Error handling in scenario.

Hi,,
I want to send an idoc to a partner with the (for example) BD10 transaction.
I also want to make sure all "required fields" are filled
So in my outbound user-exit I have this code:
if l_ze1marcm-zcomcode is INITIAL.
message e008(zmdm) with '(ZE1MARCM-ZCOMCODE)' .
endif.
The problem with this is that it displays the Message text on screen (BD10) and the program terminates.
I don't like it terminates but I don't want it to be send to my partner either.
I would like it to change idoc status (to error) and put my error-message-text into idoc status.
I should then be able to see this Idoc in BD87. Status RED. Not send.
Any Pointers ?
Br ,,
Martin

Hi,
You can handle exception using ALERTS. Configure your ALERTs with the help of
1. Creating alert category
2. Creating alert Rules for Alert category from Runtime workbench-->Alet Configuration
More in Details here:
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/content.htm
Also you can use Fault messages with ABAP Proxy to capture error.
http://help.sap.com/saphelp_nw04/helpdata/en/5d/a45c3cff8ca92be10000000a114084/content.htm
Regards
Vijaya
Message was edited by: vijaya kumari

Similar Messages

Error handling in File - XI - SOAP scenario without BPM

Hello!
We have a File -> XI -> SOAP scenario without BPM. The problem is that if the Web Service sends back an error XI tries to reprocess the same message again and again instead of taking the next one.
We do not want set the retry interval to NULL because most error cases are temporary connection problems and then also those messages would not automatically be reprocessed any more.
We also have to use BE instead of EO, otherwise the Web Service will not return a response. But we need the response to be sure that the processing was successful. The message volume in this scenario is quite high and we do not want to use BPM only for the error handling.
I know that from SP19 some additional adapter modules are available for async - sync scenarios without BPM. I tried to configure it like described in File - RFC - File without a BPM - Possible from SP 19. but it did not solve the problem. Does anybody have any other ideas? Thanks.
Regards, Tanja

Hi Tanja,
>>>The volume is 3000 messages/day on business days and 700 messages/day during weekends but the traffic will increase in the future
I think, you should check that out. It is assumedly only 2 days work to build a scenario:
IDoc -> BP
BP <-> SOAP/HTTP
BP -> IDoc (Acknowledgement)
In the process you need a condition branch, where you decide success or not. You need 2 Interface Mappings for filling the ALEAUD.
Just send 1000 IDocs to the Test-XI and look to performance monitoring at Runtime Workbench, to find out, how many message will be processed in one hour. Assumedly 3000 and more per day should be possible. The advantage would be to reduce number of systems (no file system) and messages (better monitoring) and using the standard (better maintenance).
>>>So you are suggesting I should use HTTP adapter and then add the SOAP header manually in a mapping?
Yes, build the SOAP envelop during the mapping. Most easy is to use XSL or, if your mapping is ready, an additionsal XSL. You can put the error into the Acknowledgement to see it in ERP transaction WE02.
Filling of ALEAUD fields:
E1ADHDR/MESTYP: original message type
E1ADHDR/E1STATE/DOCNUM: original IDoc number
E1ADHDR/E1STATE/STATUS: 68 in case of error, 53 in case of success
E1ADHDR/E1STATE/STATXT: Short description for R/3 user what has happend
I ve done such a scenario several times. That works without any problems.
Regards,
Udo

IDOC to SOAP asynchronous scenario Error handling

Need an expert!!!!!!!!! advise on error handling for IDOC--PI--
SOAP scenario.This is a asynchronous scenario where PI is calling a Legacy system using SOAP adapter.My question is how i can do error handling in this scenario.If i get an alert in pi with payload variable that would be fine, do i need to use BPM and if that is tthe case what will be steps.
Appreciate your help.
Manish

Hello Manish,
My question is how i can do error handling in this scenario.
Use the standard alert framework. Search on SDN / SAP Help for details.
do i need to use BPM and if that is tthe case what will be steps.
BPM is not required to raise alerts, as this is an async call.
Regards,
Neetesh

Error Handling on RFC - XI - File Scenario

I have an R/3 RFC -> XI -> FILE scenario that works, but does not adequately handle the error of my R/3 to XI connection being down.
The RFC call is async since I was under the impression that I had to do a "to file" scenario that way.
 CALL FUNCTION 'ZXO_SAP2RFC'
 IN BACKGROUND TASK
 DESTINATION wa-rfc_dest_1
 EXPORTING
 request = request
 rfc_header = rfc_header.
 COMMIT WORK AND WAIT.
 IF sy-subrc <> 0.
 [error handling]
If my rfc destination is down (for example when XI is down), this RFC call is still getting a sy-subrc of '0' (so my error handling does not kick in).
Any suggestions?

Hi Keith,
your scenario is working correctly. If XI is down you will find your message queued in transaction SM58, where you can restart it manually. Usually there should be standard job for report RSARFCEX, which is periodicly trieing to restard the message.
Asynchr Call (tRFC) means that your program continues completly undependent from that call.
Make a test: Change temporary the called machine in SM59 destination to senseless value and execute your programm. Your message should be in SM58. Then correct the destination and wait a few minutes...
Regards,
Udo

Error Handling in File to Multiple IDOC Scenario?

Hello Experts,
My scenario is file with Multiple records and I want to send it to SAP system.If there will be 10 Records in my file I need to create 10 IDOC in Target system.
I can use below of the two options.
1) File to Multiple Idoc (1.N Mapping)
2) Using BPM
3)Directly place the file in SAP application server and process it via ABAP Program.
However I am not clear in which option error handling will be more effective.Please suggest.
Basically I want to handle If out of 10 records 9 are correct and 1 record is not correct then I should be able to report within PI without affecting 9 correct records.Is it possible 9 records will be sent to SAP system and PI will only show error for 1 incorrect record.
Also I will be doing this scenrio for transaction data with huge size (1 Million Records).Which approach will be more effective in this case.
Thanks,
Pushkar

Hi Patel,
I want to handle If out of 10 records 9 are correct and 1 record is not correct then I should be able to report within PI without affecting 9 correct records.Is it possible 9 records will be sent to SAP system and PI will only show error for 1 incorrect record.
when working on graphical mapping, the target structure is created when there are no errors in all records of source structure.
suppose if we have validation error in 9th and 10th record, then we can not process the first eight records and inturn we can not store the two error records in XI for further.
i suggest you the third option, you can directly place the file in SAP application server and process it via ABAP Program.
this is far better because you can do more customizations as you have to deal with millions of records.
Regards,
Pradeep A.

How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?

Dear all
How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?
Thanks
Regards
karan

Hello
These are the following errors
1. Trace level="1" type="T">no interface action for sender or receiver found</Trace>
2. <Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!
3.
<Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</
Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>Trace level="3" type="T">Error of the prevous version:</TraceTrace level="3" type="T">Error ID APPLICATION_ERROR</Trace>
tThere are repeating errors also.
TThanks
Regards
kkaran

XI Contents : Error Handling : Syncronous Proxy - WebService Scenario

Hi,
I am working on Syncronous : Proxy <-> XI <-> WebService Scenario.
I am using Standard XI Contents from XI and SAP side.
Meaning : All the design objects like Message Interface / Message Types / Data Types etc are NOT created by me, but I am using from Standard XI Contents EA-HR 600. I did all the Configuration of the Scenario by using these Design objects.
In short , I can not change any of the Design object as it belongs to SAP.
Now, the scenario works fine. But I need to cater for Error handling.
Any suggestion.
I can not create fault messages as it is SAP's objects.
Thanks.
Dk

Thanks for suggestions.
Now my comment on these suggestions:
Option1 by Bhavesh. Copy Contents to my namespsce : I can do that, but here I need to tell you something. I have used Contents (Design Objects) and I didnt have to even create or activate any proxy ( I was amzed to see that ). Now, coping all the contents to my namespace will give me flexibility to add Fault Message (which is currently not avilable in standard content). but..but..I will have to create and generate / activate the proxy. ( Am I right?). Then where should I use this proxy? How my application will talk to this proxy? (I am not sure if I made my point clear). Currently I dont have to worry about communication between this HR application with standard Proxy ( which belongs to standard contents).
Option2 by Jai. Webservice changes : Webservice is not developed by me. I am consuming it. but I can ask this vendor who is WebService owner to change his webservice to suit my needs. But it wont solve the problem as I do not have Fault message at XI side.
I can consider Option1 by Bhavesh, if the proxy problem is solved.
Thanks,
DK

BPM for error handling and acknowledgements

Hi,
Can any one tell me how to handle BPM for error handling and acknowledgements in one scenario.
Please send me the link if you have other wise give me the solution on the same.
Thanks,
Nagesh

Hi !
Just check out these links This might help you.
Usually Application Level Acknowledgement is considered during Sync communication. If you are using RFC, you can make use of Sync communication. So you can handle it without bpm, provided your both sender and receiver are sync interfaces.
To know about Ack-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
you can not dirrectly access the content of the ACK, however the BPM shows different behaviours based on the ACK status. E.g. if the ACK contains a success message the BPM will continue in its normal process, if the ACK contains a permanent error, it will either stop or go through an exception branch (provided such a branch has been defined). Have a look at the documentation: http://help.sap.com/saphelp_nw04/helpdata/en/43/65ce41ae343e2be10000000a1553f6/content.htm It doesnt"t state the above mentioned behaviour in detail but says that you need to define an exception branch.
The trickiest part is always to find out, when you will get a transient vs. as permanent error ack. If you are using ACKs with Proxies refer also to this link http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm and this http://help.sap.com/saphelp_nw04/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/7b/94553b4d53273de10000000a114084/content.htm
The following link has entire configuration of Receiver XI Adapter (including acknowledgements)
http://help.sap.com/saphelp_nw04/helpdata/en/f4/0a1640a991c742e10000000a1550b0/content.htm
 eror handling in BPM.

1. CCMS monitoring
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/42fb24ff-0a01-0010-d48d-ed27a70205a8
2. BPM Monitoring
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
3. Monitoring XML Messages http://help.sap.com/saphelp_nw04/helpdata/en/41/b715045ffc11d5b3ea0050da403d6a/frameset.htm
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
monitoring BPm https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
Reconciliation of Messages in BPM - /people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
Also see the below BPM related links
check list for BPM https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
And some weblogs
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
Thanks !!!
Regards
Abhishek Agrahari
Questions are welcome here!!
Also mark helpful answers by rewarding points

JSF error handling when the bean is not correctly loaded

Hi,
I am doing some error handling in JSF and I want to do it in an elegant way. I have the following scenario for error handling.
When the bean is initialized I load the bean with values from DAO which give SQL Exceptions.
Since the bean is not loaded I properly I have to send the user to an error page showing the error message why I am sending the user to this page.
I can do it by [ FacesContext.getCurrentInstance.redirect("/error.jsf") ] doing so I will loose all the FacesMessages that are added by the exceptions.
Instead I want to use the [ FacesContext.getCurrentInstance.dispatch("url") ] which will allow the transfer of the user but I get the following
16:59:39,341 WARN [lifecycle] executePhase(RESTORE_VIEW 1,com.sun.faces.context.FacesContextImpl@8537f9) threw exception
java.lang.ClassCastException: javax.faces.component.UIViewRoot
and the method that I am calling is
public static void programErrorEnd() {
logger.info("in the prgmErrorEnd mehod");
//intializing the contex object
FacesContext ctx = FacesContext.getCurrentInstance();
try {
//ready to dispatch the url.
//ctx.getExternalContext().redirect("app/error/prgmerror.jsf");
ctx.getExternalContext().dispatch("error/prgmerror.jsf");
} catch (IOException e) {
//TODO what to do when there is an error at this stage.
finally {
ctx.responseComplete();
}Thanks and Regarding
Edited by: sgatl2 on Aug 28, 2008 2:32 PM
Edited by: sgatl2 on Aug 28, 2008 2:45 PM

Just let it throw the exception and define an error-page entry in the web.xml which catches the specified exception (or a superclass of it or a HTTP status code) and displays the error.jsf page accordingly.

Error Handling

hi,
I have an IDOC -> XI ->SOAP scenario.
How do we handle error handling in the below scenarios i described:
1. If i have an error in transmitting the xml to the receiver SOAP. How can i send an error email notification?
2. A retry or resend has to occur for 8 hours i.e., we keep trying for 8 hours and if it fails then we need to notify through email. How can we do this?
3. At the first failure transmission an email has to be notified and failure after 8 hours another email notification has to be sent so 2 emails will be sent for a failure transmission? Is this possible through XI?
How can we achieve the above?
Thanks,
Tirumal

Hi Tirumal,
Configure 2 alerts.
One to be triggered when there is the error in tramsmitting the SOAP XML.
Next to be triggered after the retry for 8 hours. If you are using the BPM with wait, then you can associate the Alert with the Exception block of your BPM and trigger the same.
Also, from SP14, Alerts can be triggered for errros in both integratioon engine and adapter engine.
To create alerts , this blog can help you out,
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
From SP14 onwards, activation of end to end monitoring is not needed for Alerting. Refer to this note 870232 for this info.
If you are on Sp14, implement the note 913858.
If you are below SP14, then also check this blog,
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
Regards,
Bhavesh

How to activate Forward Error Handling in SRM

Hello Gurus,
I got an requirement to activate Forward Error Handling in SRM. I have searched on SDN but didn't find appropriate answer on it.
Even I found some link: PI/XI: Forward Error Handling (FEH) for asynchronous proxy calls with the use of Error and Conflict Handler (ECH)
It explains me some points like activating FEH from SRM in SPRO. I have activated the same, plz check the screen shot:
It also follows some development for the same.
Here my concern is, should I follow this document? Does it applicable to all to all the scenarios?
Step 8: it assign object id and type what does it mean...
Does any one can explain me in detail..... Please provide me any document to configure the FEH in SRM.
I am trying to implement FEH in my SRM system. So that when even XML fails due to error, I should be able to reprocess/restart it with some editing to the XML.
My receiver interface for XML is PurchaseRequestERPSourcingRequest_In
I think this is standard one and no need to make any custom code for it. SAP has all ready given solution for it with some Configuration.
I have made some configurations like:
The view FEHV_ACTIVE must have the status active.
In transaction /SAPPO/LOGSYS , the logical system must be defined for the software component SRM-EBP-ESA .
As stated in in the link :
http://esworkplace.sap.com/socoview%28bD1lbiZjPTAwMSZkPW1pbg==%29/render.asp?id=2BAABCB0D30111DC2B8D000F20FCB6A9&fragID=…
Also I have made some configuration according to the Note: 1973768 - No reprocess option is available in FEH for failed in XML in SRM
Resulted, the “Process” button get activated in the XML Post Processing screen.
But can I reprocess my XML with edited value from there..?
All the configuration part of PI is already done .
I wanted to know about the FEH Part. what are the steps i am missing or where i am going wrong ?
Please let me help.
Thanks
Regards
Karan

Dear Raz,
I have gone with above mentioned note, it explains about creating Custom Proxy and configuration with PI scenario. Even the link in my previous post, explains about the custom proxies and configuration..
I think I should must be descriptive about my issue.
I am trying to implement FEH in my SRM system. So that when even XML fails due to error, I should be able to reprocess/restart it with some editing to the XML.
My receiver interface for XML is PurchaseRequestERPSourcingRequest_In
I think this is standard one and no need to make any custom code for it. SAP has all ready given solution for it with some Configuration.
I have made some configurations like:
The view FEHV_ACTIVE must have the status active.
In transaction /SAPPO/LOGSYS , the logical system must be defined for the software component SRM-EBP-ESA .
As stated in in the link :
http://esworkplace.sap.com/socoview%28bD1lbiZjPTAwMSZkPW1pbg==%29/render.asp?id=2BAABCB0D30111DC2B8D000F20FCB6A9&fragID=…
Also I have made some configuration according to the Note: 1973768 - No reprocess option is available in FEH for failed in XML in SRM
Resulted, the “Process” button get activated in the XML Post Processing screen.
But can I reprocess my XML with edited value from there..?
Can any one tell me, what are the steps I am missing here. As this is my first time to implement FEH, I am confused.
Please let me help.
Regards,
Chandan

Transaction and Error handling in Mediator 11g

Hi Experts/Gurus/All,
We have following scenario in Mediators :-
For Inbound Interfaces :-
M1-->M2-->M3
M1 calls M2 and M2 calls M3
There are 3 mediators, Mediator#1(M1),Mediator#2(M2) and Mediator#3(M3)
M1 performs a FIle Read and do a ABO-->OAGIS conversion
M2 performs routing
M3 performs a OAGIS -->ABO(JDE E1) conversion.
Now,we are in middle to decide the Fault Handling Mechanism for this case.
M1 is Asynchronous , M2 is Synchronous and M3 is also Synchronous.
Question is :
1. M1 will start a new Transaction,Do M1 will propogate the same transaction to M2 which,as being Synch,propogates the same transaction to M3 ?
2. How will the commit and Roll back will be taken care of?
3. What if M1 errors out?
4. Whatif M2 errors out?
5. What if M3 errors out?
In question 3,4 and 5:
What will happen will the Full Transaction ? If M3 erros out,would the Entire Transaction Propogated by M1 will be roll back?
Also ,How about Error handling in this case:
Do I need to create seperate fault-policy.xml and fault-binding.xml for M1,M2 and M3 ?
Another Scenario is of OUTBOUND interfaces :-
M1-->M2-->M3
M1 calls M2 and M2 calls M3
However , M1,M2 and M3 are all Asynchronous.
In this scenarios how would I handle following :-
1. If M2 Errors out,I need the entire Interface which comprises of M1-->M2-->M3 to roll back?
2. If M3 Errors out,I need the entire Interface which comprises of M1-->M2-->M3 to roll back?
3. Seperate Transactions means I have to create seperate fault-policy.xml and fault-mapping.xml to handle errors?

Hi,
You could create a package, and use the OdiSqlUnload to export the data into a flat file (csv) from snp_check_tab, then amend it. Then create an interface to load the data from the flat file to your tables, either via external tables or SQL Loader.
Question is, why are you amending data going from source to target? there surely has to be something wrong with the Architecture (especially if you are getting errors in production). If you amend data, so that it is different in source as it is in target, then when it comes to regression testing, this will never match.
The errors should go be fixed at source, and either you, or the business should have access to do so.
Cheers
Bos

Error Handling in Mediation for sequential Invocation in Routing rules

Hi all,
I have a situation File Adapter->Mediator->BPEL Process 1->BPEL Process 2.When an error occurs in BPEL Process 1 a soap fault is returned to the mediator service.
Now since the mediator service invokes BPEL process 1 synchronously hence the fault policy is by-passed and the error is returned to the file adapter(the caller).
I have configured rejection handling in the fault-policy file as below -
_+<faultName xmlns:rjm="http://schemas.oracle.com/sca/rejectedmessages" name="rjm:pollFlatFiles">+_
_+<condition>+_
_+<action ref="ora-ws"/>+_
_+</condition>+_
_+</faultName>+_
_+<service faultPolicy="RejectionMessageHandlerPolicy">+_
_+<name>pollFlatFiles</name>+_
_+</service>+_
The following scenario occurs when trying to test the error handling -
1.First when the error occurs in BPEL processes 'oracle.fabric.common.BusinessFaultException' is thrown at the composite level and no message is rejected by the file adapter.
2.Immediately when the errors occurs for a second time the messages gets rejected and my rejection handler is called since the following exception is thrown from the file adapter -
The adapter has exceeded maximum configured retries. The adapter was unable to process "{0}" after having retried for {1} times, now the adapter will reject the message. This exception usually comes due to errors in downstream systems. Please increase the value for "jca.retry.maxRetries" in composite.xml for the inbound service and redeploy.
I have tried increasing the retry count also in composite.xml but the same sequence occurs i.e-
First time business exception.
Next time message rejection.
Any idea how the error can be properly handled in synchronous invocation to avoid this situation so that the messages always get rejected?
I am using SOA Suite 11.1.1.2.0 version.
Thanks and Regards,
Mandrita.

Hi samay,
In the transfer rules, if returncode is not 0, the upload stop,so..
Actually I delete the "wrong" data in the start routine of the transfer rules

Error handling in XI

Hi All,
I am implementing several scenarios in XI. They are mainly dealing with RFC, JDBC adapter, file.
The main communication is between SAP R/3 and Oracle via XI, both to and fro.
Pls tell me what are the standard error handling mechanisms in XI.
The main focus areas are as follows:
1. If the sender XML format in XI has error, how to inform the sender system.
2. If receiver Oracle system finds some error in the received msg, how to inform the sender system.
This is urgent, pls help asap.
Regards
Neetu

Hi Neetu,
You can use Alerts for the same..... Please go through the information below to know more...
For alerts take a look at this blog,
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
For CCMS monitoring, this document,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/42fb24ff-0a01-0010-d48d-ed27a70205a8
From SP14 onwards, activation of end to end monitoring is not needed for Alerting. Refer to this note 870232 for this info.
If you are blow SP14, then also check this blog,
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
To send an EMAIL, assign an EMAIL ID to the corresponding user in the transaction SU01 and then set up SCOT and you can send emails when the ALERT is triggered.
Once you have configure Alerts, you will get the Alerts into ALERT INBOX in RWB of the user. To also get the email, the following needs to be done,
1. In SU01 -- Assign the Email ID for the Recipient of the ALERT.
2. In , RWB>ALERT INBOX> PERSONALIZATION--> Time Independent Delivery and Email are selected.
3. Finally, SCOT needs to be set up to send Emails. Check this for the same. You can ask your BASIS team to do this step.
http://help.sap.com/saphelp_nw04/helpdata/en/23/1edf098ea211d2b47300609419ed29/frameset.htm
Also, to test your Alerts, execute the report RSALERTTEST in SE38.
Regards,
Abhy

Error Handling in JDBC Adaptor - Without BPM

Hi friends,
My problem is like this. Scenario is File -> Xi -> JDBC.
here i didn't used BPM at all.
My interface is working fine.
right now i am not doing any error handling for 'Primary key violation, refrential intigrity etc.. '.
if this type errors encountered i going to adapter monitoring and looking out the issue.
Now the client requirment is
whenever this type of errors occured Client should be notified Via email along with error description.
Is there anyway to do this ?

Hi Suresh,
You can setup the Alerting framework of XI to trigger alerts. Alert rules can be set to raise alerts in case of JDBC Adapter Errors.
Check these links....
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Thanks & Regards,
Renjith
An addition to what i just said...You have to be on SP14 for this...
Message was edited by: Renjith Andrews

Error handling in scenario.

Similar Messages

Maybe you are looking for