Error in Global Field of smartforms

Hi,
I'm new to ABAP.i got struck in creation of a smartform where it shows the error in Global definition
"IM_FS_VBRK" is a table without a header line and therefore has no component called "WAERK"
here 'IM_FS_VBRK' is a work area for table zvbrk that i created.
what might be the reason could any one help it out.
Regards,
syd.

Hi Ahmed,
You are using your internal table as work area. That why you are getting this error. Please check your code, the structure that you pass from print program should be same as that you define in global definition.
I hope this would resolve your issue.
Dont forget to appreciate  if found helpful..
Regards,
Vinit

Similar Messages

  • Handling currency and quantity fields in smartforms

    Hi,
    can i know how to handle currency and quantity fields in smartforms.
    i have to display ZMENG field of VBAP table but it is not getting displayed.
    i have given the details in CURRENCY AND QUANTITY tab in the GLOBAL DEFINITIONS.
    Thanks,
    BJR.

    Hi
    Did u pass that value in the INPUT and OUTPUT parameters where u r calling that field...
    if u have not included that in The Currency/Quant Tab will get an Error Message.....
    and &VBAP-ZMENG& ..in the text
    surya

  • Setting output length of desired values for a Field in Smartforms.

    Hi,
       I'm working right now on 4.6c system and I have a field declared as "String" in the Global Definition, on viewing the output in the print preview i find that it is printing only 255 characters while the actual field value is more than that (somewhere around 600+).
             Could you please help me out in as to how to declare this particular field in Smartforms.
    Thanks in Advance,
    Regards,
    Divaker

    check this
    Re: Output length restricted to 255 when running ALV report in background
    in that case u have to create a new Print Format which can give u complete data in while prining.
    format will  be like this
    65*512.
    Regards
    Prabhu

  • Error in global conversion rule for InfoObject 0PERSLANGU when activating

    Dear Experts
    We are working on HR in BI7.0 with Ehp1.
    I am trying to Activate the Transfer Rules of 0HR_PA_PA_1 DataSource which has the BID (BW Development) as the Source System to itself in order to load 0PAPA_C02 (Headcount) InfoCube.
    When trying to Activate, it gives the following error message:
    Error in global conversion rule for InfoObject 0PERSLANGU
    Message no. RSAR263
    Diagnosis
    Errors with the global conversion rule for the field 0PERSLANGU.
    System Response
    The function module delivers the following error message:
    Incorrect statament: Expression missing Operand mi
    Procedure
    Check the definition of the global conversion rule for an InfoObject.
    In fact, we are Re-implementing 3.0b BW System in new BI7.0 Ehp1 System. I have checked the Config of InfoObject 0PERSLANGU to the one available in existing BWP (3.0b Production) system and it's all the same.
    Has anyone come across similar error message and how did you resolve. Any help is very much appreciated.
    Many Thanks,
    Chandu

    HI Chandu ,
    It is a bug in the system , can you take a look at the SAP note
    Note 1070702 - RSAR 263: Error in global conversion rule for InfoObject
    Hope it helps ,
    Regards,'
    Sathya

  • Error in global conversion rule for InfoObject when Activating 2LIS_11_V_IT

    Hello,
    I am facing several issues while activating the Content. For 2LIS_11_V_ITM I get the following message:
    Error in global conversion rule for InfoObject 0INCOTERMS2
    Message no. RSAR263
    Diagnosis
    Errors with the global conversion rule for the field 0INCOTERMS2.
    System Response
    The function module delivers the following error message:
    Incorrect statament: Expression missing Operand mi
    Procedure
    Check the definition of the global conversion rule for an InfoObject.
    Any suggestion?
    thanks,

    Hi Mohan,
    seems this message is common when activating BI_CONT.
    I believe what i did was:
    - go to the InfoObject
    - verified Object Routine (check) (then was ok).
    - Removed Object form DS
    - Activated DS  (w/o info object was giving problems)
    - Placed InfoObject back to the DS
    - Activated DS but now including Info Object
    Believe that worked for me.
    Let me know how it goes.

  • How to add a field in smartforms

    hello friends,
                   how to add a RFQ field in smartforms.
    thx,
    ki

    Hi,
    Pls check
    Smartform
    Eddy
    PS.
    Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
    Spread the wor(l)d!

  • FI:While posting MIRO getting Error of Balancing field Segment not filled

    Hello SAP Gurus,
    While  posting MIRO getting Error of Balancing field Segment in line item 001 not filled
    Message No.GLT2201.
    Please suggest me solution for it i read lots of related threats but could not solve this error.

    SPRO-Financial Accounting (New)-General Ledger Accounting (New)-Business Transactions-Document Splitting-Edit Constants for Nonassigned Processes-Select your constant-Double click and Select Assignment of profit center- Enter your dummy profit center here   otherwise
    SPRO-Financial Accounting (New)-General Ledger Accounting (New)-Business Transactions-Document Splitting-Edit Constants for Nonassigned Processes-Select your constant-Double click and Select Assignment of values-Enter here segment.

  • Error with quantity field:Datasource Creation Using Function Module method

    Problem with DATASOURCE Creation using Function Module method :
    I have created a datasource ZSTANDARD_COST_PRICE using Function Module method . The datasource creation is successfull when I remove the quantity field from the Z table . If I dont remove the quantity field from my Z table it gives an error as "Units Field WAERS for field STPRS of datasource ZSTANDARD_COST_PRICE is hidden". I am not able to remove this error . Please someone guide.
    Let me know if my explanation is not clear enough.
    Thanks in advance,
    Neha.
    Z table definition is as below :
    MATNR MATNR CHAR 18 0 Material Number
    BWKEY BWKEY CHAR 4 0 Valuation area
    LFGJA LFGJA NUMC 4 0 Fiscal Year of Current Period
    STPRS STPRS CURR 11 2 Standard Price   " Here the currency field is WAERS and table T001
    PEINH PEINH DEC 5 0 Price Unit
    VJSTP VJSTP CURR 11 2 Standard price in previous year
    VJPEI VJPEI DEC 5 0 Price unit of previous year.
    Edited by: Neha Rathi on Jan 30, 2009 3:03 PM

    Hi,
    You should add it as one of the main fields as you have added other fields and not as the currency fields...that is..it should be part of the data source and you should be able to see it in RSO2...
    Also if added as i said then it will come as new field in the data source...you can either let it be there...or hide it..
    also if you want to populate it then you will have to write the code for this fields as well.
    Thanks
    Ajeet

  • How to populate the Error stack during error records in field level routine

    hi,
    I am capturing the error records in Field level routine in transformation. now i want these records to reflect in error stack.
    i am using 'Append monitor-rec to MONITOR' at the moment but i cant see any records in error stack.
    but when i am using the same statement in start routine i am getting records in error stack.
    can anyone please help as to how can i populate error stack through field level routine?

    Hi,
    Try to do it in the end routine instead of the field routine.
    It should work.
    Regards,
    Joe

  • FF_5 - Import Bank Statement, Err: Formatting error in the field COBL-KOSTL

    Hi
    When importing the bank statement I'm getting the error
    Error: (00 298) Formatting error in the field COBL-KOSTL ; see next message
    Why is it doing this? In OKB9 I have the GL Account and the cost center assigned. It is the ne GL that is giving this problem, in the classic GL I do not have this problem.
    Thanks in advance

    Hi
    No, it is not that. For some reason in the new GL it does not seem to determine the cost centers and profit centers as usual.
    For exampl to allocate the Profit Center for Balance Sheet Account I used to use 3KEH in the classic gl but in the New gl we must use FAGL3KEH.
    Now with cost center i'm having the same problem, does not determine the cost center when importing the bank statement.
    Can someone help me.
    Thanks in advance
    Edited by: Louis De Gouveia on Mar 3, 2009 7:07 AM

  • Error in ALV : Field Does not exists in Output table .

    Hi All,
    In my ALV report, program get dumped and showing error when i tried to put a col named Distribution channel ion the alv.
    I have put the Distribution cannel field in the IT_FInal table , but still getting folwong errors :
    Error : Field Symbol is not been assigned.
    As Instructed i have passed            I_INTERFACE_CHECK              = 'X'.
    By this i am getting detail error that :
    Field Distribution channel does not exists in Output table & Heading for List is missing .
    But i have maintained the distribition channel in IT_Final table
    Please suggest wheather we have to define dis channel in any other place.
    Thanks in advance.
    Can any one help me regrarding this.
    Thanks in advance.

    Hello,
    You have to populate the same in the fieldcatalog as well, i think you have not maintained this field there.
    BR,
    Suhas
    PS: Also make it a point to follow-up on your previous post: [Error in ALV : Field Symbol not been assigned.|Error in ALV : Field Symbol not been assigned.]

  • Calling a standard subroutine and setting global fields

    Hallo ...
    I am calling a subroutine in program A(standard program ) from a  program B .   there are a set of global fields in program A  that i need to first set before i call this subroutine from Program B. is it posible to set these fields from program B. (since i cannot do much on the program A side as it is standard).?
    Can some one suggest how can set these fields . some of these fields are flags and some normal fields. Not all the fields have parameterd ids. any idea how can i set thses fields from program B ?????
    Help will be appriciated
    Thanks

    Hello,
    there are two choices:
    (1) You can add a form to program A, if the standard program lets you implement user-defined code. For example, in program SAPMV45A you use a certain include to implement user-defined forms. You can define a form which takes the actual values of the fields in program A which you want to change as parameter. The form then changes the fields (from within the form, the fields are visible and changable). You can call this form by using PERFORM your_form IN program_A.
    (2) You can use a "dirty assign": Refer to the F1 help of the ASSIGN statement for more information about that. Sample may look like this (note the brackets and apostrophes):
    ASSIGN ('(PROGRAM_A)GLOBAL_FIELD') to <fs_proga_global_field>.
    However, the assign only works when program A has already been loaded into the internal mode during runtime. This means before doing the ASSIGN, any code of program A must have been executed in the current internal mode.
    Hope this helps,
    David

  • Error in global conversion rule for InfoObject 0INCOTERMS2

    When I activate BI content 2LIS_12_VCITM with transfer rule, The transfer rule was error with the message " Error in global conversion rule for InfoObject 0INCOTERMS2" and Mgs No. 263.
    The transfer rule cannot be activated.
    I checked the 0INCOTERMS2 infoObject . The global conversion rule is no error.
    The global conversion is in below.
    ============================================================
    PROGRAM CONVERSION_ROUTINE.
    Type pools used by conversion program
    TYPE-POOLS: RSD, RSARC, RSARR.
    TYPES: DE_0INCOTERMS2(000028) TYPE C.
    Conversion rule for InfoObject 0INCOTERMS2
        Data type       = CHAR
        ABAP type       = C
        ABAP length     = 000028
    FORM CONVERT_0INCOTERMS2
      USING    RECORD_NO LIKE SY-TABIX
               SOURCE_SYSTEM TYPE RSA_LOGSYS
               IOBJ_NAME TYPE RSIOBJNM
      CHANGING RESULT TYPE DE_0INCOTERMS2 " InfoObject value
               RETURNCODE LIKE SY-SUBRC.
    $$ begin of routine - insert your code only below this line        -
      TRANSLATE RESULT TO UPPER CASE.
    $$ end of routine - insert your code only before this line         -
    ENDFORM.
    =================================================================
    If you have any idea or face the similar problem, please suggest solution.
    Thank you.

    Good afternoon,
    If you have not done so already can you apply the SAP note  1387854 in your system and it should prevent the problem from happening again. If you also reactivate the infoobject  0INCOTERMS2 in RSD1 then it should be possible to manually activate the  transfer rule.
    Best Regards,
    Des

  • [Application Update Error] - The element 'Field' in namespace 'urn:deployment-manifest-schema' cannot contain text.

    Hello,
    I developed a custom SharePoint 2013 Application (SharePoint hosted) and everything works fine. If I tried to update the application and I ran into the following error:
    The element 'Field' in namespace 'urn:deployment-manifest-schema' cannot contain text. List
    of possible elements expected: any element in namespace '##any'.
    If I redeploy the application (without update, just a new instance) everything works fine. Only the update scenario throws the exception above. 
    I tried different things to solve that issue:
    I recreated the feature
    I checked all the custom field definitions, content types and lists inside the app. 
    I tried different O365 tenants and a SharePoint 2013 On Premise Development Server (Same problem on all systems)
    Can anybody give me a tip to solve that problem?
    Thanks in advance

    Hi,
    According to your description, when you try to update your SharePoint Hosted App, an error occurs.
    To narrow down the issue, I would suggest you create a simple app without other components in it, deploy it and then update it to see if this error will still occur.
    Once you get a workable app without the update issue, then you can add other customizations one after one in this app and perform the update. By doing this, it would
    be easier to find out the root cause.
    Anyway, you can take a look at the link below about updating app for more information:
    http://msdn.microsoft.com/en-us/library/office/dn265910(v=office.15).aspx
    Feel free to reply if there any progress.
    Thanks
    Patrick Liang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
    contact [email protected]
    Patrick Liang
    TechNet Community Support

  • Mail / Merge in WORD  with DOI. Error in WORD 'field separator'

    I have a program that creates   WORD DOcuments  for merging with data.
    I use  WORD documents created with BDS.
    I used  program   SAPRDEMO_MAILMERGE_INTERFACE as an example for creating my own program.
    When I call METHOD VIEW  ,after creating data source and MERGE, I get following error in WORD
       'field separator?.  WORD asks which is the separator for field.
    whatever  separator I indicate,  WORD issues an error saying    no record found.
    If I execute program   SAPRDEMO_MAILMERGE_INTERFACE,  it  works.
    I don't understand what happens.

    I found solution.
    In my data source , I have only 1 record.
    When calling  method merge_range  I must indicate 0 in record number  and not 1 ( with 1 it worked on our system but not on the customer system : cause in  SAP or EXCEL I don't know. )
    Fusion  données  source
          CALL METHOD HANDLE->MERGE_RANGE
            EXPORTING
              FIRST   = 0
              LAST    = 0
            IMPORTING
              ERROR   = error
              RETCODE = retcode.
          clear l_sy.
          CALL METHOD ERROR->GET_MESSAGE
            IMPORTING
              MESSAGE_ID     = l_SY-MSGID
              MESSAGE_NUMBER = l_SY-MSGNO
              PARAM1         = l_SY-MSGV1
              PARAM2         = l_SY-MSGV2
              PARAM3         = l_SY-MSGV3
              PARAM4         = l_SY-MSGV4.

Maybe you are looking for