Error during execution using WAIT UP TO sentence
We are running several process of WorkFlows and after an instance crash we started having problems with them.
Some of the WorkFlows are looping in the following code.
<b>begin_method chequea_bloqueo_orden_servi changing container.
data:
order like aufk-aufnr,
bloqueo like regen-kennzx.
clear: order, bloqueo.
swc_get_object_key self order.
wait up to 120 seconds.
call function 'ENQUEUE_ESORDER'
exporting
mode_aufk = 'E'
aufnr = order
exceptions
foreign_lock = 1
system_failure = 2
others = 3.
if sy-subrc <> 0.
bloqueo = 'X'.
swc_set_element container 'Bloqueo' bloqueo.
exit.
endif.
call function 'DEQUEUE_ESORDER'
exporting
aufnr = order
_synchron = 'X'.
clear bloqueo.
swc_set_element container 'Bloqueo' bloqueo.
end_method.</b>
Is there any way to verify that the workflow is executing exactly this method?
We know that the object key is not blocked but we saw in the workflow log into the container the element 'Bloqueo' is flagged. Therefore the workflow continue in an infinite loop.
There is anyone that can help us...
Best regards.
Hi Antonella,
The issue is the use of the wait up to statement. In a background task, this means the workitem in question, and thus the workflow, will be locked until the method has completed. In this case it means it will take total method processing time + 120 seconds. Now if there is any form of parallel processing in the workflow, or if an event is published which wants to update a wait step in the workflow instance, it cannot because the background method is controlling the lock of the workitem, and the entire flow instance.
I would analyse why the wait up to statement is being used and see if I can use the Requested start deadline control to give the processing delay.
Regards
Gareth
Similar Messages
-
ORA-04088: error during execution of trigger
Error Description :
We have more than 100 of records in a csv file which we are processing through a script. At the first execution let
say it generates trigger exception for five records ... when I execute the script second time those five records
are not throwing any exception but may be some other records. But consecutive trigger exception is not happening for any record . If a particular record is throwing exception at first attempt then in the second attempts it's not throwing the trigger exception.
Input file
PROPRTY_ID,NAME,OLD STREET,CITY,STATE,ZIP,NEW STREET,NEW CITY,NEW STATE,NEW ZIP
88527091,SAM PAUL SUMMU ,1061 XYZ,CITY1,ST,95626,5512 XX YY ZZ,TOWN,PA,12345-9812
Error :
88527091,SAM PAUL SUMMU ,1061 XYZ,CITY1,ST,95626,5512 XX YY ZZ,TOWN,PA,12345-9812 - PROPERTY Update Error : ORA-00001: unique constraint (PROD.PK_AUDIT_LOG) violated
ORA-06512: at "PROD.PROPERTY_AUD", line 159
ORA-04088: error during execution of trigger 'PROD.PROPERTY_AUD'
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> desc property
Name Null? Type
PROPERTY_ID NOT NULL NUMBER(20)
TYPE_CODE VARCHAR2(10)
TYPE_PREFIX VARCHAR2(10)
DWELLING_TYPE_CODE NOT NULL VARCHAR2(10)
DWELLING_TYPE_PREFIX NOT NULL VARCHAR2(10)
STREET_NUMBER VARCHAR2(25)
STREET_DIRECTION CHAR(2)
STREET_NAME NOT NULL VARCHAR2(45)
UNIT_NUMBER VARCHAR2(15)
CITY_CODE VARCHAR2(10)
STATE NOT NULL CHAR(2)
ZIP_CODE VARCHAR2(10)
UNIT_TYPE VARCHAR2(10)
UNIT_PREFIX VARCHAR2(10)
COUNTY_CODE VARCHAR2(10)
COUNTRY_CODE NOT NULL VARCHAR2(10)
SQUARE_FEET NUMBER(6)
NUMBER_MOTHER_LAW_UNITS NUMBER(6)
YEAR_BUILT DATE
PROPERTY_VALUE NUMBER(12)
ZIP_PLUS_4 VARCHAR2(4)
SFI_REQ_FLAG CHAR(1)
LAST_MODIFIED NOT NULL DATE
LAST_MODIFIED_BY VARCHAR2(31)
STANDARDIZED_STATUS VARCHAR2(10)
STANDARDIZED_DESC VARCHAR2(200)
SQL> desc audit_log
Name Null? Type
SEQ_NO NOT NULL NUMBER(20)
TABLE_NAME VARCHAR2(31)
USER_STAMP VARCHAR2(31)
TIME_STAMP DATE
TRAN_CODE CHAR(2)
RECORD1 VARCHAR2(2000)
RECORD2 VARCHAR2(2000)
FLAG_FLD CHAR(1)
SFI_FLAG_FLD CHAR(1)
ERROR_NUMBER NUMBER
Update Query which is getting executed :
UPDATE PROPERTY
SET DWELLING_TYPE_CODE = 'SFR',
DWELLING_TYPE_PREFIX = 'DWELLING',
STREET_NUMBER = NULL,
STREET_DIRECTION = NULL,
STREET_NAME = ln_new_street_name, -- <From input file>
UNIT_NUMBER = NULL,
CITY_CODE = ln_city_code, -- <From other Table>
STATE = ln_new_state, -- <From input file>
ZIP_CODE = ln_new_zip_code,
UNIT_TYPE = NULL,
UNIT_PREFIX = NULL,
COUNTY_CODE = ln_county_code, -- <From Other table>
COUNTRY_CODE = 1,
ZIP_PLUS_4 = ln_zip_plus_4 -- <From Input file>
WHERE PROPERTY_ID = ln_property_id; -- <From Other table>
*NOTE :* Property.LAST_MODIFIED field is auto populate through other trigger. It does not causing any problem.
This might be helpful :
SQL> select OWNER, CONSTRAINT_NAME, TABLE_NAME,COLUMN_NAME from dba_cons_columns where CONSTRAINT_NAME='PK_AUDIT_LOG';
OWNER CONSTRAINT_NAME TABLE_NAME COLUMN_NAME
PROD PK_AUDIT_LOG AUDIT_LOG SEQ_NO
PROD_ARCH PK_AUDIT_LOG AUDIT_LOG SEQ_NO
SQL> select SEQ_NO, trim(RECORD1), trim(RECORD2),TIME_STAMP
from audit_log where RECORD1 like '%BUTTE%' order by TIME_STAMP;
SEQ_NO
1675677212
TRIM(RECORD1)
00000000000031814095...SFR .DWELLING ...5512 BUTTE VIEW CT ..15532
.CA.95765 ...1377 .1 .....5000..20100922.SUSMSAHA ..
TRIM(RECORD2)
00000000000031814095...SFR .DWELLING ...5512 BUTTE VIEW CT ..15532
.CA.95765 ...1377 .1 .....5000..20100922.SUSMSAHA ..
TIME_STAMP
22-sep-2010
Trigger Body which is fired and throwing the exception :
create or replace trigger PROPERTY_AUD
before insert or update on PROPERTY
for each row
declare
rec1 varchar2(2000);
rec2 varchar2(2000);
tcode char(1);
ln_seq_id NUMBER:=Null;
ls_sql VARCHAR2(2000):=Null;
begin
select temp_audit_seq.nextval into ln_seq_id from dual;
rec1 := null;
rec2 := null;
if user = 'NONREP_USER' then
return;
end if;
if (dbms_reputil.from_remote = FALSE) then
:NEW.last_modified := sysdate;
if (user = 'SALESFORCE_SYNC') then
:new.last_modified_by := NVL(:new.last_modified_by,USER);
else
:new.last_modified_by := user;
end if;
end if;
if inserting then
rec1 :=
LPAD(:new.PROPERTY_ID, 20, '0' ) || '.' ||
RPAD(:new.TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.STREET_NUMBER, 25, ' ' ) || '.' ||
RPAD(:new.STREET_DIRECTION, 2, ' ' ) || '.' ||
RPAD(:new.STREET_NAME, 45, ' ' ) || '.' ||
RPAD(:new.UNIT_NUMBER, 15, ' ' ) || '.' ||
RPAD(:new.CITY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.STATE, 2, ' ' ) || '.' ||
RPAD(:new.ZIP_CODE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_TYPE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.COUNTY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.COUNTRY_CODE, 10, ' ' ) || '.' ||
LPAD(:new.SQUARE_FEET, 6, '0' ) || '.' ||
LPAD(:new.NUMBER_MOTHER_LAW_UNITS, 6, '0' ) || '.' ||
TO_CHAR(:new.YEAR_BUILT, 'YYYYMMDD') || '.' ||
LPAD(:new.PROPERTY_VALUE, 12, '0' ) || '.' ||
RPAD(:new.ZIP_PLUS_4, 4, ' ' ) || '.' ||
RPAD(:new.SFI_REQ_FLAG, 1, ' ' ) || '.' ||
TO_CHAR(:new.LAST_MODIFIED, 'YYYYMMDD') || '.' ||
RPAD(:new.LAST_MODIFIED_BY, 31, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_STATUS, 10, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_DESC, 200, ' ' );
tcode := 'I';
elsif deleting then
rec1 :=
LPAD(:new.PROPERTY_ID, 20, '0' ) || '.' ||
RPAD(:new.TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.STREET_NUMBER, 25, ' ' ) || '.' ||
RPAD(:new.STREET_DIRECTION, 2, ' ' ) || '.' ||
RPAD(:new.STREET_NAME, 45, ' ' ) || '.' ||
RPAD(:new.UNIT_NUMBER, 15, ' ' ) || '.' ||
RPAD(:new.CITY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.STATE, 2, ' ' ) || '.' ||
RPAD(:new.ZIP_CODE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_TYPE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.COUNTY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.COUNTRY_CODE, 10, ' ' ) || '.' ||
LPAD(:new.SQUARE_FEET, 6, '0' ) || '.' ||
LPAD(:new.NUMBER_MOTHER_LAW_UNITS, 6, '0' ) || '.' ||
TO_CHAR(:new.YEAR_BUILT, 'YYYYMMDD') || '.' ||
LPAD(:new.PROPERTY_VALUE, 12, '0' ) || '.' ||
RPAD(:new.ZIP_PLUS_4, 4, ' ' ) || '.' ||
RPAD(:new.SFI_REQ_FLAG, 1, ' ' ) || '.' ||
TO_CHAR(:new.LAST_MODIFIED, 'YYYYMMDD') || '.' ||
RPAD(:new.LAST_MODIFIED_BY, 31, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_STATUS, 10, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_DESC, 200, ' ' );
tcode := 'D';
else
rec1 :=
LPAD(:old.PROPERTY_ID, 20, '0' ) || '.' ||
RPAD(:old.TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:old.TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:old.DWELLING_TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:old.DWELLING_TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:old.STREET_NUMBER, 25, ' ' ) || '.' ||
RPAD(:old.STREET_DIRECTION, 2, ' ' ) || '.' ||
RPAD(:old.STREET_NAME, 45, ' ' ) || '.' ||
RPAD(:old.UNIT_NUMBER, 15, ' ' ) || '.' ||
RPAD(:old.CITY_CODE, 10, ' ' ) || '.' ||
RPAD(:old.STATE, 2, ' ' ) || '.' ||
RPAD(:old.ZIP_CODE, 10, ' ' ) || '.' ||
RPAD(:old.UNIT_TYPE, 10, ' ' ) || '.' ||
RPAD(:old.UNIT_PREFIX, 10, ' ' ) || '.' ||
RPAD(:old.COUNTY_CODE, 10, ' ' ) || '.' ||
RPAD(:old.COUNTRY_CODE, 10, ' ' ) || '.' ||
LPAD(:old.SQUARE_FEET, 6, '0' ) || '.' ||
LPAD(:old.NUMBER_MOTHER_LAW_UNITS, 6, '0' ) || '.' ||
TO_CHAR(:new.YEAR_BUILT, 'YYYYMMDD') || '.' ||
LPAD(:old.PROPERTY_VALUE, 12, '0' ) || '.' ||
RPAD(:old.ZIP_PLUS_4, 4, ' ' ) || '.' ||
RPAD(:old.SFI_REQ_FLAG, 1, ' ' ) || '.' ||
TO_CHAR(:new.LAST_MODIFIED, 'YYYYMMDD') || '.' ||
RPAD(:old.LAST_MODIFIED_BY, 31, ' ' ) || '.' ||
RPAD(:old.STANDARDIZED_STATUS, 10, ' ' ) || '.' ||
RPAD(:old.STANDARDIZED_DESC, 200, ' ' );
rec2 :=
LPAD(:new.PROPERTY_ID, 20, '0' ) || '.' ||
RPAD(:new.TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.STREET_NUMBER, 25, ' ' ) || '.' ||
RPAD(:new.STREET_DIRECTION, 2, ' ' ) || '.' ||
RPAD(:new.STREET_NAME, 45, ' ' ) || '.' ||
RPAD(:new.UNIT_NUMBER, 15, ' ' ) || '.' ||
RPAD(:new.CITY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.STATE, 2, ' ' ) || '.' ||
RPAD(:new.ZIP_CODE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_TYPE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.COUNTY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.COUNTRY_CODE, 10, ' ' ) || '.' ||
LPAD(:new.SQUARE_FEET, 6, '0' ) || '.' ||
LPAD(:new.NUMBER_MOTHER_LAW_UNITS, 6, '0' ) || '.' ||
TO_CHAR(:new.YEAR_BUILT, 'YYYYMMDD') || '.' ||
LPAD(:new.PROPERTY_VALUE, 12, '0' ) || '.' ||
RPAD(:new.ZIP_PLUS_4, 4, ' ' ) || '.' ||
RPAD(:new.SFI_REQ_FLAG, 1, ' ' ) || '.' ||
TO_CHAR(:new.LAST_MODIFIED, 'YYYYMMDD') || '.' ||
RPAD(:new.LAST_MODIFIED_BY, 31, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_STATUS, 10, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_DESC, 200, ' ' );
tcode := 'U';
end if;
ls_sql :='
INSERT INTO AUDIT_LOG
( seq_no,
table_name,
user_stamp,
time_stamp,
tran_code,
record1,
record2)
VALUES
( :id,
:s_table_name,
:s_user_name,
:d_sysdate,
:s_tcode,
:s_rec1,
:s_rec2
EXECUTE IMMEDIATE ls_sql
USING ln_seq_id,
'PROPERTY',
user,
sysdate,
tcode,
rec1,
rec2;
end;
Your suggestion is highly appreciated ..
Edited by: Bipul on Sep 23, 2010 12:40 AMTEMP_AUDIT_SEQ generates number with the increment of +1
Although there seems other sequence populating the AUDIT_LOG table through a different sequence with the increment of +10. So till now there are already 1179 different numbers residing in audit_log.seq_no and yet to be generated by the TEMP_AUDIT_SEQ sequence. I will look into more details.
SQL> select max(seq_no) from audit_log;
MAX(SEQ_NO)
1675689121
SQL> select TEMP_AUDIT_SEQ.nextval from dual;
NEXTVAL
1675677285
SQL> select count(*) From audit_log where seq_no>1675677285;
COUNT(*)
1179
SQL> select count(*) from audit_log where seq_no>1675677283 and mod(seq_no,2)=1;
COUNT(*)
1179
SQL> select seq_no from audit_log where seq_no>1675677283 and mod(seq_no,2)=1 and rownum<12;
SEQ_NO
1675677291
1675677301
1675677311
1675677321
1675677331
1675677341
1675677351
1675677361
1675677371
1675677381
1675677391
11 rows selected.
Thank you Lee and Herald ten Dam ... -
ORA-06502:numeric or value errORA-04088: error during execution of trigger
I received the following error message while entering a number within the maximum value (i.e. 9,999,999.) allowed in a data entry form which is separate from the base form:
ORA-06502: PL/SQL: numeric or value error:number precision too large ORA-06512:at "<Owner>.<Trigger>", line 194 ORA-04088: error during execution of trigger "<Owner>.<Trigger>"
Where <Owner> is the schema name and <Trigger> is the trigger name. The data block of the entry form is based on a database table, and the sum of all values entered (w/ a maximum value of 99,999,999.) is displayed in the base form. A grand total of this sum along w/ other totals on the base form is also displayed w/ a maximum value defined as 999,999,999. I only receive the above error message when the grand total is greater than 99,999,999. If the grand total is less than or equal to 99,999,999, the base form works fine. Why????
I have verified all the attributes for the database columns and form fields and all seems to be okay, and I am running out of my wits. I am desperately in need of your help in resolving this issue soon because pressure is on...
Thanks in advance for any/all the help.Orchid wrote:
I received the following error message while entering a number within the maximum value (i.e. 9,999,999.) allowed in a data entry form which is separate from the base form:
ORA-06502: PL/SQL: numeric or value error:number precision too large ORA-06512:at "<Owner>.<Trigger>", line 194 ORA-04088: error during execution of trigger "<Owner>.<Trigger>"
Where <Owner> is the schema name and <Trigger> is the trigger name. The data block of the entry form is based on a database table, and the sum of all values entered (w/ a maximum value of 99,999,999.) is displayed in the base form. A grand total of this sum along w/ other totals on the base form is also displayed w/ a maximum value defined as 999,999,999. I only receive the above error message when the grand total is greater than 99,999,999. If the grand total is less than or equal to 99,999,999, the base form works fine. Why????
I have verified all the attributes for the database columns and form fields and all seems to be okay, and I am running out of my wits. I am desperately in need of your help in resolving this issue soon because pressure is on...
Thanks in advance for any/all the help.check your associated database column length. It's precision is not able to hold you said value. increase the length by
ALTER TABLE table_name
MODIFY (column_name NUMBER(20) );it's above solution don't work. Then, probably you use variable in the trigger code which hold the vale and it's size is limited. increase it.
added
try this
increase the length of TAB_S_TOT_COST 9 to 18.
and your problem will solved.
Hamid
Edited by: HamidHelal on Feb 13, 2013 10:28 AM -
During file extraction, "Error during execution, error code =4"
from Oracle® Fusion Middleware Getting Started With Installation for Oracle WebLogic Server
11g Release 1 (10.3.1)
http://download.oracle.com/docs/cd/E12839_01/web.1111/e13751/toc.htm#CIHCJJIA
> said "instead of installing the JRockit JDK that is included, Oracle strongly recommends that you download and install the latest available JRockit version separately."
selected "Oracle JRockit Mission Control 4.0, for Java version 6"
> got file named: http://download.oracle.com/otn/bea/jrockit/jrmc-4.0.0-1.6.0-linux-ia32.bin
Set permissions to *.bin installer:
chmod a+x file_name.bin ./file_name.bin
During file extraction (as 'oracle' user/owner) got: "Error during execution, error code =4"
Please advise.
thank you.hi,
i ran into teh same problem and just figured out that my CPU is too old (AMD Athlon 3000+). This processor doesnt support SSE2, as required, see
http://download.oracle.com/docs/cd/E15289_01/doc.40/e15066/suppconfigchanges.htm#CHDDFHJF
does your machine have all the relevant features? -
Error during DatabaseCopy using SAP tools for SQL Server (v7.12)
I'm trying to perform a system copy from PRD to QAS. The database has been mounted to QAS via detach and attach method. I did a DBCC on the database and everything looks OK. I'm running SAPINST (SAP Tools for MSSQL) and selecting the Database Copy option. The source database has a schema of DBO. Both PRD and QAS are running SAP 4.7/Basis 620. The target schema is QAS. SAPINST fails in step 2 (Define Params) with:
"This service cannot be used for a system with SAP ABAP release 620"
Is this message misleading? Has anyone receive this message before.
UPDATE:
I donwloaded the latest version of SAP Tools for MSSQL and now it failes during the execution phase on step, "Convert DB objects to new schema".
Here is the log:
Process environment
===================
Environment Variables
=====================
=::=::\
=C:=C:\Program Files\sapinst_instdir\MSS\CPY
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\r3tadm.STAG\Application Data
CLIENTNAME=TRAIMONOTEBOOK
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=STAG
ComSpec=C:\WINDOWS\system32\cmd.exe
DBMS_TYPE=MSS
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\r3tadm.STAG
LOGONSERVER=
STAG
MSSQL_DBNAME=R3T
MSSQL_SERVER=stag
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
Path=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Dell\SysMgt\RAC5;C:\Program Files\Dell\SysMgt\oma\bin;C:\Program Files\Dell\SysMgt\oma\oldiags\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\usr\sap\R3T\SYS\exe\run
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 6, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f06
ProgramFiles=C:\Program Files
SAPINST_EXEDIR_CD=C:/STM/I386
SAPINST_JRE_HOME=C:/WINDOWS/TEMP/3/sapinst_exe.3012.1234409473/jre
SAPLOCALHOST=stag
SESSIONNAME=RDP-Tcp#25
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\WINDOWS\TEMP\3
TMP=C:\WINDOWS\TEMP\3
USERDOMAIN=STAG
USERNAME=r3tadm
USERPROFILE=C:\Documents and Settings\r3tadm.STAG
windir=C:\WINDOWS
User: STAG\r3tadm, Id: S-1-5-21-2727398557-1322528747-1943968026-1019
Working directory: C:/Program Files/sapinst_instdir/MSS/CPY
Current access token
====================
Could not get thread token. Last error: 1008. I assume that no thread token exists.
Got process token.
Privileges:
Privilege SeBackupPrivilege, display name: Back up files and directories, not enabled.
Privilege SeRestorePrivilege, display name: Restore files and directories, not enabled.
Privilege SeShutdownPrivilege, display name: Shut down the system, not enabled.
Privilege SeDebugPrivilege, display name: Debug programs, not enabled.
Privilege SeAssignPrimaryTokenPrivilege, display name: Replace a process level token, not enabled.
Privilege SeSystemEnvironmentPrivilege, display name: Modify firmware environment values, not enabled.
Privilege SeIncreaseQuotaPrivilege, display name: Adjust memory quotas for a process, not enabled.
Privilege SeChangeNotifyPrivilege, display name: Bypass traverse checking, enabled.
Privilege SeRemoteShutdownPrivilege, display name: Force shutdown from a remote system, not enabled.
Privilege SeTcbPrivilege, display name: Act as part of the operating system, not enabled.
Privilege SeUndockPrivilege, display name: Remove computer from docking station, not enabled.
Privilege SeSecurityPrivilege, display name: Manage auditing and security log, not enabled.
Privilege SeTakeOwnershipPrivilege, display name: Take ownership of files or other objects, not enabled.
Privilege SeLoadDriverPrivilege, display name: Load and unload device drivers, not enabled.
Privilege SeManageVolumePrivilege, display name: Perform volume maintenance tasks, not enabled.
Privilege SeSystemProfilePrivilege, display name: Profile system performance, not enabled.
Privilege SeImpersonatePrivilege, display name: Impersonate a client after authentication, enabled.
Privilege SeSystemtimePrivilege, display name: Change the system time, not enabled.
Privilege SeCreateGlobalPrivilege, display name: Create global objects, enabled.
Privilege SeProfileSingleProcessPrivilege, display name: Profile single process, not enabled.
Privilege SeIncreaseBasePriorityPrivilege, display name: Increase scheduling priority, not enabled.
Privilege SeCreatePagefilePrivilege, display name: Create a pagefile, not enabled.
Groups:
Group count: 14
\LOCAL S-1-2-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
BUILTIN\Administrators S-1-5-32-544 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_OWNER
\Everyone S-1-1-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
BUILTIN\Users S-1-5-32-545 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_R3T_LocalAdmin S-1-5-21-2727398557-1322528747-1943968026-1021 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_LocalAdmin S-1-5-21-2727398557-1322528747-1943968026-1023 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\None S-1-5-21-2727398557-1322528747-1943968026-513 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\INTERACTIVE S-1-5-4 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\NTLM Authentication S-1-5-64-10 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\Authenticated Users S-1-5-11 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
\ S-1-5-5-0-36828865 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_LOGON_ID
NT AUTHORITY\REMOTE INTERACTIVE LOGON S-1-5-14 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\This Organization S-1-5-15 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_R3T_GlobalAdmin S-1-5-21-2727398557-1322528747-1943968026-1018 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
ERROR 2009-02-11 19:31:46.529 [sixxcstepexecute.cpp:984]
FCO-00011 The step MoveSchema with step key |SAPMSSTOOLS|ind|ind|ind|ind|0|0|MssSysCopy|ind|ind|ind|ind|4|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema was executed with status ERROR .
TRACE 2009-02-11 19:31:46.544
Call block:CallBackInCaseOfAnErrorDuringStepExecution
function:CallTheLogInquirer
is validator: true
WARNING 2009-02-11 19:31:46.544 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR 2009-02-11 19:31:46.544 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
TRACE 2009-02-11 19:31:46.544
A problem occurs during execution the inquirer callback. SAPinst will switch back to the standard behaiviour.
TRACE 2009-02-11 19:31:46.544 [iaxxgenimp.cpp:707]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing service SAP Toools for MS SQL Server > Database Copy. You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/MSS/CPY. </p> </body></html>
TRACE 2009-02-11 19:31:46.544 [iaxxgenimp.cpp:1245]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Edited by: Tony Raimo on Feb 12, 2009 4:37 AMThis is looks like permission issue on source folder
Copy source in to your local drive and try again.
I had same issue and able to resolve after copy EXP1 EXP2 and EXP3 folder in to local drive C: with Everyone full access
Yogesh -
Error during execution phase of sps10 update in CRM system
Hi all,
I am applying SPS10 on my CRM system and getting the following error during the execution phase. The system is running on Windows/MaxDB.
ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2014/03/10 04:26:51")
2 ETP301 ----------------------------------------------------------------------
2 ETP399 processing modeflag 'F'
2 ETP301 ----------------------------------------------------------------------
2 ETP330XActivation of Shadownametabs with DDL
2 ETP301 ----------------------------------------------------------------------
3 ETP379X04:26:51: activating Nametab "COMC_ATTRIBUTE":
2 ETP399 >> Name of inactive nametab to read : DDXTT
2 ETP399 >> Format of inactive nametab to read: 5.0
3 ETP355Xstatements:
3 ETP399 CREATE UNIQUE INDEX "COMC_ATTRIBUTE~UNI" on "COMC_ATTRIBUTE"
3 ETP399 ("ATTR_ID")
3 ETP399
2WETP000 04:26:51: Retcode 1: error in DDL statement for "COMC_ATTRIBUTE " - repeat
2EETP345 04:27:04: Retcode 1: SQL-error "-1452-POS(1) Duplicate secondary key" in DDL statement for
2EETP345 "COMC_ATTRIBUTE "
2 ETP399 --------------- DB-ROLLBACK() ---------------
2EETP334 04:27:04: error in DDL, nametab for "COMC_ATTRIBUTE" not activated
2 ETP301 ----------------------------------------------------------------------
I searched in the service market place for notes which could help me resolve the issue, but could not find any. Please do let me know as to how this issue can be resolve.
Regards,
Balaji.PHi Balaji,
In SAP Note 601757 - Error upgrading from Release 2.0C, 3.0, 3.1, 3.5 to CRM 4.0
, I have found the below lines.
"If you do not execute the report before the upgrade, 'DUPLICATE KEY' errors occur during the upgrade of the COMC_ATTRIBUTE table. Up to now, this was observed in the SHADOW_IMPORT_INC phase. In this case, you must delete the UNI secondary index from the COMC_ATTRIBUTE table manually. You can then continue the upgrade by repeating the phase."
Regards,
Rafikul -
WS20000050 - Custom rule in step 372 - Error during execution
I have attached a custom rule in Step 372 of workflow WS20000050
WS20000050 works fine with standard rule (168)
Custom rule is tested and simulated and it returns the Person 'P' and User 'US'
WS20000050 genarates fine with no errors (4 information only)
Errors after execution in SWIA is
Error when processing node '0000000372' (ParForEach index 000000)
Error when creating a component of type 'Step'
Error when creating a work item
Agent determination for step '0000000372' failed
Error in resolution of rule 'AC92000002' for step '0000000372'
Element OBJID is not available in the container
next node in error
Work item 000000426198: Object FLOWITEM method EXECUTE cannot be executed
Error when processing node '0000000372' (ParForEach index 000000)
I tried to delete OBJID from the binding for the rule but the same error repeats
Any help is appreciatedElement OBJID is not available in the container
Make proper binding from workflow to rule, the value OBJID is not reaching the rule conatiner.
Error in resolution of rule 'AC92000002' for step '0000000372'
Rule is not returning any agent chek that? -
Error during deploying using sapdeploy ant task
I am attempting to deploy a simple service which I have created using Dev studio. Instead of deploying using Dev studio, I want to use ant task for the same.
This is the output I see in the console:
deploy:
[sapdeploy] Starting deployment with the following properties:
[sapdeploy] Version Handling Rule: all
[sapdeploy] Error Handling Strategies: [error action: 'prerequisites', error strategy: 'stop', error action: 'deploy', error strategy: 'stop']
[sapdeploy] The targeted SAP J2EE Engines are: [server host: 'myhost', server port '50000', user name 'J2EE_ADMIN'.]
[sapdeploy] Starting to validate the data...
[sapdeploy] Validation ended
[sapdeploy] root dir C:\temp\HelloWorldEAR
[sapdeploy] Selected archives for deployment:
[sapdeploy] 1: 'C:\temp\HelloWorldEAR\HelloWorldEAR.ear'
[sapdeploy] Starting validation for the engine 'server host: 'myhost', server port '50000', user name 'J2EE_ADMIN'.'
[sapdeploy] Engine data validated successfully
[sapdeploy] Starting deployment for the engine 'server host: 'myhost', server port '50000', user name 'J2EE_ADMIN'.'
[sapdeploy] An error occured during the deployment.
[sapdeploy] The result of the deployment is: Error
[sapdeploy] Deployment ended
Where can I get more details of what might be wrong with the deploy process? I tried "-v" flag but to no avail. Syslog of the server shows nothing of interest.
Thanks in advance for any help.
Regards,
SameerLogs will be in log\dc_log folder.
-
Calc manager v11.1.2.1 error during execution
We have an issue with some of the rulesets which fails execution although there no issues during validation. The rules run fine individually but error when executed via ruleset.
The error in the calcmanager execution log is as below. Import the ruleset again fixes the problem but reoccurs abruptly every now and then.
"Violation of UNIQUE KEY constraint 'UK_CALC_MGR_USER_VAR_PPT'. Cannot insert duplicate key in object 'dbo.HSP_CALC_MGR_USER_VAR_PPT'. "There is one Oracle Doc which talks about the same issue:
Calculation Manager Rules Fail To Execute In Planning Web (Doc ID 1357612.1)
Its asking you to:
1. Log into Calculation Manager
2. Go to View > Deployment View
3. Drill down to the Application > To Be Deployed and uncheck all the rules
4. Right click on the Application > Deploy (This action will clear all the rules and variables from Planning
5. Go to 'To Be Deployed' and check the rules to be deployed to Planning
6. Right click on the application > Deploy (this action should put back the rules and variables back to Planning)
Cheers..!!
Rahul S. -
Error during execution of SSO with Oracle Access Manager 11gR2
Hello friends,
I have a problem with SSO using Oracle Access Manager 11g R2, then describes the steps taken in this test:
1. Is accessed by the OAM protected application through IE browser, Chrome and Firefox for testing purposes.
2. The OAM protected application, here is redirected to the OAM page to enter the credentials for the application.
3. Shows the application, and again reorders authentication credentials.
Here the details of the cookie:
a. cookie1: ADMINCONSOLESESSION
b. cokkie2: OAMAuthnCookie_webgate11g.domain.com: 7777
We also found an error when starting the node oam_server in WebLogic Server 11g (10.3.6)
Log:
[2012-11-29T18:16:02.411-05:00] [oam_server1] [ERROR] [JPS-03156] [oracle.jps.authorization.framework] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JhEStpUFW7WFLzRL8A1GhylJ000002,0] [APP: oam_server#11.1.2.0.0] The exception has been thrown by ARME. The authorization result is set to deny.[[
com.bea.security.providers.authorization.asi.InvocationException: ArmeRUNTIME Exception: null
at com.bea.security.providers.authorization.asi.AuthorizationProviderImpl.isAccessAllowed(AuthorizationProviderImpl.java:396)
at com.bea.security.ssal.micro.MicroAuthorizationManagerWrapper.isAccessAllowed(MicroAuthorizationManagerWrapper.java:73)
at com.bea.security.impl.AuthorizationServiceImpl.isAccessAllowed_internal(AuthorizationServiceImpl.java:914)
at com.bea.security.impl.AuthorizationServiceImpl.isAccessAllowed(AuthorizationServiceImpl.java:745)
at com.bea.security.impl.AuthorizationServiceImpl.isAccessAllowed(AuthorizationServiceImpl.java:668)
at com.bea.security.impl.AuthorizationServiceImpl.isAccessAllowed(AuthorizationServiceImpl.java:622)
at com.bea.security.AuthorizationService.isAccessAllowed(AuthorizationService.java:365)
at oracle.security.am.common.policy.runtime.provider.oes.proxy.OESRuntimeProxy.wait4OESRuntimeDBPolicyRefreshCompletion(OESRuntimeProxy.java:263)
at oracle.security.am.common.policy.runtime.provider.oes.proxy.OESRuntimeProxy.init(OESRuntimeProxy.java:193)
at oracle.security.am.common.policy.runtime.provider.oes.OESPolicyRuntimeProvider.init(OESPolicyRuntimeProvider.java:167)
at oracle.security.am.common.policy.runtime.PolicyRuntimeFactory.getNewInstance(PolicyRuntimeFactory.java:162)
at oracle.security.am.common.policy.runtime.PolicyRuntimeFactory.init(PolicyRuntimeFactory.java:93)
at oracle.security.am.common.policy.runtime.PolicyRuntimeFactory.getPolicyRuntime(PolicyRuntimeFactory.java:84)
at oracle.security.am.common.policy.util.PolicyComponentLifecycle.initialize(PolicyComponentLifecycle.java:100)
at oracle.security.am.lifecycle.ApplicationLifecycle.initComponentBootstrap(ApplicationLifecycle.java:156)
at oracle.security.am.lifecycle.ApplicationLifecycle.contextInitialized(ApplicationLifecycle.java:86)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1868)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: com.wles.InternalException: ArmeRUNTIME Exception: null
at com.wles.arme.Credentials_ca.exceptionTransport(Credentials_ca.java:606)
at com.wles.arme.Credentials_ca._accessAllowed(Credentials_ca.java:343)
at com.wles.arme.CredentialsImpl._accessAllowed(CredentialsImpl.java:400)
at com.wles.arme.CredentialsImpl._accessAllowed(CredentialsImpl.java:422)
at com.wles.arme.CachingCredentialsImpl._accessAllowed(CachingCredentialsImpl.java:225)
at com.wles.arme.CredentialsImpl.accessAllowed(CredentialsImpl.java:452)
at com.wles.arme.CachingCredentialsImpl.accessAllowed(CachingCredentialsImpl.java:68)
at com.bea.security.providers.authorization.asi.AuthorizationProviderImpl.ARMEisAccessAllowed(AuthorizationProviderImpl.java:977)
at com.bea.security.providers.authorization.asi.AuthorizationProviderImpl.isAccessAllowed(AuthorizationProviderImpl.java:347)
... 52 more
causal exception is:
com.wles.InternalException: ArmeRUNTIME Exception: null
at com.wles.arme.Credentials_ca.exceptionTransport(Credentials_ca.java:606)
at com.wles.arme.Credentials_ca._accessAllowed(Credentials_ca.java:343)
at com.wles.arme.CredentialsImpl._accessAllowed(CredentialsImpl.java:400)
at com.wles.arme.CredentialsImpl._accessAllowed(CredentialsImpl.java:422)
at com.wles.arme.CachingCredentialsImpl._accessAllowed(CachingCredentialsImpl.java:225)
at com.wles.arme.CredentialsImpl.accessAllowed(CredentialsImpl.java:452)
at com.wles.arme.CachingCredentialsImpl.accessAllowed(CachingCredentialsImpl.java:68)
at com.bea.security.providers.authorization.asi.AuthorizationProviderImpl.ARMEisAccessAllowed(AuthorizationProviderImpl.java:977)
at com.bea.security.providers.authorization.asi.AuthorizationProviderImpl.isAccessAllowed(AuthorizationProviderImpl.java:347)
at com.bea.security.ssal.micro.MicroAuthorizationManagerWrapper.isAccessAllowed(MicroAuthorizationManagerWrapper.java:73)
at com.bea.security.impl.AuthorizationServiceImpl.isAccessAllowed_internal(AuthorizationServiceImpl.java:914)
at com.bea.security.impl.AuthorizationServiceImpl.isAccessAllowed(AuthorizationServiceImpl.java:745)
at com.bea.security.impl.AuthorizationServiceImpl.isAccessAllowed(AuthorizationServiceImpl.java:668)
at com.bea.security.impl.AuthorizationServiceImpl.isAccessAllowed(AuthorizationServiceImpl.java:622)
at com.bea.security.AuthorizationService.isAccessAllowed(AuthorizationService.java:365)
at oracle.security.am.common.policy.runtime.provider.oes.proxy.OESRuntimeProxy.wait4OESRuntimeDBPolicyRefreshCompletion(OESRuntimeProxy.java:263)
at oracle.security.am.common.policy.runtime.provider.oes.proxy.OESRuntimeProxy.init(OESRuntimeProxy.java:193)
at oracle.security.am.common.policy.runtime.provider.oes.OESPolicyRuntimeProvider.init(OESPolicyRuntimeProvider.java:167)
at oracle.security.am.common.policy.runtime.PolicyRuntimeFactory.getNewInstance(PolicyRuntimeFactory.java:162)
at oracle.security.am.common.policy.runtime.PolicyRuntimeFactory.init(PolicyRuntimeFactory.java:93)
at oracle.security.am.common.policy.runtime.PolicyRuntimeFactory.getPolicyRuntime(PolicyRuntimeFactory.java:84)
at oracle.security.am.common.policy.util.PolicyComponentLifecycle.initialize(PolicyComponentLifecycle.java:100)
at oracle.security.am.lifecycle.ApplicationLifecycle.initComponentBootstrap(ApplicationLifecycle.java:156)
at oracle.security.am.lifecycle.ApplicationLifecycle.contextInitialized(ApplicationLifecycle.java:86)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1868)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
We appreciate your support in solving the case. Thanks...
JLK
Edited by: JLK on Nov 30, 2012 9:43 AMHi Viju,
Did you executed the python script to register OPSS. If not then you will get the mentioned error:
I have mentioned couple of workarounds. Can you try those and let me know the results. Take the backup of your entire environment before you follow the steps:::
1. For the ARME issue patch can be applied for 11.1.2
OAM Bundle Patch Release History (Doc ID 736372.1)
Yes. This is a benign message. ( the ARME issue)
OAM 11R2 After Upgrade The Managed Server Start With Error ArmeRUNTIME Exception: Null (Doc ID 1509559.1)
The other issue is under investgation and is benign.
<oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer> WARNING when accessing oamconsole (Doc ID 1511967.1)
The final message is spoken to here:
WLS 10.3.3: "Auto-Ref-By: WebApp" deployed as shared library is affecting other web applications. (Doc ID 1210393.1)
Action Plan:
=========
1. For the ARME issue patch can be applied for 11.1.2
OAM Bundle Patch Release History (Doc ID 736372.1)
Hope this helps. -
Error During Install using Oracle DB
Hi All,
I'm trying to use an Oracle database with IDM. Our DBA used the provided script (create_waveset_tables.oracle) to set up the database, we're using the login/password that the DBA set up, I've copied the oraclejdbc.jar file to the /WEB-INF/lib directory before lauching this part of the install wizard. I get the following message:
com.waveset.exception.ConfigurationError: Identity Manager version 5.0 requires a schema update.
It's connecting to the Database. If I change the login or password, I get an error message saying that it can't connect. Any ideas? Am I missing something?
Thanks!
BillHello prabhnag,
U might be getting the this error when trying to connect to the backend oracle database due to the following reasons :
1. You might not have configured the oraclejdbc driver (classes12.zip) properly.
Action : Rename the "classes12.zip" file which can be found within the oracle installation in the ../jdbc/lib/ folder to "oraclejdbc.jar" and place it in the folder ../idm/WEB-INF/lib before proceeding to the Launch Setup screen in Sun IDM.
Note : Sun IDM supports Oracle 8i/9i
U can also download the relevant drivers from the following URL : http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/index.html
2. Other possibility might be ........
The database is most likely not running on the Server. A listener alone does not provide a database connection; the database instance must also be started.
Action : Check if all the relevant services are started before proceeding.
3. Other option is
Go thru the entire setup once again by following a proper checklist of all items like
Oracle Service Names u have configured :
Port Numbers :
DB User Name/Password u would like to use for connection :
etc
I hope the above points might help
Thanks
PK -
Error during execution in background: No Test Package Selected
We have created a test package and tried to run both in foreground (Goto -> Automatic Test -> Execute) and background (Goto -> Automatic Test -> Execute in background). We are pretty confident that the test case included in the package works well.
Foreground run is successful. However, when we try to run using background mode, we get the error "No Test Package Selected." What could be the possible issue for this?Unsigned applets are not allowed to access the file system...
http://java.sun.com/developer/technicalArticles/Security/Signed/ -
4.7 ee ides installation last error---Error during execution of script
Hi am new to this forum.don't scold i f am i posting the query in right forum.
I am installing SAP 4.7 IDES
in the final stage i.e after 15 hrs of installation it give the problem,says that (FJS-0012 Error when executing the script it has been displayed in that error log)
please help
regards,
venkat.Hi,
Here i am attaching error logs.
Plz find it.
1) SAPVIEW.LOG
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: START OF LOG: 20100908204231
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#5 $ SAP
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: version R6.20/V1.2
E:\usr\sap\ERP\SYS\exe\run/R3load.exe -ctf I E:\dump\3\db3\EXPORT3/DATA/SAPVIEW.STR C:\SAPinst ORACLE KERNEL/DDLORA.TPL C:\SAPinst ORACLE KERNEL/SAPVIEW.TSK ORA -l C:\SAPinst ORACLE KERNEL/SAPVIEW.log -o D
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: job completed
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: END OF LOG: 20100908204232
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: START OF LOG: 20100909082652
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#5 $ SAP
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: version R6.20/V1.2
E:\usr\sap\ERP\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst ORACLE KERNEL/SAPVIEW.cmd -l C:\SAPinst ORACLE KERNEL/SAPVIEW.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=C:\oracle\ora81 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPERP's password
DbSl Trace: Connecting as /@ERP on connection 0 ...
DbSl Trace: Attaching to DB Server ERP (con_hdl=0,svchp=0027D4D0,svrhp=0027D2DC)
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D4D0,srvhp=0027D2DC,usrhp=0029083C)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPERP/<pwd>@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D4D0,srvhp=0027D2DC,usrhp=0029083C)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
Thu Sep 09 08:26:57 2010
***LOG BY2=> sql error 1034 performing CON [dblink#1 @ 419] [dblink 0419 ]
***LOG BY0=> ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist [dblink#1 @ 419] [dblink 0419 ]
(DB) ERROR: db_connect rc = 256
DbSl Trace: Logon as OPS$-user to get SAPERP's password
DbSl Trace: Connecting as /@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D4D0,srvhp=0027D2DC,usrhp=0029083C)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPERP/<pwd>@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D4D0,srvhp=0027D2DC,usrhp=0029083C)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: END OF LOG: 20100909082657
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: START OF LOG: 20100909083820
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#5 $ SAP
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: version R6.20/V1.2
E:\usr\sap\ERP\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst ORACLE KERNEL/SAPVIEW.cmd -l C:\SAPinst ORACLE KERNEL/SAPVIEW.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=C:\oracle\ora81 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPERP's password
DbSl Trace: Connecting as /@ERP on connection 0 ...
DbSl Trace: Attaching to DB Server ERP (con_hdl=0,svchp=0027D4D0,svrhp=0027D2DC)
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D4D0,srvhp=0027D2DC,usrhp=0029083C)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPERP/<pwd>@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D4D0,srvhp=0027D2DC,usrhp=0029083C)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
Thu Sep 09 08:38:25 2010
***LOG BY2=> sql error 1034 performing CON [dblink#1 @ 419] [dblink 0419 ]
***LOG BY0=> ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist [dblink#1 @ 419] [dblink 0419 ]
(DB) ERROR: db_connect rc = 256
DbSl Trace: Logon as OPS$-user to get SAPERP's password
DbSl Trace: Connecting as /@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D4D0,srvhp=0027D2DC,usrhp=0029083C)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPERP/<pwd>@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D4D0,srvhp=0027D2DC,usrhp=0029083C)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: END OF LOG: 20100909083825
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: START OF LOG: 20100909084828
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#5 $ SAP
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: version R6.20/V1.2
E:\usr\sap\ERP\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst ORACLE KERNEL/SAPVIEW.cmd -l C:\SAPinst ORACLE KERNEL/SAPVIEW.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=C:\oracle\ora81 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPERP's password
DbSl Trace: Connecting as /@ERP on connection 0 ...
DbSl Trace: Attaching to DB Server ERP (con_hdl=0,svchp=0027D4D0,svrhp=0027D2DC)
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D4D0,srvhp=0027D2DC,usrhp=0029083C)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPERP/<pwd>@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D4D0,srvhp=0027D2DC,usrhp=0029083C)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
Thu Sep 09 08:48:33 2010
***LOG BY2=> sql error 1034 performing CON [dblink#1 @ 419] [dblink 0419 ]
***LOG BY0=> ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist [dblink#1 @ 419] [dblink 0419 ]
(DB) ERROR: db_connect rc = 256
DbSl Trace: Logon as OPS$-user to get SAPERP's password
DbSl Trace: Connecting as /@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D4D0,srvhp=0027D2DC,usrhp=0029083C)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPERP/<pwd>@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D4D0,srvhp=0027D2DC,usrhp=0029083C)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: END OF LOG: 20100909084833
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: START OF LOG: 20100909091053
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#5 $ SAP
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: version R6.20/V1.2
E:\usr\sap\ERP\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst ORACLE KERNEL/SAPVIEW.cmd -l C:\SAPinst ORACLE KERNEL/SAPVIEW.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=C:\oracle\ora81 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPERP's password
DbSl Trace: Connecting as /@ERP on connection 0 ...
DbSl Trace: Attaching to DB Server ERP (con_hdl=0,svchp=0027D4D0,svrhp=0027D2DC)
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D4D0,srvhp=0027D2DC,usrhp=0029083C)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPERP/<pwd>@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D4D0,srvhp=0027D2DC,usrhp=0029083C)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
Thu Sep 09 09:10:58 2010
***LOG BY2=> sql error 1034 performing CON [dblink#1 @ 419] [dblink 0419 ]
***LOG BY0=> ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist [dblink#1 @ 419] [dblink 0419 ]
(DB) ERROR: db_connect rc = 256
DbSl Trace: Logon as OPS$-user to get SAPERP's password
DbSl Trace: Connecting as /@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D4D0,srvhp=0027D2DC,usrhp=0029083C)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPERP/<pwd>@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D4D0,srvhp=0027D2DC,usrhp=0029083C)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: END OF LOG: 20100909091058
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: START OF LOG: 20100909094253
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#5 $ SAP
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: version R6.20/V1.2
E:\usr\sap\ERP\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst ORACLE KERNEL/SAPVIEW.cmd -l C:\SAPinst ORACLE KERNEL/SAPVIEW.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=C:\oracle\ora81 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPERP's password
DbSl Trace: Connecting as /@ERP on connection 0 ...
DbSl Trace: Attaching to DB Server ERP (con_hdl=0,svchp=0027D4D0,svrhp=0027D2DC)
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D4D0,srvhp=0027D2DC,usrhp=0029083C)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPERP/<pwd>@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D4D0,srvhp=0027D2DC,usrhp=0029083C)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
Thu Sep 09 09:42:58 2010
***LOG BY2=> sql error 1034 performing CON [dblink#1 @ 419] [dblink 0419 ]
***LOG BY0=> ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist [dblink#1 @ 419] [dblink 0419 ]
(DB) ERROR: db_connect rc = 256
DbSl Trace: Logon as OPS$-user to get SAPERP's password
DbSl Trace: Connecting as /@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D4D0,srvhp=0027D2DC,usrhp=0029083C)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPERP/<pwd>@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D4D0,srvhp=0027D2DC,usrhp=0029083C)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: END OF LOG: 20100909094258
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: START OF LOG: 20100910123913
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#5 $ SAP
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: version R6.20/V1.2
E:\usr\sap\ERP\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst ORACLE KERNEL/SAPVIEW.cmd -l C:\SAPinst ORACLE KERNEL/SAPVIEW.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=C:\oracle\ora81 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPERP's password
DbSl Trace: Connecting as /@ERP on connection 0 ...
DbSl Trace: Attaching to DB Server ERP (con_hdl=0,svchp=0027D470,svrhp=0027D27C)
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D470,srvhp=0027D27C,usrhp=00291BEC)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPERP/<pwd>@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D470,srvhp=0027D27C,usrhp=00291BEC)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
Fri Sep 10 12:39:18 2010
***LOG BY2=> sql error 1034 performing CON [dblink#1 @ 419] [dblink 0419 ]
***LOG BY0=> ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist [dblink#1 @ 419] [dblink 0419 ]
(DB) ERROR: db_connect rc = 256
DbSl Trace: Logon as OPS$-user to get SAPERP's password
DbSl Trace: Connecting as /@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D470,srvhp=0027D27C,usrhp=00291BEC)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPERP/<pwd>@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=0027D470,srvhp=0027D27C,usrhp=00291BEC)
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\ERP\SYS\exe\run/R3load.exe: END OF LOG: 20100910123918
2) when i got the error in the retry screen i Preesed the push button Viewlog Then i got this one.
PHASE 2010-09-10 12:32:53
SAP R/3 Enterprise 4.70 for Oracle
PHASE 2010-09-10 12:32:53
SAP Web Application Server
PHASE 2010-09-10 12:32:53
Request common parameters of SAP System
PHASE 2010-09-10 12:32:53
Create operating system accounts
PHASE 2010-09-10 12:32:53
Request operating system user information
PHASE 2010-09-10 12:32:54
Request operating system user information
PHASE 2010-09-10 12:32:54
Request operating system user information
PHASE 2010-09-10 12:32:54
Request operating system user information
PHASE 2010-09-10 12:32:54
Request operating system user information
PHASE 2010-09-10 12:32:54
Request operating system user information
PHASE 2010-09-10 12:32:54
Request operating system user information
PHASE 2010-09-10 12:32:55
Request operating system user information
PHASE 2010-09-10 12:32:55
Request operating system user information
PHASE 2010-09-10 12:32:55
Request operating system user information
PHASE 2010-09-10 12:32:55
Request operating system user information
PHASE 2010-09-10 12:32:55
Request operating system user information
PHASE 2010-09-10 12:32:55
Request operating system user information
PHASE 2010-09-10 12:32:55
Request operating system user information
PHASE 2010-09-10 12:32:55
Request operating system user information
PHASE 2010-09-10 12:32:55
Request operating system user information
PHASE 2010-09-10 12:32:55
Request operating system user information
PHASE 2010-09-10 12:32:55
Request operating system user information
PHASE 2010-09-10 12:33:00
Adapt filesystem
PHASE 2010-09-10 12:33:00
Prepare check/adapt SAP instance filesystem
PHASE 2010-09-10 12:33:00
Extract archives
PHASE 2010-09-10 12:33:01
Extract SAP System kernel archives
PHASE 2010-09-10 12:33:02
Create service ports
PHASE 2010-09-10 12:33:02
Generate instance profiles
PHASE 2010-09-10 12:33:02
Versionize default profile, instance profile and start profile
PHASE 2010-09-10 12:33:06
Database Load
INFO 2010-09-10 12:33:06
Copying file C:/SAPinst ORACLE KERNEL/keydb.xml to: C:/SAPinst ORACLE KERNEL/keydb.7.xml.
INFO 2010-09-10 12:33:06
Creating file C:\SAPinst ORACLE KERNEL\keydb.7.xml.
WARNING 2010-09-10 12:33:12
Error 1332 (No mapping between account names and security IDs was done.
) in execution of a 'SetEntriesInAcl' function, line (646), with parameter ().
INFO 2010-09-10 12:33:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2010-09-10 12:33:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2010-09-10 12:33:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2010-09-10 12:34:12
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSSEX1.log
ERROR 2010-09-10 12:34:12
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPAPPL1.log
ERROR 2010-09-10 12:34:12
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSSEX2.log
INFO 2010-09-10 12:34:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2010-09-10 12:34:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2010-09-10 12:34:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2010-09-10 12:35:12
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSSEX3.log
ERROR 2010-09-10 12:35:12
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPAPPL0.log
ERROR 2010-09-10 12:35:12
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPAPPL2.log
INFO 2010-09-10 12:35:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2010-09-10 12:35:13
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2010-09-10 12:35:13
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2010-09-10 12:36:13
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSDIC.log
ERROR 2010-09-10 12:36:13
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPCLUST.log
ERROR 2010-09-10 12:36:13
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPPOOL.log
INFO 2010-09-10 12:36:13
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2010-09-10 12:36:13
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2010-09-10 12:36:13
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2010-09-10 12:37:13
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSLEXC.log
ERROR 2010-09-10 12:37:13
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSSRC.log
ERROR 2010-09-10 12:37:13
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSDOCU.log
INFO 2010-09-10 12:37:13
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2010-09-10 12:37:13
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2010-09-10 12:37:13
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2010-09-10 12:38:13
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSPROT.log
ERROR 2010-09-10 12:38:13
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPUSER.log
ERROR 2010-09-10 12:38:13
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSLOAD.log
INFO 2010-09-10 12:38:13
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2010-09-10 12:39:13
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAP0000.log
INFO 2010-09-10 12:39:18
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2010-09-10 12:39:18
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPVIEW.log
ERROR 2010-09-10 12:39:18
FJS-00012 Error when executing script.
warmRegards,
Venkat. -
Because this line is giving error:
Notice: Undefined index: pagina in E:\wamp\www\html\conteudo.php on line 11.
Line 11 switch ($_GET['pagina'])
And
SCREAM: Error suppression ignored forLet me speak candidly (frankly). This is an absurd way for someone who has 'very little knowledge of HTML and CSS' to build this site. It's like trying to go from Venice to Rome by way of Barcelona.
Each page on your site should be a derivative of this code -
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>JOSE FERREIRA DA SILVA</title>
<link href="css/topo.css" rel="stylesheet" type="text/css" />
<link href="css/conteudo.css" rel="stylesheet" type="text/css" />
<link href="css/rodape.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="geral_conteudo">
<div id="box_left">
<ul>
<li><a href="home.html">Home</a></li>
<li><a href="servicos.html">Serviços</a></li>
<li><a href="contato.html">Contato</a></li>
</ul>
</div>
<div id="box_right">
<h2>Box direito</h2>
</div>
</div>
</body>
</html>
There are no tricky includes, no PHP, everything is straight forward and simple. There is no need and definitely no benefit to the contorted approach you have posted here, particularly for someone who is just learning! -
ERROR DURING TRIGGER EXECUTION
Hello
I need help on this issue.
I've a table with a INDEXTYPE (INDEXTYPE IS CTXSYS.CONTEXT;) on one Column
Every Time I Update,Insert,Delete one record I need to rebuild this Index or I can't access this modified Record
SO I Thought to built a Trigger that Calls a Procedure to Rebuild the Index AFTER UPDATE,INSERT or DELETE
Now when I Update or insert or Delete a record in the Table I get the Error Message :
SYS@cfmt > update IWS.ALUMNI_SEARCH set FIRST_NAME = 'TEST' where INTEGRATION_ID = 1000026;
update IWS.ALUMNI_SEARCH set FIRST_NAME = 'TEST' where INTEGRATION_ID = 1000026
ERROR at line 1:
ORA-00054: resource busy and acquire with NOWAIT specified
ORA-06512: at "IWS.REBUILD_ALUMDATA", line 15
ORA-06512: at "IWS.TRG_REB_ALUM", line 5
ORA-04088: error during execution of trigger 'IWS.TRG_REB_ALUM'
Any ideas
TRIGGER SCRIPT :
CREATE OR REPLACE TRIGGER IWS.TRG_REB_ALUM
AFTER
INSERT OR
UPDATE OR
DELETE ON
IWS.ALUMNI_SEARCH
FOR EACH ROW
DECLARE
BEGIN
IWS.REBUILD_ALUMDATA;
COMMIT;
END;
INDEX
CREATE INDEX ALUMNI_DATA ON ALUMNI_SEARCH
(ALUMNI_DATA)
INDEXTYPE IS CTXSYS.CONTEXT;Ah. Since you are using a desupported version, neither resync on commit nor transactional Text indexes. Any chance you could upgrade to a more recent version of the database?
If you are stuck on 9.2, are you really certain that you need the newly added rows available for searching immediately? That's a pretty unusual requirement for doing full-text searching. Any chance you could just schedule a periodic refresh every few minutes?
If you absolutely need immediate refreshes and you're stuck in a desupported database version, you could potentially have your trigger submit a job via the DBMS_JOB package that did your index rebuild asynchronously after your transaction committed (which would mimic the ON COMMIT attribute introduced in 10g). Since you are trying to do an ALTER INDEX, which is DDL, you won't be able to do that directly in a trigger. You might be able to call CTX_DDL.Sync_Index instead of issuing the ALTER INDEX, but I would wager that this has the same problem of doing implicit commits, and is thus ineligible to be called from a trigger.
Justin
Edited by: Justin Cave on Dec 12, 2008 1:04 PM
Generally, it's a bad idea to be using the SYS account for anything other than the small handful of administrative tasks that actually require logging in as SYS. You would generally want to use the appropriate object owner account, or at least a separate account that you created and granted appropriate privileges. SYS is special, and there are frequently behaviors that are different for SYS than other users that cause all sorts of confusion. Additionally, it's a bad idea from a security perspective to have people accessing the most powerful account in the database for routine operations.
Maybe you are looking for
-
No error message is displayed while deleting an attendee from a course.
Hi Experts, Mu customer is facing problem while trying to delete an attendee from a course under Training and event management. The path he is following is right: 1) In PSV1(Dynamic Attendance Menu)the employee is seen firmly booked in a course. 2)Ri
-
All apps/programs switch to Finder on their own... buggy.
Hello guys and gals... It's a simple but awful problem. No matter what I'm doing on my computer, any program/app I'm using will randomly switch to Finder on (it just happened while I was typing) it's own. At first I thought I activated a certain key
-
I am suddenly having trouble sending mail. I've checked my settings through ATT, they are correct and used their connection assistant which comes up as a green light. I'm receiving mail but just can't send it. They suggest delting the account onli
-
Hello, so yesterday I was normally using my Mac, as suddenly it went to a blackscreen then turn of an after a couble seconds a screen withe the on and of logo appeared saying somthing with you Computer was forced shut down or somethign like that. I i
-
How to get ringtones to show up in itunes
i have the new version of itunes i have tryed in view options but ringtones are not in there so how do i go into my rington on my computer itunes