Error in MIGO while GR reversal - Message no. M7021

Hello MM Sapperu2019s,
I got an error in MIGO as meniotned below,
Deficit of Project stock unr. 2,00 PC : XXXXXXX 9093 1111 Q
Up on checking from my side the issue I observed that while executing GR reversal for the PO in transaction MIGO user is getting the error as Deficit of Project stock unr. 21,00 PC : XXXXXXX 9093 1111 Q because there is no project stock available for the relevant material.This I have checked in MMBE transaction for the respective material, Project stock is missing.
Now I need to know if I want to maintain the project stock for the respective WBS element in MMBE and proceed with reversal of GR in MIGO.Please let me know what action I need to take it to resolve this.
PS: PO qty is 26 and IR made first for qty 1 and then GR made for qty 26.
I have also referred the below link in SDN related to this query,
GRN reverse problem
Where it talks about the material issued document reversal which is relevant to me part from that other actions also required I feel.
Cheers,
Kumar.S

KUMAR.S. wrote:
Hello MM Sapperu2019s,
> I got an error in MIGO as meniotned below,
> Deficit of Project stock unr. 2,00 PC : XXXXXXX 9093 1111 Q
> Up on checking from my side the issue I observed that while executing GR reversal for the PO in transaction MIGO user is getting the error as Deficit of Project stock unr. 21,00 PC : XXXXXXX 9093 1111 Q because there is no project stock available for the relevant material.This I have checked in MMBE transaction for the respective material, Project stock is missing.
> Now I need to know if I want to maintain the project stock for the respective WBS element in MMBE and proceed with reversal of GR in MIGO.Please let me know what action I need to take it to resolve this.
> PS: PO qty is 26 and IR made first for qty 1 and then GR made for qty 26.
> I have also referred the below link in SDN related to this query,
> GRN reverse problem
> Where it talks about the material issued document reversal which is relevant to me part from that other actions also required I feel.
> Cheers,
> Kumar.S
Hi,
first u have to reverse the transfer posting (if it is applicable) are directly u can reverse the GI after that u can cancel gr.
u can check the stock in mmbe for every transaction's.
may be it is helpful for u.
Regrds
Raj.

Similar Messages

Error in MIGO while doing Intracompnay plant to depot by STO

Dear gurus,
I am facing an error while posting MIGO during intra-company plant to plant STO.
Settings for STO:
SPRO >IMG > MM >Purchasing > Purchase Order>set up Stock Transport Order
Define Shipping Data
Define/assign Checking rule
Assign Delivery Type
Assign Doc type
I have maintained the following pre-requisite master data
1. Supplying/Receiving plants are created as customer/vendor master
2. Excise details (customer/Vendor/Plant) data are maintained in J1ID
3. Assessable value is entered in J1ID
Process flow:
1. ME21n - Create STO (PO type:UB)
2. VL10B - Create Outbound Delivery
3. VL02N - PGI
4. VF01 - Create Pro-forma Invoice (Stock Transfer Invoice)
5. J1IIN - Post Excise Invoice
at the receiving Plant
6. MIGO-Post Goods Receipt.
After entering the excise invoice and clicking on CHECK button in MIGO, the following errors are appearing
1. Excise Details are not maintained for Vendor .-Message no. 8I565
2. Maintain Vendor for the excise invoice -Message no. 4F185
3. Please check excise base for the item is zero ! -Message no. 4F121
Please reply your valuable suggestions.
Regards,
Anbu

Dear,
1. Excise Details are not maintained for Vendor .-Message no. 8I565
   Kindly maintain Excise Indicator for Vendor in TCODE-J1ID
2. Maintain Vendor for the excise invoice -Message no. 4F185
     Kindly maintain Excise Indicator for VENDOR in J1ID
3. Please check excise base for the item is zero ! -Message no. 4F121
     As excise in calculated on Base amount for Item so need to maintain Pricing for item then only it will be able to calculate
or if u dont want to item not to be relevent for pricing then make Excise condition type as manual an maintain it manually .
Regards
AJIT K SINGH
HAPPY TO HELP U

Error in MIGO while stock transfer from plant to Depot - Intra-company

Dear gurus,
I am facing an error while posting MIGO during intra-company plant to plant STO.
Settings for STO:
SPRO >IMG > MM >Purchasing > Purchase Order>set up Stock Transport Order
Define Shipping Data
Define/assign Checking rule
Assign Delivery Type
Assign Doc type
I have maintained the following pre-requisite master data
1. Supplying/Receiving plants are created as customer/vendor master
2. Excise details (customer/Vendor/Plant) data are maintained in J1ID
3. Assessable value is entered in J1ID
Process flow:
1. ME21n - Create STO (PO type:UB)
2. VL10B - Create Outbound Delivery
3. VL02N - PGI
4. VF01 - Create Pro-forma Invoice (Stock Transfer Invoice)
5. J1IIN - Post Excise Invoice
at the receiving Plant
6. MIGO-Post Goods Receipt.
After entering the excise invoice and clicking on CHECK buttin in MIGO, the following errors are appearing
1. Excise Details are not maintained for Vendor .-Message no. 8I565
2. Maintain Vendor for the excise invoice -Message no. 4F185
3. Please check excise base for the item is zero ! -Message no. 4F121
Please reply your valuable suggestions.
Regards,
Anbu

Hi Anbu,
You have created the same thread in other forum also. please continue to interact other forum.
Please do not create the same question in different forums.
Kind regards,
Ramana

Error in MIGO while doing Intra-company plant to depot stock transfer by ST

Dear gurus,
I am facing an error while posting MIGO during intra-company plant to plant STO.
Settings for STO:
SPRO >IMG > MM >Purchasing > Purchase Order>set up Stock Transport Order
Define Shipping Data
Define/assign Checking rule
Assign Delivery Type
Assign Doc type
I have maintained the following pre-requisite master data
1. Supplying/Receiving plants are created as customer/vendor master
2. Excise details (customer/Vendor/Plant) data are maintained in J1ID
3. Assessable value is entered in J1ID
Process flow:
1. ME21n - Create STO (PO type:UB)
2. VL10B - Create Outbound Delivery
3. VL02N - PGI
4. VF01 - Create Pro-forma Invoice (Stock Transfer Invoice)
5. J1IIN - Post Excise Invoice
at the receiving Plant
6. MIGO-Post Goods Receipt.
After entering the excise invoice and clicking on CHECK button in MIGO, the following errors are appearing
1. Excise Details are not maintained for Vendor .-Message no. 8I565
2. Maintain Vendor for the excise invoice -Message no. 4F185
3. Please check excise base for the item is zero ! -Message no. 4F121
Please reply your valuable suggestions.
Regards,
Anbu

Please dont post the same question in multiple forums. Continue in one thread
thanks
G. Lakshmipathi

Error in debatching while sending the message

Why the following error occured while using debatching after muncheain grouping
There was a failure executing pipeline "Microsoft.BizTalk.DefaultPipelines.XMLReceive". Error details: "Finding the document specification by message type "http://Microsoft.LobServices.Sap/2007/03/Idoc/3/ACC_DOCUMENT03//701/Sends#Send"
failed. Verify the schema deployed properly. ".
Prakash

Hi Prakash,
Have you deployed the document schema?
Go to BizTalk Admin Console --> Applications --> All Artifacts --> Schemas and check if the schema is deployed (also make sure there is only one entry for it)
If yes then take a look at the suspended message, and make sure it has a root node and target namespace that matches a schema that is deployed.
Maheshkumar S Tiwari|User Page|Blog|BizTalk
Server : How Map Works on Port Level

Return Delivery Error in MIGO while doing Movement type 122

Hi All,
I am doing MIGO Return Delivery to Vendor. I am getting the following Error. Pls help its urgent issue.
I have checked the stock level. The stock is sufficient for doing return delivery.
"Deficit of BA Unrestricted-use 1,575 MT : 20461615 2100 2131 MARCH2012"
Thanks IN Advance,
GANESH
Edited by: ganesh_pall on Sep 19, 2011 10:43 AM

HI,
Can you tell me the stocks are available in unrestricted use or any other use like blocked (or) quality inspection . check it once.
if the stocks are available in quality inspection first transfer the stock from quality inspection to unrestricted through t.code qa32
Then try to do the return to the vendor through migo
Edited by: A.Purihella on Sep 19, 2011 10:55 AM

Dump error in MIGO

Dear all,
I am getting the following dump error in MIGO while posting the document.
*A balance has occurred in transaction currency 'INR' with the*
    *following details:*
    *Exchange rate '00', amount '             1.40-' and currency key*
    *'INR'.    The data in the transaction currency were transferred from the*
    calling application.System Response
    Your data cannot be processed in FI.
Kindly guide me to solve the problem.if any notes to be applied for the solution kindly give me the note no

give detail information of the exchange rate u have maintained- This is th eproblem with FI config.
Consult ur FI guy or give complete details

Encountered : A system error has occurred while locking, pls help

Dear All..
pls help..
while executing some of our remote function module we encountered some locking error.. the message returned by SAP is :
A system error has occurred while locking
from message class : M3 #021
the remote function module is running bapi_goodsmvt_create in background..
the question is.. why this error occured and how to solve it ? and what is the root cause.. ?
because the error is only happened once (until now) we cannot simulate to get the error again.. so it is hard to find out the root cause..
thanks for the help..
sasmente

Hi,
I am also having the same problem. I am running the BAPI_MATPHYSINV_CHANGECOUNT' to count the Articles.
When I print the error on screen, some the data shown as counted. Some are not changed and some with the following error.
System error while locking the data
Furthermore I went to the BASIS and saw that when we run this particular program its showing the locks on MARC and several tables with the same System ID from which we run the program
Can anyone come up ? Its getting too hard to resolve.

Error while activating any message mapping in IR: very strange

hi forum i m getting an error in IR while activating any messageMapping.
the error is too long to be posted....i m posting a few lines of that:
     Internal error while checking object Message Mapping MM_sdptestFileToFile | http://sdzpoc.com.test/sdptest (ZPOC_TEST, 1.0 of zpoctest); see details (CHECK_EXCEPTION)
     Internal error while checking object Message Mapping MM_sdptestFileToFile | http://sdzpoc.com.test/sdptest (ZPOC_TEST, 1.0 of zpoctest); see details (CHECK_EXCEPTION)
     /usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapdddd0cb0100311dca6090012799eddc6/source/com/sap/xi/tf/_MM_sdptestFileToFile_.java (No such file or directory (errno:2))
     /usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapdddd0cb0100311dca6090012799eddc6/source/com/sap/xi/tf/_MM_sdptestFileToFile_.java (No such file or directory (errno:2))

Sudeep,
Let we try this way. I'm sure you might have some existing mapping objects in IR.
Try to change that object(Description give some name) and activate again the object.
Reply your results whether you are getting the same error.
One sec before changing the object just test the mapping and change the object.
Best regards,
raj.

Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

it seems my subscription had expired so I signed up again.. It was still having trouble so I repeated the sign up process again.. Then it worked perfectly.. Unfortunately, I think I just subscribed twice and need to cancel one of them. Ugh. Such a pain when I'm trying to get this project completed. I'll be canceling at least one of the subscriptions in the morning. Adobe is not my favorite company right now. None of this was intuitive. And trying to get help was an absolute waste of an hour.
Regards,
Nathaniel
[removed by moderator]

An error has occurred while accessing SQL database or system resources. If this is the first time you have seen this message, please try again later. If this problem persists, please contact your administrator.

I have SP Server 2010, and when I try to DELETE a rule within an existing Audience, "Property (Account Name) = domain/username", I get this error, "An error has occurred while accessing SQL database or system resources. If this
is the first time you have seen this message, please try again later. If this
problem persists, please contact your administrator." When I try to "MODIFY" the rule I get this error, "One or more values typed on this page are not valid. Check the text for the indicated fields."
The last time I checked it was working, I'm not aware of any new updates installed recently? I did a full Profile Synchronization as well, but still not working, please advise? -- Evenstarline

Hi Sara,
First of all thank you very much for your prompt responses. Here are my comments to each of your suggestions below, and just to let you know I am using a Farm Admin account.  I
was able to do this way after we upgraded from SP 2007 to SP 2010 as well.   I would like to mention I'm not a SP expert, just been given the responsibility due to another person handling it just left, so apologize with some of
my novice questions below?
1. When I change the Operators to "Contains" or "Not Contains" get generates this error below.
     Error generating in red towards top of the audience page..."One or more values typed on this page are not valid. Check the text for the indicated fields."
     Error occurred where you enter your "Value"..."Could not resolve the user identity. Please re-enter the account name."
2. We have a 3-server-tier topology (SPWeb, SPDB, and SPFarm). Does the updates only apply to where the Central Admin is installed, which is the "SPFarm"? I checked all
3 servers, and NONE of the updates (KB2899494, KB2889845, and KB2883055) you'd mentioned are installed.
3. I'm new to IISRET, I need to be extra cautious of what I run in production, is this safe to run with no problem? What does it do? And How do I run it?
4. I'm also new to viewing the ULS log. I'd just downloaded a viewer for it. I'm assuming the only logs I need to be concern with viewing are within the SPAdmin (where Central
Admin is installed)? There's so many of them, what should I be looking for exactly?
Evenstarline

Error while creating candidate (Message no. HRRCF0001155)

Hi experts,
I am launching recruiters page thorugh NWBC. While creating external candidate application, I am getting this error -
Error while creating candidate
Message no. HRRCF0001155
In SLG1, below is error analysis -
@5C\QError@ Error while creating candidate @35\QLong text exists@ @16\QDetail exists@
@5C\QError@ The error occurred in program CL_HRRCF_CANDIDATE_REGISTER===CM001 line 186 @35\QLong text exists@ @16\QDetail exists@
@5C\QError@ Error while creating candidate @35\QLong text exists@ @16\QDetail exists@
@5C\QError@ The error occurred in program CL_HRRCF_CANDIDATE_REGISTER===CM001 line 118 @35\QLong text exists@ @16\QDetail exists@
@8N\QCancel@ Business partner 824 already exists @5F\QNo long text exists@ @16\QDetail exists@
@5C\QError@ The error occurred in program CL_HRRCF_CANDIDATE============CM002 line 132 @35\QLong text exists@ @16\QDetail exists@
Please help.
Thanks,
Neha

Hi Nicole,
Thank you very much for the reply. You are correct, but I checked the SICF set up was ok. Currently we are not using the workflow. Recruiter's role assignment was also proper.
This problem was related to business partner number range assignment for internal/external candidates, since it was not creating new business partner. It is ok now.
Regards,
Neha

"Error while reading Exceptions" - Message No. /SCMB/ORDER 351

Hello,
An error message that we are getting as "Error while reading Exceptions" - Message No. /SCMB/ORDER 351 while entering a Work Order Number in the 'Work Order details' screen in the SNC Web UI. So, please let us know how to tackle this error in SNC.
Regards,
PCN

Hello Pavan,
This message can occure at multiple places. Most of these are status reading and checking in the /SCA/CL_SVORDER class. The following methods can throw this message:
CHECK_ITEM_EXCEPTION_STATUS
You can set a BP at line 20 and debug the STATUS_CHECK function.
GET_ITEM_EXCEPTION_STATUS
You can set a BP at line 29 and debug the STATUS_READ function.
READ_ITEM_EXCEPTION_STATUS
You can set a BP at line 31 and debug the /scmb/cl_odm=>get3_by_id method.
I hope this will help you.
Regards,
Richard

Error message while opening a project: "an error was encountered while loading the image"

We've run into a new error message here today:
an error was encountered while loading the image
It appears when we try to load a recorded project. It occurs on both the cp-file and the backup file.
It's on a windows 7-machine.
Anyone encountered it and knows what it means?
is the project lost forever?

Hi there
Hmmm, it may be related to Windows 7, but let's check the obvious stuff first.
Where exactly is th project if you locate it using Windows Explorer? Is it found on your local C drive or is it found on a network drive?
If it's on a network drive, please note that Captivate has never worked well with projects being edited while they are on network resources. So the first step in this case (assuming that's where the project is) would be to move the project file off the network and onto the local C drive. Then try opening again.
Assuming the project isn't on a network, all still may not be lost. The next thing to try would be to create a new blank project sized identically to the one that seems to have gone south. Then click File > Import > Slides/Objects and see if you can import the content from the errant project into the new.
And if those steps fail, it's likely time to restart from scratch. But depending on what you have done so far and how you have done it, you might be able to salvage some of it by playing back the content (assuming you have published it during testing) and record what you are playing back with Captivate.
Best of luck to you in sorting things. You should also consider filing a Bug Report.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Error: 28005, Severity: 16, State: 2...An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impe

I've seen some similar questions, but want to make sure I can get an answer quickly and how to fix.
Thanks,
Paul
spid24s Error: 28005, Severity: 16, State: 2
spid24s An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impersonated,
or you do not have permission.

Hi Paul,
I also had the same error on one of my servers, and it was because the user that created the database no longer worked for the company.
So when his AD account got deleted, the database had NULL as owner
Using the following query I asked for the owners of the databases:
select name, suser_sname(sid) from master.dbo.sysdatabases
So changing the owner of the databases that had a NULL owner solved the issue for me.
use <databasesname>
go
exec sp_changedbowner 'sa'
Thanks for triggering the solution.
Peter

Error in MIGO while GR reversal - Message no. M7021

Similar Messages

Maybe you are looking for