically undeploying MDBs

              Hi,           I am using Weblogic 6.1 SP4 - Integrating with MQ5.2 using IBM MQ Classes.           I have an MDB which points to a MQ Queue. MDB takes the message and delegates           to specific Java Classes which parse the XML (body of

  • I am running Mountain Lion and have trouble installing Adobe Application Manager

    I am running Mountain Lion and have trouble installing Adobe Application Manager

  • Mac OS 10.5 - frozen during boot

    I have a macbook with leopard os installed (kernel version: Darwin 9.0). I installed xcode on my mac yesterday. About 2-3 hours later, the system just froze up. (xcode was not running. I was just doing some browsing.) So I did a cold shut down/restar

  • Sqldeveloper does not work under "xgl"

    Hi, I just installed "xgl" on my linux desktop and try to run "sqldeveloper". It starts as usual and open main window, but this window is empty ( no menus and other GUI ). sqldeveloper works fine when I restart my desktop with regular "xorg" server i