ERROR: Dequeue Element in Acquire Semaphore

Hi
I'm working with TS4.1 + LV8.6
Here's the full error I'm getting:
A Run-time error has occurred in step: xMCP Alive?
Sequence: MainSequence
SequenceFile: R:\HLXC1536\Seq\FCU.seq
Error Message: Dequeue Element in Acquire Semaphore.vi:1->NI_InternetTK_Core_VIs.lvlib:Telnet
Read.vi:1->TelnetReadWrite.vi->TelnetReadWrite.vi.ProxyCaller
Error Code: 1
Could somebody please give me a hint to what sort of problem I'm looking at?
The error only shows up when I select to run another UUT (from the preUUT sequence). If I select no and let the sequential model finish the test, it will not happen on the next run.
The error itself is in a ReadWrite Telnet vi which works fine. It happens on the first time it is used after the open telnet vi. Again, it only happens when I select 'Yes' on the question 'run another UUT'.
And thought?
Thanks
Rafi

Rafi,
In your ReadWriteTelnet VI, are you using all four semaphore VIs (obtain semaphore reference, acquire semaphore, release semaphore, release semaphore reference)? or are you passing in the semaphore reference from somewhere else? Just make sure you are releasing the semaphore properly and the semaphore reference (either in this VI or at the end of your sequence) properly. The fact that this only happens on the second UUT seems to suggest that there is a problem with your references not being closed properly.
Eric B.
National Instruments

Similar Messages

Acquire semaphore gives error Code = 0

I have incorporated a semaphore into our software. The semaphore protection works fine for a little while then gives a mysterious error code = 0. From that point on, no semaphore operations will work correctly. Has anyone ever seen this error? Any clue what it might mean. There is no message included with the error.
During Debugging I incorporated a mechanism to destroy that semaphore and get a new one. I found that I can create a new semaphore but when the new semaphore is used, the reference is invalid. I am using unique named semaphores. I'm thinking that once the error occurs, the semaphore core is somehow corrupted.
This is occurring in built code running on windows server 2003.
Jim West
Summitek Instruments

I'm not following the reasoning that there is a race condition. It seems to me that if the semaphore works as advertised... meaning that the "Test and Set" action is correct. There can never be a race condition of the kind that multiple processes lock the same semaphore.
In my webserver, there are two pieces to the puzzle. The server that creates/destroys the semaphore and the processes that acquire/release the semaphore.
The main server, which is always running, creates a named semaphore. Places that reference in a global. Let's called it REF. On shutdown, the semaphore is destroyed.
When running, a user requests a web page which then spawns off another handler process using a VI template (VIT). Within this vi instance, the REF is used to Acquire the semaphore, do the protected action, and release the semaphore. This will happen hundreds of times with no error. Then, at some point an acquire is called and the acquire semaphore times out. You can be sure that I have instrumented the code in such a way to tell me if a release failed or some other error.
One possibility is that the VIT instance spontaneously exits after the semaphore is acquired. I don't believe that this is happening but there would not be any way to 'log' that behaviour.
It is possible that multiple VITs will attempt to acquire the semaphore using REF. But that is why I am using the semaphore, to stack up the acquires in a methodology similar to stacking on non-reentrant vis.
Jim West

Why do i get error 1122 at dequeue element in consumer loop when i hit stop button

when i hit stop button from vi, the producer loop stops, the consumer loop gets an error and stops without reading all the elements and then my check queue status loop continues to run becuase it never goes to 0.
Any help?
Solved!
Go to Solution.
Attachments:
READ SIC AND LOG.vi ‏48 KB

matt198717 wrote:
i believe this is what you were talking about. If youve got any advice or pointers for this VI please let me know.
1. Your consumer loop should be using the Dequeue Elements.
2. Your consumer loop should actually be releasing the queue in the STOP case.
3. There is also no need for the polling to see how many elements are left in the queue.
4. Your wait in the producer loop shold only be when there is no data in the buffer (you have it in the wrong case).
5. Do not use the value from the Bytes At Port to tell the VISA Read how many bytes to read. You tell the VISA Read to read more bytes than you would ever expect the message to be. Let the termination character stop the read.
6. Use a VISA read right after intializing your port to sync up your messages.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Serial Port Producer Consumer.png ‏32 KB

Command requires GPIB Controller to be Controller in Charge on dequeue element

I have some funky stuff going on in the attached VI. What the VI does is simply to log data to a text file. It is built up as a state machine. This VI's Create state is called from a mainVI (with the help of named queues). I get more than one error and it seems completely random.The error usually occurs if I stop the mainVI, then starts it again. So the second (or following) times the DP VI is called, I get random errors such as the two below:
Error 1 occurred at Dequeue Element in DP.vi->PSS.vi
Possible reason(s):
LabVIEW: An input parameter is invalid.
NI-488: Command requires GPIB Controller to be Controller in Charge.
Error 1 occurred at Close File in DP.vi->PSS.vi
Possible reason(s):
LabVIEW: An input parameter is invalid.
NI-488: Command requires GPIB Controller to be Controller in Charge.
Why is this? I don't even have a GPIB controller?
Solved!
Go to Solution.
Attachments:
DP.vi ‏61 KB

Siniz wrote:
blawson, I think you found the error!
So shift registers only gets uninitialized again if I close the actual VI, and not when I start executing it again? So in reality, they actually behave like real shift registers? I found two solutions to this problem.
1) To initialize the error shift register with an empty error constant.
2) To remove the wire from the shift register to the Write to Text File. This works since I always call the Create state first.
Which one would you recommend?
Also, what is the reason to keep the typedef strict? I have seen non-strict in other code.
Generally you should always explicitly initialize your shift registers unless you want to retain the values from one execution to the next. This is required for Action Engines but in most other cases you should use initialized shift registers to avoid side effects like you encountered in this application.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Dequeue   elements from an apply - queue table

hi Everyone?
I'm tried dequeue elements from a queue table. This one, is associated to an apply streams process. I'd wrote this procedure to test a manual dequeue, but this error message appears :
ORA-25228: timeout or end-of-fetch during message dequeue from STADMIN.Q_APP_SELECTS_FROM_CRM
The queue is not empty
Help me please... thank you
The Procedure code is:
create or replace procedure str_clean_queue (cola in varchar2, tabla in varchar2, comando in varchar2) is
next_trans EXCEPTION;
pragma exception_init (next_trans, -25235);
no_messages EXCEPTION;
pragma exception_init (no_messages, -25228);
dequeueOpt dbms_aq.dequeue_options_t;
message_properties dbms_aq.message_properties_t;
message SYS.ANYDATA;
msgid raw(16);
newMess boolean;
lcr SYS.LCR$_ROW_RECORD;
a number :=0;
begin
dequeueOpt.CONSUMER_NAME := 'APP_SELECTS_FROM_CRM';
dequeueOpt.DEQUEUE_MODE := DBMS_AQ.LOCKED;
dequeueOpt.NAVIGATION := DBMS_AQ.FIRST_MESSAGE;
dequeueOpt.VISIBILITY := DBMS_AQ.IMMEDIATE;
dequeueOpt.WAIT :=10;
dequeueOpt.MSGID := null;
newMess:=True;
while (newMess) loop
begin
DBMS_AQ.DEQUEUE (
queue_name => 'STADMIN.'|| cola,
dequeue_options => dequeueOpt,
message_properties => message_properties,
payload => message,
msgid => msgid);
-- analizamos lo que llego en el payload
lcr := DBMS_STREAMS.CONVERT_ANYDATA_TO_LCR_ROW(message);
if (lcr.get_command_type = comando AND
lcr.get_object_name = tabla AND
lcr.get_object_owner = 'DBADMIN') then
-- hacer desaparecer el lcr de la cola
dequeueOpt.DEQUEUE_MODE := DBMS_AQ.REMOVE;
dequeueOpt.MSGID := msgid;
DBMS_AQ.DEQUEUE (
queue_name => 'STADMIN.'|| cola,
dequeue_options => dequeueOpt,
message_properties => message_properties,
payload => message,
msgid => msgid);
a:=a+1;
end if;
dbms_output.put_line(a);
exception
WHEN next_trans THEN
dequeueOpt.navigation := DBMS_AQ.NEXT_TRANSACTION;
WHEN no_messages THEN
dbms_output.put_line(sqlerrm);
newMess := FALSE;
end;
end loop;
end str_clean_queue;

Hello,
as you wrote you already have a code snippet with DBMS_AQ.DEQUEUE of an exception queue.
Wrap this DEQUEUE in an infinite loop (LOOP ... END LOOP). In order to have this procedure as an autonomous session
you can start it as a database job:
DECLARE
   v_jobno NUMBER(6);
BEGIN
    DBMS_JOB.SUBMIT( v_jobno,
                    'BEGIN <your module>; END;',
                    SYSDATE, NULL );
    COMMIT;
END;
/Kind regards,
WoG

"No Disk" Error (premiere elements 11)

I have successfully installed Adobe Premiere Elements 11 on my PC:
     Dell XPS 8300
     Intel Core i7-2600 Quad Core (3.4 GHz, 8MB Cache)
     • 1GB Radeon HD 6450 Graphics
     • 16GB DDR3 1333 RAM
     • 1TB 7,200RPM Hard Drive (2 x 500GB RAID 0)
     • Windows 7 Home Premium 64-Bit
When I open the application and click "New Project" I get the following error message:
AdobePremiereElements.exe - No Disk
There is no disk in the drive. Please insert a disk into drive
     \Devices\harddisk2\DR3
I can "cancel", "try again", or "continue". The only thing that works is to hit "cancel" (several times). Premiere Elements will then open, but the error message will keep recurring.   Adobe Support (Chat) has not been much help.
Anyone else come across this? This seems to be a common error in earlier versions (version 9), but I can't seem to find any good solution to it.   HELP!!!!
UPDATE:   Just as an FYI..while it's possible (but doubtful) there is preloaded software interfering, there is no other software (or viruses) installed on this computer.
Message was edited by: [email protected]

Boomps, I installed from here and it worked fine:     http://helpx.adobe.com/premiere-elements/kb/installing-smartsound.html There are even step-by-step instructions. Good luck.
Date: Mon, 7 Jan 2013 04:46:21 -0700
From: [email protected]
To: [email protected]
Subject: "No Disk" Error (premiere elements 11)
    Re: "No Disk" Error (premiere elements 11)
    created by BoompsXXX in Premiere Elements - View the full discussion
Not an answer!! I am new to this. I get the same error message and from what I can gather reading the traffic, I have to reinstall Smart sound. Can anyone help a simpleton. I searched the DVD for all files referencing Smart sount, there is plenty. I don't really understand how I reinstall and what??Any help would be great!!ThanksTara
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4973936#4973936
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4973936#4973936
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4973936#4973936. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

XML Parsing Error: no element found Location:Line Number 1, Column 1:

Hi,
i have a servlet code in which i am using bouncy castle encryption algorithm , if i tried to run that servlet on embeded weblogic server than my servlet works fine without error.
but if i deploy same Servlet code on SOA domain console than i get following error.
XML Parsing Error: no element found
Location: http://localhost:7001/Encryption-PGPEncrypt-context-root/pgpservlet
Line Number 1, Column 1:
Please help me friends...

Hi Chandra,
Based on my research, the error message is only generated by FireFox when the render page is blank in Internet. For some reason, .NET generates a response type of "application/xml" when it creates an empty page. Firefox parses the file as XML and finding
no root element, spits out the error message.
Also, based on your description, the other sites are opened correctly, the issue only happened in Central Administration(CA). This means the SharePoint services are working fine.
Since this issue only occurred in the CA, it might be due the application pool for the CA is corrupted. Please try to restart the application pool for the CA to resove the issue:
1. Open Internet Information Service(IIS)
2. List the application pools
3. Select the application pool used for the CA
4. Stop it, and then start it again.
Note, if the application pool is running in Classic mode, please change it to be Integrated mode.
Additionally, I found a similar thread, which may help you too:
http://social.msdn.microsoft.com/Forums/en/sharepoint2010general/thread/824d7dda-db03-452b-99c4-531c5c576396
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

XML Parsing Error: no element found Line Number 1, Column 1:

Hi All,
I have deployed EAR on my standalone server using JDEV 11.1.1.6.0. I am able to get the WSRP portlet producer page on
http://<server>:7001/contextRoot. But when i try to click on any of the WSDL URL it gives me "XML Parsing Error: no element found Line Number 1, Column 1:"
and from IE it gives me: XML document must have a top level element. Error processing resource
there can be a issue with the WSRPContainer.jar file. So i have remove it from my deployment profile, EAR and lib/classpath files.
Can you please suggest a workaround.
Regards,
ND
Edited by: ND on Dec 4, 2012 9:57 PM

Hi All,
this error normally comes when the WLS domain is not not properly created. if you get some exception for ./provesecurity.sh file while creating the domain, then the XML error comes.
I did not went into the depth but figured out a workaround: restart the VM/hosted box and then create the domain, remember to use diff port name while creating it from the domain creation script.
Regards,
ND

XML Parsing Error: no element found In BI Publisher

Hi Gurus,
I tried to get XML output for a Data Model which was based on SQL queries.
But I got the following error in Firefox
XML Parsing Error: no element found
Location: http://localhost:9704/xmlpserver/servlet/xdo
Line Number 4, Column 1:
In IE I got an other error:
There is no end tag for DATA_SET
Any ideas?
Many thanks
Laszlo

Hi,
I use 11g.
I tried to create element link when I got this error.
Now I am using groupink.
Without using bind variable I got result (Cartesian product)
However if i created and used bind variable I got the same error
this is a dept data set:
select     "DEPARTMENTS"."DEPARTMENT_ID" as DEPTNO,
     "DEPARTMENTS"."DEPARTMENT_NAME" as "DEPARTMENT_NAME",
     "DEPARTMENTS"."LOCATION_ID" as "LOCATION_ID",
     "DEPARTMENTS"."MANAGER_ID" as "MANAGER_ID"
from     "HR"."DEPARTMENTS" "DEPARTMENTS"
this is the emp data set:
select     "EMPLOYEES"."COMMISSION_PCT" as "COMMISSION_PCT",
     "EMPLOYEES"."DEPARTMENT_ID" as "DEPARTMENT_ID",
     "EMPLOYEES"."EMAIL" as "EMAIL",
     "EMPLOYEES"."EMPLOYEE_ID" as "EMPLOYEE_ID",
     "EMPLOYEES"."FIRST_NAME" as "FIRST_NAME",
     "EMPLOYEES"."HIRE_DATE" as "HIRE_DATE",
     "EMPLOYEES"."JOB_ID" as "JOB_ID",
     "EMPLOYEES"."LAST_NAME" as "LAST_NAME",
     "EMPLOYEES"."MANAGER_ID" as "MANAGER_ID"
from     "HR"."EMPLOYEES" "EMPLOYEES"
WHERE "EMPLOYEES"."DEPARTMENT_ID" =:DEPTNO
Thanks for any tip!
Laszlo

Error rendering element. Exception: ORA-00942: table or view does not exist

Guru,
We are maintaining 10 internal Database through OEM 10g and using seesded reports.
When we try to create simple custom reports against one of the Target database , its failing with following error message ,
Query : select * from v$database
Error rendering element.
Exception: ORA-00942: table or view does not exist
select * from dual & v$session working ( But query execution happeniing from Reposistory Database not from Target instance )
Note:
I have reviewed thred "getting ORA-00942 while running report in GC"
Please give some light .
Regards,
Raju

This is an EM related question so I would suggest you post in the appropriate space "Enterprise Manager" -- https://forums.oracle.com/community/developer/english/enterprise_management/enterprise_manager/enterprise_manager_6
You may also review (In Grid Control 10.2, Creating a Report to Query 'V$SESSION 'Fails: 'Error Rendering Element. Exception: ORA-00942 Table Or View Does Not Exist' (Doc ID 356755.1)) and implement the solution for v$database
Thanks,
Hussein

On closing Photoshop CC, I am getting an error message on screen that read's "Selective Palette error: no element found at line 1. Are you able to assist with this problem?

Can anyone shed some light on this error message I am getting upon closing Photoshop CC
I am getting an error message on screen that read's "Selective Palette error: no element found at line 1. Are you able to assist with this problem?

Same issue here in WI and for me it was at 6:36p CST.
I'm changed my password, removed iCloud from my phone ... tried 3G and WIFI with no luck. I also cannot check it on my Mac or iPad. I was able to get contacts and calenders back on my phone but no mail yet.
Did the whole Apple support thing and apparently I'm part of the 1%
EDIT: Question: are all of you former MobileMe users as well? Just wondering because I know there were going to be some changes as they completely move MobileMe over to iCloud and drop the "extra" services. I just can't remember if it was just a single cut off date or a series of dates. THAT email is stuck in my iCloud folders.

BPM error:Container element in step transformation is not initialized

Hello Experts,
I am new to the concept of BPM.
I'm trying to create an integration process in which I'm taking an Idoc and processing it in many ways. The process contains many transformation steps. There two such transformation steps which have been placed in block step in a fork. And i get this error: Container element XXX in step transformation is not initialized
What could be the problem?
Regards,
Akhil

Hi
if u are getting the messaga with red sigh then it means it will craete the error while running the scenario.
but if it is in blue then i think it will not create any error.
the meaning of that statement is that the container u have defind is not used anywhere. it is just giving u a warning message.
Thanks
Rinku

Error: Invalid element 'servlet' in content of 'web-app'

Hi,
I m working on a project that includes JSPs, whenever I wanna add JSP to my project it shows following compilation error:
Invalid element 'servlet' in content of 'web-app', expected elements '[error-page, taglib, resource-env-ref, resource-ref, security-constraint, login-config, security-role, env-entry, ejb-ref, ejb-local-ref]'
I have thoroughly checked the web.xml. It is perfectly alright. It is as follows:
<?xml version = '1.0' encoding = 'windows-1252'?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<description>Empty web.xml file for Web Application</description>
<session-config>
<session-timeout>30</session-timeout>
</session-config>
<mime-mapping>
<extension>html</extension>
<mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
<extension>txt</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
<welcome-file-list>
<welcome-file>index.jsp</welcome-file>
<welcome-file>index.html</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>myServlet</servlet-name>
<servlet-class>com.project.MainServlet</servlet-class>
<init-param>
Long postings are being truncated to ~1 kB at this time.

The Complete web.xml is as follows:
<?xml version = '1.0' encoding = 'windows-1252'?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<description>Empty web.xml file for Web Application</description>
<session-config>
<session-timeout>30</session-timeout>
</session-config>
<mime-mapping>
<extension>html</extension>
<mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
<extension>txt</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
<welcome-file-list>
<welcome-file>index.jsp</welcome-file>
<welcome-file>index.html</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>montana</servlet-name>
<servlet-class>com.masstech.montana.boundary.uii.MainServlet</servlet-class>
<init-param>
<param-name>db</param-name>
<param-value>MontanaDS</param-value>
</init-param>
<init-param>
<param-name>user</param-name>
<param-value>MS</param-value>
</init-param>
<init-param>
<param-name>password</param-name>
<param-value>MS</param-value>
</init-param>
</servlet>
<servlet>
<servlet-n[i]Long postings are being truncated to ~1 kB at this time.

Installation error for elements 11 on mac

I keep getting this error and I don't know how to fix it and get it to install! Please help!
WARNING: DW031: Payload:{F6F5021E-0548-43C1-82CC-C5C7A6906585} Camera Profiles Installer 7.0.0.0 has been updated and has been selected for repair. The patch {0449467E-102A-4514-9F4D-91BCEE129390} Camera Profiles Installer_7.1_ElementsCameraRawProfile7.0All 7.1.0.0 will be uninstalled now.
WARNING: DW031: Payload:{F6F5021E-0548-43C1-82CC-C5C7A6906585} Camera Profiles Installer 7.0.0.0 has been updated and has been selected for repair. The patch {0449467E-102A-4514-9F4D-91BCEE129390} Camera Profiles Installer_7.1_ElementsCameraRawProfile7.0All 7.1.0.0 will be uninstalled now.
----------- Payload: {64191879-379D-4ADF-9D1E-929FC71E7218} Elements 11 Organizer 11.0.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirg4uZPBoU/Assets1/application/Adobe Elements 11 Organizer.app/Contents/MacOS/etc/cmp/trans-l5z.dat" to "/Applications/Adobe Elements 11 Organizer.app/Contents/MacOS/etc/cmp/trans-l5z.dat" Error 0(Seq 3085)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 3085)
ERROR: DF024: Unable to restore file at "/Applications/Adobe Elements 11 Organizer.app/Contents/MacOS/etc/cmp/trans-l5z.dat" from backup at "/private/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/Cleanup At Startup/.tempiGYkJC" Error 0(Seq 3085)
ERROR: DW063: Error rolling back command ARKDeleteFileCommand(Seq 3085)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe WinSoft Linguistics Plugin CS5: Install failed
ERROR: DW050: - Photoshop Camera Raw for Elements 11: Install failed
ERROR: DW050: - Elements 11 Organizer: Failed due to Language Pack installation failure
ERROR: DW050: - Elements 11 Organizer_AdobeElements11Organizer_en_US: Install failed
ERROR: DW050: - Adobe XMP Panels CS5: Install failed
ERROR: DW050: - AdobeTypeSupport CS5: Install failed
ERROR: DW050: - Adobe Linguistics CS5: Install failed
ERROR: DW050: - AdobeCMaps CS5: Install failed
ERROR: DW050: - Adobe Photoshop Elements 11_AdobePhotoshopElements11_en_US: Install failed
ERROR: DW050: - Adobe Photoshop Elements 11: Failed due to Language Pack installation failure

Please move the application /Applications/Adobe Elements 11 Organizer.app to trash(take a backup if you want) and then try again. Please let us know if the issue still persists.

New Adobe Photoshop elements 11-can not share pictures. I do use AOL email. Get error of "Elements 11 Organ. has stopped working, I have looked into sharing tab and my only option is Adobe email settings. I do have outlook set up to work on computer run

New Adobe Photoshop elements 11-can not share pictures. I do use AOL email. Get error of "Elements 11 Organ. has stopped working, I have looked into sharing tab and my only option is Adobe email settings. I do have outlook set up to work on computer running windows 8.1 Please help, Mainly use to share pictures. Thanks!

One thing puzzles me:
RedClayFarmer wrote:
I then found one suggestion that the problem might involve permissions. The suggestion was to right click PhotoshopElementsOrganizer.exe in its installation folder (which on my computer is at at D:\Photo\Elements 11 Organizer) and run Organizer as an administrator. This also failed.
I don't understand why running the exe from the installation folder would have worked.
I would have simply tried to run that exe from its real location :
Sorry, I can't help you more about permissions...

ERROR: Dequeue Element in Acquire Semaphore

Similar Messages

Maybe you are looking for