Error in Data Column

Hi,
I have created Generic data Source based on ~Infoset Query and called the schdeule the data in BW... I am getting the error in the Column in the report.... without message.. it says errior and gives the grand total..
Can any had face same sort of issues please share..
Thanks

Question is not clear but let me try.
Are you telling in the report for key figures you are getting ERR ??
like 210ERR ??
This happens when the unit is not maintained for your key figure.You need to maintain the units properly.
If you dont want units you can create a new formula or CKF and use NODIM() to remove units.
Hope this helps.

Similar Messages

Data column (for posting period) converted to COMPARISON COLUMN

Hi all,
I use 'posting period'(derived from fiscal period/year) in the data column and assigned CHAR-posting period to a variable (the value is 1.2.3....12) in the planning level.
When I execute my layout, I got an error message: Data column 2 will be converted into a comparison column.
Diagnosis:
You have entered variable ZFIU004 in data column 2 and provided it with an offset. This results in values arising for variable ZFIU004, which are no longer within the selection, which was defined for the variable.
Can someone please advise me?

Hi,
What is the selection maintained for posting period on the level.
thanks

Error reading data from CLOB column into VARCHAR2 variable

Hi all,
Am hitting an issue retrieving data > 8K (minus 1) stored in a CLOB column into a VARCHAR2 variable in PL/SQL...
The "problem to be solved" here is storing DDL, in this case a "CREATE VIEW" statement, that is longer than 8K for later retrieval (and execution) using dynamic SQL. Given that the EXECUTE IMMEDIATE statement can take a VARCHAR2 variable (up to 32K(-1)), this should suffice for our needs, however, it seems that somewhere in the process of converting this VARCHAR2 text to a CLOB for storage, and then retrieving the CLOB and attempting to put it back into a VARCHAR2 variable, it is throwing a standard ORA-06502 exception ("PL/SQL: numeric or value error"). Consider the following code:
set serveroutput on
drop table test1;
create table test1(col1 CLOB);
declare
cursor c1 is select col1 from test1;
myvar VARCHAR2(32000);
begin
myvar := '';
for i in 1..8192 loop
myvar := myvar || 'a';
end loop;
INSERT INTO test1 (col1) VALUES (myvar);
for arec in c1 loop
begin
myvar := arec.col1;
dbms_output.put_line('Read data of length ' || length(myvar));
exception when others then
dbms_output.put_line('Error reading data: ' || sqlerrm);
end;
end loop;
end;
If you change the loop upper bound to 8191, all works fine. I'm guessing this might have something to do with the database character set -- we've recently converted our databases over to UTF-8, for Internationalizion support, and that seems to have changed underlying assumptions regarding character processing...?
As far as the dynamic SQL issue goes, we can probably use the DBMS_SQL interface instead, with it's EXECUTE procedure that takes a PL/SQL array of varchar2(32K) - the only issue there is reading the data from the CLOB column, and then breaking that data into an array but that doesn't seem insurmountable. But this same basic issue (when a 9K text block, let's say, turns into a >32K block after being CLOBberred) seems to comes up in other text-processing situations also, so any ideas for how to resolve would be much appreciated.
Thanks for any tips/hints/ideas...
Jim

For those curious about this, here's the word from Oracle support (courtesy of Metalinks):
RESEARCH
========
Test the issue for different DB version and different characterset.
--Testing the following PL/SQL blocks by using direct assignment method(myvar := arec.col1;) on
different database version and different characterset.
SQL>create table test1(col1 CLOB);
--Inserting four CLOB data into test1.
declare
myvar VARCHAR2(32767);
begin
myvar := RPAD('a',4000);
INSERT INTO test1 (col1) VALUES (myvar);
myvar := RPAD('a',8191);
INSERT INTO test1 (col1) VALUES (myvar);
myvar := RPAD('b',8192);
INSERT INTO test1 (col1) VALUES (myvar);
myvar := RPAD('c',32767);
INSERT INTO test1 (col1) VALUES (myvar);
commit;
end;
--Testing the direct assignment method.
declare
cursor c1 is select col1, length(col1) len1 from test1;
myvar VARCHAR2(32767);
begin
for arec in c1 loop
myvar := arec.col1;
--DBMS_LOB.READ(arec.col1, arec.len1, 1, myvar);
dbms_output.put_line('Read data of length: ' || length(myvar));
end loop;
end;
The following are the summary of the test results:
===================================
1. If the database characterset is WE8ISO8859P1, then the above direct assignment
method(myvar := arec.col1;) works for database version 9i/10g/11g without any
errors.
2. If the database characterset is UTF8 or AL32UTF8, then the above direct assignment method(myvar := arec.col1;) will generate the "ORA-06502:
PL/SQL: numeric or value error" when the length of the CLOB data is greater
than 8191(=8K-1). The same error can be reproduced across all database versions
9i/10g/11g.
3. Using DBMS_LOB.READ(arec.col1, arec.len1, 1, myvar) method to read CLOB data into a VARCHAR2 variable works for both WE8ISO8859P1 and UTF8
characterset and for all database versions.
So - it seems as I'd surmised, UTF8 changes the way VARCHAR2 and CLOB data is handled. Not too surprising, I suppose - may you all be lucky enough to be able to stay away from this sort of issue. But - the DBMS_LOB.READ workaround is certainly sufficient for the text processing situations we find ourselves in currently.
Cheers,
Jim C.

Getting this Error: There was an error with input column "FROM_DATE" (6356) on input "OLE DB Destination Input" (6100). The column status returned was: "The value could not be converted because of a potential loss of data.".

Hi,
I have a flat file with this kind of value - " 20140713 " . To take this value in DB Table I set the data type of this column in flat file manager - string [DT_STR] 50, But in destination table It is set as date [date] NULL
while process this file, I'm getting this error, that mention in subject line.
Please confirm, how to do that as I don't want to change the destination column type.

you need to add a derived column in SSIS with expressions as below
(DT_DATE)SUBSTRING([Column],1,4) + (DT_WSTR,30) "-" + SUBSTRING([Column],5,2) + (DT_WSTR,30) "-" + SUBSTRING([Column],7,2)
ANd map this new column to your tables date column
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Saving result from sp_executesql into a variable and using dynamic column name - getting error "Error converting data type varchar to numeric"

Im getting an error when running a procedure that includes this code.
I need to select from a dynamic column name and save the result in a variable, but seem to be having trouble with the values being fed to sp_executesql
DECLARE @retval AS DECIMAL(12,2)
DECLARE @MonthVal VARCHAR(20), @SpreadKeyVal INT
DECLARE @sqlcmd AS NVARCHAR(150)
DECLARE @paramdef NVARCHAR(150)
SET @MonthVal = 'Month' + CAST(@MonthNumber AS VARCHAR(2) );
SET @SpreadKeyVal = @SpreadKey; --CAST(@SpreadKey AS VARCHAR(10) );
SET @sqlcmd = N' SELECT @retvalout = @MonthVal FROM dbo.CourseSpread WHERE CourseSpreadId = @SpreadKeyVal';
SET @paramdef = N'@MonthVal VARCHAR(20), @SpreadKeyVal INT, @retvalout DECIMAL(12,2) OUTPUT'
--default
SET @retval = 0.0;
EXECUTE sys.sp_executesql @sqlcmd,@paramdef, @MonthVal = 'Month4',@SpreadKeyVal = 1, @retvalout = @retval OUTPUT;
SELECT @retval
DECLARE @return_value DECIMAL(12,2)
EXEC @return_value = [dbo].[GetSpreadValueByMonthNumber]
@SpreadKey = 1,
@MonthNumber = 4
SELECT 'Return Value' = @return_value
Msg 8114, Level 16, State 5, Line 1
Error converting data type varchar to numeric.

Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We need
to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. And you need to read and download the PDF for:
https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
>> I need to select from a dynamic column name and save the result in a variable, but seem to be having trouble with the values being fed to sp_executesql <<
This is so very, very wrong! A column is an attribute of an entity. The idea that you are so screwed up that you have no idea if you want
the shoe size, the phone number or something else at run time of this entity.
In Software Engineering we have a principle called cohesion that says a model should do one and only one task, have one and only one entry point, and one and only one exit point.
Hey, on a scale from 1 to 10, what color is your favorite letter of the alphabet? Yes, your mindset is that level of sillyity and absurdity.
Do you know that SQL is a declarative language? This family of languages does not use local variables!
Now think about “month_val” and what it means. A month is a temporal unit of measurement, so this is as silly as saying “liter_val” in your code. Why did you use “sp_” on a procedure? It has special meaning in T-SQL.
Think about how silly this is:
SET @month_val = 'Month' + CAST(@month_nbr AS VARCHAR(2));
We do not do display formatting in a query. This is a violation of at the tiered architecture principle. We have a presentation layer. But more than that, the INTERVAL temporal data type is a {year-month} and never just a month. This is fundamental.
We need to see the DDL so we can re-write this mess. Want to fix it or not?
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Error giving a default value to a date column in the attribute settings.

When im giving a default value to a date column in the attribute settings i get this error when im running my jsp page (bc4j web application):
Error Message: JBO-25009: Cannot create an object of type:oracle.jbo.domain.Date with value: 31-dic-2099
How can i fix that?
Thank u

The default date format for oracle.sql.DATE which oracle.jbo.domain.Date extends is "YYYY-MM-DD"

ViewObject (Date column) works fine in 9.0.3 but causes errors in 9.0.5

Good Morning,
I have generated entity/view objects, from the same table, for JDev9.0.3 and JDev9.0.5. The application runs fine under JDev9.0.3.
When I drag/drop a view onto the design panel within 9.0.5 and run its associated dataAction two unexpected thing occur.
1. The table displays 'no records found' in the browser. I am certain the table has thousand's of records.
2. When I refresh the browser (hold the ctrl key and click MS Explorers refresh button) I receive the following error:
oracle.jbo.domain.DataCreationException: JBO-25009: Cannot create an object of type:oracle.jbo.domain.Date with value:oracle.sql.TIMESTAMP@2228
I can reproduce this error on 'any' table which have date columns. Again, the same view displays fine under 9.0.3. Can this problem be reproduced on your end using 9.0.5? If so, there a work-around? If not, do you have any ideal on what would cause this? Is there a workaround or a patch?
Thank you

I am basically following the procedures described here:
http://otn.oracle.com/products/jdev/collateral/tutorials/9050/adfuix_tut.html
My Date column attributes are set as follows:
Entity Attribute Tab;
a. The name is DateCreated
b. The type is Date
c. Updateable is Always
d. Persistend and Queriable is checked.
Attribute Properties Tab:
Default values
Control Hints Tab:
a. Display Hint: Display
b. Format Type: Simple Date
c. Format: yyyy-MM-dd
d. Control Type: Default
e. Form Type: Detail
My business components were created from my
'Business Components Diagram'. I created the diagram using dnd from a table located under the 'Connections --> Database' pane.
I also have a StrutsPageFlow diagram. When I dnd a viewobject onto one of my "uix" pages, I do not see 'EL' binding syntax on any date columns. I can see this information within my other columns.
I understand the Emp table has a HireDate column. Are you able to display the 'HireDate' column on a uix page? If you are and were using the same build of JDeveloper, then I need to figure out what Im doing wrong. My first guess is the way 9.0.2/9.0.3 handled dates and the way 9.0.5 is handling dates is different.
Thanks

Odbc Driver error when using specific date column

I am receiving the this error:
Odbc driver returned an error (SQLExecDirectW).
Error DetailsError Codes: OPR4ONWY:U9IM8TAC:OI2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46036] Internal Assertion: Condition len <= desc->objectLength_, file ..\Oci8\Src\SQXDGOci8.cpp, line 614. (HY000)
It happens when I try to to set criteria on a specific date column or I do not set criteria at all. If I set date column 1 to greater than 4 or so months back the report returns, along with all the dates from date column 2. But if I then try to set date column 2 as the criteria, no matter if I just ask for data from a week until today, I receive this error. I tried changing the Server Stack size to 512, but that did not help. Anyone have an idea on this???

You seem to be using an ODBC connection with an Oracle database, is that correct? If so you should install the Oracle client and use the OCI driver instead and it is much faster and stable than ODBC.

Error when using filter on date column in interactive report

Hi,
I'm getting the following error when using the filter on a date column. None of the criteria in the filter list work. All give me the same error but when I use the filter on a column feature (in the search bar) and use ">" and "<" those work.
Can someone please help me????
" Settledate is in the last 2 years
ORA-30175: invalid type given for an argument ORA-02063: preceding line from MAINDATA "

I have a similar problem . I have an interactive report based on resultset stored in a collection; since all the columns of a collection are of string datatype, I convert the columns to appropriate datatypes before its returned to the user; everything works as desired except when I try to filter on a data column , I get a ORA-01858: a non-numeric character was found where a numeric was expected .
I turned on debug mode and am copying the output here , column c009 which is aliased to 'C' is the one that I am trying to apply the filter on
select
ROWID as apxws_row_pk,
"C001",
"C002",
"C003",
"C004",
"C005",
"C006",
"C007",
"C008",
"CHECKOUTTIMESTAMP",
"C010",
"C011",
"TO_NUMBER(C012)",
"TO_NUMBER(C013)",
"TO_NUMBER(C014)",
"C015",
"C016",
"C017",
"TO_NUMBER(C018)",
"C",
count(*) over () as apxws_row_cnt
from (
select * from (
Select c001,c002,c003,c004,c005,c006,c007,c008,to_date(c009,'dd-MON-yy HH24.MI') checkouttimestamp,
cast(to_date(c009,'dd-MON-yy HH24.MI') as timestamp) c,
--TO_TIMESTAMP(c009,'dd-MON-yy HH24.MI') c1 ,
trunc(to_date(c009,'dd-MON-yy HH24.MI')) checkoutdate,
c010,c011,to_number(c012),to_number(c013), to_number(c014),c015,c016,c017,to_number(c018) from apex_collections where collection_name = 'IR_BOOKSALES'
) r
where ("C" between systimestamp - ((1/24) :APXWS_EXPR_1) and systimestamp)*
) r where rownum <= to_number(:APXWS_MAX_ROW_CNT)
order by ROWID
0.04: IR binding: ":APXWS_EXPR_1"="APXWS_EXPR_1" value="1"
0.04: IR binding: ":APXWS_MAX_ROW_CNT"="APXWS_MAX_ROW_CNT" value="2000"
ORA-01858: a non-numeric character was found where a numeric was expected
I have tried to convert c009 to date, timestamp and timestamp with time zone datatypes ; they all return the same error ,but all 3 datatypes work fine with systimestamp when I run them in sqlplus. Any help would be appreciated.

Error changing data type to date in column containing blanks

I am pulling data from an OLAP cube into PowerPivot. My data set contains several date columns wich are formatted as YYYY-MM-DD string values. After successfully importing the data, I am trying to set the data type of these columns to date.
Apparently, when the column contains blank values, the conversion fails:
The following system error occurred: Type mismatch. Datatype conversion failed for [Table: 'SO fact table', Column: 'Shipping Date LastDateDate', Value: ''].
When the column contains no blanks, the conversion succeeds.
Would anyone have an idea for working around this issue ?
Is there some MDX magic that I could use in my query in order to cast blank dates to something that PowerPivot would accept to convert, or to make the conversion to the date format right at the source ?

Hello,
I did a quick test with data from Excel sheet formatted as text containing ISO date values with one blank value, in Power Pivot I then changed it to type "Date" and it works without an issue; so it must have an other reason:
You can try to use the
DAX function "DateValue" to convert the values
Olaf Helper
[ Blog] [ Xing] [ MVP]

MAPPING DEBBUG ERROR: ORA-02291(data column format)

I think the problem is the data format...
in csv files I have dd/mm/yyyy, and i set the mask in the flat file import like this dd/mm/yyyy, but when I debbug I receeive constraint violation parent key not found, the sonstraint is ok, how I must set the data column? and how I must set it in excel.
please someone help me, it's 5 days I have this problem and I can't make another think.
Thanks

Hi Marvin,
Was this issue resolved? If so, how did you fix it? I am receiving the same error with the *MVAL function.
Thanks,
Hitesh

Unable to load the following resource: Error: too many columns- form won't

Hi ..
Can you please suggest on the following error, which i am facing the issue while opening data form in Hyperion Planning 11.1.1.4 .
Unable to load the following resource: Error: too many columns- form won't
Regards,
Vasu

It is something around 256 if I am not mistaken, I dread to think what a form with 700 columns is like to work with.
Cheers
John
http://john-goodwin.blogspot.com/

How to load data into Planning/Essbase from multiple data column

Dear All,
I have a interface file which contains multiple data column as follows.
Year,Department,Account,Jan,Feb,Mar,Apr,May,Jun,Jul,Aug,Sep,Oct,Nov,Dec
FY10,Department1,Account1,1,2,3,4,5,6,7,8,9,10,11,12
FY10,Department2,Account1,1,2,3,4,5,6,7,8,9,10,11,12
FY10,Department3,Account1,1,2,3,4,5,6,7,8,9,10,11,12
I created a data rule to load these interface file.
I want to use ODI to upload this interface. I try to specify the rule name in ODI and run the interface.
But, it came out following errors.
2010-02-22 11:40:25,609 DEBUG [DwgCmdExecutionThread]: Error occured in sending record chunk...Cannot end dataload. Analytic Server Error(1003014): Unknown Member [FY09,032003,910201,99,0,0,0,0,0,0,0,0,0,0,0,0] in Data Load, [1] Records Completed
Any idea to fix the column, I sure the member name is correct as I can load data from data load rule correctly.
Thanks

Dear John,
I updated the data load rule delimter to "," and found different error message as follows.
'A910201.99','HSP_InputValue','HKDepart','No_WT','032003','NO_Lease','FY09','Actual','Final','Local','0','0','0','0','0','0','0','0','0','0','0','0','Cannot end dataload. Analytic Server Error(1003014): Unknown Member [0] in Data Load, [1] Records Completed'
It seems that the data load rule can recognize the some member except the figures of Jan to Dec..
thanks for your help

How can i change the Format of my DATE column?

I need to change the date format for a whole column. At present i can do MM-DD-YYYY. I need to change this this to DD-MMM-YYYY.
I know about the to_date function, i tried to apply it to change the format of my whole column by doing the following.....
CREATE TABLE "IT220_DATEHOLIDAY"
"DEPARTID" VarChar(2)NOT NULL ENABLE,
"HOLCODE" VARCHAR2(2)NOT NULL ENABLE,
"DEPARDATE" DATE,
to_date('DATE','DD-MMM-YYYY'), <<<change DATE column to DD-MMM-YYYY
CONSTRAINT "DATEHOLIDAY_PK" PRIMARY KEY ("DEPARTID") ENABLE
ORA-00902: invalid datatype <<<<This was the error message i received.
I am aware that the to_date function is supposed to be used to change strings into a certain format. I guess this means you cant do it with columns? Is there anyway i can format the whole column or do i have to do each string of data entered one by one?
Thanks in advance!

Hello Jay,
I'm not sure you hit the right forum, as this doesn't seem to be a problem with APEX.
Anyway:
You can't use that function on a table like that, and as you already suggested, the to_date-function expects a string value.
It seems you also have a misunderstanding of the basic datatypes in the database. DATE is such a datatype and is stored an internal format you don't need to care about. Each time your request the value, the database will give you a string representation according to either your locale or you give a certain formatting mask.
The same applies to insert or update operations: you hand in either a variable of type DATE or use a function like to_date to create an "object" of type date.
You may be interested in reading the documentation of the [url http://download.oracle.com/docs/cd/E11882_01/server.112/e16508/toc.htm]Oracle Database Concepts. The section concerning datatype DATE can be found here:
http://download.oracle.com/docs/cd/E11882_01/server.112/e16508/tablecls.htm#CBBGJHJC
An overview of formatting options can be found here:
http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/sql_elements004.htm#SQLRF00212
So to answer your question: You would format it as part of your insert operation, taking a string and convert it using to_date.
-Udo

Not able to save date column with custom date format. in OBIEE 11g

Hi,
I have migrated one report from OBIEE 10g to 11g. There is a date column with customized date format(i.e. Default format is 'dd-MMM-yyyy' and I have used 'MMM-yyyy').
But when I use this custom format and try to save the report in 11g its giving this below error.
''Catalog object privilege validation failed for user to path /shared/ALM BI/Finacial Results/History Income Statement Detail.
You do not currently have sufficient privileges to save a report or dashboard page that contains HTML markup.
This HTML might be present in column headings, table headings, text views, narrative views, the print header,
or the print footer and must be removed before saving.''
Please let me know what changes I need to do for this.
Regards,
Ambika Nanda.

Hi ,
privilage issues...check the security settings once..
Thanks,
Ananth

Error in Data Column

Similar Messages

Maybe you are looking for