Error in Pre- Export methods for a request
Hi All,
I am getting an error while releasing a request, its giving
"Error in Pre- Export methods for a request DM0k.....". Could you please tell me why and how can I rectify that?
Thanks.
NA
Please go through as per the link
[SAP Transport Request |http://www.sap-basis-abap.com/sapbs008.htm]
thanks
G. Lakshmipathi
Similar Messages
-
Error in pre-export methods for request
hi...
while releasing the TR we are facing this error msg..." Error in pre-export methods for request" it is showing lock in fornt of the TR.neither be able to delete the TR ....
do reply as soon as possible..Hi,
I had the same error PU238.
What I did was:
Execute SE03 to unlock the object.
Then execute the program 'RS_STREE_OBJECTS_TO_REQ_GET', not sure what it does.
Afterwards, it worked perfectly.
Hope that information helps you.
Regards, -
Revision: 10891
Author: [email protected]
Date: 2009-10-06 09:46:47 -0700 (Tue, 06 Oct 2009)
Log Message:
Fix for ASDoc throws error when using getter methods for pseudo-inheritance of static constants
QE notes: None.
Doc notes: None
Bugs: SDK-22676
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-22676
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.javaHave you tried using com.adobe.air.crypto.EncryptionKeyGenerator instead?
-
Error in Pre-Pop Adapter for AD using ResourceObjectDefinition Mapping
Hi
I have a PRe-pop adapter for Org name in AD -
One of the variables is ResourceObjectDefintion. However OIM is not able to map it to the right object name and throws the below error -
cAdapterDataMap/getResourceObjectInfo encounter some problems: Error retrieving user info: Object Name
Class/Method: tcAdapterDataMap/getResourceObjectInfo encounter some problems: Column 'AD XXX' not found
com.thortech.xl.dataaccess.tcDataSetException: Column 'AD XXX' not found
at com.thortech.xl.dataaccess.tcDataSet.getColumnIndex(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.getDataType(Unknown Source)
at com.thortech.xl.dataobj.util.tcAdapterDataMap.getProcessResourceObjectInfo(Unknown Source)
at com.thortech.xl.dataobj.util.*tcAdapterDataMap.getResourceObjectInfo*(Unknown Source)
at com.thortech.xl.dataobj.rulegenerators.tcBaseRuleGenerator.getRunTimeValue(Unknown Source)
at com.thortech.xl.dataobj.rulegenerators.adpADPOPULATEMANAGEROU.implementation(adpADPOPULATEMANAGEROU.java:56)
at com.thortech.xl.dataobj.rulegenerators.tcBaseRuleGenerator.run(Unknown Source)
at com.thortech.xl.dataobj.rulegenerators.tcAdapterExecuter.executeRuleGenerators(Unknown Source)
at com.thortech.xl.dataobj.util.tcPrePopulateUtility.setDataFromAdapter(Unknown Source)
at com.thortech.xl.dataobj.util.tcPrePopulateUtility.prePopulate(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.prepopulateProcessForm(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.prepopulateProcessForm(Unknown Source)
at com.thortech.xl.ejb.beans.tcFormInstanceOperationsSession.prepopulateProcessForm(Unknown Source)
at com.thortech.xl.ejb.interfaces.EJSRemoteStatelesstcFormInstanceOperations_3fa3c79b.prepopulateProcessForm(Unknown Source)
at com.thortech.xl.ejb.interfaces._tcFormInstanceOperations_Stub.prepopulateProcessForm(_tcFormInstanceOperations_Stub.java:1963)
at Thor.API.Operations.tcFormInstanceOperationsClient.prepopulateProcessForm(Unknown Source)
at com.thortech.xl.dataobj.util.tcAdapterDataMap.getResourceObjectInfo(Unknown Source)
at com.thortech.xl.dataobj.rulegenerators.tcBaseRuleGenerator.getRunTimeValue(Unknown Source)
at com.thortech.xl.dataobj.rulegenerators.adpADPOPULATEMANAGEROU.implementation(adpADPOPULATEMANAGEROU.java:56)
at com.thortech.xl.dataobj.rulegenerators.tcBaseRuleGenerator.run(Unknown Source)
at com.thortech.xl.dataobj.rulegenerators.tcAdapterExecuter.executeRuleGenerators(Unknown Source)
at com.thortech.xl.dataobj.util.tcPrePopulateUtility.setDataFromAdapter(Unknown Source)
at com.thortech.xl.dataobj.util.tcPrePopulateUtility.prePopulate(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.prepopulateProcessForm(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.prepopulateProcessForm(Unknown Source)
at com.thortech.xl.ejb.beans.tcFormInstanceOperationsSession.prepopulateProcessForm(Unknown Source)
at com.thortech.xl.ejb.interfaces.EJSRemoteStatelesstcFormInstanceOperations_3fa3c79b.prepopulateProcessForm(Unknown Source)
at com.thortech.xl.ejb.interfaces._tcFormInstanceOperations_Stub.prepopulateProcessForm(_tcFormInstanceOperations_Stub.java:1963)
at Thor.API.Operations.tcFormInstanceOperationsClient.prepopulateProcessForm(Unknown Source)
Thanks- Verify that the AD XXX RO exists in the system , if its there , then re do the mappings once more .
I did the same and it worked for me
Thanks
Suren -
Unable to install SQL Server Express 2008 R2 - Errors "Failed to retrieve data for this request"
As domain admin I am attempting to install "SQL Server 2008 R2 with SP2" but it keeps failing with "Failed to retrieve data for this request".
The installation never actually starts, it errors before then.
It displays the same error even if I run the System Configuration Checker.
The summary.txt for the install displays the following text:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -1554760125
Exit facility code: 852
Exit error code: 15939
Exit message: Failed to retrieve data for this request.
Start time: 2014-08-15 16:49:52
End time: 2014-08-15 16:50:06
Requested action: RunRules
Machine Properties:
Machine name: servername
Machine processor count: 8
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: Yes
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 1
Installation location: c:\84122ef5b6d9cdcd3b2ac48cec\x64\setup\
Installation edition: EXPRESS
User Input Settings:
ACTION: RunRules
CONFIGURATIONFILE:
ENU: True
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES:
HELP: False
INDICATEPROGRESS: False
INSTANCENAME: <empty>
PASSPHRASE: *****
QUIET: False
QUIETSIMPLE: False
RULES: GLOBALRULES,SqlUnsupportedProductBlocker,PerfMonCounterNotCorruptedCheck,Bids2008InstalledCheck,BlockInstallSxS,AclPermissionsFacet,FacetDomainControllerCheck,SSMS_IsInternetConnected,FacetWOW64PlatformCheck,FacetPowerShellCheck
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140815_164944\ConfigurationFile.ini
Detailed results:
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
Message:
Failed to retrieve data for this request.
Data:
HelpLink.ProdName = Microsoft SQL Server
HelpLink.BaseHelpUrl = http://go.microsoft.com/fwlink
HelpLink.LinkId = 20476
DisableWatson = true
Stack:
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
Message:
The network path was not found.
Data:
WatsonData = [email protected]rror
Stack:
at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.CreateBaseKey(ServiceContainer ctx, String machineName, IntPtr hKey, String keyName, RegistryAccess access, RegistryView
view)
at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocalMachine(ServiceContainer ctx, String machineName, RegistryAccess access, RegistryView view)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
Message:
The network path was not found.
Data:
WatsonData = [email protected]rror
Above message says that your registry is not consistent and some of the parameters are missing from registry.Or
Account installing SQL server does not have permission to access this. I think case can be here that account with which you logged into your system to install SQL Server might not have certain privileges. Can you take help
of domain admin account add it as a local administrator in this machine always right click on setup file and select run as administrator. Before this make sure you remove all SQL Server components from add remove program
I strongly recommend you to have a good look at below thread
http://support.microsoft.com/kb/2000257/en-us
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Error Detected by export DLL for pdf
Post Author: netonomous
CA Forum: Exporting
We have a Win 2000 box with this feature working with no problem.
I am getting an error exporting to .PDF when using .NET 2 Business Objects. Quite the opposite of your situation. Any ideas? My temp folder is under C:\Windows\Temp and the error I receive is
Error in File C:\WINDOWS\TEMP\TSRDetail {F7EAB0D7-408F-4787-A1FE-5086F7199CB9}.rpt: Error detected by export DLL: This is on a Win 2003 box Service Pack 1 with IIS 6.0 with ASP.NET Framework for Crystal using an Oracle Database. Excel exports work ok.
Thanks much in advance.Post Author: netonomous
CA Forum: Exporting
We have a Win 2000 box with this feature working with no problem.
I am getting an error exporting to .PDF when using .NET 2 Business Objects. Quite the opposite of your situation. Any ideas? My temp folder is under C:\Windows\Temp and the error I receive is
Error in File C:\WINDOWS\TEMP\TSRDetail {F7EAB0D7-408F-4787-A1FE-5086F7199CB9}.rpt: Error detected by export DLL: This is on a Win 2003 box Service Pack 1 with IIS 6.0 with ASP.NET Framework for Crystal using an Oracle Database. Excel exports work ok.
Thanks much in advance. -
Error: No permitted payment method for Payment Praposal in F110
Hello Experts,
I am trying to tigger an Idoc for payment from F110 and am getting the following error:
Job started
Step 001 started (program SAPF110S, variant &0000000002133, user ID )
Log for proposal run for payment on 27.01.2005, identification
Additional log for vendor 3803 company code 3000
Due date determination additional log
Document 1900004238 line item 002 via USD 100.000,00-
Terms of payment: 27.01.2005 0 0,000 % 0 0,000 % 0
03 days grace period is being considered
Payment must take place before 30.01.2005; next payment on 26.04.2008
Item is due with 0,000 % cash discount
Payment method selection additional log
Payment method selection for items due now to the amount of USD 100.000,00-
Payment method "C" is being checked
Bank details are being checked
System reads house banks and checks if they are allowed
Our bank 3000 is being checked
Bank different from the specified bank DBKA in master record or items
Our bank 3200 is being checked
Bank different from the specified bank DBKA in master record or items
House bank is selected ...
No permitted payment method exists
Information re. vendor 3803 / paying company code 3000 ...
... payment not possible because of reported error
End of log
Step 002 started (program SAPFPAYM_SCHEDULE, variant &0000000001217, user ID )
Step 003 started (program RFFOEDI1, variant &0000000000042, user ID )
Program RFFOEDI1: No records selected
Step 004 started (program RFFOAVIS, variant &0000000000044, user ID )
Program RFFOAVIS: No records selected
Job finished
Plesase suggest its very urgent.
Thanks,
Suma
Edited by: Suma B on May 3, 2008 9:42 AMcheck payment in vendor master or invoice line items. May be payment method entered in parameters is different from vendor master data and invoice.
Check Payment method configuration for country and Company code
In Payment method for company code
check
minimum and maximum amount
foreign payments allowed or not
Check Bank determination for paying company code combination with payment method -
What export method for iDVD?
Hi,
Apologies if this is posted elsewhere, but if it is I can't find it.
I need to use iDVD to author a DVD using a PPro CS3 project. "Why don't you use Encore?" I hear you say. Don't ask. Encore is not an option and I have to submit the DVD to the client today.
My project is PAL HDV 1440x1080i. iDVD does not import MPEG1 or MPEG2, and when I try to export a Quicktime movie using the Media Encoder the quality is consistently terrible. I tried exporting to Microsoft AVI, but it is incredibly slow (estimated time 4 hours for an 8-minute project doesn't sound right).
Please can someone point me in the right direction for correct export settings for a high-quality Quicktime or AVI movie which I can import into iDVD.
Thanks.exactly, jim. in my period of temporary insanity trying to get the project submitted in time, i had forgotten about the limitations of dvd.
on another topic altogether i've had a peek at the thread on film look and the dv2film website. nice one. on my project i needed to remove an unintended vignette effect from about 8 clips but the process just seemed too daunting. one of these days... -
Error -108 while exporting video for Apple TV
Anyone have a clue why I would be getting at error -108 in QuickTime Pro while converting an MPEG-4 file to Apple TV format? I was just doing File/Export and selecting "Movie to Apple TV" as the export format.
I'm using QT Pro on Vista. The full error message is "Error -108: An unknown error has occured." It came up (probably) at the very end of the export. (The export seemed to running fine, and it was past 50% when I left to go out for awhile. The error was up on the screen when I came back.) The source video is about 2.5 GB, and should be a fairly normal MPEG-4 video, 30fps, 720x480. The error message itself isn't very helpful, obviously.sorry, are you sure?
when I bought my ATV I compared ATV1 and ATV2 and the video performances are the same, infact I play my video in 1280x720 with my ATV but it is convert with toast.
I compared the same video in ATV (720p) and in mpeg 2 (1920x1080 25 Mb/sec) with my medley 4geek and the quality is the same.
Sorry, am I sure about what ?
Apple TV 1 will only play 720p movies at 24 or 25 fps up to 5 Mbps or 960 x 540 at 30 fps, the Apple TV will play video at all frame rates at 720p and around about double the data rate.
Are you sure your camera produces mpeg2 files. If so you might not see an awful lot of difference between the original and the converted videos because h264 is significantly more efficient than mpeg2, although I'd expect you to see some. If your files from your camera are actually h264 wrapped in an mpeg2 container then I'd expect you to see more difference.
another problem, is impossible to create a video .mpe2(fullhd) with imovie, for that I bought ATV.
I don't fully understand what you are asking here.
why toast convert correct to ATV and apple software no?
Possibly because when you are using toast you are choosing a datarate that is compatible with the Apple TV (ie 5 Mbps or less), whereas if you are using (for example) quicktime preset for the Apple TV, you might be making files that are compatible with the Apple TV 2 but not the Apple TV 2, but it's difficult to say without knowing what settings you are using. -
Error when compiling Derivative method for Polynomial Class
Hi guys, doing my homework and I am getting this error for my piece of code.
Error: Operator * cannot be applied to DataElement,int
this is my method
public Polynomial derivative(Polynomial q)
int size = q.length;
int i;
double der[]= new double[size];
DoubleElement p = new DoubleElement();
Polynomial temp = new Polynomial(size);
for(i = 0; i < q.length; i++)
p.makeCopy((DoubleElement) list);
temp.list[i] = list[i].getCopy() * i;
return temp;
Not sure if it is a stupid error or what not, let me know if you need the class as well. Thanks in advance.My DoubleElement looks like this
public class DoubleElement extends DataElement
protected double num;
public DoubleElement()
num = 0.0;
public DoubleElement(double x)
num = x;
public DoubleElement(DoubleElement other)
num = other.num;
public boolean equals(DataElement otherElement)
DoubleElement temp = (DoubleElement) otherElement;
return (num == temp.num);
public int compareTo(DataElement otherElement)
DoubleElement temp = (DoubleElement) otherElement;
if(num < temp.num)
return -1;
else
if(num > temp.num)
return 1;
else
return 0;
public void setNum(double x)
num = x;
public double getNum()
return num;
public void makeCopy(DataElement otherElement)
DoubleElement temp = (DoubleElement) otherElement;
num = temp.num;
public DataElement getCopy()
DoubleElement temp = new DoubleElement(num);
return temp;
public String toString()
return String.valueOf(num);
} -
Unit Conversion Error in Direct Input method for data transfer
Hi Experts,
I am getting a error "E MG 427: Conversion error: field BMMH6-MEINH; content PAK" When I am uploading Alt. UoM using BMHH6 structure in Direct Input. I checked value for UoM in converted data it is "PAC". I think system is internally converting it to PAK so the error is coming.
Please let me know what need to be done to avoid this error.
Thanks in Advance..
-HarkamalHi
Before passing this unit to the program
check the conversion Exit in the Domain of the Field
and use the fun module
CONVERSION_EXIT_ALPHA_INPUT and pass that value and see how it takes
otherwise use the fun module UNIT_CONVERSION_SIMPLE and pass the value to program
Regards
Anji -
Please help finding pre-exsisting methods
please help find pre-existing methods
JavaFirstTime Jan 2, 2005 3:21 PM
please help clever people :)
how to output decimals in 2 decimal places only?
how to output large integers using format: 12,376,452
I've been told there are pre-existing methods for that, but i just can't find it... ideally i need to know the source code...Well, there's many ways to do it ... Here's one:
class NumberFormatDemo {
public static void main(String[] args) {
new NumberFormatDemo().go();
public void go() {
double decimal = 123.456;
System.out.println((int) decimal + "." + (int)
+ (int) (decimal * 100 + 0.5) % 100);
int largeInteger = 12376452;
System.out.println(recursive(largeInteger));
public String recursive(int largeInteger) {
if (largeInteger > 999) {
return recursive(largeInteger/1000) + ","
1000) + "," + largeInteger%1000;
} else {
return "" + largeInteger;
yes, that's exactly wot i need...
how didn't i think of that myself, using mathematics, i was thinking it would be more complicated like converting decimals to string then count letters and so on.
Thank you for putting me on the right track :) -
R3load system copy: Error on database export
Hello all,
I am trying to do a system copy via r3load - Export and then import on a WAS 640 oracle Netweaver based system which has both ABAP and JAVA stack. The source and target system are on the same win2000 host. I am getting below errors in the export stage of the system copy. I am following the sap doc: Homogeneous and Heterogeneous System Copy for SAP Systems based on SAP Web AS ABAP 6.40 SR1 .pdf
As per the doc the below are the main steps
1) Generate DLL-statements [Page 55] (Call transaction SE38 and run the program SMIGR_CREATE_DDL...Execute the program. The DDL statements are generated and are written to thespecified directory.)
2) Run SAPinst to export the database [Page 48].
3) Set up the target system [Page 60].
I am stuck at 2) with the below errors during the export.
For step 2, the sapinst asked me to enter
source <SID>
Source <DBSID>
Source schema: I gave this as SAP<SID>
no of process and alphabetic load.
Afer this...
R3ldctlExport.log reports the below errors
WARNING: no technical settings for table "WFQUE" in SAP data dictionary - defaults used
WARNING: no technical settings for table "WFSTO" in SAP data dictionary - defaults used
WARNING: value for DD28S.CONSTANTS not in quotes, view "COVMVSVW"
WARNING: value for DD28S.CONSTANTS not in quotes, view "DVTOPAY"
WARNING: value for DD28S.CONSTANTS not in quotes, view "V_LTDX"
WARNING: value for DD28S.CONSTANTS not in quotes, view "W3TEMPLATE"
DbSl Trace: ORA-24508 occured when executing SQL statement (parse error offset = 29)
ERROR: ExeRead for get_loc_table_inf failed
ORA-24508: Message 24508 not found; product=RDBMS; facility=ORA
Error generating DDLINF.TPL
(UPT) Info: Preparing tables and tablespace entries.
(UPT) Info: Distributing tables and tablespace entries.
(WLL) Info: finished writing location lists
And sapinst reports several of the below errors...
ERROR 2007-06-17 17:24:14
MSC-01015 Process finished with error(s), check log file D:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\EXP/SAPUSER.log
ERROR 2007-06-17 17:22:44
MSC-01015 Process finished with error(s), check log file D:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\EXP/SAPDODS.log
ERROR 2007-06-17 17:22:44
MSC-01015 Process finished with error(s), check log file D:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\EXP/SAPPOOL.log
ERROR 2007-06-17 17:22:44
MSC-01015 Process finished with error(s), check log file D:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\EXP/SAPSDIC.log
...etc
*.TSK files are being created.
For example, if I describe for one particular package...
SAPSSEXC.TSK has entries like the below
D DM45T E ok
D DM46S E ok
D DOKCLU E err
D DOKHL E xeq
D DOKIL E xeq
D DSYST E xeq
D DYNPSOURCE E xeq
D ENLFDIR E xeq
D EUDB E xeq
D EUGUITEXT E xeq
D EUOBJ E xeq
D EUOBJEDIT E xeq
A log file SAPSSEXC.log exists which notes the termination of the r3load export process.
EXP) TABLE: "DM42S"
(EXP) TABLE: "DM42T"
(EXP) TABLE: "DM43T"
(EXP) TABLE: "DM45L"
(EXP) TABLE: "DM45T"
(EXP) TABLE: "DM46S"
(NT) Error: DOKCLU : normal NameTab from 20041108162211 younger than alternate NameTab from 20010201171049!
Syslog: k CQF : DOKCLU &20010201171049&2004110rscpgdio 47myCluster (55.13.Exp): 874: received return code 64 from rscpCheckNTTimeStamps.
myCluster (55.13.Exp): 875: suspicious create timestamp of alternate nametab encountered.
myCluster (55.13.Exp): 879: create timestamps of nametab: 20041108162211; alternate nametab: 20010201171049.
myCluster (55.13.Exp): 297: error when retrieving physical nametab for table DOKCLU.
(CNV) ERROR: code page conversion failed
rc = 2
.--============.| RSCP - Error || Error from: Codepage handling (RSCP) 3 || code: 64 RSCPECALL Illegal mixture of procedure calls. || Altername NameTab too old || module: rscpgdio no: 47 line: 2876 T100: TS007 || TSL01: CQF p3: DOKCLU &20010201171049&2004110|| |`--
'(rscpMC) Warn: env I18N_NAMETAB_TIMESTAMPS not set
(DB) INFO: disconnected from DB
I:\usr\sap\VIK\SYS\exe\run/R3load.exe: job finished with 1 error(s)
I:\usr\sap\VIK\SYS\exe\run/R3load.exe: END OF LOG: 20070617185123
Also some of the other log files for other packages terminate with:" disconnected from db" in the middle of the export.
What I tried: I tried putting in the latest patch level for r3ldctl, r3load and r3szchk kernel files. It was at kernel patch 43. I upgraded to latest 175 from market place. And restarted sapinst again to start the export again. Again I face the same problem. Sapinst aborts at this stage again. I basically took the whole sapexedb patch 175 and yupdated the kernel but it did not help.
If any of you out there can lead me in the right direction so that I can get over this stumbling block, would be grateful.
Many Thanks, Vikram
[email protected]Could anybody please tell what is the required codepage for oracle?
Our system has NLS_LANG=AMERICAN_AMERICA.WE8DEC
Thanks a lot! -
Hi
We have a big problem, We can't create internal orders, when I run the CREATE INTERNAL ORDER, it finish with ERROR:
Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
Review your concurrent request log and/or report output file for more detailed information.
this is the log:
+---------------------------------------------------------------------------+
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
POCISO module: Create Internal Orders
+---------------------------------------------------------------------------+
Current system time is 26-JUL-2013 09:21:09
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
Begin create internal sales order
Updating Req Headers
14 Reqs selected for processing
Top of Fetch Loop
Source Operating Unit: 82
Selecting Currency Code
Currency Code : MXP
Selecting Order Type
Order Type ID:1001
Selecting Price List from Order Type
Deliver To Location Id: 196
Inserting Header : 3908784
Getting the customer id
Getting the customer id: 15334
Unhandled Exception : ORA-01403: no data found
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
Review your concurrent request log and/or report output file for more detailed information.
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
78
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 26-JUL-2013 09:21:14
+---------------------------------------------------------------------------+
Some suggestion for resolve it??
Thanks & Regards.In the document 294932.1 Section 4 there are no pre-installation patches or update for OS RedHat LinuxAS4.
When I type echo $LD_ASSUME_KERNEL it doesn't display any value so do I need to set the LD_Assume_Kernal value manually.
If yes, please let me know the path and command to set the kernel value.
Thanks
Amith -
Releasing transport request has an error during the 'export' step.
Hello Everyone,
My environment is ERP 6.0 EHP6, AIX 6.3, Oracle 11g.
We have a transport request that was created in our development system by deleting some obsolete roles. When we try to release the transport request to our q/a system it terminates with errors in the export step.
The errors are.
End of export R3TRTABUUSR10
no E071K or E071K_STR entries found for R3TRTABUUSR11
Start export R3TRTABUUSR12 ...
no E071K or E071K_STR entries found for R3TRTABUUSR13
Of course we cannot create a new transport request because the roles were deleted.
Can someone please explain to me what could have cause this type of error and possibly how to resolve it?
Regards,
RonHi Ron,
As per your log, no E071K or E071K_STR entries found forR3TRTABUUSR11
no E071K or E071K_STR entries found for R3TRTABUUSR1
Looks like there is no entry found for E071K or E071K_STR in table USR11 and USR13.
Please check those table and make sure the above entries are there, if not that could be the issues.
Also, please check if these tables (USR10, USR11, USR12 USR13) are active in SE14.
Thanks
Adil
Maybe you are looking for
-
How to transfer Vendor from SRM to SAP R/3
Hi... How to transfer Vendor registered in directly via self regstration in SRM to SAP r/3 system regds Kumar
-
I have a new iPad but I can't go into VPN option after I uninstalled vpnoneclick app
I have a new iPad and before I uninstall vpnoneclick app from AppStore I was able to set a VPN but now I can't even enter the VPN option please help me
-
Service order and Logistics Integration
How to do service order and logistic integration for availability check and reservation of material
-
NCS 1.1.1.24 migration to PI 1.2.1.012
I have an open TAC case on this also....but it's taking longer than usual for them to get pertinent info back to me so figured I'd try here. I'm in the process of migrating from WCS to Prime Infrastructure 1.2 I've already sucessfully completed the
-
Message while scheduling INIT info-package
Hi Experts, I can not see anything in monitor and not able to schedule init info-package? any help - appreciated. Init. select. for field name currently running in request REQU_D8T0NXQ3ITUM8UYN4LOKZEUNE Message no. RSM1070 Diagnosis Init. selection