Error in ise for a embedded processor system

Hello,
I added a .xmp file from xps to ISE-14.2 , it is having a peripheral attached with the microblaze.
While translating it is giving error like :
ERROR:EDK - :EDK:4110 - IPNAME: mesh3, INSTANCE: mesh3_0 - cannot find MPD for
the
pcore 'mesh3_v1_00_a' in any of the repositories -
C:\Users\mnit\Documents\noc\final_noc\system.mhs line 523
version not verified on hardware for architecture 'kiERROR:EDK - :EDK:4110 - IPNAME: mesh3, INSTANCE: mesh3_0 - cannot find MPD for
the
pcore 'mesh3_v1_00_a' in any of the repositories -
C:\Users\mnit\Documents\noc\final_noc\system.mhs line 523
Running UPDATE Tcl procedures for OPTION TESTBENCHGEN_SYSLEVEL_UPDATE_PROC...
ERROR: xps 'run memgen' call failed
ERROR: XPS process failed to run memgen.
ERROR: Generating the mem file for block ram initialization for C:/Users/mnit/Documents/noc/final_noc/system.xmp failed.
Please help.
Thank you.

I have seen a similar issue in 13.x and 14.1 version of XPS/ISE.
This is seen because platstudio run targets(including stubgen, memgen, testbenchgen) was not inserting library paths(global, project specific ). But memgen do accepts -lp path, so if running from command line it will work.
Since you are running in ISE flow this may not be an easy workaround.
Can you try open XPS project and select Project options and un-check generate test bench template and see if that helps?
These issues are seen moslty in the design migrated from older version to the newer version.
Regards,
Achutha

Similar Messages

Error when checking for layout in sap system.

Hi,
   We have downloaded the Adobe Life Cycle Designer 8.0 from service.sap.com.As in our system we have already installed the SAP GUI ,we only run the ALDsetup. exe to install the Adobe Life Cycle Designer 8.0 .When we checked in our backend SAP system in t-code SFP-> Select form-> Display ---> Layout ,then it is giving error below.
Error :
Error while opening document
Message no. SOFFICEINTEGRATION143
Diagnosis
An error occurred in the desktop application while opening a document.
Procedure
Check first whether you can insert a document from this desktop application as an embedded object in another application. The necessary menu item is usually 'Insert --> Object'. The application then lists all of the OLE document types. Choose the type corresponding to the desktop applciation. If the insertion fails, the error is in the desktop application itself.
This error has various causes. Often, it is caused by activating certain add-ins. Sometimes, the desktop application is wrongly installed. The error should not recur once you have disabled any add-ins or reinstalled the desktop application.
Procedure for System Administration
If you cannot solve the problem as described above, enter a problem message. There are notes relating to how to generate the log file using the program SAPROFFICEINTEGRATIONTRACE.
Please check it & reply to it soon.
Regards
Nilesh

Hi Nilesh,
Refer the Below links, may be you will get some ideas,
http://help.sap.com/erp2005_ehp_04/helpdata/EN/45/2fbd67361003c3e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/2c/241a427ff6db2ce10000000a1550b0/content.htm
Refer the Notes:
886572            ADS: Central Patch Note for SAP NetWeaver 7.0
834573            SAP Interactive Forms by Adobe: Acrobat/Adobe Reader Version
894009            Adobe document services: Configuration Guide (NW 7.0)
By
Parthi

Error in job for connection to CUA System

I have a problem with the two jobs in the u2018AS ABAP - Initial loadu2019 for a CUA system. According to the log is seems to be a memory issue!!!!
Extract from the logfile:
u2026u2026u2026
26.03.2009 09:57:31 :I:Initializing custom pass FromSAP: ReadABAPRoles
26.03.2009 09:57:31 :I:Initializing MX SAP BAPI object
26.03.2009 09:57:31 :W:Filter not supported when Listing CUA Roles. Ignoring :*
26.03.2009 09:57:35 :E:Unhandled Error in DSERuntime
java.lang.OutOfMemoryError: Java heap space (failed to allocate 84038672 bytes)
u2026u2026u2026
This error is related to the both the jobs: ReadABAPRoles and ReadABAPProfiles.
Please note:
Setting the %$rep.CUA_MASTER% equal u2018falseu2019 using the repository constant works for the both jobs (only the roles and/or profile in u2018localu2019 system the is read meaning no data from the subsystems in the CUA is read )
Any suggestions for handling this problem??
Best Regards
Tom Svarre

The text you enter in the dispatcher script after JAVAOPTIONS= is passed on as one parameter to the java executable. When you set JAVAOPTIONS=-Xmx256M -Xmx256M the effect is like the commandline java "-Xmx256M -Xms256M" java interprets this as an illegal heap size and refuses to start.
If you want to specify more than one javaoption, you also have to set MXDISPATCHER_EXECSTRING=1
This option causes the dispatcher to pass the arguments to the java executable as one string instead of split into separate parameters.
The reason this option is not turned on by default, is that this can cause problems with paths and parameters containing special characters that causes the command line interpreter to fail.
In your case, only specifyng the -Xmx is probably the best solution. Specifying -Xms will cause heavier load on the system also for jobs thatdoes not need a large heap.

May LV for Linux run in embeded linux system with ARM9 ?

Hello All,
May LV for Linux run in embeded linux system with ARM9 ?
Tks and best regards!
Bright

No, it will only run on Intel compatible processors.
You'll need LV Microprocessor SDK for that (AKA LVEmbedded). But you'll lose
the MMI. And you need to build toolchains yourself (although there is a
cygwin example shipped, and converting it to any gcc toolchain is not that
difficult).
There is a special LV MSDK for ARM processors, but not for all of them.
Regards,
Wiebe.

Error while Installing the Java Add-In for an Existing ABAP System

Hi all,
I need help, i am Installing the Java Add-In for an Existing ABAP System
SAPInst stops on the first installation step: "Central Services Instance (SCS) Java Add-In", the step is "Install common system files" on the following sub-steps:
These are the last few lines on the sapinst.log.
INFO 2009-05-21 12:35:12
Execute step createAccounts of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:18
Execute step setUserEnvironment of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:19
Execute step InstallJDBCDriver of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_JDBCDriver_DB4|ind|ind|ind|ind|4|0.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc\tbx.
INFO 2009-05-21 12:35:21
Copied file 'V:/QIBM/ProdData/HTTP/Public/jt400/lib/jt400.jar' to 'V:/sapmnt/BIQ/jdbc/tbx/jt400.jar'.
INFO 2009-05-21 12:35:22
Execute step updateNtPatchDlls of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
INFO 2009-05-21 12:35:23
Execute step sCreateSystemOS4 of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
FCO-00011 The step sCreateSystemOS4 with step key |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0|sCreateSystemOS4 was executed with status ERROR .
Thanks in advance for any help.
Kiran Chebrolu

Hi,
Hope this note would solve your issue, please read carefully and validate with your issue
Note 1032019 - Java Add-In: Error when you create the SCS instance
below notes give your suffice information.
Note 883948 - NW 7.00(2004s): Inst.Add.Java Usage Types/Software Units
Note 1268493 - NW 7.01/BS 7: Inst.Add.Java Usage Types/Software Units
Note 1025789 - RUNR3CMD generates CPF0006
regards
nag

Error while reading ID of own business system from the SLD for system D18

Dear guru's,
I have almost completed a file2proxy scenario but I'm stuk on the following.
When sending a message the outbound adapter says:
<b>Error while reading ID of own business system from the SLD for system D18 and client 200</b>
What's the problem? I'm using a HTTP connection in the comm. channel. In this http connection a user with SAP_ALL is defined.
Any suggestions?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>D18</SAP:P1>
<SAP:P2>200</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading ID of own business system from the SLD for system D18 and client 200</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Login to system D18 and client 200 and check the TC SLDCHECK and also as per my pervious message check the entries in the SLDAPICUST, it should point to the Server on which SLD is present usually XI server https.
Actually what happens in this error is when you are done with the configuration part in the ID, you are trying to eceute the scenario File to proxy, when it comes to identify the receiver system which is D18 clnt 200, it goes to SLD to check it and SLD is trying to ping to the machine D18 this connection is set from the TC SLDAPICUST on the machine D18.
here the problem is that either the D18 is not able to ping to the SLD and also try refreshing the SLD cache.
Hope you problem is fixed

Error while reading ID of own business system from the SLD for system DPI

Hi All,
My sceanrio is Proxy to JDBC. and its B2B. am sending the data from BI system and based on the country field from the source, table is decided and value is updated in the table.
In RWB->Component Monitoring->Adapter Engine->Test Message, I have given the Sender component,Receiver Party,Receiver component,Interface,Interface Namespace,userid and password,Quality of Service and pasted the payload.
Now I am getting the error :Error While Sending Message: Error stack from response: Error while reading ID of own business system from the SLD for system DPI and client 001 Internal error in Landscape Directory
Please help me out.
Thanks
Kiruthi
Edited by: kiruthiga balusamy on Nov 24, 2009 4:02 PM

Hi,
Check transaction SLDAPICUST for correct SLD configuration.
http://help.sap.com/saphelp_nw70/helpdata/EN/0b/8512417301ee6fe10000000a1550b0/content.htm
~Sanv...

Any solution for Windows 8.1 System Image Backup on DVD fails with error 0x80040154??(apart taking backup in external drive)

Windows 8.1 is facing a problem while taking System Image Backup on DVD, it pops an error saying 0x80040154 and more it says that class is not registered , i am trying from days to find some optimum solution for it apart from taking it on external
hard drive...any suggestion please let me know asap!
regards!

Hi,
Check this article first:
0x80040154 error may occur when you create a system image backup in Windows 8.1
http://support.microsoft.com/kb/2934165/en-us
Please capture the system event during you reproing this issue by using Process monitor:
Process Monitor v3.05
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
If there is any Access denied error, follow this blog to solve this issue.
Solving Access Denied Errors Using Process Monitor
http://improve.dk/solving-access-denied-errors-using-process-monitor/
You can also upload the saved log file here for our research. Please upload them to a file sharing service like Skydrive or "Rapidshare" and put a link to them in your reply.
Kate Li
TechNet Community Support

0xc0000001 error & i have no repair disk for win 8.1 - system will not repair itself

0xc0000001 error & i have no repair disk for win 8.1 - system will not repair itself happened after microsoft updates

Boot your computer into Safe Mode usually by tapping the F8 key at boot. Select Safe Mode with Command Prompt.
From there type rstrui.exe and select a Restore Point prior to the time the problem started.
If unable, you will have to perform a Factory Restore.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

HT3275 Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image "/Volumes/Data/Anthony's iMac.sparsebundle" could not be accessed (error -1). Why? They computer system is up to da

Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image “/Volumes/Data/Anthony’s iMac.sparsebundle” could not be accessed (error -1). Why? The computer system is up to date and I have had no issue with the other computers, just this one.
Many thanks
Anthony

Try this Discussion...
https://discussions.apple.com/message/18783684#18783684

Installing Java Add-In for an existing ABAP System -Error SQL compatibility

Hello gurus,
We have a system and it has only the ABAP instance! So my goal is install the JAVA iinstance. In this momment I´m reading the section "4.4.2 Installing the Java Add-In for an Existing ABAP System (Optional)" in installation guide "SAP ERP 6.0 SR3" (ABAP+JAVA). So, I want to install the JAVA instance which is the Java Add-In for an existing ABAP system!
So what I did was followed that instructions on that section in guide!
As you certainly know this process has three sequential phases:
1) Central Services Instance (SCS) Java Add-In
2) Database Instance Java Add-In
3) Central Instance Java Add-In
The first phase - Central Services Instance (SCS) Java Add-In - it already finished with success, but I´m faccing with a weird error in second phase Database Instance Java Add-In when I entered all required input parameters, SAPinst shows an error that says:
The database PRD has the wrong compatibility level. The database used for the installation of an SAP system must have compatibility level: 80 for MS SQL Server 2000 90 for MS SQL Server 2005 SOLUTION: See the MS SQL Server documentation on how to set the compatibility level for a database.
I don´t know what´s happen, in fact my database is an SQL Server 2008 (100), but I already change it at management studio, the compatibility level to MS SQL Server 2005, but still the error remains!!! I also tried to ran again the sapinst process, I restarted it but it still show me this error!!
Can you tell me why and how can I solve this problem?
Best regards,
João Dimas - Portugal

Hello Sunny,
I still have this error... I don´t know what do to more for this situation!
I found one not which report this error of compatibility - Note 1152240 - Setting Up Microsoft SQL Server 2008 (R2) - in chapter "VII TROUBLESHOOTING" which said to follow the instructions in chapter III - "Installing SAP systems based on SAP NetWeaver 7.0 SR3".
When I read this last chapter (III) it tell us to do:
If you want to install an SAP system based on SAP NetWeaver 7.0 SR3 on SQL Server 2008, you cannot use the Installation Master and Kernel DVD that you received from SAP or downloaded from SAP Service Marketplace. Instead, you have to do the following:
Patch your runtime libraries by applying the procedure that is described in note 684106 for your release and machine architecture.
Use a modified Installation Master DVD
For more information, see section "VI PROCEDURES" -> "Creating a modified Installation Master DVD".
Use a modified Kernel DVD
For more information, see section "VI PROCEDURES" -> "Creating a modified Kernel DVD".
I did everything that is said in the note (except the "Creating a modified Kernel DVD") because I can not access to the note 1480785 (it say: "The requested SAP Note is either in reworking or is released internally only")
Can you help me... can you guide me... please!?
Best regards,
João Dimas - Portugal

Format Error : mkfs.ocfs2 1.2.7 file system too small for a journal

Hi All,
I am trying to implement Oracle 10g RAC on my laptop using vmware and openfiler software . But while executing the command
#mkfs.ocfs2 -b 4K -C 32K -N 4 -L oracrsfiles /dev/iscsi/crs11/part1
I am getting the error
Format Error : mkfs.ocfs2 1.2.7 file system too small for a journal
Please anybody can help me to resolve this problem.
Thanks in Advance.

How large is the device that you are formatting?
The default journal size depends on the type specified. If none specified,
then it assumes "mail" which sets the default journal per slot to 256M.
If database type, default is 64M.
Use "-T database" to specify database type, etc.
BTW, one can always override the defaults. Say "-J size=16M" to make
a smaller journal.
man mkfs.ocfs2 and the user's guide has more.

Error: - No service for system port, client in Integration Directory

Hi
In Idoc to File scenario, My Idoc 've been successfully send from the sender system.
but its neither getting displayed in the SXMB_PATH nor saved in the specified path.
I checked in SM58 in R3 that RFC user has access to send data to XI. But it showing below Error:_
ERROR:-
No service for system Sender Port (SAPDEV) client sender client (300 ) in Integration Directory
Please do the needful
Thanks,
Anshul

Hi Anshul,
Go to:
TCODE SXMB_ADM -> Integration Engine Configuration
Please change the system rile to be "Application System", then retest if the similar issue happen again after that.
If not helped, follow:
1. Clear SLD Delta Cache Referesh in the Integration Directory
2. Open the Business System in edit mode and select Adapter specific identifiers following the menu path:
Service -> Adapter Specific Identifiers
3. Please click in the button next to "Apply" button to pick up the Logical system from SLD.
Regards,
Caio Cagnani

I'm running Mac OS X version 10.6.8 How come I get this error message "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." When I Try to download a FREE trail?

I'm running Mac OS X version 10.6.8 How come I get this error message "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." When I Try to download a FREE trail?

Hi Brizill,
Please refer to the help document below to understand the technical specifications for the same:
System requirements | Photoshop
Regards,
Sheena

Receiving error message "Login failed for user 'NT AUTHORITY\SYSTEM'" every minute on server which is the mirror

Hello,
I have 2 SQL Server 2008 R2 machines that are configured with database mirroring (using certificates as authentication), there is no witness configured. My issue is that the mirror server is receiving at least one of the below pared messages every
second and filling up my sql error log quickly.
SYSTEM is the service account user for the MSSQLSERVER service.
[298] SQLServer Error: 4060, Cannot open database "<databasename>" requested by the login. The login failed. [SQLSTATE 42000]
[298] SQLServer Error: 18456, Login failed for user 'NT AUTHORITY\SYSTEM'. [SQLSTATE 28000]
The database has a status of: Affected database state is: Mirror, Synchronized/Restoring...
When I checking the database mirror monitor, it shows that its mirroring ok and everything has green checkboxes.
Is there a way to stop all these errors being logged, I'm assuming this isn't normal.
Marcus

Yes i have faced the same issues and tried everything and nothing was using this account, system was ended up with creating few GB's sql error log files everday.. and finally i had two options, 1 -- Rebuild the instance completely 2. Change the SQL Server
Audit settings to Only successful logins and restart the instance.. ( May be your current sql server level Audit setting is set to Failed & Successful logins..
Remeber my server was a DR so I have changed the SQL Server Audit settings to only Successful logins.. but production servers we will monitor both... :)
Raju Rasagounder Sr MSSQL DBA

Error in ise for a embedded processor system

Similar Messages

Maybe you are looking for