Error from Console -/sudo writable by non-owner (041775)
I'm consistentlyu getting the following, which appears to be an error, whenever I open a console session:
-sudo: /var/db/sudo writable by non-owner (041775), should be mode 0700
I'm not sure what this means or how to fix it. I'm concerned about Admin rights, access etc. I'm running 10.7.4 as a standalone mac, not server.
Thanks!
Choose Go to Folder from the Finder's Go menu, provide /private/var/db/ as the path, select sudo, choose Get Info from the File menu, clear all the entries under Ownership & Permissions except for system and everyone, and set everyone to No Access.
You may want to repair permissions as well.
(68806)
Similar Messages
-
I get the following error message in the admin error log when I try to backup the DS database using the console.
failure: admin40_task_access_eval(): unable to find registered server (slapd-sun250)
any ideas? I can maintain the database and use db2ldif as well as db2bak command line uitls. I cannot see the logs with the console either.Reason why I see, these using version 4.0. I recommend to you install version 4.2
-
"System running low on direct mapped memory " Error on Console
Hi,
Our ACE Primary device got hang its not responded to management or console access. After rebooting the device everything is came to normal, but we are getting the following error from console.
901001 <2>Dec 11 15:42:20 kernel: System running low on direct mapped memory
901001 <2>Dec 11 15:42:20 kernel: Please issue 'show processes memory' and 'show system kmem' to diagnose further
901001 <2>Dec 11 15:42:21 kernel: Available CP memory reached below 5 percent threshold, TotalMemFree: 312201216 bytes, High MemFree: 305004544 bytes
Kindly suggest why this error message is generatting and it will effect the box performance.
SoftWare version : A4(2.0)Hi Ranjith,
It does seem to be the DDTS you are hitting. Please discuss with your account team and upgrade for the fix.
You may also be interested in related DDTS: Both of the below DDTS are related. Reload of the device fixes the issue but only for a while. You may have to reload when you see this message again and available memory is below 15%.
CSCtx41399
CSCtz29117
Regards,
Kanwal -
Calling ctx_snippet() from non-owner user returns error
Hi,
I created a full text index in owner schema A for documents stored in BFILE datatype, and tested the snippet query, worked like dream.
The query is something like:
SELECT doc_id, ctx_doc.snippet('A.IDX_DUMMY',rowid,'keywords')
FROM A.documents
WHERE contains(document,'keywords')>0
But, when I run the same query from an application user, I got error:
ERROR at line 1:
ORA-20000: Oracle Text error:
DRG-50857: oracle error in drstldef
ORA-22286: insufficient privileges on file or directory to perform FILEEXISTS
operation
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.CTX_DOC", line 1297
ORA-06512: at line 1
If I SQL*Plus using application user account, and run DBMS_LOB programs, the document BFILEs can be accessed without any problem.
I also tried log in as sys, the query return the same error.
I also specifically give directory read privilege to application user, CTX_SYS, all did not work.
Any clue here?
Thx,
-HaijunSolved!!!
The reason is that, initially, the directory read privilege was granted to index owner user as well as the non-owner user by sys as dba, without "with grant option"
Now, I grant directory read privilege to the index owner user "with grant option", then the index owner grant the privilege again to the non-owner user. Now, things work! The privilege flows through.
Thx,
-Haijun -
Exchange 2010 Public Folders Cannot Change Permissions Errors from Management Console and Powershell
This problem does not affect new public folders, only old ones that have probably been on Exchange 2000/2003 servers in the past. Migrations I believe did go smoothly but now have errors.
Error Reported is:
Microsoft Exchange Error
The following error(s) occurred while saving changes:
Add-PublicFolderClientPermission
Failed
Error:
Failed to modify the MAPI.NET table property of the object "000000001A447390AA6611CD9BC800AA002FC45A030064004E9CC2F8DD46B5E1E4578DE6D8030000000278E90000" on server "FQDN.Server.Name". See inner exception for more information.
MapiExceptionNonCanonicalACL: Unable to modify table. (hr=0x80004005, ec=2409)
Diagnostic context:
Lid: 40487 EMSMDBMT.EcDoRpcExt2 called [length=218]
Lid: 56871 EMSMDBMT.EcDoRpcExt2 returned [ec=0x0][length=356][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropModifyACL [64]
Lid: 17082 ROP Error: 0x969
Lid: 27745
Lid: 21921 StoreEc: 0x969
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropModifyACL [64]
Lid: 22086
Lid: 27128
Lid: 27232 StoreEc: 0x8004010F
Lid: 27128
Lid: 27232 StoreEc: 0x8004010F
Lid: 22086
Lid: 21970 StoreEc: 0x8004010F PropTag: 0x3D210102
Lid: 19149 Error: 0x0
Lid: 24509 Error: 0x0
Lid: 31229 Error: 0x0
Lid: 21970 StoreEc: 0x8004010F PropTag: 0x668F0040
Lid: 6671 StoreEc: 0x8004010F
Lid: 24976
Lid: 24952
Lid: 25472
Lid: 7972 StoreEc: 0x969
Lid: 26532
Lid: 4920 StoreEc: 0x969
Lid: 5119 StoreEc: 0x969
Lid: 5247 StoreEc: 0x969
Lid: 17916 StoreEc: 0x969
Lid: 4814 StoreEc: 0x969
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x969
Lid: 29150
Lid: 20446 StoreEc: 0x969
OK
From ExFolders we get error "Exception: Object Reference not set to an instance of an object"
Any thought on how to fix permissions, people who already had permission in the past can see and access them OK and all objects, but we cannot change/update or remove permissons
We alos receive similar error from the powershell.Hi,
Could
you please add a new public folder hierarchies with ADSIEdit as following setups.
For how to use ADSIEdit ,you can access:
http://technet.microsoft.com/en-us/library/cc773354(WS.10).aspx
1.Run ADSIEdit, right click Exchange Administrative Group under “Configuration \ services \ Microsoft
Exchange \ Organization name \ Administrative groups”.
2.Select New Object.
3.Select msExchPublicFolderTreeContainer for the class and click Next.
4.Enter the following for the value:
Folder Hierarchies, click Next.
5.Click Finish.
6.Create
Public Folder Tree Object.
7.Right click CN=Folder Hierarchies -> New Object.
8.Selected msExchPFTree for the class.
9.For the value we entered, "Public Folders" and clicked next.
10.Clicked on the "More Attributes" button, selected msExchPFTreeType .
11.Set the value
to 1.
Note: This is very important that this value is set
to a value of 1 as This tells Exchange that this is a MAPI Tree.
12.Click Ok and then finish.
13.We then went
to the properties of the newly created "Public Folders" Tree object in
ADSIEdit.
14.Copy the distinguished name value
to the clipboard and then click cancel.
15.Navigate
to the Storage group that contains the Public
Folder Store for this server and get properties of the server.
16.Locate the msExchOwningPFTree attribute and paste in the value that was copied
from the Public folders Distinguish name attribute.
17.Restart the Information Store Service.
18.Mounted and dismount the PF store.
19.Open Outlook with administrator,give full permission to default owner.
Hope it can help you! -
Listener actually up as seen from backend but from console gets error
Hi
My SCAN listener is shown running from backend but is shown down from console.
response for listener shows below error.
Any suggestions/hints
Thanks
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 06-JUNE-2011 11:44:54 Copyright (c) 1991, 2010, Oracle. All rights reserved. Welcome to LSNRCTL, type "help" for information. LSNRCTL> Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1))) TNS-12541: TNS:no listener TNS-12560: TNS:protocol adapter error TNS-00511: No listener Linux Error: 2: No such file or directory LSNRCTL>Thank you for your help.
I am using a RAC database and this is the status
srvctl status scan_listenerSCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node oradb123
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is running on node oradb124
SCAN Listener LISTENER_SCAN3 is enabled
SCAN listener LISTENER_SCAN3 is running on node oradb124
srvctl config scan_listenerSCAN Listener LISTENER_SCAN1 exists. Port: TCP:1730
SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1730
SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1730
[ oradb469:/home/oracle ]
srvctl config scanSCAN name: oemcrsp-xyz.net, Network:
1/10.180.5.0/255.255.255.0/eth0
SCAN VIP name: scan1, IP: /oemcrsp-xyz.net/10.180.5.186
SCAN VIP name: scan2, IP: /oemcrsp-xyz.net/10.180.5.187
SCAN VIP name: scan3, IP: /oemcrsp-xyz.net/10.180.5.185 -
OpenScript ActionScript Error from Adobe Flash Player 9
I get a popup ActionScript Error from Adobe Flash Player 9 when trying to record a Flex Tree object using OpenScript 9.2.1.0 Production. Specifically, I click on the Triangle that opens/closes the view of the child nodes underneath the parent node of a Tree. Initially, the triangle arrow already pointing down and the child node is already showing. When I click on the triangle, the node underneath goes up and disappears under its parent node and the traingle is then pointing to the parent node.
When I click this triangle in Firefox without OpenScript recording, I don't get any errors, popups, or issues. It seems to work correctly. During OpenScript recording, the recording seems to crash with a popup that is titled "Adobe Flash Player 9" and has the text "An ActionScript error has occurred" with the following error message:
Error: Unable to find automation method 'mx.events.TreeEvent' for class '[object OSAutomationClass]'.
at mx.automation::AutomationManager/recordAutomatableEvent()[C:\work\flex\dmv_automation\projects\automation\src\mx\automation\AutomationManager.as:1680]
at mx.automation.delegates.core::UIComponentAutomationImpl/recordAutomatableEvent()[C:\work\flex\dmv_automation\projects\automation\src\mx\automation\delegates\core\UIComponentAutomationImpl.as:281]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.core::UIComponent/dispatchEvent()[E:\dev\3.1.0\frameworks\projects\framework\src\mx\core\UIComponent.as:9156]
at mx.controls::Tree/http://www.adobe.com/2006/flex/mx/internal::dispatchTreeEvent()[E:\dev\3.1.0\frameworks\projects\framework\src\mx\controls\Tree.as:3334]
at mx.controls::Tree/http://www.adobe.com/2006/flex/mx/internal::onTweenEnd()[E:\dev\3.1.0\frameworks\projects\framework\src\mx\controls\Tree.as:2193]
at mx.effects::Tween/endTween()[E:\dev\3.1.0\frameworks\projects\framework\src\mx\effects\Tween.as:524]
at mx.effects::Tween/http://www.adobe.com/2006/flex/mx/internal::doInterval()[E:\dev\3.1.0\frameworks\projects\framework\src\mx\effects\Tween.as:565]
at mx.effects::Tween$/timerHandler()[E:\dev\3.1.0\frameworks\projects\framework\src\mx\effects\Tween.as:179]
at flash.utils::Timer/_timerDispatch()
at flash.utils::Timer/tick()
I can click "Dismiss All" from the Adobe popup and Firefox isn't affected. Openscript doesn't appear to have any issues and the recording can be continued or stopped. It records the click on the tree and the "Dismiss All" from the popup both as "Click object("@id='main'") as type "web" instead of "flexFT".
I am using OATS 9.2.1.0 with Firefox 3.6.17. I am testing a Flex 3.3 SDK built application. I installed the Adobe Flash Player 9 that came with the Flex SDK 3.3 before installing OATS.
Any help on this issue is greatly appreciated.
Some other information that may prove to be useful: I cannot seem to get OpenScript to consistently play back the actions on the same tree described above. Sometimes it works and sometimes it does not. I've tried using "Select Tree", "Select List", and "Click Tree" and each one is inconsistent on playback. It will report "Target Not Found".
I have the console output for a "Target Not Found" failure below, where line 100 is ".select("GRID1>server1", TriggerEvent.Mouse," from the following Java generated on recording with OpenScript:
flexFT
.list(
15,
"/web:window[@index='0' or @title='My Title']/web:document[@index='0']/flex:application[@automationIndex='index:-1' and @label='' and @className='main' and @automationName='main' and @automationClassName='FlexApplication' and @id='main']/flex:canvas[@automationIndex='index:1' and @label='' and @className='mx.containers.Canvas' and @automationName='mainCanvas' and @automationClassName='FlexCanvas' and @id='mainCanvas']/flex:dividedBox[@automationIndex='index:16' and @label='' and @className='view.MainMediator' and @automationName='mediator' and @automationClassName='FlexDividedBox' and @id='mediator']/flex:accordion[@label='' and @automationName='index:0' and @id='null' and @automationIndex='index:0' and @className='mx.containers.Accordion' and @automationClassName='FlexAccordion']/flex:canvas[@automationIndex='index:1' and @label='My%20View2' and @className='view.my.MyNavigator' and @automationName='My%20View2' and @automationClassName='FlexCanvas' and @id='null']/flex:canvas[@label='' and @automationName='index:1' and @id='null' and @automationIndex='index:1' and @className='mx.containers.Canvas' and @automationClassName='FlexCanvas']/flex:list[@automationIndex='index:2' and @className='view.MyGridTree' and @automationName='index:2' and @automationClassName='FlexList' and @id='null']")
.select("GRID1>server1", TriggerEvent.Mouse,
KeyModifier.None);
think(1.0);
Console Output:
11:29:09,093 INFO [EntryPoint] Started with arguments: -port 7777 -jwg C:\OracleATS\OFT\test06_ff\test06_ff.jwg
11:29:09,250 INFO [EntryPoint] Received StartScriptEvent
11:29:09,250 INFO [EntryPoint] Running "test06_ff" ...
11:29:09,453 INFO [1] Initialized script service "oracle.oats.scripting.modules.utilities.api.UtilitiesService"
11:29:09,453 INFO [1] Initialized script service "oracle.oats.scripting.modules.browser.api.BrowserService"
11:29:09,453 INFO [1] Initialized script service "oracle.oats.scripting.modules.functionalTest.api.FunctionalTestService"
11:29:09,484 INFO [1] Initialized script service "oracle.oats.scripting.modules.webdom.api.WebDomService"
11:29:09,484 INFO [1] Initialized script service "oracle.oats.scripting.modules.flexFT.api.FlexFTService"
11:29:09,484 INFO [1] Initializing VU 1 for script test06_ff
11:29:21,546 INFO [1] Step: [1] Redirect (/Page1/)
11:29:21,718 INFO [1] Step: [2] Login Page (/main.html)
11:29:32,218 INFO [1] Step: [3] My Title (/main.html)
11:30:11,453 ERROR [1] Error in section Run at line (script.java:100). Target not found
oracle.oats.scripting.modules.flexFT.common.api.internal.exceptions.FlexFTException: Target not found
at oracle.oats.scripting.modules.flexFT.common.api.internal.utilities.FlexUtil.checkResults(FlexUtil.java:293)
at oracle.oats.scripting.modules.flexFT.api.elements.AbstractFlexFTElement.replayEvent(AbstractFlexFTElement.java:99)
at oracle.oats.scripting.modules.flexFT.api.elements.ListBase.select(ListBase.java:170)
at script.run(script.java:100)
at oracle.oats.scripting.modules.basic.api.IteratingVUser.run(IteratingVUser.java:325)
at oracle.oats.scripting.modules.basic.api.internal.IteratingAgent.run(IteratingAgent.java:717)
at java.lang.Thread.run(Thread.java:619)
11:30:11,453 ERROR [1] Iteration 1 failed at line (script.java:100). Target not found
oracle.oats.scripting.modules.flexFT.common.api.internal.exceptions.FlexFTException: Target not found
at oracle.oats.scripting.modules.flexFT.common.api.internal.utilities.FlexUtil.checkResults(FlexUtil.java:293)
at oracle.oats.scripting.modules.flexFT.api.elements.AbstractFlexFTElement.replayEvent(AbstractFlexFTElement.java:99)
at oracle.oats.scripting.modules.flexFT.api.elements.ListBase.select(ListBase.java:170)
at script.run(script.java:100)
at oracle.oats.scripting.modules.basic.api.IteratingVUser.run(IteratingVUser.java:325)
at oracle.oats.scripting.modules.basic.api.internal.IteratingAgent.run(IteratingAgent.java:717)
at java.lang.Thread.run(Thread.java:619)
11:30:12,468 INFO [1] Finished VU 1 for script test06_ff
Thanks,
JohnI get a popup ActionScript Error from Adobe Flash Player 9 when trying to record a Flex Tree object using OpenScript 9.2.1.0 Production. Specifically, I click on the Triangle that opens/closes the view of the child nodes underneath the parent node of a Tree. Initially, the triangle arrow already pointing down and the child node is already showing. When I click on the triangle, the node underneath goes up and disappears under its parent node and the traingle is then pointing to the parent node.
When I click this triangle in Firefox without OpenScript recording, I don't get any errors, popups, or issues. It seems to work correctly. During OpenScript recording, the recording seems to crash with a popup that is titled "Adobe Flash Player 9" and has the text "An ActionScript error has occurred" with the following error message:
Error: Unable to find automation method 'mx.events.TreeEvent' for class '[object OSAutomationClass]'.
at mx.automation::AutomationManager/recordAutomatableEvent()[C:\work\flex\dmv_automation\projects\automation\src\mx\automation\AutomationManager.as:1680]
at mx.automation.delegates.core::UIComponentAutomationImpl/recordAutomatableEvent()[C:\work\flex\dmv_automation\projects\automation\src\mx\automation\delegates\core\UIComponentAutomationImpl.as:281]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.core::UIComponent/dispatchEvent()[E:\dev\3.1.0\frameworks\projects\framework\src\mx\core\UIComponent.as:9156]
at mx.controls::Tree/http://www.adobe.com/2006/flex/mx/internal::dispatchTreeEvent()[E:\dev\3.1.0\frameworks\projects\framework\src\mx\controls\Tree.as:3334]
at mx.controls::Tree/http://www.adobe.com/2006/flex/mx/internal::onTweenEnd()[E:\dev\3.1.0\frameworks\projects\framework\src\mx\controls\Tree.as:2193]
at mx.effects::Tween/endTween()[E:\dev\3.1.0\frameworks\projects\framework\src\mx\effects\Tween.as:524]
at mx.effects::Tween/http://www.adobe.com/2006/flex/mx/internal::doInterval()[E:\dev\3.1.0\frameworks\projects\framework\src\mx\effects\Tween.as:565]
at mx.effects::Tween$/timerHandler()[E:\dev\3.1.0\frameworks\projects\framework\src\mx\effects\Tween.as:179]
at flash.utils::Timer/_timerDispatch()
at flash.utils::Timer/tick()
I can click "Dismiss All" from the Adobe popup and Firefox isn't affected. Openscript doesn't appear to have any issues and the recording can be continued or stopped. It records the click on the tree and the "Dismiss All" from the popup both as "Click object("@id='main'") as type "web" instead of "flexFT".
I am using OATS 9.2.1.0 with Firefox 3.6.17. I am testing a Flex 3.3 SDK built application. I installed the Adobe Flash Player 9 that came with the Flex SDK 3.3 before installing OATS.
Any help on this issue is greatly appreciated.
Some other information that may prove to be useful: I cannot seem to get OpenScript to consistently play back the actions on the same tree described above. Sometimes it works and sometimes it does not. I've tried using "Select Tree", "Select List", and "Click Tree" and each one is inconsistent on playback. It will report "Target Not Found".
I have the console output for a "Target Not Found" failure below, where line 100 is ".select("GRID1>server1", TriggerEvent.Mouse," from the following Java generated on recording with OpenScript:
flexFT
.list(
15,
"/web:window[@index='0' or @title='My Title']/web:document[@index='0']/flex:application[@automationIndex='index:-1' and @label='' and @className='main' and @automationName='main' and @automationClassName='FlexApplication' and @id='main']/flex:canvas[@automationIndex='index:1' and @label='' and @className='mx.containers.Canvas' and @automationName='mainCanvas' and @automationClassName='FlexCanvas' and @id='mainCanvas']/flex:dividedBox[@automationIndex='index:16' and @label='' and @className='view.MainMediator' and @automationName='mediator' and @automationClassName='FlexDividedBox' and @id='mediator']/flex:accordion[@label='' and @automationName='index:0' and @id='null' and @automationIndex='index:0' and @className='mx.containers.Accordion' and @automationClassName='FlexAccordion']/flex:canvas[@automationIndex='index:1' and @label='My%20View2' and @className='view.my.MyNavigator' and @automationName='My%20View2' and @automationClassName='FlexCanvas' and @id='null']/flex:canvas[@label='' and @automationName='index:1' and @id='null' and @automationIndex='index:1' and @className='mx.containers.Canvas' and @automationClassName='FlexCanvas']/flex:list[@automationIndex='index:2' and @className='view.MyGridTree' and @automationName='index:2' and @automationClassName='FlexList' and @id='null']")
.select("GRID1>server1", TriggerEvent.Mouse,
KeyModifier.None);
think(1.0);
Console Output:
11:29:09,093 INFO [EntryPoint] Started with arguments: -port 7777 -jwg C:\OracleATS\OFT\test06_ff\test06_ff.jwg
11:29:09,250 INFO [EntryPoint] Received StartScriptEvent
11:29:09,250 INFO [EntryPoint] Running "test06_ff" ...
11:29:09,453 INFO [1] Initialized script service "oracle.oats.scripting.modules.utilities.api.UtilitiesService"
11:29:09,453 INFO [1] Initialized script service "oracle.oats.scripting.modules.browser.api.BrowserService"
11:29:09,453 INFO [1] Initialized script service "oracle.oats.scripting.modules.functionalTest.api.FunctionalTestService"
11:29:09,484 INFO [1] Initialized script service "oracle.oats.scripting.modules.webdom.api.WebDomService"
11:29:09,484 INFO [1] Initialized script service "oracle.oats.scripting.modules.flexFT.api.FlexFTService"
11:29:09,484 INFO [1] Initializing VU 1 for script test06_ff
11:29:21,546 INFO [1] Step: [1] Redirect (/Page1/)
11:29:21,718 INFO [1] Step: [2] Login Page (/main.html)
11:29:32,218 INFO [1] Step: [3] My Title (/main.html)
11:30:11,453 ERROR [1] Error in section Run at line (script.java:100). Target not found
oracle.oats.scripting.modules.flexFT.common.api.internal.exceptions.FlexFTException: Target not found
at oracle.oats.scripting.modules.flexFT.common.api.internal.utilities.FlexUtil.checkResults(FlexUtil.java:293)
at oracle.oats.scripting.modules.flexFT.api.elements.AbstractFlexFTElement.replayEvent(AbstractFlexFTElement.java:99)
at oracle.oats.scripting.modules.flexFT.api.elements.ListBase.select(ListBase.java:170)
at script.run(script.java:100)
at oracle.oats.scripting.modules.basic.api.IteratingVUser.run(IteratingVUser.java:325)
at oracle.oats.scripting.modules.basic.api.internal.IteratingAgent.run(IteratingAgent.java:717)
at java.lang.Thread.run(Thread.java:619)
11:30:11,453 ERROR [1] Iteration 1 failed at line (script.java:100). Target not found
oracle.oats.scripting.modules.flexFT.common.api.internal.exceptions.FlexFTException: Target not found
at oracle.oats.scripting.modules.flexFT.common.api.internal.utilities.FlexUtil.checkResults(FlexUtil.java:293)
at oracle.oats.scripting.modules.flexFT.api.elements.AbstractFlexFTElement.replayEvent(AbstractFlexFTElement.java:99)
at oracle.oats.scripting.modules.flexFT.api.elements.ListBase.select(ListBase.java:170)
at script.run(script.java:100)
at oracle.oats.scripting.modules.basic.api.IteratingVUser.run(IteratingVUser.java:325)
at oracle.oats.scripting.modules.basic.api.internal.IteratingAgent.run(IteratingAgent.java:717)
at java.lang.Thread.run(Thread.java:619)
11:30:12,468 INFO [1] Finished VU 1 for script test06_ff
Thanks,
John -
Fontworker error in console: Cannot consume extension for
So I am looking at my error log console and I am getting these two errors over and over and over again non stop.
12/31/13 6:12:05.011 AM fontworker[581]: could not consume extension for /Library/Application Support/Apple/Fonts (4653b7013beefd827c834efa313632abc3b27440;00000000;00000000;0000000000000020;co m.apple.app-sandbox.read-write;00000000;00000000;0000000000000000;/library/appli cation support/apple/fonts) -- (12:Cannot allocate memory)
12/31/13 6:12:15.034 AM fontworker[581]: failed consuming extension 0 of 2
Anyone have insights on what these is and how to fix it? I searched on Google but didn't find anything related.
Thanks!Thanks for the advice. I was able to fix this issue with Font Nuke. The tool can remove font caches and that did the trick for me.
Additionaly, I recovered the missing “Font” folder from my time machine backup. It disappeared in January, no idea why. -
4.0EA1 Diff Carts Unable to compare carts when connected as non-owner
Unable to compare carts when connected as non-owner.
Background:
We have 2 identical environments and I want to compare their objects. I login as user3 with select_catalog_role
Steps:
Connect as user3 then populate two carts. One selecting tables from schema1 another cart selecting tables from schema2. Now run Diff Carts.
Behavior:
Text field for Connection is disabled: When there are 2 carts loaded Diff Carts does not allows to compare to Connection. This field remains disabled even when one of the cart tab is closed and Diff Carts is started again.
Unable to compare: Diffing with another cart has connection issues. Diff report shows error (table icon with exclamation mark).
For Schema1 it says
<schema1>.<table_name> using null connection.
Unable to compare objects.
Ensure that you have the required permissions.
You must own the objects or have select_catalog_role.
For schema2 it says
<user3>.<table_name> using null connection.
It is trying to find table for user3 although owner is schema2 in cart2I am able to reproduce your issues with the diff from cart ui and have filed a bug and identified a fix for it. The issue is that if the combo box is disabled, it remains disabled and the only way to get it enabled again is to restart sqldev.
When diffing between two carts, the connection that is used for the add to cart is used for the authorization so if you add it to the cart from user3, user3 will be used for permissions. This is the intended behavior. have also filed a bug for the error message with "null" for the connection. -
How to get actual error from Crystal Report
We are using Crystal report in web service.
We faced some problem due to crystal report unexpected error.
Refer the below error message.
Xception E NSF NSFZ1100 20100608 145511565 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService Showing a modal dialog box or form when the application is not running in UserInteractive mode is not a valid operation. Specify the ServiceNotification or DefaultDesktopOnly style to display a notification from a service application.
Xception E NSF NSFZ1100 20100608 145511972 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService at System.Windows.Forms.MessageBox.ShowCore(IWin32Window owner, String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon, MessageBoxDefaultButton defaultButton, MessageBoxOptions options, Boolean showHelp)
at System.Windows.Forms.MessageBox.Show(String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e, Boolean suppressMessage)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e)
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPageNumber()
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPage()
at CrystalDecisions.Windows.Forms.DocumentControl.ShowLastPage()
at CrystalDecisions.Windows.Forms.PageView.ShowLastPage()
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.TotalPageCount(ReportDocument Rpt)
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.Print(BaseReport RptDefinition)
at Biz.Nissan.Cats.CORE.REPORT.MCTLIST260Print.Print(IFData ifData)
at Biz.Nissan.W3.CATS.BC.Service.DistributeService.ExecuteMpp()
How we get the actual error from crystal report?
Thanks in AdvanceSame as
crystal report unexpected error in Web service (IIS)
Closing this thread.
Ludek -
I am getting this back:
TypeError: Error #2007: Parameter text must be non-null.
at flash.text::TextField/set text()
at AS3_Flash_Poll_PHP_MySQL_fla::WholePoll_1/completeHandler()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()
PHP code:
<?php
// ---------------------------------------- Section 1 -----------------------------------------------
// IMPORTANT!!!! Connect to MySQL database here(put your connection data here)
mysql_connect("ginaty05.fatcowmysql.com","fall2010","@regina") or die (mysql_error());
mysql_select_db("poll_2010") or die (mysql_error());
// When Flash requests the totals initially we run this code
if ($_POST['myRequest'] == "load_numbers") {
// Query the totals from the database
$sql1 = mysql_query("SELECT id FROM votingPoll WHERE choice='1'");
$choice1Count = mysql_num_rows($sql1);
$sql2 = mysql_query("SELECT id FROM votingPoll WHERE choice='2'");
$choice2Count = mysql_num_rows($sql2);
$sql3 = mysql_query("SELECT id FROM votingPoll WHERE choice='3'");
$choice3Count = mysql_num_rows($sql3);
echo "choice1Count=$choice1Count";
echo "&choice2Count=$choice2Count";
echo "&choice3Count=$choice3Count";
// ---------------------------------------- Section 2 -----------------------------------------------
// IF POSTING A USER'S CHOICE
if ($_POST['myRequest'] == "store_choice") {
//Obtain user IP address
$ip = $_SERVER['REMOTE_ADDR'];
// Create local variable from the Flash ActionScript posted variable
$userChoice = $_POST['userChoice'];
$sql = mysql_query("SELECT id FROM votingPoll WHERE ipaddress='$ip'");
$rowCount = mysql_num_rows($sql);
if ($rowCount == 1) {
$my_msg = "You have already voted in this poll.";
print "return_msg=$my_msg";
} else {
$sql_insert = mysql_query("INSERT INTO votingPoll (choice, ipaddress) VALUES('$userChoice','$ip')") or die (mysql_error());
$sql1 = mysql_query("SELECT * FROM votingPoll WHERE choice='1'");
$choice1Count = mysql_num_rows($sql1);
$sql2 = mysql_query("SELECT * FROM votingPoll WHERE choice='2'");
$choice2Count = mysql_num_rows($sql2);
$sql3 = mysql_query("SELECT * FROM votingPoll WHERE choice='3'");
$choice3Count = mysql_num_rows($sql3);
$my_msg = "Thanks for voting!";
echo "return_msg=$my_msg";
echo "&choice1Count=$choice1Count";
echo "&choice2Count=$choice2Count";
echo "&choice3Count=$choice3Count";
?>
AS3 code:
stop(); // Stop the timeline since it does not need to travel for this to run
// Assign a variable name for our URLVariables object
var variables1:URLVariables = new URLVariables();
// Build the varSend variable
var varSend1:URLRequest = new URLRequest("parse_my_poll.php");
varSend1.method = URLRequestMethod.POST;
varSend1.data = variables1;
// Build the varLoader variable
var varLoader1:URLLoader = new URLLoader;
varLoader1.dataFormat = URLLoaderDataFormat.VARIABLES;
varLoader1.addEventListener(Event.COMPLETE, completeHandler1);
// Set variable to send to PHP here for the varloader below
variables1.myRequest = "load_numbers";
// Send data to php file now, and wait for response using the COMPLETE event
varLoader1.load(varSend1);
function completeHandler1(event:Event):void{
count1_txt.text = "" + event.target.data.choice1Count;
count2_txt.text = "" + event.target.data.choice2Count;
count3_txt.text = "" + event.target.data.choice3Count;
// hide the little processing movieclip
processing_mc.visible = false;
// Initialize the choiceNum variable that we will use below
var choiceNum:Number = 0;
// Set text formatting colors for errors and success messages
var errorsFormat:TextFormat = new TextFormat();
errorsFormat.color = 0xFF0000; // bright red
var successFormat:TextFormat = new TextFormat();
successFormat.color = 0x00FF00; // bright green
// Button Click Functions
function btn1Click(event:MouseEvent):void{
choiceNum = 1;
choice_txt.text = choice1_txt.text;
function btn2Click(event:MouseEvent):void{
choiceNum = 2;
choice_txt.text = choice2_txt.text;
function btn3Click(event:MouseEvent):void{
choiceNum = 3;
choice_txt.text = choice3_txt.text;
// Button Click Listeners
btn1.addEventListener(MouseEvent.CLICK, btn1Click);
btn2.addEventListener(MouseEvent.CLICK, btn2Click);
btn3.addEventListener(MouseEvent.CLICK, btn3Click);
// Assign a variable name for our URLVariables object
var variables:URLVariables = new URLVariables();
// Build the varSend variable
var varSend:URLRequest = new URLRequest("parse_my_poll.php");
varSend.method = URLRequestMethod.POST;
varSend.data = variables;
// Build the varLoader variable
var varLoader:URLLoader = new URLLoader;
varLoader.dataFormat = URLLoaderDataFormat.VARIABLES;
varLoader.addEventListener(Event.COMPLETE, completeHandler);
// Handler for PHP script completion and return
function completeHandler(event:Event):void{
// remove processing movieclip
processing_mc.visible = false;
// Clear the form fields
choice_txt.text = "";
choiceNum = 0;
// Load the response from the PHP file
status_txt.text = event.target.data.return_msg;
status_txt.setTextFormat(errorsFormat);
if (event.target.data.return_msg == "Thanks for voting!") {
// Reload new values into the count texts only if we get a proper response and new values
status_txt.setTextFormat(successFormat);
count1_txt.text = "" + event.target.data.choice1Count;
count2_txt.text = "" + event.target.data.choice2Count;
count3_txt.text = "" + event.target.data.choice3Count;
// Add an event listener for the submit button and what function to run
vote_btn.addEventListener(MouseEvent.CLICK, ValidateAndSend);
// Validate form fields and send the variables when submit button is clicked
function ValidateAndSend(event:MouseEvent):void {
//validate form fields
if(!choice_txt.length) {
// if they forgot to choose before pressing the vote button
status_txt.text = "Please choose before you press vote.";
status_txt.setTextFormat(errorsFormat);
} else {
status_txt.text = "Sending...";
processing_mc.visible = true;
// Ready the variables for sending
variables.userChoice = choiceNum;
variables.myRequest = "store_choice";
// Send the data to the php file
varLoader.load(varSend);
} // close else after form validation
} // Close ValidateAndSend function ////////////////////////This error means that you are trying to set the text field but there is no data in the variable. As a first step, try to identify where this is happening, eg Is it the first call, or once you have submitted your data or only if you try to submit data second time?
Trace out the data that is returned for both completeHandlers to see if there is a missing var. Try this for "load_numbers" and "store_choice". Do it twice for "store_choice". Do you get back what you expected?
You could also try altering the php to return some fixed dummy variables, eg choice1Count=11&choice2Count=22&choice3Count=33, etc. If this works then you know that the error is in the PHP.
It looks to me like the issue is when you submit the data a second time and just get back the return_msg - the handler then tries to assign the choice1Count etc but doesn't have any count data back from the poll.php.
Test that there is data before assigning it, eg
if(event.target.data.choice1Count){
count1_txt.text = event.target.data.choice1Count;
count2_txt.text = event.target.data.choice2Count;
count3_txt.text = event.target.data.choice3Count; -
Hi - Still new to flash as3 and php -
it is a contact form page - user puts in information - i am to receive it in an email address their information
as well the variables get sent back from the php to the .swf file.
I am receiving these errors and not knowing how to fix them.
any help would be much appreciated. thank you in advance really.
below are the errors in flash - as3 code - and php code setup.
errors:
ActionScript 3 + PHP: TypeError: Error #2007: Parameter text must be non-null:
at flash.text::TextField/set text()
at kwangjaekim_fla::wholeform_16/completeHandler()
at flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/flash.net:URLLoader::onComplete()
my as3 code is the following:
// build variable name for the URL Variables loader
var variables:URLVariables = new URLVariables();
//Build the varSend variable
var varSend:URLRequest = new URLRequest("contact_parse.php");
varSend.method = URLRequestMethod.POST;
varSend.data = variables;
//Build the varLoader variable
var varLoader:URLLoader = new URLLoader;
varLoader.dataFormat = URLLoaderDataFormat.VARIABLES;
varLoader.addEventListener(Event.COMPLETE, completeHandler);
//handler for the PHP script completion and return of status
function completeHandler(event:Event):void{
//value is cleared at ""
name_txt.text = "";
contact_txt.text = "";
msg_txt.text = "";
//Load the response PHP here
status_txt.text = event.target.data.return_msg;
//Add event listener for submit button click
submit_btn.addEventListener(MouseEvent.CLICK, ValidateAndSend);
//function ValidateAndSend
function ValidateAndSend(event:MouseEvent):void{
//validate fields
if(!name_txt.length){
status_txt.text = "Please Enter Your Name";
}else if(!contact_txt.length){
status_txt.text = "Please Enter Your Contact Detail";
}else if(!msg_txt.length){
status_txt.text = "Please Enter Your Message";
}else {
// ready the variables in form for sending
variables.userName = name_txt.text;
variables.userContact = contact_txt.text;
variables.userMsg = msg_txt.text;
// Send the data to PHP now
varLoader.load(varSend);
submit_btn.addEventListener(MouseEvent.CLICK, function(){MovieClip(parent).gotoAndPlay(151)});
} // Close else condition for error handling
} // Close validate and send function
my php code is the following:
<?php
// Create local PHP variables from the info the user gave in the Flash form
$senderName = $_POST['userName'];
$senderEmail = $_POST['userContact'];
$senderMessage = $_POST['userMsg'];
// Strip slashes on the Local variables
$senderName = stripslashes($senderName);
$senderContact = stripslashes($senderContact);
$senderMessage = stripslashes($senderMessage);
//!!!!!!!!!!!!!!!!!!!!!!!!! change this to my email address !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
$to = "put iny me email address";
// Place sender Email address here
$from = "$senderContact ";
$subject = "Contact from your site";
//Begin HTML Email Message
$message = <<<EOF
<html>
<body bgcolor="#FFFFFF">
<b>Name</b> = $senderName<br /><br />
<b>Contact</b> = <a href="mailto:$senderContact">$senderEmail</a><br /><br />
<b>Message</b> = $senderMessage<br />
</body>
</html>
EOF;
//end of message
$headers = "From: $from\r\n";
$headers .= "Content-type: text/html\r\n";
$to = "$to";
mail($to, $subject, $message, $headers);
exit();
?>
thank you once again
jaythank you Ned -
i put in the trace line as you mentioned -
and this is what i received -
returns: undefined
TypeError: Error #2007: Parameter text must be non-null
at flash.text::TextField/set text()
at kwangjaekim_fla::wholeform_16/completeHandler()
at flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/flash.net:URLLoader::onComplete()
what does this mean exactly?
thank you for the help really -
Error from the session log between Informatica and SAP BI
HI friends,
I am working extraction from bi by Informatica 8.6.1.
now, I start the process Chain from bi, and I got a error from Informatica's session log.Pls help me to figure out what's going on during me execution.
Severity Timestamp Node Thread Message Code Message
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR TM_6228 Writing session output to log file [D:\Informatica\PowerCenter8.6.1\server\infa_shared\SessLogs\s_taorh.log].
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR TM_6014 Initializing session [s_taorh] at [Fri Dec 17 11:01:31 2010].
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR TM_6683 Repository Name: [RepService_dcinfa01]
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR TM_6684 Server Name: [IntService_dcinfa01]
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR TM_6686 Folder: [xzTraining]
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR TM_6685 Workflow: [wf_taorh] Run Instance Name: [] Run Id: [43]
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR TM_6101 Mapping name: m_taorh.
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR TM_6964 Date format for the Session is [MM/DD/YYYY HH24:MI:SS.US]
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR TM_6703 Session [s_taorh] is run by 32-bit Integration Service [node01_dcinfa01], version [8.6.1], build [1218].
INFO 2010-12-17 11:01:31 node01_dcinfa01 MANAGER PETL_24058 Running Partition Group [1].
INFO 2010-12-17 11:01:31 node01_dcinfa01 MANAGER PETL_24000 Parallel Pipeline Engine initializing.
INFO 2010-12-17 11:01:31 node01_dcinfa01 MANAGER PETL_24001 Parallel Pipeline Engine running.
INFO 2010-12-17 11:01:31 node01_dcinfa01 MANAGER PETL_24003 Initializing session run.
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING CMN_1569 Server Mode: [UNICODE]
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING CMN_1570 Server Code page: [MS Windows Simplified Chinese, superset of GB 2312-80, EUC encoding]
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING TM_6151 The session sort order is [Binary].
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING TM_6156 Using low precision processing.
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING TM_6180 Deadlock retry logic will not be implemented.
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING SDKS_38029 Loaded plug-in 300320: [PowerExchange for SAP BW - OHS reader plugin 8.6.1 build 183].
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING SDKS_38024 Plug-in 300320 initialization complete.
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING PCCL_97003 [WARNING] Real-time session is not enabled for source [AMGDSQ_IS_TAORH]. Real-time Flush Latency value must be 1 or higher for a session to run in real time.
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING SDKS_38016 Reader SDK plug-in intialization complete.
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING TM_6307 DTM error log disabled.
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING TE_7022 TShmWriter: Initialized
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING TM_6007 DTM initialized successfully for session [s_taorh]
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR PETL_24033 All DTM Connection Info: [<NONE>].
INFO 2010-12-17 11:01:31 node01_dcinfa01 MANAGER PETL_24004 PETL_24004 Starting pre-session tasks. : (Fri Dec 17 11:01:31 2010)
INFO 2010-12-17 11:01:31 node01_dcinfa01 MANAGER PETL_24027 PETL_24027 Pre-session task completed successfully. : (Fri Dec 17 11:01:31 2010)
INFO 2010-12-17 11:01:31 node01_dcinfa01 DIRECTOR PETL_24006 Starting data movement.
INFO 2010-12-17 11:01:31 node01_dcinfa01 MAPPING TM_6660 Total Buffer Pool size is 1219648 bytes and Block size is 65536 bytes.
INFO 2010-12-17 11:01:31 node01_dcinfa01 READER_1_1_1 OHS_99013 [INFO] Partition 0: Connecting to SAP system with DESTINATION = sapbw, USER = taorh, CLIENT = 800, LANGUAGE = en
INFO 2010-12-17 11:01:32 node01_dcinfa01 READER_1_1_1 OHS_99016 [INFO] Partition 0: BW extraction for Request ID [163] has started.
Edited by: bi_tao on Dec 18, 2010 11:46 AMINFO 2010-12-17 11:01:33 node01_dcinfa01 WRITER_1_*_1 WRT_8167 Start loading table [VENDOR] at: Fri Dec 17 11:01:32 2010
INFO 2010-12-17 11:01:33 node01_dcinfa01 WRITER_1_*_1 WRT_8168 End loading table [VENDOR] at: Fri Dec 17 11:01:32 2010
INFO 2010-12-17 11:01:33 node01_dcinfa01 WRITER_1_*_1 WRT_8141
Commit on end-of-data Fri Dec 17 11:01:32 2010
===================================================
WRT_8036 Target: VENDOR (Instance Name: [VENDOR])
WRT_8044 No data loaded for this target
INFO 2010-12-17 11:01:33 node01_dcinfa01 WRITER_1_*_1 WRT_8143
Commit at end of Load Order Group Fri Dec 17 11:01:32 2010
===================================================
WRT_8036 Target: VENDOR (Instance Name: [VENDOR])
WRT_8044 No data loaded for this target
INFO 2010-12-17 11:01:33 node01_dcinfa01 WRITER_1_*_1 WRT_8035 Load complete time: Fri Dec 17 11:01:32 2010
LOAD SUMMARY
============
WRT_8036 Target: VENDOR (Instance Name: [VENDOR])
WRT_8044 No data loaded for this target
INFO 2010-12-17 11:01:33 node01_dcinfa01 WRITER_1_*_1 WRT_8043 ****END LOAD SESSION****
INFO 2010-12-17 11:01:33 node01_dcinfa01 WRITER_1_*_1 WRT_8006 Writer run completed.
INFO 2010-12-17 11:01:33 node01_dcinfa01 MANAGER PETL_24031
RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
Thread [READER_1_1_1] created for [the read stage] of partition point [AMGDSQ_IS_TAORH] has completed. The total run time was insufficient for any meaningful statistics.
Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [AMGDSQ_IS_TAORH] has completed. The total run time was insufficient for any meaningful statistics.
Thread [WRITER_1_*_1] created for [the write stage] of partition point [VENDOR] has completed. The total run time was insufficient for any meaningful statistics.
INFO 2010-12-17 11:01:33 node01_dcinfa01 MANAGER PETL_24005 PETL_24005 Starting post-session tasks. : (Fri Dec 17 11:01:33 2010)
INFO 2010-12-17 11:01:33 node01_dcinfa01 MANAGER PETL_24029 PETL_24029 Post-session task completed successfully. : (Fri Dec 17 11:01:33 2010)
INFO 2010-12-17 11:01:33 node01_dcinfa01 MAPPING SDKS_38025 Plug-in 300320 deinitialized and unloaded with status [-1].
INFO 2010-12-17 11:01:33 node01_dcinfa01 MAPPING SDKS_38018 Reader SDK plug-ins deinitialized with status [-1].
INFO 2010-12-17 11:01:33 node01_dcinfa01 MAPPING TM_6018 The session completed with [0] row transformation errors.
INFO 2010-12-17 11:01:33 node01_dcinfa01 MANAGER PETL_24002 Parallel Pipeline Engine finished.
INFO 2010-12-17 11:01:33 node01_dcinfa01 DIRECTOR PETL_24013 Session run completed with failure.
INFO 2010-12-17 11:01:34 node01_dcinfa01 DIRECTOR TM_6022
SESSION LOAD SUMMARY
================================================
INFO 2010-12-17 11:01:34 node01_dcinfa01 DIRECTOR TM_6252 Source Load Summary.
INFO 2010-12-17 11:01:34 node01_dcinfa01 DIRECTOR CMN_1537 Table: [AMGDSQ_IS_TAORH] (Instance Name: [AMGDSQ_IS_TAORH]) with group id[1] with view name [Group1]
Rows Output [0], Rows Affected [0], Rows Applied [0], Rows Rejected[0]
INFO 2010-12-17 11:01:34 node01_dcinfa01 DIRECTOR TM_6253 Target Load Summary.
INFO 2010-12-17 11:01:34 node01_dcinfa01 DIRECTOR CMN_1740 Table: [VENDOR] (Instance Name: [VENDOR])
Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [0]
INFO 2010-12-17 11:01:34 node01_dcinfa01 DIRECTOR TM_6023
===================================================
INFO 2010-12-17 11:01:34 node01_dcinfa01 DIRECTOR TM_6020 Session [s_taorh] completed at [Fri Dec 17 11:01:33 2010]. -
Good Morning All,
One of our RMAN backups is failing with the following error message. Any suggestions would be greatly appreciated.
==================================================================================================
Starting backup at 12/30/2008 22:03:47
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 12/30/2008 22:03:47
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> ##BACKUP ARCHIVELOG ALL FORMAT '%d_bkp_al_%t_Set%s_Piece%p' delete input;
2>
3> # DELETE ARCHIVELOG UNTIL TIME 'SYSDATE-7';
4>
5> # check if database can be restored
6> # RESTORE DATABASE VALIDATE;
7>
8> # check if controlfile can be restored
9> ##RESTORE CONTROLFILE to '/backups/admin/custpr/custpr_bkp_cntlfile.ctl' VALIDATE;
10>
11> # check if archivelogs for the past two weeks can be restored
12> # RESTORE ARCHIVELOG FROM TIME 'SYSDATE-7' VALIDATE;
13>
14> # - Verify all backups on backup media are intact
15> # CROSSCHECK BACKUP OF DATABASE;
16>
17> # - Display a list of files that need to be backed up based on the retention
18> # policy. For this case study, files that don't have at least 1 backups
19> # will be reported.
20> REPORT NEED BACKUP;
RMAN retention policy will be applied to the command
RMAN retention policy is set to recovery window of 7 days
Report of files whose recovery needs more than 7 days of archived logs
File Days Name
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of report command at 12/30/2008 22:03:48
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> # - delete un-necessary backups. This command deletes backups based on the
2> # retention policy.
3> ######### commented out DELETE OBSOLETE - TSM not configured to delete on 68
4> #########DELETE OBSOLETE;
5>
6> # - get complete list of existing backups
7> LIST BACKUP;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of list command at 12/30/2008 22:03:49
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> #-end of file-
2> **end-of-file**
RMAN>
Edited by: ORA_UMAIR on Dec 31, 2008 7:51 AMThis Oracle Database is 9.2.0.6.0. Here is the complete log file. The RMAN script that I am using ran successfully many times before.
====================================================================================================
Recovery Manager: Release 9.2.0.6.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
connected to recovery catalog database
RMAN>
connected to target database: CUSTPR (DBID=525071053)
RMAN>
RMAN> #########################################################################
2> # LEVEL 0 BACKUP #
3> #########################################################################
4>
5> # Configure backups to be written to disk.
6> CONFIGURE DEFAULT DEVICE TYPE TO DISK;
old RMAN configuration parameters:
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
new RMAN configuration parameters:
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Set the retention policy to a recovery window of 7 days. This ensures that
2> # RMAN retains all backups needed to recover the database to any point in time
3> # in the last 7 days. You can use the DELETE OBSOLETE command to delete
4> # backups that are no longer required by the retention policy. To exclude a
5> # backup from consideration by the policy, you can use KEEP option with the
6> # BACKUP command.
7> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
old RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
new RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to use two disk channels for backup, restore, recovery, and
2> # maintenance operations.
3> CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
old RMAN configuration parameters:
CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
new RMAN configuration parameters:
CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to write disk backups to the /backup directory.
2> # The format specifier %t is replaced with a 4-byte timestamp, %s with the
3> # backup set number, and %p with the backup piece number.
4> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
old RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
new RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to back up the control file after each backup.
2> CONFIGURE CONTROLFILE AUTOBACKUP ON;
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to write controlfile autobackups to the /backup directory.
2> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Enable the backup optimization feature introduced in 9i to make sure that
2> # RMAN won't backup an archivelog or datafile if there already exists a backup
3> # of that file. The FORCE option can be used to override optimization on a
4> # specific BACKUP command.
5> CONFIGURE BACKUP OPTIMIZATION ON;
old RMAN configuration parameters:
CONFIGURE BACKUP OPTIMIZATION ON;
new RMAN configuration parameters:
CONFIGURE BACKUP OPTIMIZATION ON;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Use the SHOW ALL command to see the current configuration settings.
2> SHOW ALL ;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE 'SBT_TAPE' TO '%d_bkp_cf%F';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 1;
CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' FORMAT '%d_bkp_df%t_Set%s_Piece%p';
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/orahome2/custprdb/9.2.0/dbs/snapcf_custpr.f'; # default
RMAN>
RMAN> # The following commands are run each day to start the backup cycle.
2> # The steps are:
3> # - Take an incremental level 0 backup of the database. A level 0 backup is
4> # a complete backup of the entire file which can be used as the basis
5> # for a subsequent incremental backup.
6> # - Backup all archivelogs that have not already been backed up.
7> # - Delete on-disk archivelogs older than seven days.
8>
9> BACKUP INCREMENTAL LEVEL 0 FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p'
10> DATABASE maxsetsize 33G
11> PLUS ARCHIVELOG FORMAT '/backups/admin/custpr/%d_bkp_al%t_Set%s_Piece%p'
12> delete all input;
Starting backup at 12/30/2008 22:01:40
current log archived
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=11 devtype=DISK
channel ORA_DISK_1: starting archive log backupset
channel ORA_DISK_1: specifying archive log(s) in backup set
input archive log thread=1 sequence=8008 recid=7910 stamp=674638862
input archive log thread=1 sequence=8009 recid=7911 stamp=674671207
input archive log thread=1 sequence=8010 recid=7912 stamp=674697380
input archive log thread=1 sequence=8011 recid=7913 stamp=674780433
input archive log thread=1 sequence=8012 recid=7914 stamp=674784211
input archive log thread=1 sequence=8013 recid=7915 stamp=674863288
input archive log thread=1 sequence=8014 recid=7916 stamp=674863300
channel ORA_DISK_1: starting piece 1 at 12/30/2008 22:01:41
channel ORA_DISK_1: finished piece 1 at 12/30/2008 22:03:47
piece handle=/backups/admin/custpr/CUSTPR_bkp_al674863300_Set3083_Piece1 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:02:07
channel ORA_DISK_1: deleting archive log(s)
archive log filename=/custpr/arch/arch_custpr_8008.log recid=7910 stamp=674638862
archive log filename=/custpr/arch/arch_custpr_8009.log recid=7911 stamp=674671207
archive log filename=/custpr/arch/arch_custpr_8010.log recid=7912 stamp=674697380
archive log filename=/custpr/arch/arch_custpr_8011.log recid=7913 stamp=674780433
archive log filename=/custpr/arch/arch_custpr_8012.log recid=7914 stamp=674784211
archive log filename=/custpr/arch/arch_custpr_8013.log recid=7915 stamp=674863288
archive log filename=/custpr/arch/arch_custpr_8014.log recid=7916 stamp=674863300
Finished backup at 12/30/2008 22:03:47
Starting backup at 12/30/2008 22:03:47
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 12/30/2008 22:03:47
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> ##BACKUP ARCHIVELOG ALL FORMAT '%d_bkp_al_%t_Set%s_Piece%p' delete input;
2>
3> # DELETE ARCHIVELOG UNTIL TIME 'SYSDATE-7';
4>
5> # check if database can be restored
6> # RESTORE DATABASE VALIDATE;
7>
8> # check if controlfile can be restored
9> ##RESTORE CONTROLFILE to '/backups/admin/custpr/custpr_bkp_cntlfile.ctl' VALIDATE;
10>
11> # check if archivelogs for the past two weeks can be restored
12> # RESTORE ARCHIVELOG FROM TIME 'SYSDATE-7' VALIDATE;
13>
14> # - Verify all backups on backup media are intact
15> # CROSSCHECK BACKUP OF DATABASE;
16>
17> # - Display a list of files that need to be backed up based on the retention
18> # policy. For this case study, files that don't have at least 1 backups
19> # will be reported.
20> REPORT NEED BACKUP;
RMAN retention policy will be applied to the command
RMAN retention policy is set to recovery window of 7 days
Report of files whose recovery needs more than 7 days of archived logs
File Days Name
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of report command at 12/30/2008 22:03:48
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> # - delete un-necessary backups. This command deletes backups based on the
2> # retention policy.
3> ######### commented out DELETE OBSOLETE - TSM not configured to delete on 68
4> #########DELETE OBSOLETE;
5>
6> # - get complete list of existing backups
7> LIST BACKUP;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of list command at 12/30/2008 22:03:49
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> #-end of file-
2> **end-of-file**
RMAN>
Recovery Manager complete. -
Strange system log error from Photoshop CS4
Hi.
I keep getting this strange system log error from Photoshop CS4.
It comes after a wile when using PS CS4.
I tried to chance the memory settings and scratch disc to see if that helped. It didn't.
I also checked all my ram for anything bad. 16GB in my Mac Pro Intel OS X 10.5.6
Everything is updated to latest included Adobe apps.
This is the system log error
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** error: can't allocate region
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** set a breakpoint in malloc_error_break to debug
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: Adobe Photoshop CS4(305,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** error: can't allocate region
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** set a breakpoint in malloc_error_break to debug
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: Adobe Photoshop CS4(305,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** error: can't allocate region
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** set a breakpoint in malloc_error_break to debug
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: Adobe Photoshop CS4(305,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** error: can't allocate region
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** set a breakpoint in malloc_error_break to debug
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: Adobe Photoshop CS4(305,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** error: can't allocate region
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** set a breakpoint in malloc_error_break to debug
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: Adobe Photoshop CS4(305,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** error: can't allocate region
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** set a breakpoint in malloc_error_break to debug
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: Adobe Photoshop CS4(305,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** error: can't allocate region
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** set a breakpoint in malloc_error_break to debug
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: Adobe Photoshop CS4(305,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** error: can't allocate region
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** set a breakpoint in malloc_error_break to debug
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: Adobe Photoshop CS4(305,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** error: can't allocate region
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** set a breakpoint in malloc_error_break to debug
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: Adobe Photoshop CS4(305,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** error: can't allocate region
And it keeps on until i close Photoshop.
Please anybody ?? i cant figure out what this means.
Thx for help.
Erik SNow i get this system log error ?
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** error: can't allocate region
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** set a breakpoint in malloc_error_break to debug
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: Adobe Photoshop CS4(651,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** error: can't allocate region
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** set a breakpoint in malloc_error_break to debug
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: Adobe Photoshop CS4(651,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** error: can't allocate region
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** set a breakpoint in malloc_error_break to debug
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: Adobe Photoshop CS4(651,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** error: can't allocate region
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** set a breakpoint in malloc_error_break to debug
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: Adobe Photoshop CS4(651,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** error: can't allocate region
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** set a breakpoint in malloc_error_break to debug
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: Adobe Photoshop CS4(651,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** error: can't allocate region
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** set a breakpoint in malloc_error_break to debug
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: Adobe Photoshop CS4(651,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** error: can't allocate region
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** set a breakpoint in malloc_error_break to debug
and this from Bridge ???
Apr 29 16:35:45 mugge Adobe Bridge CS4[650]: Adobe Bridge CS4(650,0xb0e8f000) malloc: *** error for object 0x29777980: double free\n*** set a breakpoint in malloc_error_break to debug
Apr 29 16:35:45 mugge Adobe Bridge CS4[650]: Adobe Bridge CS4(650,0xb0e8f000) malloc: *** error for object 0xcb73827b: Non-aligned pointer being freed\n*** set a breakpoint in malloc_error_break to debug
Apr 29 16:35:45 mugge Adobe Bridge CS4[650]: Adobe Bridge CS4(650,0xb0e8f000) malloc: *** error for object 0x29777980: Non-aligned pointer being freed (2)\n*** set a breakpoint in malloc_error_break to debug
Apr 29 16:35:45 mugge [0x0-0x31031].com.adobe.bridge3[650]: Adobe Bridge CS4(650,0xb0e8f000) malloc: *** error for object 0x29777980: double free
Apr 29 16:35:45 mugge [0x0-0x31031].com.adobe.bridge3[650]: *** set a breakpoint in malloc_error_break to debug
Apr 29 16:35:45 mugge [0x0-0x31031].com.adobe.bridge3[650]: Adobe Bridge CS4(650,0xb0e8f000) malloc: *** error for object 0xcb73827b: Non-aligned pointer being freed
Apr 29 16:35:45 mugge [0x0-0x31031].com.adobe.bridge3[650]: *** set a breakpoint in malloc_error_break to debug
Apr 29 16:35:45 mugge [0x0-0x31031].com.adobe.bridge3[650]: Adobe Bridge CS4(650,0xb0e8f000) malloc: *** error for object 0x29777980: Non-aligned pointer being freed (2)
Apr 29 16:35:45 mugge [0x0-0x31031].com.adobe.bridge3[650]: *** set a breakpoint in malloc_error_break to debug
Chris. also read my post just before this one plase. thx
Maybe you are looking for
-
Allowing a user to upgrade a specific Application
We have a specific application that we install on all of our mobile computers. Our newest is the Microsoft 8.1 Professional with an attached keyboard. The issues that we are facing have all been resolved with the exception of one. The application is
-
i recently reset my admin password, and promptly forgot it. now i need to reset. unfortunately when itry to reset with my apple id, it does not accept. i believe it is because i need to connect to internet by wifi, which i cannot turn on due to login
-
Can not copy 8GB file to ipod classic 120 GB
I am not able to copy 8GB file to ipod. I get error message "The disk in the destination drive is full. Insert a new disk to continue." But more than 75GB free space is available.
-
Request transport prd to development
Hi friends, I want to transport the request for production to developmet. Pbm is , I want to display the variants content in development from prd create a REQ from prd to transport the develoopment. Plz Help me. Thanks in advance.
-
Hi, My computer is only 5 feet away from my airport express, yet my connection is very weak (two bars at most). How can I determine whether the problem is with my card or with Airport? Cheers