Error in DB02
In DB02 ->Alerts ->Database Check, I have two error message:
Name..............................Number of message.....Description
MISSING_INDEX..............2...................................Index: SAPSR3./BIC/B0000406000KE # Table has no index
MISSING_STATISTICS....32.................................Table: SAPSR3./BIC/B0000414000 # Table or index has no optimizer statistics
What does it mean? What table is it (BIC/B0000406000KE and ./BIC/B0000414000)?
How can I sovle it?
hello,
if it is all green. then there must be any other problem. please go through the following links hope it will help you.
*Missing Index: Process chain Error*
Sometimes there might be missing indexes in the PW1 environment. This can be checked in transaction DBO2 (Missing Indexes). Sometimes it could be such that the DB statistics were run at a time while the cubes are being loaded and hence the indexes are missing. Hence the first step for such issues is to refresh the data base statistics as shown in the figure. Doing this, updates the database statistics. If this does not solve the issue, go the infocube 'Manage', Performance tab and select 'Repair Indexes (Immediately)'. After this the database statistics need to be updated again via DBO2.If the table for which the index is missing not an infocube, in such a case the index can be created as shown in the first diagram. Highlight the index and select 'Create in DB'.
Can be recreated via SAP_INFOCUBE_INDEXES_REPAIR
Some more info:
Reoccuring missing secondary indexes in BI systems
http://www.erphome.net/pdf/saezpdf/081saez.pdf
Similar Messages
-
Getting error in DB02 after checking Consistency check Unknown objects in A
Dear All,
I have getting error in DB02 after checking Consistency check.
Please find the details.
I have queries.
How to correct the Unknown objects in ABAP Dictionary and Optional index is also we have to create please suggest step by step process.
Missing in R/3 DDIC 1 11
Consistency check of 07.04.2009 10:14:24
-- Objects missing in the database
Primary indexes 0
Secondary indexes 0
Tables 0
Views 0
-- Unknown objects in ABAP Dictionary
| |-- DB tables 1
|-- DB indexes 11
|-- DB views 12
-- DB tables without unique index 1
-- Optional indexes
Too many indexes created 0
-- Indexes not created 145
Regards,Hi
Check this may help you
http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/e4ff3e65b66976e10000000a1553f6/content.htm
Regards
Uday -
Database check error on DB02-- Alert
Dear All,
We found the below errors on DB02 -->Alert .
E 22.12.2010 12:02:31 10 DBA MISSING_INDEX 1 Table: SAPSR3.ZBIMIS # Table has no index
W 22.12.2010 12:02:31 0 DBO ARCHIVE_TOO_OLD 1 Operation: 'Archive log backup' has not been run # Operation too old or has not been run in clean-up period
W 22.12.2010 12:02:31 0 DBO BACKUP_TOO_OLD 1 Operation: 'Complete database backup' has not been run # Operation too old or has not been run in clean-up period
W 22.12.2010 12:02:31 6 DBO OPERATION_TOO_OLD chk 1 Operation: 'chk' has not been run # Operation too old or has not been run in clean-up period
W 22.12.2010 12:02:31 6 DBO STATS_TOO_OLD 1 Operation: 'Update optimizer statistics' has not been run # Operation too old or has not been run in clean-up period
W 22.12.2010 12:02:31 6 ORA 00060 5 Time: 2008-11-07 21.41.35, line: ORA-00060: Deadlock detected. More info in file /oracle/IRP/saptrace/usertrace/irp_ora_606586.t
E 22.12.2010 12:02:31 6 ORA 00376 100 Time: 2008-09-26 17.34.39, line: ORA-00376: file 1 cannot be read at this time
E 22.12.2010 12:02:31 6 ORA 00470 2 Time: 2010-02-25 05.34.41, line: ORA-470 signalled during: ALTER DATABASE DISMOUNT...
E 22.12.2010 12:02:31 6 ORA 00471 3 Time: 2008-10-10 18.05.57, line: ORA-00471: DBWR process terminated with error
E 22.12.2010 12:02:31 6 ORA 00474 1 Time: 2010-03-10 04.47.53, line: ORA-00474: SMON process terminated with error
E 22.12.2010 12:02:31 6 ORA 00600 2 Time: 2010-02-12 11.41.38, line: ORA-00600: internal error code, arguments: [1433], [60], [], [], [], [], [], []
E 22.12.2010 12:02:31 6 ORA 01113 10 Time: 2008-11-28 18.38.28, line: ORA-1113 signalled during: ALTER DATABASE OPEN...
W 22.12.2010 12:02:31 6 ORA 01555 1 Time: 2010-09-08 10.01.09, line: ORA-01555 caused by SQL statement below (SQL ID: 6cbacdfn457j9, Query Duration=57100 sec, SCN:
E 22.12.2010 12:02:31 2 ORA 01652 4 Time: 2010-12-20 10.41.41, line: ORA-1652: unable to extend temp segment by 128 in tablespace PSAPTEMP
E 22.12.2010 12:02:31 6 ORA 01653 100 Time: 2010-12-09 16.17.30, line: ORA-1653: unable to extend table SAPSR3.BALDAT by 128 in tablespace PSAPSR3
E 22.12.2010 12:02:31 6 ORA 01691 20 Time: 2010-12-09 16.10.05, line: ORA-1691: unable to extend lobsegment SAPSR3.SYS_LOB0000072694C00007$$ by 128 in tablespace
E 22.12.2010 12:02:31 6 ORA 16038 100 Time: 2008-10-26 13.55.06, line: ORA-16038: log 4 sequence# 1472 cannot be archived
E 22.12.2010 12:02:31 6 ORA 19502 100 Time: 2008-10-26 13.55.06, line: ORA-19502: write error on file "/oracle/IRP/oraarch/IRParch1_1472_664127538.dbf", blockno 79873
E 22.12.2010 12:02:31 6 ORA 19504 1 Time: 2009-07-09 17.34.49, line: ORA-19504: failed to create file "/oracle/IRP/oraarch/IRParch1_14699_664127538.dbf"
E 22.12.2010 12:02:31 6 ORA 19510 11 Time: 2008-10-26 14.17.54, line: ORA-19510: failed to set size of 85896 blocks for file "/oracle/IRP/oraarch/IRParch1_1473_66412
E 22.12.2010 12:02:31 6 ORA 27044 1 Time: 2009-07-09 17.34.49, line: ORA-27044: unable to write the header block of file
E 22.12.2010 12:02:31 6 ORA 27063 100 Time: 2008-10-26 13.55.06, line: ORA-27063: number of bytes read/written is incorrect
E 22.12.2010 12:02:31 6 ORA 27072 2 Time: 2009-06-20 11.03.58, line: ORA-27072: File I/O error
W 22.12.2010 12:02:31 9 ORA Checkpoint not complete 100 Time: 2008-08-29 22.02.36, line: Checkpoint not complete
W 22.12.2010 12:02:31 10 PROF LOG_BUFFER 1 Value: 14238720 (>< 4096,512 KB) # Size of redo log buffer in bytes
W 22.12.2010 12:02:31 10 PROF OPTIMIZER_FEATURES_ENABLE 1 Value: 10.2.0.1 (set in parameter file) # Optimizer plan compatibility parameter
W 22.12.2010 12:02:31 10 PROF OPTIMIZER_INDEX_COST_ADJ 1 Value: 20 (set in parameter file) # Optimizer index cost adjustment
E 22.12.2010 12:02:31 10 PROF REPLICATION_DEPENDENCY_TRACKING 1 Value: TRUE (<> FALSE) # Tracking dependency for Replication parallel propagation
W 22.12.2010 12:02:31 10 PROF STATISTICS_LEVEL 1 Value: TYPICAL (set in parameter file) # Statistics level
W 16.12.2010 08:31:09 6 DBO LAST_ARCHIVE_FAILED 1 Operation: aeeuepco.cds, time: 2010-12-15 15.53.58 failed with rc = 5 # Last archive log backup failed with rc = 5
W 16.12.2010 08:31:09 6 DBO LAST_BACKUP_FAILED 1 Operation: beeuekuv.anf, time: 2010-12-15 15.05.33 failed with rc = 5 # Last complete database backup failed with rc = 5
W 13.12.2010 08:29:12 10 DBA TABLESPACE_FULL 1 Tablespace: PSAPSR3, value: 96.96% (> 95%) # Tablespace full
E 12.12.2010 00:22:33 10 DBA MISSING_STATISTICS 1 Table: SAPSR3.ZMATCOMP # Table or index has no optimizer statistics
Kindly adviseDear,
your first error -->MISSING_INDEX ,so create table index to help APAPER,
2& 3->ARCHIVE_TOO_OLD,your system online/offline redo log backup not take for long time so...
4-->DBO STATS_TOO_OLD ,throw db13 to run database/stats update job(daily seclude) ,
regard
vinod -
Runtime error in DB02 IMPORT_OBJECT_DESTROYED
Hi Guys,
When i call up Tx : DB02 and choose Space Statistics under Tablepace Tab, runtime error is occurring " IMPORT_OBJECT_DESTROYED".
The short dump mentions as :
Error analysis
Unable to import the dataset because it has an unexpected
format. It was
destroyed as a result of direct manipulation of the
IMPORT/EXPORT data by other means (for instance, explicit deletion of parts of the dataset using SQL instead of DELETE FROM DATABASE).
In this case, the records in the dataset do not appear in the
expected order, which is 0,1,2,3...
(sequence counter in field SRTF2).
The next record expected here is number 0,
but number 1 appears.
Information where termination occurred:
The termination occurred in the ABAP/4 program "RSORAT2M " in
"IMPORT_FROM_MONI_SAFE".
The main program was "RSORAT2M ".
The termination occurred in line 908
of the source code of program "RSORAT2M " (when calling the editor 9080).
The program "RSORAT2M " was started as a background job.
Any help is appreciated.
NarenHi,
Check the note [393658|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=393658]
For me it seems that the historical data is not gathered. If so, please schedule the job SAP_COLLECTOR_FOR_PERFMONITOR for each hour .
Regards,
Srihari -
Dump error in db02 CONNE_IMPORT_WRONG_COMP_TYPE
Dear All,
When use the t-code db02 and press refresh button for database + history check it give abap runtine error dump.
it gives this error as runtime error:
CONNE_IMPORT_WRONG_COMP_TYPE.
please guide me, it is happening both in Devlopment and well as in production server.
Thanks
BhaskarHi,
check Note 657981 - CONNE_IMPORT_WRONG_COMP_TYPE in DB02 for RSORAUD1
also check Note 997535 - DB02: Problems with History Data.
regards
kaushal -
Dblibrary version mismatch error in db02
Hi SAP Experts,
I have a problem with My MSSQL cluster system. i get an alerts in my db02 that
There are different versions of dbmssslib.dll in use
There are different versions of ODBC32.dll in use
There are different versions of sqlncli10.dll in use
I found only one file dbmssslib.dll at kernal directory of CI. I can check version, but i do not understand from where the system compares and says there is a version mismatch? any idea?
Thanks and Regards
SyamHi Vineeth,
Thanks for the direction. Our patch is SAP_BASIS 710. The note is valid for below SAP_BASIS 700 , sp15. I have allocated the point .
I am checking in all kernal directories for version of the dblibrary files mentioned. We have also traced that CI contains two kernal directories . One for Intel and other for AMD. CI has got intel processor but appservers got AMD processors.
Thanks and Regards
Syam -
Dears,
I am getting following error in DB02 in Missing index option.
Missing indexes. Check of 19.07.2008 07:04:31
Indexes missing in the database
Primary indexes 1
ZRECEIPTS-0
Secondary indexes 6
BSIS-ZCH
BSIS-ZGL
EKBE-M01
GLPCA-BL
MBEW-ZMK
ZCND-CD
Please suggest how to resolve this issue.
DeepakHi,
I created Indexes maually but in one index its showing:
Request: Create Index ZCND-CD (ANKITG/19.07.08/10:19)
Process: MSLDEV_1
sql:
CREATE UNIQUE INDEX "ZCND~CD" ON "ZCND"
("MANDT",
"STATS")
PCTFREE 10
INITRANS 002
TABLESPACE PSAPDS1
STORAGE (INITIAL 0000000016 K
NEXT 0000000016 K
MINEXTENTS 0000000001
MAXEXTENTS UNLIMITED
PCTINCREASE 0000
FREELISTS 001)
ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found
DDL time(___1): ........43 milliseconds
The SQL statement was not executed
Index could not be created completely in the database
Index ZCND-CD could not be created
Request for ZCND could not be executed
Please suggest.
Deepak -
Error while trying to add a SQL Script via DB02
Good Morning and happy Sysadmin day to everyone,
I have the following Problem regarding DB2 9.5
I'm trying to run a SQL Script via DB02 in an ERP 6.0 System.
I'm using DB02 -> Jobs -> SQL Script Maintenenace -> Add
Then there is a Textfield "Script Name". When i'm using the F4-Help I'm getting the following error Message:
List box value range for field DYN_SED-SCRIPT_NAME could not be created
Message no. DB6PM004
Any suggestions what might be the Error?
Thanks in Advance
MarcoAre you trying to create a new Model or trying to import a Model ?
-
Error while execting Tcodes ST04,ST03,DB12,DB02
Hi Experts,
I had installed QAS & DEV instances successfully on one windows host.Below are the syste details.
OS :- Windows 2003 64 bit Standard Edition
Database :- Oracle 10.2.0.2
SAP :- R/3 4.7 Enterprise Ext. 200 SR1
Support Pack :-
SAP_Basis 6.20 Level 41
SAP_APPL 470 Level 21
SAP_ABA 6.20 Level 41
I am facing problem while executing transactions related to database i.e st04,st03,db12,db02.
After executing this transactions I received followng dumps.
1) Runtime Errors DBIF_DSQL2_SQL_ERROR
Exception CX_SY_NATIVE_SQL_ERROR
Database error text........: "ORA-00904: "KEY": invalid identifier"
Triggering SQL statement...: "FETCH NEXT "
Internal call code.........: "DBDS/NEW DSQL"
2) Runtime Errors RAISE_EXCEPTION
Exception condition "DB_RELEASE_UNKNOWN" raised
Error analysis
A RAISE statement in the program "SAPLSORA" raised the exception
condition "DB_RELEASE_UNKNOWN".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
3)Runtime Errors BCD_ZERODIVIDE
Exception CX_SY_ZERODIVIDE
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_ZERODIVIDE', was neither
caught nor passed along using a RAISING clause, in the procedure
"SKOM_CT_PERF_BUF_REDO" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
In the current program "SAPLSKOM", an arithmetic operation ('DIVIDE',
'/', 'DIV', or 'MOD') with a type P operand attempted to divide
by 0.
4) Runtime Errors COMPUTE_BCD_OVERFLOW
Exception CX_SY_ARITHMETIC_OVERFLOW
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_ARITHMETIC_OVERFLOW',
was neither
caught nor passed along using a RAISING clause, in the procedure
"SKOM_CT_PERF_BUF_LIB" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
An overflow has been determined in the current arithmetical operation
containing operands of type P. Possible causes include:
1. The results field of type P is to small and the result does not fit
into it.
places.
2. The result or partial result has more than 31 decimal places.
Thanks,
SachinHi Markus,
I have seen the note#741119, it asks to apply pack SAPKB64004, but its says its valid for Release 640 only. My release is 640 currently:
Software Component Name SAP_BASIS
Software Component Release 620
Support Package Level 0041
Highest Imported Support Package SAPKB62041
Short Description of Software Component SAP Basis Component
Support Package type Basis Support Pkg.
My question is, can i apply the pack directly on release 620? The prequisite to this pack says, the release should be 640. This forum helped me a lot, hoping you guys will solve my this issue as well.
Regards. -
Refresh Runtime Error in TCODE DB02
Hello Experts!
Was just trying to refresh the statistics that I have for my DB Spaces in DB02, but I suddenly come up with this error. Can anyone tell me what this means and why this is suddenly happening (As I had no problems using this functionality just last week). Thanks!
ST22 Error Log:
Runtime Errors DBIF_DSQL2_SQL_ERROR
Exception CX_SY_NATIVE_SQL_ERROR
Occurred on 03/30/2009 at 11:11:51
SQL error "-727" occurred when executing EXEC SQL.
What happened?
The error occurred in the current database connection "DEFAULT".
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
An exception occurred. This exception will be dealt with in more detail
below. The exception, assigned to the class 'CX_SY_NATIVE_SQL_ERROR', was not
caught, which
led to a runtime error. The reason for this exception is:
How to correct the error
Database error text........: "INF-727: Invalid or NULL TBLspace number given to
dbinfo(dbspace)."
Triggering SQL statement...: "FETCH NEXT "
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_DSQL2_SQL_ERROR" CX_SY_NATIVE_SQL_ERRORC
"RSINFTD1 " or "RSINFTD1 "
"START-OF-SELECTION"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
SM21 Error Log:
BY2 Database error -727 at FET
BY0 > INF-727: Invalid or NULL TBLspace number given to
BY0 > dbinfo(dbspace).
R68 Perform rollback
AB0 Run-time error "DBIF_DSQL2_SQL_ERROR" occurred
AB1 > Short dump "090330 111151 gtbwspd 10002568 " generatedHi.
I already had this issue and I solved by this way:
My issue happened in the following SQL statement:
94 EXEC SQL.
SELECT MAX(A.NEXTSIZE)
96 FROM SYSTABLES A, SYSFRAGMENTS B
97 WHERE DBINFO('DBSPACE',B.PARTN) = :TS_CHECK-DBSNAME
98 AND A.PARTNUM = 0
99 AND A.TABID = B.TABID
100 INTO :MAXEXT
101 ENDEXEC.
1) Please run the following sql query:
select fragtype, tabid, partn from sysfragments where partn = 0
2) Figure out which table it is:
select tabname from systables where tabid =<tabid>
3) Check the indexes of that table with oncheck -cI.
4) If you found indexes DISABLED, then you should enable them again.
5) To solve the problem you can:
-enable dropped indexes:
set indexes,constraints for <table> enabled;
-rebuild the indexes
Afterwards this operation should be corrected.
I hope I could be helpful.
Thanks,
Walter Oliveira. -
Database connection error in Tx DB02
Hi All,
I am using ECC6.0 with Windows 2003 64bit and database is SQL Server 2005. In Development server Tx DB02, connected of database showing in Yellow colour. but system is working fine. When i click on DB Connection tab and test connection, the error is generate but database is defined herewith wrongly. Please check the link for clerification.
http://img651.imageshack.us/i/databaseconnectionerr ori.jpg/
SatishCHeck to make sure that your SAPOsCol service is running.
-
Hi,
We have migrated our test system from windows(ms sql) to linux(maxdb).
All our products data was there there were no issues with that system.
when i try to execute TX DB02 i get the following error message saying
Name and Server : DE5 - sgtr-s-devde5
DBMRFC Function : DBM_EXECUTE
Command : dbm_version
Error : DBM Error
Return Code : -16
Error Message : command timeout exceeded
The instance is not accessible for MaxDB CCMS.
The instance might not be correctly integrated.
Check the integration in transaction DB59.
You shoudl also perform the connection test there.
can any one please help me in solving this issue so that i can view the table spaces.
Thanks!
Vardhan.Hi Sahil,
I have checked the permissions of both the folders every thing is fine
here i paste the log file of knlmsg
</MSG>
</MSGL>
<MSGL _NO="883824" _PROCESS="25864" _THREAD="0x6597" _TASK="157" _TIME="2011-07-18 06:56:27.000">
<MSG _NO="1" _ID="12929" _COMP="MsgOutput" _TEXT="Task T157 started">
<MSG_ARGS
FILE="MsgOutputKnlDiag.cpp"
_LINE="407"
_TIME="2011-07-18 06:56:27.000"
_LABEL="TASKING "
/>
</MSG>
</MSGL>
<MSGL _NO="883825" _PROCESS="25864" _THREAD="0x6597" _TASK="157" _TIME="2011-07-18 06:56:27.000">
<MSG _NO="1" _ID="11007" _COMP="MsgOutput" _TEXT="wait for connection T157">
<MSG_ARGS
FILE="MsgOutputKnlDiag.cpp"
_LINE="407"
_TIME="2011-07-18 06:56:27.000"
_LABEL="COMMUNIC"
/>
</MSG>
</MSGL>
<MSGL _NO="883826" _PROCESS="25864" _THREAD="0x654B" _TIME="2011-07-18 06:56:27.000">
<MSG _NO="1" _ID="11561" _COMP="MsgOutput" _TEXT="Connecting T157 sgtr-s-devde5.highradius.com 30427">
<MSG_ARGS
FILE="MsgOutputKnlDiag.cpp"
_LINE="407"
_TIME="2011-07-18 06:56:27.000"
_LABEL="COMMUNIC"
/>
</MSG>
</MSGL>
<MSGL _NO="883827" _PROCESS="25864" _THREAD="0x6597" _TASK="157" _TIME="2011-07-18 06:56:27.000">
<MSG _NO="1" _ID="11561" _COMP="MsgOutput" _TEXT="Connected T157 sgtr-s-devde5.highradius.com 30427">
<MSG_ARGS
FILE="MsgOutputKnlDiag.cpp"
_LINE="407"
_TIME="2011-07-18 06:56:27.000"
_LABEL="COMMUNIC"
/>
</MSG>
</MSGL>
<MSGL _NO="883828" _PROCESS="25864" _THREAD="0x6597" _TASK="157" _TIME="2011-07-18 06:56:27.000">
<MSG _NO="1" _ID="11560" _COMP="MsgOutput" _TEXT="Releasing T157">
<MSG_ARGS
FILE="MsgOutputKnlDiag.cpp"
_LINE="407"
_TIME="2011-07-18 06:56:27.000"
_LABEL="COMMUNIC"
/>
</MSG>
</MSGL>
<MSGL _NO="883829" _PROCESS="25864" _THREAD="0x6597" _TASK="157" _TIME="2011-07-18 06:56:27.000">
<MSG _NO="1" _ID="12827" _COMP="MsgOutput" _TEXT="wait for connection T157">
<MSG_ARGS
FILE="MsgOutputKnlDiag.cpp"
_LINE="407"
_TIME="2011-07-18 06:56:27.000"
_LABEL="COMMUNIC"
/>
</MSG>
</MSGL>
Thanks!
Vardhan. -
DB02 Trx Error Msg After EhP5 Upgrade !!
Hi Experts,
I've successfully upgraded my ERP 6.0 to EhP5. When using DB02 transaction, I'm getting the error msg "ADBC SQL Error occured" ... "[IBM][CLI Driver][DB2] SAPR3S.DB2QDB02_SCHEMA IS AN UNDEFINED NAME"
Any hint how I can fix this issue Pls.
Rgds,
Sheikh Saggaf
Edited by: Sheikh Saggaf on Nov 20, 2011 5:31 PMHi,
Refer SAP Note 1236755 - DB2-z/OS: -204 DB2QWPT2P is an undefined name.
This note defines problem similar to yours and its respective resolution.
Regards,
Deepak Kori -
Database error SQL1224N for the trx DB02
Hi All,
When we excute the transaction DB02 we obtain the following DUMP
DBIF_DSQL2_SQL_ERROR:
============================================================
Database error text........: "[IBM][CLI Driver] SQL1224N A database
agent could
not be started to service a request, or was terminated as a result of a database system shutdown or a force command. SQLSTATE=55032#"
Triggering SQL statement...: "FETCH NEXT "
Internal call code.........: "[DBDS/NEW DSQL]"
============================================================
WE are on DB2 V 8.1 (put level 0709), z/os 1.8, AIX 5.3.5 and
DB2Connect V8.1 FixPak 15.
We have truncated and recreated the SYSIBM.TABLESPACESTATS and
SYSIBM.INDEXSPACESTATS in tablespace DSNRTSDB.DSNRTSTS (Real Time
Statistics). Now the db02 works fine.
Why is happened that?
Regards,
BobHello,
SQL1224N is a subsequent error of a problem on DB2 server side. You should check DB2 MSTR AS for any errors and run software EREP to get more details on the possible abend in DB2.
Regards,
Thomas -
In DB02 T-Code i am getting DB error(Message no. S10002)
Hi Friends,
In DB02 T-Code i am getting DB Error,and selected database options are empty ,i have tried to solve this issue but i could not,please help me on this.I am using Windows platform and Ms sql 2005 database
Thanks[http://rapidshare.com/files/399178125/Error_in_DB02_T-Code.docx.html]
Hi ,
I have attached the document in the http://rapidshare.com/files/399178125/Error_in_DB02_T-Code.docx.html of the missing database options and also the error message and we dont find any ABAP dump for this issue.
Thanks
Maybe you are looking for
-
Hi experts, i have to change some fields on Account Document before commited, i was trying to use a Substitution ( obbh ), by document position. I can change all fields' values except KOART field. I know this is a critical field, but is there a way t
-
Tween class - yoyo()
Hi I was wondering what the opposit function is of the yoyo() funtion. I now have a animation running from right to left using the tween class. Instead of running the animation at the end going backwardswith the yoyo() funtion (from left to right). I
-
I am using a C3-00. It is an older device, but I lost my other phone and am using this one now. I'm trying to set up my Gmail account. I have the latest software version. When I select 'Add account' in mail, I only get the options for 'Ovi by Nokia'
-
"applicati​on error" in LV8 when building an .exe .
Hi All I am trying to build an .exe using LabView 8. I can generate a preview, fine, I can see all my files and where they will be, however I click the build button to star building the application and the application starts build fine. I get messag
-
How to use string format in TextInput?
How to use string format in TextInput? Ex. HH:MM:SS when typing message appear in 12:34:56 form. N,NNN when typing message appear in 1,234,567 form.