Error in Fill Index

Hi All,
I got this error today for Fill Index, after that I have tried Creating and filling Index, but no luck  as the status not changed after creating the Indexes.
I thought this is the error between the HANA and BWA server.
Can someone enlighted more as i am new user for BWA and HANA both.
Thanks in Adavance for your  time.
Thanks
Suruchi Kapoor

Hi Suruchi Kapoor,
Please see if the following note helps you.
1682904 - Termination of BWA indexing jobs with BIA error 2116
BR
Prabhith

Similar Messages

  • Error in creating index on text BFILE

    Hi,
    I have put data into a table using SQL* Loader. The BFILE exist (I've tested it with a procedure). I've no errors during text indexing but when a look into the view ctx_user_index_errors, I have the following :
    DRG-11101: failed to open file \drgit3
    So, my index doesn't work.
    Any ideas ?

    ORACLE_HOME must be set. Otherwise ctxhx.exe used during indexing won4t work.
    null

  • Error while creating index on  ep 6.0 9 sr1   (trex 6.1).

    Hell o all,
        I am getting following error while creating index on  ep 6.0 9 sr1   (trex 6.1).
    Index could not be created; creating index failed: general configuration error (Errorcode 2030)
    can any on ehelp.
    thanks and regards
    Rajendra

    Hi,
    We are running TREX 6.1.09.00 on EP6.0.9.0.0 and KMC6.0.9.0.0.
    We are experiencing the same problems, even after changing the value in the .ini file as specified in NOTE 766197.
    After doing changes, I restarted the server after doing the changes.
    Alessandro, have you got any ideas for fixing this?
    Message was edited by: Bjorn Bjornstad

  • Error while filling the set up table for 2LIS_11_VAITM

    Dear Experts,
    i am facing an error while filling the set up table for 2LIS_11_VAITM in the source system.
    The error was "Company code for sales org 9000 does not exist (document 1326)".
    when i checked the document in the Header table VBAK,company code was blank for the document .
    Company code was there in the selections for the setup table.
    The error means that company code should be maintained for the sales document as per my knolwedge.i think document was not created properly in the source system.
    Could you please help me out to over come the problem.
    Regards,
    Sunil...

    in the selection screen for filling the setup table, there is a parameter No. tolerated faulty documents
    you'll have to enter at least '1' here in your case
    it might be that there are other erronuous records, in that case it will crash again, and you'll have to increase the value for this parameter
    (under "normal" circumstances, all documents in the source should be correct... but apparently it's possible to circumvent this)

  • Error while filling setup tables for 2lis_13_vahdr

    Dear friends,
    I am getting below Error while filling setup tables for 2lis_13_vahdr.
    More faulty documents found than the tolerated 0000000000
    Message no. M2222
    Can any one guide me how to address this issue.
    Thanks and Regards
    Nithya

    Hello Nithya,
    It seems the No of tolerated faulty documents that you have given is 0. So when you initialize try to these.
    While executing OLI*BW including a value in the maintain  "No. tolerated faulty documents" - 5000 or 10000.
    Then execute the program in background.
    Once the job is completed check the background job log if any errors.
    Thanks
    Chandran

  • Error while filling setup table for Sales

    Dear Team,
    We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
    application component 11
    Error determining rate: foreign curr.  local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
    Message No M2810
    application component 13
    Billing document 480050000: error determining stats. currency rate (no updating)
    More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
    I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
    If anybody faced this problem kindly reply to this.
    Best Regards,
    SG

    Hi There,
    Might be your using a wrong document number.
    I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
    If you use vice versa that error will throw.
    Regards,
    MQ

  • Error while filling setup table for 2LIS_03_BF

    Hello,
    I am getting an error while filling set-up table for 2LIS_03_BF.
    Following is the screenshot of the same.
    If I check in ST22, I get following,
    I could fill the setup table for other datasource 2LIS_03_BX without any problem.
    Please suggest.

    Hi,
    Can you try filling the setup table data for that range in background?
    Sometimes because of huge data that you are trying to fill it might through you a dump. So please execute it in background and see if it works?.
    But still can't really say what that dump tells from what you attached.
    Thanks,
    Sathya

  • Timeout error while filling setup tables

    HI all
    I am getting timeout error while filling setup tables(OLI1BW).I clicked on execute button on hte screen.Its not scheduled as a background job.
    Going through threads i have come to know that to solve this issue
    1.BASIS team have to increase backgroung processses or memory
    2.run it as a background job.
    When I went to Program->Executein the backgroundPrint background parameters window has popped up.
    What to do in there?I am afraid if I include parameters like printer name....what is it and how long is it going to print?
    Please let me know.
    Thanks,
    Harika.

    thanks for the reply.
    it was set to LOCL only.
    But i have 3 options in the dropdown  windowsprinter :Send to onenote2007
                                      Microsoft XPS document writer
                                      OUrprinteraddress
    WHich one to choose here?
    Edited by: harikag on Aug 10, 2011 8:47 AM

  • Fatal error while filling connection pool

    I was not getting a connection to an Oracle database and I was getting the following error in cms.log: "FATAL  Connector - Unable to create connection pool for T_Orbis_Oracle: Fatal error while filling connection pool for jdbc:oracle:thin:@MESDB:1521:ASPENB21" where T_Orbis_Oracle is the xMII link name and the database ASPENB21 is on server MESDB. I changed the database username in the link to SYSTEM and I then got a connection and a Created Connection pool message in the log. I then changed back to the username which originally was giving the error and it now also gave me a successful connection. I am now worried that there is an issue in the background which is gradually building up and will begin to fail again as previously. Can anyone explain what is causing this problem and suggest how I can correct it? Thanks, John.

    John,
    Check you have installed the JDBC driver ojdbc14.jar (works for both 9 and 10).
    Also check the server package:
    MII 11.x--->ServerPackage com.lighthammer.Illuminator.connectors.IDBC
    MII 12.x--->com.sap.xmii.Illuminator.connectors.IDBC
    Carefull when you set up the string because some oracle databases have servicenames instead of SID, and the url was different if you use them instead of the SID.
    For services names the url is jdbc:oracle:thin@host:port:SID
    Also check your Network firewall between MII and DB and ports too.
    Oracle9i installs with a number of default accounts.You must unlock all other accounts before using them. Oracle recommends changing all user passwords immediately after installation.
    -Suresh
    Edited by: Suresh Hiremath on Jul 29, 2009 8:20 AM

  • Error while creating index

    hi all,
    i got this error while creating index in portal.
    <b>Index could not be created; creating index failed: Invalid entry in configuration: section nameserver, key address, value tcpip://<nameserverhost>:<nameserverport> is invalid (Errorcode 7213)</b>
    it a little urgent any will be appreciated.
    thanks in advance
    Ranga

    Hi Ranga,
    Please follow http://help.sap.com/saphelp_nw04s/helpdata/en/c7/e0d13f7fb44c21e10000000a1550b0/frameset.htm
    Hope it helps
    Detlev
    PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance!

  • I am using a program that opens a document in adobe and I need to save it back in the program.  I get this message: this document is trying to connet to: fill://index.cfm?event=vendorsonly.submiteventform.  Help

    I am using a program that opens a document in adobe and I need to save it back in the program.  I get this message: this document is trying to connet to: fill://index.cfm?event=vendorsonly.submiteventform.  Help

    Have you contacted the people who make the program? It sounds like something special from that program.

  • Can't open my IBA project: error parasing document index: invalid character in attribute value

    Hi guys,
    I am new of iBooks Author and I am not HTML code savvy (expect the very basics). I have to send an iBooks for an University exam and I can't open my file anymore.
    I was working on it since Saturday, I saved many times and I have quit the iBooks Author and rebooted my iMac few moments ago. There were no crashes.
    The project is a iBook with pictures, videos and some Tumult Hype animations. It is 248Mb.
    Now I can't open the file (but I can see it in quick view). The error message is in the subject, but here it is again:
    "Progetto iBooks" couldn't be opened. Error parsing document index: invalid character in attribute value.
    Now, I have to send the project today (here in Italy it is now 7:10 am) and so I am kind of desperate.
    Any suggestion?
    I am already working on making a new ibook, but if someone could give me a workaround to fix it and open it on iBooks I would be extremely grateful.
    Best regards,
    Sebastiano

    Hi Sebastiano,
    Did you ever get any answer? I have the same problem and now have to work from an old version again (good thing I had backup one manually!)
    Thx
    JP.

  • Error in spatial index

    Hi, everyone
    I created a spatial index on a table, but i get the error message:
    ORA-13033: the data in sdo_elem_info_array of sdo_geometry is unavailable
    How can i write a SQL command to delete those unavailable records?

    Hi,
    here you find an example with a similar error. You simply can validate the spatial data, to find invalid records:
    DROP   TABLE sdo_test;
    CREATE TABLE sdo_test (
      nr      NUMBER,
      GEOM     MDSYS.SDO_GEOMETRY);
    COMMIT;
    --correct
    INSERT INTO sdo_test VALUES (1,
      SDO_GEOMETRY(3302, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1),
        SDO_ORDINATE_ARRAY(-87.899771, 42.000853, 0, -87.899109, 42.000847, 54.8504622)));
    --correct
    INSERT INTO sdo_test VALUES (2,
      SDO_GEOMETRY(3302, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1),
        SDO_ORDINATE_ARRAY(-87.917489, 41.992077, 0, -87.917063, 41.99174, 51.4503307)));
    --empty SDO_ELEM_INFO_ARRAY
    INSERT INTO sdo_test VALUES (3,
      SDO_GEOMETRY(3302, 8307, NULL,  SDO_ELEM_INFO_ARRAY(),
        SDO_ORDINATE_ARRAY(-87.925704, 41.965994, 0, -87.925705, 41.965445, 60.9789892)));
    DELETE FROM USER_SDO_GEOM_METADATA
      WHERE TABLE_NAME = 'SDO_TEST' AND COLUMN_NAME = 'GEOM' ;
    INSERT INTO USER_SDO_GEOM_METADATA (TABLE_NAME, COLUMN_NAME, DIMINFO, SRID)
      VALUES ('SDO_TEST', 'GEOM',
        MDSYS.SDO_DIM_ARRAY
          (MDSYS.SDO_DIM_ELEMENT('X', -87.925705, -87.8991090, 0.001),
           MDSYS.SDO_DIM_ELEMENT('Y',  41.965445,  41.9654450, 0.001),
           MDSYS.SDO_DIM_ELEMENT('M',    0.00000,  60.9789892, 0.001)
         ),8307);
    --DROP   INDEX sdo_test_geom_spix;
    --ORA ERROR 13033
    CREATE INDEX sdo_test_geom_spix
              ON sdo_test(geom)
       INDEXTYPE IS MDSYS.SPATIAL_INDEX
    PARAMETERS('sdo_indx_dims=2');
    --find the invalid record
    SELECT nr, SDO_GEOM.VALIDATE_GEOMETRY(geom,0.001) val
      FROM sdo_test;
    nr     val
    1    TRUE
    2    TRUE
    3    13033
    oops - where is the PREVIEW button in the new design ?!
    In the meantime found the Syntax Highlighting (->Switch to the advanced editor, paste your code, mark it, click the >> (insert) button, select Syntax Highlighting, choose the style...>

  • ORA-29855 - Error creating Spatial Index using a Stored Procedure

    Hi
    I am using Oracle 10gR2 database and I have written a stored procedure to create spatial index. But when i execute this function i get the following error message.
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-13249: internal error in Spatial index: [mdidxrbd]
    ORA-13249: Error in Spatial index: index build failed
    ORA-13249: Error in R-tree: [mdrcrtscrt]
    ORA-13231: failed to create index table [MDRT_217C1$] during R-tree creation
    ORA-13249: Stmt-Execute Failure: CREATE TABLE FGDABZ40.MDRT_217C1$ (NODE_ID NUMBER, NODE_LEVEL NUMBER, INFO BLOB) LOB (INFO) STORE AS (CACHE) NOLOGGING PCTFREE 2
    ORA-29400: data cartridge error
    ORA-01031: insufficient privileges
    ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 10
    ORA-06512: at line 1
    ORA-06512: at "FGDABZ40.PKG_PSSDBE_APPLICATION", line 298
    ORA-06512: at line 17
    The tables that i am passing are registered in metadata and I am able to create indexes directly in sql plus. But when i try to create using this stored procedure, it fails.
    it should be possible to create indexes using a generic function. Has any faced a similar problem?
    regards
    sam

    Hi,
    I am having a same error on Oracle 10gR2 database. When I execute the same statement in sqlplus, it works. But it gives this error when I call the procedure which has this create spatial index statement.
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-13249: internal error in Spatial index: [mdidxrbd]
    ORA-13249: Error in Spatial index: index build failed
    ORA-13249: Error in R-tree: [mdrcrtscrt]
    ORA-13231: failed to create index table [MDRT_20CDA$] during R-tree creation
    ORA-13249: Stmt-Execute Failure: CREATE TABLE "SDOMGR".MDRT_20CDA$ (NODE_ID NUMBER, NODE_LEVEL NUMBER, INFO BLOB) LOB (INFO) STORE AS (CACHE) NOLOGGING PCTFREE 2
    ORA-29400: data cartridge error
    ORA-01031: i
    Any help will be appreciated.
    Thanks,
    Sri

  • Error ITMS-9000 Index:0, Size: 0

    Hi,
    I've spent 30 days for this "Error ITMS-9000 Index:0, Size: 0".
    I made a validation test before I delivered my book package.
    No problem, it's OK.
    I think since last update in OS X(March, 2013) this problem started.
    Today, after Java and Safari update, the same error.
    Whan can I do?
    1 package(s) were not uploaded because they had problems:
    /Users/carllro/Music/iTunes Producer/Playlists/9788999002519.itmsp - Error Messages:
    Apple's web service operation was not successful
    Unable to authenticate the package: 9788999002519.itmsp
    ERROR ITMS-9000: "Index: 0, Size: 0" at Book (MZItmspBookPackage)

    After re-initializing, the porblem is solved.
    I Would like to share our findings:
    The monitoring application includes an embedded Apache Derby database, often referred to as the “trending database”, where monitoring information is stored by default.
    Somehow this Apache Derby database database got corrupt: as a reference we checked our TEST environment and every time we restarted SAPBO, there was a file in the derby database named, dbex.lck and db.lck which was refreshed. We assume these ae lock files which is created at startup. But on the development environment, these files weren't refreshed at startup, they were too old.  before re-initializing CMS, we stopped the node, deleted the dbex.lck and db.lck.files, started CMS but there were no dbex.lck and db.lck.files. So, we assumed the Derby database got corrupt.
    After re-initializing, the porblem is solved.
    Thank you all
    Cheers
    Sem

Maybe you are looking for