Error importing network device using CSV file

While importing a CSV file of a single network device, I am getting this error:
Value for attribute TrustSecDeviceID is Mandatory
In the CSV template (downloaded from ISE web gui), I don't see a field TrustSecDeviceID. What is the error referring to?

Kashish,
This looks like a bug but I attached a template that you can use and i tested with my ise 1.1.1 patch 1 and it worked fine, just replace the fields that I entered and you should be good to go! Were you able to get the password reset successfully on the PSNs?
Good luck!
Tarik Admani
*Please rate helpful posts*

Similar Messages

How to import network devices on ISE 1.2

Hi, experts,
I'm trying to import network devices on ISE 1.2.0.899
so I downloaded the template and opened with notepad and wrote all the nessesarry information.
and I tried to upload to ISE, and it just said import failed. no reason..
does anyone know how to do it ?

Hi jiyoung
This import failed error might occur due to following reasons so please make sure that :
You are not running two import jobs of the same resource type at the same time. For example, you cannot concurrently run two import jobs to import network devices from two different import files.
More over please make sure that while configuring the network devices you are performing job from a super admin or network device admin group.
Best Regards:
Muhammad Munir
Hi, experts,
I'm trying to import network devices on ISE 1.2.0.899
so I downloaded the template and opened with notepad and wrote all the nessesarry information.
and I tried to upload to ISE, and it just said import failed. no reason..
does anyone know how to do it ?

Import data from excel/csv file in web dynpro

Hi All,
I need to populate a WD table by first importing a excel/CSV file thru web dynpro screen and then reading thru the file.Am using FileUpload element from NW04s.
How can I read/import data from excel / csv file in web dynpro table context?
Any help is appreciated.
Thanks a lot
Aakash

Hi,
Here are the basic steps needed to read data from excel spreadsheet using the Java Excel API(jExcel API).
jExcel API can read a spreadsheet from a file stored on the local file system or from some input stream, ideally the following should be the steps while reading:
Create a workbook from a file on the local file system, as illustrated in the following code fragment:
          import java.io.File;
          import java.util.Date;
          import jxl.*;
         Workbook workbook = Workbook.getWorkbook(new File("test.xls"));
On getting access to the worksheet, once can use the following code piece to access individual sheets. These are zero indexed - the first sheet being 0, the second sheet being 1, and so on. (You can also use the API to retrieve a sheet by name).
          Sheet sheet = workbook.getSheet(0);
After getting the sheet, you can retrieve the cell's contents as a string by using the convenience method getContents(). In the example code below, A1 is a text cell, B2 is numerical value and C2 is a date. The contents of these cells may be accessed as follows
Cell a1 = sheet.getCell(0,0);
Cell b2 = sheet.getCell(1,1);
Cell c2 = sheet.getCell(2,1);
String a1 = a1.getContents();
String b2 = b2.getContents();
String c2 = c2.getContents();
// perform operations on strings
However in case we need to access the cell's contents as the exact data type ie. as a numerical value or as a date, then the retrieved Cell must be cast to the correct type and the appropriate methods called. The code piece given below illustrates how JExcelApi may be used to retrieve a genuine java double and java.util.Date object from an Excel spreadsheet. For completeness the label is also cast to it's correct type. The code snippet also illustrates how to verify that cell is of the expected type - this can be useful when performing validations on the spreadsheet for presence of correct datatypes in the spreadsheet.
String a1 = null;
Double b2 = 0;
Date c2 = null;
                    Cell a1 = sheet.getCell(0,0);
                    Cell b2 = sheet.getCell(1,1);
                    Cell c2 = sheet.getCell(2,1);
                    if (a1.getType() == CellType.LABEL)
                       LabelCell lc = (LabelCell) a1;
                       stringa1 = lc.getString();
                     if (b2.getType() == CellType.NUMBER)
                       NumberCell nc = (NumberCell) b2;
                       numberb2 = nc.getValue();
                      if (c2.getType() == CellType.DATE)
                        DateCell dc = (DateCell) c2;
                        datec2 = dc.getDate();
                       // operate on dates and doubles
It is recommended to, use the close() method (as in the code piece below)   when you are done with processing all the cells.This frees up any allocated memory used when reading spreadsheets and is particularly important when reading large spreadsheets.
          // Finished - close the workbook and free up memory
          workbook.close();
The API class files are availble in the 'jxl.jar', which is available for download.
Regards
Raghu

I need to import data from a CSV file to an Oracle table

I need to import data from a CSV file to an Oracle table. I'd prefer to use either SQL Developer or SQL Plus code.
As an example, my target database is HH910TS2, server is ADDb0001, my dB login is em/em, the Oracle table is AE1 and the CSV file is AECSV.
Any ideas / help ?

And just for clarity, it's good to get your head around some basic concepts...
user635625 wrote:
I need to import data from a CSV file to an Oracle table. I'd prefer to use either SQL Developer or SQL Plus code.SQL Developer is a GUI front end that submits code to the database and displays the results. It does not have any code of it's own (although it may have some "commands" that are SQL Developer specific)
SQL*Plus is another front end (character based rather than GUI) that submits code to the database and displays the results. It also does not have code of it's own although there are SQL*Plus commands for use only in the SQL*Plus environment.
The "code" that you are referring to is either SQL or PL/SQL, so you shouldn't limit yourself to thinking it has to be for SQL Developer or SQL*Plus. There are many front end tools that can all deal with the same SQL and/or PL/SQL code. Focus on the SQL and/or PL/SQL side of your coding and don't concern yourself with limitations of what tool you are using. We often see people on here who don't recognise these differences and then ask why their code isn't working when they've put SQL*Plus commands inside their PL/SQL code. ;)

How can i import contacts from a csv file to "iCloud Contacts"?

How can I import contacts from a csv file to "iCloud Contacts"?

The only way I know of to import cells from a csv file is by creating a new file. But then you can select the desired cells and copy them to the other file. I just did it to be sure it works.
1. Create the new spreadsheet file via the upload command.
2. Select the cells (table) that you want to move to the other file and press command+C (copy).
3. Close the new file and open the existing file.
4. Select the top/right cell of the area to receive the copied "table" and press commant+V (paste).
I hope this is what you're trying to do!

Error loading transaction data from csv file

Hello all
I am getting the following error when loading from a .csv file:
Error 'The argument '-65.025,60' cannot be interpreted as a number' on assignment field BALANCE record 1 value -65.025,60
The BALANCE field is defined as : 0D_BALANCE (from the SAP Demo Cubes).
Any help on this is appreciated.
TIA

Thank you all for your help
I made the changes. I was still getting the error until I had changed one item.
Under the FIELDS tab, I set the "FORMAT" to "External".
After doing this, all worked well.
Thanks again!

AAA authentication for networking devices using ACS 4.1 SE

Hi!!!
I want to perform AAA authentication for networking devices using ACS 4.1 SE.
I do have Cisco 4500, 6500,2960, 3750, 3560, ASA, CSMARS, routers (2821) etc in my network. I want to have radius based authentication for the same.
I want telnet, ssh has,console attempt to be verified by radius server & if ACS goes down then it will be via local enable passwordf.
For all users i need to have different privilege levels based upon which access will be granted.
could u plz send me the config that is required to be done in the active devices as well as ACS!!!!

Pradeep,
Are you planning MAC authentication for some users while using EAP for others?
For MAC authentication, just use the following in your AP.
aaa authentication login mac_methods group radius
In your AP, select the radius server for mac authentication. You must have already defined your ACS as a radius server.
In your SSID configuration, under client authentication settings,
check "open authentication" and also select "MAC Authentication" from the drop-down list.
If you want both MAC or EAP, then select "MAC Authentication or EAP" from the dropdown.
Define the mac address as the username and password in ACS. Make sure the format of the mac is without any spaces.
You will not need to change anything in XP.
NOTE: XP normally does not require user authentication if machine has already authenticated but it might behave differently. If it does, I can let you know the registry settings to force the behaviour change.
HTH

Transfer using CSV-files

Hello! In our project we discussing about possibility to use CSV-files to transfer information.
Can I use CSV in PI ?

Hi,
Yes you can. Use File adapter to read and do a file content conversion on it. By doing it the CSV format will be converted to XML format in PI
Lot of weblgs are available on this
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/sundararamaprasad.subbaraman/blog/2005/12/09/making-csv-file-lookup-possible-in-sap-xi
/people/rahul.nawale2/blog/2006/07/18/java-mapping-an-alternate-way-of-reading-a-csv-file
/people/swaroopa.vishwanath/blog/2005/06/24/generic-approach-for-validating-incoming-flat-file-in-sap-xi--part-1
Regards
Suraj
Edited by: S.R.Suraj on Sep 30, 2009 9:18 AM

After the upgrade to Mozilla 32 using csv files to import data does not work anymore. What should I do?

Hello,
After the latest upgrade to Mozilla 32 a previously recorded imacros scirpt in which the data was being imported into mozilla from a csv file keeps erroring out. This same problem occurred with the with the upgrade to Mozilla 30 and was fixed when Mozilla was upgraded to 31. Can you please advise on how to correct the problem so that csv files can be used in conjunction with imacros scripts. I would like to point out that imacros still works without the use of csv files, but when you introduce a csv to the script the imacros does not work.
Thank you,
Eugene

hello eugene, please directly contact the imacros extension developers through the means provided at their [http://forum.iopus.com/viewforum.php?f=11 forum] - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon for new firefox versions. thank you...

How can I import data from a csv file into databse using utl_file?

Hi,
I have two machines (os is windows and database is oracle 10g) that are not connected to each other and both are having the same database schema but data is all different.
Now on one machine, I want to take dump of all the tables into csv files. e.g. if my table name is test then the exported file is test.csv and if the table name is sample then csv file name is sample.csv and so on.
Now I want to import the data from these csv files into the tables on second machine. if I've 50 such csv files, then data should be written to 50 tables.
I am new to this. Could anyone please let me know how can I import data back into tables. i can't use sqlloader as I've to satisfy a few conditions while loading the data into tables. I am stuck and not able to proceed.
Please let me know how can I do this.
Thanks,
Shilpi

Why you want to export into .csv file.Why not export/import? What is your oracle version?
Read http://www.oracle-base.com/articles/10g/oracle-data-pump-10g.php
Regards
Biju

How to import old iPhone SMS.CSV file into new iPhone?

Hey everyone,
So I've spent a couple days on this as I just upgraded to the iPhone5S from my 4S. Long story short, my backup restore didn't work after multiple tries (gave me the file is corrupt or not compatible with the iPhone error).
I tried:
-reinstalling itunes
-updating itunes
-combining the 5S backup with the old 4S backup
-tinyumbrella
and a few of other things as I've forgot now.
The most important things I needed was the contact list and SMS history. I've got the contact list from extracting is successfully from the iTunes backup folder and using iCloud, but cannot figure out how to import the SMS.CSV file into my iPhone5S.
Any suggestions on how I can get my SMS messages from my iPhone4s into my 5S?
If anyone has any other suggestions on getting my Backup Restore to work that would be awesome too!
Thanks!

A word on SMS text messages. It is pracitcally impossible to import an SMS text-messages file to a new iPhone and have the Messages app on the new device read the messages.
You can transfer, however contacts and other individual data (such as calendars and notes) from one iphone to the next. I had my old Nokia which whose contacts I exported to a CSV file. I then imported the file to my iphone which converted the file into multiple contacts in the Contacts app on the iphone. You can use a contact management app such as this one in order to import the contact file to the new iPhone.

Error while creating table from csv file

I am getting an error while creating a table using 'Import Data' button for a csv file containing 22 columns and 8 rows. For primary key, I am using an existing column 'Line' and 'Not generated' options.
ORA-20001: Excel load run ddl error: drop table "RESTORE" ORA-00942: table or view does not exist ORA-20001: Excel load run ddl error: create table "RESTORE" ( "LINE" NUMBER, "PHASE" VARCHAR2(30), "RDC_MEDIA_ID" VARCHAR2(30), "CLIENT_MEDIA_LABEL" VARCHAR2(30), "MEDIA_TYPE" VARCHAR2(30), "SIZE_GB" NUMBER, "RDC_IMG_HD_A" NUMBER, "START_TECH" VARCHAR2(30), "CREATE_DATE" VARCHAR2(30), "RDC_MEDIA_DEST" VARCHAR2(30), "POD" NUMBER, "TAPE" NUMBER, "ERRORS_YN" VA
Any idea?

I am getting an error while creating a table using 'Import Data' button for a csv file containing 22 columns and 8 rows. For primary key, I am using an existing column 'Line' and 'Not generated' options.
ORA-20001: Excel load run ddl error: drop table "RESTORE" ORA-00942: table or view does not exist ORA-20001: Excel load run ddl error: create table "RESTORE" ( "LINE" NUMBER, "PHASE" VARCHAR2(30), "RDC_MEDIA_ID" VARCHAR2(30), "CLIENT_MEDIA_LABEL" VARCHAR2(30), "MEDIA_TYPE" VARCHAR2(30), "SIZE_GB" NUMBER, "RDC_IMG_HD_A" NUMBER, "START_TECH" VARCHAR2(30), "CREATE_DATE" VARCHAR2(30), "RDC_MEDIA_DEST" VARCHAR2(30), "POD" NUMBER, "TAPE" NUMBER, "ERRORS_YN" VA
Any idea?

Automatic import of material data (csv file) from FTP directory

Hello Experts,
We created a Scheduled Task -> Data Import Monitor -> from a FTP directory.
We loaded the .csv file with material data in the FTP folder but it is not getting imported.We have created the .csv file with the format of fields defined in Company quick start Work book -> Material tab. We also tried with a .csv file having first Field as CLASS_NAME with a value of masterdata.Material and rest of the fields same as defined in the Company quick start-Materials Tab still it did not work.
When we load the .xls work book in FTP directory (xl having the Configuration tab and Material tab) the data import is working fine and the data is getting loaded automatically from the data import monitor job.
Is there any specific format of .csv file in which the material data needs to be loaded to the FTP server for automatic import of data using Scheduled task?
Regards
Aditya

Are there any errors appearing in the FPA logs?
Have you checked the permissions on the folder/file that you are uploading from?
What type of scheduled task have you created?

Problem importing specific data from .csv file

Hello!
I'm using JDev 11.1.3.0 with JSF ui and I've been following the excellent example about importing comma separated values from a .csv file, of Mr. Bors, but I have a specific problem...
1) When i try to import a date value (format dd/mm/yyyy) to a date field of my adf table, the date won't be accepted and it's not shown (I'm using Row.setAttribute("Field", textValue) for that purpose). I guess I have to enter it in a specific format but don't know how!
2) Same thing with double values. Tried 1.50 and it's showing on the adf table 0.02. Tried 1,50 (with a different text separator) and it's throwing me an error and doesn't show anything on the table (again i'm using Row.setAttribute("Field", textValue) for that one too)...
Any help would be appreciated!
Thank you
Edited by: Nikolas Saridakis on 6 Νοε 2010 11:10 πμ

I tried your suggestion before I set my question but didn't know if I was looking on the right direction (I tried some things but they didn't work out). After a bit poking everything was fine...
So I used
Row.setAttribute("Field_name", oracle.jbo.domain.Date.fromText(value, "dd/mm/yyyy", null));
and it did the trick...
Weird thing about numbers was that after that, they were entered properly on the table with a normal Row.setAttribute("Field_name", value); with value being a String... anyway!
Thank you Timo!

To to import network devices to CW LMS 3.1

I have an excel spreadsheet which contains a list of network devices.
I understand that you can import to CW by converting it to csv or xml
How do I convert xls to cvs or xml?
Thanks in advance,

Well,
File save as select type .csv
But better create on device manualy in the lms gui, do an export to csv to get the file format and all the right columns
Cheers,
Michel

Error importing network device using CSV file

Similar Messages

Maybe you are looking for