Error in creating Work area

Hi,
While creating Work Area, I am getting following error;
"Internal program error; (SAPLCBIH_WA03 SAPLCBIH_WA00 ERROR_WA_CREATE 3)"
I have already defined the internal & external number ranges. What can be the cause for this error?
Regards,
Mayank

Hi Mayank,
It seems to me that some of the classes that are used in EH&S system are missing in the current client. Try executing IMG activity "Adopt Standard Specification Database Structure".  You must have you the authorization for the client copy. It should resolve the issue. Please let me know if it doesn't.
Thanks,
Akash

Similar Messages

  • Getting error message "Could not create work area" when I open Bridge CC.

    I am getting an error message "Could not create work area" when I open Bridge CC.
    I have reset my workspace. I have closed and opened Bridge CC. I have deleted the !!-$$$AdobeOutputModule.workspace file in /Library/Application Support/Adobe/Bridge CC/Workspaces folder.
    I am not an expert computer user, so please explain in detailed steps like I am 5 years old. Thanks in advance for any help.

    I am experiencing the same problem!
    My mac is OS X Yosemite (10.10.1), Photoshop CC 2014.2.1, Bridge CC 6.1.0.115 and Camera Raw 8.7.0.309

  • Error when initializing work area SYST

    Dear All,
    I am upgrading from SAP 4.7 to ECC 6.0 (Oracle)
    I have upgraded database from Ora 9i to 10g and client from 81x to 10.2.0.2 and kernel to 700.
    Now after startsap .....its hows satrted successfully but on click of logon pad it gives error-
    Error when initializing work area SYST
    Pls help ....wat shd i do now ?
    Regards,
    Ankita.

    Hello Markus,
    I have upgraded to kernel 700 patch level 102 for sun Solaris Sparc system.
    The trace file is as below:
    ****************************dev_wo Tarce file************8
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    M sysno      00
    M sid        DEV
    M systemid   370 (Solaris on SPARCV9 CPU)
    M relno      7000
    M patchlevel 0
    M patchno    102
    M intno      20050900
    M make:      single threaded, ASCII, 64 bit, optimized
    M pid        2953
    M
    M 
    M Thu Aug 23 15:53:05 2007
    M  kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
    M  length of sys_adm_ext is 360 bytes
    M  ***LOG Q01=> ThInit, WPStart (Workproc 0 1 2953) [thxxhead.c   1267]
    M  ThInit: running on host bssldev1
    M  calling db_connect ...
    C  Oracle Client Version: '10.2.0.2.0'
    C  Client NLS settings: AMERICAN_AMERICA.WE8DEC
    C  Logon as OPS$-user to get SAPPRD's password
    C  Connecting as /@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 010307)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 WE8DEC                                                    1  10560cd20  1056147c0  105618168
    C  Attaching to DB Server DEV (con_hdl=0,svchp=105618098,srvhp=10561a3c8)
    C 
    C Thu Aug 23 15:53:06 2007
    C  Starting user session (con_hdl=0,svchp=105618098,srvhp=10561a3c8,usrhp=105614fd8)
    C  Now '/@DEV' is connected (con_hdl 0, nls_hdl 0).
    C  OCI-call failed with -1=OCI_ERROR
    C     SQL error 942: 'ORA-00942: table or view does not exist'
    C  *** ERROR => ORA-942 when accessing table SAPUSER
    [dbsloci.c    11354]
    C  Disconnecting from connection 0 ...
    C  Closing user session (con_hdl=0,svchp=105618098,usrhp=105614fd8)
    C  Now I'm disconnected from ORACLE
    C  Try to connect with default password
    C  Connecting as SAPPRD/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 010307)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 WE8DEC                                                    1  10560cd20  1056147c0  105618168
    C  Starting user session (con_hdl=0,svchp=105618098,srvhp=10561a3c8,usrhp=105614fd8)
    C  Now 'SAPPRD/<pwd>@DEV' is connected (con_hdl 0, nls_hdl 0).
    C  Database NLS settings: AMERICAN_AMERICA.WE8DEC
    C  DB instance DEV is running on bssldev1 with ORACLE version 10.2.0.2.0 since AUG 23, 2007, 15:52:47
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20070823 155305 bssldev1       
    M  db_connect o.k.
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF               (addr: ffffffff78656000, size: 4400000)
    M  SHM_ROLL_AREA          (addr: fffffffe5a000000, size: 134217728)
    M  SHM_PAGING_AREA          (addr: fffffffe54000000, size: 67108864)
    M  SHM_ROLL_ADM               (addr: ffffffff78a8c000, size: 2672386)
    M  SHM_PAGING_ADM          (addr: ffffffff73b00000, size: 656416)
    M  ThCreateNoBuffer          allocated 352144 bytes for 1000 entries at fffffffe4e004000
    M  ThCreateNoBuffer          index size: 3000 elems
    M  ThCreateVBAdm          allocated 7440 bytes (50 server) at ffffffff73a00000
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation std
    X  <ES> Info: use normal pages (no huge table support available)ES initialized.
    B 
    B Thu Aug 23 15:53:07 2007
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 8, CON_ID = -1
    B 
    B Thu Aug 23 15:53:10 2007
    B  dbtbxbuf: Buffer TABL  (addr: fffffffe4c000100, size: 30000000, end: fffffffe4dc9c480)
    B  dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
    B  dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
    B  dbtbxbuf: protect_shm = 0, force_checks = 0
    B  dbtbxbuf: tsize_retry = 14431488
    B  ***LOG BB0=> buffer TABL       started with length 30000000   bytes [dbtbxbuf#2 @ 16178] [dbtbxbuf1617 8]
    B  dbtbxbuf: Buffer TABLP (addr: ffffffff70400100, size: 10240000, end: ffffffff70dc4100)
    B  dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
    B  dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
    B  dbtbxbuf: protect_shm = 0, force_checks = 0
    B  dbtbxbuf: tsize_retry = 5057728
    B  ***LOG BB0=> buffer TABLP      started with length 10240000   bytes [dbtbxbuf#2 @ 16178] [dbtbxbuf1617 8]
    B  dbtbxbuf: Reading TBX statistics:
    B  dbtbxbuf: 3 object entries precreated
    B  Layout of EIBUF buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 432 = 432
    B  2: 8 * 40 = 320
    B  3: 4001 * 64 = 256064
    B  4: 2000 * 160 = 320000
    B  5: 4001 * 8 = 32008
    B  6: 1 * 200 = 200
    B  7: 65 * 8 = 520
    B  8: 28005 * 128 = 3584640
    B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
    B  dbexpbuf: Buffer EIBUF (addr: fffffffe6f800108, size: 4194304, end: fffffffe6fc00108)
    B  ***LOG BB0=> buffer EIBUF      started with length 4096k      bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
    B  Layout of ESM   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 432 = 432
    B  2: 8 * 40 = 320
    B  3: 4001 * 64 = 256064
    B  4: 2000 * 160 = 320000
    B  5: 4001 * 8 = 32008
    B  6: 1 * 200 = 200
    B  7: 65 * 8 = 520
    B  8: 28005 * 128 = 3584640
    B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
    B  dbexpbuf: Buffer ESM   (addr: fffffffe68400108, size: 4194304, end: fffffffe68800108)
    B  ***LOG BB0=> buffer ESM        started with length 4096k      bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
    B  Layout of CUA   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 432 = 432
    B  2: 8 * 40 = 320
    B  3: 3001 * 64 = 192064
    B  4: 1500 * 160 = 240000
    B  5: 3001 * 8 = 24008
    B  6: 1 * 200 = 200
    B  7: 193 * 8 = 1544
    B  8: 10208 * 256 = 2613248
    B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
    B  dbexpbuf: Buffer CUA   (addr: fffffffe50dec108, size: 3072000, end: fffffffe510da108)
    B  ***LOG BB0=> buffer CUA        started with length 3000k      bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
    B  Layout of OTR   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 432 = 432
    B  2: 8 * 40 = 320
    B  3: 4001 * 64 = 256064
    B  4: 2000 * 160 = 320000
    B  5: 4001 * 8 = 32008
    B  6: 1 * 200 = 200
    B  7: 81 * 8 = 648
    B  8: 28004 * 128 = 3584512
    B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
    B  dbexpbuf: Buffer OTR   (addr: fffffffe63800108, size: 4194304, end: fffffffe63c00108)
    B  ***LOG BB0=> buffer OTR        started with length 4096k      bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
    B  ***LOG BB0=> buffer CALE       started with length 500000     bytes [dbcalbuf#4 @ 2228] [dbcalbuf2228 ]
    B  dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
    B   max_blocking_factor =   5,  max_in_blocking_factor      =   5,
    B   min_blocking_factor =   5,  min_in_blocking_factor      =   5,
    B   prefer_union_all    =   0,  prefer_join                 =   0,
    B   prefer_fix_blocking =   0,  prefer_in_itab_opt          =   1,
    B   convert AVG         =   0,  alias table FUPD            =   0,
    B   escape_as_literal   =   1,  opt GE LE to BETWEEN        =   0,
    B   select *            =0x0f,  character encoding          =SBCS / <none>:-,
    B   use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
    B                         rule_fae->0, concat_fae->0, concat_fae_or->0
    M 
    M Thu Aug 23 15:53:11 2007
    M  SecAudit(RsauInit): Start init of Security Audit Log for first wp.
    M  SecAudit(RsauInit): Shared memory for Security Audit Log already exists.
    M  SecAudit(RsauInit): Re-initialize with new profile parameters
    M  SecAudit(RsauShmInit): SCSA size................ = 4096
    M  SecAudit(RsauShmInit): addr of SCSA............. = ffffffff75f00000
    M  SecAudit(RsauShmInit): addr of RSAUSHM.......... = ffffffff75f00450
    M  SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = ffffffff75f00488
    M  SecAudit(RsauShmInit): addr of RSAUSLOTS........ = ffffffff75f00494
    M  SecAudit(RsauShmInit): SHM version.............. = 5
    M  SecAudit(RsauShmInit): SHM Slot version......... = 2
    M  SecAudit(RsauShmInit): RSAU active.............. = 0
    M  SecAudit(RsauShmInit): number of slots possible. = 10
    M  SecAudit(RsauShmInit): number of slots requested = 2
    M  SecAudit(RsauShmInit): number of slots used..... = 2
    M  SecAudit(RsauShmInit): user selection........... = 0
    M  SecAudit(RsauShmInit): max size of one file..... = 0 KB
    M  SecAudit(RsauShmInit): max size of all files.... = 102400 KB
    M  SecAudit(RsauGetCurrentProfile): Init of shared memory completed
    M  SecAudit(RsauGetCurrentProfile): Security Audit Log not active
    M  SsfSapSecin: automatic application server initialization for SAPSECULIB
    N  SsfSapSecin: Looking for PSE in database
    N  SsfPseLoad: started...(path=/usr/sap/DEV/DVEBMGS00/sec, AS=bssldev1, instanceid=00)
    N  SsfPseLoad: Downloading file /usr/sap/DEV/DVEBMGS00/sec/SAPSYS.pse (client:    , key: SYSPSE, len: 1077)
    N  SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
    N  MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
    N  MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
    M  CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    M  CCMS: AlMsUpload called by wp 0.
    M 
    M Thu Aug 23 15:53:14 2007
    M  CCMS: AlMsUpload successful for /usr/sap/DEV/DVEBMGS00/log/ALMTTREE (1387 MTEs).
    S 
    S Thu Aug 23 15:53:15 2007
    S  *** init spool environment
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 10594d3e0
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  1 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at fffffffe510de060
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at fffffffe510de368
    S    using messages for server info
    S  size of spec char cache entry: 165024 bytes (timeout 100 sec)
    S  size of open spool request entry: 1192 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A 
    A  -PXA--
    A  PXA INITIALIZATION
    A  System page size: 8kb, total admin_size: 5152kb, dir_size: 5112kb.
    A  Attached to PXA (address fffffffe42000000, size 150000K)
    A  abap/pxa = shared protect gen_remote
    A  PXA INITIALIZATION FINISHED
    A  -PXA--
    A 
    A  ABAP ShmAdm attached (addr=fffffffe7054a000 leng=20938752 end=fffffffe71942000)
    A  >> Shm MMADM area (addr=fffffffe70772058 leng=144768 end=fffffffe707955d8)
    A  >> Shm MMDAT area (addr=fffffffe70796000 leng=18530304 end=fffffffe71942000)
    A  RFC Destination> destination bssldev1_DEV_00 host bssldev1 system DEV systnr 0 (bssldev1_DEV_00)
    A  RFC Options> H=bssldev1,S=00,d=1,
    B  table logging switched off for all clients
    A  RFC FRFC> fallback activ but this is not a central instance.
    A   
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 1
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    A  RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
    A  RFC Method> initialize RemObjDriver for ABAP Objects
    M  ThrCreateShObjects          allocated 8352 bytes at ffffffff72b00000
    N  SsfSapSecin: putenv(SECUDIR=/usr/sap/DEV/DVEBMGS00/sec): ok
    N  SsfSapSecin: PSE /usr/sap/DEV/DVEBMGS00/sec/SAPSYS.pse found!
    N 
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF trace level is 0 .
    N  ===...SSF library is /usr/sap/DEV/SYS/exe/run/libsapsecu.so .
    N  ===...SSF hash algorithm is SHA1 .
    N  ===...SSF symmetric encryption algorithm is DES-CBC .
    N  ===...sucessfully completed.
    N  =================================================
    M  *** ERROR => SlicLikeyGetAllRecords: RS_OPEN failed rc=32 [sliclikey.c  988]
    M  *** ERROR => likey_init: likeyche_fill_buffer: couldn't get the list of all records from the persistence. [sliclikey.c  1269]
    M  *** ERROR => SlicLikeyInit: likey_init failed: 1 [sliclikey.c  261]
    M  *** ERROR => SAPlicense: LIKEY initialisation failed! [slicshm.c    268]
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    M  JrfcVmcRegisterNativesDriver o.k.
    W  =================================================
    W  === ipl_Init() called
    W    ITS Plugin: Path dw_gui
    W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
    W    ITS Plugin: sizeof(SAP_UC) 1
    W    ITS Plugin: Release: 700, [7000.0.102.20050900]
    W    ITS Plugin: Int.version, [33]
    W    ITS Plugin: Feature set: [13]
    W    ===... Calling itsp_Init in external dll ===>
    W  === ipl_Init() returns 0, ITSPE_OK: OK
    W  =================================================
    E  Replication is disabled
    E  EnqCcInitialize: local lock table initialization o.k.
    E  EnqId_SuppressIpc: local EnqId initialization o.k.
    E  EnqCcInitialize: local enqueue client init o.k.
    S  server @>SSRV:bssldev1_DEV_00@< appears or changes (state 1)
    M  *** ERROR => R/3 release 620 is not supported with this kernel (700) [thxxsick.c   237]
    A  *** ERROR => R/3 release 620 is not supported with this kernel (700) [sapicc.c     1082]
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A 
    A Thu Aug 23 15:53:17 2007
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Thu Aug 23 15:53:17 2007
    A 
    A  ABAP Program ????????????????????????????????????????.
    A  Source                                          Line 0.
    A  Error Code SYSTEM_CANT_CLEAR.
    A  Module  $Id: //bas/700_REL/src/krn/runt/abinit.c#15 $ SAP.
    A  Function ab_isyst Line 1401.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  ** RABAX: end no http/smtp
    A  ** RABAX: end RX_BTCHLOG|RX_VBLOG
    A  Error when initializing the work area SYST..
    A 
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A 
    A Thu Aug 23 15:53:18 2007
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Thu Aug 23 15:53:18 2007
    A 
    A  ABAP Program ????????????????????????????????????????.
    A  Source                                          Line 0.
    A  Error Code SYSTEM_CANT_CLEAR.
    A  Module  $Id: //bas/700_REL/src/krn/runt/abinit.c#15 $ SAP.
    A  Function ab_isyst Line 1401.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A 
    A Thu Aug 23 15:53:34 2007
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A 
    A Thu Aug 23 15:53:36 2007
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Thu Aug 23 15:53:36 2007
    A 
    A  ABAP Program ????????????????????????????????????????.
    A  Source                                          Line 0.
    A  Error Code SYSTEM_CANT_CLEAR.
    A  Module  $Id: //bas/700_REL/src/krn/runt/abinit.c#15 $ SAP.
    A  Function ab_isyst Line 1401.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  ** RABAX: end no http/smtp
    A  ** RABAX: end RX_GOTO_SAPDEXT
    A  Error when initializing the work area SYST..
    A 
    M  ***LOG R47=> ThResFree, delete (001024) [thxxmode.c   1364]
    A 
    A Thu Aug 23 15:54:19 2007
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A 
    A Thu Aug 23 15:54:20 2007
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Thu Aug 23 15:54:20 2007
    A 
    A  ABAP Program ????????????????????????????????????????.
    A  Source                                          Line 0.
    A  Error Code SYSTEM_CANT_CLEAR.
    A  Module  $Id: //bas/700_REL/src/krn/runt/abinit.c#15 $ SAP.
    A  Function ab_isyst Line 1401.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A 
    A Thu Aug 23 15:54:31 2007
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A 
    A Thu Aug 23 15:54:33 2007
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Thu Aug 23 15:54:33 2007
    A 
    A  ABAP Program ????????????????????????????????????????.
    A  Source                                          Line 0.
    A  Error Code SYSTEM_CANT_CLEAR.
    A  Module  $Id: //bas/700_REL/src/krn/runt/abinit.c#15 $ SAP.
    A  Function ab_isyst Line 1401.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  ** RABAX: end no http/smtp
    A  ** RABAX: end RX_BTCHLOG|RX_VBLOG
    A  Error when initializing the work area SYST..
    A 
    Thanks,
    Ankita,

  • Error while creating Work Order

    Hello Experts,
    I am getting below error while creating work order via add-on named beas but the error seems to coming from SBO.
    Please advise.
    Thanks
    Deepak

    Hi,
    Plz check this thread:
    What does this error mean?

  • SAP Error when initializing work area SYST

    Hi,
    We performed a system copy, can start sap, can start the oracle database, and we upgraded the new kernel. However, we still get the error
    "SAP Error when initializing work area SYST"
    when attempting to log-in to SAP thru the GUI. We looked at many logs in the process.
    Please hlep so we can resume post system copy steps.
    the sap system is a BW copy
    A few error lines from certain logs:
    more dev_disp
    Thu Oct 30 23:35:34 2008
    ERROR => DpHdlDeadWp: W14 (pid 3018) died [dpxxdisp.c   14531]
    ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c   6970]
    Thu Oct 30 23:35:36 2008
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2982)
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    more dev_w14
    A  ** RABAX: end no http/smtp
    more dev_icm
    [Thr 08] Thu Oct 30 23:54:33 2008
    [Thr 08] *** WARNING => IcmJ2EEScheduleFunc: Cannot access "/sap/public/icman" (
    rc=500)- please check node in TA sicf [icxxman_mt.c 2215]
    more dev_icfo
    <ErrorInfo URL="http://:/sap/public/icman">
    <ErrorMessage>Error when initializing the work area SYST.</ErrorMessage>
    <Date>20081029</Date>
    <Time>154639</Time>
    <Client>000</Client>
    <User>SAPSYS</User>
    <TerminationType>RABAX_STATE</TerminationType>
    <ABAP-CallStack>
    </ABAP-CallStack>
    </ErrorInfo>
    Edited by: Jay Elliott on Oct 31, 2008 2:21 PM

    >ERROR => DpHdlDeadWp: W14 (pid 3018) died http://dpxxdisp.c 14531
    the Work process are getting terminated.
    can you please paste full log from dev_w0 and dev_disp and std*
    >we upgraded the new kernel
    why don't you use the same kernel as same as source system?
    cheers,
    -Sunil

  • Error Creating Work Area in JDeveloper for SCM

    In the Repository Object Navigator for 9i SCM, my userID has been granted the the following permissions to a shared work area called pdshare by the owner/build manager:
    Select
    Administrate
    Insert
    Update
    Delete
    Version
    Compile
    Update Spec.
    However, in JDeveloper 9.0.3.1 When I create a work area from this shared work area I keep getting this error:
    "BHART has insufficient privledges to Manage WorkArea".
    Does anyone have suggestions for how to resolve this so that I can access the shared work area?
    Thanks,
    -Brian

    It's actually simple if yyou use dynamic tables and field symbols.
    In the program that calls  methods / attributes in the class
    define some field symbols
    for example
    FIELD-SYMBOLS :
      <fs1>           TYPE  ANY,
      <fs2>           TYPE  STANDARD TABLE,
      <field_catalog> TYPE STANDARD TABLE,
      <dyn_table>    TYPE  STANDARD TABLE,
      <orig_table>   TYPE  STANDARD TABLE,
      <dyn_field>,
      <dyn_wa>.
    in the class define data
    DATA:
    dy_table         TYPE REF TO data,
        dy_line          TYPE REF TO data,
    etc.
    field symbols work both INSIDE and OUTSIDE classes and are extremely useful for passing / receiving data. You have to define the field symbols in your main program however.
    METHOD create_dynamic_table.
    CALL METHOD cl_alv_table_create=>create_dynamic_table
        EXPORTING
             it_fieldcatalog = it_fldcat
          IMPORTING
             ep_table = dy_table.
    ENDMETHOD.
    CALL METHOD me->create_dynamic_table
        EXPORTING
          it_fldcat = it_fldcat
        IMPORTING
          dy_table        = dy_table.
         ASSIGN dy_table->* TO <dyn_table>.
    CREATE DATA dy_line LIKE LINE OF <dyn_table>.
    ASSIGN dy_line->* TO <dyn_wa>.
    ENDMETHOD.
    Then in your program (or class)  your data is in <dyn_table>.
    Use dynamic tables and dynamic field cats as these give HUGE flexibility and you can re-use code over and over again for different structures.
    The new RTTI  gives you any table structure whatsoever so you can make the whole thing completely general.
    That's one of the advantages of Classes and OO as opposed to older FMODS.
    Cheers
    jimbo

  • Error while creating work order from purchase order

    Dear All,
    We are having a subcontracting scenario where we are creating a Work order from PO but getting the below error.
    Error - "No master data assigned to partners-locations-product combination."
    Done all the setting mentioned in the below thread but the error still persist.
    Error in Generating Work order from Purchase Order
    Any suggestions on which master data we need to check?
    Thanks,
    mahesh.

    Hi Mahesh
    In the below transaction
    /SCA/MFGCFG - Work Order Configuration
    Can you maintain Master data Assigment properly
    Valid From
    Valid To
    Active---Checked
    Can you please list what you maintained
    Regards
    Vinod

  • Creating Work Area in OO

    Hi,
    I have a table type, which uses Line Type of a structure.
    I want to declare a table for that and also a work area. I need to append entries in this table l_i_tab_ca_rbl_data.
    I declared the table as follows :-
    l_i_tab_ca_rbl_data TYPE standard TABLE OF cms_tab_am_cur_acc_rbl_data,
    and I tried to declare the Work area in the following ways :-
    ls_i_tab_ca_rbl_data like l_i_tab_ca_rbl_data,
    ls_i_tab_ca_rbl_data type cms_tab_am_cur_acc_rbl_data,
    ls_i_tab_ca_rbl_data type cms_str_am_cur_acc_rbl_data ("This is the line type used in the table type )
    In the first case, it says "ls_i_tab_ca_rbl_data  does not have a header line"
    It gives the error "ls_i_tab_ca_rbl_data cannot be converted to line type of l_i_tab_ca_rbl_data".
    Please suggest how I can declare a wrok area for this table type.
    Also since the error says that l_i_tab_ca_rbl_data is a line type does that mean it can hold only one record.
    Also is there any other way to append entries in that table l_i_tab_ca_rbl_data, apart from work areas.
    Please help.
    Note : I am working in a class-> method so am unable to declare tables with header line.
    Thanks in advance,
    Archana

    It's actually simple if yyou use dynamic tables and field symbols.
    In the program that calls  methods / attributes in the class
    define some field symbols
    for example
    FIELD-SYMBOLS :
      <fs1>           TYPE  ANY,
      <fs2>           TYPE  STANDARD TABLE,
      <field_catalog> TYPE STANDARD TABLE,
      <dyn_table>    TYPE  STANDARD TABLE,
      <orig_table>   TYPE  STANDARD TABLE,
      <dyn_field>,
      <dyn_wa>.
    in the class define data
    DATA:
    dy_table         TYPE REF TO data,
        dy_line          TYPE REF TO data,
    etc.
    field symbols work both INSIDE and OUTSIDE classes and are extremely useful for passing / receiving data. You have to define the field symbols in your main program however.
    METHOD create_dynamic_table.
    CALL METHOD cl_alv_table_create=>create_dynamic_table
        EXPORTING
             it_fieldcatalog = it_fldcat
          IMPORTING
             ep_table = dy_table.
    ENDMETHOD.
    CALL METHOD me->create_dynamic_table
        EXPORTING
          it_fldcat = it_fldcat
        IMPORTING
          dy_table        = dy_table.
         ASSIGN dy_table->* TO <dyn_table>.
    CREATE DATA dy_line LIKE LINE OF <dyn_table>.
    ASSIGN dy_line->* TO <dyn_wa>.
    ENDMETHOD.
    Then in your program (or class)  your data is in <dyn_table>.
    Use dynamic tables and dynamic field cats as these give HUGE flexibility and you can re-use code over and over again for different structures.
    The new RTTI  gives you any table structure whatsoever so you can make the whole thing completely general.
    That's one of the advantages of Classes and OO as opposed to older FMODS.
    Cheers
    jimbo

  • Error while creating work repository

    Hi all,
    I am facing problem while creating work repository in ODI.
    I have successfuly created master repository and also test connection comes out to be succesull for work repository.
    But while i click on OK it gives CREATION error stating
    No data found : \snps_login_security.xml(Access is Denied)
    Thanks and Regards,
    Priyanka

    Hi ,
    u r having Oracle DB......?
    You have the databases and ODI installed in the same machine.....?
    Have u chkd ur databse/schema rigts .....
    can u plz chk on this front .....as well as the user/pw ur using for ur connections.....
    Thanks
    Ananda

  • Error in creating work table

    Hello!
    Now I am fighting with a new issue with ODI 11.1.1.5. I executed an interface several times with no issues and during the next execution the interface produced the following error:
    ODI-1228: Task SrcSet0 (Loading) fails on the target SUNOPSIS_ENGINE connection MEMORY_ENGINE.
    Caused By: java.sql.SQLException: object name already exists: C$_0Accounts in statement [create table "C$_0Accounts"
         C1_PARENT     VARCHAR(80) NULL,
         C2_CHILD     VARCHAR(80) NULL,
         C3_DESCRIPTION     VARCHAR(80) NULL
         at org.hsqldb.jdbc.Util.sqlException(Unknown Source)
         at org.hsqldb.jdbc.JDBCPreparedStatement.fetchResult(Unknown Source)
         at org.hsqldb.jdbc.JDBCPreparedStatement.execute(Unknown Source)
         at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
         at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
         at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
         at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
         at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
         at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
         at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
         at java.lang.Thread.run(Thread.java:662)
    Caused by: org.hsqldb.HsqlException: object name already exists: C$_0Accounts
         at org.hsqldb.error.Error.error(Unknown Source)
         at org.hsqldb.SchemaObjectSet.checkAdd(Unknown Source)
         at org.hsqldb.SchemaManager.checkSchemaObjectNotExists(Unknown Source)
         at org.hsqldb.StatementSchema.setOrCheckObjectName(Unknown Source)
         at org.hsqldb.StatementSchema.getResult(Unknown Source)
         at org.hsqldb.StatementSchema.execute(Unknown Source)
         at org.hsqldb.Session.executeCompiledStatement(Unknown Source)
         at org.hsqldb.Session.execute(Unknown Source)
         ... 19 more
    Any hints on how to resolve it will be very highly appreciated!

    Hi, John!
    Thank you so much for your hint! This issue happens with the following dependency: 1) I run an interface and the interface stumbles at a given step with some error, 2) I run the same interface for the second time and it produces the error at the very first step that the work table already exists.
    If I exit ODI studio and then relaunch it, then the interface does not have the error of existing work table. But if the interface has some other error at some step and I run the interface for the second time, then again the error that the work table already exists is reproduced. So every time I want to get rid of this error, I have to exit and relaunch the ODI studio.
    Is there any solution that would not force me to relaunch the ODI studio every time I have this error?

  • Error in creating work repository in Postgres

    Hi ... I was trying to create a work repository in Postgres and my test connection was successful. However, when I hit the <ok> button I encountered this error.
    ERROR: you can only create unique index on the distribution column(s).
    Thanks in advance for any help ...

    Hello,
    Launch Topology Manager using the command line option -CONSOLE such as below.
    <ODI_HOME>/bin/topology.bat -CONSOLE
    A console window will appear.
    Redo the work repository creation and send the content of the console window when the error appears (the repository table being created should appear there).
    Best,
    -FX

  • Error creating work order for new notification - Related SyncBO not present

    Hi,
    We are working with MAM3.0 standard application.
    We age getting an  error while creating work order for a NEW notification.
    In this scenario both notification and corresponding work order are also not created.
    Here is the error for MAM30001 Sync BO in MEREP_MONI:_
    Reading inbox record (mobile ID=0000001444, seq, no.=29, rcd_cntr=1, data=TOP0001000000
    External format successfully converted to internal format: ldata=TOP0001000000000000000
    Related SyncBO MAM30_010 with Sync key 0000000028 is not present on the device.
    Return code 1 (DOWNLOADER)                                                   
       Here is the error for MAM30010 Sync BO in MEREP_MONI:_
    Return code from RFC BAPI Wrapper call:Order NEW does not exist
    Return code from RFC BAPI Wrapper call:The order/network type  is not defined
    Return code from RFC BAPI Wrapper call:Order NEW does not exist
    Return code 0 (UPDATE MEREP_506-STATUS)                                      
    Can any body please tell me what is the sollutions for this error
    your help in this regard is appreciable.
    Regards,
    Murthy

    Hi Murthy,
    II have no idea what patch level you are on. A while back we had similar issues with some clients. There are several patches around that area available. Perhaps you should have a look into patch 959732.
    Hope that helps.
    Regards,
    Oliver

  • Error when trying to copy a work area in Oracle designer

    In oracle designer,I tried to copy a work area by selecting.
    File-->>Change work area.
    Then from the "Work area" pop up window,I selected the new option.
    In the Create work area wizard i chose "Copy a work area" and gave the Name ,description and the work area to be copied.
    When i click the finish button,I am getting the following error.
    "CDR-01005: Workarea compilation failed: ORA-01422: exact fetch returns more than requested number of rows. "
    Please let me know how to copy a work area in Oracle designer.
    Thanks in advance.

    Note 277801.1
    Views Return Records From The Wastebasket.
    Possible Symptoms
    ~~~~~~~~~~~~~~~~~
    1) executing a SELECT FROM CI_... views return more rows than expected.
    2) SELECT ... INTO ... FROM CI_... views raises error
    ORA-1422: exact fetch returns more than requested number of rows.
    3) Deleting an object from the repository fails with the following errors:
    RME-00020: Internal API error -
    ORA-01422: exact fetch returns more than requested number of rows
    ORA-06512: at "<repos_owner>.JR_NAME", line 3680
    ORA-06512: at "<repos_owner>.JR_NAME", line 4138
    ORA-06512: at "<repos_owner>.JR_ERROR", line 193
    ORA-06512: at "<repos_owner>.SDD_TAB_D", line 961
    ORA-06510: PL/SQL: unhandled user-defined exception
    ORA-04088: error during execution of trigger '<repos_owner>.SDD_TAB_D'
    NB: the name of the trigger (SDD_TAB_D in the above example) will vary
    depending on the object type you are deleting
    4) Compilation of a Workarea fails with the following errors:
    CDR-01005: Workarea compilation failed:
    ORA-01422: exact fetch returns more than requested number of rows.
    Workaround
    ~~~~~~~~~~
    For symptoms 1 and 2, define the context of a workarea before selecting from
    the CI_... views:
    exec jr_context.set_workarea ('<Workarea Name>');
    For the other symptoms, the errors are caused by RDBMS bugs that were fixed
    in the last patch set releases of databases.
    We recommend that you upgrade to a version of the database that is certified
    with the release of Designer that you are using.
    See Note 60705.1 for details

  • How to create an EHS Work Area on Company Code level?

    Hi,
    Is it possible to create work area on company level?
    (In CBIH02 the EHS work area can only be created within a Plant)
    I had a look at the following transactions related to link a work area to Organization Management, I'm really
    confused and have no idea how to realize it.
    Path: EHS > Industrial Hygiene and Safety > Work Area > Link to Organizational Mangement
    PPSC - Create Structures
    PPSM - Edit Structures
    PPME - Edit Matrixes
    Help is much appreciated.
    Roy Derks

    Hi Roy,
    I doubt on Company Level. As work Area's standard hierarchy goes like that - Work Area -- Plant -- Location -- Production Process -- Activity -- Machine -- Task.
    I would revert back if I could get something.
    Regards,
    Akash

  • Work area or table not referenced statically in the program

    Hi Friends,
    When i make extended syntax check for my program, i am getting error as this work area or table not referenced statically in the program .
    How can i overcome that .
    Please give solution nfor this .
    Thanx.
    Title was edited by:
            Alvaro Tejada Galindo

    While Rich has already provided you the right solution, I think you are concerned about this error only because of your "Project Standards" - which says no EPC errors.
    So delete the work area or field from your data definitions if you think that it is not being used.
    If you think it being used dynamically put a comment of " #EC NEEDED next to it. The error will now be hidden.
    Regards,
    Srihari

Maybe you are looking for

  • Can I change from Embedded PL/SQL Gateway to Oracle HTTP Server/Apache?

    Hi everyone Can I change a running installation of Oracle 10.2.0 Application Express 3.2.1.00.10 to move away from the Embedded PL/SQL Gateway on to the Oracle HTTP Apache server? I'd like the change to be as transparent as possible to avoid an outag

  • Creating a new site has become more obscure....

    So, on one of our site collections, I needed to activate the publishing features so that some navigation mentions that were available in sp 2007 worked under the new sp 2010 ribbon. That seemed harmless enough. Today, however, a site admin contacted

  • BEx  Calulation

    I have created a new formula in my structure that will work like " ABS (revenue)/forecast " In the result, the report shows "Revenue/ forecast" , its not showing the absolute value of the revenue/firecast value .. is it a bug in SAP ? how can I get t

  • Many Problems with new iPod

    It all started out when I got my nice shiny new iPod. I installed the latest 64 bit version of iTunes and connected my new iPod. First thing iTunes told me was that the iPod was corrupt and needed to be restored. I thought no big deal. The iPod is ne

  • Metadata, keywords and collections

    This may be a dumb question but I would like to be sure. Is everything that I type in the metadata trough bridge and all the keywords that I assign to a file staying with that file/photo/video/photoshop etc. So if I give that file to someone else, he