Error compiling imported themes

I have imported a theme file into my project. I tried then to
compile it by right clicking the .css file. There was no message
given. I tried doing it then at the command line, and I get a
strange error from the mxmlc compiler:
/Applications/Adobe\ Flex\ Builder\ 3/sdks/3.2.0/bin/mxmlc
-include-libraries=ReachOverActivitiesv2Shadow.swc
ReachOverActivitiesv2Shadow.css
Loading configuration file /Applications/Adobe Flex Builder
3/sdks/3.2.0/frameworks/flex-config.xml
/Users/wbathurs/Documents/Flex Builder
3/v1/src/assets/skins/ReachOverActivitiesv2Shadow.css(4): Error:
Unable to create source
ReachOverActivitiesv2Shadow__embed_css__138563797.
borderSkin: Embed(skinClass="ReachOverActivitiesv2Shadow");
Any ideas?

here is the WSDL file for reference
<definitions
name="FTPOrderReceive"
targetNamespace="http://xmlns.oracle.com/FTPOrderReceive"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:ns1="http://schemas.oracle.com/bpel/extension"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:client="http://xmlns.oracle.com/FTPOrderReceive"
>
<import namespace="http://schemas.oracle.com/bpel/extension" location="http://localhost:8889/orabpel/xmllib/RuntimeFault.wsdl"/>
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://xmlns.oracle.com/FTPOrderReceive" schemaLocation="FTPOrderReceive.xsd"/>
</schema>
</types>
</definitions>
No errors are shown for the file. I've read several posts that indicate this should work, but it is not playing. There must be something else that needs doing but I cannot figure it out. The generation of the various descriptors, deployment files etc does not seem to be quite hanging together in JDev.

Similar Messages

  • Error while importing theme created with Eclipse theme editor

    Hi,
    I am facing an error when I try to import a theme I created using the Eclipse Theme Editor plug-in. I created a theme and exported it. Then  when I try to import it, I get the error that "its.zip was not found in the archive". I check the exported zip file for theme and I see that there is only one zip file inside it "portal.zip". But if I export a theme from the portal, I get three zip files inside the archive - portal.zip, its.zip and ur.zip.
    Can't I use the theme I created using the plug-in in portal? Are they meant to be used in some other context? Or is there any setting to be done on the plug-in to make it generate the zip files  - its and ur ?
    Thanks in advance.
    Regards
    Ranjith

    Hi,
    It is used to brand webdynpro. and its a stand alone tool.. no need of any plug ins....
    This is the description I found under eclipse theme editor. its totally related to webdynpro.
    SAP presents applications to users in the SAP Enterprise Portal (SAP EP). You can change user interface themes with the "Portal Theme Editor" that is part of the Enterprise System Administration role.
    As some customers do not have the version of SAP Enterprise Portal that includes this Theme Editor , this version of the Theme Editor is offered as an unsupported, standalone tool from SDN.
    The Eclipse Theme Editor can be used to brand Web Dynpro.
    Comments and questions: Please use the Web Dynpro forum. Problems regarding the Eclipse Theme Editor reported via OSS will not be handled. As the tool comes as an unsupported version, bug fixes cannot be guaranteed in a timely fashion.
    Release information: The Eclipse Theme Editor will be released for each SAP NetWeaver stack. Please note that you can only use the Theme Editor version compatible with the same version Web Dynpro (for example, the SAP NetWeaver Stack 9 Theme Editor is only compatible with SAP NetWeaver Stack 9 Web Dynpro). When you upgrade Web Dynpro to a higher stack, you must also upgrade the SAP NetWeaver Stack 9 Eclipse Theme Editor and your themes to the SAP NetWeaver stack on which your Web Dynpro applications are running.
    here you can find how to edit themes in web dynpro using this eclipse theme editor..
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d2b1d790-0201-0010-25b7-d1fb059a8ad9
    regards,
    Pradeep

  • I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them.  Has anyone had a similar problem-.thanks

    I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them.  Has anyone had a similar problem….thanks

    If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

  • Compilation Error for import classes not found in generated Proxy Class

    Hi,
    We are generating java classes for the COM dll using JCOM com2java compiler.
    We are getting a compilation error for import class not found when compiling the
    generated Proxy java source code. It can't find the com.bea.jcom.Dispatch class that
    the generated Proxy java source code extends. It also can't find com.bea.jcom.Variant
    or com.bea.jcom.Param. These are interfaces or data types or classes used by COM
    library.
    I added weblogic.jar to my class path and the only Dispatch class i found inside
    the weblogic.jar is com.linar.jintegra.Dispatch;
    We have com objects for which we want to develop an EJB client to interface with
    the COM object using JCOM with Native Mode disabled.
    Any help on the compilation error..I tried changing the extends for Dispatch to com.linar.jintegra.Dispatch
    but the other errors are still there.
    To begin with, I think the generated code should not refer to any of the COM data
    types.
    Any help please.
    Thank you in advance,
    Regards,
    Rahul Srivastava
    [email protected]

    Hi,
    I resolved the other errors by changing all references from com.bea.jcom.Variant
    etc to com.linar.jintegra.class name..all were present under the com.linar.jintegra
    package.
    Thank you all anyways,
    Regards,
    rahul
    "Rahul Srivastava" <[email protected]> wrote:
    >
    Hi,
    We are generating java classes for the COM dll using JCOM com2java compiler.
    We are getting a compilation error for import class not found when compiling
    the
    generated Proxy java source code. It can't find the com.bea.jcom.Dispatch
    class that
    the generated Proxy java source code extends. It also can't find com.bea.jcom.Variant
    or com.bea.jcom.Param. These are interfaces or data types or classes used
    by COM
    library.
    I added weblogic.jar to my class path and the only Dispatch class i found
    inside
    the weblogic.jar is com.linar.jintegra.Dispatch;
    We have com objects for which we want to develop an EJB client to interface
    with
    the COM object using JCOM with Native Mode disabled.
    Any help on the compilation error..I tried changing the extends for Dispatch
    to com.linar.jintegra.Dispatch
    but the other errors are still there.
    To begin with, I think the generated code should not refer to any of the
    COM data
    types.
    Any help please.
    Thank you in advance,
    Regards,
    Rahul Srivastava
    [email protected]

  • I have iphoto 6 and my pictures are no longer showing.  I have tried importing them but it just give me an error msg. (file format not recognized) I have tried rebuilding the iphoto library but that doesn't work either. Any suggestions?

    I have iphoto 6 and my pictures are no longer showing.  I have tried importing them but it just give me an error msg. (file format not recognized) I have tried rebuilding the iphoto library but that doesn't work either. Any suggestions?

    How did you rebuild?
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
    2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 6* library:
    Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

  • [svn:fx-trunk] 10766: Re-commit compiler errors for other theme' s styles feature.

    Revision: 10766
    Author:   [email protected]
    Date:     2009-09-30 15:55:55 -0700 (Wed, 30 Sep 2009)
    Log Message:
    Re-commit compiler errors for other theme's styles feature. If Style metadata has a "themes" attribute, the style is only valid if that theme is applied.
    The Spark theme is applied by default. The halo theme can be specified as a compiler argument or by selecting the "MX Only" component set in Builder.
    All other themes need to be applied using theme+= instead of theme=. If you use theme= you will get warnings about styles used in CSS selectors, and errors if you use any theme-specific style as an attribute on an MXML tag.
    By default, styles that aren't valid for the current theme are errors. These can be changed to warnings with the report-invalid-styles-as-warnings compiler option.
    QE notes: Expect test breakage
    Doc notes: The new policy for themes needs to be documented.
    Bugs: none yet, but I'm sure there will be some...
    Reviewer: Ryan
    Tests run: checkintests, cyclone
    Is noteworthy for integration: Yes
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/framework/defaults.css
        flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/Button.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/ButtonBar.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/CalendarLayout.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/ComboBase.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/DateChooser.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/RadioButton.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/TextArea.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/ToolTip.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/Tree.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/VideoDisplay.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/colorPickerClasses/SwatchPan el.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/listClasses/ListBase.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/core/ScrollControlBase.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/CursorManager.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/ToolTipBorder.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/metadata/SkinStyles.as
        flex/sdk/trunk/frameworks/projects/halo/defaults.css
        flex/sdk/trunk/frameworks/projects/spark/defaults.css
        flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/SkinnableDataContainerSkin .mxml
        flex/sdk/trunk/frameworks/projects/sparkskins/src/SparkSkinsClasses.as
        flex/sdk/trunk/frameworks/tests/basicTests/BasicTests.css
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/common/CompilerConfiguration.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/common/DefaultsConfigurator.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/common/MxmlConfiguration.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StylesContainer.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/fxg/FXGCompiler.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/ImplementationCompiler.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/InterfaceCompiler.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/MxmlConfiguration.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/ComponentBuilder.jav a
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/AttributeHandler.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/DeclarationHandler.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/Type.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/TypeTable.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/MxmlDocument.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler_en.properties
        flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.java
    Added Paths:
        flex/sdk/trunk/frameworks/themes/Spark/spark.css
    Removed Paths:
        flex/sdk/trunk/frameworks/projects/sparkskins/src/mx/skins/spark/ApplicationBackground.as

    Revision: 10766
    Author:   [email protected]
    Date:     2009-09-30 15:55:55 -0700 (Wed, 30 Sep 2009)
    Log Message:
    Re-commit compiler errors for other theme's styles feature. If Style metadata has a "themes" attribute, the style is only valid if that theme is applied.
    The Spark theme is applied by default. The halo theme can be specified as a compiler argument or by selecting the "MX Only" component set in Builder.
    All other themes need to be applied using theme+= instead of theme=. If you use theme= you will get warnings about styles used in CSS selectors, and errors if you use any theme-specific style as an attribute on an MXML tag.
    By default, styles that aren't valid for the current theme are errors. These can be changed to warnings with the report-invalid-styles-as-warnings compiler option.
    QE notes: Expect test breakage
    Doc notes: The new policy for themes needs to be documented.
    Bugs: none yet, but I'm sure there will be some...
    Reviewer: Ryan
    Tests run: checkintests, cyclone
    Is noteworthy for integration: Yes
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/framework/defaults.css
        flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/Button.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/ButtonBar.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/CalendarLayout.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/ComboBase.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/DateChooser.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/RadioButton.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/TextArea.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/ToolTip.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/Tree.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/VideoDisplay.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/colorPickerClasses/SwatchPan el.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/listClasses/ListBase.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/core/ScrollControlBase.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/CursorManager.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/ToolTipBorder.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/metadata/SkinStyles.as
        flex/sdk/trunk/frameworks/projects/halo/defaults.css
        flex/sdk/trunk/frameworks/projects/spark/defaults.css
        flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/SkinnableDataContainerSkin .mxml
        flex/sdk/trunk/frameworks/projects/sparkskins/src/SparkSkinsClasses.as
        flex/sdk/trunk/frameworks/tests/basicTests/BasicTests.css
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/common/CompilerConfiguration.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/common/DefaultsConfigurator.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/common/MxmlConfiguration.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StylesContainer.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/fxg/FXGCompiler.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/ImplementationCompiler.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/InterfaceCompiler.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/MxmlConfiguration.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/ComponentBuilder.jav a
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/AttributeHandler.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/DeclarationHandler.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/Type.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/TypeTable.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/MxmlDocument.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler_en.properties
        flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.java
    Added Paths:
        flex/sdk/trunk/frameworks/themes/Spark/spark.css
    Removed Paths:
        flex/sdk/trunk/frameworks/projects/sparkskins/src/mx/skins/spark/ApplicationBackground.as

  • When i try to import my pictures from my camera i get an error saying unreadable files. What do i do to import them?

    When i try to import my pictures from my camera i get an error saying unreadable files. What do i do to import them?

    First launch Image Capture, located in the Applications folder, and see if you can upload the phiotos to a folder on the Desktop.  If you can then import the folder into iPhoto.
    Then reformat the memory card using the camera's format option, take a few test photos and try importing into iPhoto again.
    OT

  • One cause for "Error Compiling Movie: Unknown Error"

    I just finished a huge promotional video project, one which was fraught with problems.
    To start out with, most of my interview footage was RED Epic material, and my b-roll was comprised of a combination of RED Epic (some at 4kHD and some at 5k), RED ONE (some at 4k, some at 3k), XDCAM-EX 1080p, HDV 1080i, Sony AVCHD 1080p, previously exported Vimeo HD h.264 material, and still shots. Needless to say, quite a mess of codecs and odd file types to combine into one project.
    Since much of my b-roll was 1080p, I decided to do my entire edit on a 1080p timeline; however, since all my interview footage was RED, I decided to use a RED Epic 1080p timeline. In doing so, I discovered something important about Premiere, and I don't know if this is a bug, or if it's meant to work this way: when you put 5k RED Epic material on a 1080p timeline and use the zoom controls in the motion effects panel to bring it to size, and attempt to export, you'll get the "Error Compiling Movie: Unknown Error" every time. This may happen with other types of footage that's too big for the timeline too, i'm not sure. However, when you instead right click on the clip and use the "scale to frame size" command, it exports just fine, with no errors.
    I also discovered that (at least with my setup), PrPro can't handle large stills on the timeline; I contiually got OpenGL crash errors until I resized all my images in Photoshop to be no more than 1920px wide.
    The promo video is 11:30, and comprised of five segments. I edited each segment (interview and b-roll) in it's own sequence, and then nested the sequences along with the transition/motion graphics/title slides between them on my master sequence. However, I kept getting crashes and freezes when attempting to export that master sequence which I couldn't explain. Ultimately I had to export each of the individual sequences as a Lagarith UT AVI file, and then import that file back in and place it in the master sequence where the nested sequence had been. Once that was done it exported fine, so I'm still not sure what the problems were, since each individaul sequence exported okay, and the master exported just fine after replacing the nested sequences with the Lagarith clips...
    Anyway, I think I've got a pretty good promo done, and it's definitely a TON better than our last one. When I get it online I'll post a link over in the Lounge and ask for feedback...

    So, I ran into this the first time recently. I discovered it when I copied an adjustment layer for quick grading with an RGB Color Corrector and Color Balance effects in it from a rehearsal cut of a short film.The effects worked fine and rendered out without issue. I imported the sequence into my 'final' cut so I could reuse the titles and adjustment layer. I copied the adjustment layer to the new rough cut of the final sequence and ran into this error when I tried to render it, but only after applying the adjustment layer. I found that if I turned off the Color Balance, the sequence rendered fine. I found that if I moved the Color Balance above the RGB Color Corrector, the effect of the RGB effect completely disappeared AND it rendered correctly (both effects turned on) - so reversing the order worked, but effects were weird. I also found that if I added ANY non-GPU accelerated effects to the RGB Color Corrector that I'd get the same compile error (unknown).
    I went through and deleted clips until I got to 0 on the timeline, added a new one back on, and it still wouldn't render. So, I created an entirely NEW sequence, copied all video and audio (not adjustment layer) from the original failing rough cut of the final sequence, and pasted it into this new sequence. I also copied the adjustment layer again from the rehearsal cut into this new sequence and it is rendering just fine.
    HOURS WASTED DOING THIS! It would be awesome if Adobe actually tested their products before releasing them instead of forcing us to do it for them. My project consisted of about 30-40 different clips and audio, all from the same DSLR (Nikon D810), nothing fancy, two effects in an adjustment layer applied to the entire sequence, and Premiere couldn't handle it. Given this and some of the comments I read while troubleshooting this on this forum, gives me pause in trusting Adobe products for any real work that has a deadline (unless, of course, you build in the required Adobe testing time into your budget).
    So, just another data point; something else to try. Create a new sequence, and copy everything from your non-working one to it, and see if this will jump-start Premier. Worked for me. Good luck.

  • Export Error. Error compiling movie. Disk Full.

    I have the following error since CS6 when exporting some videos: Export Error. Error compiling movie. Disk Full.
    All my drives have plenty of space, NTFS 7200rpm, everything was fine with CS5.5. Same problem with Encoder or Premiere Pro.
    Much of the stuff I export is going fine but I have this error with some sequences and formats.
    It always crash to this error when exporting sequences with "Match Sequence Settings".
    For one of my projects, when exporting to wmv, out of 6 sequences one always crash to Export Error. Error compiling movie. Disk Full.
    If I encode those sequences to mpeg2, everything is fine.
    I installed the new update this morning but it doesn't help.

    Hi, since my last post there has been no activity on this thread, so...
    Has anyone found a workaround?  I find it incredibly inconvenient and unforgivable that I get this error when trying to export a movie in PPCS6 using "Match Sequence Settings".  Some facts:
    1. I always get this error when trying to export from PPCS6 using match sequence settings.  It happens with all movies.  Starting a new sequence doesn't change it
    2. I never get this error if I use another encoding option
    3. My disk is not full
    4. It happens whether I use software engine or GPU acceleration (and also if I delete the previews)
    5. It happens on both the PC and MAC versions of PPCS6.  With sequences created natively on each machine and imported one to the other.
    6. If I import the sequence into CS5, then hey presto, it works without error.  At the moment that is my workaround, but it is not at all acceptable that I have to do this.
    7. The sequences were all created in CS6.  None of them were imported from another version
    8. My source video is 1080p AVCHD footage
    Any further thoughts on how to deal with this really frustrating and crippling new bug in CS6 would be incredibly welcome.

  • Unknown error compiling movie - tiny sections export fine - no one bad clip

    This week I've been dealing with a huge pain exporting a 6 minute video on my retina macbook pro. The sequence is 720p 24fps (23.976) and contains a mix of 720p & 1080p (scaled) AVCHD footage, a couple of 1080p GoPro shots, some 1080p time-lapse clips (quicktime h.264) and some mp3 files.
    Earlier I was having trouble with playback in premiere, but by replacing one bad clip and rendering the rest in small chunks I am now able to play back the sequence with zero issues within premiere.
    However, when I go to export the whole movie, or even a significant chunk, either the system starts spinning its wheels partway through export or I get "error compiling movie - unknown error."
    The workaround I have found when that happens is to restart premiere (often having to force quit) and then try to export a smaller chunk. (Restarting seems to be necessary after an export has failed). Sometimes the chunks become ridiculously small, but there is no one clip or section that won't export if the clips are small enough. I have also tried cleaning the media cache trashing the preferences, neither of which have changed anything.
    Even when I export using the sequence settings of the sequence (which has already been rendered and plays fine within premiere) the problem persists.
    My first question is: how can there be an issue exporting a video with identical settings to a sequence that has already been rendered and plays back fine?? Am I wrong in understanding that no conversion is required in that case? Clearly there is something about the process that I don't understand.
    My second question is, if no one clip or clips are to blame, are there any likely culprits in my system? Is there perhaps a less time-consuming workaround?
    Finally I want to ask: what good does it do to allow users to put different types of media into one timeline if they can never export it?!?!
    This is super frustrating, thank you for any help or insight.

    So, I ran into this the first time recently. I discovered it when I copied an adjustment layer for quick grading with an RGB Color Corrector and Color Balance effects in it from a rehearsal cut of a short film.The effects worked fine and rendered out without issue. I imported the sequence into my 'final' cut so I could reuse the titles and adjustment layer. I copied the adjustment layer to the new rough cut of the final sequence and ran into this error when I tried to render it, but only after applying the adjustment layer. I found that if I turned off the Color Balance, the sequence rendered fine. I found that if I moved the Color Balance above the RGB Color Corrector, the effect of the RGB effect completely disappeared AND it rendered correctly (both effects turned on) - so reversing the order worked, but effects were weird. I also found that if I added ANY non-GPU accelerated effects to the RGB Color Corrector that I'd get the same compile error (unknown).
    I went through and deleted clips until I got to 0 on the timeline, added a new one back on, and it still wouldn't render. So, I created an entirely NEW sequence, copied all video and audio (not adjustment layer) from the original failing rough cut of the final sequence, and pasted it into this new sequence. I also copied the adjustment layer again from the rehearsal cut into this new sequence and it is rendering just fine.
    HOURS WASTED DOING THIS! It would be awesome if Adobe actually tested their products before releasing them instead of forcing us to do it for them. My project consisted of about 30-40 different clips and audio, all from the same DSLR (Nikon D810), nothing fancy, two effects in an adjustment layer applied to the entire sequence, and Premiere couldn't handle it. Given this and some of the comments I read while troubleshooting this on this forum, gives me pause in trusting Adobe products for any real work that has a deadline (unless, of course, you build in the required Adobe testing time into your budget).
    So, just another data point; something else to try. Create a new sequence, and copy everything from your non-working one to it, and see if this will jump-start Premier. Worked for me. Good luck.

  • Error : Double import : Connection

    Hi
    I Wanna use metadata connection as well as sql connection in a Javaclient , so I imported the java.sql.connection package and oracle.dss.*.mdmconnection .But Iam getting an error while compiling as follows Error :Double import : connection
    How can I access both metadata and RDBMS data from javaclient using a single connection.
    Jithesh

    Don't import one of them and use it fully qualified.
    i.e. don't import java.sql.Connection and then later do something like:
    java.sql.Connection c = DriverManager.getConnection(...);
    Hope this helps,
    Rob

  • Error Compiling Movie.  Unknown Error.  Premiere Pro export failure

    Error Compiling Movie.  Unknown Error.  I get this message when trying to export my timeline to any format.  It exports for a while then I get this message.  When I try to export using media encoder it just gives me the sheep sound.  I'm starting to hate that sheep.
    Does anyone know how to figure out why it throws up this error message and what the solution is to get around it?  I've wasted countless hours trying to figure out a work around.  I can't just scrap this project it's taken me weeks.
    I've been able to export just fine dozens of times prior to this so I'm not sure it matters what my specs are but here goes:
    custom built PC with windows 7pro SP1
    Intel(R) Core(TM) i7-2600K CPU @ 3.4GHz 3.7 GHz
    16GB ram
    64-bit OS

    After implementing many suggestions here I was able to export the 9min project successfully.  I need to take you all out to dinner. 
    I'm not sure which suggestions did the trick but I have a feeling it was a combination of ideas that did the trick.  Here is a breakdown of what I did to modify the project in order to get it to successfully export:
    1.) Reset all stills in the motion tab to original settings & then right clicked on them in the timeline and selected "scale to frame size".
    2.) Replaced all nested files with the original tracks.
    3.) Changed the sequence settings (changed Editing Mode to Custom and Under Video Previews Section > Select Preview File Format as Microsoft AVI, Codec Uncompressed.
    I had to re-render all previews after changing the sequence settings and I got I/O errors during that process but restarting Adobe Premiere CC somehow solved those errors.  Many times during the process of modifying the timeline (based on items 1-3 previously mentioned) I had to restart Premiere due to a loss of preview screen and inability to render things out.  In the end I was able to get it to successfully export so again I thank you all.  This was a VERY important project for me and I'm serious about taking you all out to dinner

  • Javac(1.4.2) gives error in import statement

    Hi All,
    I am facing a surprising problem. I have 2 java class files. I write the import statement for second one in the first one. There is no package & these are in the same directory. I have compiled the second one. But when I try to compile the First one. Javac throws error at import statement like below :
    D:\Clubs\oct\6>javac -d . ManojTest.java
    ManojTest.java:1: '.' expected
    import SessionBean;
    ^
    1 error
    My Java Files are as below :
    import SessionBean;
    public class ManojTest
         public static void main(String args[])
    //ManojTest.java
    public class SessionBean
         public static void main(String args[])
    //SessionBean.java
    I have compiled SessionBean.java successfully but when I try to compile ManojTest.java I get error mentioned above.
    However this probelm comes when I use j2se 1.4.2.. but works in j2se 1.3.1..
    Another way could be I use package structure.
    But I can't do any of these, as I have to port my big project to j2se1.4.2.. from j2se1.3.1.. (Live project is running on Tomcat).
    Problems is similar in Unix & Windows both.
    Is this javac compiler issue or there is some setting which I can make.
    I have already included . (dot) in PATH & CLASSPATH environment varibales.
    Please help me out if there is any way around this, as i am stuck up in between
    thank you
    Manoj :confused:

    Use a package and then add that package in your classpathOr don't use a package, leave the file in the default (noname) package, and don't use the import statement. Java will find it in the default package without the import.
    Explicit import statements from the default package are no longer allowed

  • Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18

    Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18 while using Adobe Premiere Pro.
    Process:         Adobe Premiere Pro CC 2014
    Path: /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
    Identifier: com.adobe.AdobePremierePro
    Version:         8.1.0 (8.1.0)
    Code Type: X86-64 (Native)
    Parent Process: launchd [2538]
    Responsible:     Adobe Premiere Pro CC 2014
    Date/Time: 2015-01-06 14:04:23.500 -0700
    OS Version:      Mac OS X 10.9.2 (13C64)
    Report Version:  11
    Crashed Thread: 55  Dispatch queue: com.apple.root.default-priority
    Exception Type: EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
    Customer created test export with 777 permissions and set mount parameters to the following:
    mount_nfs -o vers=3,tcp,rdirplus,intr,nolocks,async,rsize=32768,wsize=32768
      -- Original mount options:
         General mount flags: 0x40 async
         NFS parameters: vers=3,tcp,nolocks,rsize=32768,wsize=32768,rdirplus
      -- Current mount parameters:
         General mount flags: 0x4000058 async,nodev,nosuid multilabel
         NFS parameters: vers=3,tcp,port=2049,nomntudp,hard,nointr,noresvport,negnamecache,callumnt,nolocks,quota, rsize=32768,wsize=32768,readahead=16,dsize=32768,rdirplus,nodumbtimr,timeo=10,maxgroups=16 ,acregmin=5,acregmax=60,acdirmin=5,acdirmax=60,nomutejukebox,nonfc,sec=sys
    The pcap shows once the movie is created a lockup call is responded from Isilon with Error: NFS3ERR_NOENT
    478         V3 CREATE Call (Reply In 479), DH: 0xea5f731c/QBRSN-0-0-1.mov Mode: UNCHECKED
    479         V3 CREATE Reply (Call In 478)
    484         V3 LOOKUP Call (Reply In 485), DH: 0xea5f731c/._QBRSN-0-0-1.mov
    485        V3 LOOKUP Reply (Call In 484) Error: NFS3ERR_NOENT
    V3 LOOKUP Reply (Call In ....) Error: NFS3ERR_NOENT  -   This is by design of OneFS, we coalesce files and then flush them out to disk which is why the commit time is accurate but the file is not immediately available. however when an async option is used within the mount options this should be avoided if writing asynchronously to the cluster.  Has anyone else seen this behavior lately? (current workaround is to store locally and transfer to the cluster via Finder)

    That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard.  FAT32 only allows for file sizes up to 2 gigs.  And as soon as it reaches that...I would get that error.  I don't know if that is why you are getting that error...but it would be easy to check.  1) are you generating a file that is over 2 gigs?  2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".

  • I just downloaded Yosemite and all my iPhotos have disappeared! I tried importing them from the photo library but it said there wasn't enough space on my hard drive which is rubbish, because they were there before. How do I get them back to iPhoto?

    I just downloaded Yosemite and all my iPhotos have disappeared! I tried importing them from the photo library but it said there wasn't enough space on my hard drive which is rubbish, because they were there before. How do I get them back to iPhoto?

    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

Maybe you are looking for

  • What's the best way to animate a photo on top of a clip?

    If any Shake users consistently and easily keyframe-animate either the Move2D node or the Pan node, I would be most grateful to hear how you do it. I am trying to get a small photograph to move in various places on top of a video clip playing in the

  • Refresh tool and table name containing database name in Mysql

    Hi, when refreshing the database schema and my table name contains a database name (for example "my_other_db.my_other_table"), the refresh tool never sees weather "my_other_db.my_other_table" already exists or not. so it always generates a create-tab

  • Mouse icon disappears!

    Sometimes when I am using photoshop CS3 or flash 9 standalone (and other applications too) the mouse icon disappears. In photoshop when I move my mouse out of the canvas it goes away, to get the pointer back I hit command-tab to bring up the app swit

  • HT4623 Why my iPhone 5 is not Comparable with my MacBook Pro when try to play music by Bluetooth

    Why my iPhone 5 is not Comparable with my MacBook Pro when try to play music by Bluetooth can anyone help

  • Event triggers from HANA to sharepoint

    Hi All, Is it possible to create a trigger in HANA that on creation of a new row in a particular table, creates an event that goes to a sharepoint portal  and triggers a mail and a push notification to MS BI mobile users? Please let me know how that