Error in Starting Dispatcher

When i start my Dispatcher i am getting the following error and it is in Yellow colour. Pls help me in this
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        BW7
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    75
intno      20050900
make:      multithreaded, Unicode, optimized
pid        5144
Mon Apr 23 13:25:45 2007
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 5144) [dpxxdisp.c   1237]
     shared lib "dw_xml.dll" version 75 successfully loaded
     shared lib "dw_xtc.dll" version 75 successfully loaded
     shared lib "dw_stl.dll" version 75 successfully loaded
     shared lib "dw_gui.dll" version 75 successfully loaded
     shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence :  -> 0,5,-1
use internal message server connection to port 3901
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >blrkecesbibw_BW7_01                     <
DpShMCreate: sizeof(wp_adm)          22528     (1408)
DpShMCreate: sizeof(tm_adm)          3994272     (19872)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1440)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 07080040, size: 4657592)
DpShMCreate: allocated sys_adm at 07080040
DpShMCreate: allocated wp_adm at 07081E40
DpShMCreate: allocated tm_adm_list at 07087640
DpShMCreate: allocated tm_adm at 07087670
DpShMCreate: allocated wp_ca_adm at 07456910
DpShMCreate: allocated appc_ca_adm at 0745C6D0
DpShMCreate: allocated comm_adm at 0745E610
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 074DF4D0
DpShMCreate: allocated gw_adm at 074DF510
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 074DF540
DpShMCreate: allocated wall_adm at 074DF548
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 2047 blocks reserved for free list.
ES initialized.
J2EE server info
  start = TRUE
  state = STARTED
  pid = 8188
  argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
  argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
  argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
  argv[3] = -DSAPSTART=1
  argv[4] = -DCONNECT_PORT=1629
  argv[5] = -DSAPSYSTEM=01
  argv[6] = -DSAPSYSTEMNAME=BW7
  argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
  argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
  argv[9] = -DFRFC_FALLBACK=ON
  argv[10] = -DFRFC_FALLBACK_HOST=localhost
  start_lazy = 0
  start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1623]
***LOG Q0K=> DpMsAttach, mscon ( blrkecesbibw) [dpxxdisp.c   11586]
DpStartStopMsg: send start message (myname is >blrkecesbibw_BW7_01                     <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Mon Apr 23 13:25:48 2007
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Mon Apr 23 13:26:25 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:26:45 2007
J2EE server info
  start = TRUE
  state = STARTED
  pid = 3764
  argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
  argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
  argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
  argv[3] = -DSAPSTART=1
  argv[4] = -DCONNECT_PORT=1713
  argv[5] = -DSAPSYSTEM=01
  argv[6] = -DSAPSYSTEMNAME=BW7
  argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
  argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
  argv[9] = -DFRFC_FALLBACK=ON
  argv[10] = -DFRFC_FALLBACK_HOST=localhost
  start_lazy = 0
  start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:27:05 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:27:25 2007
J2EE server info
  start = TRUE
  state = STARTED
  pid = 5504
  argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
  argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
  argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
  argv[3] = -DSAPSTART=1
  argv[4] = -DCONNECT_PORT=1719
  argv[5] = -DSAPSYSTEM=01
  argv[6] = -DSAPSYSTEMNAME=BW7
  argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
  argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
  argv[9] = -DFRFC_FALLBACK=ON
  argv[10] = -DFRFC_FALLBACK_HOST=localhost
  start_lazy = 0
  start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:27:45 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:28:05 2007
J2EE server info
  start = TRUE
  state = STARTED
  pid = 6008
  argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
  argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
  argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
  argv[3] = -DSAPSTART=1
  argv[4] = -DCONNECT_PORT=1730
  argv[5] = -DSAPSYSTEM=01
  argv[6] = -DSAPSYSTEMNAME=BW7
  argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
  argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
  argv[9] = -DFRFC_FALLBACK=ON
  argv[10] = -DFRFC_FALLBACK_HOST=localhost
  start_lazy = 0
  start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:28:25 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:28:45 2007
J2EE server info
  start = TRUE
  state = STARTED
  pid = 1900
  argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
  argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
  argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
  argv[3] = -DSAPSTART=1
  argv[4] = -DCONNECT_PORT=1735
  argv[5] = -DSAPSYSTEM=01
  argv[6] = -DSAPSYSTEMNAME=BW7
  argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
  argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
  argv[9] = -DFRFC_FALLBACK=ON
  argv[10] = -DFRFC_FALLBACK_HOST=localhost
  start_lazy = 0
  start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:29:05 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:29:25 2007
J2EE server info
  start = TRUE
  state = STARTED
  pid = 7468
  argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
  argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
  argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
  argv[3] = -DSAPSTART=1
  argv[4] = -DCONNECT_PORT=1741
  argv[5] = -DSAPSYSTEM=01
  argv[6] = -DSAPSYSTEMNAME=BW7
  argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
  argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
  argv[9] = -DFRFC_FALLBACK=ON
  argv[10] = -DFRFC_FALLBACK_HOST=localhost
  start_lazy = 0
  start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:29:45 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:30:05 2007
J2EE server info
  start = TRUE
  state = STARTED
  pid = 8000
  argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
  argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
  argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
  argv[3] = -DSAPSTART=1
  argv[4] = -DCONNECT_PORT=1750
  argv[5] = -DSAPSYSTEM=01
  argv[6] = -DSAPSYSTEMNAME=BW7
  argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
  argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
  argv[9] = -DFRFC_FALLBACK=ON
  argv[10] = -DFRFC_FALLBACK_HOST=localhost
  start_lazy = 0
  start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:30:25 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:30:45 2007
J2EE server info
  start = TRUE
  state = STARTED
  pid = 7668
  argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
  argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
  argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
  argv[3] = -DSAPSTART=1
  argv[4] = -DCONNECT_PORT=1757
  argv[5] = -DSAPSYSTEM=01
  argv[6] = -DSAPSYSTEMNAME=BW7
  argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
  argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
  argv[9] = -DFRFC_FALLBACK=ON
  argv[10] = -DFRFC_FALLBACK_HOST=localhost
  start_lazy = 0
  start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:31:05 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:31:25 2007
J2EE server info
  start = TRUE
  state = STARTED
  pid = 3868
  argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
  argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
  argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
  argv[3] = -DSAPSTART=1
  argv[4] = -DCONNECT_PORT=1764
  argv[5] = -DSAPSYSTEM=01
  argv[6] = -DSAPSYSTEMNAME=BW7
  argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
  argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
  argv[9] = -DFRFC_FALLBACK=ON
  argv[10] = -DFRFC_FALLBACK_HOST=localhost
  start_lazy = 0
  start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:31:45 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:32:05 2007
J2EE server info
  start = TRUE
  state = STARTED
  pid = 6640
  argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
  argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
  argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
  argv[3] = -DSAPSTART=1
  argv[4] = -DCONNECT_PORT=1773
  argv[5] = -DSAPSYSTEM=01
  argv[6] = -DSAPSYSTEMNAME=BW7
  argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
  argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
  argv[9] = -DFRFC_FALLBACK=ON
  argv[10] = -DFRFC_FALLBACK_HOST=localhost
  start_lazy = 0
  start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:32:25 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN

the following is teh Dev_wo trace file
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ

B Mon Apr 23 13:51:31 2007
B  create_con (con_name=R/3)
B  Loading DB library 'D:\usr\sap\BW7\DVEBMGS01\exe\dbmssslib.dll' ...
B  Library 'D:\usr\sap\BW7\DVEBMGS01\exe\dbmssslib.dll' loaded
B  Version of 'D:\usr\sap\BW7\DVEBMGS01\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
B  New connection 0 created
M sysno      01
M sid        BW7
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    75
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        3012
M
M  kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M  length of sys_adm_ext is 572 bytes
M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3012) [dpxxdisp.c   1299]
I  MtxInit: 30000 0 0
M  DpSysAdmExtCreate: ABAP is active
M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active

M Mon Apr 23 13:51:32 2007
M  DpShMCreate: sizeof(wp_adm)          22528     (1408)
M  DpShMCreate: sizeof(tm_adm)          3994272     (19872)
M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M  DpShMCreate: sizeof(comm_adm)          528064     (1048)
M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M  DpShMCreate: sizeof(file_adm)          0     (72)
M  DpShMCreate: sizeof(vmc_adm)          0     (1440)
M  DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M  DpShMCreate: sizeof(gw_adm)     48
M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 07880040, size: 4657592)
M  DpShMCreate: allocated sys_adm at 07880040
M  DpShMCreate: allocated wp_adm at 07881E40
M  DpShMCreate: allocated tm_adm_list at 07887640
M  DpShMCreate: allocated tm_adm at 07887670
M  DpShMCreate: allocated wp_ca_adm at 07C56910
M  DpShMCreate: allocated appc_ca_adm at 07C5C6D0
M  DpShMCreate: allocated comm_adm at 07C5E610
M  DpShMCreate: system runs without file table
M  DpShMCreate: allocated vmc_adm_list at 07CDF4D0
M  DpShMCreate: allocated gw_adm at 07CDF510
M  DpShMCreate: system runs without vmc_adm
M  DpShMCreate: allocated ca_info at 07CDF540
M  DpShMCreate: allocated wall_adm at 07CDF548
X  EmInit: MmSetImplementation( 2 ).
X  MM global diagnostic options set: 0
X  <ES> client 0 initializing ....
X  Using implementation flat
M  <EsNT> Memory Reset disabled as NT default
X  ES initialized.
M  ThInit: running on host blrkecesbibw

M Mon Apr 23 13:51:33 2007
M  calling db_connect ...
C  Thread ID:5412
C  Thank You for using the SLOLEDB-interface
C  Using dynamic link library 'D:\usr\sap\BW7\DVEBMGS01\exe\dbmssslib.dll'
C  dbmssslib.dll patch info
C    patchlevel   0
C    patchno      72
C    patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C  np:(local) connection used on BLRKECESBIBW
C  CopyLocalParameters: dbuser is 'bw7'
C  Provider SQLNCLI could not be initialized. See note #734034 for more information.
C  Using provider SQLOLEDB instead.
C  OpenOledbConnection: MARS property was not set.
C  Provider Release:08.10.1830
C  Provider SQLNCLI could not be initialized. See note #734034 for more information.
C  Using provider SQLOLEDB instead.
C  Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 500 dynamic statements (2844000 bytes), total 34364068 bytes
C  Using shared procedure name cache BLRKECESBIBW_BW7BW7_BW7_MEM initialized by another process.
C  Connected to db server : [BLRKECESBIBW] server_used : [np:(local)], dbname: BW7, dbuser: bw7
C  pn_id:BLRKECESBIBW_BW7BW7_BW7
C  Not using MARS (on sql 8.0)
B  Connection 0 opened (DBSL handle 0)
B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20070423 135133 BLRKECESBIBW   
C  The IRow interface is supported by this OLEDB provider
M  db_connect o.k.
M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif

I Mon Apr 23 13:51:35 2007
I  MtxInit: 0 0 0
M  SHM_PRES_BUF               (addr: 0CD00040, size: 4400000)
M  SHM_ROLL_AREA          (addr: A2110040, size: 143360000)
M  SHM_PAGING_AREA          (addr: 103F0040, size: 65536000)
M  SHM_ROLL_ADM               (addr: 0D140040, size: 1432040)
M  SHM_PAGING_ADM          (addr: 0D2A0040, size: 525344)
M  ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 0D330040
M  ThCreateNoBuffer          index size: 3000 elems
M  ThCreateVBAdm          allocated 12160 bytes (50 server) at 0D3C0040
X  EmInit: MmSetImplementation( 2 ).
X  MM global diagnostic options set: 0
X  <ES> client 0 initializing ....
X  Using implementation flat
X  ES initialized.
B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 16, CON_ID = -1
B  dbtbxbuf: Buffer TABL  (addr: 154200C8, size: 30000000, end: 170BC448)
B  dbtbxbuf: Buffer TABLP (addr: 170C00C8, size: 10240000, end: 17A840C8)
B  dbexpbuf: Buffer EIBUF (addr: 17A900D0, size: 4194304, end: 17E900D0)
B  dbexpbuf: Buffer ESM   (addr: 17EA00D0, size: 4194304, end: 182A00D0)
B  dbexpbuf: Buffer CUA   (addr: 0FC200D0, size: 3072000, end: 0FF0E0D0)
B  dbexpbuf: Buffer OTR   (addr: 182B00D0, size: 4194304, end: 186B00D0)
M  CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
C  Provider SQLNCLI could not be initialized. See note #734034 for more information.
C  Using provider SQLOLEDB instead.
S  *** init spool environment
S  initialize debug system
T  Stack direction is downwards.
T  debug control: prepare exclude for printer trace
T  new memory block 05C427B0
S  spool kernel/ddic check: Ok
S  using table TSP02FX for frontend printing
S  1 spool work process(es) found
S  frontend print via spool service enabled
S  printer list size is 150
S  printer type list size is 50
S  queue size (profile)   = 300
S  hostspool list size = 3000
S  option list size is 30
S      found processing queue enabled
S  found spool memory service RSPO-RCLOCKS at 1C7200A8
S  doing lock recovery
S  setting server cache root
S  found spool memory service RSPO-SERVERCACHE at 1C7204F0
S    using messages for server info
S  size of spec char cache entry: 297028 bytes (timeout 100 sec)
S  size of open spool request entry: 2132 bytes
S  immediate print option for implicitely closed spool requests is disabled

A  -PXA--
A  PXA INITIALIZATION
A  PXA: Fragment Size too small: 21 MB, reducing # of fragments
A  System page size: 4kb, total admin_size: 11740kb, dir_size: 11676kb.
A  Attached to PXA (address AA9E0040, size 350000K)
A  abap/pxa = shared protect gen_remote
A  PXA INITIALIZATION FINISHED
A  -PXA--

A  ABAP ShmAdm attached (addr=5731C000 leng=20955136 end=58718000)
A  >> Shm MMADM area (addr=57791EB8 leng=126176 end=577B0B98)
A  >> Shm MMDAT area (addr=577B1000 leng=16150528 end=58718000)
A  RFC Destination> destination blrkecesbibw_BW7_01 host blrkecesbibw system BW7 systnr 1 (blrkecesbibw_BW7_01)
A  RFC Options> H=blrkecesbibw,S=01,d=2,
A  RFC FRFC> fallback activ but this is not a central instance.
A   
A  RFC rfc/signon_error_log = -1
A  RFC rfc/dump_connection_info = 0
A  RFC rfc/dump_client_info = 0
A  RFC rfc/cp_convert/ignore_error = 1
A  RFC rfc/cp_convert/conversion_char = 23
A  RFC rfc/wan_compress/threshold = 251
A  RFC rfc/recorder_pcs not set, use defaule value: 2
A  RFC rfc/delta_trc_level not set, use default value: 0
A  RFC rfc/no_uuid_check not set, use default value: 0
A  RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A  RFC Method> initialize RemObjDriver for ABAP Objects
M  ThrCreateShObjects          allocated 16892 bytes at 0FF90040
N  SsfSapSecin: putenv(SECUDIR=D:\usr\sap\BW7\DVEBMGS01\sec): ok

N  =================================================
N  === SSF INITIALIZATION:
N  ===...SSF Security Toolkit name SAPSECULIB .
N  ===...SSF trace level is 0 .
N  ===...SSF library is D:\usr\sap\BW7\DVEBMGS01\exe\sapsecu.dll .
N  ===...SSF hash algorithm is SHA1 .
N  ===...SSF symmetric encryption algorithm is DES-CBC .
N  ===...sucessfully completed.
N  =================================================
N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M  JrfcVmcRegisterNativesDriver o.k.
W  =================================================
W  === ipl_Init() called
B    dbtran INFO (init_connection '<DEFAULT>' [MSSQL:700.08]):
B     max_blocking_factor =  50,  max_in_blocking_factor      = 255,
B     min_blocking_factor =   5,  min_in_blocking_factor      =  10,
B     prefer_union_all    =   1,  prefer_join                 =   1,
B     prefer_fix_blocking =   0,  prefer_in_itab_opt          =   0,
B     convert AVG         =   1,  alias table FUPD            =   0,
B     escape_as_literal   =   0,  opt GE LE to BETWEEN        =   0,
B     select *            =0x00,  character encoding          = STD / []:X,
B     use_hints           = abap->1, dbif->0x1, upto->0, rule_in->0,
B                           rule_fae->0, concat_fae->0, concat_fae_or->0
W    ITS Plugin: Path dw_gui
W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
W    ITS Plugin: sizeof(SAP_UC) 2
W    ITS Plugin: Release: 700, [7000.0.75.20050900]
W    ITS Plugin: Int.version, [32]
W    ITS Plugin: Feature set: [10]
W    ===... Calling itsp_Init in external dll ===>
W  === ipl_Init() returns 0, ITSPE_OK: OK
W  =================================================
E  Replication is disabled
E  EnqCcInitialize: local lock table initialization o.k.
E  EnqId_SuppressIpc: local EnqId initialization o.k.
E  EnqCcInitialize: local enqueue client init o.k.

S Mon Apr 23 13:51:36 2007
S  server @>SSRV:blrkecesbibw_BW7_01@< appears or changes (state 1)
C  The IRow interface is supported by this OLEDB provider

M Mon Apr 23 13:51:37 2007
M  SecAudit(RsauShmInit): WP attached to existing shared memory.
M  SecAudit(RsauShmInit): addr of SCSA........... = 06060040
M  SecAudit(RsauShmInit): addr of RSAUSHM........ = 060607A8
M  SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 060607E0
M  SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 060607EC

B Mon Apr 23 13:51:51 2007
B  table logging switched off for all clients

S Mon Apr 23 13:56:51 2007
S  found spool memory service RSPO-ACTIONS at 1C729BB8

Similar Messages

  • Netweaver 7.3 installation error while starting dispatcher

    Hi Experts
    I am installing PI 7.3 on a distributive host Linux RHEL 5.7 & Oracle 11.2g
    I have installed ASCS & SCS and DB instance and now i am installing CI while installing CI its stuck while starting dispatcher
    Please see the below logs
    dev_disp trace
    pTraceWpStatus: child (pid=9939) exited with exit code 255
    DpUnlockWpAdm: force unlock of wp_adm mutex W12
    DpProcFreeBlks: free blocks for WORK_PROCESS (pid=9939; flags=3)
    DpListRemove: remove elem 12 from wpadm_btc_list
    DpListRemove: 0 elems in wpadm_btc_list
    DpListRemove: elem 12 not in wpadm_free_btc_list
    DpHdlDeadWp: handling of W12 o.k.
    DpGetMsgTypes: my types = MS_DIA,MS_VB,MS_BTC,MS_SPO,MS_VB2,MS_ICMAN
    DpGetMsgTypes: my types = MS_DIA,MS_VB,MS_BTC,MS_SPO,MS_VB2,MS_ICMAN
    DpGetMsgTypes: my types = MS_DIA,MS_VB,MS_BTC,MS_SPO,MS_VB2,MS_ICMAN
    DpGetMsgTypes: my types = MS_DIA,MS_VB,MS_BTC,MS_SPO,MS_VB2,MS_ICMAN
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN
    dev_w0 trace
    ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
    [dbcon.c      5081]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 008192)
    I already have a dbms_type=ORA set , R3trans -D works fine .
    i have checked many posts here but its not helping me .
    I have restarted the server and done the cleanipc as well
    Any help will be much appreciated.
    Thanks
    dEE

    ORA-12154:
    TNS:could not resolve the connect identifier specified
    Cause:      A connection to a database or other service was requested using a connect identifier, and the connect identifier specified could not be resolved into a connect descriptor using one of the naming methods configured. For example, if the type of connect identifier used was a net service name then the net service name could not be found in a naming method repository, or the repository could not be located or reached.
    Action:     
    - If you are using local naming (TNSNAMES.ORA file):
    - Make sure that "TNSNAMES" is listed as one of the values of the NAMES.DIRECTORY_PATH parameter in the Oracle Net profile (SQLNET.ORA)
    - Verify that a TNSNAMES.ORA file exists and is in the proper directory and is accessible.
    - Check that the net service name used as the connect identifier exists in the TNSNAMES.ORA file.
    - Make sure there are no syntax errors anywhere in the TNSNAMES.ORA file. Look for unmatched parentheses or stray characters. Errors in a TNSNAMES.ORA file may make it unusable.
    - If you are using directory naming:
    - Verify that "LDAP" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
    - Verify that the LDAP directory server is up and that it is accessible.
    - Verify that the net service name or database name used as the connect identifier is configured in the directory.
    - Verify that the default context being used is correct by specifying a fully qualified net service name or a full LDAP DN as the connect identifier
    - If you are using easy connect naming:
    - Verify that "EZCONNECT" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
    - Make sure the host, port and service name specified are correct.
    - Try enclosing the connect identifier in quote marks. See the Oracle Net Services Administrators Guide or the Oracle operating system specific guide for more information on naming.

  • Error while starting  Soa Managed server on weblogic11g

    Hi All,
    I am facing one issue while starting the soa managed server on weblogic11g.
    it gives error like :
    "<Error> <Socket> <BEA-000405> <Uncaught Throwable in processSockets
    java.lang.NoClassDefFoundError: java/lang/IOException.
    java.lang.NoClassDefFoundError: java/lang/IOException
    What can be done to get over this issue & start the soa server ???
    Thanks & Regards,
    Nupur

    Hi,
    Full stack trace of log is :
    <Apr 12, 2011 7:04:19 AM IST> <Error> <Socket> <BEA-000405> <Uncaught Throwable in processSockets
    java.lang.NoClassDefFoundError: java/lang/IOException.
    java.lang.NoClassDefFoundError: java/lang/IOException
         at jrockit.ext.epoll.EPoll.epollCtl0(Native Method)
         at jrockit.ext.epoll.EPoll.epollEnableOneshot(EPoll.java:87)
         at weblogic.socket.EPollSocketMuxer.read(EPollSocketMuxer.java:84)
         at weblogic.socket.BaseAbstractMuxableSocket.dispatch(BaseAbstractMuxableSocket.java:302)
         at weblogic.socket.MuxableSocketDiscriminator.dispatch(MuxableSocketDiscriminator.java:177)
         Truncated. see log file for complete stacktrace
    >
    <Apr 12, 2011 7:04:41 AM IST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'soademoDatabase1' due to error weblogic.application.ModuleException: .
    weblogic.application.ModuleException:
         at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:290)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:508)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
         Truncated. see log file for complete stacktrace
    Caused By: weblogic.common.ResourceException: ORA-28001: the password has expired
         at weblogic.jdbc.common.internal.XAConnectionEnvFactory.makeConnection(XAConnectionEnvFactory.java:479)
         at weblogic.jdbc.common.internal.XAConnectionEnvFactory.createResource(XAConnectionEnvFactory.java:173)
         at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1193)
         at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1117)
         at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:244)
         Truncated. see log file for complete stacktrace
    Apr 12, 2011 7:05:49 AM IST> <Error> <Socket> <BEA-000405> <Uncaught Throwable in processSockets
    java.lang.NoClassDefFoundError: java/lang/IOException.
    java.lang.NoClassDefFoundError: java/lang/IOException
         at jrockit.ext.epoll.EPoll.epollCtl0(Native Method)
         at jrockit.ext.epoll.EPoll.epollEnableOneshot(EPoll.java:87)
         at weblogic.socket.EPollSocketMuxer.read(EPollSocketMuxer.java:84)
         at weblogic.socket.BaseAbstractMuxableSocket.dispatch(BaseAbstractMuxableSocket.java:302)
         at weblogic.socket.MuxableSocketDiscriminator.dispatch(MuxableSocketDiscriminator.java:177)
         Truncated. see log file for complete stacktrace
    <Apr 12, 2011 7:05:53 AM IST> <Warning> <oracle.sdp.messaging.driver.base> <SDP-26024> <Registration of driver Email-Driver did not complete; will retry periodically until messaging server responds.>
    <Apr 12, 2011 7:05:56 AM IST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'FtpAdapter' due to error weblogic.application.ModuleException: weblogic.connector.exception.RAException: Jndi Name is null or empty..
    weblogic.application.ModuleException: weblogic.connector.exception.RAException: Jndi Name is null or empty.
         at weblogic.connector.deploy.ConnectorModule.prepare(ConnectorModule.java:224)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:508)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
         Truncated. see log file for complete stacktrace
    No this is not a clustered environment.
    yeah but under domains there are two domains we have created.
    i.e. domains/ domain1 domain2
    both are having soa servers as managed server.
    in one domain soa is up but in domain2 it is not getting up causing above errors while starting.
    FYI : It is causing problem now only.. before this , soa server on both the server have been up & running simultaneously.
    Regards,
    Nupur

  • Sata Errors on start-up.

    Hello, when I boot my laptop it gives me a repeating error after the Grub screen.
    [164266.343653] ata1.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x6 frozen
    [164266.343662] ata1.00: failed command: WRITE FPDMA QUEUED
    [164266.343671] ata1.00: cmd 61/08:00:b8:02:47/00:00:13:00:00/40 tag 0 ncq 4096 out
    res 40/00:00:00:4f:c2/00:00:00:00:00/40 Emask 0x4 (timeout)
    [164266.343676] ata1.00: status: { DRDY }
    [164266.343680] ata1.00: failed command: WRITE FPDMA QUEUED
    [164266.343688] ata1.00: cmd 61/80:08:c0:02:47/00:00:13:00:00/40 tag 1 ncq 65536 out
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [164266.343692] ata1.00: status: { DRDY }
    [164266.343702] ata1.00: failed command: READ FPDMA QUEUED
    [164266.343709] ata1.00: cmd 60/00:10:e8:29:30/01:00:18:00:00/40 tag 2 ncq 131072 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [164266.343713] ata1.00: status: { DRDY }
    [164266.343716] ata1.00: failed command: READ FPDMA QUEUED
    [164266.343724] ata1.00: cmd 60/00:18:e8:2a:30/01:00:18:00:00/40 tag 3 ncq 131072 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [164266.343727] ata1.00: status: { DRDY }
    I am able to boot into my system, but it often will go through this error about 3-5 times.
    smartctl -a /dev/sda give me
    === START OF INFORMATION SECTION ===
    Device Model: SAMSUNG MZHPU128HCGM-00000
    Serial Number: S1ACNYAD532800
    LU WWN Device Id: 5 002538 60000baf3
    Firmware Version: UXM6401Q
    User Capacity: 128,035,676,160 bytes [128 GB]
    Sector Size: 512 bytes logical/physical
    Rotation Rate: Solid State Device
    Device is: Not in smartctl database [for details use: -P showall]
    ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
    SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
    Local Time is: Fri Jan 24 15:52:31 2014 PST
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    General SMART Values:
    Offline data collection status: (0x00) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: ( 0) seconds.
    Offline data collection
    capabilities: (0x5f) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Abort Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    No Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 10) minutes.
    SCT capabilities: (0x003d) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.
    SMART Attributes Data Structure revision number: 1
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1484
    12 Power_Cycle_Count 0x0032 094 094 000 Old_age Always - 5417
    177 Wear_Leveling_Count 0x0013 097 097 017 Pre-fail Always - 299
    178 Used_Rsvd_Blk_Cnt_Chip 0x0013 088 088 010 Pre-fail Always - 151
    179 Used_Rsvd_Blk_Cnt_Tot 0x0013 089 089 010 Pre-fail Always - 272
    180 Unused_Rsvd_Blk_Cnt_Tot 0x0013 089 089 010 Pre-fail Always - 2352
    183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
    SMART Error Log Version: 1
    No Errors Logged
    SMART Self-test log structure revision number 1
    No self-tests have been logged. [To run self-tests, use: smartctl -t]
    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.
    there are no logged errors which i find interesting.
    This is what i get from dmesg, you can see the ata stuff about halfway down, included thee rest in case it is relevant.
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s86464 r8192 d24128 u524288
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1008698
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda1 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3951964K/4098932K available (5116K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 146968K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] NR_IRQS:8448 nr_irqs:984 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2294.540 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4590.29 BogoMIPS (lpj=7648466)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000027] Security Framework initialized
    [ 0.000033] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000034] Yama: becoming mindful.
    [ 0.000286] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001041] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.001369] Mount-cache hash table entries: 256
    [ 0.001524] Initializing cgroup subsys memory
    [ 0.001546] Initializing cgroup subsys devices
    [ 0.001548] Initializing cgroup subsys freezer
    [ 0.001549] Initializing cgroup subsys net_cls
    [ 0.001550] Initializing cgroup subsys blkio
    [ 0.001570] CPU: Physical Processor ID: 0
    [ 0.001571] CPU: Processor Core ID: 0
    [ 0.001575] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.002546] mce: CPU supports 7 MCE banks
    [ 0.002557] CPU0: Thermal monitoring enabled (TM1)
    [ 0.002567] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
    tlb_flushall_shift: 6
    [ 0.002659] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.003422] ACPI: Core revision 20130725
    [ 0.012141] ACPI: All ACPI Tables successfully acquired
    [ 0.019369] ftrace: allocating 20317 entries in 80 pages
    [ 0.027987] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.060971] smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz (fam: 06, model: 45, stepping: 01)
    [ 0.060979] TSC deadline timer enabled
    [ 0.060986] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.060992] ... version: 3
    [ 0.060993] ... bit width: 48
    [ 0.060994] ... generic registers: 4
    [ 0.060995] ... value mask: 0000ffffffffffff
    [ 0.060996] ... max period: 0000ffffffffffff
    [ 0.060997] ... fixed-purpose events: 3
    [ 0.060998] ... event mask: 000000070000000f
    [ 0.098662] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.084392] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
    [ 0.140519] Brought up 4 CPUs
    [ 0.140522] smpboot: Total of 4 processors activated (18363.16 BogoMIPS)
    [ 0.144090] devtmpfs: initialized
    [ 0.146069] PM: Registering ACPI NVS region [mem 0xca4bb000-0xca4c1fff] (28672 bytes)
    [ 0.146071] PM: Registering ACPI NVS region [mem 0xdab56000-0xdbaaafff] (16076800 bytes)
    [ 0.146906] RTC time: 17:26:02, date: 01/24/14
    [ 0.146938] NET: Registered protocol family 16
    [ 0.147017] cpuidle: using governor ladder
    [ 0.147018] cpuidle: using governor menu
    [ 0.147040] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.147042] ACPI: bus type PCI registered
    [ 0.147043] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.147085] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.147086] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.153209] PCI: Using configuration type 1 for base access
    [ 0.153712] bio: create slab <bio-0> at 0
    [ 0.153800] ACPI: Added _OSI(Module Device)
    [ 0.153802] ACPI: Added _OSI(Processor Device)
    [ 0.153803] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.153804] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.155436] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.202559] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.204584] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.205103] ACPI: SSDT 00000000dab34c18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.205507] ACPI: Dynamic OEM Table Load:
    [ 0.205509] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.214255] ACPI: SSDT 00000000dab34618 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.214935] ACPI: Dynamic OEM Table Load:
    [ 0.214937] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.227395] ACPI: SSDT 00000000daae6d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.227971] ACPI: Dynamic OEM Table Load:
    [ 0.227973] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.241337] ACPI: Interpreter enabled
    [ 0.241348] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 0.241356] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.241378] ACPI: (supports S0 S3 S4 S5)
    [ 0.241380] ACPI: Using IOAPIC for interrupt routing
    [ 0.241412] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.241594] ACPI: No dock devices found.
    [ 0.286876] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.287110] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    [ 0.287277] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
    [ 0.287950] PCI host bridge to bus 0000:00
    [ 0.287952] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.287954] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.287956] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.287957] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.287959] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.287960] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.287961] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.287962] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.287964] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.287965] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.287966] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
    [ 0.287974] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
    [ 0.288152] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
    [ 0.288163] pci 0000:00:02.0: reg 0x10: [mem 0xf6400000-0xf67fffff 64bit]
    [ 0.288170] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.288174] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 0.288346] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
    [ 0.288353] pci 0000:00:03.0: reg 0x10: [mem 0xf7d14000-0xf7d17fff 64bit]
    [ 0.288546] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
    [ 0.288562] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
    [ 0.288614] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.288748] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.288780] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
    [ 0.288799] pci 0000:00:16.0: reg 0x10: [mem 0xf7d1c000-0xf7d1c01f 64bit]
    [ 0.288862] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.289032] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
    [ 0.289045] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit]
    [ 0.289100] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.289235] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.289270] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
    [ 0.289338] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.289476] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.289513] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
    [ 0.289580] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.289719] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.289754] pci 0000:00:1c.4: [8086:9c1a] type 01 class 0x060400
    [ 0.289822] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.289960] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 0.289995] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
    [ 0.290014] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d1a000-0xf7d1a3ff]
    [ 0.290097] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.290246] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.290278] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
    [ 0.290534] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
    [ 0.290547] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d19000-0xf7d190ff 64bit]
    [ 0.290564] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
    [ 0.290836] pci 0000:01:00.0: [8086:08b1] type 00 class 0x028000
    [ 0.290876] pci 0000:01:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
    [ 0.291040] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
    [ 0.291084] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 0.297349] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.297356] pci 0000:00:1c.0: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 0.297440] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 0.297445] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
    [ 0.297449] pci 0000:00:1c.3: bridge window [mem 0xf7200000-0xf7bfffff]
    [ 0.297455] pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf13fffff 64bit pref]
    [ 0.297600] pci 0000:03:00.0: [144d:a800] type 00 class 0x010601
    [ 0.297671] pci 0000:03:00.0: reg 0x24: [mem 0xf6810000-0xf6811fff]
    [ 0.297687] pci 0000:03:00.0: reg 0x30: [mem 0xf6800000-0xf680ffff pref]
    [ 0.297750] pci 0000:03:00.0: PME# supported from D3hot D3cold
    [ 0.297784] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 0.307334] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 0.307338] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    [ 0.307342] pci 0000:00:1c.4: bridge window [mem 0xf6800000-0xf71fffff]
    [ 0.307347] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
    [ 0.307382] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.328006] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.328066] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
    [ 0.328122] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.328177] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.328232] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.328287] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.328352] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 0.328401] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.328837] ACPI: Enabled 3 GPEs in block 00 to 7F
    [ 0.328844] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.328934] Found 1 acpi root devices
    [ 0.329121] ACPI: EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62
    [ 0.329212] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.329215] vgaarb: loaded
    [ 0.329216] vgaarb: bridge control possible 0000:00:02.0
    [ 0.329252] PCI: Using ACPI for IRQ routing
    [ 0.330513] PCI: pci_cache_line_size set to 64 bytes
    [ 0.330545] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.330547] e820: reserve RAM buffer [mem 0xca4bb000-0xcbffffff]
    [ 0.330548] e820: reserve RAM buffer [mem 0xca8e5000-0xcbffffff]
    [ 0.330549] e820: reserve RAM buffer [mem 0xda898000-0xdbffffff]
    [ 0.330551] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
    [ 0.330617] NetLabel: Initializing
    [ 0.330618] NetLabel: domain hash size = 128
    [ 0.330618] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.330629] NetLabel: unlabeled traffic allowed by default
    [ 0.330642] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.330651] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.332671] Switched to clocksource hpet
    [ 0.336308] pnp: PnP ACPI init
    [ 0.336319] ACPI: bus type PNP registered
    [ 0.336423] pnp 00:00: [dma 4]
    [ 0.336442] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.336459] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.336535] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.336627] system 00:03: [io 0x0680-0x069f] has been reserved
    [ 0.336629] system 00:03: [io 0x2008-0x200b] has been reserved
    [ 0.336631] system 00:03: [io 0xffff] has been reserved
    [ 0.336632] system 00:03: [io 0xffff] has been reserved
    [ 0.336634] system 00:03: [io 0x1c00-0x1cfe] has been reserved
    [ 0.336635] system 00:03: [io 0x1d00-0x1dfe] has been reserved
    [ 0.336638] system 00:03: [io 0x1e00-0x1efe] has been reserved
    [ 0.336640] system 00:03: [io 0x1f00-0x1ffe] has been reserved
    [ 0.336641] system 00:03: [io 0x1800-0x18fe] could not be reserved
    [ 0.336643] system 00:03: [io 0x164e-0x164f] has been reserved
    [ 0.336645] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.336668] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.336702] system 00:05: [io 0x1854-0x1857] has been reserved
    [ 0.336705] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.336736] system 00:06: [io 0x04d0-0x04d1] has been reserved
    [ 0.336738] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.336768] pnp 00:07: Plug and Play ACPI device, IDs SNYa009 PNP030b (active)
    [ 0.336802] pnp 00:08: Plug and Play ACPI device, IDs FOX0015 PNP0f13 (active)
    [ 0.349893] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.349896] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.349899] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.349901] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.349903] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.349906] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.349908] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.349910] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.349912] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.349915] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.349917] system 00:09: [mem 0xf7fef000-0xf7feffff] has been reserved
    [ 0.349919] system 00:09: [mem 0xf7ff0000-0xf7ffffff] has been reserved
    [ 0.349922] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.350197] pnp: PnP ACPI: found 10 devices
    [ 0.350198] ACPI: bus type PNP unregistered
    [ 0.356468] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
    [ 0.356471] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
    [ 0.356484] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.356485] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.356489] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf200000-0xdf3fffff 64bit pref]
    [ 0.356491] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
    [ 0.356493] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.356496] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 0.356500] pci 0000:00:1c.0: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 0.356503] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf3fffff 64bit pref]
    [ 0.356507] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 0.356509] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
    [ 0.356513] pci 0000:00:1c.3: bridge window [mem 0xf7200000-0xf7bfffff]
    [ 0.356516] pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf13fffff 64bit pref]
    [ 0.356521] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 0.356523] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    [ 0.356526] pci 0000:00:1c.4: bridge window [mem 0xf6800000-0xf71fffff]
    [ 0.356529] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
    [ 0.356534] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.356536] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.356537] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.356539] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.356540] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.356541] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.356543] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 0.356544] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 0.356545] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 0.356547] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff]
    [ 0.356548] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 0.356550] pci_bus 0000:01: resource 1 [mem 0xf7c00000-0xf7cfffff]
    [ 0.356551] pci_bus 0000:01: resource 2 [mem 0xdf200000-0xdf3fffff 64bit pref]
    [ 0.356553] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
    [ 0.356554] pci_bus 0000:02: resource 1 [mem 0xf7200000-0xf7bfffff]
    [ 0.356555] pci_bus 0000:02: resource 2 [mem 0xf0a00000-0xf13fffff 64bit pref]
    [ 0.356557] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    [ 0.356558] pci_bus 0000:03: resource 1 [mem 0xf6800000-0xf71fffff]
    [ 0.356559] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf09fffff 64bit pref]
    [ 0.356585] NET: Registered protocol family 2
    [ 0.356724] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.356813] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.356873] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.356888] TCP: reno registered
    [ 0.356895] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.356909] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.356952] NET: Registered protocol family 1
    [ 0.356960] pci 0000:00:02.0: Boot video device
    [ 0.357196] PCI: CLS 64 bytes, default 64
    [ 0.357224] Unpacking initramfs...
    [ 0.407590] Freeing initrd memory: 3056K (ffff8800379f8000 - ffff880037cf4000)
    [ 0.407595] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.407597] software IO TLB [mem 0xd6898000-0xda898000] (64MB) mapped at [ffff8800d6898000-ffff8800da897fff]
    [ 0.407733] Scanning for low memory corruption every 60 seconds
    [ 0.407940] audit: initializing netlink socket (disabled)
    [ 0.407949] type=2000 audit(1390584362.399:1): initialized
    [ 0.419223] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.420210] zbud: loaded
    [ 0.420353] VFS: Disk quotas dquot_6.5.2
    [ 0.420384] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.420510] msgmni has been set to 7724
    [ 0.420720] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.420750] io scheduler noop registered
    [ 0.420751] io scheduler deadline registered
    [ 0.420772] io scheduler cfq registered (default)
    [ 0.421077] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.421091] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.421125] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 0.421126] vesafb: scrolling: redraw
    [ 0.421128] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.421958] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004800000, using 8128k, total 8128k
    [ 0.526303] pci_bus 0000:01: Allocating resources
    [ 0.526317] pci_bus 0000:02: Allocating resources
    [ 0.526325] pci_bus 0000:03: Allocating resources
    [ 0.526335] pci 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    [ 0.526342] pci 0000:00:00.0: no hotplug settings from platform
    [ 0.526343] pci 0000:00:00.0: using default PCI settings
    [ 0.526347] pci 0000:00:02.0: no hotplug settings from platform
    [ 0.526347] pci 0000:00:02.0: using default PCI settings
    [ 0.526351] pci 0000:00:03.0: no hotplug settings from platform
    [ 0.526353] pci 0000:00:14.0: no hotplug settings from platform
    [ 0.526353] pci 0000:00:14.0: using default PCI settings
    [ 0.526359] pci 0000:00:16.0: no hotplug settings from platform
    [ 0.526360] pci 0000:00:16.0: using default PCI settings
    [ 0.526365] pci 0000:00:1b.0: no hotplug settings from platform
    [ 0.526367] pcieport 0000:00:1c.0: no hotplug settings from platform
    [ 0.526374] pci 0000:01:00.0: no hotplug settings from platform
    [ 0.526376] pcieport 0000:00:1c.3: no hotplug settings from platform
    [ 0.526378] pcieport 0000:00:1c.4: no hotplug settings from platform
    [ 0.526382] pci 0000:03:00.0: no hotplug settings from platform
    [ 0.526384] pci 0000:00:1d.0: no hotplug settings from platform
    [ 0.526385] pci 0000:00:1d.0: using default PCI settings
    [ 0.526391] pci 0000:00:1f.0: no hotplug settings from platform
    [ 0.526392] pci 0000:00:1f.0: using default PCI settings
    [ 0.526399] pci 0000:00:1f.3: no hotplug settings from platform
    [ 0.526400] pci 0000:00:1f.3: using default PCI settings
    [ 0.594158] Console: switching to colour frame buffer device 240x67
    [ 0.764658] fb0: VESA VGA frame buffer device
    [ 0.764669] intel_idle: MWAIT substates: 0x11142120
    [ 0.764670] intel_idle: v0.4 model 0x45
    [ 0.764671] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.764812] GHES: HEST is not enabled!
    [ 0.764852] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.765178] Linux agpgart interface v0.103
    [ 0.765230] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.767228] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.767247] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.767317] mousedev: PS/2 mouse device common for all mice
    [ 0.767349] rtc_cmos 00:04: RTC can wake from S4
    [ 0.767460] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 0.767485] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.767492] Intel P-state driver initializing.
    [ 0.767499] Intel pstate controlling: cpu 0
    [ 0.767512] Intel pstate controlling: cpu 1
    [ 0.767521] Intel pstate controlling: cpu 2
    [ 0.767534] Intel pstate controlling: cpu 3
    [ 0.767632] drop_monitor: Initializing network drop monitor service
    [ 0.767691] TCP: cubic registered
    [ 0.767762] NET: Registered protocol family 10
    [ 0.767892] NET: Registered protocol family 17
    [ 0.767899] Key type dns_resolver registered
    [ 0.768078] registered taskstats version 1
    [ 0.768458] Magic number: 14:948:441
    [ 0.768520] rtc_cmos 00:04: setting system clock to 2014-01-24 17:26:03 UTC (1390584363)
    [ 0.768563] PM: Hibernation image not present or could not be loaded.
    [ 0.769226] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    [ 0.769227] Write protecting the kernel read-only data: 8192k
    [ 0.771461] Freeing unused kernel memory: 1016K (ffff880001502000 - ffff880001600000)
    [ 0.772297] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
    [ 0.779352] systemd-udevd[58]: starting version 208
    [ 0.785047] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.797392] ACPI: bus type USB registered
    [ 0.797414] usbcore: registered new interface driver usbfs
    [ 0.797421] usbcore: registered new interface driver hub
    [ 0.797466] usbcore: registered new device driver usb
    [ 0.797999] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.799071] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 0.799095] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.799102] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 0.799179] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.799199] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
    [ 0.799386] ehci-pci: EHCI PCI platform driver
    [ 0.799455] SCSI subsystem initialized
    [ 0.799607] hub 1-0:1.0: USB hub found
    [ 0.799622] hub 1-0:1.0: 9 ports detected
    [ 0.800521] libata version 3.00 loaded.
    [ 0.800968] ahci 0000:03:00.0: version 3.0
    [ 0.800973] pcieport 0000:00:1c.4: driver skip pci_set_master, fix it!
    [ 0.801055] ahci 0000:03:00.0: irq 57 for MSI/MSI-X
    [ 0.801379] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.801386] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 0.801629] hub 2-0:1.0: USB hub found
    [ 0.801641] hub 2-0:1.0: 4 ports detected
    [ 0.802611] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 0.802620] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.802628] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
    [ 0.802641] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.806555] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.806575] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1a000
    [ 0.812432] ahci 0000:03:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
    [ 0.812437] ahci 0000:03:00.0: flags: 64bit ncq led clo only pio ccc
    [ 0.812628] scsi0 : ahci
    [ 0.812693] ata1: SATA max UDMA/133 abar m8192@0xf6810000 port 0xf6810100 irq 57
    [ 0.815754] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.815943] hub 3-0:1.0: USB hub found
    [ 0.815950] hub 3-0:1.0: 2 ports detected
    [ 1.138987] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.139321] ata1.00: ATA-9: SAMSUNG MZHPU128HCGM-00000, UXM6401Q, max UDMA/133
    [ 1.139325] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.144409] ata1.00: configured for UDMA/133
    [ 1.144657] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZHPU128 UXM6 PQ: 0 ANSI: 5
    [ 1.146113] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
    [ 1.146270] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.146275] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.146356] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.146902] sda: sda1 sda2 sda3
    [ 1.147316] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.158944] usb 1-1: new full-speed USB device number 2 using xhci_hcd
    [ 1.182711] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.193496] usbcore: registered new interface driver usbhid
    [ 1.193500] usbhid: USB HID core driver
    [ 1.194234] input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input2
    [ 1.194309] holtek_mouse 0003:04D9:A067.0001: input,hidraw0: USB HID v1.10 Keyboard [Holtek USB Gaming Mouse] on usb-0000:00:14.0-1/input0
    [ 1.194319] holtek_mouse 0003:04D9:A067.0002: Fixing up report descriptor
    [ 1.196141] input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/input/input3
    [ 1.196456] holtek_mouse 0003:04D9:A067.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Holtek USB Gaming Mouse] on usb-0000:00:14.0-1/input1
    [ 1.196878] holtek_mouse 0003:04D9:A067.0003: hiddev0,hidraw2: USB HID v1.10 Device [Holtek USB Gaming Mouse] on usb-0000:00:14.0-1/input2
    [ 1.338940] usb 1-2: new high-speed USB device number 3 using xhci_hcd
    [ 1.408820] tsc: Refined TSC clocksource calibration: 2294.688 MHz
    [ 1.512165] usb 1-3: new full-speed USB device number 4 using xhci_hcd
    [ 1.530066] input: eGalax Inc. eGalaxTouch EXC7910-1031-12.00.03 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input4
    [ 1.530235] hid-multitouch 0003:0EEF:A108.0004: input,hiddev0,hidraw3: USB HID v2.10 Device [eGalax Inc. eGalaxTouch EXC7910-1031-12.00.03] on usb-0000:00:14.0-3/input0
    [ 1.688734] usb 1-5: new high-speed USB device number 5 using xhci_hcd
    [ 1.901948] usb 1-6: new full-speed USB device number 6 using xhci_hcd
    [ 2.021826] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [ 2.145681] hub 3-1:1.0: USB hub found
    [ 2.145760] hub 3-1:1.0: 8 ports detected
    [ 2.408347] Switched to clocksource tsc
    [ 31.345489] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x6 frozen
    [ 31.346708] ata1.00: failed command: READ FPDMA QUEUED
    [ 31.347389] ata1.00: cmd 60/08:00:18:34:e9/00:00:02:00:00/40 tag 0 ncq 4096 in
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 31.348976] ata1.00: status: { DRDY }
    [ 31.349377] ata1.00: failed command: READ FPDMA QUEUED
    [ 31.349939] ata1.00: cmd 60/08:08:77:29:54/00:00:02:00:00/40 tag 1 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 31.351514] ata1.00: status: { DRDY }
    [ 31.351915] ata1.00: failed command: READ FPDMA QUEUED
    [ 31.352479] ata1.00: cmd 60/08:10:b8:29:54/00:00:02:00:00/40 tag 2 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 31.354077] ata1.00: status: { DRDY }
    [ 31.354479] ata1: hard resetting link
    [ 31.678660] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 31.684167] ata1.00: configured for UDMA/133
    [ 31.684174] ata1.00: device reported invalid CHS sector 0
    [ 31.684176] ata1.00: device reported invalid CHS sector 0
    [ 31.684178] ata1.00: device reported invalid CHS sector 0
    [ 31.684201] ata1: EH complete
    [ 62.314918] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen
    [ 62.316149] ata1.00: failed command: READ FPDMA QUEUED
    [ 62.316812] ata1.00: cmd 60/08:00:00:37:e9/00:00:02:00:00/40 tag 0 ncq 4096 in
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 62.318399] ata1.00: status: { DRDY }
    [ 62.318799] ata1.00: failed command: READ FPDMA QUEUED
    [ 62.319361] ata1.00: cmd 60/08:08:b0:2c:54/00:00:02:00:00/40 tag 1 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 62.320933] ata1.00: status: { DRDY }
    [ 62.321334] ata1: hard resetting link
    [ 62.644766] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 62.650110] ata1.00: configured for UDMA/133
    [ 62.650116] ata1.00: device reported invalid CHS sector 0
    [ 62.650119] ata1.00: device reported invalid CHS sector 0
    [ 62.650139] ata1: EH complete
    [ 93.337663] ata1.00: exception Emask 0x0 SAct 0x38 SErr 0x0 action 0x6 frozen
    [ 93.338882] ata1.00: failed command: READ FPDMA QUEUED
    [ 93.339687] ata1.00: cmd 60/08:18:4f:00:00/00:00:00:00:00/40 tag 3 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 93.341450] ata1.00: status: { DRDY }
    [ 93.341861] ata1.00: failed command: READ FPDMA QUEUED
    [ 93.342423] ata1.00: cmd 60/a8:20:67:01:00/00:00:00:00:00/40 tag 4 ncq 86016 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 93.344007] ata1.00: status: { DRDY }
    [ 93.344408] ata1.00: failed command: READ FPDMA QUEUED
    [ 93.344971] ata1.00: cmd 60/30:28:0f:02:00/00:00:00:00:00/40 tag 5 ncq 24576 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 93.346555] ata1.00: status: { DRDY }
    [ 93.346957] ata1: hard resetting link
    [ 93.670838] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 93.676247] ata1.00: configured for UDMA/133
    [ 93.676255] ata1.00: device reported invalid CHS sector 0
    [ 93.676257] ata1.00: device reported invalid CHS sector 0
    [ 93.676259] ata1.00: device reported invalid CHS sector 0
    [ 93.676282] ata1: EH complete
    [ 93.686876] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 124.360434] ata1.00: NCQ disabled due to excessive errors
    [ 124.360439] ata1.00: exception Emask 0x0 SAct 0x7ff00003 SErr 0x0 action 0x6 frozen
    [ 124.361725] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.362498] ata1.00: cmd 60/08:00:3f:02:c0/00:00:00:00:00/40 tag 0 ncq 4096 in
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.364214] ata1.00: status: { DRDY }
    [ 124.364614] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.365177] ata1.00: cmd 60/08:08:3f:01:c0/00:00:00:00:00/40 tag 1 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.366753] ata1.00: status: { DRDY }
    [ 124.367154] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.367717] ata1.00: cmd 60/08:a0:e7:01:c0/00:00:00:00:00/40 tag 20 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.369300] ata1.00: status: { DRDY }
    [ 124.369700] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.370263] ata1.00: cmd 60/08:a8:ef:01:c0/00:00:00:00:00/40 tag 21 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.371849] ata1.00: status: { DRDY }
    [ 124.372249] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.372811] ata1.00: cmd 60/08:b0:f7:01:c0/00:00:00:00:00/40 tag 22 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.374396] ata1.00: status: { DRDY }
    [ 124.374796] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.375357] ata1.00: cmd 60/08:b8:ff:01:c0/00:00:00:00:00/40 tag 23 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.376941] ata1.00: status: { DRDY }
    [ 124.377342] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.377904] ata1.00: cmd 60/08:c0:07:02:c0/00:00:00:00:00/40 tag 24 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.379488] ata1.00: status: { DRDY }
    [ 124.379888] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.380452] ata1.00: cmd 60/08:c8:0f:02:c0/00:00:00:00:00/40 tag 25 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.448312] ata1.00: status: { DRDY }
    [ 124.481867] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.515807] ata1.00: cmd 60/08:d0:17:02:c0/00:00:00:00:00/40 tag 26 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.583914] ata1.00: status: { DRDY }
    [ 124.617736] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.651626] ata1.00: cmd 60/08:d8:1f:02:c0/00:00:00:00:00/40 tag 27 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.719780] ata1.00: status: { DRDY }
    [ 124.753483] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.787434] ata1.00: cmd 60/08:e0:27:02:c0/00:00:00:00:00/40 tag 28 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.855720] ata1.00: status: { DRDY }
    [ 124.889475] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.923145] ata1.00: cmd 60/08:e8:2f:02:c0/00:00:00:00:00/40 tag 29 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.991051] ata1.00: status: { DRDY }
    [ 125.024712] ata1.00: failed command: READ FPDMA QUEUED
    [ 125.058534] ata1.00: cmd 60/08:f0:37:02:c0/00:00:00:00:00/40 tag 30 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 125.126745] ata1.00: status: { DRDY }
    [ 125.160422] ata1: hard resetting link
    [ 125.486470] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 125.491949] ata1.00: configured for UDMA/133
    [ 125.491955] ata1.00: device reported invalid CHS sector 0
    [ 125.491957] ata1.00: device reported invalid CHS sector 0
    [ 125.491960] ata1.00: device reported invalid CHS sector 0
    [ 125.491962] ata1.00: device reported invalid CHS sector 0
    [ 125.491963] ata1.00: device reported invalid CHS sector 0
    [ 125.491965] ata1.00: device reported invalid CHS sector 0
    [ 125.491967] ata1.00: device reported invalid CHS sector 0
    [ 125.491968] ata1.00: device reported invalid CHS sector 0
    [ 125.491970] ata1.00: device reported invalid CHS sector 0
    [ 125.491972] ata1.00: device reported invalid CHS sector 0
    [ 125.491973] ata1.00: device reported invalid CHS sector 0
    [ 125.491975] ata1.00: device reported invalid CHS sector 0
    [ 125.491977] ata1.00: device reported invalid CHS sector 0
    [ 125.491985] sd 0:0:0:0: [sda]
    [ 125.491987] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.491989] sd 0:0:0:0: [sda]
    [ 125.491990] Sense Key : 0xb [current] [descriptor]
    [ 125.491993] Descriptor sense data with sense descriptors (in hex):
    [ 125.491995] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.492003] 00 00 00 00
    [ 125.492006] sd 0:0:0:0: [sda]
    [ 125.492007] ASC=0x0 ASCQ=0x0
    [ 125.492009] sd 0:0:0:0: [sda] CDB:
    [ 125.492011] cdb[0]=0x28: 28 00 00 c0 02 3f 00 00 08 00
    [ 125.492018] end_request: I/O error, dev sda, sector 12583487
    [ 125.525741] sd 0:0:0:0: [sda]
    [ 125.525743] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.525745] sd 0:0:0:0: [sda]
    [ 125.525746] Sense Key : 0xb [current] [descriptor]
    [ 125.525748] Descriptor sense data with sense descriptors (in hex):
    [ 125.525749] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.525757] 00 00 00 00
    [ 125.525761] sd 0:0:0:0: [sda]
    [ 125.525762] ASC=0x0 ASCQ=0x0
    [ 125.525764] sd 0:0:0:0: [sda] CDB:
    [ 125.525765] cdb[0]=0x28: 28 00 00 c0 01 e7 00 00 08 00
    [ 125.525771] end_request: I/O error, dev sda, sector 12583399
    [ 125.559049] sd 0:0:0:0: [sda]
    [ 125.559050] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.559051] sd 0:0:0:0: [sda]
    [ 125.559052] Sense Key : 0xb [current] [descriptor]
    [ 125.559054] Descriptor sense data with sense descriptors (in hex):
    [ 125.559055] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.559062] 00 00 00 00
    [ 125.559065] sd 0:0:0:0: [sda]
    [ 125.559066] ASC=0x0 ASCQ=0x0
    [ 125.559067] sd 0:0:0:0: [sda] CDB:
    [ 125.559068] cdb[0]=0x28: 28 00 00 c0 01 ef 00 00 08 00
    [ 125.559074] end_request: I/O error, dev sda, sector 12583407
    [ 125.591752] sd 0:0:0:0: [sda]
    [ 125.591753] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.591754] sd 0:0:0:0: [sda]
    [ 125.591755] Sense Key : 0xb [current] [descriptor]
    [ 125.591756] Descriptor sense data with sense descriptors (in hex):
    [ 125.591757] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.591762] 00 00 00 00
    [ 125.591765] sd 0:0:0:0: [sda]
    [ 125.591765] ASC=0x0 ASCQ=0x0
    [ 125.591766] sd 0:0:0:0: [sda] CDB:
    [ 125.591767] cdb[0]=0x28: 28 00 00 c0 01 f7 00 00 08 00
    [ 125.591771] end_request: I/O error, dev sda, sector 12583415
    [ 125.624366] sd 0:0:0:0: [sda]
    [ 125.624368] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.624369] sd 0:0:0:0: [sda]
    [ 125.624370] Sense Key : 0xb [current] [descriptor]
    [ 125.624372] Descriptor sense data with sense descriptors (in hex):
    [ 125.624373] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.624379] 00 00 00 00
    [ 125.624383] sd 0:0:0:0: [sda]
    [ 125.624384] ASC=0x0 ASCQ=0x0
    [ 125.624385] sd 0:0:0:0: [sda] CDB:
    [ 125.624386] cdb[0]=0x28: 28 00 00 c0 01 ff 00 00 08 00
    [ 125.624391] end_request: I/O error, dev sda, sector 12583423
    [ 125.656331] sd 0:0:0:0: [sda]
    [ 125.656332] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.656334] sd 0:0:0:0: [sda]
    [ 125.656335] Sense Key : 0xb [current] [descriptor]
    [ 125.656336] Descriptor sense data with sense descriptors (in hex):
    [ 125.656337] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.656344] 00 00 00 00
    [ 125.656347] sd 0:0:0:0: [sda]
    [ 125.656348] ASC=0x0 ASCQ=0x0
    [ 125.656350] sd 0:0:0:0: [sda] CDB:
    [ 125.656351] cdb[0]=0x28: 28 00 00 c0 02 07 00 00 08 00
    [ 125.656356] end_request: I/O error, dev sda, sector 12583431
    [ 125.687903] sd 0:0:0:0: [sda]
    [ 125.687904] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.687905] sd 0:0:0:0: [sda]
    [ 125.687906] Sense Key : 0xb [current] [descriptor]
    [ 125.687907] Descriptor sense data with sense descriptors (in hex):
    [ 125.687908] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.687913] 00 00 00 00
    [ 125.687916] sd 0:0:0:0: [sda]
    [ 125.687916] ASC=0x0 ASCQ=0x0
    [ 125.687917] sd 0:0:0:0: [sda] CDB:
    [ 125.687918] cdb[0]=0x28: 28 00 00 c0 02 0f 00 00 08 00
    [ 125.687922] end_request: I/O error, dev sda, sector 12583439
    [ 125.718974] sd 0:0:0:0: [sda]
    [ 125.718975] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.718976] sd 0:0:0:0: [sda]
    [ 125.718977] Sense Key : 0xb [current] [descriptor]
    [ 125.718978] Descriptor sense data with sense descriptors (in hex):
    [ 125.718979] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.718983] 00 00 00 00
    [ 125.718986] sd 0:0:0:0: [sda]
    [ 125.718986] ASC=0x0 ASCQ=0x0
    [ 125.718987] sd 0:0:0:0: [sda] CDB:
    [ 125.718988] cdb[0]=0x28: 28 00 00 c0 02 17 00 00 08 00
    [ 125.718992] end_request: I/O error, dev sda, sector 12583447
    [ 125.749811] sd 0:0:0:0: [sda]
    [ 125.749812] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.749813] sd 0:0:0:0: [sda]
    [ 125.749813] Sense Key : 0xb [current] [descriptor]
    [ 125.749815] Descriptor sense data with sense descriptors (in hex):
    [ 125.749815] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.749820] 00 00 00 00
    [ 125.749823] sd 0:0:0:0: [sda]
    [ 125.749823] ASC=0x0 ASCQ=0x0
    [ 125.749825] sd 0:0:0:0: [sda] CDB:
    [ 125.749825] cdb[0]=0x28: 28 00 00 c0 02 1f 00 00 08 00
    [ 125.749829] end_request: I/O error, dev sda, sector 12583455
    [ 125.780191] sd 0:0:0:0: [sda]
    [ 125.780192] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.780194] sd 0:0:0:0: [sda]
    [ 125.780195] Sense Key : 0xb [current] [descriptor]
    [ 125.780196] Descriptor sense data with sense descriptors (in hex):
    [ 125.780198] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.780204] 00 00 00 00
    [ 125.780207] sd 0:0:0:0: [sda]
    [ 125.780208] ASC=0x0 ASCQ=0x0
    [ 125.780210] sd 0:0:0:0: [sda] CDB:
    [ 125.780211] cdb[0]=0x28: 28 00 00 c0 02 27 00 00 08 00
    [ 125.780216] end_request: I/O error, dev sda, sector 12583463
    [ 125.810208] sd 0:0:0:0: [sda]
    [ 125.810210] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.810211] sd 0:0:0:0: [sda]
    [ 125.810212] Sense Key : 0xb [current] [descriptor]
    [ 125.810214] Descriptor sense data with sense descriptors (in hex):
    [ 125.810215] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.810223] 00 00 00 00
    [ 125.810226] sd 0:0:0:0: [sda]
    [ 125.810227] ASC=0x0 ASCQ=0x0
    [ 125.810229] sd 0:0:0:0: [sda] CDB:
    [ 125.810230] cdb[0]=0x28: 28 00 00 c0 02 2f 00 00 08 00
    [ 125.810239] sd 0:0:0:0: [sda]
    [ 125.810240] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.810242] sd 0:0:0:0: [sda]
    [ 125.810243] Sense Key : 0xb [current] [descriptor]
    [ 125.810245] Descriptor sense data with sense descriptors (in hex):
    [ 125.810246] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.810253] 00 00 00 00
    [ 125.810257] sd 0:0:0:0: [sda]
    [ 125.810258] ASC=0x0 ASCQ=0x0
    [ 125.810260] sd 0:0:0:0: [sda] CDB:
    [ 125.810261] cdb[0]=0x28: 28 00 00 c0 02 37 00 00 08 00
    [ 125.810273] ata1: EH complete
    [ 125.855545] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 125.855767] systemd[1]: No hostname configured.
    [ 125.855774] systemd[1]: Set hostname to <localhost>.
    [ 125.896662] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 125.896723] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 125.896736] systemd[1]: Starting Login Prompts.
    [ 125.896747] systemd[1]: Reached target Login Prompts.
    [ 125.896757] systemd[1]: Expecting device sys-subsystem-net-devices-wlp1s0.device...
    [ 125.896765] systemd[1]: Starting Remote File Systems.
    [ 125.896773] systemd[1]: Reached target Remote File Systems.
    [ 125.896780] systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device...
    [ 125.896788] systemd[1]: Expecting device sys-subsystem-net-devices-wlp0s20u2.device...
    [ 125.896796] systemd[1]: Expecting device sys-subsystem-net-devices-interface_name.device...
    [ 125.896805] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 125.896826] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 125.896834] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 125.896859] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 125.896867] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 125.896891] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 125.896898] systemd[1]: Starting Delayed Shutdown Socket.
    [ 125.896925] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 125.896950] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 125.897038] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 125.897049] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 125.897076] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 125.897084] systemd[1]: Starting Paths.
    [ 125.897091] systemd[1]: Reached target Paths.
    [ 125.897099] systemd[1]: Starting Encrypted Volumes.
    [ 125.897106] systemd[1]: Reached target Encrypted Volumes.
    [ 125.897114] systemd[1]: Starting Journal Socket.
    [ 125.897152] systemd[1]: Listening on Journal Socket.
    [ 125.897605] systemd[1]: Starting Apply Kernel Variables...
    [ 125.898095] systemd[1]: Mounting Huge Pages File System...
    [ 125.899047] systemd[1]: Started Load Kernel Modules.
    [ 125.901395] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 125.902589] systemd[1]: Started Set Up Additional Binary Formats.
    [ 125.902620] systemd[1]: Mounted FUSE Control File System.
    [ 125.902640] systemd[1]: Mounting Debug File System...
    [ 125.903016] systemd[1]: Starting Setup Virtual Console...
    [ 125.903358] systemd[1]: Mounting Configuration File System...
    [ 125.903640] systemd[1]: Mounting POSIX Message Queue File System...
    [ 125.903921] systemd[1]: Starting Journal Service...
    [ 125.904299] systemd[1]: Started Journal Service.
    [ 125.916845] EXT4-fs (sda1): re-mounted. Opts: data=ordered
    [ 125.919072] systemd-journald[122]: Vacuuming done, freed 0 bytes
    [ 125.959065] systemd-udevd[146]: starting version 208
    [ 126.006669] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 126.007045] ACPI: Requesting acpi_cpufreq
    [ 126.011801] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
    [ 126.011809] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 126.011813] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20130725/utaddress-251)
    [ 126.011817] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20130725/utaddress-251)
    [ 126.011821] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 126.011823] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20130725/utaddress-251)
    [ 126.011826] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20130725/utaddress-251)
    [ 126.011829] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 126.011831] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 126.016043] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 126.017806] mei_me 0000:00:16.0: setting latency timer to 64
    [ 126.017844] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
    [ 126.018168] ACPI: AC Adapter [ADP1] (on-line)
    [ 126.018533] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input7
    [ 126.018749] ACPI: Lid Switch [LID0]
    [ 126.024617] [drm] Initialized drm 1.1.0 20060810
    [ 126.025670] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input8
    [ 126.025678] ACPI: Power Button [PWRB]
    [ 126.027618] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
    [ 126.027625] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 126.029104] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
    [ 126.039570] sony_laptop: Sony Notebook Control Driver v0.6
    [ 126.040271] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input9
    [ 126.040323] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input10
    [ 126.052679] sony_laptop: brightness ignored, must be controlled by ACPI video driver
    [ 126.053949] mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
    [ 126.057104] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
    [ 126.061557] cfg80211: Calling CRDA to update world regulatory domain
    [ 126.063932] [drm] Memory usable by graphics device = 2048M
    [ 126.063939] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
    [ 126.063941] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 126.063958] Console: switching to colour dummy device 80x25
    [ 126.064087] i915 0000:00:02.0: setting latency timer to 64
    [ 126.065272] Bluetooth: Core ver 2.16
    [ 126.065288] NET: Registered protocol family 31
    [ 126.065290] Bluetooth: HCI device and connection manager initialized
    [ 126.065297] Bluetooth: HCI socket layer initialized
    [ 126.065300] Bluetooth: L2CAP socket layer initialized
    [ 126.065306] Bluetooth: SCO socket layer initialized
    [ 126.066200] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 126.066203] Copyright(c) 2003-2013 Intel Corporation
    [ 126.066234] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
    [ 126.066379] iwlwifi 0000:01:00.0: irq 60 for MSI/MSI-X
    [ 126.066611] media: Linux media interface: v0.10
    [ 126.070972] Linux video capture interface: v2.00
    [ 126.071925] usbcore: registered new interface driver btusb
    [ 126.072283] iwlwifi 0000:01:00.0: loaded firmware version 22.1.7.0 op_mode iwlmvm
    [ 126.079665] uvcvideo: Found UVC 1.00 device USB Webcam (0bda:5727)
    [ 126.086285] Bluetooth: hci0: read Intel version: 370710018002030d33
    [ 126.086289] Bluetooth: hci0: Intel device is already patched. patch num: 33
    [ 126.086708] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
    [ 126.086756] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
    [ 126.086898] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
    [ 126.092008] input: USB Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input12
    [ 126.092641] usbcore: registered new interface driver uvcvideo
    [ 126.092643] USB Video Class driver (1.1.1)
    [ 126.097370] rtl8192cu: Chip version 0x10
    [ 126.099239] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x10
    [ 126.101863] i915 0000:00:02.0: irq 61 for MSI/MSI-X
    [ 126.101873] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 126.101874] [drm] Driver supports precise vblank timestamp query.
    [ 126.101936] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 126.103517] ACPI: Battery Slot [BAT0] (battery present)
    [ 126.106435] thermal LNXTHERM:00: registered as thermal_zone0
    [ 126.106438] ACPI: Thermal Zone [TZ00] (44 C)
    [ 126.113114] ACPI: Battery Slot [BAT1] (battery absent)
    [ 126.116315] iTCO_vendor_support: vendor-support=0
    [ 126.116847] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 126.116874] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
    [ 126.116974] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 126.126547] nfc: nfc_init: NFC Core ver 0.1
    [ 126.126568] NET: Registered protocol family 39
    [ 126.129879] Probing NFC pn544
    [ 126.140325] rtl8192cu: MAC address: 48:02:2a:7e:a6:e6
    [ 126.140330] rtl8192cu: Board Type 0
    [ 126.140406] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
    [ 126.140468] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin
    [ 126.140647] usbcore: registered new interface driver rtl8192cu
    [ 126.141022] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x10
    [ 126.143777] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x10
    [ 126.145297] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x10
    [ 126.145956] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 126.146279] ieee80211 phy1: Selected rate control algorithm 'rtl_rc'
    [ 126.146546] rtlwifi: wireless switch is on
    [ 126.155037] Adding 4883756k swap on /dev/sda2. Priority:-1 extents:1 across:4883756k SSFS
    [ 126.157369] systemd-udevd[150]: renamed network interface wlan0 to wlp0s20u2
    [ 126.172432] fbcon: inteldrmfb (fb0) is primary device
    [ 126.174020] kvm: disabled by bios
    [ 126.191698] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 126.296157] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
    [ 126.316113] systemd-udevd[149]: renamed network interface wlan0 to wlp1s0
    [ 126.496564] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800, board id: 2699, fw id: 1401224
    [ 126.530856] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input13
    [ 127.272221] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 128.108351] Console: switching to colour frame buffer device 240x67
    [ 128.113031] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 128.113032] i915 0000:00:02.0: registered panic notifier
    [ 128.118797] systemd-journald[122]: Received request to flush runtime journal from PID 1
    [ 128.131283] rtl8192cu: MAC auto ON okay!
    [ 128.133182] acpi device:29: registered as cooling_device4
    [ 128.133807] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 128.133865] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input14
    [ 128.133967] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 128.134326] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
    [ 128.142523] rtl8192cu: Tx queue select: 0x05
    [ 128.190200] hda_codec: invalid CONNECT_LIST verb 5[1]:0
    [ 128.190258] hda_codec: invalid CONNECT_LIST verb 6[1]:0
    [ 128.190324] hda_codec: invalid CONNECT_LIST verb 7[1]:0
    [ 128.191848] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
    [ 128.191965] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
    [ 128.192061] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
    [ 128.491245] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u2: link is not ready
    [ 128.491384] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
    [ 128.491528] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
    [ 128.502620] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
    [ 129.387913] wlp0s20u2: authenticate with 60:33:4b:e3:fe:31
    [ 129.409908] wlp0s20u2: send auth to 60:33:4b:e3:fe:31 (try 1/3)
    [ 129.415420] wlp0s20u2: authenticated
    [ 129.417546] wlp0s20u2: associate with 60:33:4b:e3:fe:31 (try 1/3)
    [ 129.426949] wlp0s20u2: RX AssocResp from 60:33:4b:e3:fe:31 (capab=0x1421 status=0 aid=3)
    [ 129.426980] wlp0s20u2: associated
    [ 129.427017] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20u2: link becomes ready
    [ 132.215759] wlp1s0: authenticate with 28:c6:8e:38:76:40
    [ 132.216650] wlp1s0: send auth to 28:c6:8e:38:76:40 (try 1/3)
    [ 132.218773] wlp1s0: authenticated
    [ 132.219328] wlp1s0: associate with 28:c6:8e:38:76:40 (try 1/3)
    [ 132.223547] wlp1s0: RX AssocResp from 28:c6:8e:38:76:40 (capab=0x411 status=0 aid=2)
    [ 132.226025] wlp1s0: associated
    [ 132.226065] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
    [ 258.046843] fuse init (API version 7.22)
    [ 378.299290] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
    [ 383.308507] PM: Syncing filesystems ... done.
    [ 383.316136] PM: Preparing system for mem sleep
    [ 383.316489] Freezing user space processes ... (elapsed 0.001 seconds) done.
    [ 383.318093] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
    [ 383.319198] PM: Entering mem sleep
    [ 383.319988] Suspending console(s) (use no_console_suspend to debug)
    [ 383.320296] wlp1s0: deauthenticating from 28:c6:8e:38:76:40 by local choice (reason=3)
    [ 383.363765] wlp0s20u2: deauthenticating from 60:33:4b:e3:fe:31 by local choice (reason=3)
    [ 383.410660] cfg80211: Calling CRDA for country: US
    [ 383.410789] sd 0:0:0:0: [sda] Synchronizing SCSI cache
    [ 383.411362] sd 0:0:0:0: [sda] Stopping disk
    [ 383.446489] mei_me 0000:00:16.0: suspend
    [ 383.446519] Removing pn544
    [ 383.672813] PM: suspend of devices complete after 352.743 msecs
    [ 383.672995] PM: late suspend of devices complete after 0.180 msecs
    [ 383.686193] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
    [ 383.712750] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
    [ 383.726404] PM: noirq suspend of devices complete after 53.436 msecs
    [ 383.726772] ACPI: Preparing to enter system sleep state S3
    [ 383.727125] PM: Saving platform NVS memory
    [ 383.738495] Disabling non-boot CPUs ...
    [ 383.740019] smpboot: CPU 1 is now offline
    [ 383.842641] smpboot: CPU 2 is now offline
    [ 383.945915] smpboot: CPU 3 is now offline
    [ 383.947636] ACPI: Low-level resume complete
    [ 383.947694] PM: Restoring platform NVS memory
    [ 383.950388] Enabling non-boot CPUs ...
    [ 383.950428] smpboot: Booting Node 0 Processor 1 APIC 0x2
    [ 383.964791] Intel pstate controlling: cpu 1
    [ 383.964841] CPU1 is up
    [ 383.964859] smpboot: Booting Node 0 Processor 2 APIC 0x1
    [ 383.979205] Intel pstate controlling: cpu 2
    [ 383.979242] CPU2 is up
    [ 383.979256] smpboot: Booting Node 0 Processor 3 APIC 0x3
    [ 383.993602] Intel pstate controlling: cpu 3
    [ 383.993638] CPU3 is up
    [ 384.000372] ACPI: Waking up from system sleep state S3
    [ 384.040063] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
    [ 384.080048] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 384.106810] PM: noirq resume of devices complete after 105.593 msecs
    [ 384.106933] PM: early resume of devices complete after 0.104 msecs
    [ 384.106955] i915 0000:00:02.0: setting latency timer to 64
    [ 384.106964] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 384.107040] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
    [ 384.107043] snd_hda_intel 0000:00:03.0: irq 59 for MSI/MSI-X
    [ 384.107191] snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
    [ 384.107217] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 384.143506] mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
    [ 384.143557] Probing NFC pn544
    [ 384.446544] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 384.451776] ata1.00: c

    The first thing to do is use smartctl to test the drive. Start with the short test ( smartctl -t short /dev/sdX ), and if it passes run the long test ( ... -t long ... ).

  • Error while starting ABAP trial version system

    Hello Friends,
             I am getting the following error while starting thesystem.Please help me in solving the problem. I have seen this problem has happened for many people. Points rewarded for helpfull answers.
    error for dev_disp:
    kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
    length of sys_adm_ext is 360 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 4072) [dpxxdisp.c   1239]
         shared lib "dw_xml.dll" version 95 successfully loaded
         shared lib "dw_xtc.dll" version 95 successfully loaded
         shared lib "dw_stl.dll" version 95 successfully loaded
         shared lib "dw_gui.dll" version 95 successfully loaded
         shared lib "dw_mdm.dll" version 95 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    Tue Feb 05 16:11:12 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5355]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >INLD50044432A_NSP_00                    <
    DpShMCreate: sizeof(wp_adm)          6328     (904)
    DpShMCreate: sizeof(tm_adm)          3605136     (17936)
    DpShMCreate: sizeof(wp_ca_adm)          1200     (60)
    DpShMCreate: sizeof(appc_ca_adm)     1200     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    DpShMCreate: sizeof(comm_adm)          528048     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1280)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 04E60040, size: 4205552)
    DpShMCreate: allocated sys_adm at 04E60040
    DpShMCreate: allocated wp_adm at 04E61A28
    DpShMCreate: allocated tm_adm_list at 04E632E0
    DpShMCreate: allocated tm_adm at 04E63310
    DpShMCreate: allocated wp_ca_adm at 051D35A0
    DpShMCreate: allocated appc_ca_adm at 051D3A50
    DpShMCreate: allocated comm_adm at 051D3F00
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 05254DB0
    DpShMCreate: allocated gw_adm at 05254DF0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 05254E20
    DpShMCreate: allocated wall_adm at 05254E28
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    Tue Feb 05 16:11:13 2008
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Memory Reset disabled as NT default
    <ES> 127 blocks reserved for free list.
    ES initialized.
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( INLD50044432A) [dpxxdisp.c   11663]
    Tue Feb 05 16:11:14 2008
    DpStartStopMsg: send start message (myname is >INLD50044432A_NSP_00                    <)
    DpStartStopMsg: start msg sent
    CCMS: alert/MONI_SEGM_SIZE = 0   monitoring and alerting switched off.
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 95
    Release check o.K.
    Tue Feb 05 16:11:54 2008
    ERROR => W0 (pid 2280) died [dpxxdisp.c   14318]
    ERROR => W1 (pid 2088) died [dpxxdisp.c   14318]
    ERROR => W2 (pid 1504) died [dpxxdisp.c   14318]
    my types changed after wp death/restart 0x9f --> 0x9e
    ERROR => W3 (pid 3396) died [dpxxdisp.c   14318]
    my types changed after wp death/restart 0x9e --> 0x9c
    ERROR => W4 (pid 2328) died [dpxxdisp.c   14318]
    my types changed after wp death/restart 0x9c --> 0x98
    ERROR => W5 (pid 3316) died [dpxxdisp.c   14318]
    my types changed after wp death/restart 0x98 --> 0x90
    ERROR => W6 (pid 3776) died [dpxxdisp.c   14318]
    my types changed after wp death/restart 0x90 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1677
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    error from dev_w0
    C  Try to connect (DEFAULT) on connection 0 ...
    C  *** ERROR => Connect to database failed, rc = -10757 (XUSER error (the USERKEY is unknown))
    [dbsdbsql.cpp 112]
    C  Try to connect (SQLOPT) on connection 0 ...
    C  *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
    [dbsdbsql.cpp 136]
    B  ***LOG BV3=> severe db error -10709    ; work process is stopped [dbsh#2 @ 1199] [dbsh    1199 ]
    B  ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1426]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10240]

    M  Info for wp 0

    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = no VM

    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server INLD50044432A_NSP_00 on host INLD50044432A (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Tue Feb 05 16:11:15 2008
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10439
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************

    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 2280) [dpnttool.c   327]
    Rgds,
    Dinesh

    The application server is unable to connect to the DB because it does not have the username/password that is stored in the XUSER file. If this is a unix system, then check the home directory for sidadm to see if the .XUSER file (it might be named something like .XUSER.62) is there.
    Are you using the sidadm account to start the system?
    Thanks,
    J. Haynes
    Denver, CO US

  • Error while starting disp+work

    Hello Friends,
    I am getting the following error while starting thesystem.Please help me in solving the problem. I have seen this problem has happened for many people but no solution provided. Points rewarded for helpfull answers.
    error from dev_disp:
    kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
    length of sys_adm_ext is 360 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 4072) http://dpxxdisp.c 1239
    shared lib "dw_xml.dll" version 95 successfully loaded
    shared lib "dw_xtc.dll" version 95 successfully loaded
    shared lib "dw_stl.dll" version 95 successfully loaded
    shared lib "dw_gui.dll" version 95 successfully loaded
    shared lib "dw_mdm.dll" version 95 successfully loaded
    rdisp/softcancel_sequence : -> 0,5,-1
    use internal message server connection to port 3900
    Tue Feb 05 16:11:12 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings http://dpxxtool2.c 5355
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >INLD50044432A_NSP_00 <
    DpShMCreate: sizeof(wp_adm) 6328 (904)
    DpShMCreate: sizeof(tm_adm) 3605136 (17936)
    DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
    DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    DpShMCreate: sizeof(comm_adm) 528048 (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm) 0 (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm) 0 (72)
    DpShMCreate: sizeof(vmc_adm) 0 (1280)
    DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
    DpShMCreate: sizeof(gw_adm) 48
    DpShMCreate: SHM_DP_ADM_KEY (addr: 04E60040, size: 4205552)
    DpShMCreate: allocated sys_adm at 04E60040
    DpShMCreate: allocated wp_adm at 04E61A28
    DpShMCreate: allocated tm_adm_list at 04E632E0
    DpShMCreate: allocated tm_adm at 04E63310
    DpShMCreate: allocated wp_ca_adm at 051D35A0
    DpShMCreate: allocated appc_ca_adm at 051D3A50
    DpShMCreate: allocated comm_adm at 051D3F00
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 05254DB0
    DpShMCreate: allocated gw_adm at 05254DF0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 05254E20
    DpShMCreate: allocated wall_adm at 05254E28
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    Tue Feb 05 16:11:13 2008
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Memory Reset disabled as NT default
    <ES> 127 blocks reserved for free list.
    ES initialized.
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( INLD50044432A) http://dpxxdisp.c 11663
    Tue Feb 05 16:11:14 2008
    DpStartStopMsg: send start message (myname is >INLD50044432A_NSP_00 <)
    DpStartStopMsg: start msg sent
    CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet http://dpxxmbuf.c 1050
    DpMsgAdmin: Set patchno for this platform to 95
    Release check o.K.
    Tue Feb 05 16:11:54 2008
    ERROR => W0 (pid 2280) died http://dpxxdisp.c 14318
    ERROR => W1 (pid 2088) died http://dpxxdisp.c 14318
    ERROR => W2 (pid 1504) died http://dpxxdisp.c 14318
    my types changed after wp death/restart 0x9f --> 0x9e
    ERROR => W3 (pid 3396) died http://dpxxdisp.c 14318
    my types changed after wp death/restart 0x9e --> 0x9c
    ERROR => W4 (pid 2328) died http://dpxxdisp.c 14318
    my types changed after wp death/restart 0x9c --> 0x98
    ERROR => W5 (pid 3316) died http://dpxxdisp.c 14318
    my types changed after wp death/restart 0x98 --> 0x90
    ERROR => W6 (pid 3776) died http://dpxxdisp.c 14318
    my types changed after wp death/restart 0x90 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1677
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    error from dev_w0
    C Try to connect (DEFAULT) on connection 0 ...
    C *** ERROR => Connect to database failed, rc = -10757 (XUSER error (the USERKEY is unknown))
    http://dbsdbsql.cpp 112
    C Try to connect (SQLOPT) on connection 0 ...
    C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
    http://dbsdbsql.cpp 136
    B ***LOG BV3=> severe db error -10709 ; work process is stopped dbsh#2 @ 1199 dbsh 1199
    B ***LOG BY2=> sql error -10709 performing CON dblink#3 @ 431 dblink 0431
    B ***LOG BY0=> Connection failed (RTE:Database name is missing) dblink#3 @ 431 dblink 0431
    M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) http://thxxhead.c 1426
    M in_ThErrHandle: 1
    M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) http://thxxhead.c 10240
    M
    M Info for wp 0
    M
    M stat = WP_RUN
    M waiting_for = NO_WAITING
    M reqtype = DP_RQ_DIAWP
    M act_reqtype = NO_REQTYPE
    M rq_info = 0
    M tid = -1
    M mode = 255
    M len = -1
    M rq_id = 65535
    M rq_source =
    M last_tid = 0
    M last_mode = 0
    M semaphore = 0
    M act_cs_count = 0
    M csTrack = 0
    M csTrackRwExcl = 0
    M csTrackRwShrd = 0
    M control_flag = 0
    M int_checked_resource(RFC) = 0
    M ext_checked_resource(RFC) = 0
    M int_checked_resource(HTTP) = 0
    M ext_checked_resource(HTTP) = 0
    M report = > <
    M action = 0
    M tab_name = > <
    M vm = no VM
    M
    M *****************************************************************************
    M *
    M * LOCATION SAP-Server INLD50044432A_NSP_00 on host INLD50044432A (wp 0)
    M * ERROR ThInit: db_connect
    M *
    M * TIME Tue Feb 05 16:11:15 2008
    M * RELEASE 700
    M * COMPONENT Taskhandler
    M * VERSION 1
    M * RC 13
    M * MODULE thxxhead.c
    M * LINE 10439
    M * COUNTER 1
    M *
    M *****************************************************************************
    M
    M PfStatDisconnect: disconnect statistics
    M Entering TH_CALLHOOKS
    M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm http://thxxrun1.c 720
    M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed http://thxxtool3.c 260
    M Entering ThSetStatError
    M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M Entering ThReadDetachMode
    M call ThrShutDown (1)...
    M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2280) http://dpnttool.c 327
    Rgds,
    Dinesh

    Hi Bidwan,
            I tried executing the command for XUSER, Executed successfully. Still i am getting the same error..
    Error logs for dev_w0
    M  calling db_connect ...

    C  DBSDBSLIB : version 700.08, patch 0.095 (Make PL 0.95)
    C  MAXDB shared library (dbsdbslib) patchlevels (last 10)
    C    (0.095) MaxDB DBSL patch collection 1 2007 (note 1014270)
    C    (0.082) MaxDB DBSL patch collection 3 2006 (note 991258)
    C    (0.079) MaxDB DBSL patch collection 2 2006 (note 984406)
    C    (0.068) MaxDB DBSL patch collection 1 2006 (note 962708)
    C    (0.051) DB50 perm block defect (note 934194)
    C    (0.046) ADBC: invalid data when fetching cursor with hold (note 925337)
    C    (0.045) Signal 11 during creation of BIA index (note 920743)
    C    (0.038) MaxDB DBSL patch collection 2 2005 (note 908602)
    C    (0.034) Livecache unicode connect (use SDK 7.6.0 b11) (note 901576)
    C    (0.028) Disable LVC codepage checking (note 882788)


    C  Loading SQLDBC client runtime ...
    C  SQLDBC SDK Version : SQLDBC.H  7.6.0    BUILD 002-121-083-965
    C  SQLDBC Library Version : libSQLDBC 7.6.2    BUILD 014-123-152-175
    C  SQLDBC client runtime is MaxDB 7.6.2.014 CL 152175
    C  SQLDBC supports new DECIMAL interface : 0
    C  SQLDBC supports VARIABLE INPUT data : 1
    C  INFO : SQLOPT= -I 0 -t 0 -S SAPR3
    C  Try to connect (DEFAULT) on connection 0 ...
    C  *** ERROR => Connect to database failed, rc = -10757 (XUSER error (the USERKEY is unknown))
    [dbsdbsql.cpp 112]
    C  Try to connect (SQLOPT) on connection 0 ...
    C  *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
    [dbsdbsql.cpp 136]
    B  ***LOG BV3=> severe db error -10709    ; work process is stopped [dbsh#2 @ 1199] [dbsh    1199 ]
    B  ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1426]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10240]
    I would like to mention that no SIDadm user has been created in windows user account. But installation was successfull
    Rgds,
    Dinesh

  • Error while starting

    hello
    i am using bea webserver 5.1 with java. evert time i run the cmd file in the weblogic
    installation directory a few set of errors shows up eventhough these errors does
    not make any problem to the server frm booting up
    the errors are
    1: java.lang.Exception: Problem with X509 certificate: fingerprint = f1c530f7211410a2220c7e9d3152b496
    2: <E> <SSLListenThread> Security Configuration Problem with SSL certificate authority
    file (c:/weblogic\myserver\ca.pem)
    these error will be there when i run the cmd file.
    the second problem is i want to run the welogic server from with in a java program.
    it is a java application and on the action performed event i starts a process
    theread by getting the runtime. and run it using the exec. the string i give inside
    the exec is
    "java -ms64m -mx64m -classpath c:/weblogic/classes/boot -Dweblogic.system.home=C:/weblogic
    -Dweblogic.class.path=c:/weblogic/classes;c:/weblogic/license;c:/weblogic/lib/weblogicaux.jar;c:/weblogic/myserver/serverclasses
    -Djava.security.manager -Djava.security.policy==c:/weblogic/weblogic.policy weblogic.Server"
    even though i give this line in the command prompt the server is started but if
    u run it with in a program it stops in the half way the last information shown
    by the server is
    Thu Sep 18 15:53:37 IST 2003:<I> <WebLogicServer> NamingContextImpl exported as
    <IOR:000000000000002849444c3a6f6d672e6f72672f436f734e616d696e672f4e616d696e67436f6e746578743a312e3000000000010000000000000066000101000000000a6c6f63616c686f7374001b590000003800424541000000000000002849444c3a6f6d672e6f72672f436f734e616d696e672f4e616d696e67436f6e746578743a312e30000000000800000001000000000000000a00000000000000000000>
    java.lang.Exception: Problem with X509 certificate: fingerprint = f1c530f7211410a2220c7e9d3152b496
    hope any else is having the same problem hope someone can help me in this. thanking
    you narendran

    Hello,
    The prerequisite for this error is a problem with the acceptance of a new network connection (for example, by a SAPGUI).
    This function fails for example, if not enough file-handles are available for the process:
    After this error occurs, the dispatcher has to close and reopen its listen-socket. If the dispatcher cannot connect to the port (sapdpXX), this is viewed as fatal and the application shuts down.
    Because of inherited sockets on the workprocess, the dispatcher reconnect fails and the application server shuts down
    So check u r MMC for yello light for further diagnosis..
    Thanks
    give reward points for the same

  • "Not an executable or is a link" errors when starting Messaging Server

    "Not an executable or is a link" errors when starting Messaging Server
    <P>
    If Calendar Server 3.x has been installed to the same server root
    as Messaging server, it is possible that the command 'NscpMail start'
    to restart the server will return a string of errors:
    # /etc/NscpMail start
    19971207145610:Dispatch:Notification:Local Module
    (Account-Handler) is not a n executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Account-Manager) is not a n executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (AutoReply-Handler) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Configuration-Manager) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Error-Handler) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Mailbox-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Program-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (SMTP-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (SMTP-Router) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (UNIX-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (Finger-Server) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (IMAP4-Server) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (POP3-Server) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (SMTP-Accept) is not an executable or is a link.
    Module not loaded.
    Startup Problem:
    Module Error-Handler is required for proper operation.
    Netscape Messaging Server Exiting!
    The Calendar server 3.x installation may have changed the permissions
    on [server-root]/bin directory from 755 to 750. Simply issue the
    command (as root) 'chmod 755 [server-root]/bin' and then start
    the server with the 'NscpMail start' command, and it should start
    without a problem.

    "Not an executable or is a link" errors when starting Messaging Server
    <P>
    If Calendar Server 3.x has been installed to the same server root
    as Messaging server, it is possible that the command 'NscpMail start'
    to restart the server will return a string of errors:
    # /etc/NscpMail start
    19971207145610:Dispatch:Notification:Local Module
    (Account-Handler) is not a n executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Account-Manager) is not a n executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (AutoReply-Handler) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Configuration-Manager) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Error-Handler) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Mailbox-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (Program-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (SMTP-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (SMTP-Router) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Local Module
    (UNIX-Deliver) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (Finger-Server) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (IMAP4-Server) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (POP3-Server) is not an executable or is a link.
    Module not loaded.
    19971207145610:Dispatch:Notification:Network Module
    (SMTP-Accept) is not an executable or is a link.
    Module not loaded.
    Startup Problem:
    Module Error-Handler is required for proper operation.
    Netscape Messaging Server Exiting!
    The Calendar server 3.x installation may have changed the permissions
    on [server-root]/bin directory from 755 to 750. Simply issue the
    command (as root) 'chmod 755 [server-root]/bin' and then start
    the server with the 'NscpMail start' command, and it should start
    without a problem.

  • Errors when starting tomcat5.5

    Errors when starting tomcat5.5
    I found below errors message when starting tomcat5.5 every time, does anyone know what cause it?
    Thanks in advance.
    JDK 1.5.0 & Struts 1.2 were installed on my machine, running on win XP home edition.
    validation.xml file is here:
    <?xml version="1.0" encoding="iso-8859-1"?>
    <!DOCTYPE form-validation PUBLIC
              "-//Apache Software Foundation//DTD Commons Validator Rules Configuration 1.1.3//EN"
              "http://jakarta.apache.org/commons/dtds/validator_1_1_3.dtd">
    <form-validation>
         <formset>            
              <form name="loginFormBean">
                     <field property="userId" depends="required">
                       <msg name="required" key="loginFormBean.error.userId.missing"/>     
                     </field> 
                     <field property="password" depends="required">
                       <msg name="required" key="loginFormBean.error.password.missing"/>     
                     </field> 
              </form>       
         </formset>  
    </form-validation>
    Error message:
    INFO: Loading validation rules file from '/WEB-INF/validation.xml'
    Nov 18, 2005 9:26:37 AM org.apache.commons.digester.Digester error
    SEVERE: Parse Error at line 39 column 17: Document is invalid: no grammar found.
    org.xml.sax.SAXParseException: Document is invalid: no grammar found.
         at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(
    ErrorHandlerWrapper.java:236)
         at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(ErrorHandlerWrapper.
    java:172)
         at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.
    java:382)
         at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.
    java:316)
         at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.scanStartElement(
    XMLNSDocumentScannerImpl.java:177)
         at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl$NSContentDispatcher.
    scanRootElementHook(XMLNSDocumentScannerImpl.java:779)
         at com.sun.org.apache.xerces.internal.impl.
    XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(XMLDocumentFragmentScannerImpl.
    java:1794)
         at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(
    XMLDocumentFragmentScannerImpl.java:368)
         at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.
    java:834)
         at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.
    java:764)
         at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:148)
         at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java
    :1242)
         at org.apache.commons.digester.Digester.parse(Digester.java:1591)
         at org.apache.commons.validator.ValidatorResources.<init>(ValidatorResources.java:159)
         at org.apache.struts.validator.ValidatorPlugIn.initResources(ValidatorPlugIn.java:237)
         at org.apache.struts.validator.ValidatorPlugIn.init(ValidatorPlugIn.java:162)
         at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:869)
         at org.apache.struts.action.ActionServlet.init(ActionServlet.java:336)
         at javax.servlet.GenericServlet.init(GenericServlet.java:211)
         at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1091)
         at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:925)
         at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3857)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4118)
         at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
         at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
         at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
         at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:894)
         at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:857)
         at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:475)
         at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1102)
         at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
         at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1020)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1012)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
         at org.apache.catalina.core.StandardService.start(StandardService.java:450)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:683)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:537)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:271)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:409)
    Nov 18, 2005 9:26:37 AM org.apache.commons.digester.Digester error
    SEVERE: Parse Error at line 39 column 17: Document root element "form-validation", must match DOCTYPE
    root "null".
    org.xml.sax.SAXParseException: Document root element "form-validation", must match DOCTYPE root "
    null".
         at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(
    ErrorHandlerWrapper.java:236)
         at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(ErrorHandlerWrapper.
    java:172)
         at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.
    java:382)
         at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.
    java:316)
         at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.scanStartElement(
    XMLNSDocumentScannerImpl.java:183)
         at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl$NSContentDispatcher.
    scanRootElementHook(XMLNSDocumentScannerImpl.java:779)
         at com.sun.org.apache.xerces.internal.impl.
    XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(XMLDocumentFragmentScannerImpl.
    java:1794)
         at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(
    XMLDocumentFragmentScannerImpl.java:368)
         at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.
    java:834)
         at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.
    java:764)
         at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:148)
         at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java
    :1242)
         at org.apache.commons.digester.Digester.parse(Digester.java:1591)
         at org.apache.commons.validator.ValidatorResources.<init>(ValidatorResources.java:159)
         at org.apache.struts.validator.ValidatorPlugIn.initResources(ValidatorPlugIn.java:237)
         at org.apache.struts.validator.ValidatorPlugIn.init(ValidatorPlugIn.java:162)
         at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:869)
         at org.apache.struts.action.ActionServlet.init(ActionServlet.java:336)
         at javax.servlet.GenericServlet.init(GenericServlet.java:211)
         at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1091)
         at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:925)
         at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3857)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4118)
         at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
         at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
         at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
         at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:894)
         at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:857)
         at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:475)
         at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1102)
         at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
         at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1020)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1012)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
         at org.apache.catalina.core.StandardService.start(StandardService.java:450)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:683)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:537)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:271)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:409)

    I have not done anything myself, but our desktops do have group policy settings and software/updates do get downloaded sometimes.

  • Getting Error while starting JDeveloper - "An unexpected severe error"

    Getting Error while starting JDeveloper - "An unexpected severe error has occurred in JDeveloper".
    Its asking for exit after saving files. Below is the stack trace.
    I am using Jdeveloper 11.1.1.3, The latest version. and i installed most of the updates available in Check updates section.
    oracle.classloader.util.AnnotatedNoClassDefFoundError:
         Missing class: oracle.portlet.client.connection.web.WebProducerConnection
         Dependent class: oracle.webcenter.internal.dt.config.ConnectionContextListener
         Loader: ide-global:11.1.1.0.0
         Code-Source: /D:/oracle/Middleware2/jdeveloper/jdev/extensions/oracle.webcenter.common.jar
         Configuration: extension jar in D:\oracle\Middleware2\jdeveloper\jdev\extensions
    The missing class is not available from any code-source or loader in the system.
    o.classloader.PolicyClassLoader.handleClassNotFound(PolicyClassLoader.java:2200)
    o.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1733)
    o.classloader.PolicyClassLoader.access$000(PolicyClassLoader.java:143)
    o.classloader.PolicyClassLoader$LoadClassAction.run(PolicyClassLoader.java:331)
    j.security.AccessController.doPrivileged(Native Method)
    o.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1692)
    o.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1674)
    j.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
    o.webcenter.internal.dt.config.ConnectionContextListener.<clinit>(ConnectionContextListener.java:81)
    o.webcenter.internal.dt.addin.WebCenterFrameworkAddin$1.rescatContextRegistered(WebCenterFrameworkAddin.java:237)
    o.j.rescat2.RescatContextRegistry.notifyContextRegistered(RescatContextRegistry.java:328)
    o.j.rescat2.RescatContextRegistry.registerContext(RescatContextRegistry.java:93)
    o.adf.share.dt.AppConnContext.getRescatContext(AppConnContext.java:221)
    o.adf.share.dt.ApplicationConnectionsNode.applicationChanged(ApplicationConnectionsNode.java:94)
    o.j.appresources.ApplicationResourcesWindow.notifyApplicationChanged(ApplicationResourcesWindow.java:298)
    o.j.appresources.ApplicationResourcesNode.applicationChanged(ApplicationResourcesNode.java:66)
    o.j.appresources.ApplicationResourcesWindow.applicationChanged(ApplicationResourcesWindow.java:236)
    o.i.navigator.ApplicationNavigatorWindow.fireApplicationChangeEventImpl(ApplicationNavigatorWindow.java:990)
    o.i.navigator.ApplicationNavigatorWindow.fireApplicationChangeEvent(ApplicationNavigatorWindow.java:974)
    o.i.navigator.ApplicationNavigatorWindow.access$200(ApplicationNavigatorWindow.java:100)
    o.i.navigator.ApplicationNavigatorWindow$1L.itemStateChanged(ApplicationNavigatorWindow.java:263)
    jx.s.JComboBox.fireItemStateChanged(JComboBox.java:1205)
    jx.s.JComboBox.selectedItemChanged(JComboBox.java:1262)
    jx.s.JComboBox.contentsChanged(JComboBox.java:1309)
    jx.s.AbstractListModel.fireContentsChanged(AbstractListModel.java:100)
    jx.s.DefaultComboBoxModel.setSelectedItem(DefaultComboBoxModel.java:88)
    jx.s.JComboBox.setSelectedItem(JComboBox.java:557)
    jx.s.JComboBox.setSelectedIndex(JComboBox.java:603)
    o.i.navigator.ApplicationNavigatorWindow.initSelectedApplication(ApplicationNavigatorWindow.java:1135)
    o.i.navigator.ApplicationNavigatorWindow.initToolbarArea(ApplicationNavigatorWindow.java:1035)
    o.ideri.navigator.DefaultNavigatorWindow.initCommonItems(DefaultNavigatorWindow.java:384)
    o.i.navigator.ApplicationNavigatorWindow.getGUI(ApplicationNavigatorWindow.java:695)
    o.i.docking.DockableWindow.getHostedComponent(DockableWindow.java:231)
    o.ii.docking.TitledPanelHolder.getOrCreateComponent(TitledPanelHolder.java:47)
    o.ii.docking.TitledPanel.setPageVisible(TitledPanel.java:881)
    o.ii.docking.TitledPanel.showClient(TitledPanel.java:858)
    o.ii.docking.TitledPanel.setClientVisible(TitledPanel.java:841)
    o.ii.docking.TitledPanel.setClientVisible(TitledPanel.java:819)
    o.ii.docking.TitledPanel.loadVisibilityLayout(TitledPanel.java:1789)
    o.ii.docking.DockPanel.loadVisibilityLayout(DockPanel.java:200)
    o.ii.docking.AbstractDockPanelHost.loadVisibilityLayout(AbstractDockPanelHost.java:94)
    o.ii.docking.DockStationImpl.onStartup(DockStationImpl.java:1634)
    o.ii.docking.DockStationImpl.loadLayout(DockStationImpl.java:1473)
    o.ii.docking.DockStationListener.init(DockStationListener.java:36)
    o.i.layout.Layouts.activate(Layouts.java:812)
    o.i.layout.Layouts.activateLayout(Layouts.java:192)
    o.ii.MainWindowImpl$6.runImpl(MainWindowImpl.java:728)
    o.javatools.util.SwingClosure$1Closure.run(SwingClosure.java:50)
    j.a.event.InvocationEvent.dispatch(InvocationEvent.java:199)
    j.a.EventQueue.dispatchEvent(EventQueue.java:597)
    j.a.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
    j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
    j.a.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
    j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
    j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
    j.a.EventDispatchThread.run(EventDispatchThread.java:122)

    I did in this way.See the error message first.Try to understand the error and find out the extension name which is causing this problem.Go to tools-preferences-extensions and uncheck the respective extension and restart the jdeveloper.
    If still this problem exists,go to <jdeveloper home>\jdev\extensions,close the jdeveloper app,delete the respective extension jar file and start jdeveloper.Thanks.

  • Error while starting SQL Developer (3.1.07)

    I am using SQL Developer 3.1.07 on Windows 7.
    Today, all on a sudden it is giving me error while starting SQL Developer.
    Please help me how to fix this problem.
    The error message is:
    <code>
    java.lang.NullPointerException
         at oracle.jdevimpl.vcs.svn.SVNProfile.canActivate(SVNProfile.java:162)
         at oracle.jdevimpl.vcs.generic.GenericClient.fireCanActivate(GenericClient.java:1629)
         at oracle.jdevimpl.vcs.generic.GenericClient.canActivate(GenericClient.java:237)
         at oracle.jdevimpl.vcs.VCSManagerImpl$6.addinsLoaded(VCSManagerImpl.java:391)
         at oracle.ide.IdeCore.fireIdeEvent(IdeCore.java:864)
         at oracle.ide.IdeCore.access$100(IdeCore.java:136)
         at oracle.ide.IdeCore$3.run(IdeCore.java:836)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
    </code>

    It appears the SVN plug-in is giving you troubles, normally you should be able to disable it from
    Tools -> Preferences -> Extensions -> Versioning SupportAssuming you do not need it.
    Since your system is no longer starting you might have to manually remove the related jar file from the installation, this file is usually located in:
    [SQLDev_install_dir]/jdev/extensionsand it's name is:
    oracle.jdeveloper.subversion.jar

  • Error during start instance phase

    Dear all,
    I am getting an error during start instance phase of netweaver 7.0 installing.I am using windows server 2008 and mssql.
    The error is "instance ecd\dvebmgs00 reached state shutdown after having state starting.giving up".I searched a lot but still error
    is not solved.so please tell me how to solve this error.

    dev_disp:
    trc file: "dev_disp", trc level: 1, release: "701"
    sysno      00
    sid        ECD
    systemid   562 (PC with Windows NT)
    relno      7010
    patchlevel 0
    patchno    32
    intno      20020600
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        3228
    Mon Mar 17 11:04:13 2014
    kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
    length of sys_adm_ext is 576 bytes
    *** SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 3228) [dpxxdisp.c   1286]
        shared lib "dw_xml.dll" version 32 successfully loaded
        shared lib "dw_xtc.dll" version 32 successfully loaded
        shared lib "dw_stl.dll" version 32 successfully loaded
        shared lib "dw_gui.dll" version 32 successfully loaded
        shared lib "dw_mdm.dll" version 32 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    Mon Mar 17 11:04:19 2014
    *** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5529]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >SAPdev01_ECD_00                         <
    DpShMCreate: sizeof(wp_adm)        29792    (1752)
    DpShMCreate: sizeof(tm_adm)        5912704    (29416)
    DpShMCreate: sizeof(wp_ca_adm)        24064    (80)
    DpShMCreate: sizeof(appc_ca_adm)    8000    (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    DpShMCreate: sizeof(comm_adm)        552080    (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)        0    (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)        0    (72)
    DpShMCreate: sizeof(vmc_adm)        0    (1864)
    DpShMCreate: sizeof(wall_adm)        (41664/36752/64/192)
    DpShMCreate: sizeof(gw_adm)    48
    DpShMCreate: SHM_DP_ADM_KEY        (addr: 0000000008DC0050, size: 6614144)
    DpShMCreate: allocated sys_adm at 0000000008DC0050
    DpShMCreate: allocated wp_adm at 0000000008DC2270
    DpShMCreate: allocated tm_adm_list at 0000000008DC96D0
    DpShMCreate: allocated tm_adm at 0000000008DC9730
    DpShMCreate: allocated wp_ca_adm at 000000000936CFB0
    DpShMCreate: allocated appc_ca_adm at 0000000009372DB0
    DpShMCreate: allocated comm_adm at 0000000009374CF0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 00000000093FB980
    DpShMCreate: allocated gw_adm at 00000000093FBA00
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 00000000093FBA30
    DpShMCreate: allocated wall_adm at 00000000093FBA40
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    rdisp/queue_size_check_value :  -> off
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 1018 blocks reserved for free list.
    ES initialized.
    Mon Mar 17 11:04:20 2014
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1681]
    ***LOG Q0K=> DpMsAttach, mscon ( SAPdev01) [dpxxdisp.c   12483]
    Mon Mar 17 11:04:21 2014
    DpStartStopMsg: send start message (myname is >SAPdev01_ECD_00                         <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Mon Mar 17 11:04:22 2014
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7010, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1048]
    DpMsgAdmin: Set patchno for this platform to 32
    Release check o.K.
    Mon Mar 17 11:05:01 2014
    my types changed after wp death/restart 0xbf --> 0xbe
    my types changed after wp death/restart 0xbe --> 0xbc
    my types changed after wp death/restart 0xbc --> 0xb8
    my types changed after wp death/restart 0xb8 --> 0xb0
    my types changed after wp death/restart 0xb0 --> 0xa0
    my types changed after wp death/restart 0xa0 --> 0x80
    *** DP_FATAL_ERROR => DpWPCheck: no more work processes
    *** DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:11 2014
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)            Mon Mar 17 05:35:11 2014
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA     3440 Ended         no      1   0        0                                                                         
    1 DIA     3448 Ended         no      1   0        0                                                                         
    2 DIA     3456 Ended         no      1   0        0                                                                         
    3 DIA     3468 Ended         no      1   0        0                                                                         
    4 DIA     3476 Ended         no      1   0        0                                                                         
    5 DIA     3484 Ended         no      1   0        0                                                                         
    6 DIA     3492 Ended         no      1   0        0                                                                         
    7 DIA     3500 Ended         no      1   0        0                                                                         
    8 DIA     3508 Ended         no      1   0        0                                                                         
    9 DIA     3516 Ended         no      1   0        0                                                                         
    10 UPD     3524 Ended         no      1   0        0                                                                         
    11 ENQ     3532 Ended         no      1   0        0                                                                         
    12 BTC     3540 Ended         no      1   0        0                                                                         
    13 BTC     3548 Ended         no      1   0        0                                                                         
    14 BTC     3556 Ended         no      1   0        0                                                                         
    15 SPO     3564 Ended         no      1   0        0                                                                         
    16 UP2     3572 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics            Mon Mar 17 05:35:11 2014
    ===========================
    +------+--------+--------+--------+--------+--------+
    |  Typ |    now |   high |    max | writes |  reads |
    +------+--------+--------+--------+--------+--------+
    | NOWP |      0 |      2 |   2000 |      5 |      5 |
    +------+--------+--------+--------+--------+--------+
    |  DIA |      5 |      5 |   2000 |      5 |      0 |
    +------+--------+--------+--------+--------+--------+
    |  UPD |      0 |      0 |   2000 |      0 |      0 |
    +------+--------+--------+--------+--------+--------+
    |  ENQ |      0 |      0 |   2000 |      0 |      0 |
    +------+--------+--------+--------+--------+--------+
    |  BTC |      0 |      0 |   2000 |      0 |      0 |
    +------+--------+--------+--------+--------+--------+
    |  SPO |      0 |      0 |   2000 |      0 |      0 |
    +------+--------+--------+--------+--------+--------+
    |  UP2 |      0 |      0 |   2000 |      0 |      0 |
    +------+--------+--------+--------+--------+--------+
    max_rq_id        12
    wake_evt_udp_now    0
    wake events          total     8,  udp     4 ( 50%),  shm     4 ( 50%)
    since last update    total     8,  udp     4 ( 50%),  shm     4 ( 50%)
    Dump of tm_adm structure:            Mon Mar 17 05:35:11 2014
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks            Mon Mar 17 05:35:11 2014
    =============================
    Slots: 300, Used: 1, Max: 0
    +------+--------------+----------+-------------+
    |   id | owner        |   pid    | eyecatcher  |
    +------+--------------+----------+-------------+
    |    0 | DISPATCHER   |       -1 | *WPCAAD000* |
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:16 2014
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >SAPdev01_ECD_00                         < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (3424) (SOFT_KILL)
    Stop icman
    killing process (3432) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:3424  HANDLE:776)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:17 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:3424  HANDLE:776)
    wait for end of icman
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:18 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:19 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:20 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:21 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:22 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:23 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:24 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:25 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:26 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:27 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:28 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:3432  HANDLE:784)
    DpStartStopMsg: send stop message (myname is >SAPdev01_ECD_00                         <)
    DpStartStopMsg: Write AD_STARTSTOP message with type=  0, name=SAPdev01_ECD_00     , sapsysnr= 0, hostname=SAPdev01                                                       
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 2 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 2 (r)
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    Mon Mar 17 11:05:29 2014
    NiIPeek: peek for hdl 2 timed out (r; 1000ms)
    NiIRead: read for hdl 2 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12829]
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelNSet: set events of sock 772 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelNRemove: removed sock 772 (pos=2)
    SiSelNRemove: removed sock 772
    NiSelIRemove: removed hdl 2
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 2 / sock 772
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 3228) [dpxxdisp.c   11045]
    Good Bye .....
    dev_ms:
    trc file: "dev_ms", trc level: 1, release: "701"
    [Thr 2596] Sun Mar 16 17:31:39 2014
    [Thr 2596] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
    systemid   562 (PC with Windows NT)
    relno      7010
    patchlevel 0
    patchno    11
    intno      20020600
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        4004
    [Thr 2596] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 4004) [msxxserv.c   1853]
    [Thr 2596] load acl file = E:\usr\sap\ECD\SYS\global\ms_acl_info.DAT
    [Thr 2596] MsGetOwnIpAddr: my host addresses are :
    [Thr 2596]   1 : [192.168.42.205] SAPdev01 (HOSTNAME)
    [Thr 2596]   2 : [127.0.0.1] SAPdev01 (LOCALHOST)
    [Thr 2596]   3 : [169.254.221.8] SAPdev01 (NILIST)
    [Thr 2596] MsHttpInit: full qualified hostname = SAPdev01
    [Thr 2596] HTTP logging is switch off
    [Thr 2596] set HTTP state to LISTEN
    [Thr 2596] ms/icf_info_server : deleted
    [Thr 2596] *** I listen to port sapmsECD (3600) ***
    [Thr 2596] *** I listen to internal port 3900 (3900) ***
    [Thr 2596] *** HTTP port 8100 state LISTEN ***
    [Thr 2596] CUSTOMER KEY: >J0169343196<
    [Thr 2596] build version=701.2008.03.06
    [Thr 2596] Sun Mar 16 17:32:52 2014
    [Thr 2596] *** ERROR => MsSClientHandle: no server provides service ENQ  (4), requested from SAPdev01_ECD_00 [msxxserv.c   4711]
    [Thr 3648] Sun Mar 16 17:39:27 2014
    [Thr 3648] MsSExit: received SIGINT (2)
    [Thr 3648] ***LOG Q02=> MsSHalt, MSStop (Msg Server 4004) [msxxserv.c   6021]
    dev_w0:
    trc file: "dev_w0", trc level: 1, release: "701"
    *  ACTIVE TRACE LEVEL           1
    *  ACTIVE TRACE COMPONENTS      all, MJ

    B Sun Mar 16 17:31:45 2014
    B  create_con (con_name=R/3)
    B  Loading DB library 'E:\usr\sap\ECD\DVEBMGS00\exe\dbmssslib.dll' ...
    B  Library 'E:\usr\sap\ECD\DVEBMGS00\exe\dbmssslib.dll' loaded
    B  Version of 'E:\usr\sap\ECD\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.31)
    B  New connection 0 created
    M sysno      00
    M sid        ECD
    M systemid   562 (PC with Windows NT)
    M relno      7010
    M patchlevel 0
    M patchno    32
    M intno      20020600
    M make:      multithreaded, Unicode, 64 bit, optimized
    M pid        3256
    M
    M  kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3256) [dpxxdisp.c   1348]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)        29792    (1752)
    M  DpShMCreate: sizeof(tm_adm)        5912704    (29416)
    M  DpShMCreate: sizeof(wp_ca_adm)        24064    (80)
    M  DpShMCreate: sizeof(appc_ca_adm)    8000    (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    M  DpShMCreate: sizeof(comm_adm)        552080    (1088)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)        0    (104)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)        0    (72)
    M  DpShMCreate: sizeof(vmc_adm)        0    (1864)
    M  DpShMCreate: sizeof(wall_adm)        (41664/36752/64/192)
    M  DpShMCreate: sizeof(gw_adm)    48
    M  DpShMCreate: SHM_DP_ADM_KEY        (addr: 000000000AA00050, size: 6614144)
    M  DpShMCreate: allocated sys_adm at 000000000AA00050
    M  DpShMCreate: allocated wp_adm at 000000000AA02270
    M  DpShMCreate: allocated tm_adm_list at 000000000AA096D0
    M  DpShMCreate: allocated tm_adm at 000000000AA09730
    M  DpShMCreate: allocated wp_ca_adm at 000000000AFACFB0
    M  DpShMCreate: allocated appc_ca_adm at 000000000AFB2DB0
    M  DpShMCreate: allocated comm_adm at 000000000AFB4CF0
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 000000000B03B980
    M  DpShMCreate: allocated gw_adm at 000000000B03BA00
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 000000000B03BA30
    M  DpShMCreate: allocated wall_adm at 000000000B03BA40
    M  rdisp/queue_size_check_value :  -> off
    M  ThTaskStatus: rdisp/reset_online_during_debug 0
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  ThInit: running on host SAPdev01
    M  calling db_connect ...
    C  Callback functions for dynamic profile parameter registered
    C  Thread ID:2876
    C  Thank You for using the SLODBC-interface
    C  Using dynamic link library 'E:\usr\sap\ECD\DVEBMGS00\exe\dbmssslib.dll'
    C  dbmssslib.dll patch info
    C    patchlevel   0
    C    patchno      31
    C    patchcomment Handle long parameters as LOBs (1296540)
    C  Local connection used on SAPDEV01 to named instance: lpc:SAPDEV01\ECD
    C  ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
    C  (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
    C  ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
    C  (0) [IM006] [Microsoft][SQL Server Native Client 10.0]Packet size change not supported by server, default used
    C  ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
    C  (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
    C  ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
    C  (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
    C  ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
    C  (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
    C  ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
    C  (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
    C  ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
    C  (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
    C  Connection 0 failed using Driver={SQL Server Native Client 10.0};Server=SAPDEV01\ECD;AutoTranslate=no;Trusted_Connection=yes;WSID=SAPDEV01;APP=R3D00 comm rd ODBC;Database=ECD;

    B  ***LOG BY2=> sql error 18456  performing CON [dbsh#2 @ 1208] [dbsh    1208 ]
    B  ***LOG BY0=> [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'. [dbsh#2 @ 1208] [dbsh    1208 ]
    B  ***LOG BY2=> sql error 18456  performing CON [dblink#3 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'. [dblink#3 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1449]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10563]

    M  Info for wp 0

    M    pid = 3256
    M    severity = 0
    M    status = 0
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    attachedVm = no VM

    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server SAPdev01_ECD_00 on host SAPdev01 (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Sun Mar 16 17:31:45 2014
    M  *  RELEASE     701
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10783
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************

    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   723]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  261]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 3256) [dpnttool.c   334]

  • Starting dispatcher server ....Failed to create logfile:

    On a test machine we filled the var partition. Now we get the following error when attempting to start-msg
    Starting dispatcher server ....Failed to create logfile: No space left on device
    The partition has been clear off and has lots of free space. but still bet the above error.
    Any ideas?
    Thanks,
    Darren

    Hi,
    You may also want to run ./imsimta cnbuild;./imsimta restart. I have seen cases where full filesystems has lead to corruption of the MTA configuration database -- which lead to all sorts of mess.
    And if all that fails, you may want to truss the startup and see what file it tried to create/access when it reported that error.
    Regards,
    Shane.

  • Error when starting Weblogic server with Coherence

    We want to use Coherence 3.6 with Weblogic Server 10.3. During server startup, we get the following error. My understanding is the cluster should be started automatically based on the configuration listed below the error. Appreciate any pointers.
    <Dec 15, 2011 3:20:11 PM PST> <Error> <Coherence> <BEA-000000> <2011-12-15 15:20:11.920/67.311 Oracle Coherence SE 3.6.0.4 <Error> (thread=Cluster, member=n/a): This member could not join the cluster because of a configuration mismatch between this member and the configuration being used by the rest of the cluster. This member specified a cluster name of "EPCIS" which did not match the name of the running cluster. This indicates that there are multiple clusters on this network attempting to use overlapping network configurations. Rejected by Member(Id=9, Timestamp=2011-11-16 13:58:42.941, Address=10.229.189.30:8088, MachineId=21022, Location=site:us.oracle.com,machine:adc2101177,process:30667, Role=WeblogicServer).>
    <Dec 15, 2011 3:20:11 PM PST> <Error> <oracle.apps.pas.epc.framework.db.Cache> <BEA-000000> <java.lang.RuntimeException: Failed to start Service "Cluster" (ServiceState=SERVICE_STOPPED, STATE_JOINING)>
    <Dec 15, 2011 3:20:11 PM PST> <Error> <Coherence> <BEA-000000> <2011-12-15 15:20:11.957/67.349 Oracle Coherence SE 3.6.0.4 <Error> (thread=[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Error while starting cluster: java.lang.RuntimeException: Failed to start Service "Cluster" (ServiceState=SERVICE_STOPPED, STATE_JOINING)
    CONFIGURATION:
    We have the following descriptor (epcis-coherence-cache-config.xml) in $DOMAIN_HOME/epc-config:
    <?xml version="1.0"?>
    <!DOCTYPE cache-config SYSTEM "cache-config.dtd">
    <cache-config>
    <caching-scheme-mapping>
    <cache-mapping>
    <cache-name>*</cache-name>
    <scheme-name>distributed</scheme-name>
    </cache-mapping>
    </caching-scheme-mapping>
    <caching-schemes>
    <distributed-scheme>
    <scheme-name>distributed</scheme-name>
    <service-name>DistributedCache</service-name>
    <backing-map-scheme>
    <local-scheme></local-scheme>
    </backing-map-scheme>
    <autostart>true</autostart>
    </distributed-scheme>
    </caching-schemes>
    </cache-config>
    We also have tangosol-coherence-override.xml in the same dir:
    <coherence>
    <cluster-config>
    <member-identity>
    <cluster-name system-property="tangosol.coherence.clustername">EPCIS</cluster-name>
    </member-identity>
    </cluster-config>
    <configurable-cache-factory-config>
    <class-name>com.tangosol.net.DefaultConfigurableCacheFactory</class-name>
    <init-params>
    <init-param>
    <param-type>java.lang.String</param-type>
    <param-value>epcis-coherence-cache-config.xml</param-value>
    </init-param>
    </init-params>
    </configurable-cache-factory-config>
    <license-config>
    <edition-name system-property="tangosol.coherence.edition">SE</edition-name>
    <license-mode system-property="tangosol.coherence.mode">dev</license-mode>
    </license-config>
    </coherence>
    We have modified startWebLogic.sh by adding:
    PRE_CLASSPATH="/slot/xyz/oracle/mwhome/oracle_common/modules/oracle.coherence_3.6/coherence.jar:${DOMAIN_HOME}/epc-config/:${PRE_CLASSPATH}"

    As the error message says, your WebLogic server is trying to join a cluster that has a different cluster name.
    This bit in your tangosol-coherence-override.xml file or the tangosol.coherence.clustername system property must be the same in all members of the cluster
    <cluster-name system-property="tangosol.coherence.clustername">EPCIS</cluster-name>JK

  • Error while starting weblogic server

    Hi, I am getting following error while starting weblogic server
    Unexpected Signal : 11 occurred at PC=0x40170bc5 Function name=fill_in_stack_trace__19java_lang_ThrowableG6HandleP6Thread
    Library=/bea/jdk131/jre/lib/i386/client/libjvm.so
    Current Java thread: at java.lang.Throwable.fillInStackTrace(Native Method) at
    java.lang.Throwable.<init>(Throwable.java:78) at java.lang.Error.<init>(Error.java:37)
    at java.lang.LinkageError.<init>(LinkageError.java:29) at java.lang.IncompatibleClassChangeError.<init>(IncompatibleClassChangeError.java:29)
    at java.lang.AbstractMethodError.<init>(AbstractMethodError.java:30)
    Environment : Weblogic 6.0 Sp2 on Linux Red hat 7.1
    jdk 1.31
    TIA
    Ashwani

    Hi,
    1)Could you please try logging into sqlplus using using the below command :-
        sqlplus "/ as sysdba"
    2)Execute the below command to check if the password in expired :-
      select username, account_status, expiry_date, where username='MDS username';
    3)Change the password if the password has been expired by following the below command :-
       alter user <user> identified by <password>;
    4)Once the above steps are followed please login into the Weblogic Admin Console and follow the below steps:-
        + Go to DataSources ---> Select the MDS schema ----> change the password which was given in step no.3
        + Restart the Weblogic once again.
    5)Lets us know the result.
    Regards,
    Prakash.

Maybe you are looking for

  • Pages on my iPad is not syncing with iCloud

    Here is the story I have an iPad 2 - I use Pages on my iPad and macbook and save all my Pages documents in the cloud - I have approximately 1,000 documents. I have plenty of memory available on the iPad. A month ago Pages kept struggling to open on m

  • Quick look in Mail open's with the wrong application.

    When using quick look in Apple Mail, there is an option in the top right corner to open with, in my case, "Open with Adobe Acrobat." If I click and hold on this button, it brings a drop down menu allowing me to choose a different application. When I

  • Forms 2 j2ee migration

    Hi, We are in the process of migrating (web) Forms/Reports 6i app to the J2EE framework. It looks like the number of source files will increase 10 folds. For each and every .fmb (or .rdf) we will have about 10 new .java sources. The migrated app will

  • How to see oficial apple keynote streaming?

    How to see oficial apple keynote streaming?

  • Why does my profile pic default to iCloud pic?

    Can I have a different picture on my login screen on my iMac rather than the on that is on my icloud profile?