Error in edit formula of a logical column in report

Hi All,
I'm getting the below error when I click ok in 'Edit Formula for a logical column in Criteria of Report.
Formula syntax is invalid.
Assertion failure: !sFormula.empty() at line 998 of C:\ADE\aime_bi\bifndn\analytics_web\main/project/webreport/reportquery.cpp
Could anybody help me out in this?
Thanks in adv.

Hi,
did u included any case condition over there..kinly check the syntax and correct it.
Thanks
Deva

Similar Messages

Two physical logical source formulas for on logical column

I have two fact tables :
1. W_SERVICE_REQ_F(opened_dt_wid, assigned_dt_wid, closed_dt_wid, QUEUE_WID, SERVICE_REQ_WID): grain is one row per service request
2. W_SERVICE_REQ_DAY_A(DATE_WID, QUEUE_WID, NUM_OPENED, NUM_CLOSED, num_assigned)
The goal is to answer NUM_OPENED, NUM_CLOSED per queue in a day and be able to drill-down to those service requests.
Physical model:
Common_Date.row_wid = W_SERVICE_REQ_F (Opened_Dt).opened_dt_wid
Common_Date.row_wid = W_SERVICE_REQ_F (Closed_Dt).closed_dt_wid
Common_Date.row_wid = W_SERVICE_REQ_DAY_A.DATE_WID
Queue_d.row_wid = W_SERVICE_REQ_F.QUEUE_WID
Queue._drow_wid = W_SERVICE_REQ_DAY_A.QUEUE_WID
Service_req_d.row_wid = W_SERVICE_REQ_F.SERVICE_REQ_WID. (there is no join between Queue_d and Service_req_d)
BMM Fact and LTSs:
I have W_SERVICE_REQ_DAY_A, W_SERVICE_REQ_F (Opened_Dt), W_SERVICE_REQ_F (Closed_Dt) as LTSs of "Fact - Service Request" in that order.
BMM Fact logical columns (measures):
# Closed
# Opened
Question:
I want to configure each of the above logical column with two physical columns of different aggregate forumlas. (to ensure queries that dont need service req number hit a table) (similar to http://www.gerardnico.com/wiki/dat/obiee/fragmentationlevel_based).
SUM(W_SERVICE_REQ_DAY_A.NUM_CLOSED)
COUNT("W_SERVICE_REQ_F (Closed_Dt)".SERVICE_REQ_WID)
Can someone help in configuring one logical column with two physical column sources with different aggregate formulas?
This is what I tried:
In # Opened Properites->Data Type, mapped it to both W_SERVICE_REQ_F (Closed_Dt).ROW_WID and W_SERVICE_REQ_DAY_A.NUM_CLOSED
In # Opened Properties->Aggregation tab, selected 'Default aggregation rule' as Count Distinct. In the bottom, Logical table sources override as follows:
W_SERVICE_REQ_DAY_A : SUM("Fact - Service Request"."# Closed")
W_SERVICE_REQ_F : COUNT("Fact - Service Request"."# Closed")
Should it be done in a different way?
PS: OBIEE 10.1.3.4.
added OBIEE version: Feb 3, 2012 4:40 PM

I have two fact tables :
1. W_SERVICE_REQ_F(opened_dt_wid, assigned_dt_wid, closed_dt_wid, QUEUE_WID, SERVICE_REQ_WID): grain is one row per service request
2. W_SERVICE_REQ_DAY_A(DATE_WID, QUEUE_WID, NUM_OPENED, NUM_CLOSED, num_assigned)
The goal is to answer NUM_OPENED, NUM_CLOSED per queue in a day and be able to drill-down to those service requests.
Physical model:
Common_Date.row_wid = W_SERVICE_REQ_F (Opened_Dt).opened_dt_wid
Common_Date.row_wid = W_SERVICE_REQ_F (Closed_Dt).closed_dt_wid
Common_Date.row_wid = W_SERVICE_REQ_DAY_A.DATE_WID
Queue_d.row_wid = W_SERVICE_REQ_F.QUEUE_WID
Queue._drow_wid = W_SERVICE_REQ_DAY_A.QUEUE_WID
Service_req_d.row_wid = W_SERVICE_REQ_F.SERVICE_REQ_WID. (there is no join between Queue_d and Service_req_d)
BMM Fact and LTSs:
I have W_SERVICE_REQ_DAY_A, W_SERVICE_REQ_F (Opened_Dt), W_SERVICE_REQ_F (Closed_Dt) as LTSs of "Fact - Service Request" in that order.
BMM Fact logical columns (measures):
# Closed
# Opened
Question:
I want to configure each of the above logical column with two physical columns of different aggregate forumlas. (to ensure queries that dont need service req number hit a table) (similar to http://www.gerardnico.com/wiki/dat/obiee/fragmentationlevel_based).
SUM(W_SERVICE_REQ_DAY_A.NUM_CLOSED)
COUNT("W_SERVICE_REQ_F (Closed_Dt)".SERVICE_REQ_WID)
Can someone help in configuring one logical column with two physical column sources with different aggregate formulas?
This is what I tried:
In # Opened Properites->Data Type, mapped it to both W_SERVICE_REQ_F (Closed_Dt).ROW_WID and W_SERVICE_REQ_DAY_A.NUM_CLOSED
In # Opened Properties->Aggregation tab, selected 'Default aggregation rule' as Count Distinct. In the bottom, Logical table sources override as follows:
W_SERVICE_REQ_DAY_A : SUM("Fact - Service Request"."# Closed")
W_SERVICE_REQ_F : COUNT("Fact - Service Request"."# Closed")
Should it be done in a different way?
PS: OBIEE 10.1.3.4.
added OBIEE version: Feb 3, 2012 4:40 PM

Logical Column for calculation

Hi guru,
My requirement is we have to display report with Total count of Opportunities , Count new Oppty ( which are created with in 30days from today ) Count Old Opptys ( which are created more than 30days ago and Overdue ( which closed date is > current Date).
For this requirement I had created one logical column and I am getting error when ever I am using Timestampdiff.
Could you please let me know how can I create these 3 logical columns in Meta Data.
I am rally appreciate for your help.

Here is what you need to do:
1. Create a Session Variable in your RPD
2. Check the "Enable any user to set the value" checkbox in the Session Variable properties
3. In your dashboard prompt, select"Request Variable" in the Set Variable section
4. Enter the name of your Session Variable in the box that appears
5. Now you can reference the session variable in the formula of your logical column. Syntax: VALUEOF(NQ_SESSION.YOUR_SESSION_VARIABLE)
Note: You cannot reference Presentation Variables in the RPD
-Dave

Problem creating new sites. The formula refers to a column that does not exist

Good morning,
I have a problem creating new sites in my development environment. We have a template which works properly when we create new sites with it. However, when we add one new content type in the site created and save it as a new template, we can't create new sites
with this template. The error log is that there are one problem in one column [The formula refers to a column that does not exist. Check the formula for spelling mistakes or change the non-existing column to an existing column].
I have opened the wsp template with visual studio but I can´t discover what column is the problem because the log only refers to the feature (ListInstances).
Anybody knows how to find my problematic column?
The error is:
Feature Activation: Threw an exception, attempting to roll back. Feature 'plantilla Llave en Mano 20141222 v2ListInstances' (ID: '6c61a3bf-3c51-4064-958b-d154729233e7'). Exception: Microsoft.SharePoint.SPException: La fórmula hace referencia a una
columna que no existe. Compruebe que la fórmula no tiene errores ortográficos o cambie la columna que no existe por otra que exista. ---> System.Runtime.InteropServices.COMException (0x81020057): La fórmula hace referencia a una columna que no existe. Compruebe
que la fórmula no tiene errores ortográficos o cambie la columna que no existe por otra que exista. at Microsoft.SharePoint.Library.SPRequestInternalClass.UpdateField(String bstrUrl, String bstrListName, String bstrXML) at Microsoft.SharePoint.Library.SPRequest.UpdateField(String
bstrUrl, String bstrListName, String bstrXML) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionListInstances(SPFeaturePropertyCollection props, SPSite site,
SPWeb web, Boolean fForce) at Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionElements(SPFeaturePropertyCollection props, SPWebApplication webapp, SPSite site, SPWeb web, SPFeatureActivateFlags activateFlags, Boolean
fForce) at Microsoft.SharePoint.SPFeature.Activate(SPSite siteParent, SPWeb webParent, SPFeaturePropertyCollection props, SPFeatureActivateFlags activateFlags, Boolean fForce)
Thanks in advance

Hi Enrique,
According to your description, after added a content type into the new site and save the site as a template, there is an issue when creating another new with the newly
site template.
Based on the error message “The formula refers to a column that does not exist…”, seems that it would be an issue of a Calculated column in the content type you added,
please go through all the Calculated column in that content type to see if the formulas all work well.
Feel free to reply if there any progress.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Logical column error!!

In my obiee admin tool, i have an rpd media i am trying to create a logical column with following expressions..
"MEDIA"."Media Facts"."Margin" * 1000
and it is throwing an error as Invalid Expression.
What could be the reason behind this??
cud somebody explain???
Edited by: Mahis on Nov 25, 2010 1:43 PM

the datatype is decimal.
i tried doing it but its not working!!!
"MEDIA"."Media Facts"."Margin" * 1000
i tried doing it in the expression builder window. i am able to do it there but when i close it and logical column window appears it says invalid expression

OBIEE Error in Logical column

Hi,
I want to use dynamic variable and filter the dates. I am creating new logical column in BMM using the below case statement. I am getting the error.Please suggest me for this issue.
CASE statement:
CASE WHEN VALUEOF(CURRENT_MONTH_FNC_STG) = '08 2010' THEN
"FNC_STG"."A_FNC_INVOICES_T"."INVOICE_CREATION_DATE" BETWEEN ('08/01/2010 12:00:00 AM') AND ('08/05/2010 12:00:00 AM')
END
--Here CURRENT_MONTH_FNC_STG is dynamic variable....
Error:
[nQSError: 27002] Near <BETWEEN>: Syntax error [nQSError: 26012] .
Thank U

Hi...
if avg sales should be calculated to current month always.. then why don't you apply external filter ..
i hope you are having time dimension columns like: year and month which is holding values like 2010, 2009.. etc, and 1,2,3,4.. etc..
If then,
apply this filter..
Year = Current_Date
and
MonthNumber = Month(Current_Date)
you can't include those 2 r.h.s values directly..
click on filter option of year column then > Advance > convert this filter to SQL.

Derived Logical Column throws an error

Hello
I get the 46036 error from Answers when I add a field that I created in the BMM of the RPD. We are on OBIEE 10.3.4.2. I added a logical column to a table and applied a filter for a particular age band. I can check the change in without any errors but when I use that field with that expression I get the nQSError.
*[nQSError: 46036] Internal Assertion Condition pExpr->IsValueExpr(), file*
Ahsan/Naveen, any ideas on this? You guys have been always helpful with my questions.
Thanks,
Dan

Not sure if this helps but found a few things online on this..may just require a resave or re-import of the specific report (http://tipsonobiee.blogspot.com/2009/06/error-nqserror-46036-internal-assertion.html). If you are on Solaris 64 there is also a bug associated with this. "[nQSError 46036] Internal Assertion Error" After Upgrading to OBIEE 10.1.3.3.2 [ID 566463.1] suggesting to change the following parameter:
A workaround is to make only off line changes.
The bug states the following:
"The solution was to set the following in NQSConfig.INI
SERVER_THREAD_STACK_SIZE = 1024 KB"
This is not the same exact OBIEE version. Try these 2 suggestions and let us know how it goes.

YTD Actual and Budget Formula in Logical column

Hello,
Im trying to replicate a report from Oracle EBS into OBIEE.
I have to create logical columns for YTD Actual , YTD Budget,Current month actual, Current Month Budget using GL_BALANCES table. The formula currently im using is,
YTD Actual:
CASE WHEN GL_BALANCES.ACTUAL_FLAG = 'A' THEN (GL_BALANCES.PERIOD_NET_DR - GL_BALANCES.PERIOD_NET_CR)+ (GL_BALANCES.BEGIN_BALANCE_DR - GL_BALANCES.BEGIN_BALANCE_CR) ELSE 0 END
YTD Budget :
CASE WHEN .GL_BALANCES.ACTUAL_FLAG = 'B' THEN GL_BALANCES.PERIOD_NET_DR - .GL_BALANCES.PERIOD_NET_CR + (.GL_BALANCES.BEGIN_BALANCE_DR - GL_BALANCES.BEGIN_BALANCE_CR) ELSE 0 END
Current Month actual :
TODATE(GL_BALANCES."YTD Actual", "Time Dim"."Month")
Current Month Budget :
TODATE(GL_BALANCES."YTD Budget", "Time Dim"."Month")
Please let me know, if my calculations are right.
Thanks

Hi,
I have only one KF and after closing the month, I would load actuals to the Budget KF itself.
Right now this coulmn is a formula with below:
( 1 <= 'Last Actual' ) * 'Jan / Actual' + ( 1 > 'Last Actual' ) * 'Jan / &0T_VERS&'
And the column heading is "January Act/Budget"
At the moment it is confusing for users to know which figures are Actuals and which are Budget.
Thanks
Priya

Aggregation tab disabled for fx logical columns

Hello, I am new to OBIEE. Can somebody please help me understand the folowing -
Query - While defining formula column in BMM whenver we use logical column as source why Aggregation Rule tab gets disable?
How can i apply aggregation rule for such columns at RPD. These columns are recognised by icon fx.
Please find attached screenshot to help understand my question.
[https://picasaweb.google.com/105903262683032369187/OBIEE?authkey=Gv1sRgCPW2qu2x8eKdjgE]
Any help is greatly appreciated.
Thanks
Edited by: 930542 on Jun 22, 2012 10:03 PM

Click on LTS of Table - Column Mapping - Select the logical column - click on expression - Put your logic here. You will get Aggregation rule is enalbed for the column.
Why ? -- Reason could be nested aggregation is not allowed. Aggregation on the normal column applied during query generation at run time. If you use that Agg.Measure to derive another Agg.measure server could not recognize it during runtime.

How do I edit formulas at once

So I find this very frustrating and have not found a solution ( I'm hoping there is one to make my life easier and more efficient ); i am trying to edit formulas and am having to do it one by one. I have about 50 formulas or more, that are based upon columns in a stored procedure, and i need to change them to another stored procedure that has exact same columns. However, the find and replace will not work on formulas just on text.
For example:
Current
If (procA.needscellphone) = 1 then true else false
Need
   If (procB.needscellphone) = 1 then true else false
Yes both stored procedures have been added to the report
Is there anyway to change all these formulas at once? Having to manually edit them one by one is tedious and seems to be quite archaic for a program like Crystal. I hope someone has a way for me to do this in such a way that will significantly reduce my time.
thank you.

Hi Doug,
Use RAS to get the formula collection and the .Clone to copy it, make the change to the text and then use the .Modify to apply the change.
Something like this:
btnReportObjects.Text = "";
int flcnt = 0;
#region do not delete
////do not delete - this works
////rptClientDoc.DataDefController.FormulaFieldController.Remove(resultField);
//CrystalDecisions.ReportAppServer.ObjectFactory.ObjectFactory objFactory = new CrystalDecisions.ReportAppServer.ObjectFactory.ObjectFactory();
//CrystalDecisions.ReportAppServer.DataDefModel.FormulaField Formula = (CrystalDecisions.ReportAppServer.DataDefModel.FormulaField)objFactory.CreateObject("CrystalReports.FormulaField");
//Formula.Type = CrystalDecisions.ReportAppServer.DataDefModel.CrFieldValueTypeEnum.crFieldValueTypeStringField;
//Formula.Syntax = CrystalDecisions.ReportAppServer.DataDefModel.CrFormulaSyntaxEnum.crFormulaSyntaxCrystal;
//Formula.Text = @"whilereadingrecords; ""A"""; // "hello Ludek = 1"; // resultField.Text; // "n=3"; {Customer.Customer Credit ID} + 1 @"whilereadingrecords; ""A"""
//Formula.Name = "TestDon"; // "TestDon"; // resultField.Name; //"testformula";
//String FormulaMessage = rptClientDoc.DataDefController.FormulaFieldController.Check(Formula);
//if (FormulaMessage == null)
//    rptClientDoc.DataDefController.FormulaFieldController.Add(Formula);
//else
//    btnReportObjects.Text += "There are errors in the formula: " + FormulaMessage.ToString() + "\n";
////do not delete - this works
#endregion do not delete
//rptClientDoc.SaveAs("don2.rpt", @"D:\Atest\CrystalTest_3501213_2013", 0);
btnCount.Text = rptClientDoc.DataDefController.DataDefinition.FormulaFields.Count.ToString();
foreach (FormulaField resultField in rptClientDoc.DataDefController.DataDefinition.FormulaFields)
    textBox1 = resultField.LongName.ToString();
    btnReportObjects.Text += textBox1;
    btnReportObjects.AppendText(" : Used: " + resultField.UseCount.ToString() + " times'End' \n");
    ++flcnt;
    btnCount.Text = flcnt.ToString();
    String FormulaMessage = rptClientDoc.DataDefController.FormulaFieldController.Check(resultField);
    if (FormulaMessage != null)
        btnReportObjects.Text += FormulaMessage.ToString() + "\n";
Don

Error in Dimension formula to find the average price

Hi all,
I have tried a dimension formula to find the average price of Product.
if the product is a parent level member then average price should be the average of the list price,other wise it should be the list price itself.
IIF([PRODUCT].CURRENTMEMBER.PROPERTIES("CALC")="N",[KEYFIGURES].[LISTPRICE],AVG(DESCENDANTS([PRODUCT].CURRENTMEMBER,[KEYFIGURES].[LISTPRICE],LEAVES)))
While i tried the same i received some strange error , i don know whether its having some dependency on the Customer dimension. since K0030101 is a memebr belonging to CUSTOMER dimension.
MDX statement error:"Value K0030101 for characteristic /CPMB/U6D7SXT un"
I'm not sure whether its an error with the formula i created or any dependancy issue or whether this scenario is possible using dimension formulas or not.
Thanks in advance .
Anila Mohan

Hi everyone!
We are using BPC 7.5 NW SP08 and we've had the same error message while adding a formula to the Account dimension:
'MDX statement error: "Value 1 for characteristic /CPMB/S9D7Q23 un".
We then checked in BW for /CPMB/S9D7Q23 and found out that it was the Product dimension.
The solution for the issue was quite interesting. I had seen in another post that sometimes CALC property was not correctly determined for SP08. The solution proposed was to edit dimension members, clear ParentH1 column, process dimension, re-edit, paste back ParentH1 values and process dimension again. This corrected CALC property problem.
It also worked for my case. After doing it to Product dimension I tried again to set the formula in Account dimension and it worked!!
Hope this helps.
Regards,
Luigi Laporte

SQL Error: ORA-12899: value too large for column

Hi,
I'm trying to understand the above error. It occurs when we are migrating data from one oracle database to another:
Error report:
SQL Error: ORA-12899: value too large for column "USER_XYZ"."TAB_XYZ"."COL_XYZ" (actual: 10, maximum: 8)
12899. 00000 - "value too large for column %s (actual: %s, maximum: %s)"
*Cause:    An attempt was made to insert or update a column with a value
which is too wide for the width of the destination column.
The name of the column is given, along with the actual width
of the value, and the maximum allowed width of the column.
Note that widths are reported in characters if character length
semantics are in effect for the column, otherwise widths are
reported in bytes.
*Action:   Examine the SQL statement for correctness. Check source
and destination column data types.
Either make the destination column wider, or use a subset
of the source column (i.e. use substring).
The source database runs - Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
The target database runs - Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
The source and target table are identical and the column definitions are exactly the same. The column we get the error on is of CHAR(8). To migrate the data we use either a dblink or oracle datapump, both result in the same error. The data in the column is a fixed length string of 8 characters.
To resolve the error the column "COL_XYZ" gets widened by:
alter table TAB_XYZ modify (COL_XYZ varchar2(10));
-alter table TAB_XYZ succeeded.
We now move the data from the source into the target table without problem and then run:
select max(length(COL_XYZ)) from TAB_XYZ;
-8
So the maximal string length for this column is 8 characters. To reduce the column width back to its original 8, we then run:
alter table TAB_XYZ modify (COL_XYZ varchar2(8));
-Error report:
SQL Error: ORA-01441: cannot decrease column length because some value is too big
01441. 00000 - "cannot decrease column length because some value is too big"
*Cause:
*Action:
So we leave the column width at 10, but the curious thing is - once we have the data in the target table, we can then truncate the same table at source (ie. get rid of all the data) and move the data back in the original table (with COL_XYZ set at CHAR(8)) - without any issue.
My guess the error has something to do with the storage on the target database, but I would like to understand why. If anybody has an idea or suggestion what to look for - much appreciated.
Cheers.

843217 wrote:
Note that widths are reported in characters if character length
semantics are in effect for the column, otherwise widths are
reported in bytes.You are looking at character lengths vs byte lengths.
The data in the column is a fixed length string of 8 characters.
select max(length(COL_XYZ)) from TAB_XYZ;
-8
So the maximal string length for this column is 8 characters. To reduce the column width back to its original 8, we then run:
alter table TAB_XYZ modify (COL_XYZ varchar2(8));varchar2(8 byte) or varchar2(8 char)?
Use SQL Reference for datatype specification, length function, etc.
For more info, reference {forum:id=50} forum on the topic. And of course, the Globalization support guide.

XML Parsing Error: no element found Line Number 1, Column 1:

Hi All,
I have deployed EAR on my standalone server using JDEV 11.1.1.6.0. I am able to get the WSRP portlet producer page on
http://<server>:7001/contextRoot. But when i try to click on any of the WSDL URL it gives me "XML Parsing Error: no element found Line Number 1, Column 1:"
and from IE it gives me: XML document must have a top level element. Error processing resource
there can be a issue with the WSRPContainer.jar file. So i have remove it from my deployment profile, EAR and lib/classpath files.
Can you please suggest a workaround.
Regards,
ND
Edited by: ND on Dec 4, 2012 9:57 PM

Hi All,
this error normally comes when the WLS domain is not not properly created. if you get some exception for ./provesecurity.sh file while creating the domain, then the XML error comes.
I did not went into the depth but figured out a workaround: restart the VM/hosted box and then create the domain, remember to use diff port name while creating it from the domain creation script.
Regards,
ND

I am getting error "ORA-12899: value too large for column".

I am getting error "ORA-12899: value too large for column" after upgrading to 10.2.0.4.0
Field is updating only through trigger with hard coded value.
This happens randomly not everytime.
select * from v$version
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE     10.2.0.4.0     Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Table Structure
desc customer
Name Null? Type
CTRY_CODE NOT NULL CHAR(3 Byte)
CO_CODE NOT NULL CHAR(3 Byte)
CUST_NBR NOT NULL NUMBER(10)
CUST_NAME CHAR(40 Byte)
RECORD_STATUS CHAR(1 Byte)
Trigger on the table
CREATE OR REPLACE TRIGGER CUST_INSUPD
BEFORE INSERT OR UPDATE
ON CUSTOMER FOR EACH ROW
BEGIN
IF INSERTING THEN
:NEW.RECORD_STATUS := 'I';
ELSIF UPDATING THEN
:NEW.RECORD_STATUS := 'U';
END IF;
END;
ERROR at line 1:
ORA-01001: invalid cursor
ORA-06512: at "UPDATE_CUSTOMER", line 1320
ORA-12899: value too large for column "CUSTOMER"."RECORD_STATUS" (actual: 3,
maximum: 1)
ORA-06512: at line 1
Edited by: user4211491 on Nov 25, 2009 9:30 PM
Edited by: user4211491 on Nov 25, 2009 9:32 PM

SQL> create table customer(
2 CTRY_CODE CHAR(3 Byte) not null,
3 CO_CODE CHAR(3 Byte) not null,
4 CUST_NBR NUMBER(10) not null,
5 CUST_NAME CHAR(40 Byte) ,
6 RECORD_STATUS CHAR(1 Byte)
7 );
Table created.
SQL> CREATE OR REPLACE TRIGGER CUST_INSUPD
2 BEFORE INSERT OR UPDATE
3 ON CUSTOMER FOR EACH ROW
4 BEGIN
5 IF INSERTING THEN
6 :NEW.RECORD_STATUS := 'I';
7 ELSIF UPDATING THEN
8 :NEW.RECORD_STATUS := 'U';
9 END IF;
10 END;
11 /
Trigger created.
SQL> insert into customer(CTRY_CODE,CO_CODE,CUST_NBR,CUST_NAME,RECORD_STATUS)
2                values('12','13','1','Mahesh Kaila','UPD');
              values('12','13','1','Mahesh Kaila','UPD')
ERROR at line 2:
ORA-12899: value too large for column "HPVPPM"."CUSTOMER"."RECORD_STATUS"
(actual: 3, maximum: 1)
SQL> insert into customer(CTRY_CODE,CO_CODE,CUST_NBR,CUST_NAME)
2                values('12','13','1','Mahesh Kaila');
1 row created.
SQL> set linesize 200
SQL> select * from customer;
CTR CO_   CUST_NBR CUST_NAME                                R
12 13           1 Mahesh Kaila                             I
SQL> update customer set cust_name='tst';
1 row updated.
SQL> select * from customer;
CTR CO_   CUST_NBR CUST_NAME                                R
12 13           1 tst                                      Urecheck your code once again..somewhere you are using record_status column for insertion or updation.
Ravi Kumar

How To Create Logical column For Lastyear To Till Date

Hi All,
I Have to calculate Lastyear to Till Date for Logical Column.
Ex:I have Time Dime and Fact column and Dimension columns.
jan 2011 to oct 2012.
Please Let me know.
Thanks,
Abhi

Looks like you are not reading my messages
Since you are doing on logical columns getting this error.
Try this using physical columns then count from aggregate tab
CASE WHEN "Oracle Data Warehouse"."Catalog"."dbo"."Fact_W_SRVREQ_F_Open_Date"."OPEN_DT_WID" > 20110101 THEN "Oracle Data Warehouse"."Catalog"."dbo"."Fact_W_SRVREQ_F_Open_Date"."SR_WID" END
The same you can go with your variable
Or else the same can do by duplicating the existing Fact - CRM - Service Request"."# of SRs" and just add above code.
or just use the below you dont use sum since already aggregation is happend for # of SRs
CASE WHEN "Core"."Dim - Date"."Year" = VALUEOf("Warehouse Refresh Date Last Year"."CURRENT_CALENDAR_YEAR_LAST_YEAR") AND "Core"."Dim - Date"."Date" < VALUEOF("Warehouse Refresh Date Last Year"."LAST_REFRESH_DATE_LAST_YEAR") THEN "Core"."Fact - CRM - Service Request"."# of SRs" END
Hope this works, mark as correct

Error in edit formula of a logical column in report

Similar Messages

Maybe you are looking for