Error executing SSIS remotely
I have a package that created and stored on SQL01.SSISDB catalog. The package has SQL Job Transfer task, which will connect to SQL02 and transfer jobs to SQL03. It works fine if i run this package from SQL01. As soon as I create a job on SQL02
to run this package (from SQL01), i get following error.
The validate method on the task failed, and return error code 0X80131501 (Failed to connect to server SQL01) The validate method must succeed and indicate the result using an "Out" parameter.
The job is running under agent service which is local admin on all servers. SPN is registered for all servers as well.
Notice another thing: If i go on SQL02 box and connect to SQL01 via SSMS and validate package, i get the same error.
Can someone help here?
Hi Jaimin1125,
Based on my research, the error always related to the Protection level property. Could you please tell us what’s the value of the property for your package?
Please set the SSIS Package ProtectionLevel property to EncryptSensitiveWithPassword to see if it works. Change
Package Proprties Window >ProtectionLevel -- Change that to EncryptSensitiveWithPassword PackagePassword -- enter password-> somepassword
If possible, we can also set the SSIS Package ProtectionLevel property to
DontSaveSensitive to test again.
The following similar threads are for your references:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/6e88ef9b-b4f1-43c6-bbf1-379a0c08f1a4/the-validate-method-on-the-task-failed-and-returned-error-code-0x80131501-when-execute-through?forum=sqlintegrationservices
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/53e41e6f-dbd2-43d8-9ef5-36825e451f58/transfer-table-using-sql-server-authentication?forum=sqlintegrationservices
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Similar Messages
-
Error executing SSIS packages from Agent
Hi All,
I designed SSIS package that loads data from Oracle table to SQl server table along with loading data into Diension and fact tables using SSIS packages only. First I created all SSIS packages that loads data into Staging tables from
Oracle table in next level loading data into Dimension table and final level is loading data into Fact table. At lasts I created One master package there I'm calling all packages (Execute package task) differently.
Configuration type: Parent package configuration for All child packages. XML config for parent package.
When I execute SSIS package from BIDS data is loading up to Fact table. When I execute SSIS packages through Sql server agent ( Using File System Deployment)When I execute SSIS package from Sql server agent it is throwing an error message like
Message
Executed as user: . Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 10:45:10 PM Error: 2013-10-17 22:45:12.60
Code: 0xC00220E6 Source: Master Data Description: There is no project to reference. End Error Error: 2013-10-17 22:45:12.61 Code: 0xC0024107 Source:
Master Data Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:45:10 PM Finished: 10:45:13 PM Elapsed:
2.59 seconds. The package execution failed. The step failed.
I'm uploaded config file also while at the time of scheduling job.
Regards,
Praveen
Regards, PraveenHi Praveen,
The issue may occur if the SQL Server Agent Service Account or Proxy account doesn’t have sufficient permissions. Please create a SQL Server Agent Proxy account that has the permissions to execute the package and perform update operations on the SQL Server
fact tables.
Reference:
http://technet.microsoft.com/en-us/library/ms175834.aspx
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
*Error executing SSIS Package from BPC 5.1*
All -
I'm trying to execute a perfectly working SSIS package from BPC 5.1. When I execute the package it instantly completes executing (Failure) with nothin written to the Log file.
After doing further analysis, we have found the root cause to be "Sequence Containers" in SSIS Packages. We can execute the same package if we remove the sequence container.
When we try to edit the SSIS package via BPC, containing the Sequence Containers", we receive the following error:
[QuerytoServer] An error occurred while getting a package information. System.InvalidCastException: Unable to cast object of type 'Microsoft.SqlServer.Dts.Runtime.Sequence' to type 'Microsoft.SqlServer.Dts.Runtime.TaskHost' at Osoft.Services.Application.DataMgr.PackageExecute.DTSX.GetPackageInfor()
When we try to edit SSIS packages via BPC, containing NO Sequence Containers", everything is wonderful.
Does anyone have any suggestions, besides removing all of the Sequence Containers and moving the tasks to the base SSIS package level?
I trully appreciate any help you guys can provide.Hi Lars,
Could you be more specific the step you did?
1. It works fine in Visual Studio,
2. It is not working with Excel Front-end. Call the package from Excel.
3. It worked few days ago, ==> Do you mean it was working with #2 step?
I think this might be caused by authentication,
1. could you check your athentication you have for #1 and #2?
2. Did you introduce BPC DM to call the package? BPC DM uses impersonated ID even you use ID which has restrictive to use system resource, there will be no problem for the authentication.
3. As you see the log, it points FLOW task and OLEDB SOURCE, check your connection string in OLEDB SOURCE also.
Hope this helps,
Regards,
YH Seo -
Error while executing SSIS Package after upgrading the Oracle Client
Hello,
I am running to the below error after we upgraded the Oracle client to 11g from 10g. The source of the Data is Oracle database . Looked online but each error is pointing towards different route, Confused here any help is very much appreciated. Have to say
I am not a pro with SSIS.
SSIS package "Bentek_ISO_Package (2).dtsx" starting.
Information: 0x4004300A at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Warning: 0x80049304 at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator,
or on the system's console.
Information: 0x40043006 at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Pre-Execute phase is beginning.
Error: 0xC0202009 at Temp_tbl Injection Data Flow Task, OLE DB Source [1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80040E14 Description: "ORA-12801: error signaled in parallel query server P183, instance *****:qrmgmt2 (2)
ORA-01861: literal does not match format string".
An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-12801: error signaled in parallel query server P183, instance ****:qrmgmt2 (2)
ORA-01861: literal does not match format string".
Error: 0xC004701A at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: component "OLE DB Source" (1) failed the pre-execute phase and returned error code 0xC0202009.
Information: 0x4004300B at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: "component "OLE DB Destination" (52)" wrote 0 rows.
Information: 0x40043009 at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Cleanup phase is beginning.
Task failed: Temp_tbl Injection Data Flow Task
Warning: 0x80019002 at *******: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "****** (2).dtsx" finished: Failure.Do you have any Date conversion functions in your Oracle datetime fields? I did run into a similar issue when we upgraded the oracle client and the provider started to decipher the metadata of the date columns. The SSIS metadata conversion for the date
columns yielded dates that were not valid. I had to update my queries to use the TO_CHAR conversion to bring it out as a string and then save it to the date field.
TO_CHAR (DATE, 'MM/DD/YYYY HH24:MI:SS')
Regards, Dinesh -
Error while executing SSIS package which contains Script component through SQL Server Agent Job
Hello All,
I have written one SSIS 2012 package which is fetching records from CSV and put it into staging DB and from staging DB , using SSIS script component task, I am inserting data into Dynamics CRM. So far it is working fine when
I manually execute SSIS package.
but when I run the SSIS package using SQL server agent job, I encounter below error. After seeing below error at step "Insert TLM Headers Script Component " I understand that it is failing at script component which I have used in SSIS package,
but I am not sure what is the cause behind that? please advise.
Error:
Executed as user: domain\user account. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5556.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 1:21:41 PM Error: 2015-02-25
13:21:45.94 Code: 0xC0047062 Source: Insert TLM Headers Script Component [205] Description: System.ServiceModel.FaultException: The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs. Server stack trace: at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message
reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter) at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]: at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception
e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100
wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket) End Error Error: 2015-02-25 13:21:45.94 Code: 0xC0047022 Source: Insert TLM Headers SSIS.Pipeline
Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Script Component" (205) failed with error code 0x80131501 while processing input "Input 0" (215). The identified component returned an error
from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:41 PM Finished: 1:21:45 PM Elapsed: 4.009 seconds. The package execution failed. The step failed.
Thanks
Pankajdomain\user account has not proper rights
That being said, often SSIS jobs require a proxy to be runnable and this is how you make one up
http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
Arthur
MyBlog
Twitter -
Getting Error while Execute SSIS Package from Console Application
Dear All,
SSIS package working fine directly.
I got following error while execute SSIS package from C# console application.
The connection "{79D920D4-9229-46CA-9018-235B711F04D9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Cannot find the connection manager with ID "{79D920D4-9229-46CA-9018-235B711F04D9}" in the connection manager collection due to error code 0xC0010009. That connection manager is needed by "OLE DB Destination.Connections[OleDbConnection]"
in the connection manager collection of "OLE DB Destination". Verify that a connection manager in the connection manager collection, Connections, has been created with that ID.
OLE DB Destination failed validation and returned error code 0xC004800B.
One or more component failed validation.
There were errors during task validation.
Code :
public static string RunDTSPackage()
Package pkg;
Application app;
DTSExecResult pkgResults;
Variables vars;
app = new Application();
pkg = app.LoadPackage(@"D:\WORK\Package.dtsx", null);
Microsoft.SqlServer.Dts.Runtime.DTSExecResult results = pkg.Execute();
I have recreate the application with again new connection in SSIS.
Still not working, Please provide solution if any one have.
DB : SQL Server 2008 R2
Thanks and regards,
Hardik RamwaniThe connection "{79D920D4-9229-46CA-9018-235B711F04D9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Cannot find the connection manager with ID "{79D920D4-9229-46CA-9018-235B711F04D9}" in the connection manager collection due to error code 0xC0010009. That connection manager is needed by "OLE DB Destination.Connections[OleDbConnection]"
in the connection manager collection of "OLE DB Destination". Verify that a connection manager in the connection manager collection, Connections, has been created with that ID.
Are you sure that you are running the same package via .NET which works fine from Visual Studio?
By reading error message, I can say that you have copied OLEDB task from another package OR you have deleted one OLEDB connection manager. Now when package is run this task tries to use the connection manager and not found thus throws error message.
Open all OLEDB destination tasks and you find connection manager missing. Connection Manager name should be provided there
Cheers,
Vaibhav Chaudhari
MCSA - SQL Server 2012 -
An error occurred when executing a REMOTE FUNCTION CALL.
Dear all,
We have two syetms called DXD and GRD , we have a remote enabled function module in the DXD system , when i am trying to call this Function module from
GRD system it is going for the short dump, and giving the follwing error,
<b>Error analysis
An error occurred when executing a REMOTE FUNCTION CALL.
It was logged under the name "RFC_NO_AUTHORITY"
on the called page.</b>
But i do have the access for the DXD system also, i am really struggling to solve this problem, if any lights are there to help me , i will be thank full for then,
some body suggested for me that we need to maintain the Trusted system tables in the target system.
Thanks & regards
Satya.first u( user id ) have to get the Authorizations to use RFC ?
object will be like S_RFC or some thing like this.
when u get this kind of error just call /NSU53 then u will come to know which Authorization Object is missing from ur User Profile.
Regards
Prabhu -
Getting Error while trying to execute SSIS package through sql agent
Hi,
I have created a package in SSIS 2008.
I have created sql Agent job which runs perfectly on my Pc.
I tried to create anew job on another pc which doesnot have SSIS.
When i tried to run the Job,
i am getting folowing error:
Executed as user: LT-MAGFIH$. tion. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 8:51:31 PM Finished: 8:51:35 PM Elapsed: 4.024 seconds. The package execution failed. The step failed.
Please let me now how can i solve.Hi AjayChigurupati,
I would suggest you check you are install or use the dtexec utility correctly:
On a 64-bit computer, Integration Services installs a 64-bit version of the
dtexec utility (dtexec.exe). If you have to run certain packages in 32-bit mode, you will have to install the 32-bit version of the
dtexec utility. To install the 32-bit version of the
dtexec utility, you must select either Client Tools or Business Intelligence Development Studio during setup.
By default, a 64-bit computer that has both the 64-bit and 32-bit versions of an Integration Services command prompt utility installed will run the 32-bit version at the command prompt. The 32-bit version runs because the directory path for the 32-bit
version appears in the PATH environment variable before the directory path for the 64-bit version. (Typically, the 32-bit directory path is
<drive>:\Program Files(x86)\Microsoft SQL Server\100\DTS\Binn, while the 64-bit directory path is
<drive>:\Program Files\Microsoft SQL Server\100\DTS\Binn.)
For detail information, please see:
http://technet.microsoft.com/en-us/library/ms162810(v=sql.105).aspx
To using SQL Server Agent to Run a Package, please refer to the steps in th article below:
http://technet.microsoft.com/en-us/library/ms138023(v=sql.105).aspx
If you have any feedback on our support, please click
here.
Elvis Long
TechNet Community Support -
Suddenly started getting error: Unable to start program 'DTS' when try to execute SSIS Package
Me and my team member suddenly started getting following error when try to execute SSIS Package in SSDT (VS 2010)
I searched everywhere but virtually no information available about this Error. Anyone has suggestion on how to fix this error?
NOTE: Tried to execute package from command line and it works...
Error starting debugging.
ADDITIONAL INFORMATION:
Unable to start program 'DTS'.
Operation not supported. Unknown error: 0x80040038. (Microsoft Visual Studio Debugger)
Thanks,
Nayan
<a href="http://binaryworld.net/blogs"> Visit My Blog</a>Hi Nayan,
According to your description, the SSIS package works fine when you execute it with command line, when you execute it in SSDT, you got the error message: Unable to start program 'DTS'.
To troubleshoot the problem, I would suggest you to upgrade SSDT to latest patch. Please refer to the following steps:
Download and install the latest Microsoft SQL Server Service Pack.
Cumulative Update package SQL Server Service Pack.
Download and install Microsoft Visual Studio 2010 Feature Pack 2.
For more information about Visual Studio 2010 Feature Packs, please refer to the following document:
https://msdn.microsoft.com/en-us/vstudio/ff655021.aspx
If the problem remain unresolved, i would appreciate it if you could give us detailed information about the error, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support -
Problem with execute SSIS package from stored procedure
Hi,
I would like to execute SSIS package from stored procedure. Therefore, I implemented sp which exec SSISDB.CATALOG.CREATE_EXECUTION method. When I try to test it from SSMS on remote server, I got error that
I was able to solve by adding “WITH EXECUTE AS …”. Then I got another error: The server principal "Domain\user" is not able to access the database "SSISDB" under the current security context. On Internet, I found a couple post that describe
how to access SSIS catalog (one of them by Ke Yang -
http://blogs.msdn.com/b/mattm/archive/2012/03/20/ssis-catalog-access-control-tips.aspx). It didn’t help. I’m still getting the error message.
How to debug this issue?
Any suggestion?
Thanks
SQL Server 2014 BISSMS does not propagate user credentials thus the error
Arthur
MyBlog
Twitter -
How to Execute a Remote Procedure in Portal using Database Link
Hi,
I followed the instructions to create a Portal form for a remote procedure. But I am encountering the following error. Can someone advise what may be the cause?
Failed to execute - Missing string(create_package_body) language(us) domain (wwv) sub_domain (wwv_builder) (WWV-04300)
ORA-04020: deadlock detected while trying to lock object PUBLIC.PORTLET_SCHEMA (WWV-11230)
Failed to parse as PORTAL - (WWV-08300)
PURPOSE
How to execute a remote procedure in Portal using Database Link.
DESCRIPTION
This procedure assumes that you have two databases, one of which is remote, and Portal is configured in the other.
Remote Database A:
==================
1) Create a procedure as follows: Create or Replace PROCEDURE SCOTT.ADD_TWO_VALUES ( v_one IN NUMBER, v_two IN NUMBER, v_result OUT NUMBER) as begin v_result :=v_one+v_two; end; 2) Grant execute privileges to PUBLIC on the procedure.
Database B (where Portal is configured): ========================================
1) Create a public database link and choose to connect as a specific user (say SYSTEM). By default, in an Oracle 8i database, the "global_names" parameter in initSID.ora (or init.ora) file is set to "true". This Global Naming parameter enforces that a dblink has the same name as the database it connects to. Therefore, if the remote global database (A) name is "ora8.acme.com" then the database link should also be named as "ora8.acme.com".
2) Create a synonym for the procedure in Database A. Make sure you fully qualify the procedure name in the remote database (like SCOTT.ADD_TWO_VALUES).
3) Create a dynamic page to execute the procedure. The ORACLE tags in the dynamic page will look similar to the following: <ORACLE> DECLARE v_total NUMBER; BEGIN ADD_TWO_VALUES(:v_one,:v_two, v_total); htp.p('The total is => '); htp.p('<input type="TEXT" VALUE='||v_total||'>'); htp.para; htp.anchor('http://<machine.domain:port#>/pls/portal30/SCOTT.DYN_ADD_TWO_VALUES.show_parms', 'Re-Execute Procedure'); END; </ORACLE>
4) Portal does not have an option to create a form based on a synonym. Therefore, if you want to create a form instead of a dynamic page, create a wrapper procedure and then create a form based on this procedure. For example: Create or Replace PROCEDURE PORTAL30.ADD_TWO_VALUES_PR ( v_one IN NUMBER, v_two IN NUMBER, v_total OUT NUMBER) as begin add_two_values(v_one, v_two, v_total); end;
5) Grant execute privileges to PUBLIC on the procedure.hello...
any input will welcomed... Thanks.. -
Executing SSIS packages through SQL Server Jobs.
Hi,
I have an SSIS package which generates xml and text files and ftps it to an ftp site. When i run the package from BIDS it works successfully but when i run it from a job it fails. My SSIS package connects to DB server A and though i'm creating a job on DB
server A but my folder structure and the package resides in server B from where i'm connecting to DB server A through Management Studio. I'm using File system in SQL server Agent Job to call the package. When i execute the job i get following error:
Executed as user: I\A. ...er Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 5:08:05 PM Error: 2011-06-21 17:08:05.11
Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted. End Error Error: 2011-06-21 17:08:05.11 Description:
Failed to open package file "E:\P\H\R\Tools\R\R\R.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the
result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has . The step failed.
Could you please tell me where am i going wrong?
Thanks,
Deepti
DeeptiHi Christa Kurschat,
I'm running the job under proxy account. And that account has sysadmin permissions.
I used following script to create proxy account and run my package under that account:
I. Create job executor account
Highlight Security->New Login, say to make login as devlogin, type your password, default database can be your target database.
Server roles: check �sysadmin�
User mapping: your target database
Msdb database: you make sure to include
SQLAgentUserRole, SQLAgentReaderRole, SQLAgentOperatorRole
Then click OK
II. Create SQL proxy account and associate proxy account with job executor account
Here is the code and run it the query window.
Use master
CREATE CREDENTIAL [MyCredential] WITH IDENTITY = 'yourdomain\myWindowAccount', secret = 'WindowLoginPassword'
Use msdb
Sp_add_proxy @proxy_name='MyProxy', @credential_name='MyCredential'
Sp_grant_login_to_proxy @login_name=' devlogin', @proxy_name='MyProxy'
Sp_grant_proxy_to_subsystem @proxy_name='MyProxy', @subsystem_name='SSIS'
III. Create SSIS package
In MS SQL Server Business Intelligence Development Studio, you use job executor account devlogin to create the SSIS package (DTS) and make sure you can execute this package
in SQL Server Business Intelligence Development Studio. Compile/build this package.
IV. Create the job, schedule the job and run the job
In SQL Server Management Studio, highlight SQL Server Agent -> Start. Highlight Job ->New Job�, name it , myJob.
Under Steps, New Step, name it, Step1,
Type: SQL Server Integration Service Package
Run as: myProxy
Package source: File System
Browse to select your package file xxx.dtsx
Click Ok
Schedule your job and enable it
I followed these steps.
Thanks,
Deepti
Deepti -
Another Error Executing Database Query.
I am getting this error.
12:40:54.054 - Database Exception - in
C:\CFusionMX7\wwwroot\Author\dropdown2\EmployeeAddAction.cfm : line
26
Error Executing Database Query.
i have added extra fields in the mdb and added extra code to
the form page and the action page.
i am getting this error still.
this is how i broke it down.
If I run my 2 files EmployeeAddForm.cfm and
EmployeeAddAction.cfm
I get this error:
NOTE: if i take out the comments from the code and ignore the
new fields added to the db it works fine!!!!!
The web site you are accessing has experienced an unexpected
error.
Please contact the website administrator.
The following information is meant for the website developer
for debugging purposes.
Error Occurred While Processing Request
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC Microsoft Access Driver] Syntax error in
INSERT INTO statement.
Resources:
Enable Robust Exception Information to provide greater detail
about the source of errors. In the Administrator, click Debugging
& Logging > Debugging Settings, and select the Robust
Exception Information option.
Check the ColdFusion documentation to verify that you are
using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1;
SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
Remote Address 127.0.0.1
Referrer
http://127.0.0.1:8500/Author/dropdown2/EmployeeAddForm.cfm
Date/Time 06-Jun-07 12:40 PM
NOTE: if i take out the comments from the code and ignore the
new fields added to the db it works fine!!!!!Try using '###CreateODBCDate(Form.DateOfBirth)###'. Access is
strange on
handling dates. It has a been a while since I have used
Access so it could
be as simple as wrapping it single quotes as well. I am
assuming the
"<!-----------" wasn't intended, but I could be wrong.
Bryan Ashcraft (remove brain to reply)
Web Application Developer
Wright Medical Technology, Inc.
Macromedia Certified Dreamweaver Developer
Adobe Community Expert (DW) ::
http://www.adobe.com/communities/experts/
"Coldfusionstudent" <[email protected]>
wrote in message
news:[email protected]...
>I am getting this error.
> 12:40:54.054 - Database Exception - in
>
C:\CFusionMX7\wwwroot\Author\dropdown2\EmployeeAddAction.cfm : line
26
> Error Executing Database Query.
>
> i have added extra fields in the mdb and added extra
code to the form page
> and
> the action page.
> i am getting this error still.
> this is how i broke it down.
>
> If I run my 2 files EmployeeAddForm.cfm and
EmployeeAddAction.cfm
> I get this error:
>
> The web site you are accessing has experienced an
unexpected error.
> Please contact the website administrator.
>
> The following information is meant for the website
developer for debugging
> purposes.
>
> Error Occurred While Processing Request
> Error Executing Database Query.
> [Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC Microsoft
> Access Driver] Syntax error in INSERT INTO statement.
>
>
> Resources:
> Enable Robust Exception Information to provide greater
detail about the
> source
> of errors. In the Administrator, click Debugging &
Logging > Debugging
> Settings, and select the Robust Exception Information
option.
> Check the ColdFusion documentation to verify that you
are using the
> correct
> syntax.
> Search the Knowledge Base to find a solution to your
problem.
>
>
> Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT
5.1; SV1; .NET CLR
> 1.1.4322; .NET CLR 2.0.50727)
> Remote Address 127.0.0.1
> Referrer
http://127.0.0.1:8500/Author/dropdown2/EmployeeAddForm.cfm
> Date/Time 06-Jun-07 12:40 PM
>
>
>
> EmployeeAddForm.cfm
>
> <cfquery name="GetCompanies"
> datasource="#Request.MainDSN#">
> SELECT
> CompanyID,
> CompanyName
> FROM
> Company
> ORDER BY
> CompanyName
> </cfquery>
>
> <html>
> <head>
> <title>ColdFusion MX Bible</title>
> <link rel="stylesheet" href="styles.css">
> </head>
>
> <body>
>
> <h1> </h1>
>
> <table>
> <cfform action="EmployeeAddAction.cfm"
method="POST">
>
> <tr>
> <td>Company</td>
> <td>
> <cfselect name="CompanyID"
> size="1"
> query="GetCompanies"
> value="CompanyID"
> display="CompanyName"
> required="Yes"
> message="Please select a Company."></cfselect>
> </td>
> </tr>
>
> <tr>
> <td>SSN</td>
> <td>
> <cfinput type="Text"
> name="SSN"
> message="Please enter the employee's Social Security
Number."
> validate="social_security_number"
> required="Yes"
> size="12"
> maxlength="11">
> </td>
> </tr>
>
> <tr>
> <td>First Name</td>
> <td>
> <cfinput type="Text"
> name="Firstname"
> message="Please enter the employee's first name."
> required="Yes"
> size="22"
> maxlength="20">
> </td>
> </tr>
>
> <tr>
> <td>Last Name</td>
> <td>
> <cfinput type="Text"
> name="Lastname"
> message="Please enter the employee's last name."
> required="Yes"
> size="22"
> maxlength="20">
> </td>
> </tr>
>
> <tr>
> <td>Salary</td>
> <td>
> <cfinput type="Text"
> name="Salary"
> message="Please enter a valid salary."
> validate="float"
> required="Yes"
> size="22"
> maxlength="20">
> </td>
> </tr>
>
> <tr>
> <td>DOB</td>
> <td>
> <cfinput type="Text"
> name="DateOfBirth"
> message="Please enter a valid date of birth in the
format mm/dd/yyyy"
> validate="date"
> required="Yes"
> size="11"
> maxlength="10">
> </td>
> </tr><!-------------
> <tr>
> <td>device_typ</td>
> <td>
> <cfinput type="Text"
> name="device_typ"
> message="Please enter the employee's device_typ."
> required="Yes"
> size="22"
> maxlength="20">
> </td>
> </tr><tr>
> <td>device_Email</td>
> <td>
> <cfinput type="Text"
> name="device_Email"
> message="Please enter the employee's device_Email."
> required="Yes"
> size="22"
> maxlength="20">
> </td>
> </tr><tr>
> <td>Work_email</td>
> <td>
> <cfinput type="Text"
> name="Work_email"
> message="Please enter the employee's Work_email."
> required="Yes"
> size="22"
> maxlength="20">
> </td>
> </tr><tr>
> <td>Pin_Number</td>
> <td>
> <cfinput type="Text"
> name="Pin_Number"
> message="Please enter the employee's Pin_Number."
> required="Yes"
> size="22"
> maxlength="20">
> </td>
> </tr>------------------>
> <tr>
> <td> </td>
> <td>
> <input type="submit" value="Add to Database">
> </td>
> </tr>
>
> </cfform>
> </table>
>
> </body>
> </html>
> ---------------------------
> EmployeeAddAction.cfm
>
> <cfquery name="InsertEmployee"
> datasource="#Request.MainDSN#">
> INSERT INTO Employee(
> SSN,
> CompanyID,
> Firstname,
> Lastname,
> Salary,
> DateOfBirth<!----------,
> device_typ,
> device_Email,
> Work_email,
> Pin_Number-------------->
>
> )
> VALUES (
> '#Trim(Form.SSN)#',
> #Val(Form.CompanyID)#,
> '#Trim(Form.Firstname)#',
> '#Trim(Form.Lastname)#',
> #Val(Form.Salary)#,
> #CreateODBCDate(Form.DateOfBirth)#<!-----------,
> '#Trim(Form.device_typ)#',
> '#Trim(Form.device_Email)#',
> '#Trim(Form.Work_email)#',
> '#Trim(Form.Pin_Number)#'------------------>
> )
> </cfquery>
>
> <cfmail
to="#Form.Firstname#.#Form.Lastname#@somewhere.com"
> from="[email protected]"
> subject="Welcome to your new company!">
> Welcome to your new company, #Form.Firstname#
#Form.Lastname#!
> </cfmail>
> <!----
> <cflocation url="EmployeeList.cfm">----->
> -
Hi,
My CFC component is defined as:
<cffunction name="updateNote" output="false" access="remote" returntype="void" >
<cfargument name="notedetails" required="true" type="string" >
<cfargument name="notename" required="true" type="string" />
<cfquery name="qupdateNote" datasource="notes_db">
UPDATE
notes
SET
notes.notedetails=<CFQUERYPARAM CFSQLTYPE="CF_SQL_VARCHAR" VALUE="#ARGUMENTS.notedetails#">,
WHERE
notename="<CFQUERYPARAM CFSQLTYPE="CF_SQL_VARCHAR" VALUE="#ARGUMENTS.notename#">"
</cfquery>
</cffunction>
In Flash builder when I test the operation I get this error:
"There was an error while invoking the operation. Check your server settings and try invoking the operation again.
Reason: Server error Unable to invoke CFC - Error Executing Database Query. Parameter index out of range (2 > number of parameters, which is 1)."
Im really quessing that this is something small but right now its causing me to pull my hair out of my head!! Argg. Tried a bunch of things but I know thik im stuck.
Help would be very very appreciated.
ThanksCreate test.cfm along these lines:
<cfset myObj = createObject("component", "dotted.path.to.cfc.file")>
<cfset myResult = myObj.myMethod(arg=value1, etc)>
<cfdump var="#myResult#">
Or, really, you could just browse to this:
http://your.domain/path/to/your.cfc?method=yourMethod&arg1=value1 [etc]
Although I dunno which of those two approachs will give you a better error message (indeed, it might be the same).
Try both.
Adam -
I'm replicating between two servers in two sites (Server A - Server 2012 R2 STD, Server B - Server 2008 R2) over a VPN (Sonicwall Firewall). Though the initial replication seems to be
happening it is very slow (the folder in question is less than 3GB). I'm seeing these in the event viewer every few minutes:
The DFS Replication service is stopping communication with partner PPIFTC for replication group FTC due to an error. The service will retry the connection periodically.
Additional Information:
Error: 1726 (The remote procedure call failed.)
and then....
The DFS Replication service successfully established an inbound connection with partner PPIFTC for replication group FTC.
Here are all my troubleshooting steps (keep in mind that our VPN is going through a SonicWall <--I increased the TCP timeout to 24 hours):
-Increased TCP Timeout to 24 hours
-Added the following values on both sending and receiving members and rebooted server
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Value =DisableTaskOffload
Type = DWORD
Data = 1
Value =EnableTCPChimney
Type = DWORD
Data = 0
Value =EnableTCPA
Type = DWORD
Data = 0
Value =EnableRSS
Type = DWORD
Data = 0
---------------------------------more troubleshooting--------------------------
-Disabled AntiVirus on both members
-Made sure DFSR TCP ports 135 & 5722 are open
-Installed all hotfixes for 2008 R2 (http://support.microsoft.com/kb/968429) and rebooted
-Ran NETSTAT –ANOBP TCP and the DFS executable results are listed below:
Sending Member:
[DFSRs.exe]
TCP 10.x.x.x:53 0.0.0.0:0
LISTENING 1692
[DFSRs.exe]
TCP 10.x.x.x:54669
10.x.x.x:5722 TIME_WAIT 0
TCP 10.x.x.x:54673
10.x.x.x:5722 ESTABLISHED 1656
[DFSRs.exe]
TCP 10.x.x.x:64773
10.x.x.x:389 ESTABLISHED 1692
[DFSRs.exe]
TCP 10.x.x.x:64787
10.x.x.x:389 ESTABLISHED 1656
[DFSRs.exe]
TCP 10.x.x.x:64795
10.x.x.x:389 ESTABLISHED 2104
Receiving Member:
[DFSRs.exe]
TCP 10.x.x.x:56683
10.x.x.x:389 ESTABLISHED 7472
[DFSRs.exe]
TCP 10.x.x.x:57625
10.x.x.x:54886 ESTABLISHED 2808
[DFSRs.exe]
TCP 10.x.x.x:61759
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61760
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61763
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61764
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61770
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61771
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61774
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61775
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61776
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61777
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61778
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61779
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61784
10.x.x.x:52757 ESTABLISHED 7472
[DFSRs.exe]
TCP 10.x.x.x:63661
10.x.x.x:63781 ESTABLISHED 4880
------------------------------more troubleshooting--------------------------
-Increased Staging to 32GB
-Opened the ADSIedit.msc console to verify the "Authenticated Users" is set with the default READ permission on the following object:
a. The computer object of the DFS server
b. The DFSR-LocalSettings object under the DFS server computer object
-Ran
ping <var>10.x.x.x</var> -f -l 1472 and got replies back from both servers
-AD replication is successful on all partners
-Nslookup is working so DNS is working
-Updated NIC drivers on both servers
- I ran the following to set the Primary Member:
dfsradmin Membership Set /RGName:<replication group name> /RFName:<replicated folder name> /MemName:<primary member> /IsPrimary:True
Then Dfsrdiag Pollad /Member:<member name>
I'm seeing these errors in the dfsr logs:
20141014 19:28:17.746 9116 SRTR 957 [WARN] SERVER_EstablishSession Failed to establish a replicated folder session. connId:{45C8C309-4EDD-459A-A0BB-4C5FACD97D44} csId:{7AC7917F-F96F-411B-A4D8-6BB303B3C813}
Error:
+ [Error:9051(0x235b) UpstreamTransport::EstablishSession upstreamtransport.cpp:808 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:532 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:471 9116 C The content set is not ready]
---------------------------------------more troubleshooting-----------------------------
I've done a lot of research on the Internet and most of it is pointing to the same stuff I've tried. Does anyone have any other suggestions? Maybe I need to look somewhere
else on the server side or firewall side?
I tried replicating from a 2012 R2 server to another 2012 server and am getting the same events in the event log so maybe it's not a server issue.
Some other things I'm wondering:
-Could it be the speed of the NICs? Server A is a 2012 Server that has Hyper-V installed. NIC teaming was initially setup and since Hyper-V is installed the NIC is a "vEthernet
(Microsoft Network Adapter Multiplexor Driver Virtual Switch) running at a speed of 10.0Gbps whereas Server B is running a single NIC at 1.0Gbps
-Could occasional ping timeout's cause the issue? From time to time I get a timeout but it's not as often as the events I'm seeing. I'm getting 53ms pings. The folder
is only 3 GB so it shouldn't take that long to replicate but it's been days. The schedule I have set for replication is mostly all day except for our backup times which start at 11pm-5am. Throughout the rest of the time I have it set anywhere from
4Mbps to 64 Kbps. Server A is on a 5mb circuit and Server B is on a 10mb circuit.I'm seeing the same errors, all servers are running 2008 R2 x64. Across multiple sites, VPN is steady and reliably.
185 events from 12:28:21 to 12:49:25
Events are for all five servers (one per office, five total offices, no two in the same city, across three states).
Events are not limited to one replication group. I have quite a few replication groups, so I don't know for sure but I'm running under the reasonable assumption that none are spared.
Reminder from original post (and also, yes, same for me), the error is: Error: 1726 (The remote procedure call failed.)
Some way to figure out what code triggers an Event ID 5014, and what code therein specifies an Error 1726, would extremely helpful. Trying random command line/registry changes on live servers is exceptionally unappealing.
Side note, 1726 is referenced here:
https://support.microsoft.com/kb/976442?wa=wsignin1.0
But it says, "This RPC connection problem may be caused by an unstable WAN connection." I don't believe this is the case for my system.
It also says...
For most RPC connection problems, the DFS Replication service will try to obtain the files again without logging a warning or an error in the DFS Replication log. You can capture the network trace to determine whether the cause of the problem is at the network
layer. To examine the TCP ports that the DFS Replication service is using on replication partners, run the following command in a
Command Prompt window:
NETSTAT –ANOBP TCP
This returns all open TCP connections. The connections in question are "DFSRs.exe", which the command won't let you filter for.
Instead, I used the NETSTAT command as advertised, dumping output to info.txt:
NETSTAT -ANOBP TCP >> X:\info.txt
Then I opened Excel and manually opened the .TXT for the open wizard. I chose fixed-width fields based on the first row for each result, and then added a column:
=IF(A3="Can not", "Can not obtain ownership information", IF(LEFT(A3,1) = "[", A3&B3&C3, ""))
Dragging this down through the entire file let me see that row (Row F) as the file name. Some anomalies were present but none impacted DFSrs.exe results.
Finally, you can sort/filter (I sorted because I like being able to see everything, should I choose to) to get just the results you need, with the partial rows removed from the result set, or bumped to the end.
My server had 125 connections open.
That is a staggering number of connections to review, and I feel like I'm looking for a needle in a haystack.
I'll see if I can find anything useful out, but a better solution would be most wonderful.
Maybe you are looking for
-
Data Migration - SSIS Transfer SQL Server Objects Task or something else
Can someone please kindly help me with this. Scenario I have a requirement to transfer selected tables and views (with a specific schema) between two databases which reside in two different servers. In the interest of clarity I will call my databases
-
How can I log in a new apple id in itunes on my ipad? I don't have a credit card.
How can I log in a new apple id in itunes on my ipad? I don't have a credit card.
-
File Content Conversion (receiver) and special characters
Hi all, I have a scenario that has a file receiver channel with content conversion. The record structure in the flat file is field-width delimited (hence no field separator) and the parameter 'fieldLengthTooShortHandling' has the value 'Cut' because
-
Updation of Primary Key in HR Table(PA2001)
Can anyone please tell me how to update a primary key field in HR Tables (PA2001 and PA2002). I need to update <b>sprps</b> field in both the tables. I used HR_Infotype_Operation function module, but still it is not updating the field. Pls find the f
-
What Mac App will allow me to add captions to my photos?
I want to add captions to various places on my photos... how can I do this in iPhoto and/or Aperture? Thanks