Error handling limitations in XI3.0 SP11 when using IDOC's

Backround: Sending IDOC's from XI to a 6.20 SAP system with ALEAUD turned on.
We have found a couple of limitations with XI 3.0 SP11 regarding error handling and are wondering what other XI Developers are doing to work around them:
1) Unable to generate Alerts from global Alert Rules (PMI) in a BPM
2) Unable to handle IDOC negative acknowledgments in a BPM
3) Unable to generate Alerts from Alert Rules (PMI) for negative IDOC acks when NOT using a BPM
So far we are designing around these issues by using deadline monitoring steps in BPM's to handle IDOC posting errors and raising an Alert (the beauty of this workaround is that the BPM will automatically continue when the IDOC data is corrected and posted), and for non-BPM interfaces the errors must be handled in the receiving SAP system.
We have sent these issues in to OSS but the replies have come back stating that it is 'by design'.
Thx,
Jason.

Did you get any better solution now?
Regards
Mike

Similar Messages

  • Error in Agilent 2k3k4k X-Series drivers when using examples that contains "read waveforms.​vi"

    Hi, all
    Something goes wrong when using agilent 2k3k4k drivers. Could anyone help me?
    Agilent DSO-X 2012A oscilloscope
    Drivers are download from:
    http://sine.ni.com/apps/utf8/niid_web_display.down​load_page?p_id_guid=9E84674573AF6AB8E0440021287E6A​...
    Each time when running examples:
    Agilent 2000 3000 X-Series Acquire Waveform.vi
    Agilent 2000 3000 X-Series Acquire Waveform continuously.vi
    Agilent 2000 3000 X-Series Acquire Multiple Waveform.vi
    Errors rise and the oscilloscope is crashed and needed to be shut down and restarted. It seems that the example can't pass the "Read Waveforms.vi" in the Block Diagram. The PrintScreen   is as follows:

    sagha wrote:
    According to the MAX they are correct (IVI driver for the Agilent 33519B downloaded from the NI website). When I run the IVI Initialize block any frequency, amplitude, offset, etc. settings on the function generator are reset to the default values. So, something is being sent to the instrument.
    However, I've also tried adding the General Error Handler block right after the Initializaiton block to cancel the -1073807339 error. Then, I add the IviFgen Configure Standard Waveform [STD] block to set the function generator frequency. The program throws an error that looks like a resource problem:
    "Error -1074130544 occurred at IviFgen IVI Error Converter.vi
    Possible reason(s):
    The session handle is not valid.
    Complete call chain:
        IviFgen IVI Error Converter.vi
        IviFgen Configure Standard Waveform [STD].vi
        <myViName.vi>
    What could be the reason for an invalid session handle? I've followed the NI tutorials on setting up IVI instruments in MAX and in LabVIEW.
    Okay, this is new information.  Nothing in your previous posts mention that the initialztion did anything at all besides return the timeout error.  The invalid session handle is because you closed the session.
    I'm having trouble following your descriptions.
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • Missing part check functionaliy at the time of GR when using IDOCS

    Hi All,
    We are using IDOCs to record the the Good Receipt for the Purchase Orders.
    Then a BAPI is called to post the GR.
    There is a functionality for missing parts checks which can be activated at the time of GR which checks the ATP & sends mail to MRP controller.
    When we directly use the MIGO, then missing part check is activated & a mail is sent to MRP controller.
    If we use the IDOC to post the GR, the missing part check is not activated & mhence mail is not sent to MRP controller.
    Pl let us know if there is a way by which we can activate the missing part check in GR using IDOCS.
    Regards
    Vineet

    Hi,
    The G/L accounts which you give in the PO will be Debited & your vendor A/c will be crdtd at the time of LIV.
    Thanks & Regards,

  • Regarding Error handling in Mass Upload of Organizational Structures Using RHALTD00

    Hi all,
    I am using standard program RHALTD00 for mass uploading of Organizational objects into SAP system. But incase if our input file has any error records, how can we track such errors? Can you please share your inputs.
    Thanks,
    Cs

    Hi Sirisha,
    Report RHALTD00 imports the records from the file and creates a batch input
    session, which you can process either directly or using batch input
    processing:
    Batch input processing: When ever you will run the report in this way, error records handled in a session.
    Direct processing:
    Requirements to run this report is :-
    The dataset must contain all of the records of infotype 1000. Only then can
    other information be imported in any order that is required.
    The dataset must not contain records with workflow infotypes (infotype
    numbers from 1200 to 1299). Such records are not included in processing.
    Thanks,
    Sreeram

  • Error 10401 occurred at AI Hardware Config, when using AI Acquire Waveform vi

    I can successfully run applications that use the AI Sample Channel vi, however when I use the AI Acquire Waveform vi the following errors are generated:-
    Error -10401 occurred at AI Hardware Config, followed by
    Error -10401 occurred at AI SingleScan.
    All applications have been developed using Labview 6.0.2, on an NT machine.  The applications are then run (or atleast attempted to be run) using the Labview Run-Time Engine on a different NT machine.
    The driver software I am using is the NI-DAQ Native Data Acquisition Driver Software Version 6.1.

    Hi,
    I've found a Knowledge Base on the NI website describing some situations where this problem occurs:
    http://digital.ni.com/public.nsf/websearch/46F78EDD19BA0CC386256CEE007201FC?OpenDocument
    That error code is generally seen when something has changed in the DAQ card's configuration, or the drivers are not installed properly. It's strange that this is showing up only on certain functions for your application.
    Also try having a look through the DAQ troubleshooting pages on the website:
    http://www.ni.com/support/daq/
    Regards,
    Mark Lee
    National Instruments

  • Error occuring in SELECT statement FOR UPDATE when using WITH cluase

    Hi,
    Iam using oracle 11g version
    Iam having a query with fetch records for update insid with cluase as
    cursor c1 is
    With abc as (
    SELECT col1,col2 from table1, table2 where < condition>
    for update of <col1> skip locked
    select * from abc,table3 where <condition>
    union all
    select * from table4 where id not in (select * from abc)
    if i add "for update of <col1> skip locked" this cluase
    iam getting error ORA-00907: missing right parenthesis
    when i remove "for update of <col1> skip locked" the block is working fine..
    can i know why error is occuring i

    Hi, first of all, your placing of "for update" clause is wrong. It should be at the end like:
    With abc as (
    SELECT col1,col2 from table1, table2 where < condition>
    select * from abc,table3 where <condition>
    union all
    select * from table4 where id not in (select * from abc)
    for update of <col1> skip locked;Second, if you try to compile it with this syntax then you will get a new error.
    ORA-01786:     FOR UPDATE of this query expression is not allowed
    Cause:     An attempt was made to use a FOR UPDATE clause on the result of a set expression involving GROUP BY, DISTINCT, UNION, INTERSECT, or MINUS.
    Action:     Check the syntax, remove the FOR UPDATE clause, and retry the statement.So, you will not be successful with the union clause in your query.

  • Error: PL/SQL ORA-00932 inconsistent datatype when using LONG value

    Good morning:
    I am using a work PL/SQL script where I am using a LONG value in a cursor. When I execute it, I am receiving:
    PL/SQL ORA-00932 inconsistent datatype:  expected NUMBER got LONG
    set serveroutput ON SIZE 1000000
    set heading off               
    set feedback off               
    set trimspool off              
    set echo off
    set term off                  
    set pagesize 0        
    SPOOL &so_outfile;
    DECLARE
      v_data_file          varchar2(30);
    --   v_sch_code            varchar2(10);
    --   v_instance_name       varchar2(10);
        ws_path            payroll.pybutfl.pybutfl_utl_file_path%TYPE;
        v_data_line           VARCHAR2 (2000)                              := NULL;
        fhandle_o             UTL_FILE.file_type;
        v_line_count          NUMBER                                       := 0;
        v_selected_count      NUMBER                                       := 0;
        v_error_count         NUMBER                                       := 0;
        v_written_count       NUMBER                                       := 0;
        v_error_text          VARCHAR2 (50)       := ' AMACONF_ERR: Unable to write the line. ';
        v_errm                VARCHAR2 (255);
        v_sqlerrm             VARCHAR2 (255);
        v_payment_type        VARCHAR2(10);
    CURSOR C1 IS
    select RTRIM
            AMRCONF_PIDM_ERR            ||'|'||
            AMRCONF_IDEN_CODE_ERR       ||'|'||
            AMRCONF_ENTRY_DATE_ERR      ||'|'||
            AMRCONF_CONFID_IND_ERR      ||'|'||
           *AMRCONF_COMMENT_ERR        ||'|'||*
            AMRSUBJ_SUBJ_CODE_ERR       ||'|'||
            ERROR_CODE                  ||'|'||
            ERROR_CODE_TEXT                 ) data_line
            from WSUALUMNI.AMRCONF_ERR;
    BEGIN
    DBMS_OUTPUT.put_line ('Program Generating AMACOMT Mass Update Error File ');
    IF UTL_FILE.is_open (fhandle_o)
        THEN  
       UTL_FILE.fclose (fhandle_o);
    END IF;
    /* Name The File Here */
    v_data_file := ('Amaconf_error.txt');
    SELECT RTRIM (pybutfl_utl_file_path)
          INTO ws_path
          FROM payroll.pybutfl;
          fhandle_o := UTL_FILE.fopen (ws_path, v_data_file, 'w');
          DBMS_OUTPUT.put_line ('UTLFILE file for this run is: ' || ws_path||'/'||v_data_file);
          v_written_count := 0;  
    FOR c1_rec IN C1 LOOP
          BEGIN
            v_selected_count := v_selected_count + 1;
            v_data_line := rtrim(c1_rec.data_line);
            UTL_FILE.put_line (fhandle_o, v_data_line);
            v_written_count := v_written_count + 1;
        EXCEPTION
         WHEN OTHERS
          THEN
           DBMS_OUTPUT.put_line (v_error_text);
           v_error_count := v_error_count + 1;
        END;
    END LOOP;
         DBMS_OUTPUT.put_line ('Number of Records Selected: ' || v_selected_count);
         DBMS_OUTPUT.put_line ('Number of Records Written: ' || v_written_count);
          IF UTL_FILE.is_open (fhandle_o)
          THEN
             UTL_FILE.fclose (fhandle_o);
          END IF;
    END;
    SPOOL OFF;If I comment out the "AMRCONF_COMMENT_ERR ||'|'||" line, then the script works fine. The table was created as:
    Create Table WSUALUMNI.AMRCONF_ERR
        AMRCONF_PIDM_ERR             NUMBER (8)    NOT NULL,
        AMRCONF_IDEN_CODE_ERR        VARCHAR2(5)   NOT NULL,
        AMRCONF_ENTRY_DATE_ERR       DATE          NOT NULL,
        AMRCONF_CONFID_IND_ERR       VARCHAR2(1),
        AMRCONF_COMMENT_ERR          LONG,         
        AMRSUBJ_SUBJ_CODE_ERR        VARCHAR2(5)   NOT NULL,
        ERROR_CODE                   VARCHAR2(12)  NOT NULL,
        ERROR_CODE_TEXT              VARCHAR2(50)  NOT NULL
    ); I don't get what is the problem here in the script.

    Hi,
    Feew suggestions
    1) LONG is a deprecated type hence if possible start working on changing that column
    2) CLOB will your preferred datatype over LONG.
    3) you cannot use RTRIM on long.
    here is a very quick example
    drop table h
    create table h (x long,y varchar2(100))
    select rtrim(x) from h
    select rtrim(y) from hSolution:
    [http://www.oracle.com/technology/oramag/code/tips2003/052503.html]
    need a better solution change the datatype to clob and
    drop table h
    create table h (x clob,y varchar2(100))
    select  dbms_lob.substr( x, 4000, 1 ) from h
    select rtrim(y) from hCheers!!!
    Bhushan

  • Runtime Error! R6025-pure virtual function call when using Project Manager

    Hi
    I am trying to consolidate a project.  I have plenty of destination HD space, 16gb RAM and am wearing the correct color socks today.
    However, when I go to run media manager, I get a run time error R6025 - pure virtual function call.
    I've tried the same project on two different machines and get the same result.
    Has anyone come across this, and is there a fix?
    Many Thanks
    ADAM READ
    Intermedia

    Thanks for the reply John, but it's a codey, windows error thing.  It's happening on 2 different machines, each with the same install of Premiere Pro, so I'm liable to think it's a PP issue.  The MS website info on the error is very vague and certainly out of my skill set.
    Perhaps I'll try the famous import into another project option.
    Any other advice appreciated.
    ADAM

  • File error for improperly inserted or defective desk when using Word with text boxes PLEASE HELP!

    When I have a Word document opened that contains around 10 text boxes, I get..."A file error has occurred. Check your network connections or make sure the disk is properly inserted and not defective" causing the program to either quit automatically or freeze and require me to manually shut my computer down. This will occur about every 15 minutes and only when I am on a document with numerous text boxes. Also, I do copy and paste the text boxes from file to file and change the text accordingly.
    Operating System - Mac OSX 10.8.5
    Microsoft Word 2011 - Version 14.4.5
    File sizes - around 190 KB
    I have turned off track changes and smart cut and paste options, checked for duplicate fonts (none), verified both the Macintosh HD and Apple HDD Media disks (both said the disks were fine so I did not repair either). My husband mentioned something about allocating the working memory space of Word but not sure how that is done (and he is on Team PC ). PLEASE HELP!!!

    CPie wrote:
    o..k.
    I see that you have run out of helpfulness for this session, What the ....? I just told you to add your jtextfield to a jpanel or some other visible component to be seen.
    it is getting late here I will take my business elsewhere tomorrow rather than waiting up for a response which shows you realllly need to find something better to do! And thanks for the help earlier. That was actually useful whereas this wasn't, I'm sure you knew that already,You know that we are all volunteers here. Any time spent here helping you is time away from our friends and families. A little more appreciation is definitely in order or go somewhere else and pay for your help.

  • Error  ' unable to interpret "*601" as number ' when using  CONVERT_OTF

    Hi All ,
    I am converting a Smartform to PDF in 4.7 version and I am getting an error like "  unable to interpret "*601" as number ' in Convert_otf function module here the importing parameter BIN_FILESIZE is getting *601 value in back ground of FM . Can any one help me in solving this error . Did i miss any parameter's .
    Thanks and Regards
    Syed Akbar .

    Hi.
    The asterisk can appear when field length inconsistency takes place at value assignment between two variables.
    Example:
    DATA:
      p_amount TYPE c length 15,
      l_amount TYPE p DECIMALS 2.
    WRITE: l_amount CURRENCY l_waers TO p_amount.
    If value of L_AMOUNT equal '103276149119,40-', then value of P_AMOUNT will be equal '*3276149119,40-' (asterisk appears).
    Best regards,
    George Shlyahov.

  • Any limited access of international sim when using ipad cellular?

    if i purchased an Ipad in Singapore, is it usual to use Vietnam nano sim without any limitation? Do i have any other actions for setting up? (as I've seen in the website ipad wifi + cellular in Sing selling with contract with Star hub, singtel..etc?

    Yes I know. I work for an Investment Bank and luckily I had my iPhone to hand. The bank is/was considering the iPAD as an option for travellers but Apple need this to be sorted first. In the meantime simply remove the batteries from the keyboard when travelling. Other than this problem it's fantastic. I got loads done on the plane and happy to report I got 9hours of typing, music and video out of it during a flight from Heathrow to Vancouver and it was still showing 20% power left !!!! Brilliant !!!! Oh ... and Airport security didn't ask me to take it out of my briefcase like they do with my laptop.

  • Error in transaction COGI does not appear when using FM BAPI_PROCORDCONF_CR

    Hi,
    I use FM BAPI_PROCORDCONF_CREATE_HDR to confirm the order but the error for goods movement does not appear in COGI but it does appear during manual confirmation in transaction COR6... can anyone help me with this? Thanks a lot!
    Rgds,
    Mark

    Hi,
    maybe QE11 is an option for recording results vai BIM.
    Cheers,
    S>

  • Getting Error in Windows 8.1 XAML code when using Microsoft.PlayerFramework

    Error Is:
    The specified value cannot be assigned to the collection. the following type was expected UIelement
    xmlns:player="using:Microsoft.PlayerFramework"
    <Border x:Name="Border" DataContext="{TemplateBinding ViewModel}">
    <Border.Resources>
    <player:BoolToVisibilityConverter x:Key="VisibleIfConverter" />
    </Border.Resources>
    <Grid>
    <Grid.RowDefinitions>
    <RowDefinition Height="*"/>
    <RowDefinition Height="Auto"/>
    </Grid.RowDefinitions>
    <StackPanel Orientation="Horizontal" VerticalAlignment="Bottom" HorizontalAlignment="Center">
    <StackPanel Orientation="Horizontal" x:Name="NonEssentialsNearLeft">
    <player:SkipPreviousButtonBehavior x:Name="SkipPreviousButton" ViewModel="{TemplateBinding ViewModel}" Visibility="{Binding IsSkipPreviousButtonVisible, RelativeSource={RelativeSource TemplatedParent}, Converter={StaticResource VisibleIfConverter}}" Size="70" FontSize="40" Margin="10,0,10,0" StrokeThickness="0" Background="{StaticResource ItemBackgroundThemeBrush}"/>
    <player:RewindButton x:Name="RewindButton" ViewModel="{TemplateBinding ViewModel}" Visibility="{Binding IsRewindButtonVisible, RelativeSource={RelativeSource TemplatedParent}, Converter={StaticResource VisibleIfConverter}}" Size="70" FontSize="40" Margin="10,0,10,0" StrokeThickness="0" Background="{StaticResource ItemBackgroundThemeBrush}"/>
    <player:SkipBackButton x:Name="SkipBackButton" ViewModel="{TemplateBinding ViewModel}" Visibility="Collapsed" Size="70" FontSize="40" Margin="10,0,10,0" Padding="0,-10,0,0" StrokeThickness="0" Background="{StaticResource ItemBackgroundThemeBrush}"/>
    </StackPanel>
    <player:PlayPauseButton x:Name="PlayPauseButton" ViewModel="{TemplateBinding ViewModel}" Visibility="{Binding IsPlayPauseButtonVisible, RelativeSource={RelativeSource TemplatedParent}, Converter={StaticResource VisibleIfConverter}}" Size="140" FontSize="80" Margin="25,0,25,0" StrokeThickness="0" Background="{StaticResource ItemBackgroundThemeBrush}"/>
    <StackPanel Orientation="Horizontal" x:Name="NonEssentialsNearRight">
    <player:SkipAheadButton x:Name="SkipAheadButton" ViewModel="{TemplateBinding ViewModel}" Visibility="Collapsed" Size="70" FontSize="40" Margin="10,0,10,0" Padding="0,-10,0,0" StrokeThickness="0" Background="{StaticResource ItemBackgroundThemeBrush}"/>
    <player:FastForwardButton x:Name="FastForwardButton" ViewModel="{TemplateBinding ViewModel}" Visibility="{Binding IsFastForwardButtonVisible, RelativeSource={RelativeSource TemplatedParent}, Converter={StaticResource VisibleIfConverter}}" Size="70" FontSize="40" Margin="10,0,10,0" StrokeThickness="0" Background="{StaticResource ItemBackgroundThemeBrush}"/>
    <player:SkipNextButton x:Name="SkipNextButton" ViewModel="{TemplateBinding ViewModel}" Visibility="{Binding IsSkipNextButtonVisible, RelativeSource={RelativeSource TemplatedParent}, Converter={StaticResource VisibleIfConverter}}" Size="70" FontSize="40" Margin="10,0,10,0" StrokeThickness="0" Background="{StaticResource ItemBackgroundThemeBrush}"/>
    </StackPanel>
    </StackPanel>
    <Grid x:Name="TimelineContainerGrid" Grid.Row="1" Height="60" HorizontalAlignment="Left">
    <Grid x:Name="TimelineContainer" Background="{StaticResource ItemBackgroundThemeBrush}">
    <Grid Margin="30,4,30,7">
    <Grid.ColumnDefinitions>
    <ColumnDefinition Width="Auto"/>
    <ColumnDefinition Width="*"/>
    <ColumnDefinition Width="Auto"/>
    </Grid.ColumnDefinitions>
    <player:TimeElapsedButton x:Name="TimeElapsedButton" Grid.Column="0" ViewModel="{TemplateBinding ViewModel}" Visibility="{Binding IsTimeElapsedButtonVisible, RelativeSource={RelativeSource TemplatedParent}, Converter={StaticResource VisibleIfConverter}}" Margin="8,0,8,0"/>
    <player:Timeline Height="5" Padding="0,10,0,10" x:Name="Timeline" Grid.Column="1" ViewModel="{TemplateBinding ViewModel}" Visibility="{Binding IsTimelineVisible, RelativeSource={RelativeSource TemplatedParent}, Converter={StaticResource VisibleIfConverter}}" Margin="8,0,8,0">
    <player:Timeline.SliderStyle>
    <Style TargetType="player:SeekableSlider">
    <Setter Property="Foreground" Value="{StaticResource ButtonForegroundThemeBrush}"/>
    <Setter Property="SliderTrackDecreasePressedBackground" Value="{StaticResource ButtonPressedForegroundThemeBrush}" />
    <Setter Property="SliderTrackDecreasePointerOverBackground" Value="{StaticResource ButtonPointerOverForegroundThemeBrush}" />
    <Setter Property="SliderThumbStyle">
    <Setter.Value>
    <Style TargetType="Thumb">
    <Setter Property="Template">
    <Setter.Value>
    <ControlTemplate TargetType="Thumb">
    <Canvas HorizontalAlignment="Center" VerticalAlignment="Top" Margin="-18,-38,18,0">
    <Grid>
    <Ellipse Stroke="{StaticResource ButtonForegroundThemeBrush}" Fill="{StaticResource ButtonPressedForegroundThemeBrush}" StrokeThickness="2" Width="35" Height="35"/>
    <Path Fill="{StaticResource ButtonForegroundThemeBrush}" Margin="0,0,0,-7" VerticalAlignment="Bottom" HorizontalAlignment="Center" Data="M 0,0 8,0 4,8Z"/>
    </Grid>
    </Canvas>
    </ControlTemplate>
    </Setter.Value>
    </Setter>
    </Style>
    </Setter.Value>
    </Setter>
    </Style>
    </player:Timeline.SliderStyle>
    </player:Timeline>
    <player:TimeRemainingButton x:Name="TimeRemainingButton" Grid.Column="2" ViewModel="{TemplateBinding ViewModel}" Visibility="{Binding IsTimeRemainingButtonVisible, RelativeSource={RelativeSource TemplatedParent}, Converter={StaticResource VisibleIfConverter}}" Margin="8,0,8,0"/>
    <player:DurationButton x:Name="DurationButton" Grid.Column="2" ViewModel="{TemplateBinding ViewModel}" Visibility="{Binding IsDurationButtonVisible, RelativeSource={RelativeSource TemplatedParent}, Converter={StaticResource VisibleIfConverter}}" Margin="8,0,8,0"/>
    </Grid>
    </Grid>
    </Grid>
    </Grid>
    </Border>
    </Grid>
    </ControlTemplate>
    </Setter.Value>
    </Setter>
    </Style>
    Iam Getting the above mentioned error at the Bolded parts of the code. How to Resolve this Error, Help me.
    Mohan Rajesh Komatlapalli

    Hello,
    Technically the PlayerFramework is not supported in this forum. For PlayerFramework specific questions you should post to the
    Discussion Topics for Player Framework forum. In this case though it looks like the issue is more specific to your XAML binding implementation then the framework itself.
    Are you getting the error in the XAML designer or at runtime? Do you know the underlying hex code associated with the error message?
    -James
    Windows SDK Technologies - Microsoft Developer Services - http://blogs.msdn.com/mediasdkstuff/

  • Error 48: File or folder not found when using photomerge panorama - imac photoshop elements 10

    Any help is appreciated.  Followed the photomerge panorama instructions and got error 48: file or folder not found.....line 16 ...
    using photoshop elements 10 on imac with OSX 10.8.2
    Thx

    Have you recently updated your Operating system? Please try repairing permissions for your hard disk.
    Please check the help document to know more about repairing permissions http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html#main_Solutio n_3__Repair_Disk_Permissions

  • "ERROR 21 the device is not ready" when use dism get-wiminfo

    I want to retrieve information about the OS images that are contained in a wim file.
    "dism /Get-WimInfo /WimFile:d:\sources\install.wim "was typed in the command line (system manager)
    but error 21 happened "the device is not ready". Actually I know little about computer and don't know how to fix it.
    the log file says as follows,
    2015-04-20 13:12:36, Info                  DISM   PID=5204 TID=7720 Scratch directory set to 'C:\Users\luckiing\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
    2015-04-20 13:12:36, Info                  DISM   PID=5204 TID=7720 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
    2015-04-20 13:12:36, Info                  DISM   PID=5204 TID=7720 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadLocalImageSession
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Failed to get and initialize the PE Provider.  Continuing by assuming that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Provider has previously been initialized.  Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Provider has previously been initialized.  Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Manager: PID=5204 TID=7720 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Provider has previously been initialized.  Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: 
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: 
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.2.9200, Running architecture=amd64, Number of processors=8
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Dism.exe version: 6.2.9200.16384
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Executing command line: dism  /Get-WimInfo /WimFile:d:\sources\install.wim
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Provider has not previously been encountered.  Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll. - CDISMProviderStore::Internal_LoadProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Provider has not previously been encountered.  Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Loading Provider from location C:\Windows\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Connecting to the provider located at C:\Windows\System32\Dism\WimProvider.dll. - CDISMProviderStore::Internal_LoadProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Provider has not previously been encountered.  Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Loading Provider from location C:\Windows\System32\Dism\VHDProvider.dll - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Connecting to the provider located at C:\Windows\System32\Dism\VHDProvider.dll. - CDISMProviderStore::Internal_LoadProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Provider has not previously been encountered.  Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Loading Provider from location C:\Windows\System32\Dism\ImagingProvider.dll - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Connecting to the provider located at C:\Windows\System32\Dism\ImagingProvider.dll. - CDISMProviderStore::Internal_LoadProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Provider has not previously been encountered.  Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Loading Provider from location C:\Windows\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Connecting to the provider located at C:\Windows\System32\Dism\CompatProvider.dll. - CDISMProviderStore::Internal_LoadProvider
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: FolderManager
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: WimManager
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: WimManager.
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: VHDManager
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: GenericImagingManager
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: GenericImagingManager.
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Getting Provider WimManager - CDISMProviderStore::GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Provider has previously been initialized.  Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Error                 DISM   DISM WIM Provider: PID=5204 WIM open failed. - CWimImageInfoCollection::Initialize(hr:0x80070015)
    2015-04-20 13:12:36, Error                 DISM   DISM WIM Provider: PID=5204 base\ntsetup\opktools\dism\providers\wimprovider\dll\wimimageinfocollection.cpp:76 - CWimImageInfoCollection::CreateWimImageInfoCollection(hr:0x80070015)
    2015-04-20 13:12:36, Error                 DISM   DISM WIM Provider: PID=5204 TID=7720 Failed to create the image info collection. - CWimManager::GetImageInfoCollection(hr:0x80070015)
    2015-04-20 13:12:36, Error                 DISM   DISM WIM Provider: PID=5204 TID=7720 base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:3248 - CWimManager::InternalOpGetImages(hr:0x80070015)
    2015-04-20 13:12:36, Error                 DISM   DISM WIM Provider: PID=5204 TID=7720 base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:4043 - CWimManager::InternalCmdGetImages(hr:0x80070015)
    2015-04-20 13:12:36, Error                 DISM   DISM WIM Provider: PID=5204 TID=7720 Error executing command - CWimManager::InternalExecuteCmd(hr:0x80070015)
    2015-04-20 13:12:36, Error                 DISM   DISM WIM Provider: PID=5204 TID=7720 base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:1928 - CWimManager::ExecuteCmdLine(hr:0x80070015)
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: 
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: 
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Found the OSServices.  Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Disconnecting Provider: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Disconnecting Provider: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Releasing the local reference to DISMLogger.  Stop logging. - CDISMProviderStore::Internal_DisconnectProvider

    Hi,
    According to the DISMI log, it seems like there is a problem with the WIM file. However, you can try to change a location for test to check its information.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for

  • How to make my old file info panel from photoshop work in xmp

    Help. Not a photoshop guy but rather a genealogist. Many years ago downloaded a custom file info panel for photoshop which I used to enter meta text about the family photos I scanned. Currently using adobe creative cloud but cant figure out how to us

  • Capturing footage without timecodes

    I love editing with Final Cut Express, but capturing footage is a nightmare. The program keeps trying to locate timecode breaks on my Hi8 tape during capture, which results in me losing three to four seconds of footage from the beginning of each scen

  • Transition from Microsoft Word to Pages

    Can I set up Pages simply as a word processor? I'm a former Microsoft Word user, and I'm having a difficult time making the transition to Pages for simple documents.

  • Images in my Aperture 3 libraries have lost their original "date created"

    Just made a very discouraging discovery regarding the "date created" field for my photos. Noticed that all photos in any project default to the same date created, even if they weren't shot on the same date. Not sure what date they're all defaulting t

  • Getting "Internet Connect Could not open the communication device"

    I am getting a pop up showing "Internet Connect - Could not open the communication device." Why is this? I have never got it before and after awhile my internet works just fine. I am trying to understand why it's popping up. The wireless networks I c