Error in Converting File Content in a Sender Adapter

Hi everyone.
We are using File content conversion as message protocol for a simple flat file (sender) .
In the sender communication channel we have configured the recordset structure as follows:
order_row.filedNames : orderid,item,quantity,price
order_row.filedSeparator : ,
order_row.endSeparator : 'nl'
Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'order_row.fieldFixedLengths' or 'order_row.fieldSeparator' is missing Mandatory parameter 'order_row.fieldNames': no value found 
In monitoring no XML messages are seen in IDX5.
What is the solution for this kind of problem.

you have to provide values for the recordset structure?
Below i am refering multiple blogs on Content conversion, please refer them to help you get a hand on the same.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter - TAB delimited
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter

Similar Messages

Howto use Converting File Content in Rec. Adapt. to suppress a xml-element

Hi,
we use PI/700, SP6.
I have following structure (example):
<MsgOut>
<Sender>Partner1</Sender>
<Receiver>Partner2</Receiver>
<FlatPayload>
 blabla blabla
</FlatPayload>
</Msgout>
Now I wanna use a XI-File-Adapter to write just a Flat-File with the content (of the element <FlatPayload>):
 blabla blabla
(in other words: I wanna suppress all other xml-elements beside of FlatPayload)
But I'm not able to configurate this with the function "Converting File Content"
I tried different possiblities:
e.g.
setting yyy.fieldFixedLengths = 0 and yyy.fixedLengthTooShortHandling = Cut
(yyy = Sender and Receiver)
or
just defining "MsgOut,FlatPayload" as RecordSet Structure (without Sender and Receiver)
Result: no success.
Now my question: is it possible to suppress some xml-elements?
Thanks for your help!
bye
Wolfgang

HI,
You can suppress the XML Nodes/Elements over here. Not Fields ..
For e.g if your outout xml is like this
<MsgOut>
 <Sender>Partner1</Sender>
 <Receiver>Partner2</Receiver>
<FlatPayload>
 <flatdata> blabla blabla</flatdatat>
</FlatPayload>
</Msgout>
In this case you can suppress the <FlatPayload> node/element here.. Using Cut Parameter in the Receiver File Content COnversion.
/people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12
So in your case, you can restructure your data type as you required.. I have mentioned in vice-versa here
Hope this helps,
Regards,
Moorthy
Message was edited by: Krishna Moorthy P

Supress Column Heading - File Content Conversion in Sender Adapter

Hi,
Let me give a more clear picture about my scenario. I need to convert CSV File to XML output:-
My source file has column heading and values. The sample data is mentioned hereunder:-
PERNR;KID;PNALT;NACHN;NAME2;VORNA
;1200;1200;Angus
I have created a data type as under:-
DT_LegacyEmployee (Category - Complex Type)
     Employees (Category - Element, Occurence - 1)
          Header (Category - Element, Occurence - 0...1)
               PERNR_H
               KID_H
               PNALT_H
               NACHN_H
               NAME2_H
               VORNA_H
          Employee (Categroy - Element, Type - DT_LegacyEmployee_Row, Occurence - 0...unbounded)
               PERNR
               KID
               PNALT
               NACHN
               NAME2
               VORNA
The file conversion parameters in the file sender adapter are mentioned hereunder:-
Document Name - MT_LegacyEmployee
Document Namespace - http://abc.com/xi
Recordset Name - Employees
Rescordset Structure - Header,1,Employee,*
Recordsets per Message - 1
Key Field Type - String (Case Sensitive)
Employee.fieldSeparator - ;
Employee.endSeparator - 'nl'
Employee.fieldNames - PERNR,KID,PNALT,NACHN,NAME2,VORNA
I dont' have a key field value. How do we remove the header and show only the values in the xml output. I have searched the forum topics as well checked many blogs related to file content conversion, but nothing helped. Kindly advice how to fix this issue. Thanks in advance.
Regards.
Praveen

Hi Praveen,
Change your File Adapter as below
Document Name - MT_LegacyEmployee
Document Namespace - http://abc.com/xi
Recordset Name - Employees
Rescordset Structure - Employee,*
Recordsets per Message - 1
Key Field Type - String (Case Sensitive)
Employee.fieldSeparator - ;
Employee.endSeparator - 'nl'
Employee.fieldNames - PERNR,KID,PNALT,NACHN,NAME2,VORNA
There is no need for the Header required in the data type.
DT_LegacyEmployee (Category - Complex Type)
Employees (Category - Element, Occurence - 1)
Employee (Categroy - Element, Type - DT_LegacyEmployee_Row, Occurence - 0...unbounded)
PERNR
KID
PNALT
NACHN
NAME2
VORNA
Now the trick is in the mapping program
Lets assume your mapping looks like
MT_LegacyEmployee ---> MT_TargetEmployee
- Employees ---> Records
   - Employee ---> Record
     - PERNR ---> TargetPERNR
     - .. so on
When you do a mapping from Employee ---> Record apply the following logic.
(PERNR)--->
             (TestEquals =) --->(NOT)--->
(Constant) --->                                (IF)
(PERNR)                       (IF Without Else) ---> (Record)
                                               (THEN)
                            (Employee)--->
When doing this make sure RightClick on PERNR and Select Context ---> Employees.
By default context would be from Employee and it will give you an error of XSD format. So make sure you are changing the context.

XI 3.0 File Adapter: Converting File Content in Sender Adapter

Hi,
This is probably a basic question but does anyone have an example of the parameters used when you are using the 'Converting File Content' option on the File Adapter ?
Also, where do the record sets have to be defined ? Are these data types in the Integration Builder ?
The documentation is to say the least a bit flaky.
Any help would be appreciated.
Kind regards
Colin.

Hello,
I'm wondering if someone has experience setting up conversion for different record structures. The example shown (in a greate way) only picture one kind of structure.
How should it be done if the file would contain
10Mat1
20100PCS
The first record structure has columns
ID(2),Material(10)
The second redcord structure has columns
ID(2),Quantity(3), Unit of messure (3)
Brgds
Kalle

File Content Conversion Problem: Sender File Adapter

Hi All,
In Sender File Adapter, how to spilt the single line into different lines using + as a separator. Plz see below my source file.
#SMESS=IV01:672633SAP:676968:::NL51:02:11+
COPS=678713:676968:070416:IV01'3:11IVFR=678713:PDA and'IND 2'9206 AD'Dtn'INIVDA=070416IVNR=6264008195:676968add1
#EMESS=0+
In above txt file there are 3 lines.
1st line starts with #SMESS
2nd line starts with COPS
3rd line starts with #EMESS.
In 2nd line, if u observe there are 3 lines separating by +. My task is, I have to spilt the 2nd line into 3 lines using + separator.
I already used the xx.endSeparator as '+' to spilt the line but it is not working....
Could anyone help me how to do this. This is very urgent
Thnx,
Kumar.

Hi Shankar,
1) My Expected XML Structure:
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_IV01 xmlns:ns="http://ms.com/dev/ms">
- <Recordset>
- <DT_SMESS>
<D_9901>IV01</D_9901>
<D_9902>672633SAP</D_9902>
<D_9903>676968</D_9903>
<D_9904 />
<D_9905 />
<D_9906>NL51</D_9906>
<D_9907>02</D_9907>
<D_9908>11</D_9908>
</DT_SMESS>
- <DT_COPS_2>
<D_C022>678713</D_C022>
<D_C023>676968</D_C023>
<D_C008>070416</D_C008>
<D_C111>IV01'3</D_C111>
<D_H559>11</D_H559>
</DT_COPS_2>
- <DT_IVFR_2>
<D_C024>678714</D_C024>
<D_D333>PDA and'IND 2'9206 AD'Dtn'IN+</D_D333>
</DT_IVFR_2>
- <DT_IVDA_2>
<D_D365>070416</D_D365>
</DT_IVDA_2>
- <DT_IVNR_2>
<D_D189>6264008195</D_D189>
<D_H364>676968add1</D_H364>
</DT_IVNR_2>
- <DT_EMESS>
<D_D9901_1>0</D_D9901_1>
</DT_EMESS>
</Recordset>
</ns:MT_IV01>
2) I am not getting any error even if I use key Fields or Not becoz in the RecordSet Structure I mentioned DataType, 1 instead of DataType, *.
3) FCC Parameters:
Document Name: MT_IV01
Document Namespace: http://ms.com/dev/ms
Recordset Structure: DT_SMESS,1,DT_COPS_2,1,DT_IVFR_2,1,DT_IVDA_2,1,DT_IVNR_2,1,DT_EMESS,1
Recordset Sequence: Ascending
Key Field-type : String (Case-sensitive)
4) Error:
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'DT_COPS_2':java.lang.Exception: ERROR in configuration: more elements in file csv structure than field names specified!

Error in reciever file content conversion

Hi
I have the following error in the file content conversion
Could not process due to error: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)'
my content conversion is :
Recordset Structure : FI_Banks_Header_MT,Line
FI_Banks_Header_MT.fieldSeparator = 'nl'
FI_Banks_Header_MT.fieldSeparator = ;
my xml is :
<FI_Banks_Lines_MT>
****<Line>
<FIELD1>12799</FIELD1>
<FIELD2>721042</FIELD2>
<FIELD3>0620</FIELD3>
<FIELD4>20.06.06</FIELD4>
<FIELD5>5575688</FIELD5>
****</LINE>
</FI_Banks_Lines_MT>
The file gets ok !!! but I still get this error in adapter monitor after the file is converted all the time
any1 managed to solve it ? thx , Shai

Hey sorry for the previous one...
try out this...
Recordset Structure : FI_Banks_Lines_MT
FI_Banks_Lines_MT.endSeparator = 'nl'
FI_Banks_Lines_MT.fieldSeparator = ;
hope this helps !!!...
Cheers.,
Esha

ERROR :Conversion of file content to XML failed at position 0

Hi Frnds,
I have a File to File scenario, while testing I am getting the following error:
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 1 according to structure 'TA_830':java.lang.Exception: Consistency error: field(s) missing - specify 'lastFieldsOptional' parameter to allow this
Can any one please tell me why Iam getting this error even I have provided the following informantion in channel configuration. Here TA_830 is the record name.
TA_830.processFieldNames     fromConfiguration
TA_830.fieldNames     SEG_NUM,PROCESS_DATE,PAYEE_BCODE,ISSUE_SEQ_NUM,CR_DATE,PAYER_BCODE,PAYER_ID,ENTRY_SEQ_NUM,TRAN_TYPE,PAYMENT_TYPE,PROCESS_FLAG,REF_NUM,PAYER_ACC,VAL_DATE,ISO_CURRENCY,AMOUNT,RESV_11,SEG_NUM,EXCHG_RATE,ADDR1,ADDR2,ADDR3,ADDR4,RESV_18,SEG_NUM,BANK_ID,BANK_CODE,ADDR1,ADDR2,ADDR3,ADDR4,RESV_5,SEG_NUM,ACCOUNT,ADDR1,ADDR2,ADDR3,ADDR4,RESV_6,SEG_NUM,MESSAGE1,MESSAGE2,MESSAGE3,MESSAGE4,RESV_6,SEG_NUM,MESSAGE1,MESSAGE2,MESSAGE3,MESSAGE4,RESV_6,SEG_NUM,PROCESS_DATE,PAYEE_BCODE,ISSUE_SEQ_NUM,CR_DATE,PAYER_BCODE,PAYER_ID,ENTRY_SEQ_NUM,TRAN_TYPE,PAYMENT_TYPE,PROCESS_FLAG,TOTAL_AMOUNT,RESV_59
TA_830.fieldFixedLengths     2,6,12,5,6,7,5,5,3,1,1,16,24,6,3,15,11,2,12,24,24,24,24,18,2,1,24,24,24,24,24,5,2,24,24,24,24,24,6,2,30,30,30,30,6,2,30,30,30,30,6,2,6,12,5,6,7,5,5,3,1,1,16,59
TA_830.fieldContentFormatting     nothing
Regards,
Shiva.

Hi,
As you are using Fixed Length File...use below specified parameters:
TA_830.fieldName:          Names of Fields in teh File
TA_830.fieldFixedLegths: Lenghts as per your file
TA_830.keyFieldValue:    If you use any value as key
TA_830.lastFieldsOptional: YES
TA_830.endSeparator :        'nl'
This will help you out..
Thanks,
Kishore.

File content conversion on Sender Side

Hi,
I am doing file content conversion on sender side.when i am executing the scenario,i am getting the following error in sxmb_moni:
Invalid at the top level of the document. Error processing resource 'file:///D:/Documents and Settings/...............
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> DOC_HEADER ...
when i right click on the pyaload and select view source
its displaying the whole flat file with the following line at the beginning:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
i have given all the parameters correctly....
in sxmb_moni.....the error category is Mapping and the error id id EXCEPTION_DURING_EXECUTE
Please help me with this error.
thanks n regards,
anuradha

Hi !!
The best way to debug would be to add TRACE statements in your mappigs. In both Graphical and java Mapping.
Trace out the entire output of java mapping and see if this is the input that the next mapping expects.
For trace , http://help.sap.com/saphelp_nw04/helpdata/en/c8/98e7d5c1620642973565ea3dd319d1/content.htm
refr this links also
Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Name expected
unsported character error in message mapping
Re: HTTP to RFC Mapping error:com.sap.aii.utilxi.misc.api.BaseRuntimeException:
Exception com.sap.aii.utilxi.misc.api.BaseRuntimeException
Re: Outbound error
Re: mapping error
error in file to file
have a look at this weblog on how to test your mapping
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
Thanks !!!

How can I convert my specific file content in the Receiver Adapter(XI 7.0)?

Hi all,
I have a document structure as below:
<MT_MATERIAL>
 <MATERIAL>
 <WERKS>1000</WERKS>
 <MATNR>HAD_00001</MATNR>
 <MAKTX>CHEMICAL MATERIAL</MAKTX>
 </MATERIAL>
</MT_MATERIAL>
This document structure is the file content in the Receiver Adapter (File Adapter). In the 'Content Conversion' tab of File Adapter of Communication Channel 'CC_OUT_MATERIAL_FILE', I have configured the parameters as below:
Recordset Structure: MATERIAL
MT_MATERIAL.fieldSeparator: '
MT_MATERIAL.endSeparator: 'nl'
MATERIAL.fieldSeparator: '
MATERIAL.endSeparator: 'nl'
*.fieldSeparator: ,
But, this Communication Channel 'CC_OUT_MATERIAL_FILE' (in the Runtime WorkBench/Component Monitoring/Adapter Engine/Communication Channel Monitoring) is error with the error message as below:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '.fieldFixedLengths' or '.fieldSeparator' is missing
Could anyone please help me to correct this error, how should i configure the parameters in the 'Content Conversion' tab?
Thanks a lot in advance,
Vinh Vo

Hi Vinho,
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
Have a look at the this blog by Arpit Seth ... its all about FCC at receiver side...
File Receiver with Content Conversion
Also have a look at this thread.. might be helps you....
RECEIVER file CONTENT CONVERSION
Above links be helpful.
Regards,
Jayasimha Jangam

Converting File Content.Unexpected XML format

Hello,
I need to convert file content in File Receiver Adapter.
In my opinion, i have unexpected XML format of a payload message. (At least, the format does not contain a structure element):
That is,
I have the XML message:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_BW ID="123" BirthDay="20/03/1969" Title="consultant" Name="John" LastName="Smith" xmlns:ns0="http://sap.com/xi/BASIS"/>
I need to convert it into plane text format with fieldseparator.
How to convert this xml message into plane text format if it does not contain any structure elements (that is, <struc1> <field1>value</field1> </struc1>) according to help guide?
How should i configure RecordSet in File Adapter?
I am confused.
Thank you

Igor,
Are u getting the format from the source?
<ns0:MT_BW ID="123" BirthDay="20/03/1969" Title="consultant" Name="John" LastName="Smith" xmlns:ns0="http://sap.com/xi/BASIS"/>
If yes, then create one more data type with structure
<Record>
<ID/>
<BirthDay/>
<Title/>
<Name/>
<LastName/>
</Record>
And do direct mapping. So now you can easily configure the content conversion for the target format isn't it?
Its my thought, I don't know whether its feasible for you or not..
raj.

Content conversion in sender adapter.

Hi,
I have a problem with the content conversion in sender adapter.
I need only process the csv file with the exact number of columns containing the structure, if the csv file contains more o less columns in the csv file, I want that this files are not relayed by the adapter and remain on the server.
Thank you very much for your help.

@ Hareen
This can be achieved at mapping level. You need to check the number of columns that are comming in the file using Count function. If the number of count is equal to the value specified then will process the message else raises a mapping exception.
Are you talking about "count" function in the message mapping? that function won't count the number of fields / columns, but would count the number of occurrence of a particular field.

File Content Conversion in JMS Adapter

Hello,
I am trying to use module parameters to convert File to XML in Sender JMS adapter. I have followed the instructions in the SAP document (3.1 Example of a Simple Conversion in a Sender Communication Channel)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50061bd9-e56e-2910-3495-c5faa652b710
The problem I am facing is instead of creating one xml message for all the lines in the file; it is creating one message per line. Not sure what I need to do get all the lines in to one xml message.
Please let me know if any of you have faced similar issue.
Thanks
AV

The Parameter xml.recordsetsPerMessage can only be used if it is a complex structure. I mean it needs a recordSet with Keys..etc and What I am trying to do is a simple FCC using
Transform.Class=com.sap.aii.messaging.adapter.Conversion
Transform.ContentType=text/xml;charset=utf-8
xml.conversionType=SimplePlain2XML
xml.documentName=PurchaseOrder_Root
xml.documentNamespace=http://namespace
xml.fieldFixedLengths =2,10,10,3,..
xml.fieldNames = DATA1,DATA2,DATA3....
xml.processFieldNames=fromConfiguration
xml.structureTitle=PurchaseOrder
I am expecting
<PurchaseOrder_Root>
<PurchaseOrder>
<DATA1> </DATA1>
<DATA2> </DATA2>
</PurchaseOrder>
<PurchaseOrder>
<DATA1> </DATA1>
<DATA2> </DATA2>
</PurchaseOrder>
</PurchaseOrder_Root>
When I use the above Module Config it is giving me 
</PurchaseOrder_Root>
<PurchaseOrder>
<DATA1> </DATA1>
<DATA2> </DATA2>
</PurchaseOrder>
</PurchaseOrder_Root>
</PurchaseOrder_Root>
<PurchaseOrder>
<DATA1> </DATA1>
<DATA2> </DATA2>
</PurchaseOrder>
</PurchaseOrder_Root>

File Content Conversion in Sender Adapater

Hi Folks ,
I am doing a file 2 file scneario using content conversion at both end
My i/p and o/p is file is tab delimited
My source xml structure is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:file_sender_mt xmlns:ns0="urn:filetofiledemo">
 <recordset>
 <data1>
 <keyfield/>
 <age1/>
 </data1>
 <data>
 <name/>
 <keyfield/>
 <age/>
 <loc>
 <keyfield/>
 </loc>
 </data>
 </recordset>
</ns0:file_sender_mt>
Data and location have the mapping 1.. unbounded
while data1 has the mapping 1.1
When I am trying to read it as a tab delimited flat file.
These are the parameters that i have set
Document Name file_sender_mt
Document Namespace urn:filetofiledemo
Recordset Name recordset
Recordset Structure data1,1,data, ,loc,
Key Field Name keyfield
data1.fieldNames keyfield,age1
ignoreRecordsetName true
recordset.fieldSeparator '0'
data1.fieldSeparator '0x09'
data1.keyFieldValue 01
data1.endSeparator '0'
data.beginSeparator '0x09'
data.fieldSeparator '0x09'
data.fieldNames name,keyfield,age
data.keyFieldValue 02
loc.fieldSeparator '0x09'
loc.beginSeparator '0x09'
loc.endSeparator '0'
loc.keyFieldValue 03
loc.fieldNames keyfield
My file is getting picked up . I dont see any message in message monitoring and neither anything in moni .
No error in adapater
but the file is not getting created .
if i change the message protocol to file and send t above xml file . the scneario works fine
any reasons for the above behaviour
Thanks
Amit

I have found you cant use nested element in sender adapater
so i have chnage my source structure to
Now if i give my i/p file as
01 age1
02 25 03
file is getting pciked up
bt if i give it as
01 age1 02 25 03
which is the structure i expect my i/p file it is failing to read with the error
Error: Conversion of complete file content to XML format failed around position 0: Exception: ERROR converting document line no. 1 according to structure 'data1':java.lang.Exception: ERROR in configuration: more elements in file csv structure than field names specified!
Does The special character ´0´ is not a separator character.
not work for sender adapater bcoz in reciever i am able to get o/p in one line and tab delimited
any idea
and since i have given my keyfield as the second field in data
02 would come at the second palce
Thanks
Amit

File Content Conversion in Sender File

how to convert a fixed length flat file without end seperator sent to XI to a xml form?
Pleasegive me the idea of Sender Adapter configuration details (esp endSeperator)

Hi,
For file content convertion if there are fixed lenth then no need to give the feildseperator,just give the fixed lenths for all the feild in FCC.
check below links for FCC
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani.
Reward Points If Helpful

FCC (File Content conversion)-In sender

Hi All,
Using FCC in sender i need to convert text to xml.Such that my text file format is
Line1
Line2
Line3
All the three lines is having some data..My source data type structure is
DT_Emp
>Emp_Info
   >Header
      ID----
(0..1)
   >Details
       Line----
(0..unbounded)
Now i need to get data from text file into only line element..My ID element should be blank..XML should have ID element but it should not be populated from input file.How to get this using FCC..Is there any parameters for this?
Can anyone give some useful ideas
Regards
Venkat

HI,
For FCC Check this links.
File content conversion sites
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
phani

Error in Converting File Content in a Sender Adapter

Similar Messages

Maybe you are looking for