Error in displaying the messages

Hi
Kindly give me some suggestions on this problem
I am trying to execute the File2File scenarion, when i execute the scenarion the source file gets picked up from the respective location but i am not getting the output file.
When i check in Adapter monitoring the source adapter gives the status the file processing with no errors but the target adapter says no messgae processing untill without the any errors(Flag is green).
When i check in the Sxmb_moni, tried to execute i am getting an messgae "No Input found"....when i try to open the Business system in the service tab it is not displaying any busniess system created.
Under the SXMB_MONI there is no message appearing and not even the business system which was created.
Kindly let me know how to procced.
regards
Nisar

Hi,
Just a wild guess...Just check properly once all the elements ...SLD...and IR...
Might be some element is not activated...
Then pursue again using SXMB_MONI.
Regards
Priyanka Bansal

Similar Messages

Error in displaying the message

Hi All,
I am working with a BDC to upload the data for Infotype 0195.The BDC was already developed and I am looking into the support issue of the object.
The BDC is working fine.When I am uploading new records its giving the correct message 'Record Created'.But when I am trying to upload the already existing data then also the same message is being displayed instead of the message 'Record Already Exists'.
When I am trying to insert the code using Read table..........I am missing the logic somewhere else.Ca anyone help me out in this.For ur convenience I am pasting the code below.
Thanks in Advance.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
          EXPORTING
            number = gw_p0195-pernr
          IMPORTING
            return = gw_return.
        IF gw_return-type NE 'E'.
          CALL FUNCTION 'HR_INFOTYPE_OPERATION'
            EXPORTING
              infty         = '0195'
              number        = gw_p0195-pernr
              validityend   = gw_p0195-endda
              validitybegin = gw_p0195-begda
              record        = gw_p0195
              operation     = 'INS'
              dialog_mode   = p_ctumod                      "Mod-01
              tclas         = 'A'
              nocommit      = ' '
            IMPORTING
              return        = gw_return.
          CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
            EXPORTING
              number = gw_p0195-pernr.
        ENDIF.
Append gw_p0195 to gi_p0195.
clear gw_p0195.
        IF gw_return IS NOT INITIAL.
          gw_log-msg_id = gw_return-id.
          gw_log-msg_num = gw_return-number.
          CONCATENATE gw_data_d-pernr gw_data_d-gcase INTO
          gw_log-msg_key SEPARATED BY '|'.
          gw_log-msg_typ = gw_return-type.
          gw_log-rec_no   = gv_count.
          gw_log-msg_txt = gw_return-message.
        ELSE.
READ TABLE gi_P0195 INTO gw_P0195 WITH KEY pernr = gw_data_d-pernr
                                         grnum = gw_p0194-grnum.
Check sy-subrc eq 0.
          gw_log-msg_id = 'CUST'.
          gw_log-msg_num = '000'.
          CONCATENATE gw_data_d-pernr gw_p0195-grnum INTO
          gw_log-msg_key SEPARATED BY '|'.
If gw_p0195-grnum is not initial.
          gw_log-msg_typ = 'I'.
          gw_log-rec_no   = gv_count.
          gw_log-msg_txt = 'Record Already Exists'(t04).
endif.
          gw_log-msg_id = 'CUST'.
          gw_log-msg_num = '000'.
          CONCATENATE gw_data_d-pernr gw_data_d-gcase INTO
          gw_log-msg_key SEPARATED BY '|'.
          gw_log-msg_typ = 'S'.
          gw_log-rec_no   = gv_count.
          gw_log-msg_txt = 'Record Created'(t02).
        ENDIF.
      ELSE.
        gw_log-msg_id = 'CUST'.
        gw_log-msg_num = 'XXX'.
        CONCATENATE gw_data_d-pernr gw_data_d-gcase INTO
        gw_log-msg_key SEPARATED BY '|'.
        gw_log-msg_typ = 'E'.
        gw_log-rec_no   = gv_count.
       gw_log-msg_txt = 'Case does not exists for Personnel No '(t03).
      ENDIF.

I tried using sy-subrc ne 0 as mentioned below.But still its not working.Can anyone help me out.
   READ TABLE gi_P0195 INTO gw_P0195 WITH KEY grnum = gw_p0194-grnum.
        IF sy-subrc ne 0.
          gw_log-msg_id = 'CUST'.
          gw_log-msg_num = '000'.
          CONCATENATE gw_data_d-pernr gw_data_d-gcase INTO
          gw_log-msg_key SEPARATED BY '|'.
          gw_log-msg_typ = 'S'.
          gw_log-rec_no   = gv_count.
          gw_log-msg_txt = 'Record Already exists'(t04).
         gw_log-msg_txt = 'Record Created'(t02).
         else.
*Changes end by deepthi
          gw_log-msg_id = 'CUST'.
          gw_log-msg_num = '000'.
          CONCATENATE gw_data_d-pernr gw_data_d-gcase INTO
          gw_log-msg_key SEPARATED BY '|'.
          gw_log-msg_typ = 'S'.
          gw_log-rec_no   = gv_count.
          gw_log-msg_txt = 'Record Created'(t02).
         gw_log-msg_txt = 'Record Already exists'(t04).
        ENDIF.
        ENDIF.

Error: No authorization to display the message

Hello
Users are getting error : No authorization to display the message,
when they are trying to view the content of the message.
When checked in the error logs, I see teh below log:
Message: Failed (javax.management.MBeanPermission,*,DISPLAY)java.lang.reflect.InvocationTargetException
Category: com.sap.security.core.role.PermissionData
Location: com.sap.security.core.role.PermissionData.get(ClassLoader)
Application: sap.com/tclmitsamcouinwalocalnavigation~wd
Can you please advice , as what actions has to be added to user.

Where do you get this error? Basically user is not having proper credentials to view the message. Talk to Basis team.

I downloaded a trial of photoshop. It runs for a minute or so, then a message displays saying that photoshop has stopped. No error codes, just the message. I have exhausted the "try this" stuff that I can find. Any other ideas would be appreciated.

I downloaded a trial of photoshop. It runs for a minute or so, then a message displays saying that photoshop has stopped. No error codes, just the message. I have exhausted the "try this" stuff that I can find. Any other ideas would be appreciated. I would also like to know what some alternative applications might be. This trial does not give me confidence in Adobe's product.

I saw a similar question deeper into the forum right after I posted. I followed the fix steps and it took care of the problem.
Thanks for getting back to me. I am good to go.

Need to display the messages in a view which has the pop up on it

Hello all,
I have a view(View 1) in which if i click a button a pop up is being displayed.
Now on the pop up(which has view 2 of window 2) i have a button(Ok) and if i click it then based on a condition i need to close the pop up and then display the message in the message area of View 1.
Now if i click the button on the Pop up then it is being closed and the message is not being displayed on view 2.
I think the message is being displayed on the pop up and is being closed after that.
How can i display my message on View 1.
Any ideas...Please help
Thanks in advance,
Shravan

Hi Shravan,
Create Message area in view1.
and also give VIEW name wile displaying error message and try.
*   report message
CALL METHOD lo_message_manager->REPORT_ERROR_MESSAGE
    EXPORTING
      MESSAGE_TEXT              =
*      PARAMS                    =
*      MSG_USER_DATA             =
*      IS_PERMANENT              = ABAP_FALSE
*      SCOPE_PERMANENT_MSG       = CO_MSG_SCOPE_CONTROLLER
      VIEW                      =   VIEW1 .
Cheers,
Kris.

How to display the message along with a value using BBP_CHECK_BADI

Hi Gurus,
I need to display a message dynamically when the user create's a shopping cart. I am using Check_badi for this. i.e., I need to display the buyer number and amount left for him dynamically. I am storing both of them in variables and don't know how to display the messages laong with some message " the amount left for <XXXXXX> is <$$$$$$$$>". Can you help me out.
Thanks,
Neelima

Hi,
you can use the function module 'BBP_PD_MSG_ADD'. This is the function module normally used for the displaying the error messages in SRM.
See wether you can use already available error messages , use the transaction SE91 , and the message class being BBP_PD

How to display the Message Pool Messages in CE 7.2

Hi Experts,
Please let me know how to display the Message Pool Messages in CE 7.2.
I have tried with reportContextAttributeMessage, but it is deprecated in CE 7.2.
Please do the needful.Its Urgent.
Thanks & Regards,
SatheshKumar R

Hi Sathesh,
Do the following steps:
1.) After creating a component, under it you will see Message Pools. Double click and open it.
2).Click "Add Message" and add a new message. (Give a message key, type of message (either warning, error etc ) and message text).
3). Save the metadata.
4). Raise this message where all you want by using following code(For example, on click of a button) :
      IWDMessageManager msgnr = wdThis.wdGetAPI().getComponent().getMessageManager();
      msgnr.reportMessage(IMessage<component name>.<message>,null,true);
For example, I have a component name TestAppComp and under message pool I have message called message1, then use lik this:
        IWDMessageManager msgnr = wdThis.wdGetAPI().getComponent().getMessageManager();
        msgnr.reportMessage(IMessageTestAppComp.MESSAGE1,null,true);
Reply me if you any doubt.
Regards,
Jithin

How sxmb_moni is displaying the messages

Hi,
I want to know how sxmb_moni is displaying the error information.
when messages are listed and we select one error message.If we click error_information button it displays a pop up with detailed errors.
Can some one please tell me from where it retrieves the messages. is it from any data base table.
I have debugged standard program with out any clue

Hi samir,
you are right as i am calling the cl_proxy_fault and passing the exception class name.
But my requirement is can i know where this error messgae will get stored.
I feel tht unless it stores in database table it will not display the message in sxmb_moni.
( Here i am talking about additional error information )
Please correct if i am wrong
Edited by: ch_ravi_sap on Feb 17, 2012 12:43 PM

ABAP Run time error when display the Customs Export declarations

Hi,
I'm receiving ABAP Run time error when display the Customs Exp. Declarations Under SAP Customs Processing -> Customs Processing - Import / Export -> Monitoring.
Error messaging point to Function Module - /SAPSLL/CUHD_LOAD_SELECTION.
While debugging we found that Primary Key of the below structures are not the same
lt_corpar                              type      /sapsll/corpar_t
lt_corpar_ht      type      /sapsll/corpar_k02_ht
Does anyone has the SAP Notes or solution to this issue other than changing the structures manually. I'm not sure about the impact if i change manually
Error message short details
Termination occurred in the ABAP program "/SAPSLL/SAPLCUHD_SELECTION" - in
     "/SAPSLL/CUHD_LOAD_SELECTION".
    The main program was "/SAPSLL/CULO_DISPLAY_CUS_EXP ".
    In the source code you have the termination point in line 144
    of the (Include) program "/SAPSLL/LCUHD_SELECTIONU01".
We are on GTS Release 8.0 and Support Package SAPK-80014INSAPSLL (Support pack level 14).
Regards,
Pradeep Maddi

Hi,
I have implemented SAP Note 1531799, but it hasn't resolved the current issue.
For Our GTS instance, there are 2 Feeder Systems (ECC) attached, but document transfer in one of the system has not been activated. Both having the same partner functions ( We copied the sandbox into 2 different instances for different business Testings and now these 2 instances attached to GTS for testing). These feeder systems have different Logical system names and Logical system groups.
Recently i have implemented SAP Corrections manually for one the issue, Please see below thread for the detail information
Proforma Invoice not transferred to GTS
After implementing the corrections, i have created Pro-forma invoice in ECC system. When i tried to display, i'm facing the ABAP Dump issues.
Error details
Runtime Errors         ITAB_DUPLICATE_KEY
ABAP Program           /SAPSLL/SAPLCUHD_SELECTION
Application Component SLL-LEG
You tried to insert an entry into table "\FUNCTION=/SAPSLL/CUHD_LOAD_SELECTION\DATA=LT_CORPAR_HT". However, updating the unique table key "PRIMARY_KEY" resulted in a duplicate entry. The key concerned may be either the primary key or a secondary key.
Regards,
Pradeep

Displaying the message in output of BDC program.

Hi,
I have developed the BDC program for running the MMPV and MMRV transaction code in that in output want to display the message that for which company code posting is done or some error is occurring. Below shown message is populate in when standard transaction code MP is execute.
AL O G
Mode: Check and close period
Client: 140
Period entered (month/year): 11 2007
Incorrect period in control recd. of CoCd 1306; no conversion The current period (month/year) of the control record is 11 2007
Period closing complete; log issued.
E N D
I want like this message to be display in output of the program, currently I am using the function module FORMAT_MESSAGE. It is displaying the message which is appearing on status bar only. I am not able to capture the message which is shown above.
In this problem can any body can guide me

I am using the Call transaction method.I use the internal table of 'bdcmsgcoll' in the program but I am not able to get the message in internal table other than the message which is appearing on the on the status bar, the message which I shown in mail it's an log message which is coming after running the standard MMPV transaction code.
below shown is the code which I written.
DATA:   BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE.
      messages of call transaction
DATA:   MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
         chetan
       W_MESSTAB LIKE BDCMSGCOLL .
      error session opened (' ' or 'X')
DATA:   E_GROUP_OPENED.
      message texts
DATA:   session LIKE apqi-groupid VALUE 'X', " VALUE 'GAN'.
        GROUP TYPE APQI-GROUPID,
        USER TYPE APQI-USERID value 'SY-UNAME',
        KEEP TYPE APQI-QERASE,
        HOLDDATE TYPE APQI-STARTDATE,
        SMALLLOG(1) TYPE C VALUE ' ',
        CTUMODE LIKE CTU_PARAMS-DISMODE VALUE 'N',
        CUPDATE LIKE CTU_PARAMS-UPDMODE VALUE 'L', "'L'
        E_GROUP(12) TYPE C,
        E_USER TYPE SY-UNAME,
        E_KEEP(12) TYPE C,
        E_HDATE TYPE SY-DATUM.
FORM BDC_TRANSACTION USING TCODE.
DATA: L_MSTRING(480).
DATA: L_SUBRC LIKE SY-SUBRC.
DATA: L_Message(255) TYPE C .
REFRESH MESSTAB.
CALL TRANSACTION TCODE USING BDCDATA
                   MODE   CTUMODE
                   UPDATE CUPDATE
                   MESSAGES INTO MESSTAB.
L_SUBRC = SY-SUBRC.
IF SMALLLOG <> 'X'.
    LOOP AT MESSTAB.
      CALL FUNCTION 'FORMAT_MESSAGE'
        EXPORTING
          ID        = MESSTAB-MSGID
          LANG      = sy-langu
          NO        = MESSTAB-MSGNR
          V1        = MESSTAB-MSGV1
          V2        = MESSTAB-MSGV2
          V3        = MESSTAB-MSGV3
          V4        = MESSTAB-MSGV4
        IMPORTING
          MSG       = L_MESSAGE
        EXCEPTIONS
          NOT_FOUND = 1
          OTHERS    = 2.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4. "'-D'
      ENDIF.
      wa_tab-v_message = l_message.
    ENDLOOP.
ENDIF.
REFRESH BDCDATA.
ENDFORM.                    "BDC_TRANSACTION
FORM   mmpv_tcode .
SELECT bukrs lfgja lfmon
INTO table t_tab
FROM marv
WHERE bukrs IN s_bukrs AND
        lfgja IN s_lfgja AND
        lfmon IN s_lfmon.
IF SY-SUBRC <> 0.
    MESSAGE 'NO TABLE ENTRY FOUND FOR MMPV' TYPE 'I'.
    Leave list-processing.
    v_check = '1'.
ENDIF.
MMPV Program execution of all the company codes using loop.
LOOP AT t_tab INTO wa_tab.
    perform bdc_dynpro      using 'RMMMPERI' '1000'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'I_LFGJA'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ONLI'.
    perform bdc_field       using 'I_VBUKR'
                                  wa_tab-bukrs.
    perform bdc_field       using 'I_LFMON'
                                  wa_tab-lfmon.
    perform bdc_field       using 'I_LFGJA'
                                  wa_tab-lfgja.
    IF R_XCOMP = 'X'.
      perform bdc_field       using 'I_XCOMP'
                                    'X'.
    ENDIF.
    IF R_XINCO ='X'.
      perform bdc_field       using 'I_XINCO'
                                  'X'.
    ENDIF.
    IF R_XMOVE = 'X'.
      perform bdc_field       using 'I_XMOVE'
                                    'X'.
    ENDIF.
    IF R_XNEGQ = 'X'.
      perform bdc_field       using 'I_XNEGQ'
                                  'X'.
    ENDIF.
    IF R_XNEGV = 'X'.
      perform bdc_field       using 'I_XNEGV'
                                  'X'.
    ENDIF.
    perform bdc_dynpro      using 'SAPMSSY0' '0120'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BABA'.
    perform bdc_dynpro      using 'RMMMPERI' '1000'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EE'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'I_VBUKR'.
    perform bdc_transaction using 'MMPV'.
    wa_tab2-v_code = wa_tab-bukrs.
    wa_tab2-v_fyear = wa_tab-lfgja.
    wa_tab2-v_period = wa_tab-lfmon + 1.
    wa_tab2-v_message1 = wa_tab-v_message.
    APPEND wa_tab2 to t_tab2.
    clear wa_tab2.
ENDLOOP.
ENDFORM.                    " mmpv_tcode
I want that log message is to be displayed in the output.
Currently I am getting the output like this.
Report for posting MM period
         Company Code        Financial year                Period open for posting       Message
I want the message should e display under 'message' coloum.
         1306                2007                          12

HT4061 iTunes will not open when my iPhone 4S is attached to my Mac Book Pro. iTunes will start up but as soon as my iPhone appears in the list of devices the program then quits and displays the message 'iTune Quit Unexpectedly'? Can anybody help?

The Problem/s
1. I am unable to sync my iPhone 4S with my Mac Book Pro, either by cable, wifi or bluetooth
2. iTunes will initiall open and briefly identifies the iPhone in the Device section in iTunes.
3. When iTunes starts to read the iPhone (displaying the spinning wheel), it immediately then quits and
4. Opens a 'dialogue box' which displays the message "iTunes Quit Unexpectedly"
5 The dialoge box offers the following button options to:-
'Show Details'
The 'Show Details' button will open and display a list of the 'Problem Details and System Configeration'. To the average user the information is useless, as one doesn't know what to look for to solve the problem. This is a long and detailed report (too long to include in this message), which includes information such as:-
Crashed Thread: 20
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00000000000006f0
'OK'
The 'Ok' button simply quits and closes the dialogue box
'Reopen'
The 'Reopen' button will again reopen iTunes, briefly showing that it is trying to read the iPhone in the Devices section, but then returns again to display the same dialogue box.
Other Information
1. iTunes will still start normally once the USB cable is removed from the Mac book Pro, but crashes again once the USB cable is reattached to the computer
Any advice or help offered would be greatly appreciated.
Sincerely
Rob
Message was edited by: Robmanrico

Hi there anaqeed,
I would recommend taking a look at the troubleshooting steps found in the article below.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W.

How can i display the message

public class Userdefined extends Exception {
          Userdefined(String sparam){
          System.out.println(sparam);
          Userdefined(){
     private static int acno[]={100,105};
     private static double bal[]={100.00,200.00};
     public static void main(String args[]) {
          try{
          for(int i=0;i<2;i++)
               System.out.println("ACCCCNO------>"+acno[i]+"BAl------>"+bal);
               if(bal[i]<150.00)
          Userdefined udexp=new Userdefined("bal less");
          throw udexp;
          catch(Userdefined e){
               System.out.println("--->"+e);
How can i display the message "less amt" using my parmeterized constructor.

VinayTK wrote:
How can i display the message "less amt" using my parmeterized constructor.Erm ... what? You can't --- at least not with the stuff you've got there.
A properly formed question, with some idea of what you're trying to accomplish would be a huuuuge help.
Winston
BTW: Congratulations. At my age, 'first's in computing are rare; but it's definitely the first time I've seen an Exception class with a main() method.
Edited by: YoungWinston on Sep 1, 2009 9:46 AM

Using FF to access my AOL emails I get "There was an error while loading the message. Please try again later." Access is OK via Chrome, IE & AOL's own desktop.

"There was an error while loading the message. Please try again later." is a recent (3/4 days) error message I get when accessing my AOL emails. I can access the page and move them between states but cannot open them to read. Chrome, IE and AOL's own desktop open emails OK & can access them from the wife's PC using my AOL details. Have cleaned the history tab of everything in FF, have also removed it with add/rem progs and reinstalled - still I get the above message.
PC - W7 Pro 64 bit, 16GB RAM etc.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

<b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>

Getting Err : An error occurred in the message processing program.

Hi, Im wrking with Smartforms.
I have assigned output type LD00 ,with driver prgrm name and Smf name.
after that executing with VL03N , its giving error .
Output could not be issued
Message no. VL086
Diagnosis
An error occurred in the message processing program.
Procedure
Contact your system administrator.
...Actually i have orginal prgrm (zsmf_Orginal) there i had to do some modifications , so after copying that same form into another form(zsmf_Duplicate), i made some changes there, both form are executing in T code SMARTFORMS, but while testing with VL03N , its showing above mentioned err.
Plz have eye on it.
<removed by moderator>
Regards
vivek.
Edited by: vivekd358 on Jul 10, 2010 7:35 AM
Edited by: Thomas Zloch on Jul 12, 2010 11:35 AM

closed

Ok so I cant open my Itunes due to Windows Error 2 and the message says to uninstall and re-install Itunes but I'm pretty sure that would wipe the library right? Is there any way to fix the problem and keep my library?

Ok so I cant open my Itunes due to Windows Error 2 and the message says to uninstall and re-install Itunes but I'm pretty sure that would wipe the library right? Is there any way to fix the problem and keep my library?

Hi neffn!
I have an article for you that can help you go through that process of uninstalling and reinstalling iTunes. If you have Windows 7, you will want to see this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
and if you are using Windows XP, you will want to reference this article:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/ht1925
Note that, as it says in those articles:
iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes. While it is highly unlikely that you will lose any contents of your iTunes Library when following these steps, it is always a good idea to ensure that your iTunes library is backed up. If you're unsure how to backup, see iTunes: Back up your iTunes library by copying to an external hard drive.
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Error in displaying the messages

Similar Messages

Maybe you are looking for