Error in running Report painter

Hi,
when we try to execute a Report painter program it is giving a error
Library 6O1: Key figure Z_JSWKG in set 0000CO_D_ACPLCO2.CCSS is not allowed
any one have idear about this error.
Thanks ,
senthil

Hi,
You have define key figure Z-JSWKG wrongly.Go to transaction code GS32 & give the table name as CCSS & Go to the bottom where you will find the z catagory key figures .Double click on this above mention key figure & change the set name. It will serve your purpose.
Regards,
Abhijit

Similar Messages

FRM-92101 error while running report from a button or menu

Hi All,
I am getting the error FRM-92101 while running report without parameter from a button or menu. I am using Developer Suit 10g. I get the error as it shows there has some configuration problem in my form. Will you please help me anyone how can i solve the problem. My previous forms running very well both with parameter and without parameter.
Arif

Hello Sir,
Thanks for your cooperation. I have solved my problem by myself. The fact was that, when i tried with the following code which made my report---
SELECT br.bid, br.bname, br.branchtxnstatus, dif.difference
FROM branch br,
(SELECT gladbrid branchid,
SUM
(CASE
WHEN ga.gl_acc_categry IN ('L', 'I')
THEN gd.gladbalance
ELSE -1 * gd.gladbalance
END
) AS difference
FROM glaccount ga, glaccountdetail gd
WHERE ga.glid = gd.gladglid
GROUP BY gladbrid) dif
WHERE dif.branchid = br.bid AND br.branchtxnstatus = :Br_Status
and dif.difference!=0
ORDER BY br.bid;
and the code against the button or menu item is---
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('ASSET');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
which has shown the error FRM-92101 and didn't run the report.
In that case I have changed the query to run the report. first of all i create a view following the query and build the report using a simple select query. that's etc. my report running fine now.
It is mentioned that there had no error on my codes.
Arif

Timeout error while running Report

Hi
All,
Windows 2000
Oracle Report builder 10g
Oracle developer suite 10g
when I had OLD computer i was able to run report more than 10 minutes. Now, I got NEW computer and i am getting TIMEOUT error while running report more than 10 minutes.
Any clue?
Thanks,
Vishal

As Fs says it depends on how you're running the report.
If you're running via a server then you need to make the change on that server or amend the URL you are using to run the report to add the enginereponsetimeout parameter.
You can amend this parameter on the server either by using the Application Server Control as I described in my last post or by directly editing the config file. This file will be called <reportservername>.conf and can be found in the oracle_home/reports/conf directory.
In this file look for the engine tag and see if the engineResponseTimeOut property is set.
E.g:
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="20" callbackTimeOut="90000" engineResponseTimeOut="5">
</engine>
This value is in minutes so increase to a time larger than that it takes to run the report.
If instead you're running the report via Report Builder on your own PC then look for a file called rwbuilder.conf in the same location on your PC and make the same change as described above.
If this property isn't in the file then the engine isn't supposed to time out at all so the problem may well be something different. But to discount it try setting to a large value like 30.

ERROR WHILE RUNNING REPORT THROUGH FORMS.....!

hi all,
ive designed one form in Forms 9i...I'm tryin to run report through a Push button .....report is running well in paper layout through report builder 9i...The problem I'm facing is dat when i pressed button it is giving me error initially as FRM-41214 cannot run report and after that FRM-40735 When button pressed unhandled exception ora-06502.....What could go wrong??... Ive started OC4J instance ....created report object in object nevigator as well and defined basic properties for diff.parameters HTMLCSS,CACHE..etc.,mentioned report path in complete i.e.c:\reports\genbill.rdf ...Can anybody help me out ??? Thnx.!
-----------------------CODE ON BUTTON----------------------------------
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('REPORT5');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('<HOSTNAME>:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=myrepserver','_blank');
ELSE
message('Error when running report');
END IF;
PAUSE;
END;

When a report terminates with an error, REPORT_OBJECT_STATUS returns the value "TERMINATED_WITH_ERROR", which is 21 bytes of data, but rep_status is defined as 20 bytes. The 6502 error is due to the data not fitting the variable.
I recommend wrapping the REPORT_OBJECT_STATUS function with a SUBSTR that limits the data returned to 20 bytes, which will ensure the results fit.
For example:
rep_status := SUBSTR(REPORT_OBJECT_STATUS(v_rep), 1, 20);

Error while running report 10g

DECLARE
     repid REPORT_OBJECT;
     v_rep VARCHAR2(1000);
rep_status VARCHAR2(2000);
BEGIN
     repid := find_report_object('REPORT2');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
set_report_object_property(repid, report_comm_mode, 1);
set_report_object_property(repid, report_destype, cache);
set_report_object_property(repid, report_desformat, 'PDF');
set_report_object_property(repid, report_server, 'myserver');
v_rep := run_report_object(repid);
rep_status := report_object_status(v_rep);
WHILE rep_status IN ('RUNNING', 'OPENING_REPORT', 'ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
message(rep_status);
IF rep_status = 'FINISHED'
THEN
web.show_document('http://localhost:8889/reports/rwservlet/showjobid' || substr(v_rep, instr(v_rep, '_', -1) + 1)
|| '?server = myserver');
ELSE
message('error while running reports-object ' || error_text);
message(' ');
clear_message;
END IF;
EXCEPTION
     WHEN OTHERS THEN
message('error while running reports-object' || error_text );
END;
I have been trying the whole 5 days running this report but it is giving me error, i am making simple report which select all data and display from emp table, please help. Error I am getting is unable to run the report and Terminated_Report.

Hi,
Check this link...How to call a report in Forms 10g ?
Hope this works...
Hamid

FRM-92101 error while running report from form

HI All,
I am getting the form error FRM-92101 while running report from form menu.My code is given below:
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('REPORT47');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
--Arif

hi Arif
Please see this note on MOS/Metalink for some common causes of this error:
Known Causes of FRM-92101 Error In Forms [ID 604633.1]
thanks,
AMN

Error when running reports: "File Server needs to be re-initialized"

Hi.
This error "File Server needs to be re-initialized" appears when our users try to run reports on 11.5.10. EBS.
There is also a message box that appears and reads:
"A error occurred while attempting to establish a conection to Application File Server. There may be a network configuration problem, or the TNS listener may not be running."
This is a problem in our test environment. We recently ran autoconfig on the test side.
I have checked Metalink and also wider google search.
Perhaps we have an issue with the tnsnames files? Well, I verified this and the tnsnames in production and test, and they are the same.
Perhaps a listener.ora file issue?
"The issue is caused by the variables APPLFSTT and APPLFSWD is not being set properly in the <8.0.6_ORACLE_HOME> listener.ora file. " (Note 263654.1)
I am trying to verify the meaning of the following (in listener):
( SID_DESC = ( SID_NAME = FNDFS )
( ORACLE_HOME = /oracli2/oracle/testora/8.0.6 )
,APPLFSTT=
TEST_BALANCE;TEST;PROD_806_BALANCE;TEST_FO;TEST_806_BALANCE;PROD_FO,APPLFSWD=/or
acli2/oracle/testappl/admin;/oracli2/oracle/testcomn/temp;/oracli2/oracle/testco
mn/html/oam/nonUix/launchMode/restricted' )
In the APPLFSTT entry, should there be any mention of "PROD" ? Shouldnt this all be changed to TEST?
Also, comparing this to the PROD listener, the order of APPLFSTT is different:
TEST: APPLFSTT=
TEST_BALANCE;TEST;PROD_806_BALANCE;TEST_FO;TEST_806_BALANCE
PROD:APPLFSTT=
PROD_806_BALANCE;PROD;PROD_BALANCE;PROD_FO,
I have made a copy of our listener in TEst, so I can edit the existing one. Trouble is, not sure if I even should try to edit it!
Any suggestions, much appreciated.
Oracle 9.2.0. AIX 5.2.
Notes covered in Metalink:
274177.1
303971.1
304568.1
263654.1

Yes thanks for that. Metalink has informed me to do the same, basically.
But I am in the middle of a cloning, so I will finish that then run autoconfig once again.
I already ran Autoconfig on both source and target, so will do again once this process is over.
Cheers.
DA

Error when running reports on the WEB

Hi,
I have been successful in deploying our application on the Web,
using WebDB listener, Developer Server, Report Server and JInitiator 1.1.7.18.
Now the forms on the web runs fine without any problem but
when I run Reports from Forms using RUN_PRODUCT built-in by passing parameters from Forms to Reports it generates this following error: REP-0081-Error During I/O operation and REP-0110: Unable to open file "<<file>>.html" scaba 14.
The strange thing about the REP-0110 is, it refer to a path that is not defined in my registry(FORMS60_OUTPUT,_MAPPING, REPORTS60_PATH,_TMP,_WEBLOC,_WEBLOC_TRANSLATED) and neither my physical directory in the directory mappings which I defined on the web server. (I refer to a the path mindpack4.1 and the REP-0110 refer to mindpack4_1)
Any help appreciated.
Thanks

Hello pals,
i have set the following parameters: TMPDIR and REPORTS60_TMP...
and it seems to be working!!!
i hope that the problem is not somewhere else.
NB. I was having problems with 2 reports only. the others were
working fine.
any comments will be most welcomed.
regards
Yogeeraj

Error while running report..

Hi, We use 9iAS on linux and while running one report , we get this error:
REP-0177: Error while running in remote server
REP-300: date format is too long for internal buffer
(sign(decode( ==> trunc(imp.tnr_matu_date),
When i run the same report on my system (WINDOWS) it runs fine..Even on my dev UNIX box , it runs without any problem..Could somebody help me out?Thanks..

Hi
Check that eul user discoverer user has the select right to the data table(s).
Ott Karesz
http://www.trendo-kft.hu

Getting Error while running Report on Enterprise Report console

Hi all,
I am using Report builder 6i, I have developed one report and configued it on Enterprise Reporting tool but when tried to run it through Enterprise Reporting Console I got the following error
REP-0177: Error while running in remote serverREP-0736: There exist uncompiled program unit(s).REP-1247: Report contains uncompiled PL/SQL. FAIL 1
although the report is running fine through the report builder.
any thoughts?
Thanks in advance
Manvar
Message was edited by:
[email protected]

Hello,
Do you reproduce the error if you implment the example provided in the document :
Oracle Application Server 10G -Integrating Oracle Reports in Oracle Forms Services applications:
http://www.oracle.com/wocportal/page/wocprod/ver-31/ocom/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
Regards

"Failed to open report" error while running reports using Crystal Report

We have a web application develeoped in ASP.Net, SQL Server 2005 , Crystal Reports 10.0. Sometimes if a large number of users run reports from their individual nodes they receive an error "Failed to open report ", if we restart the IIS they are able to run the reports. In addition to this the users also sometimes get the error "Maximum Report limit attained". Can any one provide me with a solution other than restarting the IIS.

Hi,
Use the close and dispose method for Report object. Its a best practice to code also gc.collect for garbage collection.
It might help you!!
Regards,
Amit

"Failed to open report" error while running reports

We have a web application develeoped in ASP.Net, SQL Server 2005 , Crystal Reports 10.0. Sometimes if a large number of users run reports from their individual nodes they receive an error "Failed to open report ", if we restart the IIS they are able to run the reports. In addition to this the users also sometimes get the error "Maximum Report limit attained". Can any one provide me with a solution other than restarting the IIS.

Hi Balla
If you face this issue only while running the reports from a .Net web application, then please post this thread to the sdk development forum.
You can follow the link below:
https://www.sdn.sap.com/irj/sdn/businessobjects-sdk-forums
Thanks

Proxy error when running reports in Infoview

We are running XI 3.1 sp4 and are getting a Proxy error on some reports when running in PDF mode. Any ideas?
Here's the error:
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET /AnalyticalReporting/ViewAsPDF/Disposition Analysis Report.pdf.
Reason: Error reading from remote server
Apache Server at preprod.nalts.com Port 443

Hi Sylvia,
It seems that the reverse proxy you are using: Apache could have problems with the sessions of the users. I have seen the same behaviour with other Load Balancers. If you have different WAS in the backend, make sure they stay with the same WAS (session affinity).
Regards,
Julian

REP-300 Error while running report using App Server

Hi,
I am currently trying to run a report using the Application Server.
This report is being called from a form.
I am able to connect to the report server and all configurations seems to be correct.
But when I execute the report from the form, I am getting error "Unable to run report"
When I look at the error message in the Report Server queue, I find
"REP-300 Table or View does not exist.."
But that table does exist in the database.
What could be be the problem ?
Please help.
The code in the form that calls the report is
report_id := FIND_REPORT_OBJECT( report_name );
vc_user_name:=get_application_property(username);
vc_user_password:=get_application_property(password);
vc_user_connect:=get_application_property(connect_string);
vc_connect:=vc_user_name||'/'||vc_user_password||'@'||vc_user_connect;
SET_REPORT_OBJECT_PROPERTY(report_id ,REPORT_OTHER, 'paramform=yes p_user_connect='||vc_connect ||' p_servername=repsrv'||' p_action=<host>/reports/rwservlet?' );
v_rep := RUN_REPORT_OBJECT(report_id, parmlist_id);

The report is working perfectly fine when I run it from the Report Builder. I get the correct output.
I am getting this error when I try to run the report through a Report server.
I run the form from the Forms 10g builder. This form has a button "Run Report". When I click on the button the report is run using the Report server.
This is when I get the error.
There are other forms that are also called via the same form. Those work fine. The only difference between those forms and this one is that this one has user parameters passed to it. This one also has an attached library attached to it.
The code in the Form to call the report is
report_id := FIND_REPORT_OBJECT( report_name );
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESTYPE, FILE);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESFORMAT, 'pdf');
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_SERVER, 'rep-vena01-xp');
v_rep := RUN_REPORT_OBJECT(report_id, parmlist_id );
v_jobid := substr( v_rep, length( v_reportserver) + 2, length(v_rep) );
v_repstatus := REPORT_OBJECT_STATUS( v_rep );
IF ( v_repstatus = 'FINISHED' ) THEN
v_url := '/reports/rwservlet/getjobid' || v_jobid || '?server=' || v_reportserver ;
web.show_document( v_url, '_BLANK' );
END IF;

Error in the Report Painter standard reports delivered by SAP library 1VK

Hi,
The Report Painter standard reports delivered by SAP contain the following errors, after the upgrade from 4.6C to ECC 6.0,in the report 1LMA-001 (library 1VK, report group 1LMA), actual for activity types
are missing.
I already copy from client 000 and generated, but still missing the actual for the activity types.
Thanks in advanced for you support,
Susana

Hi,
Firts of all thanks for you answer.
Process flow:
1. production order confirmation CO11N
2. after production confirmation if we check the in order CO03 cost/analysis, the actual for the activity is there.
3. afterwards with we execute report S_ALR_87013646, the actual for the activity type is missing.
Report group 1LMA-001 library 1VK.
I already did:
1. GR59
2. Report RGRJBG00
3. OKB6
Regards,
Susana

Error in running Report painter

Similar Messages

Maybe you are looking for