Error in Multi Message Mapping
Hi,
I am getting the following error in my multi message mapping scenario where I am trying to create 2 different output files from a single input file based on some condition. I tested the message mapping by using a test file and it works fine, but when I use the same file and test it end to end the scenario is failing with the following error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!--
Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">GENERIC</SAP:Code>
<SAP:P1>Split mapping created no messages</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Split mapping created no messages</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Is there something wrong with my configuration?
The trace has the following content.
Trace level="1" type="T">*** START APPLICATION TRACE ***</Trace>
<Trace level="3" type="T">Document start</Trace>
<Trace level="3" type="T">Start tag [ns0:Messages]</Trace>
<Trace level="3" type="T">Add raw attribute [ xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"]</Trace>
<Trace level="3" type="T">Start tag [ns0:Message1]</Trace>
<Trace level="3" type="T">Close tag [ns0:Message1]</Trace>
<Trace level="3" type="T">Start tag [ns0:Message2]</Trace>
<Trace level="3" type="T">Close tag [ns0:Message2]</Trace>
<Trace level="3" type="T">Close tag [ns0:Messages]</Trace>
<Trace level="3" type="T">Document end</Trace>
<Trace level="1" type="T">*** END APPLICATION TRACE ***</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_Employee1_MT_To_Employee1_MT_AND_Employee2_MT_MM_ completed. (executeStep() of com.sap.xi.tf._Employee1_MT_To_Employee1_MT_AND_Employee2_MT_MM_).</Trace>
<Trace level="3" type="T">Message Type 1 Number of Messages 0</Trace>
<Trace level="3" type="T">Message Type 2 Number of Messages 0</Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
</Trace>
<Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!--
-->
<Trace level="3" type="T">Persisting message Status = 014</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>
Hi,
The scenario I am trying to test is a multi mapping scenario where I am trying to split one source message and create two target messages by using two different receiver interfaces, one for each message.
I am on PI 7.1 and when I test message mapping and operation mapping using the payload from SXMB_MONI, it is successful. Whereas when I test the scenario end to end I am getting the following error messages:
Operation Mapping
Employee_Out_SI_To_Employee1_In_SI_AND_Employee2_In_SI_OM
Name
Employee_Out_SI_To_Employee1_In_SI_AND_Employee2_In_SI_OM
Namespace
http://accenture.com/1:N_multi-mapping
Runtime error
Split mapping created no messages
Start tag ns0:Messages Add raw attribute xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge" Start tag ns0:Message1 Close tag ns0:Message1 Start tag ns0:Message2 Close tag ns0:Message2 Close tag ns0:Messages
Could someone please help
Cheers,
S
Similar Messages
-
JDBC Sender Error "RuntimeException in Message-Mapping transformation"
Hi All,
I have JDBC as sender and i am able to poll the data from the database,which is available in SXMB_MONI but its giving an error "RuntimeException in Message-Mapping transformation".I have tested the mapping in TEST and its working fine but when i tested the same in configuration its throwing an error in Interface mapping(<NOT FOUND>).
I have also created a node <b>row</b> in my sender data type.
Expecting your help soon.
Thanks and regards,
Zabi.Hi,
Check the data coming inside..the XI... that is before mapping..
Regards
Agasthuri Doss -
SOAP fault - How to log error in response message map
Hi,
I have a scenario ABAP Proxy <-> XI <-> SOAP.
Occassionally there is an issue with communication to the destination system and an HTTP 500 Error is returned. I assume this is due to a system related error and it is returned as a SOAP Fault as opposed to a SOAP response with payload.
How do I get this "HTTP-500" error into my message map to return to the calling system ?
I have looked at Fault Messages but need to know if these are relevant for the SOAP Adapter and how they can be utilised ?
Thanks for any help.
Kind regards
Colin.SOAP fault message not in correcto format to allow an application error to be caught.
-
Multi-Message Mapping based on value of field - (Without BPM)
Hi.
I am having a bit of difficulty with multi-message mapping without BPM. I want to map to message1 & message2 based on a field in the rows of the source structure.
e.g.
row1-Source-Field1=> (if equal 0) => <b>Message1</b>-field1.
row2-Source-Field1=> (if equal 10) => <b>Message2</b>-field1.
To attempt to do this, I use the conditions in the graphical mapper:
if row-Source-Field1 = 0 => Map "Row to MessageType1".
if row-Source-Field1 = 10 => Map "Row to MessageType2".
However when I test this the mapping only seems to consider the first row value in row-Source-Field1 and ignores the fact that row two has a value of 10. I think this has something to do with contexts etc..
I would appreciate any help please.
Regards.
Mick.in that case try this out
row1-source-field1 (remove context) -- UDF -splitbyvalue-target
UDF1(for message 1)
for(int i=0;i<field1.length;i++)
if(field1<i>.equals("0"))
result.addValue(<field to be mapped><i>);
UDF2(for message 2)
for(int i=0;i<field1.length;i++)
if(field1<i>.equals("10"))
result.addValue(<field to be mapped><i>); -
Query Regarding Multi-Message Mapping in Interface Mapping.
Hi All,
I've a query that can we use Multi-Message Mapping in Interface Mapping if:
One mapping structure is simple one-2-one mapping and
Second mapping is calling a stored procedure.
Please give me some links if the answer is YES.
Thanks in Advance.
Regards,
Sreedhar.
Edited by: Sreedhar Av on Oct 12, 2009 1:26 PMHi,
Your question not clear buddy..what i understood is..
If you want execute multiple message mappings in Interface mapping we can ,just add two mapping programs in interface mapping.first mapping program output is input to the second mapping program.
If first mapping program is very simple,if you want to execute stored procedure in second level mapping write used defned fun ction to conect to data base or create JDMC receiver communication channel ,cal the communictaion channel in udf.write stored procedure in UDF.
SEARCH for more info in sdn how to perform DBLOOKUPS.
regards,
Raj -
Could Mapping Template be used in Multi Message mapping
I had a 1:1 message mapping: MM_A
but later i foudd that the mapping should be 1:n
Multi message mapping
so firstly i created mapping template of MM_A
but the template doesn't work when i am doing the multi mapping.
Could Mapping Template be used in Multi Message mapping?
Thank you very muchHi leo,
<i>
Could Mapping Template be used in Multi Message mapping?</i>
Yes it can be used......
Regards,
Abhy -
File-name not being fetched in a multi-message mapping by Dynamic Conf
In a scenario, i have a BPM which has a transformation step which contains a mutimapping ...means 2 messages mapped to 1 messgaes, here in the mapping i m using an UDF and written code to extract the file name from dynamic configuration.....
the problem is ...the same BPM contains another transformation step which contains a message mapping (which is not multi mapping), and here the code (UDF) works to fetch the file name...
the code is all correct....and it looks like
DynamicConfiguration conf = (DynamicConfiguration)
container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String sourceFileName = conf.get(key);
if (sourceFileName == null ){
sourceFileName = "ErrorFile.xml";}
return sourceFileName;Hi,
The scenario I am trying to test is a multi mapping scenario where I am trying to split one source message and create two target messages by using two different receiver interfaces, one for each message.
I am on PI 7.1 and when I test message mapping and operation mapping using the payload from SXMB_MONI, it is successful. Whereas when I test the scenario end to end I am getting the following error messages:
Operation Mapping
Employee_Out_SI_To_Employee1_In_SI_AND_Employee2_In_SI_OM
Name
Employee_Out_SI_To_Employee1_In_SI_AND_Employee2_In_SI_OM
Namespace
http://accenture.com/1:N_multi-mapping
Runtime error
Split mapping created no messages
Start tag ns0:Messages Add raw attribute xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge" Start tag ns0:Message1 Close tag ns0:Message1 Start tag ns0:Message2 Close tag ns0:Message2 Close tag ns0:Messages
Could someone please help
Cheers,
S -
Error while activating message mapping
Hi,
We are trying to activate message mappings and getting error as CHECK_EXCEPTION and in error details its showing that usr/sap/server.........................../classpath_resolver/Map.......................no such file or directory.........
What can be the issue?We can activate all other objects(DT,MT,IM,etc)
Best Regards,
Harleen Kaur ChadhaHi
Check this thread you can find the reason for this error CHECK_EXCEPTION solved here
Activating Object in IR - Getting Null Pointer Exception
Re: mapping test error
Internal error while checking object Message Mapping...
Problem Activating Mappings in the IR
Message Mapping activation Error
Regards
Abhishek -
Error while opening Message Mapping
Hi All,
I have one MM in ESR, IDoc to EDI, it has been developed before, and the interface is working successfully.But when I open this MM in ESR, it given a STOP error with desc as 'For input string: ""'.
and then there is nothing displayed on Screen under Definition,Test and Functions tab of MM.The Signature tab content is visible properly.
I am working on PI 7.1.
Is this issue is because of version comapatibilty or missing object. Please provide your inputs to resolve this issue,
Thanks,
RuchiHi All,
I have checked with my basis team, but they suggested that the patches can not be installed as this problem is happening with single message mapping.
When I open this MM, it gives the same STOP error :For input string: "". and when I click on Message Mapping -> Check button, it prompts a message 'Parameter #ParamName# has the invalid value null'.
Please help me to resolve this.As the mapping itself is not getting loaded, so not getting how to set this parameter value(if it is used in MM). -
Error when saving message mapping -
Just upgradedto PI 7.1. System details below....
Make Release NW07_08_REL SPS Number 08 JDK Version jdk15
Server Version SAP J2EE Engine 7.10.3710.43701.20090416112158
Java Runtime Java(TM) 2 Runtime Environment, Standard Edition (version=5.1.034)
Java Virtual Machine SAP Java Server VM (version=5.1.034)
Operating System AIX (version=5.3, arch=ppc64)
I've been building an interface to test the developer tools and when I save my message mapping (it's a very simple graphical mapping) I get a java popup with the text 'Internal GUI error', I'm using Java WS Version 1.5.0 (build 1.5.0_19-b02) as per the PI documentation.
I recreated the problem timing each activity and saved the exception in a text file. I'm able to identify the relevant section of the exception biut it's meaningless to me. I searched SDN & OSS and I can't find any specific hits. Those that are similar (different SAP applications - WebDynPro for example) point towards incompatible s/w components - Java Run Time environment etc.... I've cleared the Java WS cache (Edit>Preferences>Delete Files) just to make sure, but the problem still occurs. I'm looking for advice. I've pasted some of the exception details below. I can provide more information but it's a pretty long file.
Edited by: Rob Warde on Aug 5, 2009 4:27 PMThrown:
com.sap.aii.utilxi.swing.framework.FrameworkException: Internal problem occurred
at com.sap.aii.utilxi.swing.toolkit.ExceptionDialog.init(ExceptionDialog.java:124)
at com.sap.aii.utilxi.swing.toolkit.ExceptionDialog.<init>(ExceptionDialog.java:96)
at com.sap.aii.utilxi.swing.toolkit.IBMessages$1.run(IBMessages.java:319)
at com.sap.aii.utilxi.misc.thread.ThreadPool.assureAWTEventQueueing(ThreadPool.java:84)
at com.sap.aii.utilxi.misc.thread.ThreadPool.assureAWTEventQueueing(ThreadPool.java:67)
at com.sap.aii.utilxi.swing.toolkit.IBMessages.showException(IBMessages.java:309)
at com.sap.aii.utilxi.swing.toolkit.IBMessages.showException(IBMessages.java:299)
at com.sap.aii.utilxi.swing.toolkit.Guitilities$EventProcessor$1.run(Guitilities.java:395)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at com.sap.aii.utilxi.swing.toolkit.Guitilities$EventProcessor.dispatchEvent(Guitilities.java:319)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.lang.NoSuchMethodError: com.sap.aii.ib.bom.mt.js.JavaSource.setMode(I)V
at com.sap.aii.mappingtool.Project.getJavaFile(Project.java:324)
at com.sap.aii.mappingtool.mf.MappingTool.getJavaFile(MappingTool.java:107)
at com.sap.aii.mappingtool.fwutil.api.ViewUtil.prepareSave(ViewUtil.java:118)
at com.sap.aii.ibrep.gui.mapping.xitrafo.XiMappingView.prepareSave(XiMappingView.java:269)
at com.sap.aii.ib.gui.editor.DefaultPersistenceHandler.save(DefaultPersistenceHandler.java:153)
at com.sap.aii.ib.gui.editor.XiDocument.save(XiDocument.java:335)
at com.sap.aii.utilxi.swing.framework.cmd.SaveCommand.execute(SaveCommand.java:76)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:198)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:154)
at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:82)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source) -
Error When Save Message Mapping
Hi evreybody,
I try to save my mapping. I did the test to check to know if everything is ok. The test is executed succesfully but when I try to save, I receive the following error message:
Internal error: Unable to transfer changes for object Message Mapping MM_Order_Idoc | http://accenture.com/PI01/Idoc to change list "Standard Change List" (348cd3a0-f384-11dd-c70e-003005989c0a) since object still in change list "Standard Change List" (faa66160-f699-11dd-8a1b-003005989c0a)
Thank you for your support,
Mohamed.Release the lock by going to XI Admin page and check Integration repository and lock tab where you can see the objects locked ,release the lock and you can do the needed.
Rajesh -
Send Alerts(e-mail) for errors in SXMB_MONI(message mapping exceptions)
Good afternoon !
I´m configuring SAP Netweaver PI 7.0(SP13) to use Alert Framework to send Alerts when errors occurs in the interfaces processing.
I just achieved configure to send alerts when errors ocurrs in the Adapter Framework but, I can´t configure correctly to send alerts when errors ocurred only in SXMB_MONI(for example, message mapping exception in asyncronous interface).
I just followed the instructions at Michal Krawczyk
weblog(/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step) and, initially, this was not sufficient to start to send alert when errors occurs only on SXMB_MONI, so, I researched and found some configurations to do in CCMS(started from here: http://help.sap.com/saphelp_nw70/helpdata/en/e3/bf3b7a8ccb8040b638ff732c551aeb/content.htm), jobs to start events collectors, etc, and after this, I could see a mail for an message mapping exception. BUT, this message, sent from CCMS to ALM, doesn´t carry out all the message parameters, like message Id, sender(service, interface), receiver(service, interface), that is very important to help to find the message with errors to be solved.
There is somebody here that already done the Alert configuration to send messages for errors found only in SXMB_MONI(Monitor for processed XML Messages) ?
There is a better way to achieve this ?
Thank you for your attention,
Wilson Rodrigo dos Santos
SAP Netweaver XI/PI ConsultantHi
Go through these links and follow it.
ALERTS CONFIG AND STUFF
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
XI: Alerts - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
http://help.sap.com/saphelp_nw04s/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm
Triggering by Calling a Function Module Directly.
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Alerts with variables from the messages payload (XI) u2013 UPDATED
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Simple Steps to Get Descriptive Alerts from BPM in XI
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Triggering XI Alerts from a User Defined Function
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Throwing Smart Exceptions in XI Graphical Mapping
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
/people/sukumar.natarajan/blog/2007/01/07/how-to-raise-alerts-from-abap-proxy
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/sravya.talanki2/blog/2006/11/22/error-handling-framework-xiout-of-the-box-episode-1
/people/ginger.gatling/blog/2005/06/16/integrating-alerts-into-uwl--its-no-problem
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.ht
http://help.sap.com/saphelp_nw04/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
check this links.
https://www.sdn.sap.com/irj/sdn/forums
Trouble shooting Alert configuration:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Alert Inbox
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Notification Step-by-Step
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Defining Alert Classifications
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Triggering Alerts
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Setting up alerts
Setting up alerts in RZ20
Alert Management
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e04141e8-0f11-2a10-adaa-9d97b062c2df
Alert Notification
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f449a8-a6db-2910-a386-d2b5999f5751
/people/matt.kangas/blog/2006/06/27/personalized-alert-delivery
Thanks
Saiyog -
Message Mapping error: RuntimeException in Message-Mapping transformation
Hi,
Being new to XI, I am struglling to sort out a basic mapping error. Appreciate if you could help out.
Its an File->XI->R/3 scenario.
My FCC successfully reads the File and creates an XML. However this XML is not transferred to the target XML structure which is exactly same except the root element name is different at top.
I tried various forum tips but I still am getting the error.
( When I Test the Message mapping in test mode..it seems fine, however if I copy the XML from SXMB_MONI, it then throws the above error)
I looked at the MM in text mode: below is the extract
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER=
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER/SOURCE=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER/SOURCE=
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER/DESTINATION=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER/DESTINATION=
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER/MESSAGE_ID=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER/MESSAGE_ID=
As seen the name space in both starts with nS0 and end of each line has '=' sign. Is that ok.
I have run out of options and dont know , whats the problem. Please help.
The target and Source XML structures are exactly same as shown below
MT_REQUEST MT_REQUEST_TO_SAP
|__MSG_HEADER |__MSG_HEADER
|__SOURCE |__SOURCE
|__DESTINATION |__DESTINATION
|__MESSAGE_ID |__MESSAGE_ID
And the SXMB_MONI Trace shows the following error
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation:
Cannot produce target element /ns0:MT_REQUEST_TO_SAP.
Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at ..
Thanks
Shirin
Edited by: Shirin K on May 29, 2008 10:29 AMHi Prakasu,
As structure are exactly same, I have done 1:1 mapping. So all the fields in target structure are mapped, so no field has beeen left.
In this structure, I do not have any 1:n relation. So 1:1 mapping should be fine.
Apart from this could teher be any other reason.
Regards
Rajiv -
RFC_to_File scenario: error in request message mapping
Hi!
I am configuring RFC_to_File scenario.
The error at the begining is:
com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_Z_RFB_MATERIALEINGABE_PBU_zu_MT
: Fatal Error: com.sap.engine.lib.xml.parser.Parser
Exception of class CX_XMS_SYSERR_MAPPING
When I display the request message mapping are of the message I can see:
<Trace level="1" type="T">Interface-Mapping http://www.sap-press.de/xi/training/PBU_00 IM_Z_RFB_MATERIALEINGABE_PBU_zu_MI_Material_Async_In</Trace>
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_MM_Z_RFB_MATERIALEINGABE_PBU_zu_MT_Material_</Trace>
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser : #0 not allowed in Character data sections(:main:, row:1, col:202) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:187) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:151) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest
Can some one help me to solve this problem?
Thank you very much!
regards
HolgerHolger,
Message Mapping Failed.
>com.sap.engine.lib.xml.parser.ParserException: XMLParser : #0 not allowed in Character data >sections(:main:, row:1, col:202) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException
You are Passing Char to a field, which is not as per the Message Mapping rule
Cheers
Agasthuri Doss -
Java heap space error occured during message mapping of FILE to IDOC
hello Friends,
I am trying to do the message mapping for File to Idoc scenario.
Idoc which I am using is HRMD_A.HRMD_A06 and infotype which I want to update is 14. I am trying to map the message type which I hav created for infotype 14 with the IDOC
Its very simple scenerio but every time I try to save the mapping before activating it I get an error:
Java heap space
Internal problem occurred (INTERNAL_PROBLEM)
Java heap space.
I am not able to figure out what possibly is the problem wheather its from my end or the BASIS end.
Kindly help.
Regards,
LokeshAs the server probably survives (you restart your Integration Builder and can probably connect immediately), the problem will be on your side (client). Did you add one or more large xml-test-instances to the mapping ? If yes, delete them, because they lower the performance and can make problems. If not, then this is a strange problem. Even if the Idoc structure is complex, the mapping object itself cannot be that large.Is this problem only with this one mapping ?
CSY
Edited by: Christian Sy on Mar 9, 2010 6:26 AM
Maybe you are looking for
-
External Drive Stolen with Time Machine Back Ups
Hello, Sorry if this has been posted before. I scanned through a few pages of posts and didn't see anything. My home was burglarized and they took my G5, Cinema Display and my 500GB external drive with my Time Machine backup data. My question is: How
-
Free space on boot drive constantly decreases until reboot
Hi there. I have a really weird thing happening that I've never seen before. I'm running 10.7.4 on an iMac, and have about 45GB free on the system drive. At least that's right after I boot up the system. After that, the free space available on my HD
-
Hi All, I am working on a report and in report designer I have taken Customer Account Number ,Account Type,Posting key, Doc Type,Posting Date, G/L Account and Type of Payment. Now I want to see only 3 Doc.Types Only few Customer Account Numbers Only
-
Messages disconnected when sending emoticons
Hi, I'm having a weird problem when using messages. Whenever I try to send a message containing an emoticon using the smiley face next to the text input, it drops the connection to jabber. This has happenned with gtalk and also our internal jabber fo
-
Why can't my Windows 7 machine see my MacBook Air?
I have a Windows 7 desktop and a MacBook Air. In the wireless network we have. I've set everything up so it should see each other. Windows 7 is new for us - we had it working before with XP... We have an XP laptop, a Windows 7 desktop and a MacBook