Error in sales order creation using FM IDOC_INPUT_ORDERS
Hi experts,
I am using FM IDOC_INPUT_ORDERS for IDoc processing for creating sales order.
I have added customized fields over VA03 screen and to VBAP table.
I am using user exit EXIT_SAPLVEDA_001 for populating these additional fields.
Here I am writing below code for customized segment:
WHEN 'Z1EDP01'.
x_Z1EDP01 = segment-sdata.
xvbap-ZZNETWR = x_Z1EDP01-ZZNETWR.
xvbap-ZZTAX = x_Z1EDP01-ZZTAX.
xvbap-ZZGRSWR = x_Z1EDP01-ZZGRSWR.
Move-Corresponding xvbap to dxvbap.
After this, sales order is getting created but these additional fields are not populated over the VA03 screen. Can you tell me whats wrong in code or any configuration error?
Thanks,
~Sachin
DXVBAP is an internal table for this exit, where do you modify the line of this itab. (can you post the code with the READ TABLE dxvbap and MODIFY wa/fs statements)
([Note 753153 - FAQ: Customer-functions in IDOC_INPUT_ORDERS|https://service.sap.com/sap/support/notes/753153])
Regards,
Raymond
Similar Messages
-
Error in sales order creation using bapi
Hi,
Iam trying to create sales order by using BAPI_SALESORDER_CREATEFROMDAT1 and when iam trying to execute
the function module by passing all th eparameters and iam getting the error as
inspite of entering sold_to_party and ship_to_party details in table ORDER_PARTNERS
"enter the sold_to_party or ship to party details"
please help me out in this isue its an urgent.
Thanks.
sayed.Can you share the codes ?
Thanks.
Ashish -
Error in sales order creation using BAPI_SALESORDER_CREATEFROMDAT2
Hi all,
Pl look into below code :
Here order is getting created , however ship to party and sold to party shows the same value.
*& Report ZSD_SALEORDCRE
report zsd_saleordcre.
Order header:*
- Order type: OR Important you must use the german code TA*
- Sales org: 1000*
- Distrb. chan.: 10*
- Division: 00*
- Sold to party: 1032*
- Ship to party: 1032*
- Purch order: DG-19970626-3*
Order item:*
- Material: P-100*
- Qty: 1*
data:
Order partners*
li_order_partners type standard table of bapiparnr,
l_order_partners like bapiparnr,
Structures for order header*
l_order_header_in like bapisdhd1,
l_order_header_inx like bapisdhd1x,
Tables for order items*
li_order_items_in type standard table of bapisditm,
l_order_items_in like bapisditm,
li_order_items_inx type standard table of bapisditmx,
l_order_items_inx like bapisditmx,
schedules*
li_order_schedules_in type standard table of bapischdl,
l_order_schedules_in like bapischdl,
li_order_schedules_inx type standard table of bapischdl,
l_order_schedules_inx like bapischdl,
Return table from bapi call*
li_return type standard table of bapiret2,
l_return type bapiret2,
Sales document number*
l_vbeln like bapivbeln-vbeln,
Error flag*
l_errflag(1) type c.
start-of-selection.
Build partner information*
clear l_order_partners.
l_order_partners-partn_role = 'WE'. "Remember German codes !
l_order_partners-partn_numb = '0000000101'.
append l_order_partners to li_order_partners.
l_order_partners-partn_role = 'SP'. "Remember German codes !
l_order_partners-partn_numb = '0000000107'.
append l_order_partners to li_order_partners.
Build order header*
Update flag*
l_order_header_inx-updateflag = 'I'.
Sales document type*
l_order_header_in-doc_type = 'ZOD2'. "Remember German codes !
l_order_header_inx-doc_type = 'X'.
Sales organization*
l_order_header_in-sales_org = '1100'.
l_order_header_inx-sales_org = 'X'.
Distribution channel*
l_order_header_in-distr_chan = '20'.
l_order_header_inx-distr_chan = 'X'.
Division*
l_order_header_in-division = '10'.
l_order_header_inx-division = 'X'.
Purchase order*
l_order_header_in-purch_no_c = 'DG-19970626-300'.
l_order_header_inx-purch_no_c = 'X'.
l_order_header_in-purch_date = '20090817'.
l_order_header_inx-purch_date = 'X'.
Build order item(s) - Only 1 is used in this example*
l_order_items_in-itm_number = '10'.
l_order_items_inx-itm_number = 'X'.
l_order_items_in-material = '29019501AA'.
l_order_items_inx-material = 'X'.
l_order_items_in-plant = 'WH03'.
l_order_items_inx-plant = 'X'.
append l_order_items_in to li_order_items_in.
l_order_items_in-itm_number = '20'.
l_order_items_inx-itm_number = 'X'.
l_order_items_in-material = '29066641'.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = l_order_items_in-material
importing
output = l_order_items_in-material.
l_order_items_inx-material = 'X'.
l_order_items_in-plant = 'WH03'.
l_order_items_inx-plant = 'X'.
append l_order_items_in to li_order_items_in.
l_order_items_inx-updateflag = 'I'.
append l_order_items_inx to li_order_items_inx.
l_order_schedules_in-itm_number = '10'.
l_order_schedules_in-req_qty = '10.00'.
append l_order_schedules_in to li_order_schedules_in.
l_order_schedules_in-itm_number = '20'.
l_order_schedules_in-req_qty = '20.00'.
append l_order_schedules_in to li_order_schedules_in.
CALL Bapi*
call function 'BAPI_SALESORDER_CREATEFROMDAT2'
exporting
order_header_in = l_order_header_in
order_header_inx = l_order_header_inx
testrun = ' '
importing
salesdocument = l_vbeln
tables
return = li_return
order_items_in = li_order_items_in
order_items_inx = li_order_items_inx
order_partners = li_order_partners
order_schedules_in = li_order_schedules_in.
order_schedules_inx = li_order_schedules_inx.*
end-of-selection.
Check and write Return table*
clear l_errflag.
write: / 'Sales dcoument: ', l_vbeln.
loop at li_return into l_return.
write: / l_return-type, l_return-message(50).
if l_return-type = 'E'.
l_errflag = 'X'.
endif.
endloop.
No errors - Commit*
if l_errflag is initial.
call function 'BAPI_TRANSACTION_COMMIT'.
endif.
What could be problem ?
Pl help
Regards
NagarajanHi,
Go through this sample code
LOOP AT t_salesorder INTO wa_salesorder.
t_header-sales_org = wa_salesorder-vkorg.
t_header-distr_chan = wa_salesorder-vtweg.
t_header-division = wa_salesorder-spart.
t_header-doc_type = wa_salesorder-auart.
APPEND t_header.
t_headerx-sales_org = 'X'.
t_headerx-distr_chan = 'X'.
t_headerx-division = 'X'.
t_headerx-doc_type = 'X'.
APPEND t_headerx.
t_itemx-material = 'X'.
t_itemx-target_qty = 'X'.
APPEND t_itemx.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = wa_salesorder-kunnr
IMPORTING
output = wa_alpha-kunnr.
wa_partner-partn_role = 'AG'.
wa_partner-partn_numb = wa_alpha-kunnr.
APPEND wa_partner TO t_partner.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = wa_salesorder-kunnr1
IMPORTING
output = wa_alpha-kunnr1.
wa_partner-partn_role = 'WE'.
wa_partner-partn_numb = wa_alpha-kunnr1.
APPEND wa_partner TO t_partner.
wa_item-po_itm_no = wa_salesorder-bstnk.
wa_item-itm_number = wa_salesorder-posnr.
wa_item-material = wa_salesorder-matnr.
wa_item-target_qty = wa_salesorder-kwmeng.
APPEND wa_item TO t_item.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
order_header_in = t_header
order_header_inx = t_headerx
IMPORTING
salesdocument = gv_doc_no
TABLES
return = t_return
order_items_in = t_item[]
order_items_inx = t_itemx
order_partners = t_partner[].
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'
IMPORTING
return = t_return.
ENDLOOP.
Please paste only the portion of your code that gives you trouble. -
Reena Prabhakar - Sales order creation Using BAPI
Hi Reena,
This is Dinesh,i also face problem in Sales order creation using BAPI if you can send me the code it would be great help to me.
Regards,
DineshAnyhow, here is the code that I am using currently which works perfectly well. Not sure if it will be of any help to you, since the values to the BAPI come from the Webdynpro application. I have values stored in my "Test data directory" which I use for testing from the backend.
FUNCTION ztest.
Call the BAPI to create Sales Order
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
order_header_in = l_order_header
IMPORTING
salesdocument = l_salesdocument
TABLES
return = it_return
order_items_in = it_order_items
order_partners = it_order_partners
order_schedules_in = it_order_schdl
order_conditions_in = it_order_conditions
order_text = it_order_text.
READ TABLE it_return WITH KEY type = 'E'.
IF sy-subrc = 0.
*-- error occured
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
ELSE.
*-- no error
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
ENDFUNCTION. -
Error in : Purchase order Creation using BAPI_PO_CREATE1
Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
i_create_order,
i_cycle TYPE cycle,
i_qty_acpt TYPE dzmeng,
i_dly_date TYPE vbak-vdatu,
i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
i_vbap TYPE vbap,
i_ekko TYPE ekko,
i_ekpo TYPE ekpo,
i_bsoh TYPE bapisdhd1,
i_bsohx TYPE bapisdhd1x,
i_bpoh TYPE bapimepoheader,
i_bpohx TYPE bapimepoheaderx,
i_vbeln TYPE vbeln_va,
i_posnr TYPE posnr_va,
i_contr TYPE vbeln_va,
i_conit TYPE posnr_va,
i_ebeln TYPE ebeln,
i_ebelp TYPE ebelp,
i_pargr TYPE pargr,
i_thead TYPE thead,
i_line TYPE tline,
i_note TYPE txw_note,
i_new_vbeln TYPE vbeln_va,
i_new_ebeln TYPE ebeln,
i_wa_bsoi TYPE bapisditm,
i_wa_bsoix TYPE bapisditmx,
i_wa_bsop TYPE bapiparnr,
i_wa_bsos TYPE bapischdl,
i_wa_bsosx TYPE bapischdlx,
i_wa_vbpa TYPE vbpa,
i_wa_vbkd TYPE vbkd,
i_wa_bpoi TYPE bapimepoitem,
i_wa_bpoix TYPE bapimepoitemx,
i_wa_bpos TYPE bapimeposchedule,
i_wa_bposx TYPE bapimeposchedulx,
i_wa_bpop TYPE bapiekkop,
i_wa_ekpa TYPE ekpa,
i_message TYPE char72,
i_bapiretn TYPE bapiret2,
i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
c_char_e VALUE 'E',
c_char_p VALUE 'P',
c_char_g VALUE 'G',
c_char_i VALUE 'I',
c_char_s VALUE 'S',
c_char_x VALUE 'X',
c_zsw(3) VALUE 'ZSW',
c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
IF NOT i_create_order IS INITIAL .
CLEAR: i_create_order .
MOVE: wa_order_split_create-docnr TO i_ebeln,
wa_order_split_create-docitm TO i_ebelp .
CALL FUNCTION 'ME_EKKO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
IMPORTING
po_ekko = i_ekko
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
ENDIF .
* Fill PO Header
i_bpoh-comp_code = i_ekko-bukrs .
i_bpoh-doc_type = i_ekko-bsart .
i_bpoh-vendor = i_ekko-lifnr .
i_bpoh-langu = i_ekko-spras .
i_bpoh-pmnttrms = i_ekko-zterm .
i_bpoh-purch_org = i_ekko-ekorg .
i_bpoh-pur_group = i_ekko-ekgrp .
i_bpoh-currency = i_ekko-waers .
i_bpoh-agreement = i_ekko-konnr .
i_bpoh-incoterms1 = i_ekko-inco1 .
i_bpoh-incoterms2 = i_ekko-inco2 .
* Fill PO update indicator 'X'
i_bpohx-comp_code = c_char_x .
i_bpohx-doc_type = c_char_x .
i_bpohx-vendor = c_char_x .
i_bpohx-langu = c_char_x .
i_bpohx-pmnttrms = c_char_x .
i_bpohx-purch_org = c_char_x .
i_bpohx-pur_group = c_char_x .
i_bpohx-currency = c_char_x .
i_bpohx-agreement = c_char_x .
i_bpohx-incoterms1 = c_char_x .
i_bpohx-incoterms2 = c_char_x .
CALL FUNCTION 'ME_EKPO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
pi_ebelp = i_ebelp
IMPORTING
po_ekpo = i_ekpo
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF .
* Fill PO Item
i_wa_bpoi-po_item = i_ekpo-ebelp .
i_wa_bpoi-material = i_ekpo-matnr .
i_wa_bpoi-plant = i_ekpo-werks .
i_wa_bpoi-stge_loc = i_ekpo-lgort .
i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
i_wa_bpoi-po_unit = i_ekpo-meins .
i_wa_bpoi-tax_code = i_ekpo-mwskz .
i_wa_bpoi-val_type = i_ekpo-bwtar .
i_wa_bpoi-item_cat = i_ekpo-pstyp .
i_wa_bpoi-acctasscat = i_ekpo-knttp .
i_wa_bpoi-agreement = i_ekpo-konnr .
i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
APPEND i_wa_bpoi TO i_bpoi .
* Fill PO Item update indicator 'X'
i_wa_bpoix-po_item = i_ekpo-ebelp .
i_wa_bpoix-po_itemx = c_char_x .
i_wa_bpoix-material = c_char_x .
i_wa_bpoix-plant = c_char_x .
i_wa_bpoix-stge_loc = c_char_x .
i_wa_bpoix-quantity = c_char_x .
i_wa_bpoix-po_unit = c_char_x .
i_wa_bpoix-tax_code = c_char_x .
i_wa_bpoix-val_type = c_char_x .
i_wa_bpoix-item_cat = c_char_x .
i_wa_bpoix-acctasscat = c_char_x .
i_wa_bpoix-agreement = c_char_x .
i_wa_bpoix-agmt_item = c_char_x .
APPEND i_wa_bpoix TO i_bpoix .
* Fill PO Item Schedule
i_wa_bpos-po_item = i_ekpo-ebelp .
i_wa_bpos-sched_line = '0001' .
i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
APPEND i_wa_bpos TO i_bpos .
* Fill PO Item schedule update indicator 'X'
i_wa_bposx-po_item = i_ekpo-ebelp .
i_wa_bposx-sched_line = '0001' .
i_wa_bposx-delivery_date = c_char_x .
i_wa_bposx-quantity = c_char_x .
APPEND i_wa_bposx TO i_bposx .
CLEAR: i_pargr .
SELECT SINGLE pargr
INTO i_pargr
FROM t161
WHERE bstyp = i_ekko-bstyp
AND bsart = i_ekko-bsart .
CLEAR i_ekpa[].
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = i_ekpa[].
LOOP AT i_ekpa INTO i_wa_ekpa .
i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
i_wa_bpop-langu = sy-langu .
IF NOT i_wa_ekpa-lifn2 IS INITIAL .
i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
ELSE .
i_wa_bpop-buspartno = i_wa_ekpa-parnr .
ENDIF .
APPEND i_wa_bpop TO i_bpop .
CLEAR: i_wa_ekpa, i_wa_bpop .
ENDLOOP .
CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = i_bpoh
poheaderx = i_bpohx
IMPORTING
exppurchaseorder = i_new_ebeln
TABLES
return = i_bapiret2
poitem = i_bpoi[]
poitemx = i_bpoix[]
poschedule = i_bpos[]
poschedulex = i_bposx[].
i_order = i_new_ebeln .
SHIFT i_order LEFT DELETING LEADING '0' .
i_return-errortype = c_char_i .
i_return-workarea = c_zsw .
i_return-message = '064' .
i_return-variable1 = i_order .
loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
append i_bapiretn to t_bapi_return .
endloop .
if t_bapi_return[] is initial .
i_create_order = c_char_x .
CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
EXPORTING
act_return = i_return. "Popup with new PO no.
ENDCASE . " Docind
ENDIF .
ENDLOOP.Hi Shareen,
I think in the following parts of the code,
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = i_ekpa[].
Error in : Purchase order Creation using BAPI_PO_CREATE1
Posted: Mar 20, 2006 7:39 PM Reply E-mail this post
Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
i_create_order,
i_cycle TYPE cycle,
i_qty_acpt TYPE dzmeng,
i_dly_date TYPE vbak-vdatu,
i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
i_vbap TYPE vbap,
i_ekko TYPE ekko,
i_ekpo TYPE ekpo,
i_bsoh TYPE bapisdhd1,
i_bsohx TYPE bapisdhd1x,
i_bpoh TYPE bapimepoheader,
i_bpohx TYPE bapimepoheaderx,
i_vbeln TYPE vbeln_va,
i_posnr TYPE posnr_va,
i_contr TYPE vbeln_va,
i_conit TYPE posnr_va,
i_ebeln TYPE ebeln,
i_ebelp TYPE ebelp,
i_pargr TYPE pargr,
i_thead TYPE thead,
i_line TYPE tline,
i_note TYPE txw_note,
i_new_vbeln TYPE vbeln_va,
i_new_ebeln TYPE ebeln,
i_wa_bsoi TYPE bapisditm,
i_wa_bsoix TYPE bapisditmx,
i_wa_bsop TYPE bapiparnr,
i_wa_bsos TYPE bapischdl,
i_wa_bsosx TYPE bapischdlx,
i_wa_vbpa TYPE vbpa,
i_wa_vbkd TYPE vbkd,
i_wa_bpoi TYPE bapimepoitem,
i_wa_bpoix TYPE bapimepoitemx,
i_wa_bpos TYPE bapimeposchedule,
i_wa_bposx TYPE bapimeposchedulx,
i_wa_bpop TYPE bapiekkop,
i_wa_ekpa TYPE ekpa,
i_message TYPE char72,
i_bapiretn TYPE bapiret2,
i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
c_char_e VALUE 'E',
c_char_p VALUE 'P',
c_char_g VALUE 'G',
c_char_i VALUE 'I',
c_char_s VALUE 'S',
c_char_x VALUE 'X',
c_zsw(3) VALUE 'ZSW',
c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
IF NOT i_create_order IS INITIAL .
CLEAR: i_create_order .
MOVE: wa_order_split_create-docnr TO i_ebeln,
wa_order_split_create-docitm TO i_ebelp .
CALL FUNCTION 'ME_EKKO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
IMPORTING
po_ekko = i_ekko
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
ENDIF .
Fill PO Header
i_bpoh-comp_code = i_ekko-bukrs .
i_bpoh-doc_type = i_ekko-bsart .
i_bpoh-vendor = i_ekko-lifnr .
i_bpoh-langu = i_ekko-spras .
i_bpoh-pmnttrms = i_ekko-zterm .
i_bpoh-purch_org = i_ekko-ekorg .
i_bpoh-pur_group = i_ekko-ekgrp .
i_bpoh-currency = i_ekko-waers .
i_bpoh-agreement = i_ekko-konnr .
i_bpoh-incoterms1 = i_ekko-inco1 .
i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
i_bpohx-comp_code = c_char_x .
i_bpohx-doc_type = c_char_x .
i_bpohx-vendor = c_char_x .
i_bpohx-langu = c_char_x .
i_bpohx-pmnttrms = c_char_x .
i_bpohx-purch_org = c_char_x .
i_bpohx-pur_group = c_char_x .
i_bpohx-currency = c_char_x .
i_bpohx-agreement = c_char_x .
i_bpohx-incoterms1 = c_char_x .
i_bpohx-incoterms2 = c_char_x .
CALL FUNCTION 'ME_EKPO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
pi_ebelp = i_ebelp
IMPORTING
po_ekpo = i_ekpo
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF .
Fill PO Item
i_wa_bpoi-po_item = i_ekpo-ebelp .
i_wa_bpoi-material = i_ekpo-matnr .
i_wa_bpoi-plant = i_ekpo-werks .
i_wa_bpoi-stge_loc = i_ekpo-lgort .
i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
i_wa_bpoi-po_unit = i_ekpo-meins .
i_wa_bpoi-tax_code = i_ekpo-mwskz .
i_wa_bpoi-val_type = i_ekpo-bwtar .
i_wa_bpoi-item_cat = i_ekpo-pstyp .
i_wa_bpoi-acctasscat = i_ekpo-knttp .
i_wa_bpoi-agreement = i_ekpo-konnr .
i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
i_wa_bpoix-po_item = i_ekpo-ebelp .
i_wa_bpoix-po_itemx = c_char_x .
i_wa_bpoix-material = c_char_x .
i_wa_bpoix-plant = c_char_x .
i_wa_bpoix-stge_loc = c_char_x .
i_wa_bpoix-quantity = c_char_x .
i_wa_bpoix-po_unit = c_char_x .
i_wa_bpoix-tax_code = c_char_x .
i_wa_bpoix-val_type = c_char_x .
i_wa_bpoix-item_cat = c_char_x .
i_wa_bpoix-acctasscat = c_char_x .
i_wa_bpoix-agreement = c_char_x .
i_wa_bpoix-agmt_item = c_char_x .
APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
i_wa_bpos-po_item = i_ekpo-ebelp .
i_wa_bpos-sched_line = '0001' .
i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
i_wa_bposx-po_item = i_ekpo-ebelp .
i_wa_bposx-sched_line = '0001' .
i_wa_bposx-delivery_date = c_char_x .
i_wa_bposx-quantity = c_char_x .
APPEND i_wa_bposx TO i_bposx .
CLEAR: i_pargr .
SELECT SINGLE pargr
INTO i_pargr
FROM t161
WHERE bstyp = i_ekko-bstyp
AND bsart = i_ekko-bsart .
CLEAR i_ekpa[].
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = <b>i_ekpa[].</b>
LOOP AT i_ekpa INTO i_wa_ekpa .
i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
i_wa_bpop-langu = sy-langu .
IF NOT i_wa_ekpa-lifn2 IS INITIAL .
i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
ELSE .
i_wa_bpop-buspartno = i_wa_ekpa-parnr .
ENDIF .
APPEND i_wa_bpop TO i_bpop .
CLEAR: i_wa_ekpa, i_wa_bpop .
ENDLOOP .
CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = i_bpoh
poheaderx = i_bpohx
IMPORTING
exppurchaseorder = i_new_ebeln
TABLES
return = i_bapiret2
<b> poitem = i_bpoi[]
poitemx = i_bpoix[]
poschedule = i_bpos[]
poschedulex = i_bposx[].</b>
it should be only i_bpoi, i_bpoix, i_bpos, i_bposx but not i_bpoi[], i_bpoix[], i_bpos[], i_bposx[].
CHange the code as follows:
DATA: i_insert,
i_create_order,
i_cycle TYPE cycle,
i_qty_acpt TYPE dzmeng,
i_dly_date TYPE vbak-vdatu,
i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
i_vbap TYPE vbap,
i_ekko TYPE ekko,
i_ekpo TYPE ekpo,
i_bsoh TYPE bapisdhd1,
i_bsohx TYPE bapisdhd1x,
i_bpoh TYPE bapimepoheader,
i_bpohx TYPE bapimepoheaderx,
i_vbeln TYPE vbeln_va,
i_posnr TYPE posnr_va,
i_contr TYPE vbeln_va,
i_conit TYPE posnr_va,
i_ebeln TYPE ebeln,
i_ebelp TYPE ebelp,
i_pargr TYPE pargr,
i_thead TYPE thead,
i_line TYPE tline,
i_note TYPE txw_note,
i_new_vbeln TYPE vbeln_va,
i_new_ebeln TYPE ebeln,
i_wa_bsoi TYPE bapisditm,
i_wa_bsoix TYPE bapisditmx,
i_wa_bsop TYPE bapiparnr,
i_wa_bsos TYPE bapischdl,
i_wa_bsosx TYPE bapischdlx,
i_wa_vbpa TYPE vbpa,
i_wa_vbkd TYPE vbkd,
i_wa_bpoi TYPE bapimepoitem,
i_wa_bpoix TYPE bapimepoitemx,
i_wa_bpos TYPE bapimeposchedule,
i_wa_bposx TYPE bapimeposchedulx,
i_wa_bpop TYPE bapiekkop,
i_wa_ekpa TYPE ekpa,
i_message TYPE char72,
i_bapiretn TYPE bapiret2,
i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
c_char_e VALUE 'E',
c_char_p VALUE 'P',
c_char_g VALUE 'G',
c_char_i VALUE 'I',
c_char_s VALUE 'S',
c_char_x VALUE 'X',
c_zsw(3) VALUE 'ZSW',
c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
IF NOT i_create_order IS INITIAL .
CLEAR: i_create_order .
MOVE: wa_order_split_create-docnr TO i_ebeln,
wa_order_split_create-docitm TO i_ebelp .
CALL FUNCTION 'ME_EKKO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
IMPORTING
po_ekko = i_ekko
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
ENDIF .
Fill PO Header
i_bpoh-comp_code = i_ekko-bukrs .
i_bpoh-doc_type = i_ekko-bsart .
i_bpoh-vendor = i_ekko-lifnr .
i_bpoh-langu = i_ekko-spras .
i_bpoh-pmnttrms = i_ekko-zterm .
i_bpoh-purch_org = i_ekko-ekorg .
i_bpoh-pur_group = i_ekko-ekgrp .
i_bpoh-currency = i_ekko-waers .
i_bpoh-agreement = i_ekko-konnr .
i_bpoh-incoterms1 = i_ekko-inco1 .
i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
i_bpohx-comp_code = c_char_x .
i_bpohx-doc_type = c_char_x .
i_bpohx-vendor = c_char_x .
i_bpohx-langu = c_char_x .
i_bpohx-pmnttrms = c_char_x .
i_bpohx-purch_org = c_char_x .
i_bpohx-pur_group = c_char_x .
i_bpohx-currency = c_char_x .
i_bpohx-agreement = c_char_x .
i_bpohx-incoterms1 = c_char_x .
i_bpohx-incoterms2 = c_char_x .
CALL FUNCTION 'ME_EKPO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
pi_ebelp = i_ebelp
IMPORTING
po_ekpo = i_ekpo
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF .
Fill PO Item
i_wa_bpoi-po_item = i_ekpo-ebelp .
i_wa_bpoi-material = i_ekpo-matnr .
i_wa_bpoi-plant = i_ekpo-werks .
i_wa_bpoi-stge_loc = i_ekpo-lgort .
i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
i_wa_bpoi-po_unit = i_ekpo-meins .
i_wa_bpoi-tax_code = i_ekpo-mwskz .
i_wa_bpoi-val_type = i_ekpo-bwtar .
i_wa_bpoi-item_cat = i_ekpo-pstyp .
i_wa_bpoi-acctasscat = i_ekpo-knttp .
i_wa_bpoi-agreement = i_ekpo-konnr .
i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
i_wa_bpoix-po_item = i_ekpo-ebelp .
i_wa_bpoix-po_itemx = c_char_x .
i_wa_bpoix-material = c_char_x .
i_wa_bpoix-plant = c_char_x .
i_wa_bpoix-stge_loc = c_char_x .
i_wa_bpoix-quantity = c_char_x .
i_wa_bpoix-po_unit = c_char_x .
i_wa_bpoix-tax_code = c_char_x .
i_wa_bpoix-val_type = c_char_x .
i_wa_bpoix-item_cat = c_char_x .
i_wa_bpoix-acctasscat = c_char_x .
i_wa_bpoix-agreement = c_char_x .
i_wa_bpoix-agmt_item = c_char_x .
APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
i_wa_bpos-po_item = i_ekpo-ebelp .
i_wa_bpos-sched_line = '0001' .
i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
i_wa_bposx-po_item = i_ekpo-ebelp .
i_wa_bposx-sched_line = '0001' .
i_wa_bposx-delivery_date = c_char_x .
i_wa_bposx-quantity = c_char_x .
APPEND i_wa_bposx TO i_bposx .
CLEAR: i_pargr .
SELECT SINGLE pargr
INTO i_pargr
FROM t161
WHERE bstyp = i_ekko-bstyp
AND bsart = i_ekko-bsart .
CLEAR i_ekpa[].
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = i_ekpa.
LOOP AT i_ekpa INTO i_wa_ekpa .
i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
i_wa_bpop-langu = sy-langu .
IF NOT i_wa_ekpa-lifn2 IS INITIAL .
i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
ELSE .
i_wa_bpop-buspartno = i_wa_ekpa-parnr .
ENDIF .
APPEND i_wa_bpop TO i_bpop .
CLEAR: i_wa_ekpa, i_wa_bpop .
ENDLOOP .
CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = i_bpoh
poheaderx = i_bpohx
IMPORTING
exppurchaseorder = i_new_ebeln
TABLES
return = i_bapiret2
poitem = i_bpoi
poitemx = i_bpoix
poschedule = i_bpos
poschedulex = i_bposx.
i_order = i_new_ebeln .
SHIFT i_order LEFT DELETING LEADING '0' .
i_return-errortype = c_char_i .
i_return-workarea = c_zsw .
i_return-message = '064' .
i_return-variable1 = i_order .
loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
append i_bapiretn to t_bapi_return .
endloop .
if t_bapi_return[] is initial .
i_create_order = c_char_x .
CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
EXPORTING
act_return = i_return. "Popup with new PO no.
ENDCASE . " Docind
ENDIF .
ENDLOOP. -
Need sales order creation using bapi in oops
need code for sales order creation using bapi in oops
hi rocky,
could you pls give a bit explanation on what you are expecting.
regards,
Pavan -
Mass sales order creation using BAPI
Dear All,
Can anyone help in mass sales order creation using Bapi BAPI_SALESORDER_CREATEFROMDAT2.
For example if i want to create 3 sales order with three item per order . i am populating
HEADER = 3 Records
Item = 9 records
schedule = 9 records
partner = 1 record.
Then after populating the records I am calling Bapi BAPI_SALESORDER_CREATEFROMDAT2
to create order. It should have created three order but unfortunately it creates
only one sales order. I debugged and found that records are correct both in header,
item, scheudle and partners.
Could you please guide me what I am missing for creation of mass orders.
I appreciate your time and many thanks in advance.
cheers
chandraHi Chandra,
Do like this.
Loop at Header table into wa_header.
*-- Move BAPI Header data
Loop at item table into wa_item where condition.
*-- in this move all Item and Schedule line item to the BAPI.
At end of item .
Use the below function modules.
BAPI_SALESORDER_CREATEFROMDAT2
BAPI_TRANSACTION_COMMIT.
Endloop.
Endloop.
Regards,
Balavardhan.K -
Sales order creation using webdynpro in ABAP
Plz give the process how to create sales order creation using webdynpro in ABAP. if not possible plz let me know how to create in JAVA.
It is very urgent. I hope i will get it very soon.
Thanks all
SaiIn your WDA application, all you need to do is call the BAPI BAPI_SALESORDER_CREATEFROMDAT2 when the user clicks some button. Most likely, you can put the code for this BAPI call in the onAction method for your button.
Regards,
Rich Heilman -
SALES order creation using BAPI's
Hai to all,
I want to create sales order using bapis .I am new to this topic could any body guide me how to create sales order step by step process using bapis.
Thanks in advance.
Regards,
Chaitanya**　プログラムＩＤ　　　　　　 ： ZBAPI_SALESORDER_CREATE *
**　プログラム名称　　 　　 ： Upload Sales Order Creation *
**　処理概要　　　　　　　 　： *
**　作成者　　　　　　　　　　 ： Karthik.P *
**　作成日　　　　　　　　　　 ： 2006/08/10 *
REPORT ZBAPI_SALESORDER_CREATE LINE-SIZE 132 MESSAGE-ID ZMMBAPI .
Internal table definition *
****<<<<<Communication Fields: Sales and Distribution Document Header>>>>>>>>
DATA: GT_ORDER_HEADER_IN LIKE BAPISDHD1,
*******<<<Checkbox Fields for Sales and Distribution Document Header>>>>>>>>>
GT_ORDER_HEADER_INX LIKE BAPISDHD1X,
*****<<<<<Return Parameter>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
GT_RETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE, " Return Messages
*********<<<Communication Fields: Sales and Distribution Document Item<>>>>>
GT_ORDER_ITEMS_IN LIKE BAPISDITM OCCURS 0 WITH HEADER LINE, " Item Data
*********<<<Communication Fields: Sales and Distribution Document Item>>>>>>>
GT_ORDER_ITEMS_INX LIKE BAPISDITMX OCCURS 0 WITH HEADER LINE, "Item Data Checkbox
*********<<<Communication Fields: Sales and Distribution Document Item>>>>>>>
GT_SALESDOCUMENT LIKE BAPIVBELN-VBELN , "Number of Generated Document
*********<<<Communications Fields: SD Document Partner: WWW>>>>>>>>>>>>>>>>>>
GT_ORDER_PARTNERS LIKE BAPIPARNR OCCURS 0 WITH HEADER LINE, "Document Partner
********<<<<Communications Fields: SD Document Partner: WWW>>>>>>>>>>>>>>>>>>
GT_ORDER_SCHEDULES_IN LIKE BAPISCHDL OCCURS 0 WITH HEADER LINE, "Schedule Line Data
****<<<<<<<<Checkbox List for Maintaining Sales Document Schedule Line>>>>>>>>
GT_ORDER_SCHEDULES_INX LIKE BAPISCHDLX OCCURS 0 WITH HEADER LINE, " Checkbox Schedule Line Data
*******Communication Fields for Maintaining Conditions in the Order
GT_ORDER_CONDITIONS_IN LIKE BAPICOND OCCURS 0 WITH HEADER LINE,
******Communication Fields for Maintaining Conditions in the Order
GT_ORDER_CONDITIONS_INX LIKE BAPICONDX OCCURS 0 WITH HEADER LINE.
Data definition *
DATA: BEGIN OF GT_FT_SALES OCCURS 0,
DOC_TYPE(4) , "Sales Document Type
SALES_ORG(4) , "Sales Organization
DISTR_CHAN(2) , "Distribution Channel
DIVISION(2) , "DIVISION(2)
SALES_DIST(6) , "Sales district
INCOTERMS1(3) , "Incoterms (part 1)
INCOTERMS2(28) , "Incoterms (part 2)
PMNTTRMS(4) , "Terms of payment key
PRICE_DATE(8) , "Date for pricing and exchange rate
PURCH_NO_C(35) , "Customer purchase order number
PURCH_NO_S(35) , "Ship-to Party's Purchase Order Number
EXCHG_RATE(8) , "Directly quoted exchange rate for pricing and statistics
CURRENCY(5) , "SD document currency
MATERIAL(18), "MATERIAL
TARGET_QTY(13) , "Target quantity in sales units
ITEM_CATEG(4) , "Sales document item category
MATL_GROUP(8) , "Material Group
PURCH_NO_C1(35), "Customer purchase order number
SALES_DIST1(6) , "Sales district
INCOTERMS11(3) , "Incoterms (part 1)
INCOTERMS21(28), "Incoterms (part 2)
PMNTTRMS1(4) , "Terms of payment key
EXCHG_RATE1(8) , "Directly quoted exchange rate for pricing and statistics
PRICE_DATE1(8) , "Date for pricing and exchange rate
TRG_QTY_NO(5) , "Factor for converting sales units to base units (target qty)
DIVISION1(2) , "DIVISION1
SALQTYNUM(5) , "Numerator (factor) for conversion of sales quantity into SKU
GROSS_WGHT(3) , "Gross Weight of the Item
NET_WEIGHT(15) , "Net Weight of the Item
UNTOF_WGHT(3) ,"Weight Unit
PARTN_ROLE(2) ,"Partner function
PARTN_NUMB(10) ,"Customer Number 1
********<<<<Communications Fields: SD Document Partner: WWW>>>>>>>>>>>>>>>>>>
ITM_NUMBER(6) ,"Item number of the SD document
REQ_QTY(8) , "Schedule line date
DLV_DATE(8) , "Schedule line date
MS_DATE(8) , "Material availability date
LOAD_DATE(8) , "Loading time (local time with reference to a shipping point)
GI_DATE(8), "Time of goods issue (local DATE, with reference to a plant)
TP_DATE(8) , "Transportation planning -time (local w/ref. to shipping pnt)
ITM_NUMBER2(6) , "Condition item number
END OF GT_FT_SALES,
MSG(240) TYPE C, " Return Message
E_REC(8) TYPE C, " Error Records Counter
REC_NO(8) TYPE C, " Records Number Indicator
S_REC(8) TYPE C, " Successful Records Counter
T_REC(8) TYPE C. " Total Records Counter
selection block for EXCEL UPLOAD FILE>>>>>>>>>>>>>>>>>>>>>>>>
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
PARAMETERS FILE TYPE IBIPPARMS-PATH OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
*<<<<AT SELECTION-SCREEN ON VALUE-REQUEST FOR FILE .>>>>>>>>>>>>
AT SELECTION-SCREEN ON VALUE-REQUEST FOR FILE .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
IMPORTING
FILE_NAME = FILE.
**<<<<<<<<<<<<<<<<<START-OF-SELECTION.>>>>>>>>>>>>>>>>>>>>>>>>>>>
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD' "#EC *
EXPORTING
FILENAME = FILE
FILETYPE = 'DAT'
TABLES
DATA_TAB = GT_FT_SALES
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11.
IF SY-SUBRC <> 0 .
MESSAGE E000.
ENDIF.
SKIP 3.
FORMAT COLOR COL_HEADING INVERSE ON.
WRITE 40 TEXT-001.
FORMAT COLOR COL_HEADING INVERSE OFF.
SKIP 1.
FORMAT COLOR COL_NEGATIVE INVERSE ON.
WRITE :/ TEXT-002, 13 SY-MANDT , 104 TEXT-003, 111 SY-UNAME,
/ TEXT-004, 13 SY-DATUM , 104 TEXT-005, 111 SY-UZEIT.
FORMAT COLOR COL_NEGATIVE INVERSE OFF.
SKIP 3.
LOOP AT GT_FT_SALES.
PERFORM SLALE_UPLOAD_DATA.
ENDLOOP.
T_REC = E_REC + S_REC.
SKIP 3.
FORMAT COLOR COL_TOTAL INVERSE ON.
WRITE: /38 TEXT-007, T_REC.
FORMAT COLOR COL_TOTAL INVERSE OFF.
FORMAT COLOR COL_NEGATIVE INVERSE ON.
WRITE: /38 TEXT-008, E_REC.
FORMAT COLOR COL_NEGATIVE INVERSE OFF.
FORMAT COLOR COL_TOTAL INVERSE ON.
WRITE: /38 TEXT-009, S_REC.
FORMAT COLOR COL_TOTAL INVERSE OFF.
*& Form SLALE_UPLOAD_DATA
text
--> p1 text
<-- p2 text
FORM SLALE_UPLOAD_DATA .
*******<<<<<<<<<<Communication Fields: Sales and Distribution Document Header>>>>>>
GT_ORDER_HEADER_IN-DOC_TYPE = 'TA'.
GT_ORDER_HEADER_IN-SALES_ORG = GT_FT_SALES-SALES_ORG . "'0001'
GT_ORDER_HEADER_IN-DISTR_CHAN = GT_FT_SALES-DISTR_CHAN. "'01'
GT_ORDER_HEADER_IN-DIVISION = GT_FT_SALES-DIVISION. " '01'
GT_ORDER_HEADER_IN-SALES_DIST = GT_FT_SALES-SALES_DIST ."'000001'
GT_ORDER_HEADER_IN-INCOTERMS1 = GT_FT_SALES-INCOTERMS1. "'CFR'
GT_ORDER_HEADER_IN-INCOTERMS2 = GT_FT_SALES-INCOTERMS2 . "'HAMBURG'
GT_ORDER_HEADER_IN-PMNTTRMS = GT_FT_SALES-PMNTTRMS . "'0001'
GT_ORDER_HEADER_IN-PRICE_DATE = GT_FT_SALES-PRICE_DATE ."'20060818'
GT_ORDER_HEADER_IN-PURCH_NO_C = '32'.
GT_ORDER_HEADER_IN-PURCH_NO_S = '32'.
GT_ORDER_HEADER_IN-EXCHG_RATE = GT_FT_SALES-EXCHG_RATE ."'1.00000'
GT_ORDER_HEADER_IN-CURRENCY = GT_FT_SALES-CURRENCY . " 'EUR'
********<<<Checkbox Fields for Sales and Distribution Document Header>>>>>>>>>
GT_ORDER_HEADER_INX-DOC_TYPE = 'X'.
GT_ORDER_HEADER_INX-SALES_ORG = 'X'.
GT_ORDER_HEADER_INX-DISTR_CHAN = 'X'.
GT_ORDER_HEADER_INX-DIVISION = 'X'.
GT_ORDER_HEADER_INX-SALES_DIST = 'X'.
GT_ORDER_HEADER_INX-INCOTERMS1 = 'X'.
GT_ORDER_HEADER_INX-INCOTERMS2 = 'X'.
GT_ORDER_HEADER_INX-PMNTTRMS = 'X'.
GT_ORDER_HEADER_INX-PRICE_DATE = 'X'.
GT_ORDER_HEADER_INX-PURCH_NO_C = 'X'.
GT_ORDER_HEADER_INX-PURCH_NO_S = 'X'.
GT_ORDER_HEADER_INX-EXCHG_RATE = 'X'.
GT_ORDER_HEADER_INX-CURRENCY = 'X'.
*****<<<<<<Communication Fields: Sales and Distribution Document Item>>>
GT_ORDER_ITEMS_IN-ITM_NUMBER = '000010'.
GT_ORDER_ITEMS_IN-MATERIAL = GT_FT_SALES-MATERIAL .
GT_ORDER_ITEMS_IN-PO_ITM_NO = '32'.
GT_ORDER_ITEMS_IN-CUST_MAT22 = 'AGNI-IV'.
GT_ORDER_ITEMS_IN-BILL_DATE = '20060808'.
GT_ORDER_ITEMS_IN-PLANT = '0001'.
*GT_ORDER_ITEMS_IN-STORE_LOC = '0001'.
GT_ORDER_ITEMS_IN-TARGET_QTY = GT_FT_SALES-TARGET_QTY . "'1000'
GT_ORDER_ITEMS_IN-ITEM_CATEG = GT_FT_SALES-ITEM_CATEG . "'TAN'
GT_ORDER_ITEMS_IN-MATL_GROUP = GT_FT_SALES-MATL_GROUP . "'01'
GT_ORDER_ITEMS_IN-PURCH_NO_C = GT_FT_SALES-PURCH_NO_C . "'32'
GT_ORDER_ITEMS_IN-SALES_DIST = GT_FT_SALES-SALES_DIST . "'000001'
GT_ORDER_ITEMS_IN-INCOTERMS1 = GT_FT_SALES-INCOTERMS1 . "'CFR'
GT_ORDER_ITEMS_IN-INCOTERMS2 = GT_FT_SALES-INCOTERMS2 . "'HAMBURG'
GT_ORDER_ITEMS_IN-PMNTTRMS = GT_FT_SALES-PMNTTRMS . "'0001'.
GT_ORDER_ITEMS_IN-EXCHG_RATE = GT_FT_SALES-EXCHG_RATE . "'1.00000'
GT_ORDER_ITEMS_IN-PRICE_DATE = GT_FT_SALES-PRICE_DATE . "'20060808'
*GT_ORDER_ITEMS_IN-SALES_UNIT = 'DZ'.
GT_ORDER_ITEMS_IN-TRG_QTY_NO = GT_FT_SALES-TRG_QTY_NO . "'23'
GT_ORDER_ITEMS_IN-DIVISION = GT_FT_SALES-DIVISION . "'01'
GT_ORDER_ITEMS_IN-SALQTYNUM = GT_FT_SALES-SALQTYNUM . "'32'
GT_ORDER_ITEMS_IN-GROSS_WGHT = GT_FT_SALES-GROSS_WGHT. " ' 25272000'
GT_ORDER_ITEMS_IN-NET_WEIGHT = GT_FT_SALES-NET_WEIGHT. "'24464000'
GT_ORDER_ITEMS_IN-UNTOF_WGHT = GT_FT_SALES-UNTOF_WGHT . " 'KG'
*GT_ORDER_ITEMS_IN-CURRENCY = 'EUR'.
APPEND GT_ORDER_ITEMS_IN.
****<<<<<<Communication Fields: Sales and Distribution Document Item>>>
GT_ORDER_ITEMS_INX-ITM_NUMBER = '000010'.
GT_ORDER_ITEMS_INX-MATERIAL = 'X'.
*GT_ORDER_ITEMS_INX-PO_ITM_NO = 'X'.
GT_ORDER_ITEMS_INX-CUST_MAT22 = 'X'.
GT_ORDER_ITEMS_INX-BILL_DATE = 'X'.
GT_ORDER_ITEMS_INX-PLANT = 'X'.
*GT_ORDER_ITEMS_INX-STORE_LOC = 'X'.
GT_ORDER_ITEMS_INX-TARGET_QTY = 'X'.
GT_ORDER_ITEMS_INX-ITEM_CATEG = 'X'.
GT_ORDER_ITEMS_INX-MATL_GROUP = 'X'.
GT_ORDER_ITEMS_INX-PURCH_NO_C = 'X'.
GT_ORDER_ITEMS_INX-SALES_DIST = 'X'.
GT_ORDER_ITEMS_INX-INCOTERMS1 = 'X'.
GT_ORDER_ITEMS_INX-INCOTERMS2 = 'X'.
GT_ORDER_ITEMS_INX-PMNTTRMS = 'X'.
GT_ORDER_ITEMS_INX-EXCHG_RATE = 'X'.
GT_ORDER_ITEMS_INX-PRICE_DATE = 'X'.
*GT_ORDER_ITEMS_INX-SALES_UNIT = 'X'.
GT_ORDER_ITEMS_INX-TRG_QTY_NO = 'X'.
GT_ORDER_ITEMS_INX-DIVISION = 'X'.
GT_ORDER_ITEMS_INX-SALQTYNUM = 'X'.
GT_ORDER_ITEMS_INX-GROSS_WGHT = 'X'.
GT_ORDER_ITEMS_INX-NET_WEIGHT = 'X'.
GT_ORDER_ITEMS_INX-UNTOF_WGHT = 'X'.
*GT_ORDER_ITEMS_IN-CURRENCY = 'x'.
APPEND GT_ORDER_ITEMS_INX.
*****<<<<<<Communications Fields: SD Document Partner: WWW
GT_ORDER_PARTNERS-PARTN_ROLE = 'WE'.
GT_ORDER_PARTNERS-PARTN_NUMB = '0000000057'.
***GT_ORDER_PARTNERS-ITM_NUMBER = GT_FT_SALES-ITM_NUMBER . " '000010'.
APPEND GT_ORDER_PARTNERS.
*********<<<<Communications Fields: SD Document Partner: WWW>>>>>>>>>>>>>>>>>>
GT_ORDER_SCHEDULES_IN-ITM_NUMBER = GT_FT_SALES-ITM_NUMBER." '000010'
GT_ORDER_SCHEDULES_IN-REQ_QTY = GT_FT_SALES-REQ_QTY . "'234'
GT_ORDER_SCHEDULES_IN-DLV_DATE = GT_FT_SALES-DLV_DATE ." '20060824'.
GT_ORDER_SCHEDULES_IN-MS_DATE = GT_FT_SALES-MS_DATE . "'20060808'
GT_ORDER_SCHEDULES_IN-LOAD_DATE = GT_FT_SALES-LOAD_DATE. " '20060822'
GT_ORDER_SCHEDULES_IN-GI_DATE = GT_FT_SALES-GI_DATE . " '20060823'
GT_ORDER_SCHEDULES_IN-TP_DATE = GT_FT_SALES-TP_DATE . "'20060821'
APPEND gt_ORDER_SCHEDULES_IN.
*********<<<<Communications Fields: SD Document Partner: WWW FLAG>>>>>>>>>>>>>>>>>>
GT_ORDER_SCHEDULES_INX-ITM_NUMBER = '000010'.
GT_ORDER_SCHEDULES_INX-REQ_QTY = 'X'.
GT_ORDER_SCHEDULES_INX-DLV_DATE = 'X'.
GT_ORDER_SCHEDULES_INX-MS_DATE = 'X'.
GT_ORDER_SCHEDULES_INX-LOAD_DATE = 'X'.
GT_ORDER_SCHEDULES_INX-GI_DATE = 'X'.
GT_ORDER_SCHEDULES_INX-DLV_DATE = 'X'.
APPEND gt_ORDER_SCHEDULES_INX.
********Communication Fields for Maintaining Conditions in the Order
GT_ORDER_CONDITIONS_IN-ITM_NUMBER = GT_FT_SALES-ITM_NUMBER ." '000010'
APPEND GT_ORDER_CONDITIONS_IN.
***Communication Fields for Maintaining Conditions in the Order
GT_ORDER_CONDITIONS_INX-ITM_NUMBER = '000010'.
APPEND GT_ORDER_CONDITIONS_INX.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
SALESDOCUMENTIN =
ORDER_HEADER_IN = GT_ORDER_HEADER_IN
ORDER_HEADER_INX = GT_ORDER_HEADER_INX
SENDER =
BINARY_RELATIONSHIPTYPE =
INT_NUMBER_ASSIGNMENT =
BEHAVE_WHEN_ERROR =
LOGIC_SWITCH =
TESTRUN =
CONVERT = ' '
IMPORTING
SALESDOCUMENT = GT_SALESDOCUMENT
TABLES
RETURN = GT_RETURN
ORDER_ITEMS_IN = GT_ORDER_ITEMS_IN
ORDER_ITEMS_INX = GT_ORDER_ITEMS_INX
ORDER_PARTNERS = GT_ORDER_PARTNERS
ORDER_SCHEDULES_IN = GT_ORDER_SCHEDULES_IN
ORDER_SCHEDULES_INX = GT_ORDER_SCHEDULES_INX
ORDER_CONDITIONS_IN = GT_ORDER_CONDITIONS_IN
ORDER_CONDITIONS_INX = GT_ORDER_CONDITIONS_INX
ORDER_CFGS_REF =
ORDER_CFGS_INST =
ORDER_CFGS_PART_OF =
ORDER_CFGS_VALUE =
ORDER_CFGS_BLOB =
ORDER_CFGS_VK =
ORDER_CFGS_REFINST =
ORDER_CCARD =
ORDER_TEXT =
ORDER_KEYS =
EXTENSIONIN =
PARTNERADDRESSES =
IF GT_RETURN-TYPE EQ 'E' .
E_REC = E_REC + 1.
READ TABLE GT_RETURN WITH KEY ID = 'V1'.
FORMAT COLOR COL_NEGATIVE INVERSE ON.
REC_NO = E_REC + S_REC.
CONCATENATE TEXT-006 REC_NO ':'
GT_RETURN-MESSAGE INTO MSG SEPARATED BY SPACE .
CONDENSE MSG.
WRITE: / MSG.
FORMAT COLOR COL_NEGATIVE INVERSE OFF.
ELSEIF GT_RETURN-TYPE EQ 'S'.
S_REC = S_REC + 1.
FORMAT COLOR COL_POSITIVE INVERSE ON.
MSG = GT_RETURN-MESSAGE.
CONDENSE MSG.
WRITE: / MSG .
FORMAT COLOR COL_POSITIVE INVERSE OFF.
PERFORM COMMIT_MM.
ENDIF.
CLEAR: GT_RETURN[], MSG.
ENDFORM. " SLALE_UPLOAD_DATA
*& Form COMMIT_MM
text
--> p1 text
<-- p2 text
FORM COMMIT_MM .
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN = GT_RETURN.
clear: GT_ORDER_ITEMS_IN[],GT_ORDER_CONDITIONS_IN[].
ENDFORM. " COMMIT_MM -
Multiple Input nodes to Sales Order creation using VC
hi experts,
i'm using BAPI_SALESORDER_CREATEFROMDAT1 for sales order creation in VC. i would like to get header details in a form and also like to get the multiple items details in a table and partner details in atable.i've to take both contents to create a sales order. when i click the submit button in the form " sold-to party is not defined" error message displayed and when i click the submit in table "DOC TYPE is not mentioned" message is shown. but i've given both details.
can you help me to solve my problem and i've confused which field is used to mention the sold-to party in the header_in.
thanks and regards
basheerHi,
I was facing the same problem while creating the sales order. Try giving following values:
If you are creating standard order, then enter 'TA' instead of 'OR' to the Doc_Type and enter 'AG' as a partner role instead of 'SP'.
It works for me. I don't know how??? Lets try.
Also try following links.
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/problems-working-with-bapi_salesorder_createfromdat2-527937#
http://www.saptechies.com/bapi_salesorder_createfromdat2/
Thanks,
Prashant
(PS. Do Rewards Points for useful answers) -
LSMW Sales Order creation using Bapi method
Hi folks ,
iam doing Lsmw bapimethod ,sales order creation .In the step start idoc processing iam getting error "Has Not been Accepted for Processing ",why iam not getting plz let me know points will be awarded for all answers .Hi,
You need to set the IDOC settings in the initial LSMW screen. It will be there in menu path.
Award points if helpful
Regards,
RamaKrishna C -
Multiple Inputs to Sales Order creation using VC
hi experts,
i've created sales order creation application using VC and i would like to give the header details in a input form and item details in a table for multiple entries. how can i combine these two inputs to create sales order. now i got two submit buttons one in form and one in table. how can i make it as a common submit button.
please give solutions to solve my problem.
Thanks and regards
basheerHi,
I saw your Bapi,but which is the Output port you are using to get the Out put data :salesorder.
To submit all the input UI elements at a Time follow the below steps.
Steps:
1.click on the connecting line b/w the tables and the data service .
2.click on the configure
3.now In the event name Dropdown ,put star * Sysmbol before the submit button ,Like : *submit
do the above step for another tabel also.
now in Runtime ,clicking on the Submit button in the Formview will trigger the other tabel inputs also.
I hope now you got ,
Govindu -
Sales order creation using LSMW
Hi All,
I am creating open sales order (VA01) using LSMW where I am using BAPI: BUS2032 and Method CREATEFROMDAT2.
I need to pass multiple line items for the same Header data, but the LSMW is creating multiple sales orders with a single line item every time.
I tried giving "on_change_transfer_record" after Header record but that doesn't work.
Can anyone suggest any suitable solution for this using BAPI only other than BDC, report program etc.
Thanks in Advance
Asif Ali KhanHi Asif Khan,
Please check this link
BAPI_SALESORDER_CREATEFROMDAT2 - Sales Order Create
http://sap-img.com/abap/bapi-salesorder-createfromdat2.htm
Best regards,
raam -
Error Eandling in Sales Order creation Using BAPI
Hi all,
i am using bapi_salesorder_createfromdat2.
i am having flat file like 1 header and 3 line items like
<---header> <-item-->
doc_num doc_type........item material
1 TA 10 100-500
1 TA 20 100-501
1 TA 30 100-502
2 TA 10 100-500
2 TA 20 100-502
i want to display only one message either creted or not created a sales document in a flat file.
i have created and internal with structure flat file and one extra field for Status.
help me out please.One of the tables parameter is 'RETURN'.
So
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT'
importing
exporting
tables
return = t_return.
read table t_return with key type = 'E'.
if sy-subrc eq 0.
write: 'Sales order was not created'.
else.
write: 'Sales document created'.
endif.
Message was edited by: Sharath kumar R -
Getting dump error in Sales order creation mode while going to item texts
Hi,
I'm getting an ABAP dump error while going to item text tab in the creation mode of a sales order. This issue is happening only when we make a manual entry in the item text field for a particular text type Y011 in the preceding document of the sales order. Otherwise everything is working fine.
When I checked the settings in SPRO under SD - Text Control - Sales Doc - Item, the definition and assignment for the TEXT type Y011 is maintained correctly. Not sure why the issue is happening only with this text type.
Please assist. Thank you
TaiseerThank you for the reply.
We had tried this already. However, since the error is with standard program with many function modules. They are finding it difficult.
There is strange side also for this error that I missed to update. When I replace the Text Id Y011 with a new one it is taking me to the line item text tab with out any error even though I'm using the same access sequence and other settings. However, after saving the order and displaying the order number, immediately it is going to dump again.
Maybe you are looking for
-
Hi Gurus, i have to copy my all data(all modules master data) from client 300 to 900 within the system. i have created a client 900 thru scc4, then logged in 900 with user sap* and passwd "pass".then sccl while scheduling this in background...i am ge
-
.pdf with Word hyperlinks opens in internet browser, or not at all
I'm using Adobe Acrobat X and Word 2010. When I create a .pdf from the Word application, all the hyperlinks work fine, EXCEPT that they open in the default internet browser instead of Reader. If I create the .pdf through Acrobat the links don't work
-
Error when trying to run my first Java app
Okay, Im new to Java programming. I started a day ago :). My question is after I compile my application like so. javac TestGreeting.javaIt give me a .class file. So the next step is I want to run it so I do the following. java TestGreeting.classWhen
-
SmartForms: How to loop inside smartforms?
Hi All, I have the following scenario below: kindly check the screenshot of my smartForm first: http://img10.imageshack.us/img10/9456/sflayout6cells.jpg In the screenshot, in the right side is the screenshot of my SAP output, while on the left is the
-
Flash swf file with web link only opens my safari home page not the link
I have a flash swf file with a simple web link. when i load the swf file and click the link it opens safari then loads up my homepage. It does not go to the link i clicked. if i choose internet explorer as my browser the swf file works fine. I am run