Error in HTTP - SOAP synchronous senario.

Hi All,
I am working on a HTTP -> SOAP synchronous scenario. I am using the wftetch tool to send HTTP request. I am getting the following error in the Wfetch tool when I try to execute the same:
URL-Parameter service (sender service) in URL is missing
And in SXMB_MONI I get following error:
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Connection timed out: connect</SAP:AdditionalText>
Please provide inputs to correct the error.
Many thanks,,
Neha

Hi Neha,
pls do chk the link that u have used to connect the SOAP and chk in the Wfetch tool
for the address
do chk this links
/message/266750#266750 [original link is broken]
Some handy HTTP tools
Thanx
Sampath

Similar Messages

File to soap synchronous senario

Hi Experts
File to soap synchronous senario ?
Can you tell me step by step procedure
Regards
Sagar

Hi Sagar,
Use request response module bean at File adapter to achieve synchronous communication.
Please check below links for detailed information
Using Request Response Bean Module in FILE Adapter - Process Integration - SCN Wiki
File-RFC-File(Without BPM) - Process Integration - SCN Wiki
Adding RequestResponseBean in the Module Processor - Adding Modules to the Module Processor - SAP Library
Sync/Async scenarios without BPM
Regards,
Krupa

Error in HTTP to RFC senario?

Hi experts,
iam working on PI7 sandbox,i done a senario HTTP is the sender and RFC is the Receiver.....where i will send material nunber and i need responce from SAP system unit and weight details.
iam using HTTP client tool 2 post the payload into xi,iam geting this error
Result:
http-Status: 500 Internal Server Error
Payload:
<SAP:Error><SAP:Category>XIServer</SAP:Category><SAP:Code>MAPPING.NO_MAPPINGPROGRAM_FOUND</SAP:Code><SAP:P1>http://HTTP.com IM_Material</SAP:P1><SAP:Stack>Interface mapping http://HTTP.com IM_Material does not exist in runtime cache</SAP:Stack></SAP:Error>
i activated all objects in IR and ID i have done TEST CONFIGURATION in ID it was working fine......i checked the message mapping and Interface mapping ......still iam geting error.
iam using BAPI_Material_Get_detailsv this bapi...
Pleace help me in this issue
Regards,
Phani

Hi,
1. Just go the Interface Mapping and see whether u have specified same Msg Mpping prog in that.
2.Also go to the Interface determination and chk if u have specified the correct inbound Interface and Interaace Mapping corresponding to it.
Regards,
Ashwin M
Reward if helfpul

Exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPExcept

Hi all,
I am getting below error while invoking Siebel web service from BPEL service,
<fault>
-<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="summary">
<summary>
exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: oracle.j2ee.ws.saaj.ContentTypeException: Not a valid SOAP Content-Type: text/html; charset=UTF-8
</summary>
</part>
</remoteFault>
</fault
Please help me to resolve this issue.
Thanks,
Santosh M E

Resolved, I was invoking an external Web service which is an Asynchronous 2 way.
Didn't capture the reply back from the Async service.

HTTP error while sending SOAP request using wsdl file

We created SOAP request using the wsdl file ; while sending SOAP request from Altova XMLSpy, we are getting the below error.
HTTP error: could not post file
Can you please explain how to resolve this issue
Regards,
Sanghamitra

there is very little information to help you here.
Can you confirm if this is a SOAP sender scenario or SOAP receiver scenario?
Also do go to thru these links to help you out;
Troubleshooting
Troubleshooting - RFC and SOAP scenarios *** Updated on 20/04/2009 ***
RFC -> SOAP
RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
SOAP <-> XI <-> RFC/BAPI
Walkthrough - SOAP XI RFC/BAPI

SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPT

Hi there,
I am trying to publish a file from SAP as web service using XI and SOAP Adapter.
I am using ABAP proxy to get the data into XI.
Designing and Configuration in XI has no problems because when i use File adapter the data is trasmitted to FTP server.
But when I used SOAP Reciever adapter I am getting following error in RWB
Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Error during parsing of SOAP header.
Scenario: SAP ABAP Proxy -> XI -> WebService. Asynchronous.
SOAP Receiver adaptor.
Target URL http://<host>:<port number >/sap/xi/engine?type=entry&version=3.0&Sender.Service=SAPDC2653&Interface=urn:bzttest:00:hsa:test%5EOB_MI_BZT_TEST&QualityOfService=ExactlyOnce
Do not use SOAP Envelop is checked.
SOAP Action http://sap.com/xi/WebService/soap1.1
What i am missing here? How should I solve this problem?
Any help is appreciated,
Thx,
Yogi

Say there's a bapi/rfc that you want to call on an R/3 backend (e.g. 4.6c). On it's own, the R/3 system cannot expose the rfc/bapi as a web service, but XI can. So in this case, the scenario would be:
WS client -> XI -> R/3
When XI "exposes" a web service, it is exposing a service for a receiving system (in the above example, the R/3 system). XI itself does not provide or contain the service implementation. When XI exposes a web service, it is always done via the sender soap adapter (i.e. if soap adapter is used). Receiver soap adapter is used to call or consume an actual web service from an external application.
Regards,
Jin

Error in Proxy to SOAP synchronous scenario

Hi Gurus,
Hope you are doing well. I have a Proxy to SOAP synchronous interface interacting with an external system (system outside the firewall/landscape of my company).
When I am trying to post the request message from XI, I am getting the following error.
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs
In the WSDL provided by the external application, i.e. receiver WSDL, there is no attribute/field with the name 'IncludeExceptionDetailInFaults' and there is no fault string defined.
Where is this error being thrown up? Is it a network/firewall error that XI is unable to determine?
Please provide an answer as soon as possible.
regards
Debansu

Hi,
i think it is the problem in the WSDL provider system, because it is throwing the Error with some string".NET",
do the below steps for investigating the issue
1)try pinging the URL provided in the WSDL from internet explorer.
2)if it is successfull, try to push one message from SOAP UI to by importing that WSDL, if you get any error then it is problem in the end system.
Thank You,
Madhav

Error using Sender SOAP adapter over HTTPS

Hi experts,
Few weeks ago, i developed an interface as follows: SOAP <-> XI <-> RFC.
I tested the functionality using Altova and everything went well, with HTTP.
However, when i use HTTPS it fails throwing these error messages (pop ups):
"HTTP error: could not post file"......
"Error sending the soap data"
I have reviewed the SSL certificates installation and everything seems to be ok, but currently i am stuck and do not know how to fix this.
I have also change the ID comm channel from HTTP to HTTPS with client aut.
Is there any special service i have to activate? (XI services and SPIGATE are already done)
Could you please assist?
Thanks in advance and best regards,
David

David,
have a look @ these threads...u may get some help!!!
Sender Soap with HTTPS
https Soap Adapter
Regards
Biplab

ERROR During call of SOAP with a SOAP- RFC- SOAP Synchronous scenario

Hello Experts,
I've recently created a SOAP->RFC->SOAP synchronous scenario but every time I'm invoking the SOAP via XMLSpy then i will hang and send a timeout error. Also a log in XI was generated as shown below.
I hope you could help me on this one.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Date and Time          28.09.2010 09:31:23
Short text
     SQL error in the database when accessing a table.
What happened?
     The database system detected a deadlock and avoided it by rolling back
     your transaction.
What can you do?
     If possible (and necessary), repeat the last database transaction in the
      hope that locking the object will not result in another deadlock.
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
      in
     procedure "DELETE_LUW_PACKET" "(FORM)", nor was it propagated by a RAISING
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     The database system recognized that your last operation on the database
     would have led to a deadlock.
     Therefore, your transaction was rolled back
     to avoid this.
     ORACLE always terminates any transaction that would result in deadlock.
     The other transactions involved in this potential deadlock
     are not affected by the termination.
Regards,
Alfred

Normally such an error comes when the DB of SAP PI is full.
Contact your BASIS or ADMIN team and ask them to free the DB space.
Regards,
Abhishek.

HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7

All -
I'm new to consuming web services in JDeveloper. I'm using Oracle JDEV 10.1.3.3/OC4J. I'm using this version since it is compatible with Oracle EBS 12.1.3. My intent is to pull data from our third party recruitment app (Success Factors) and load that data into Oracle HRIS. I'm already doing this through a .NET application. I'm converting it to be a Java Concurrent Program in EBS. The code listed below is a stub call to verify I'm on the right track. I created a JDeveloper Web Services proxy project. I'm testing it locally on my windows desktop. When I'm able to consume the service successfully, then I'll think about moving it to the EBS server.
I'm getting the following error when I invoke the following service:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7
End point is: https://api4.successfactors.com/sfapi/v1/soap?wsdl
Any help/assistance would be much appreciated.
Below is my code and output of my test:
package emsc.oracle.apps.emscper.sfapi.proxy;
import HTTPClient.HTTPConnection;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.IsValidSession;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.IsValidSessionResponse;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.Login;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.LoginResponse;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.LoginResult;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.Logout;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.LogoutResponse;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.SFCredential;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.SFParameter;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.Error;
import java.io.File;
import javax.xml.rpc.ServiceFactory;
import java.util.ArrayList;
import java.util.List;
import java.util.Date;
import javax.xml.ws.BindingProvider;
import javax.xml.soap.SOAPException;
import java.util.Map;
import oracle.security.ssl.OracleSSLCredential;
public class SFAPITest {
 // Declare members:
 private String companyId;
 private String userName;
 private String password;
 private String developerKey;
 private Date effDt;
 private String greaterThanEffDt;
 private String lessThanEffDt;
 // Declare constants:
 final static private String breakLine = "+---------------------------------------------------------------------------+";
 final static private String format = "yyyy-mm-dd";
 private enum ReqId {
 PrimaryReq(25),
 PrimaryReqCEO(26),
 EmCarePrimary(27),
 RTI(28),
 EmCareClinical(29);
 private int reqId;
 private ReqId() {
 private ReqId(int value) {
 reqId = value;
 public int getReqId() {
 return reqId;
 // Getters and Setters:
 protected String getCompanyId() {
 return this.companyId;
 protected void setCompanyId(String value) {
 this.companyId = value;
 protected String getUserName() {
 return this.userName;
 protected void setUserName(String value) {
 this.userName = value;
 protected String getPassword() {
 return this.password;
 protected void setPassword(String value) {
 this.password = value;
 protected String getDeveloperKey() {
 return this.developerKey;
 protected void setDeveloperKey(String value) {
 this.developerKey = value;
 protected Date getEffDt() {
 return this.effDt;
 protected void setEffDt(Date value) {
 this.effDt = value;
 protected String getGreaterThanEffDt() {
 return this.greaterThanEffDt;
 protected void setGreaterThanEffDt(String value) {
 this.greaterThanEffDt = value;
 protected String getLessThanEffDt() {
 return this.lessThanEffDt;
 protected void setLessThanEffDt(String value) {
 this.lessThanEffDt = value;
 public void runProgram()
 SFAPIService mySFAPIService;
 String CompletionText = "";
 String effDtStr2 = null;
 /* Code your program logic here.
 * Use getJDBCConnection method to get the connection object for any
 * JDBC operations.
 * Use CpContext provided commit,rollback methods to commit/rollback
 * data base transactions.
 * Don't forget to release the connection before returning from this
 * method.
 /* Call setCompletion method to set the request completion status and
 * completion text.
 * Status values are ReqCompletion.NORMAL,ReqCompletion.WARNING,
 * ReqCompletion.ERROR.
 * Use Completion text message of length 240 characters. If it is more
 * than 240 then full string will appear in log file and truncated 240
 * characters will be used as request completion text.
 try
 ServiceFactory factory = ServiceFactory.newInstance();
 mySFAPIService = (emsc.oracle.apps.emscper.sfapi.proxy.SFAPIService)factory.loadService(emsc.oracle.apps.emscper.sfapi.proxy.SFAPIService.class);
 SFAPI api = mySFAPIService.getSFAPI();
 /// SFAPI api = new SFAPI();
 //Map<String, Object> requestContext = ((BindingProvider) api).getRequestContext();
 //requestContext.put(BindingProvider.SESSION_MAINTAIN_PROPERTY, true);
 System.out.println("ServiceName => " + mySFAPIService.getServiceName().toString());
 System.out.println("End Point => " + mySFAPIService.getServiceName().toString());
 System.out.println(breakLine);
 // Authentication: Login to SFAPI:
 SFCredential credential = new SFCredential();
 // Fake credentials being passed in for this post:
 credential.setCompanyId("XXX");
 credential.setUsername("XXX");
 credential.setPassword("XXX");
 credential.setDeveloperKey("XXX");
 HTTPConnection httpsConnection = null;
 OracleSSLCredential _credential = new OracleSSLCredential();
 _credential.setWallet("\\\\\\C:\\Program Files\\Java\\jdk1.6.0_33\\jre\\lib\\security", "ParkEstes3");
 /*System.setProperty("javax.net.ssl.trustStore","C:\\\\\OraHome_1\\jdev\\jdevbin\\jdk\\jre\\lib\\security\\keystore");
 System.setProperty("javax.net.ssl.trustStorePassword","changeit");
 System.out.println(System.getProperty("javax.net.ssl.trustStore"));*/
 // SFParameter: Define a generic SFParameter List. This is a necessary parameter
 // to invoking calls in SFAPI:
 /*System.setProperty("javax.net.ssl.keyStore",
 "file:\\\C:\\jdk1.4.1\\jre\\lib\\security\\client.keystore");
 System.setProperty("javax.net.ssl.keyStorePassword","welcome"); */
 /* System.setProperty("oracle.net.wallet_location",
 "(SOURCE=(METHOD=file)(METHOD_DATA=(DIRECTORY=\\\C:\Users\dparrish\Oracle\WALLETS)))"); // (2) */
 File kstore = new File("C:\\OraHome_1\\jdev\\jdevbin\\jdk\\jre\\lib\\security\\jssecacerts");
 boolean exists = kstore.exists();
 if (!exists) {
 System.out.println("Keystore does not exist");
 else {
 System.out.println("Keystore does exist");
 System.setProperty("javax.net.ssl.trustStore", kstore.getAbsolutePath());
 System.setProperty("javax.net.ssl.trustStorePassword", "changeit");
 //System.setProperty("proxySet", "false");
 //System.setProperty("http.proxyHost", "127.0.0.1");
 //System.setProperty("http.proxyPort", "8080");
 System.out.println(kstore.getAbsolutePath());
 List<SFParameter> lst = new ArrayList<SFParameter>();
 SFParameter param = new SFParameter();
 param.setName("");
 param.setValue("");
 lst.add(param);
 SFParameter[] sfParam = lst.toArray(new SFParameter[lst.size()]);
 Login login = new Login();
 try {
 login.setCredential(credential);
 System.out.println("1");
 login.setParam(sfParam);
 System.out.println("2");
 LoginResponse loginResponse = new LoginResponse();
 LoginResult loginResult = new LoginResult();
 try {
 loginResponse = api.login(login);
 catch (Exception e ) {
 System.out.println(e.getMessage());
 System.out.println("3");
 try {
 loginResult = loginResponse.getResult();
 catch (Exception e ) {
 System.out.println(e.getMessage());
 System.out.println("4");
 IsValidSession vs = new IsValidSession();
 IsValidSessionResponse isValidSessionResponse = api.isValidSession(vs);
 System.out.println("5");
 if (isValidSessionResponse.isResult()) {
 System.out.println("Session is valid");
 System.out.println("Result => " + loginResult.getSessionId());
 System.out.println(breakLine);
 Logout logout = new Logout();
 LogoutResponse logoutResponse = api.logout(logout);
 if (logoutResponse.isResult()) {
 System.out.println("Logout of SFAPI Successful");
 else {
 System.out.println("Logout of SFAPI Unsuccessful");
 else {
 System.out.println("Session is invalid");
 List<Error> errors = new ArrayList<Error>();
 for (int i = 0; i < loginResult.getError().length; i++) {
 errors.add(loginResult.getError()[i]);
 for (int i = 0; i < errors.size(); i++) {
 System.out.println("Error Indice => " + i);
 System.out.println("Error Code: => " + errors.get(i).getErrorCode());
 System.out.println("Error Message: => " + errors.get(i).getErrorMessage());
 System.out.println(breakLine);
 } // end for loop of SFObject errors
 } // end InvalidSession
 catch (Exception e)
 System.out.println("Session Credential Exception");
 System.out.println("Exception => " + e.getMessage());
 System.out.println(breakLine);
 catch (Exception e)
 System.out.println("Parameter List Exception");
 System.out.println("Exception => " + e.getMessage());
 System.out.println(breakLine);
 } // end runProgram
 // Constructor:
 public SFAPITest() {
 } // end constructor
 public static void main (String args[]) {
 try
 SFAPITest test = new SFAPITest();
 test.runProgram();
 catch (Exception e) {
 System.out.println("main exception => " + e.getMessage());
} // SFAPITest
Here is the output with trace:
WARNING: Unable to connect to URL: https://api4.successfactors.com:443/sfapi/v1/soap due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7
Session Credential Exception
Exception => ; nested exception is:
 HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7
+---------------------------------------------------------------------------+
Process exited with exit code 0.

The other end is throwing back a programming error.
That might be because you are sending incorrect data and the other end fails to validate it.
You might be able to guess based on your C# code. But, since you are using soap one generic solution is available to you.
- Get an http proxy interceptor like wireshark.
- Run it while your C# app runs, collect the http requests from that.
- Run it while running your java code, collect the http requests from that.
Compare the two.

PO 7.4: NW BPM: HTTP Error response for SOAP request or invalid content-type.HTTP 200 OK

Hi Experts
I am trying to call NW BPM scenario(File to BPM) from PI, and using below adapter config.
I am getting below error.
Failed to call the endpoint: Error in call over HTTP: HTTP 200 OK
SOAP: Call failed: java.io.IOException: HTTP Error response for SOAP request or invalid content-type.; HTTP 200 OK
SOAP: Error occurred: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: HTTP Error response for SOAP request or invalid content-type.; HTTP 200 OK
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: HTTP Error response for SOAP request or invalid content-type.; HTTP 200 OK
Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: HTTP Error response for SOAP request or invalid content-type.; HTTP 200 OK
Any idea how to fix this issue?
Thanks,
Sandeep Maurya.

Hi Sandeep,
Test the URL from your browser and check the proxy settings as well.
Refer the below links
SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT
SOAP: Call failed: java.io.IOException: Failed to get the input stream from socket: java.net.SocketException: Connection…
Regards
Bhargava Krishna

SOAP Receiver Error: HTTP Error response for SOAP Request

Hi gurus,
I'm facing a weird error in File --> PI 7.31 java only --> soap receiver proxy.
The other interfaces runs well. just one get the the following error:
Exception caught by adapter framework: java.io.IOException: Error receiving or parsing request message: java.io.IOException: HTTP Error response for SOAP request or invalid content-type.
I check the payload and test in the inbound proxy. on error.
Any hints?
Thanks a lot!
regards
Christine

Hello Christine,
I faced the same issue,
You can use the beans below to overcome the error.
And charset should be utf-8

Error in http call soap run time exception

Hi All,
we are facing an issue whenever we are sending the file using soap protocal.
the issue here is.
when one user trying to send files he is getting error in http call soap run time exception.
when he try to login to other PC then he can able to send the file without any exception.
we have checked the local setting and coockies.
any one please help me.
Regards,
Vishal Kommera

Its not in the notepad file but when I open it in internet explorer etc it appears... But cant see the '-' in the internal table though.
I have also found one interesting this, when i pass the XML directly i.e hard code it there is no exception caused...
Edited by: sk123456 on Oct 19, 2009 9:05 AM
Edited by: sk123456 on Oct 19, 2009 9:07 AM

Error in the SOAP Receiver communication channel

Hi ,
My scenario is RFC - to -SOAP (synchronous ) i have specified the TARGET URL inthe SOAP receiver comminication chanel.. but while testing the interface by providing the test data from R/3 .. I'm not getting any Respose.. ..
If I check in the SXMB_MONI in i'm getting the following message .. but the URL whicjh i provided that is fine.. but my doubt is through XI may be it's not able to connect the Target System... .. so, please suggest me...
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: www.webservicex.net</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
regards
Jain

By default, the SOAP adapter sends the SOAP message with the content type text/xml.
When you check "Do not use SOAP envelope", the default contnet type is application/xml.
You can change the content type like this: Go to the SOAP receiver communication channel module tab. Add the module "localejbs/AF_Modules/MessageTransformBean" before the standard module. Add the parameter name Transform.ContentType and value text/xml.
Check out this
/people/varadharajan.krishnasamy/blog/2007/01/09/troubleshooting-soap-message--xi
One way of testing ur scenario
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible
Also have a look here
SAP Note 856597
reward points if solution found helpfull
regards
chandrakanth

IDOC to SOAP synchronous scenario

Hi All,
We have an IDOC to SOAP synchronous scenario in which IDOCs are sent to SOAP by calling a service and then SOAP sends a response back to XI . The response is not sent to SAP- R3. Please suggest on this
Thanks

Hello Rajesh,
Thanks for your good justification.
Here I have also replicated same kind of scenario and having same kind of issue.
One thing just wanted to confirm - Even though SOAP adapter expects HTTP 200 response back from webservice, still SOAP channel is getting into red with following , and as we have Alert configured ...Alert mail also receiving as part of Error only. So How can we avoid that response ? Is there have any parameter to handle or suppress the response back?
Thanks!
Goutam

Error in HTTP - SOAP synchronous senario.

Similar Messages

Maybe you are looking for