Error codes for install and uninstall

Hello I have Adobe reader 10.1.6 on my computer but it will not load I get 2 error codes a 2503 and 2502 if I try to uninstall the programe i get the same codes can you help

Use the Acrobat Removal Tool http://labs.adobe.com/downloads/acrobatcleaner.html
Note that this will also remove Acrobat, if you have it installed.

Similar Messages

  • How can I download itunes when I get the following errors...have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up..ituneshelper did not install correctly error 7

    How can I download itunes when I get the following errors  ..ituneshelper did not install correctly error 7..I .have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up.
    This has been a problem for 6 weeks now, I retry when I have time and patience and use my other laptop which is also Windows 7 and runs with no problem.
    Every attempt fails when all seems fine on the desktop and I try to log on to Itunes I get the errors.
    Any help greatly appreciated.
    billymac

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (If this won't uninstall press on)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshpp onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a p

    Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshop onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a password... any ideas how to get it working again?

    You can never, never migrate an installed copy of PSE. It's just too complex and you can't get to all the bits and bobs.
    First you will have to download and run this:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    which will not seem to do anything, but is necessary to break the links within PSE so that you can pitch the bits manually. Then you will have to go around, not only to applications, but also to your username>library>preferences and most importantly to the library at the top level of your hard drive>application support>adobe, and remove everything you can find. Spotlight will not help with this kind of search, so don't try that.
    Then you can install PSE from scratch.

  • Have installed and uninstalled Adobe Acrobat XI Pro on my Dell desktop running Windows 7 Professional. Each time I try to open a PDF file, I receive ERROR: 16 message. Would appreciate any suggestions. Thanks.

    Have installed and uninstalled Adobe Acrobat XI Pro on my Dell desktop running Windows 7 Professional. Each time I try to open a PDF file, I receive ERROR: 16 message. Would appreciate any suggestions. Thanks.

    Hi Doug Talbott,
    Please refer to the page associated with this link (Configuration error 16 | CC, CS) and follow the procedure detailed for Windows 7 and let me know if your issue gets resolved.
    Regards,
    Rahul Tyagi

  • I constantly get Error 7 (windows error 5) message.  I have installed and uninstalled repeatedly.  Any chance of getting Itunes on Windows 8.1?

    I had the older version of ITunes and then it disappeared.  When I try to install the new version, I keep getting "unable to install ITunes, Error 7 (windows error 5) message.  I have repeatedly installed and uninstalled iTunes without luck.  Any chance of actually getting this on Windows 8.1 or not?  I am assuming I also lost my library during this.

    Hey there Stardust37,
    Welcome to Apple Support Communities.
    The article linked below provides troubleshooting tips that can help you resolve the iTunes installation issue alert message that you’re seeing on your PC.
    iTunes for Windows: "Error 7" message when opening iTunes - Apple Support
    Cheers,
    -Jason

  • I have installed and uninstalled i tunes to windows vista several times and i keep getting an error message of no apple support

    I have tried numerous times to install and uninstall i tunes on windows vista and I keep getting an error message of no apple support.  Anyone have a solution to this?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version, or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Error on iTunes library file after installing and uninstalling 8.1

    I downloaded 8.1 after being prompted. After installing 8.1, I could not synch my IPod. I uninstalled 8.1, reinstalled 8.02, and now I am getting this error.
    Does anyone have any ideas on how to correct this? I have about 39 Gigs of music, and will have problems trying to restore this to a hard drive.

    I'm not sure if this is the right place to ask this; i'm new; after i installed the latest version of itunes, i get a library error message each time i open it up; it tells me i have an invalid library, then it creates a backup and calls it 'damaged1'; i have installed and uninstalled itunes 3 times now; each time, i erase all traces of past libraries, so that i start 'new'; the first time i open up itunes, i don't get the error message; i do absolutely nothing with the program, just close it; wait 5 seconds; open it up, and immediately i get the error message, and it creates a 'damaged1' back up; each time i open it, it creates a newer backup, and keeps adding 'movie, genius, dj' etc to my playlist; if i open it 10 times, i've got 10 of all these folders - HELP ME!

  • After downloading new version of Firefox 4 I am unable to use touch pad for scrolling. I have tried installing and uninstalling the new version but this problem has always been occuring.

    after downloading new version of Firefox 4 I am unable to use touch pad for scrolling. I have tried installing and uninstalling the new version but this problem has always been occuring. I do not know how to fix this problem so I always return to the old version.

    If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Lanuage codes for 'english' and 'english-2' must differ ERROR

    Hello, I'm trying to burn a single layer DVD for a clent of mine and whenever I pressthebuiold/format button a error that states: (lanuage codes for 'english' and 'english-2' must differ) pop up. I have been using DVD studio for some time now and have never ran into this. I don't belive I have changed any settings. anyone have any answers?
    thank you for your time
    Mike

    Hi Mike
    This is a common problem. You've added a second language by mistake and it's the same as the 1st one.
    Look at the bottom of your outline and you'll see "English" and "English-1". Delete "English-1" and re-build.

  • Error codes when installing elements 12

    Hi all,
    Who can help me with these errors. How can I make it right again. Very frustrating
    Exit Code: 7
    Please see specific errors below for troubleshooting. For example, ERROR: DF006, DF014 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 2 error(s)
    ----------- Payload: Adobe Photoshop Elements 12 12.0.0.0 {48C6BCD3-4F00-4CFE-BDD4-8D57C640B985} -----------
    ERROR: DF006: The path "/Applications/Adobe Photoshop Elements 12" already exists and is not a directory, Please rename or delete and retry(Seq 1)
    ERROR: DF014: Unable to create symlink "/Applications/Adobe Photoshop Elements 12/Adobe Photoshop Elements 12"(Seq 1)
    Thanks for the help
    Denise

    It has been installed bedore and then it suddenly did not work anymore. That's why tried to install it again, but unfortunatly did not work
    Verstuurd vanaf mijn iPhone
    Op 25 jun. 2014 om 22:14 heeft "Barbara B." <[email protected]> het volgende geschreven:
    error codes when installing elements 12
    created by Barbara B. in Photoshop Elements - View the full discussion
    Did you try to install before without removing anything that did get installed from your applications folder before trying again? You don't have the installer files in the applications folder, do you?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6497038#6497038
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • IDispatch error codes 5056, 1590, and 1557 makes hfm Srvr registration fail

    I have installed EPM 11.1.1.2 and configured everything successfully except for Financial Management. When configuring Financial Management the Server/Cluster registration fails and I can't deploy to the imbeded App Srvr.
    the hfm-config.log file shows the following Failed entries; How do I find out what IDispatch error codes 5056, 1590, and 1557 are?
    (Thu Jul 30 17:58:53 2009) Failed to register cluster epm. Line:1438 File: .\CHFMConfig.cpp Error code:0x800415c0 Error: IDispatch error #5056
    (Thu Jul 30 17:58:53 2009) Cluster registration failed. Line:1452 File: .\CHFMConfig.cpp Error code:0x80040836 Error: IDispatch error #1590
    (Thu Jul 30 17:57:50 2009) Successfully set the user to DCOM limits
    (Thu Jul 30 17:57:50 2009) Attempting to register the cluster/server
    (Thu Jul 30 17:58:53 2009) Failed to set register Servers and Clusters. Line:536 File: .\CHFMConfigUtil.cpp Error code:0x80040836 Error: IDispatch error #1590
    (Thu Jul 30 17:58:53 2009) General Error. Line:827 File: .\CHFMConfigUtil.cpp Error code:0x80040815 Error: IDispatch error #1557

  • Problem with installing and uninstalling applicati...

    hi all,
    I have a problem with installing or uninstalling apps on 808. When i try to install an application through Nokia suite or when trying to run the application file from the phone's memory the screen freezes and becomes unresponsive but the 3 phone buttons work just fine. I have to shut down the phone and the screen becomes responsive again. Anything available to help me wiith this situations as I cannot use any of the apps I have. Any help much appreciated.
    Regards
    Alex

    You are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
    I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
    Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps.

  • Same error code for two different errors

    I have a simple state machine with a few states, two of which are read ini file and read GPIB data. I also have an error handling state where I would like to handle all errors. Errors are checked for on each iteration of the loop, passed by shift register. However, I can't just unbundle the error cluster and wire the error code to a case structure because if the ini file doesn't exist (error code 7) I want to exit the program. But if I get error 7 from the gpib (Nonexistent GPIB interface) I want the program to continue running. What is the best way to track where the error is coming from so I know how to handle it when two error codes for different errors have the same error code value?
    Message Edited by for(imstuck) on 01-27-2010 03:47 PM
    CLA, LabVIEW Versions 2010-2013

    Another option is to check the existence of the file before opening the config file, then exit the program if nessecary. Relying on error codes might be a bad option.
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • Where to find LED error codes for Portege 4010?

    Hi,
    My Portege 4010 isn't working, and the AC indicator is blinking an error code (either 0xA or 0x50 depending if I should interpret the first bit as least or most significant). I've tried searching, and I've found a fairly detailed guide that includes these error codes for the Portege M100 and M300 (at  http://tim.id.au/laptops/toshiba/portege%20m100.pdf and http://tim.id.au/laptops/toshiba/portege%20m300.pdf) but I can't find anything for the 4010. So can anyone give me a location (ideally official Toshiba) for a document detailing the meaning of the error codes for my model?
    Thanks,
    Jes

    See for 'REP messages' in help menu.

  • I am unable to install itunes in my windows 7 laptap. Getting 2349 error code while installing itunes. Any suggestions to overcome?

    I am unable to install itunes in my windows 7 laptap. Getting 2349 error code while installing itunes. Any suggestions to overcome?

    Is this the error your gettings?
    If so, remove the installer, and redownload the itunes set-up installer
    www.apple.com/itunes/download
    Message was edited by: keeferaf

Maybe you are looking for

  • How to get Hibernate 3.2.5 running on OracleAS 10.1.3.1 / OC4J 10.1.3.2

    Hi all, I have installed the OracleAS 10.1.3.0 patched to OracleAS 10.1.3.1/OC4J 10.1.3.2. I am trying to get Hibernate 3.2.5 with Hibernate EntityManager 3.3.1 running on the server, but I am not able to succeed. I want to provide Hibernate as a sha

  • Does the picture print service actually work on iPhoto 6??

    Hello, this is the first time I order prints from iPhoto and so far I haven't been lucky. Yersterday I tried to order a few prints, I selected the sizes/quantities and then iPhoto uploaded the pictures and confirmed my order was successfully placed (

  • SimpleAgent doesn't show up in JConsole in RMX RMI demo

    I am going through the JMX tutorial at http://java.sun.com/developer/technicalArticles/J2SE/jmx.html. The local console works fine but when I try the RMI Connector example, SimpleAgent does not show up in the list of MBeans (only JMImplementation, ja

  • How to send automatic EMail from SQL or SAP B1

    hi experts as we are using SQL as DB i ned to send E-mails from sap system automatically but from SBO mailer  or Scheduler is not working from my side now i was planning to send emails from SQL can any one help me how to send emails automatically fro

  • No Video For Group Calls

    I have the latest version of Skype. The webcam I'm using is  "LiveCam Sync HD" from Creative. It works fine with Skype on an individual call, but will not work with groups. What is the reason, and how can I correct it? (Incidentally, my name above is