Error in creating reservation number

Hi all,
Iam trying to create reservation number using MB21, but its giveing the error as "Clearing CoCode 112 differs from CoCode 168 of plant 1681."
what is thsi error , how to solve the problem,
I entered mpvement type as 221..
pls anybody help me , iam into technical side , iam trying to create a servation number..
Regards,
pandu

Hi
Its is related to two different company code.
Please check it and revert if required.
Regards,
Anand.

Similar Messages

Error when creating a Number Range

When I use transaction ZNRO to create a number range, I get an error message:
"Invalid call sequence for interfaces when recording changes".
All I did was enter the text and a domain for the numbers. There was an earlier error regarding buffering. It said that I should not use buffering for accounting documents. I am not using this for accounting documents and do not care if numbers get skipped. So I continue through that error.
But after that, the "Invalid call sequence . . ." error pops up.
I searched this forum generally, and with portions of the error text, and do not find any discussion of problems creating number ranges.
The number range I'm created is very simple. I just need "one up" numbers for a custom database used to store custom schedule information.
I'm at release 4.6c.

Here is the error message and text.
I have no idea what it means by "interfaces".
When at release 3.1i, I had no trouble creating number ranges.
<b>Message no. TK 425
Diagnosis
The function you selected uses interfaces to record changes made to your objects in requests and tasks.
Before you save the changes, a check needs to be carried out to establish whether the objects may be changed. This check must be performed before you begin to make changes.
System Response
The function terminates.
Procedure
The function you have used must correct the two Transport Organizer interfaces required. Contact your system administrator.</b>

Error in creating reservation using 'BAPI_RESERVATION_CREATE'

Hi All,
I am using bapi 'BAPI_RESERVATION_CREATE' for creating reservation.But bapi is returning following message.
Cost center XXXX does not exist on 12.01.2009.
What can be the reason for this error ?

hi
try to use BAPI_RESERVATION_CREATE1
hope it helps
regards
Aakash Banga

Error while create reservation

Dear All,
At the time of reservation creation with movement type 201 against cost center i am getting the below error message " The date 4786 not convertable please correct" how to resolve this error..
this error is cominig for that one material only the same cost center with another material its not throw the error.
i have checked in the material master everything is fine..
how to resolve this
Regards
Kumar.

Hi,
Please check the date of reservation while creating the reservation.also please check the stock at mmbe. MMSC will be useful to extend the material to that storage location.
Regards,

Error In Backdated Reservation Creation Base date earlier than current dat

Dear Experts,
Error while creating Reservation for back date.
Base date earlier than Current date.
Can we create backdated reservation ? and post goods issue to the same ?
if it need configuration please explain the steps for allowing creation of backdated reservations.
Thanks in Advance

What is the error message nos.?

Create document number range 03 using internal number assignment in AFAB

Hi Experts,
Where i have to create number range to Depreciation Posting ? Please mentain Transaction code .
I had check T Code:AS08 (No Tick is assign) & FBN1 (Intrenal Tick is assign)
I am doing T Code AFAB
Folowing error coming
Create document number range 03 using internal number assignment
Message no. AA776
Diagnosis
Processing terminated because the document number range 03 for year 2011 was set up with external number assignment.
System Response
For periodic posting of depreciation, you have to create a document number range with internal number assignment, since the document numbers are assigned from Financial Accounting.
Procedure
Change the number assignment for the number range 03 from external to internal in Customizing for Asset Accounting. See SAP Note 890976 for more information.
Waiting for reply
Regards,
Girish

locked. please read the error message and search the IMG (very easy).

Prob with BAPI_GOODSMVT_CREATE when creating wrt Reservation Number

Hi to all,
I have to create Goods Issue with reference to a reservation.I am using the BAPI BAPI_GOODSMVT_CREATE .
But when I am running the BAPI, It is giving the Error 'For reservation 0000001395   0001, no movements can be posted'.
I have pased all the parameters as per the Documentation of the FM, But still I am not able to create Goods Issue. Can any One help me How to achieve this.
GOODSMVT_HEADER
PSTNG_DATE                  10.08.2009
DOC_DATE                      10.08.2009
REF_DOC_NO                  1394
GOODSMVT_CODE-GM_CODE                   = 03
GOODSMVT_ITEM
MATERIAL                            MAT1
PLANT                                  2001
STGE_LOC                           0001
MOVE_TYPE                        201
ENTRY_QNT                        2
ENTRY_UOM                       EA
ENTRY_UOM_ISO               EA
RESERV_NO                      1394
RES_ITEM                           0001
RES_TYPE                          X
Can any one help me whether the data I have Provided is Correct or not.If not Plese help me in Succesfully creating the Goods Issue.
Thanks and Regards
Meshack Appikatla.

Hi,
If you want to do Goods Issue against Reservation, try below mentioned:
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = wa_header
goodsmvt_code = c_mvt_code "Movement code-03
IMPORTING
materialdocument = v_matdoc
TABLES
goodsmvt_item = it_items
return = it_return.
where :
wa_header-pstng_date = sy-datum. "Posting Date
wa_header-doc_date = sy-datum. "Document Date
wa_header-ref_doc_no = <Reservation Number >. "Reference Doc number
In item data:
wa_items-material = < Material Number >. "Material Number
wa_items-plant = <Plant>. "Plant
wa_items-stge_loc = <Storage Location > "Storage Location
wa_items-move_type =261. "Movement Type - '261'
wa_items-orderid = <Order Number from Reservation RESB-AUFNR>
wa_items-reserv_no = <Reservation Number RESB-RSNUM>
wa_items-res_item = <Reservation Item No RESB-RSPOS>
wa_items-res_type = < Record Type RESB-RSART >
wa_items-entry_qnt = quantity
append wa_items to it_items
Hope it helps.
Regards
Hiren K.Chitalia

Recieving ORA-01722 invalid number error while creating a materialized view

Hi,
I am receiving a ORA-01722 invalid number error while creating a materialized view. when run the select statement of the view i don't get any error, but when i use the same select statement to create a materialized view i receive this error. Could any please help in resolving this error. Here is the code i am using to create a materialized view.
CREATE MATERIALIZED VIEW MV_EBS_CH_CLOSED
REFRESH FORCE ON DEMAND
AS
SELECT DISTINCT kr.request_id, org.org_unit_name,
ebs_ch_ticket_type (kr.request_id) ticket_type,
DECODE
(kr.status_code,
'CLOSED_SUCCESS', kr.last_update_date,
'IN_PROGRESS', (SELECT MAX (start_time)
FROM ebs_ch_datastore ecd1
WHERE kr.request_id = ecd1.request_id
AND workflow_step_name =
'Final BA Review and Deployment Exit Criteria')
) closed_date,
substr(krhd.visible_parameter12,1,10) siebel_start_date,
kr.creation_date itg_start_date
FROM kcrt_requests kr,
kcrt_request_types krt,
kcrt_req_header_details krhd, kcrt_request_details krd1,
(SELECT koum.user_id user_id,
DECODE (koup.org_unit_name,
'IT Implementations', 'CHS - Service Management BA',
koup.org_unit_name
) org_unit_name
FROM krsc_org_unit_members koum, krsc_org_units koup
WHERE 1 = 1
AND 'Y' = koup.enabled_flag
AND koum.org_unit_id = koup.org_unit_id
AND EXISTS (
SELECT 'X'
FROM krsc_org_units kouc
WHERE koup.org_unit_id = kouc.org_unit_id
START WITH kouc.parent_org_unit_id =
ANY (SELECT org_unit_id
FROM krsc_org_units krsc_org_units1
WHERE 'Clearinghouse' =
org_unit_name)
CONNECT BY kouc.parent_org_unit_id =
PRIOR kouc.org_unit_id)
UNION
SELECT kou.manager_id user_id,
DECODE
(kou.org_unit_name,
'IT Implementations', 'CHS - Service Management BA',
kou.org_unit_name
) org_unit_name
FROM krsc_org_units kou
WHERE 'Y' = kou.enabled_flag
START WITH kou.parent_org_unit_id =
(SELECT org_unit_id
FROM krsc_org_units krsc_org_units2
WHERE 'Clearinghouse' = org_unit_name)
CONNECT BY kou.parent_org_unit_id = PRIOR kou.org_unit_id) org
WHERE krt.request_type_id = kr.request_type_id
AND krt.request_type_name IN ('Bug Fix', 'IT Enhancement')
and kr.REQUEST_ID = krd1.request_id
and krd1.batch_number = 1
AND kr.request_id = krhd.request_id
AND org.user_id in (krd1.parameter4, krd1.parameter5, krd1.parameter7)
AND ( 'CLOSED_SUCCESS' = kr.status_code
OR 'IN_PROGRESS' = kr.status_code
AND kr.request_id IN (
SELECT request_id
FROM (SELECT DISTINCT request_id,
MAX
(start_time)
closed_date
FROM ebs_ch_datastore
WHERE 'Final BA Review and Deployment Exit Criteria' =
workflow_step_name
GROUP BY request_id))
Thanks,
Shaik Mohiuddin

This error occurs when you try to create a materialized view , but if you run the sql the results are perfectly fine. Well it happend to me also and to fix this I made sure all the coulmns have the same data type which are used in joins or in where clause.
use
where
to_number(col1)=to_number(col2) and to_number(col3)=to_number(col4)
hope this helps..

Error in creating IO file handles for job (number 3152513)

Hi All -
I am using Tidal 5.3.1.307. And the Windows agent that is running these jobs is at 3.0.2.05.
Basically the error in the subject was received when starting a particular job once it was cancelled and a couple of other different jobs a few days before. These jobs have run successfully in the past.
This particular job was running for 500+ minutes when it should run at an estimated 40 minutes. At that time it would not allow for a re-start of the job, it just stayed in a launched status.
Trying to figure out what causes this error.
Error in creating IO file handles for job 3152513
Note - from that being said we were to see 2 instances of this process running at the same time, we noticed some blocking on the DB side of things.
Trying to figure out if this is a known tidal issue or a coding issue or both.
Another side note, after cancelling the 2nd rerun attempt the following error was encountered: Error activating job, Duplicate.
When we did receive the Error creating IO file, the job did actually restart, but Tidal actually lost hooks into it and the query was still running as an orphan on the db server.
Thanks All!

The server to reboot is the agent server. You can try stopping the agent and then manually deleting the file. That may work. When the agent is running the agent process may keep the file locked, so rebooting may not be sufficient.
The numerical folders are found as sub-directories off of the services directory I mentioned. I think the numbers correspond to the job type, so one number corresponds to standard jobs, another to FTP jobs. I'd just look in the numbered directories until you find a filename matching the job number.
The extensions don't really matter since you will want to delete all files that match your job number. There should only be one or two files that you need to delete and they should all be in the same numbered sub-directory.
As to the root cause of the problem, I can't really say since it doesn't happen very often. My recollection is that it is either caused by a job blowing up spectacularly (e.g. a memory leak in the program being launched by Tidal) or someone doing something atypical with the client.

Error while creating new project number

Hi Folks,
I am getting the below error while creating a new project number.
"Oracle Projects failed to generate unique project number. Please contact your system administrator to setup the next number field for automatic project numbering in implementation options window.
Can any expert help me out in this issue?
Thanks in advance.
SPR

Hi,
What u can do is to navigate to setup>>system>> implemention options and project TAB look for the next project number sequence and just increase the next number by 1.
This problem may have come coz there is some project which already have that project number which is next in sequence.
Thanks
-Shivdeep Singh

Serial number error while creating the production order

Hello frds,
I am getting the following error while creating the production order.
"Item 000000 requires exactly 100 serial numbers for the asset".
If i give 100 serial numbers in the order, the error is solved. But i do not want to assign 100 serial numbers, i want to assign only 2 numbers.
I have tried using the new serial number profile also, but it is giving same error.
Kindly guide.
Regards,
Narendra Bora

Dear Narendra
Select the serial number profile and go to serialization procedure and set the ser. usage status 02 - Optional as below.
Procd Procedure description Ser.Usage
PPRL PP order release 02
since the serail number creation is optional for order relase this will allow you to relase with out error and with serail number assigned in partial.
Regards
Soundar

Error when creating interval for number range object

Hi,
I am trying to transport my BW stuff from QA to Production and I am getting the following error in the transport logs. The info objects are inactive in RSA1.
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
Characteristic YRESD: Error when creating interval for number range object BIM0000396
Can some body advise me what's wrong? Is something need to be maintained in number ranges?
Also when I am checking the objects in RSA1, I am getting a message saying "source system WD110 does not exist", WD110 is our dev system. How can I change the source system after transport?
Thanks.
Edited by: Raj G on Mar 20, 2008 11:38 AM

Also when I am checking the objects in RSA1, I am getting a message saying "source system WD110 does not exist", WD110 is our dev system. How can I change the source system after transport?
Which system are you checking this?
refer: Re: Transport Source Systems from DEV to Testing for step to map the source systems for transport

Error while creating a new entity row for LoginPageEO.jbo.RowCreateExceptio

hi all, i am new to OAF i have created a login page and trying to validate to a custom table which had two columns username and password, i am calling function from controller class which is in AM and from AM in turn i am calling function in VOimpl.java file where i am executing my query with whereClause, i am passing two parametere username and password to this function.
if ((uname != null) && (!("".equals(uname.trim()))))
whereClause.append(" UNAME = :");
whereClause.append(bindCount++);
parameters.addElement(uname);
clauseCount++;
if ((pass!= null) && (!("".equals(pass.trim()))))
if (clauseCount > 0)
whereClause.append(" AND ");
whereClause.append(" PASSWORD = :");
whereClause.append(bindCount++);
parameters.addElement(pass);
clauseCount++;
setWhereClause(whereClause.toString());
if (bindCount > 0)
Object[] params = new Object[bindCount];
// the copyInto() is 1.1.8 compliant which is required by ARU
parameters.copyInto(params);
setWhereClauseParams(params);
//System.out.println(getQuery());
executeQuery();
//System.out.println(getRowCount())
when i call this from login page i am getting
Error - oracle.jbo.RowCreateException: JBO-25017: Error while creating a new entity row for LoginPageEO.
Can any one help me out.

If your requirement is not to update any DB Table then don't use an EO. I would suggest the following for your requirement of validating the username and password.
- Create a VO that has the following query. Do not select any EO during the VO creation.
          SELECT 'x'
          FROM <CUSTOM TABLE>
          WHERE <USERNAME COL> = :1
              AND <PASSWORD COL> = :2
        - Have the initQuery(..) Method in your VOImpl, that takes the username and password. Binds them to the VO and executes the query.
- Have a method in your AM to take the username and password as parameters. Make a call to the above VO::initQuery(..)
- In your controller's processFormRequest(..) call this AM Method upon the submit button action.
This should work smoothly.
The following is just for triaging the error that you have. The above steps, should help you achieve your requirement by itself, the below steps would not be required.
Coming back to your issue. Any custom table should have the standard WHO Columns.
- Modify the custom table to have these who columns.
- In the EO Wizard, synchronize the EO to reflect the DB Structure.
- Make sure the EO Attributes are marked updatable.
Cause of your issue: Through you are not creating EO rows programatically, whenever a VO is based on an EO, upon execution of the VO query, EO's are automatically created, based on the number of rows returned by the VO Query. So internally its failing to created the EO Rows. On of the common reason would be that it creates the EO row, but cannot set the attributes from the VO, because the EO Attribute is readonly.
Hope this clarifies.

Error while creating a task for creating an generic task /app/dac/CustomSQ

Hi ,
I have created a sql file in DAC server /app/dac/CustomSQLs/ ,just to fire an update sql in database
In DAC task tab i have created a task with the following:
Command for incremental load :/app/dac/CustomSQLs/DBNameBeforeLoad.sql
Primary source :flatfileconnection
target source:DBCONNECTION_OLAP
Execution type:SQL FILE
Task phase:GENERAL
I created subject area and assembled ,then created a Execution plan.
When i try to execute this EP ,it shows the following error in DAC log:
ANOMALY INFO::: Error while creating a task for creating an generic task /app/dac/CustomSQLs/DBNameBeforeLoad.sql
MESSAGE:::/app/dac/CustomSQLs/DBNameBeforeLoad.sql - invalide template name!
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.TaskInitializationException
com.siebel.analytics.etl.etltask.SQLFileTask.doInit(SQLFileTask.java:69)
com.siebel.analytics.etl.etltask.GenericTaskImpl.init(GenericTaskImpl.java:194)
Does my above configuration is correct ..?

verify the following settings:
1. mapping of ECC plant and storage location and logical system number with the appropriate availability group code since this links the stock types in EWM to ECC org elements (SPRO -> EWM -> Interfaces -> ERP Integration -> Goods movement)
2. ensure the availability group configuration is correct (SPRO -> EWM -> GR Process -> Configure availability group for putaway) - check all applicable nodes in this configuration since the availability group code is assigned in the pertinent storage types

Error while creating a new entity row for testEO

Hi All,
I have a 1st page where I enter the employeeNumber and that particular parameter should get displayed in the 2nd page when I click on the "SubmitButton".I am moving to the 2nd page using pageContext.forwardImmediately.I am passing my parameter with this URL.But, I am getting "Error while creating a new entity row for testEO" in my code before i enter anything in " employeeNumber " field in the 1st page.
My CO code is:
/*===========================================================================+
| Copyright (c) 2001, 2005 Oracle Corporation, Redwood Shores, CA, USA |
| All rights reserved. |
+===========================================================================+
| HISTORY |
+===========================================================================*/
package xxfc.oracle.apps.test.OAProject1.webui;
import com.sun.java.util.collections.HashMap;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.OAWebBeanConstants;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.beans.message.OAMessageTextInputBean;
import oracle.jbo.Row;
import xxfc.oracle.apps.test.OAProject1.server.testVOImpl;
* Controller for ...
public class testCO extends OAControllerImpl
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
* Layout and page setup logic for a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModule am =(OAApplicationModule) pageContext.getApplicationModule(webBean);
testVOImpl vo1 = (testVOImpl)am.findViewObject("testVO1");
vo1.executeQuery();
Row r = vo1.first();
System.out.println("**************Error in the below Line**********************");
Row row = vo1.createRow();
vo1.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
* Procedure to handle form submissions for form elements in
* a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule am =(OAApplicationModule) pageContext.getApplicationModule(webBean);
OAViewObject vo1 = (OAViewObject)am.findViewObject("testVO1");
if(!vo1.isPreparedForExecution())
vo1.executeQuery();
Row row = vo1.getCurrentRow();
am.getOADBTransaction().commit();
String strEvent = pageContext.getParameter(EVENT_PARAM);
if (strEvent.equals("update"))
String custId = pageContext.getParameter("CustID");
pageContext.putParameter("CstID",custId);
HashMap hashMap = new HashMap();
hashMap.put("CustomerId",custId);
am.getOADBTransaction().commit();
pageContext.forwardImmediately("OA.jsp?page=/xxfc/oracle/apps/test/OAProject1/webui/popupPG&CustID=custId",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
hashMap, //hashmap
true,
OAWebBeanConstants.ADD_BREAD_CRUMB_YES
thanks,
Akshata

Hi Niranjana,
It did not work I am getting the same error.does the WHO column order in the table matters? My WHO columns are in the below order:
LAST_UPDATE_DATE
LAST_UPDATED_BY
LAST_UPDATE_LOGIN
CREATION_DATE
CREATED_BY
my error is:
oracle.jbo.RowCreateException: JBO-25017: Error while creating a new entity row for testEO.
It appears on the top of my page as a message.
Thanks,
Akshata
Edited by: Akshata on Mar 15, 2012 12:29 AM

Error in creating reservation number

Similar Messages

Maybe you are looking for