Error in PROXY to File  Multiple Receivers Scenario

Hi,
While triggering an outbound proxy i get the below error.
My Scenario is Proxy to Multiple Reciver, Namely A , B and C .
Here A is Configured  with one Busness system *BS1*, B and C is for another Business system *BS2*
When the Proxy is triggered i get the File generation for receveier A but fails for Band C.it give the below error.
From PI Monitor when i restart the same message then the message gets tiggered and files are generated in the respective folders.
Please let me know if any one has come accross like below error.
  <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!--  Call Adapter
  -->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
  <SAP:Category>XIServer</SAP:Category>
  <SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
  <SAP:P1 />
  <SAP:P2 />
  <SAP:P3 />
  <SAP:P4 />
  <SAP:AdditionalText>Error while reading from the secure store: ERROR_U: No service user password found for Adapter Engine</SAP:AdditionalText>   <SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine</SAP:Stack>   <SAP:Retry>M</SAP:Retry>
  </SAP:Error>
Regards
Praveen Kalwa
Edited by: praveen kalwa on Sep 20, 2010 6:17 PM
Edited by: praveen kalwa on Sep 20, 2010 6:25 PM
Edited by: praveen kalwa on Sep 20, 2010 7:22 PM

check this
Error: Unable to find any Adapter Engines
File to Mail Scenario error
error in AE
AE_DETAILS_GET_ERROR on XI 7.0 SP06
Edited by: Rodrigo Alejandro Pertierra on Sep 20, 2010 11:35 AM

Similar Messages

  • Proxy to file : Multiple Receivers

    Hi,
    i am new to xi and I am trying a scenario in which i am passing employees data from sender (proxy) to receivers(ftp).
    I want 2 receivers.at runtime if an employee belongs to say group 1 then
    his data should be written to file1.
    if it is group 2 then it should go to file2.
    at runtime how do i determine the receivers ( file 1,file 2).
    Need ur worthy assistance in completing this.
    please guide me.
    thanks in advance.
    albert.

    Hi Albert,
    Receiver determination tells the receiver system which will receive the target msg and by which reciever comm channel.
    Interface determination tell what is the source system, source msg interface, target system, target msg interface and their interface mapping......
    Interface determination can have only one receiver but Receiver determination - you have the option of extended Receiver determination - where you can configure many recievers for yor targt msg.
    Thanks,
    Rajeev Gupta

  • Error in Proxy to File scenario

    Hello All,
    I m doing Client Proxy,  ABAP proxy to file scenario.
    I hv done all the configurations in IR & ID.
    I hv also created proxy in sender R3 system.
    But messages are not going successfully from R3.
    when i checkin SXMB_MONI of R3 i get following error
    <SAP:Stack>Error when receiving by HTTP (error code: 110, error text: )</SAP:Stack>
    Message is in SYSFAIL status in SMQ2.
    Any clues how it can be solved??
    Thanks in adv.
    Mahi

    Hi Maheshwari,
    Please try as mentioned below
    Option 1: Go to SXMB_ADM->Manage Queues and Deregister all the Queues.Use transaction SMQR or SMQ2 to reset the status of queues
    For this to initiate processing of messages stuck in the queue, make sure to set following IS configuration parameter
    MONITOR QRFC_RESTART_ALLOWED to value 1
    Option 2: Check the user associated with the RFC destination AI_RUNTIME_JCOSERVER in sm59 transaction. It is generally SAPJSF. Might be posisble the user password is expired or locked. Log on to j2ee admin tool on the server side and update the password and then see if it works.
    Thanks
    Amit
    Reward points if answer is helpful

  • Error on PROXY to FILE scenario

    Hi,
    I'm working on a Proxy to FIle Scenario. 1 Proxy is triggered and 7 files should be generated at the target side.
    Now when the proxy is triggered all the 7 files doesn't get generated. Instead randomly some 3-4 files are getting generated.
    Could not see the rest of the entries in MONI also.
    Can someone tell how to monitor this and where exactly to check for the error, as message doesn't reach the MONI and we don't have a sender channel beacuse its Proxy.
    Thanks,
    Vikas

    Vikas,
    Can someone tell how to monitor this and where exactly to check for the error, as message doesn't reach the MONI and we don't have a sender channel beacuse its Proxy.
    > how 7 files will generate ?
    From Proxy level @ ECC it don't seems logical/possible as whole data will be passed as a whole to proxy interface and on some condition basis only you would be creating 7...files . so definitely at SXMB_MONI of XI you can see this .
    Try to increase trace_level parameter to 3 (only in development box , as it will consume the server very fast) for better monitoring .
    Since the no. of files will be created by file adapter only so those many no. of receiver file adapter calls you can see at RWB.
    Regards,

  • Error in Proxy to File :no msg in sxmb_moni in application system

    Hi all
    i am doing a Proxy to file scenario.i have executed the scenario successfully and the file is created once. from next time i am executing the scenario it is picking the data in ECC and sending data to proxy method (checked through debugging),but it is not showing the message in sxmb_moni for the second time and is not reaching xi.It is only displaying the message processed for the first time.
    i have not done any changes in design but few modifications like changing the date format in abap pgm.
    plz provide the solution and can any one why there is no message in sxmb_moni?
    Regards
    satish

    Hi,
    Check the following
    1. RFC connection between R/3 and PI
    2. You said Business system of type third party (PI) is receiving it. Try Business system standalone Java. If PI system is already defined in Landscape as Integration server. It will not show any message output.
    3. message is shown in sxmb_moni in your ERP that measn proxy is able to receive all objects and passed it from there.
    4. Check in SMQ2 outbound queue of ERP as well as inbound queue for PI if message exist.
    5. While configuring in ID you dont need a sender agreement. Did you created one.
    and finally Check in SMQ2 transaction if the messages are waiting there. If yes, unlock and release queue.
    regards,
    Surya

  • Error while doing a File to IDOC scenario

    Hi Experts,
    I have created a File to IDOC scenario where in i have sent a file which has to pass data to ABSEN1 IDOC.I could see the IDOC reaching R/3 ,but with the status 56: "EDI: Partner profile inbound not available"
    I have checked with all the configurations and couldnt find where it went wrong.
    Kindly help me in this regard.
    Thanks.

    Hi
    Check the inbound parameter and the process code.
    To find Process code for IDoc use Tcode WE42.
    ALE idoc trouble shooting use
    Troubleshooting of ALE Process
    look also this configuration
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34

  • Doubt on server proxy and file to idoc scenario

    Hi,
         I could able to solve most of my doubts from this forum, many regards to all who assisted me.Here are some simple doubts plz help me in solving them.
              1.In FILE to PROXY scenario is it necessary to create rfc destination on IS and receiver system? becoz in some blogs it is written to create RFC dest only in case of CLIENT PROXY,since we XI adapter to connect receiver syst in case of server proxy?
              2.In FILE to IDOC scen at receiver side is it necessary to formalities in SM59,WE21,WE20 or just configure in WE20 to maintain partner profile?
              3. In case of single SLD for DEV,CON,PROD while transferring from DEV TO CON using file system how do we move file in EXPORT DIRECTORY TO IMPORT DIRECTORY of cons system?
              4.for transporting IR objects we can use TRANSPORT LIST or CHANGE LIST which will be more preferable?
              Plz kindly answer to any of questions u know ?
              Points will be rewarded for valuable answers.
                                                                                    Regards,
                                                                                    Smitha.

    > 1.In FILE to PROXY scenario is it necessary
    > to create rfc destination on IS and receiver system?
    > becoz in some blogs it is written to create RFC dest
    > only in case of CLIENT PROXY,since we XI adapter to
    > connect receiver syst in case of server proxy?
    You need to maintain the setting on your R3 system to connect to XI for the Transaction SPROXY as shown in the blog "How to Activate ABAP Proxies".
    Apart from that as you are doing a file to proxy via XI, XI would need to send data to the R3 system . For this, you can either key in the Details of the R3 system in the XI adapter directly or you can maintain a HTTP destination on your XI in SM59 and use this in the XI adaper.
    > 2.In FILE to IDOC scen at receiver side is
    > it necessary to formalities in SM59,WE21,WE20 or
    >  just configure in WE20 to maintain partner profile?
    Just the partner porfile. SM 59 and We 21 are used for port and RFC destination and as it is XI that is posting the Idoc these steps are not needed on R3
    > 3. In case of single SLD for DEV,CON,PROD
    > while transferring from DEV TO CON using file system
    > how do we move file in EXPORT DIRECTORY TO IMPORT
    >  DIRECTORY of cons system?
    You have to go to the Folder Level / OS level of your XI server, copy the files from the Export DIrectory and move these manually to the import folder of the CONS server. This is for both IR and ID objects.
    > 4.for transporting IR objects we can use
    > TRANSPORT LIST or CHANGE LIST which will be more
    >  preferable?
    If you perfrom File Transport, the imported objects will be available under the Import Change List and you need to activate this Import Change List.
    Regards
    Bhavesh

  • File to File, multiple receivers, file name shrink between IE and AE

    Hi Expetrs,
    I have a scenario, where there is a FTP sender adapter with adpater specific message attributes on for file name and folder. Then on Integration Engine, the message is sent to two receivers and the messages go back to Adapter engine. On receiver communicate via FTP including secure connection, one NFS... But what I see is that the file name is different for NFS and FTP receiver. NFS file name is shrinked, and FTP contains the source value...
    The point is that when I'm checking message header on adapter engine for NFS receiver I see that the file name is shrinked from
    DBDC-PROD_GMA_28042014060034679_AFB120.SNL18169D11398664841838226S
    to
    DBDC-PROD_GMA_28042014060034679_AFB120.SNL1816
    For FTP it is ok.
    On Integration engine both messages contains still correct file name, so I believe the file name is shrinked on AE...
    Do you know why?
    Best regards,
    Milan

    Hi Iñaki,
    You mean the receiver business system OS? How does the adapter engine knows the receiver OS?...
    I really see in AE in message header for two messages two different file names, even the source is just one message with one file name... I think this is really some kind of issue in PI.
    Thanks for answer,
    Milan

  • Runtime Error: How to Reprocess File-XI-IDoc scenario

    Hi All,
    I'm working a file adapter to XI to IDoc scenario.  My XI message has about 2,000 records in it and one of those records contains an error (due to an invalid character in a description).  My question is in a production environment would it be somehow possible for me to reprocess this erred message and post the remaining 1,999 records that do not have an invalid character?  What are my options to progress?

    Thanks Bhavesh,
    Not sure what additional details you need but I'll give it a go.  I've got an input file that contains lets say 100,000 rows of data and each row is a separate record.  I use sender file adapter using file content conversion with fixed length definition.  I send that through a simple mapping program that will generate 100,000 IDocs.  I'll get 50 XI messages each containing 2,000 records (recordsets per message)
    Because of an invalid character in the source file (an "escape" character) in SXMB_MONI I get a red flag.  The error message is essentially "com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x1b".
    Since the XI message errors none of the IDocs for the 2,000 records in that message gets created even though 1,999 of them are OK.
    So my question is basically is there a way for me to restart this message via SXMB_MONI (or another way) so the other 1,999 records will process OK leaving me with the error to deal with later?
    Thanks again!

  • Proxy to File Synchronous Scenario

    Hello,
    My scenario is 
    SAP System ----->(Proxy)   PI -------->(File)  FTP
    Synchronous Scenario
    I have been using the RequestResponseBean and ResponseOnewayBean module in the Sender Request Adapter channel to convert the file adapter from Asynchrounous to Synchronous scenario.
    While Triggering Data From Proxy the receiver request channel is placing the file in the FTP.
    But the sender Response channel is saying that "No suitable Sender  agreement found" error.
    Also in the Audit log :SOAP: call failed com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error encountered while executing mapping: com.sap.aii.af.service.mapping.MappingException: 204 .
    Getting the above error.
    Also I need the Sender Response Channel to pick the file after 10 minutes of placing the file in the FTP by the receiver Request channel.
    Please help on this.

    My question is , can I use graphical mapping as I am using a java class for content conversion?
    You can use as long as the structure generatde by the JAVA program is same as the source-message structure of the message mapping.
    I have developed a java code for content conversion and it is working fine. How to use this .jar file in XI?
    In my opinion this should be the adapter module....as the conversion needs to be done in the channel and inclucing it as a mapping wont help.
    Regards,
    Abhishek.

  • Error while doing file to mail scenario

    Hai All,
              I am getting the following errors while doing the file to mail scenario.
    Error:Exception caught by adapter framework: Failed to call the endpoint
    Error:Delivery of the message to the application using connection AFW failed, due to: Failed to call the endpoint.
    Can anyone please give me solution...

    Try this:
    Re: "Could not determine code page" inbound side error
    and this
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660

  • Proxy to File

    Hi eXperts,
       I am developing an ABAP Proxy scenario where I have to get data from the Internal table and then send to a Legasy system as a FLAT FILE.
    I have developed a sample code and providing in SDN to get me corrected if any errors.
    Proxy to File Data Structure.
    DT_S                               
       ROOT     1-un
             SI      1-1
             S2     1-1
             S3     1-1
    MT_S
    MI_S
    Client Proxy Structure
    ^Class ZXX_CO_MI_S
         ^METHOD EXECUTE_ASYNCHRONOUS
              ^IMPORTING   OUTPUT                            ZXX_MT_S
                    ^MT_S                                               ZXX_DT_S
                        ^ROOT
                             S1       STRING
                             S2     STRING                                              
                             S3     STRING
    ZProgram. 
    Tables : lfa1.     
    Parameters : P_Date type lfa1-aedat.
    Types for export parameters.
    DATA : Pur_order type Zxx_mt_s.
    *For calling class and exceptions.
    Data : client_proxy type ref to ZXX_CO_MI_S,
               Sys_exception  type ref to CX_AI_SYSTEM_FAULT,
               APPL_Exception type ref to AI_APPLICATION_FAULT.
    Data : Begin of it_out occurs 0,
                    Lifnr like lfa1-lifnr,
                    Name1 like lfa1-name1,
                    Land1 like lfa1-land1,
                End of it_itab.
    Select lifnr, name1, land1 from lfa1 into table it_itab where aedat = p_date.
    Loop at it_itab.
            Pur_order-mt_s-root-s1 = it_itab-lifnr.
            Pur_order-mt_s-root-s2 = it_itab-name.1
            Pur_order-mt_s-root-s3 = it_itab-land1.
       Clear it_itab.
    Endloop.
    *Create Proxy object and call method.
    CREATE OBJECT CLIENT_PROXY().
    TRY
    CALL METHOD CLIENT_PROXY -> EXECUTE_ASYCHRONOUS
            EXPORTING
                  OUTPUT = PUR_ORDER.
    If sy-subrc = 0.
    Write: / ‘Method called successfully.’
    Else.
    Write: / ‘Method called failed.’
    Endif.
    *exception handling.
    CATCH CX_AI_SYSTEM_FAULT   INTO   SYS_EXCEPTION.
    Write : / ‘System fault encountered.’
    Write : / SYS_EXCEPTION -> ERROR TEXT.
    RETURN.
    CATCH CX_AI_APPLICATION_FAULT   INTO   APPL_EXCEPTION.
    Write : / ‘Application fault encountered.’
    RETURN.
    ENDTRY.
    COMMIT WORK.
    Please Very Urgent.
    thanks in advance...

    u r not passing the itab data to proxy.
    pass the data to proxy before calling method..
    client_proxy-MT_S ZXX_DT_S-ROOT[] = it_tab[].
    *Create Proxy object and call method.
    CREATE OBJECT CLIENT_PROXY().
    TRY
    CALL METHOD CLIENT_PROXY -> EXECUTE_ASYCHRONOUS
    EXPORTING
    OUTPUT = PUR_ORDER.
    If sy-subrc = 0.
    Write: / ‘Method called successfully.’
    Else.
    Write: / ‘Method called failed.’
    Endif.
    *exception handling.
    CATCH CX_AI_SYSTEM_FAULT INTO SYS_EXCEPTION.
    Write : / ‘System fault encountered.’
    Write : / SYS_EXCEPTION -> ERROR TEXT.
    RETURN.
    CATCH CX_AI_APPLICATION_FAULT INTO APPL_EXCEPTION.
    Write : / ‘Application fault encountered.’
    RETURN.
    ENDTRY.
    COMMIT WORK.
    Please Very Urgent.
    thanks in advance...

  • Configuring multiple receivers without bpm

    Hi,
    I want to configure a scenario like idoc-xi-file (multiple receivers). The file has to be send to particular receiver on the basis of some condition which is kept on the particular field of idoc strucutre.
    I am basically a learner and can you please suggest some good blogs or materials to configure this particular scenario ?? Any material with step by step screen shots is highly appreciated.
    thanks
    kumar

    Hi,
    there's nothing special in configuration to achive that
    1. create a few business systems (or business service in ID)
    2. create your receiver determination and inside put all those receivers
    3. when you add a new receiver to receiver determination
    you can choose conditions column and specify when (which IDOC field
    must have what kind of value) and this will do the routing for you
    it's all in standard and very simple
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Proxy to file scenario - strange error

    Hi,
    we r finding a strange error occurring in our prd system. we have many scenarios of proxy to file and they all are running fine. the problem which is arising from the last few days is that - for some outbound interfaces at random, the message is generated in ECC, sent to XI and its file generated in local system of XI - this is fine - but what is happening as strange is the message is again getting processed in SMQ2 queue of ECC - this is the duplicate msg of the original msg - we can say this is duplicate msg becoz the msg id of the original msg in ECC, is available in XI with the same msg id and this erroring msg in SMQ2 is having the same msg id again - suggesting that somehow ECC is trying to process the same msg again.
    has anyone seen this type of error before. pls suggest how to rectify this error.

    hi,
    no upgrade happened recently.
    in ECC in SMQ2 queue the msg is erroring with error XI server CLIENT_RECEIVE_FAILED. INTERNAL Queue stopped. In SXMB_MONI in ECC the msg is erroring with :
    <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
      <SAP:P1>402</SAP:P1>
      <SAP:P2>ICM_HTTP_TIMEOUT</SAP:P2>
    Error while receiving by HTTP (error code: 402, error text: ICM_HTTP_TIMEOUT)
    the scenario is async outbound proxy to file scenario. it is happening randomly for any interface and only a few times eg 1 msg out of 300 msg in a day is having this duplicate msg error.
    Please suggest.

  • Error in File-XI-JDBC Scenario

    Dear All,
    I am working on File-XI-JDBC scenario which is using stored procedure (SP_UPDATE). When I am processing the file it is giving me the following error in the message monitoring:
    Unable to execute statement for table or stored procedure. 'SP_UPDATE' (Structure 'Statement') due to java.sql.SQLException: ERROR: Invalid XML document format for stored procedure: 'type="<SQL-type>"' attribute is missing for element 'access' (Setting a SQL-type (e.g. INTEGER, CHAR, DATE etc.) is mandatory !)
    Please guide me what is this error all about and how this can be resolved.
    Warm Regards,
    N.Jain

    Dear All,
    Now, I am able to update the SQL Server database but only one record is coming at the target. Can anyone please guide me what is he error in my Data types o in my mappings. Following is the source Data Type:
    MT_TEST_FILE_T179T      1..1     DT_TEST_FILE_T179T
         ROOT                         1..unbounded
            PRODH                    1..unbounded     xsd:string
            VTEXT                      1..unbounded     xsd:string
            DATUM                     1..unbounded     xsd:string
    Following is the target Data Type:
    MT_TEST_JDBC_T179T      1..1     DT_TEST_JDBC_T179T
         STATEMENT                1..1
            SP_UPDATE             1..1
                action                    required     xsd:string
                TABLE                  1..1                     xsd:string     
                    PRODH             1..unbounded     xsd:string
                       type               optional            xsd:string
                    VTEXT               1..unbounded     xsd:string
                       type               optional            xsd:string
                    DATUM              1..unbounded     xsd:string
                       type               optional            xsd:string
    Following are the mappings done:
    EXECUTE-->@action
    storedprocedurename-->TABLE
    PRODH-->PRODH
    VTEXT-->VTEXT
    DATUM-->DATUM
    CHAR-->@type.
    With this stucture and mapping i am able to insert only one recored in the database even though there are multiple entries in the file.
    Please guide me in solving this error so that multiple records can be inserted.
    Warm Regards,
    N.Jain

Maybe you are looking for