Error in installaing Application Server

Hello Experts,
I got this error while i  installing Application server,
Cannot connect to CHIP-MONG2 Error(s) returned: [SQL Server]Login failed for user ''. The user is not associated with a trusted SQL Server connection. SOLUTION: Check that you specified the correct name for the database server, that the server is running and you are authorized to log on to it.
Can anyone solve it ?
Thanks and Regards
Dhaval Thaker

Concerning this error:
The user is not associated with a trusted SQL Server connection.
it might also take place if the authentication mode configured for MS SQL Server is wrong. As you may know, there are two authentication modes:
- first one is 'SQL Server and Windows' and the second one is 'Windows
   only'.
So it can happen because the user is not associated with a trusted SQL Server connection, which seems to occur because your SQL Server instance is set to the Windows authentication mode - please check this point, the authentication mode that should be set is 'SQL Server and Windows'.
Also,
Make also sure the environment variables below are correct :
  MSSQL_SCHEMA=<sid>
  MSSQL_DBNAME=<SID>
  MSSQL_SERVER=<sql_server_name>
  DBMS_TYPE=mss
Also, check the attached SAP Note #551915 for more details.
If you logon with the operating system user sidadm, are you able to connect to the database instance using the trusted authentication? To test it, just logon to the Windows OS with this user. Then open an Enterprise Manager (if SQL 2000) or Management Studio(if SQL 2005) and then try to connect with the trusted/Windows authentication method.
Please review below SAP notes:
#592514 : MSSQL: internal database users, permissions and security
#551915 : R/3 won't start after database restore or database copy.

Similar Messages

  • Post Installation - Error while starting application Server(Weblogic10.3.5)

    I have installed the Webcenter Sites and can access the home ( http://localhost:7101/servlet/wem/fatwire/home ) .
    However , I am getting the below error . The application server is weblogic 10.3.5 ( Jdeveloper Integrated Weblogic Server ) .
    I have Observed the below error in the application server console .
    Can anyone please help to over come this error ?
    2012-07-09 18:23:41,889 ERROR [com.fatwire.logging.cs] - <Exception reading url from http://127.0.0.1:7101/servlet/ContentServer?pagename=OpenMarket%2FXcelerate%2FSearch%2FEvent>java.net.ConnectException: Tried all: '1' addresses, but could not connect over HTTP to server: '127.0.0.1', port: '7101'
    at weblogic.net.http.HttpClient.openServer(HttpClient.java:333)
    at weblogic.net.http.HttpClient.openServer(HttpClient.java:425)
    at weblogic.net.http.HttpClient.New(HttpClient.java:252)
    at weblogic.net.http.HttpURLConnection.connect(HttpURLConnection.java:189)
    at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:374)
    at weblogic.net.http.SOAPHttpURLConnection.getInputStream(SOAPHttpURLConnection.java:37)
    at java.net.URL.openStream(URL.java:1010)
    at COM.FutureTense.Util.ftUtil._readFromInputStream(ftUtil.java:826)
    at COM.FutureTense.Util.ftUtil.readByteURL(ftUtil.java:730)
    at COM.FutureTense.Util.ftUtil.readURL(ftUtil.java:696)
    at COM.FutureTense.Platform.SystemEvents.RequestEventItem.execute(RequestEventItem.java:58)
    at COM.FutureTense.Platform.SystemEvents.AbstractEventItem.run(AbstractEventItem.java:170)
    at COM.FutureTense.Platform.SystemEvents.FileSystemBasedClusteredEventExecutor$LockingCallable.call(FileSystemBasedClusteredEventExecutor.java:232
    at COM.FutureTense.Platform.SystemEvents.FileSystemBasedClusteredEventExecutor$LockingCallable.call(FileSystemBasedClusteredEventExecutor.java:198
    at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
    at java.util.concurrent.FutureTask.run(FutureTask.java:138)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
    at java.lang.Thread.run(Thread.java:662)
    <Protocol> <setPropertiesInternal> down_thread was deprecated and is ignored
    <Protocol> <setPropertiesInternal> up_thread was deprecated and is ignored
    .....

    If WCS is indeed installed on http://localhost:7101 and it can't see http://127.0.0.1:7101 then you should check to see if there is any restriction on the app server, OS, or firewall (though these requests probably aren't leaving the box) that could be preventing requests of this sort. You're seeing the event engine trying to talk to the event host.

  • Error starting the Application Server and Deployment Tool

    After installing the iPlanet Aplication Server with sp3 I get the following
    errors starting the Application Server and Deployment Tool.
    iAS Application Server
    ================
    GXBindInit: GXBindBasic failed
    GXContextInit: GXBindInit failed 2
    [26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
    ContextModule.createContextInit failed:
    error: could not get context
    *** Errors in initialization from registry ***
    Errors in initialization, exiting ...
    iAS Deployment Tool
    ===============
    GXBindInit: GXBindBasic failed
    GXContextInit: GXBindInit failed 2
    [26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
    ContextModule.createContextInit failed:
    Exception in thread "main" java.lang.NullPointerException
    at com.kivasoft.util.Util.loadComponent(Unknown Source)
    at
    com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
    at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
    Source)
    Can anyone help me please!

    Hi,
    Would be more helpful if you can mention, the O/S. Also, pls mention where
    you are getting this error, at kjs or kxs, or, are you able to start the server
    and at which specific instance do you encounter this.
    Regards
    Raj
    "Antonio Casqueiro" wrote:
    After installing the iPlanet Aplication Server with sp3 I get the following
    errors starting the Application Server and Deployment Tool.
    iAS Application Server
    ================
    GXBindInit: GXBindBasic failed
    GXContextInit: GXBindInit failed 2
    [26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
    ContextModule.createContextInit failed:
    error: could not get context
    *** Errors in initialization from registry ***
    Errors in initialization, exiting ...
    iAS Deployment Tool
    ===============
    GXBindInit: GXBindBasic failed
    GXContextInit: GXBindInit failed 2
    [26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
    ContextModule.createContextInit failed:
    Exception in thread "main" java.lang.NullPointerException
    at com.kivasoft.util.Util.loadComponent(Unknown Source)
    at
    com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
    at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
    Source)
    Can anyone help me please!

  • Error starting the Application Server and Deployment Tool in Windows 2000

    After installing the iPlanet Aplication Server with sp3 in Windows 2000 I
    get the following
    errors starting the Application Server and Deployment Tool.
    iAS Application Server
    ================
    GXBindInit: GXBindBasic failed
    GXContextInit: GXBindInit failed 2
    [26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
    ContextModule.createContextInit failed:
    error: could not get context
    *** Errors in initialization from registry ***
    Errors in initialization, exiting ...
    iAS Deployment Tool
    ===============
    GXBindInit: GXBindBasic failed
    GXContextInit: GXBindInit failed 2
    [26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
    ContextModule.createContextInit failed:
    Exception in thread "main" java.lang.NullPointerException
    at com.kivasoft.util.Util.loadComponent(Unknown Source)
    at
    com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
    at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
    Source)
    Can anyone help me please!

    Okay, pls check that you are logged in as administrator and installed and now you are logged in as administrator and registering the iAS server. Did you get any installation failures while installing and are you able to register the server using iASAT ?

  • Tracing error log in Application Server for report service

    Hi guys,
    My company use Oracle Application Server with the Form version 10.1.2.0.2.
    Recently we experienced an error whereby the report services go down so frequent within a day.
    I checked into the alert log file of the Database and found out ORA-00600: internal error code, arguments: [kgassg_2], [], [], [], [], [], [], []
    Checked in Metalink, this might happen in 32 bit OS. So the suggestion is to check on the database memory parameters and extend the memory parameters affected to it.
    Since this report service problem happen quite often, I might think that there should be something happening with the Application server as well.
    Lastly, my questions are:
    1. How can i investigate this error in Application Server side?
    2. Is there any error log file in Application Server which is like alert log file in the database?
    Thank you

    Hi,
    I would like to know Do you want to create a error file in Application server?
    If yes, then it is quite easy. Just declare one internal table IT_LOG & store all the error records in this table.
    Then loop over the internal table IT_LOG & using open data set concept transfer all the records.
    Sample Code:
    INITIALIZATION.
    CONCATENATE '/INTERFACE/' SY-SYSID '/MM' into GV_DIR.
    START-OF-SELECTION.
    CONCATENATE GV_DIR '/' P_FILE INTO GV_FILE.
    OPEN DATASET GV_FILE FOR OUTPUT IN TEXT MODE.
    LOOP AT IT_LOG.
    CLEAR LV_STRING.
    CONCATENATE IT_LOG-F1 IT_LOG-F2 INTO LV_STRING SEPERATED BY ','.
    TRANSFER LV_STRING TO GV_FILE.
    ENDLOOP.
    CLOSE DATASET GV_FILE.
    Note: Here F1 & F2 are respective fields.

  • Got Error when creating application server connection

    Hi Guys...I am using SOA 10.1.3.1.0
    I got the following error when creating application server connection
    In Step 1:
    I selected the Connection type as Standalone OC4J 10.1.3 (Why because I use this one)
    In Step 2:
    In this step I gave username and password (same username and password to connect to BPEL console)to authenticate connection
    In step 3:
    It is asking for Hostname, RMI port and URL path. My computer name is gopal-computer. I gave this hostname. RMI port number is 23791 by default. I kept this one as it is and URL path optional I think. I did not give any thing.
    In step 4:
    When I hit the test connection button its giving the following error
    Error while getting remote MBeanServer for url: ormi://gopal-computer:23791/default:
    Error reading application-client descriptor: Error communicating with server: Connection refused: connect; nested exception is:
         javax.naming.CommunicationException: Connection refused: connect [Root exception is java.net.ConnectException: Connection refused: connect]
    Please help me.
    Thanks,
    Gopal.....

    For SOA Suite connection you should choose "Oracle application server 10g 10.1.3"

  • Error in starting application server SAP Netweaver ABAP Trial version

    After starting the application server on my Windows Vista system, i'm getting next error :
    ===================================================
    ============== Starting System NSP ================
    ===================================================
    =============== Starting database instance ...
    The service name is invalid.
    More help is available by typing NET HELPMSG 2185.
    The MaxDB Database Starter, Version 7.7.04.23
    Copyright 2000-2008 by SAP AG
    Error! Connection failed to node (local) for database NSP:
    -24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
    -24701,ERR_EXHNDLR: Could not initialize exception handler.
    -24748,ERR_FILEOPEN: Error opening file C:\sapdb\data\wrk\dbmsrv_ACN7440R8FCGNN.
    err
    -24826,ERR_NIERROR: Can not open file 'C:\sapdb\data\wrk\dbmsrv_ACN7440R8FCGNN.e
    rr'. (System error 5; Access is denied.)
    Error: Error while calling dbmcli
    "C:\sapdb\programs\pgm\dbmcli"  -d NSP -u , db_online
    ============== Start database failed !
    Press any key to continue . . .
    Any suggestions to solve this ?
    regards,
    Hans

    May I ask what you mean by "first start Windows services related to MaxDB" ?
    I have what I believe is very a similar problem.
    Only the MessageServer starts in sapmmc. The Dispatcher soon stops and I then get the message
    "C:\SAP\NSP\DVEBMGS00\work>set DBNAME=NSP
    C:\SAP\NSP\DVEBMGS00\work>if "" == "" (set DB_USERKEY="c" )  else (set DB_USERKEY="c_J2EE" )
    C:\SAP\NSP\DVEBMGS00\work>dbmcli -U "c" db_state  1>adatmp
    C:\SAP\NSP\DVEBMGS00\work>findstr "ONLINE" adatmp
    C:\SAP\NSP\DVEBMGS00\work>dbmcli -U "c"  dbm_version VERSION   1>adatmp
    C:\SAP\NSP\DVEBMGS00\work>findstr "7\.2" adatmp
    C:\SAP\NSP\DVEBMGS00\work>findstr "7\.3" adatmp
    C:\SAP\NSP\DVEBMGS00\work>findstr "7\.4" adatmp
    C:\SAP\NSP\DVEBMGS00\work>findstr "7\.5" adatmp
    C:\SAP\NSP\DVEBMGS00\work>findstr "7\.6" adatmp
    C:\SAP\NSP\DVEBMGS00\work>findstr "7\.7" adatmp
    Error: Database NSP NOT started !"
    in C:\SAP\NSP\DVEBMGS00\work\stderr0.
    The best I can get is that the disp+work.EXE Dispatcher is "Running, Message Server connection, OK, Dialog Queue time: 0.00 sec" after starting in sapmmc but it stops after 1:15 with the above message.
    Most grateful for any suggestions.
    Edit : I now have instead of the above
    C:\SAP\NSP\DVEBMGS00\work>findstr "ONLINE" adatmp
    ONLINE
    Database NSP successfully started !
    but still the Dispatcher stops afer 1:15.
    I now find the message that the system cannot find a file that I see is in fact present under the path given in the message:
    ERROR => DlLoadLib: LoadLibrary(C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll) Error 126 [dlnt.c       241]
    M          Error 126 = "Das angegebene Modul wurde nicht gefunden."
    which puzzles me.

  • Error While creating Application server connection

    Hi ,
    I am a newbie to SOA suite . I have installed Oracle XE Database , Oracle Jdeveloper 10.1.3.3.0.3 and Oracle SOA Suite 10g (10.1.3.1) ( file name soa_windows_x86_
    101310_disk1.zip) on my windows XP machine
    Now I created a "Hello World Bepel Process '" . For deploying it I was trying to create an application server connection . I am not sure that I need to install anymore things or not .
    Here are the steps which happened while I was trying to make connection to application server.
    1> Connection Name : Gave as "AppServerConnection1"
    Connection Type as "Standalone OC4J 10g 10.1.3"
    2> UserName as : oc4jadmin
    Password : Gave my password
    3> Hostname : localhost
    RMI Port was coming as 23791 as default ( Please note that I checked opmn folder and tried to use the RMI from the xml file too)
    4> While testing I was getting error as "For input string: "23791home"
    Not sure if i need to install anything ( Probably Application Server ) more .
    Please let me know what I need to do and if i need to install anything else where will I find the file ?
    Thanks in advance

    Hi,
    Connection Type as "Standalone OC4J 10g 10.1.3"
    When choosing the connection you need to select the connection as Oracle Application Server 10.1.3 not Standalone OC4J 10g 10.1.3

  • Error message from Application Server

    Hi All,
    Is it possible to capture a descriptive error message from the Application server when we try to transfer a file from SAP and it does not get written to the application server.
    I know it is possible to catch the standard catchable runtime exceptions, but I also would like to know if the file transfer fails in any other conditions which do not result in runtime dumps, nevertheless I should be able to get the error message.
    Thanks in advance,

    hi,
    it is not possible to find the run time errors in application server while writing the file.using sy-subrc only we can find out. where it is writing correctly like this.
    we can see all the application server files in this Tcode: AL11

  • How to handle the error in Oracle9i Application Server?

    After installing the Oracle9i Application Server ,Oracle8i 1.7 Database,I visit the link"http://localhost" ,then click "Jsever (demo)". Then ,there appears "500 Internal Server err".
    The log file:
    mod_jserv.log
    [24/01/2002 09:25:32:031] (EMERGENCY) ajp12: connection fail
    [24/01/2002 09:25:32:031] (ERROR) an error returned handling request via protocol "ajpv12"
    Please help me.Any help appreciated!

    After installing the Oracle9i Application Server ,Oracle8i 1.7 Database,I visit the link"http://localhost" ,then click "Jsever (demo)". Then ,there appears "500 Internal Server err".
    The log file:
    mod_jserv.log
    [24/01/2002 09:25:32:031] (EMERGENCY) ajp12: can not connect to host 127.0.0.1:8007
    [24/01/2002 09:25:32:031] (EMERGENCY) ajp12: connection fail
    [24/01/2002 09:25:32:031] (ERROR) an error returned handling request via protocol "ajpv12"
    Please help me.Any help appreciated!

  • Error when starting application server

    after installation of SAP NetWeaver 7.01 ABAP Trial Version on windows Vista, i got the following error when I try to start the application server:
    The MaxDB Database Starter, Version 7.7.04.23
    Copyright 2000-2008 by SAP AG
    Error! Connection failed to node (local) for database NSP:
    -24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
    -24832,ERR_SHMNOTAVAILABLE: Shared memory not available
    -24827,ERR_SHMALLOCFAILED: ID C:\sapdb\data\wrk\NSP.dbm.shi, requested size 2560
    Error: Error while calling dbmcli
    "C:\sapdb\programs\pgm\dbmcli"  -d NSP -u , db_online
    ============== Start database failed !
    could anyone help?
    kind regards
    Andreas

    I successfully installed SAP NetWeaver 7.01 ABAP Trial Version on Vista home edition.  I was able to start the application server by following the steps outlined by Marcelo Ramos at the following link:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0c0bdf1-3440-2b10-db8a-ae16f614745d
    I hope this helps someone else as well.
    Barbara

  • Error starting Oracle Application server

    Hi I installed Oracle application server 10g. I successfully installed it. But when i stopped the opmn and emctl process and now when i am trying to start i am able to successfully start but when i type the URL of OAS Admin console. I get following error:
    500 Internal Server Error
    java.lang.NoClassDefFoundError: oracle/sysman/eml/app/Console     at java.lang.Class.forName0(Native Method)     at java.lang.Class.forName(Class.java(Compiled Code))     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpApplication.loadServlet(HttpApplication.java:2283)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpApplication.findServlet(HttpApplication.java:4795)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2821)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:680)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)     at java.lang.Thread.run(Thread.java:568)
    Can any one please help me resolve this issue at the earliest?

    Hi,
    Now I'm just thinking with U because error 500 can be result of different reasons. I think (I'm not sure)at this situation it has to do with java version.
    AIX 5.3 has java version 1.4.2. .
    Would U like to go $ORACLE_HOME\jdk\jre\bin\ then just type ./java -full version or java version.
    Which result U 'll get.
    also type in which java
    moreover can U give me the output of the env command.
    the last step before U start any as process just do the following
    ps -ef | grep (owner of your as)
    if U 'll find any process just kill it kill -15 process id if it does not help then hard kill with -9
    try to set your environement variable well then start your opmn components again per-process to see which process is going wrong.
    Let me know,
    Regards
    Hamdy

  • Error while configuring application server in Jdev 11g

    Hi all,
    I am trying make connection to application server in Jdev 11g.
    While testing the connection i am facing the below error.
    Testing JSR-160 Runtime ... failed.
    Cannot establish connection.
    Testing JSR-160 DomainRuntime ... skipped.
    Testing JSR-88 ... skipped.
    Testing JSR-88-LOCAL ... skipped.
    Testing JNDI ... skipped.
    Testing JSR-160 Edit ... skipped.
    Testing HTTP ... failed.
    Unable to open conection: Connection timed out: connect
    Testing Server MBeans Model ... skipped.
    Testing HTTP Authentication ... failed.
    Unable to open conection: Connection timed out: connect
    0 of 9 tests successful.
    The Port which i am using is 45701. Any pointers on this?

    Hi
    You can find the SSL port of the Admin Server using the Admin Console (eg, http://localhost:7001/console).
    Environment -> Servers
    Click AdminServer(admin)
    SSL Listen Port: 7002 (default).
    You should check the "SSL Listen Port Enabled" check box to connect to this admin server with ssl port.
    For your informationWhen you configure the Application Server Connection from the JDeveloper, you need to check the 'Always use SSL' check box and enter the SSL port. You can create the Application Server Connection for your sSSL port from the JDeveloper.

  • Error in Oracle Application Server (export) Version 4.0.7.0 ON Windows NT

    Hi all,
    I am trying to install Oracle Application Server (Export) Version 4.0.7.0.0 for Windows NT on Windows NT 4.0 SP1.At the time of installation every thing goes smooth but when i try to connect to the specified database which is in the same network(LAN) of the machine it says tns could not resolve the service name and after that i did the tns entry in the tnsnames .ora file but it is givin the same issue i then tried to ping the server its giving reply i even see the installed poduct it is showing that net8.0 is installed what would be the problem i am not able to identify .
    Following is the commach which i am firing to test the connection
    1) start > run >cmd
    2) command prompt opens then in that i type the command
    exp80 scott@testit asks for passowrd i enter the password
    then after some time the tns error comes
    The home for this d:\orant1
    Now after that i installed oracle 8i client release 8.1.5 on the same machine to check weather this problem is machine dependent,after the full installation and doing the tns entry i tryiid to connect thruoug sql plus (which got istalled which this installer) its working fine.
    The home for this d:\orant
    My main aim is to user the Expot Utility to take the export test database objects.
    Thnks in Advance

    Hi,
    you have a database version 10.2.0.1.0, but SOA needs 10.2.0.2 or higher. Update your database using the latest patchset.
    Regards,
    Tomas

  • Error in installing Application server

    Hi all,
    I am trying to install application server for the first time. while installing I am getting the error in the REGISTER with Internet directory screen,
    It has two fields to enter
    1. HOST : I assume machine name in which the S/w is getting installed
    2. PORT : Please tell me the port number which I have to enter here?
    Ther version I am trying to intall is,
    APPLICATION SERVER 10g (10.1.2.0.2)
    One more doubt,
    Is Oracle map viewer is available with APPLICATION SERVER 10g (10.1.2.0.2)??
    Please help
    -Thanks & Cheers
    Antony

    Hi Antony
    Would you please post your question in that section of this forum ?
    Forum Home » Application Server » Oracle Application Server - General
    Expert of Oracle Application Server are willing to help you.
    Thanks

Maybe you are looking for