Error in change Number ..pls Help Me..urjent
<b>Hi all..
when i run a transaaction ( Zasd) in PRD with change number 11784 the report works fine. But when i enter
change number 11929 . iwill get error change order not found. but when i use CC03 transactoin with this change number i saw the details for this number..
pls suggest me what i do..i think report is ok.is it right ???? what i do..pls help me..
thanks in advance...
the selection sereen is below....
PARAMETERS: p_chgnr TYPE aennr.
PARAMETERS: p_width TYPE int4 DEFAULT cv_maxmodels.
PARAMETERS: p_anego TYPE c AS CHECKBOX DEFAULT co_true.
get all engineering change details
CREATE OBJECT go_engchange EXPORTING changeorder = p_chgnr.</b>
Hello Papai
In order to track down the problem I would suggest two things you should check with change number 11929:
(1) Does your report actually pass the CREATE OBJECT statement or do the other select-parameters prevent that this change number is found?
(2) If the class used for go_engchange can be publicly instantiated, then call the class builder (SE24) with the class and test it. In test mode you can create an instance using your change number as input.
(3) If instantiation fails then repeat it in debugging mode. Sooner or later you must find the error source.
Regards
Uwe
Similar Messages
-
How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can doHow to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do -
My iphone 4 missing idont know ime number pls help me
sir i want your help my iphone missing i dontknow ime and serial number pls help me
Help you what?
You should be able to find your own serial number. it will not help you find the iphone.
iPhone: Locating the serial number, IMEI, ICCID, or MEID -
Error in change number creating BOM in Engineering Type.
Can anyone guys help me with my problem.
I'm creating Bom using BAPI_MATERIAL_BOM_GROUP_CREATE.
Every time I create BOM Using one bom only in engineering and all BOM for materials were created.
But every time i create rerun the program and have different change number on its components, the error occur,
"Generation not Supported for Change number"
Can anyone help me with this?
Thanks and God Bless.In case errors rollback.... I beleive the following logic would resolve your issue.
constants:c_error_type(1) type c value 'E'.
call function 'BAPI_MATERIAL_BOM_GROUP_CREATE'
exporting
testrun = l_testmode
tables
bomgroup = l_bomgroup
variants = l_variants
items = l_items
subitems = l_subitems
materialrelations = l_materialrelations
itemassignments = l_itemassignments
subitemassignments = l_subitemassignments
return = l_return.
if l_testmode is initial.
read table l_return with key type = c_error_type.
if sy-subrc = 0.
call function 'BAPI_TRANSACTION_ROLLBACK'.
else.
call function 'BAPI_TRANSACTION_COMMIT'.
endif.
Thanks
Anantha -
While creating PO currency is given as EUR error is as follows- pls help
while creating PO currency is EUR & error comes as "Enter Rate EUR/INR Rate Type M for 19.01.2011 in the system settings.
Pls Help.Hi Hmal,
When you are trying to create PO with other than the company code currency system is looking for the equivalent exchange to the company code currency to the given foreign currency.
Before using any curreny we have to maintain the exchange rates in OB08 with the duration then system will take care of further postings
Regards,
Srini Rao -
Error while using utl_smtp,pls help
CREATE OR REPLACE PROCEDURE send_mail (p_sender IN VARCHAR2,
p_recipient IN VARCHAR2,
p_message IN VARCHAR2)
as
l_mailhost VARCHAR2(255) := '10.16.56.30';
l_mail_conn utl_smtp.connection;
BEGIN
l_mail_conn := utl_smtp.open_connection(l_mailhost, 25);
utl_smtp.helo(l_mail_conn, l_mailhost);
utl_smtp.mail(l_mail_conn, p_sender);
utl_smtp.rcpt(l_mail_conn, p_recipient);
utl_smtp.open_data(l_mail_conn );
utl_smtp.write_data(l_mail_conn, p_message);
utl_smtp.close_data(l_mail_conn );
utl_smtp.quit(l_mail_conn);
end;
i create dthe above and when i am running it i am getting the following error
SQL> execute send_mail('[email protected]','[email protected]','hi');
BEGIN send_mail('[email protected]','[email protected]','hi'); END;
ERROR at line 1:
ORA-29278: SMTP transient error: 450 4.7.1 [email protected]..
Relaying temporarily denied. Cannot resolve PTR record for 10.16.56.20
ORA-06512: at "SYS.UTL_SMTP", line 17
ORA-06512: at "SYS.UTL_SMTP", line 96
ORA-06512: at "SYS.UTL_SMTP", line 240
ORA-06512: at "TTK05.SEND_MAIL", line 11
ORA-06512: at line 1
pls help me , i need to send a mail from the above
regHi,
try to use the host-name instead of the IP and check your dns configuration (Cannot resolve PTR record for 10.16.56.20).
(Relaying temporarily denied) -> Some mail-servers are configured to accept only messages for their domain, e.g. mailserver mail.dummy.com only accepts messages to account with name like [email protected] -
hello my ipad 2 mic is not working. I tried vacuuming. Still no changes. Pls Help
Try restoring the IPad. Either plug it into your computer or go to iPad settings, reset, all content and data. Restoring it should fix any software issues if it's a software problem. If that doesn't work it's likely a hardware issue and can't help you there. Have to take it into an apple store or authorized seller.
-
Getting error in sockt programming pls help
i got these 4 warning while i compile my first socket program in windows VC++..
anyone plz helpp me...
Compiling...
server.c
c:\windows\desktop\prasad\socket\server.c(28) : warning C4013: 'bzero' undefined; assuming extern returning int
c:\windows\desktop\prasad\socket\server.c(44) : warning C4013: 'read' undefined; assuming extern returning int
c:\windows\desktop\prasad\socket\server.c(47) : warning C4013: 'write' undefined; assuming extern returning int
c:\windows\desktop\prasad\socket\server.c(32) : warning C4761: integral size mismatch in argument; conversion supplied
server.obj - 0 error(s), 4 warning(s)i have two program server and client..first i compile this server.c file only....
pls help n im jus a bigner
this is the "server.c"
#include <stdio.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <sys/in.h>
void error(char *msg)
perror(msg);
exit(1);
int main(int argc, char *argv[])
int sockfd, newsockfd, portno, clilen;
char buffer[256];
struct sockaddr_in serv_addr, cli_addr;
int n;
if (argc < 2) {
fprintf(stderr,"ERROR, no port provided\n");
exit(1);
sockfd = socket(AF_INET, SOCK_STREAM, 0);
if (sockfd < 0)
error("ERROR opening socket");
bzero((char *) &serv_addr, sizeof(serv_addr));
portno = atoi(argv[1]);
serv_addr.sin_family = AF_INET;
serv_addr.sin_addr.s_addr = INADDR_ANY;
serv_addr.sin_port = htons(portno);
if (bind(sockfd, (struct sockaddr *) &serv_addr,
sizeof(serv_addr)) < 0)
error("ERROR on binding");
listen(sockfd,5);
clilen = sizeof(cli_addr);
newsockfd = accept(sockfd,
(struct sockaddr *) &cli_addr,
&clilen);
if (newsockfd < 0)
error("ERROR on accept");
bzero(buffer,256);
n = read(newsockfd,buffer,255);
if (n < 0) error("ERROR reading from socket");
printf("Here is the message: %s\n",buffer);
n = write(newsockfd,"I got your message",18);
if (n < 0) error("ERROR writing to socket");
return 0;
} -
Error!Urgent!Pls Help.....Thank You
I had the following error with the code below.......anyone pls help me ..... urgent.....I will be really appreciate it......Thank you in advanced.....
I had created two statement,.....one is to select the value of Leave_Reason from a table and store it in the String Leave_Reason after that I need to insert the Leave_Reason variable's value together with other value which input from a form in the previous page....into another table....
But I dun know why I encountered the error below....anyone pls help.....really urgent.....I had tried to solve it for two days already,,,,,
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 86 in the jsp file: /SilkAir/leave_request.jsp
Generated servlet error:
[javac] Compiling 1 source file
C:\Tomcat 4.1\work\Standalone\localhost\_\SilkAir\leave_request_jsp.java:315: cannot resolve symbol
symbol : variable Leave_Reason
location: class org.apache.jsp.leave_request_jsp
String Query = "INSERT INTO Leave_Application (Emp_Num, Leave_ID, Apply_Date, Leave_Date, Leave_Reason, Leave_Applied, Leave_Status) VALUES ('" + Emp_Num + "', '" + Leave_ID + "', '" Apply_Date "', '" + Leave_Date + "', '" + Leave_Reason + "', '" + Day + "', 'Pending')";
^
1 error
at org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:130)
at org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:293)
at org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:340)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:352)
at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:474)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:184)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:260)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2415)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:432)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:386)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:534)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:530)
at java.lang.Thread.run(Thread.java:536)
<request.jsp>
<%@page import="java.sql.*"%>
<%@page import="java.util.Date"%>
<%@page import="java.text.SimpleDateFormat"%>
<html>
<head>
<title></title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<%
String username = (String)session.getAttribute("username");
%>
<%
//define connection
Connection con = null;
try{
//get the class
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
//get the connection
con = DriverManager.getConnection("jdbc:odbc:Database","","");
//please catch your exceptions!
catch(Exception e){
out.println(e.getMessage());
// form data
String Emp= request.getParameter("txtEmp");
String Leave_ID = request.getParameter("txtReason");
java.text.SimpleDateFormat sdf = new java.text.SimpleDateFormat("yyyy/MM/dd");
String LeaveDate = request.getParameter("txtLeaveDate");
java.util.Date dateU = sdf.parse(LeaveDate);
java.sql.Date Leave_Date = new java.sql.Date(dateU.getTime());
String Day = request.getParameter("txtDay");
java.text.SimpleDateFormat rd = new java.text.SimpleDateFormat("yyyy/MM/dd");
String ApplyDate = request.getParameter("txtApplyDate");
java.util.Date dateR = rd.parse(ApplyDate);
java.sql.Date Apply_Date = new java.sql.Date(dateR.getTime());
// query statement
ResultSet rs=null;
Statement SQLStatement = con.createStatement();
Statement stm = con.createStatement();
String query = "SELECT DISTINCT LeaveType FROM Leave WHERE Leave_ID ='"+Leave_ID+"'";
rs = stm.executeQuery(query);
if(rs.next())
String Leave_Reason = rs.getString("LeaveType");
else
{ out.println("no results found");
rs.close();
stm.close();
String Query = "INSERT INTO Application (Emp, Leave_ID, Apply_Date, Leave_Date, Leave_Reason, Leave_Applied, Leave_Status) VALUES ('" + Emp_Num + "', '" + Leave_ID + "', '" Apply_Date "', '" + Leave_Date + "', '" + Leave_Reason + "', '" + Day + "', 'Pending')";
// get result code
int SQLStatus = SQLStatement.executeUpdate(Query);
if(SQLStatus != 0)
out.println("post successfully.");
else
out.println("Problem encountered");
// close connection
SQLStatement.close();
con.close();
%>
</body>
</html>if(rs.next())
String Leave_Reason = rs.getString("LeaveType");
else
{ out.println("no results found");
rs.close();
stm.close();
String Query = "INSERT INTO Application (Emp, Leave_ID, Apply_Date, Leave_Date, Leave_Reason, Leave_Applied, Leave_Status) VALUES ('" + Emp_Num + "', '" + Leave_ID + "', '" Apply_Date "', '" + Leave_Date + "', '" + Leave_Reason + "', '" + Day + "', 'Pending')";
The Problem is that the variable Leave_Reason is declared as a local variable inside a if block. So the scope of the variable is not visible outside the if block...
Try using something like
String Leave_Reason = "";
if(rs.next())
Leave_Reason = rs.getString("LeaveType");
else
{ out.println("no results found");
This should work...
Hope it helps.
Thanks and regards,
Pazhanikanthan. P -
Sql error in request.jsp - pls help
hi every1, can some1 pls help me. the situation is:- when someone renewed a book the date_Return has to be increased by 7 days.
to test i'm using the following:-
String sql="update resources set date_Return= '2003-01-22'";
also can u pls tell me how to convert the date to UK date.
thanking u in advance1) The easiest way to do the update would be to use your DBMSs
built-in date functionality. If date_Return is a date datatype
in your DBMS then there should be a function to add a number of
days to it. For example, in Sybase, you could write your UPDATE
statement as:
"update resources set date_Return = DateAdd(day, 7, date_Return)".
2) If, by UK date, you mean day-month-year, you can format the date
using the java.text.SimpleDateFormat.
http://java.sun.com/j2se/1.4.1/docs/api/java/text/SimpleDateFormat.html -
Pls help...
See the actions for the error message included here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting -
All my Apps on iPod 3 stopped running suddenly. Tried Reset also, still no change. Pls Help
Update the version of your software to current and latest updated version, it will be fine.
-
Hi
I wanted to refresh my dev environment quickly..
As we also wanted to migrate from exp/imp to datapump, I tried these..
Only thing worked for me is impdp on network mode using remap schema.
1)First i wanted to implement expdp and impdp standard procedures(Full database export/import)
My expdp failed with the following error on a full export..
Pls see below:
C:\Documents and Settings\oracle2>expdp system/<p.w> full=Y directory=DATA_PUMP_DIR dumpfile=OAPFULL.dmp logfile=OAPFULL.log
Export: Release 11.1.0.7.0 - Production on Thursday, 26 April, 2012 16:12:49
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Starting "SYSTEM"."SYS_EXPORT_FULL_02": system/******** full=Y directory=DATA_PUMP_DIR dumpfile=OAPFULL.dmp logfile=OAPFULL.log
Estimate in progress using BLOCKS method...
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 4.351 GB
Processing object type DATABASE_EXPORT/TABLESPACE
Processing object type DATABASE_EXPORT/PASSWORD_VERIFY_FUNCTION
Processing object type DATABASE_EXPORT/PROFILE
Processing object type DATABASE_EXPORT/SYS_USER/USER
Processing object type DATABASE_EXPORT/SCHEMA/USER
Processing object type DATABASE_EXPORT/ROLE
Processing object type DATABASE_EXPORT/GRANT/SYSTEM_GRANT/PROC_SYSTEM_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/GRANT/SYSTEM_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/ROLE_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/DEFAULT_ROLE
Processing object type DATABASE_EXPORT/SCHEMA/TABLESPACE_QUOTA
Processing object type DATABASE_EXPORT/RESOURCE_COST
Processing object type DATABASE_EXPORT/SCHEMA/DB_LINK
Processing object type DATABASE_EXPORT/TRUSTED_DB_LINK
Processing object type DATABASE_EXPORT/SCHEMA/SEQUENCE/SEQUENCE
Processing object type DATABASE_EXPORT/SCHEMA/SEQUENCE/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type DATABASE_EXPORT/DIRECTORY/DIRECTORY
Processing object type DATABASE_EXPORT/DIRECTORY/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type DATABASE_EXPORT/CONTEXT
Processing object type DATABASE_EXPORT/SCHEMA/PUBLIC_SYNONYM/SYNONYM
Processing object type DATABASE_EXPORT/SCHEMA/SYNONYM
ORA-39014: One or more workers have prematurely exited.
ORA-39029: worker 1 with process name "DW01" prematurely terminated
ORA-31672: Worker process DW01 died unexpectedly.
Job "SYSTEM"."SYS_EXPORT_FULL_02" stopped due to fatal error at 16:14:562)As the above failed, I tried impdp with network_link import and full=y and its a different issue!
impdp system/<p.w> NETWORK_LINK=OAPLIVE.WORLD full=y logfile=OAPDRfull2.log table_exists_
action=REPLACE
Import: Release 11.1.0.7.0 - Production on Thursday, 26 April, 2012 13:36:01
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** NETWORK_LINK=OAPLIVE.WORLD full=y logfile=OAPDRfull2.log table_exists_action=REPLACE
Estimate in progress using BLOCKS method...
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 4.670 GB
Processing object type DATABASE_EXPORT/TABLESPACE
ORA-31684: Object type TABLESPACE:"SYSAUX" already exists
*************lots more of object already exists errors here............(space limit so cant paste)***************
ORA-31684: Object type SYNONYM:"GEOPROD"."EXT_POSTAIM_PRESORT_61" already exists
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.DISPATCH_WORK_ITEMS [SYNONYM:"GEOPROD"."EXT_POSTAIM_PRESORT_61"]
ORA-31600: invalid input value 200001 for parameter HANDLE in function CLOSE
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA", line 569
ORA-06512: at "SYS.DBMS_METADATA", line 4731
ORA-06512: at "SYS.DBMS_METADATA", line 792
ORA-06512: at "SYS.DBMS_METADATA", line 4732
ORA-06512: at "SYS.KUPW$WORKER", line 2718
ORA-03113: end-of-file on communication channel
ORA-02055: distributed update operation failed; rollback required
ORA-02063: preceding lines from OAPLIVE.WORLD
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW$WORKER", line 7858
----- PL/SQL Call Stack -----
object line object
handle number name
242F2F2C 18256 package body SYS.KUPW$WORKER
242F2F2C 7885 package body SYS.KUPW$WORKER
242F2F2C 8657 package body SYS.KUPW$WORKER
242F2F2C 1545 package body SYS.KUPW$WORKER
241DDF3C 2 anonymous block
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA []
ORA-31642: the following SQL statement fails:
SELECT unique ku$.seq# from sys.metanametrans$ ku$ WHERE ku$.htype='DATABASE_EXPORT' AND ku$.model='ORACLE' AND NOT ( ku$.seq#>=(select a.seq# from sys.metanametrans$ a where
a.model='ORACLE' and a.htype='DATABASE_EXPORT' and a.name ='DATABASE_EXPORT/SCHEMA/SYNONYM')) order by ku$.seq#
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_METADATA_INT", line 5002
ORA-01427: single-row subquery returns more than one row
ORA-06512: at "SYS.DBMS_
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.KUPW$WORKER", line 7853
----- PL/SQL Call Stack -----
object line object
handle number name
242F2F2C 18256 package body SYS.KUPW$WORKER
242F2F2C 7885 package body SYS.KUPW$WORKER
242F2F2C 2744 package body SYS.KUPW$WORKER
242F2F2C 8523 package body SYS.KUPW$WORKER
242F2F2C 1545 package body SYS.KUPW$WORKER
241DDF3C 2 anonymous block
Job "SYSTEM"."SYS_IMPORT_FULL_01" stopped due to fatal error at 13:39:48So its basically these 2 issues I want to know how to fix.
1-expdp error cause and fix
2-impdp error cause and fix -Also how to avoid object alreay exists error?
Also for example the package etc. is the same name..but i want new package from LIVE so it means if the same name package, view, etc is there, it wouldnt get updated?
Any way to overcome this?
I need it exactly same as LIVE...(with a few exceptions which is small enough i can do after impdp finishes fine)
Pleaseeeeeeee help!!
Thanks&Regards.......Hi..
Thanks for the links..I applied the tips on each of them but it didnt work.
Also my database is 11g so it is not true that this happens on 10g only.
Things tried:
1)I tried with different values on parallel parameter but same error
2)I applied the following:
alter system set open_cursors=1024 scope=spfile;
alter system set "_optimizer_cost_based_transformation"=off;
commit;
The 3rd link was bit better
I tried to find out where exactly the error was causesusing
expdp attach =SYS_EXPORT_FULL_03
But I cant figure out what the object : PUBLIC
oracle/context/isearch/GetPage
is..?
Does this needs to be excluded from the export?if so, how?
Can someone help how to fix the error now?
Processing object type DATABASE_EXPORT/SCHEMA/SYNONYM
ORA-39014: One or more workers have prematurely exited.
ORA-39029: worker 1 with process name "DW01" prematurely terminated
ORA-31672: Worker process DW01 died unexpectedly.
Job "SYSTEM"."SYS_EXPORT_FULL_03" stopped due to fatal error at 11:29:32
C:\Documents and Settings\ora2>expdp attach=SYS_EXPORT_FULL_03
Export: Release 11.1.0.7.0 - Production on Tuesday, 01 May, 2012 11:35:38
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Username: system
Password:
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Job: SYS_EXPORT_FULL_03
Owner: SYSTEM
Operation: EXPORT
Creator Privs: TRUE
GUID: 8499C802F52A414A8BCACE552DDF6F11
Start Time: Tuesday, 01 May, 2012 11:37:56
Mode: FULL
Instance: geooap
Max Parallelism: 1
EXPORT Job Parameters:
Parameter Name Parameter Value:
CLIENT_COMMAND system/******** parfile=h:\datapump\oapfull.par
State: IDLING
Bytes Processed: 0
Current Parallelism: 1
Job Error Count: 0
Dump File: H:\datapump\oapfull.dmp
bytes written: 4,096
Worker 1 Status:
Process Name: DW01
State: UNDEFINED
Object Schema: PUBLIC
Object Name: oracle/context/isearch/GetPage
Object Type: DATABASE_EXPORT/SCHEMA/PUBLIC_SYNONYM/SYNONYM
Completed Objects: 766
Total Objects: 766
Worker Parallelism: 1 -
Error Submitting Podcast Feed (Pls Help!)
I keep getting an error (11111) when I try to submit my podcast RSS feed.
I'm on Windows Vista. Downloaded and installed the latest version of iTunes today (Feb 1st 2013).
I enter my feed URL, am asked for my password etc (which I enter and works) and then I get this error:
I don't use Safari (I'm using Chrome and Firefox), but the issue seems to be within iTunes itself.
Any suggestions?
I also restarted my computer which did not help.Just wanted to update this so others can benefit from my experience.
As Roger suggested I did email Apple and got a response. That didn't solve the problem as they asked for more information and then I didn't hear back from them (at least not yet).
2 things I learned:
1) Make sure your podcast has at least 1 live episode in it before submitting. (not sure if this is critical or not, but I changed this).
2) I created a new Apple ID and than submitted again. Then it worked right away.
Thanks Roger again for the suggestions and hope that helps others. Now just waiting for Apple to approve the podcast so it's in their store. -
Query to get Week number Pls help
I need to get week number of the current year in the format 2008-W47 ( this is for sysdate
when i try
select to_CHAR(sysdate,'YYYY'||'-IW')
FROM DUAL
i get 2008-47
but in the format 2008-W47
Help
sSQL> select to_CHAR(sysdate,'YYYY')||'-W'||to_char(sysdate,'IW') from dual
2 /
TO_CHAR(
2008-W47
Maybe you are looking for
-
Need Help with Photoshop elements 5.0
I know that this is a very old version of photoshop elements, but I would still like to use it, since I paid $100.00 for it. The problem is that it hasn't been installed onto my computer for awhile and now when I go to install it I get an error msg.
-
Why the micro usb cable doesn't come in the box
When I bought the apple tv the only this that came in the box was the power conector the remote and the apple tv, I been using my apple tv for month or maybe a year and never had a problem, but today when i wake up and tried to turn on the apple tv,
-
I have no other details to add, that I know of. Firefox just does not fill the entire page.
-
Why did the form report only show partial information. About half of those who registered had complete forms. For the other half I have a"red dash" in the report. Now I am nervous about using this again. What happened???@
-
IPod connecting to different computers
I work at a dance studio and to cut and make a CD of a song can I hook up another teachers iPod to my laptop and take that song and edit it and still have that persons iPod work at their house? Thank You for taking the time and helping me.