Error in starting SAP application

Hi gurus,
when i execute STARTSAP ALL , getting a message as
ABAP Database not available
TNS -12541 no listener
then i executed lsnrctl status
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
   Solaris Error: 146: Connection refused
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=S11))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
   Solaris Error: 146: Connection refused
Connecting to (ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=ccmprsg)(PORT=1527))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
   Solaris Error: 146: Connection refused
i have checked the note 609332.
Could anyone tell me what i have to do to rectify this issue.
server OS is Sun solaris
regards
Naveen kumar

Hello Naveen,
Listener belongs to the database, start the listener with ora<sid> , if its already started, stop it and start again.
To read more about Oracle listener, please check this link:
http://download-uk.oracle.com/docs/cd/A97630_01/network.920/a96580/listener.htm
Everything should be fine.
Regards,
siddhesh

Similar Messages

Error while starting SAP Application Server

Hello everyone,
This morning, i tried to start the SAP application Server, and i have this message error, some sentances are in frensh , i translate it in english with this sign --> before.
===================================================
============== Starting System NSP ================
===================================================
=============== Starting database instance ...
Le nom de service n'est pas valide.
-->The service name is invalid.
Vous obtiendrez une aide supplémentaire en entrant NET HELPMSG 2185.
-->More help is available by typing NET HELPMSG 2185.
The MaxDB Database Starter, Version 7.7.04.23
Copyright 2000-2008 by SAP AG
ERR
-24988,ERR_SQL: SQL error
-104,DBM command impossible at this time
20013,Admin command cannot enter critical state 'Backup'
Error: Error while calling dbmcli
"D:sapdbprogramspgmdbmcli" -d NSP -u , db_online
============== Start database failed !
Can somone, explain me, please, the origin of this problem and may be a solution to solve it.
Thank you and have a nice day.
Best regards.
Amine

Seem that is a problem in starting DB instance phase, specificly for DBMS instance (you need to check detailed DB starting log in run directory).
For Run Directory, check this link:
http://www.sapdb.org/7.4/htmhelp/ff/2d823b572b844ee10000000a11402f/frameset.htm
For DB Log Files:
http://www.sapdb.org/7.4/htmhelp/9c/2d04073493af41844be62f15d252f3/content.htm
Is a Local SAP System?

Adobe Template Error after starting the application

Hi all,
I just developed a WebDynpro Application in which a Adobe Form is used in one view.
After deploying and starting the application I am expecting, that the view with its adobe form is displayed.
Unfortunately I am getting, the following error message:
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: IOException occured while creating template stream from the TemplateSource : ./temp/webdynpro/blablabla.Adstest2/Adstest2View_InteractiveForm.xdp (No such file or directory)
Does anybody know how to solve this problem?
Thank you in advance.
Best regards, Patrick.

Hi Patrick,
Make sure ADS is configured properly on server & credentials are installed on ur server.Check whether pdfSource is available .It looks like a configuration problem bcos xdp file get generated automatically with adobe form.
regards
Sumit

Custom error message in SAP application log

Is there a way to add a custom error message to the SAP application log without passing the message variables MSGV1, MSGV2, MSGV3, MSGV4 and the Message class and number.
We want to pass a custom message from the BAPIRET2-MESSAGE without giving it a Message class and number. The reason for this is that we are using class based exceptions instead of the traditional message class with errors. When we catch the class based exception, we take the error text of the exception and put in in the BAPIRET2-message and set the BAPIRET2-TYPE as 'E'. Now we want to add this to the SAP application log.
The call to 'BAL_LOG_MSG_ADD' takes a structure BAL_S_MSG which is just like BAPIRET2. However this function builds the entry to the application log use the message variables MSGV1, MSGV2, MSGV3, MSGV4. There is no provision to pass in the BAPIRET2 message.
Add message to application log
CALL FUNCTION 'BAL_LOG_MSG_ADD'
 EXPORTING
 i_log_handle = app_log_handle
 i_s_msg = log_message
Thanks,
Jay

Hi Jay,
Did you see BAL_LOG_EXCEPTION_ADD?
This FM is represented by the structure BAL_S_EXC. This can have various versions as described below:
Data of BAL_S_EXC Structure / Use
EXCEPTION / Exception class from which an exception text
 is added to the log. This field must be filled.
MSGTY / Message type (MSGTY) of a T100 message.
 This field must also be filled for exceptions.
PROBCLASS,
DETLEVEL,
ALSORT, TIME_STMP / Message or exception attributes, such as
 problem class (PROBCLASS, for
 example, "very important"), level of detail
 (DETLEVEL, from 1 to 9), sort criterion
 (ALSORT, unrestricted) and timestamp
 (TIME_STMP). These fields can be displayed
 in the log (except TIME_STMP).
MSG_COUNT / This attribute is not used for exceptions.
Follow the link below for more details:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/d6/5d7f38f52f923ae10000009b38f8cf/frameset.htm">SAP Help DOc</a>
Hope this helps.
Thanks
Sanjeev

Error while starting SAP Content server

Hi Experts,
I have installed content server, and from OAC0 i have imported certificate. The status is showing running. In details tab, when i enter on start button, I am getting below error.
HTTP error: 500 (Internal Server Error) "CreateTab ContentStorage, connect error SQLConnect failed, [SAP AG][SDBODBC DLL][SAP MaxDB] Commun
Message no. CMS025
Diagnosis
Error in accessing via HTTP
500 (Internal Server Error)
"CreateTab ContentStorage, connect error SQLConnect failed, [SAP AG][SDBODBC DLL][SAP MaxDB] Commun
Can any one suggest possible solution?
Regards
Aditya

Hi Aditya
Could you refer the SAP Notes
1764842 - Connection problem to SAP Content Server
582765 - SAP Content Server cannot address database
Br
SS

Can not start SAP application server

Hi All,
I use RZ10 to change instance profile, after that I shutdown SAP application but nothing can start.
In process list : msg_server.exe : stopped
 disp+work.exe : stopped
 igswd.exe : stopped
Pls help me resolve it.

Hi,
This is new dev_disp file: ______________
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid DEV
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 185
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 944
Fri May 27 08:54:12 2011
kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 944) [dpxxdisp.c 1285]
 shared lib "dw_xml.dll" version 185 successfully loaded
 shared lib "dw_xtc.dll" version 185 successfully loaded
 shared lib "dw_stl.dll" version 185 successfully loaded
 shared lib "dw_gui.dll" version 185 successfully loaded
 shared lib "dw_mdm.dll" version 185 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri May 27 08:54:17 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5418]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >dianasvr1_DEV_00 <
DpShMCreate: sizeof(wp_adm) 29792 (1752)
DpShMCreate: sizeof(tm_adm) 5912704 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F1D0050, size: 6614016)
DpShMCreate: allocated sys_adm at 000000000F1D0050
DpShMCreate: allocated wp_adm at 000000000F1D21F0
DpShMCreate: allocated tm_adm_list at 000000000F1D9650
DpShMCreate: allocated tm_adm at 000000000F1D96B0
DpShMCreate: allocated wp_ca_adm at 000000000F77CF30
DpShMCreate: allocated appc_ca_adm at 000000000F782D30
DpShMCreate: allocated comm_adm at 000000000F784C70
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F80B900
DpShMCreate: allocated gw_adm at 000000000F80B980
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F80B9B0
DpShMCreate: allocated wall_adm at 000000000F80B9C0
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 18431MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 18432MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 4607 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1692]
***LOG Q0K=> DpMsAttach, mscon ( dianasvr1) [dpxxdisp.c 12429]
DpStartStopMsg: send start message (myname is >dianasvr1_DEV_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 185
Release check o.K.
Fri May 27 08:54:57 2011
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=357
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 27 08:55:07 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri May 27 01:55:07 2011
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3652 Ended no 1 0 0
1 DIA 2964 Ended no 1 0 0
2 DIA 3956 Ended no 1 0 0
3 DIA 2992 Ended no 1 0 0
4 DIA 3308 Ended no 1 0 0
5 DIA 1072 Ended no 1 0 0
6 DIA 1112 Ended no 1 0 0
7 DIA 1820 Ended no 1 0 0
8 DIA 3456 Ended no 1 0 0
9 DIA 2496 Ended no 1 0 0
10 UPD 608 Ended no 1 0 0
11 ENQ 1368 Ended no 1 0 0
12 BTC 2972 Ended no 1 0 0
13 BTC 3656 Ended no 1 0 0
14 BTC 3604 Ended no 1 0 0
15 SPO 2724 Ended no 1 0 0
16 UP2 3528 Ended no 1 0 0
Dispatcher Queue Statistics Fri May 27 01:55:07 2011
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Fri May 27 01:55:07 2011
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri May 27 01:55:07 2011
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=357
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 27 08:55:12 2011
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >dianasvr1_DEV_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1252) (SOFT_KILL)
Stop icman
killing process (4044) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1252 HANDLE:324)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=357
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 27 08:55:13 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1252 HANDLE:324)
wait for end of icman
[DpProcDied] Process lives (PID:4044 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=357
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 27 08:55:14 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4044 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=357
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 27 08:55:15 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4044 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=357
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 27 08:55:16 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4044 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=357
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 27 08:55:17 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4044 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=357
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 27 08:55:18 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4044 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=357
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 27 08:55:19 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4044 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=357
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 27 08:55:20 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4044 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=357
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 27 08:55:21 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4044 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=357
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 27 08:55:22 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4044 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=357
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 27 08:55:23 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4044 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=357
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 27 08:55:24 2011
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4044 HANDLE:336)
DpStartStopMsg: send stop message (myname is >dianasvr1_DEV_00 <)
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes

Error in Start SAP system (Post Processing)

Hi.,
I got an error during IDES installation in the step "Start SAP system (Post Processing)".
The details of START.LOG is as follows
running sapstart.exe GML 00 xyz -wait
Start service SAP_00 on machine
OpenSCManager of
failed. Error#: 6
CreateNamedPipe for
\pipe\SAP_00 Failed, Extended Error #123
Start service SAP_00 on machine
OpenSCManager of
failed. Error#: 6
Start (StartSAPService) failed.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
Kindly help me out in this regard.
Thanks in Advance,
Sridhar

Sridhar,
Check the path for the profile (whether it is accessible or not). Just to make sure that system has been installed properly, you could try connection check to the database also.
Thanks.
regards,
Murali

Error in starting SAP Systems at SAP Management Console

Hi,
I have received the following error messages , after installed the "SAP NetWeaver Composition Environment 7.1 sp1" run SAP management Console->SAP Systems-> start .
after that ,the system ask me to logon on for webservice authentication,then i write my os user and password,but the system deny me,and the error follow as:
error messages:
Start failed:2
Permission denied
I need help,
best regards

Hi
You need to logon as <sid>adm and provide the password... if you try to start the service with a user without auth you'll get permission denied.
User must be <sid>adm or a member of the Local or Domain Administrators
Regards
Juan

Error when starting ZENworks Application Launcher Explorer

Dear All,
I am a Hong Kong user which very very new to Novell system. My colleague having a problem that, after he has login to the system (window XP), normally the ZENworks Application Explorer should be able to pop out automatically. But suddenly it is fail to do so started from yesterday. An error message "ZEN works Application Explorer Executable has encountered a problem and need to close." keeps occurs, with Error signature "AppName: naldesk.exe AppVer: 2001.4.10.0 ModName: ntdll.dll ModVer: 5.1.2600.2180 Offset: 0001103c".
It is very strange that if we login to the system with other by differenct account, there will be no problem. The following are the examples:
1.) Colleague A account to do login action in Colleague A computer -> failed to launch ZENworks Application Explorer.
2.) Colleague A account to do login action in Colleague B computer -> success to launch ZENworks Application Explorer.
3.) Colleague B account to do login action in Colleague A computer -> success to launch ZENworks Application Explorer.
4.) Colleague B account to do login action in Colleague B computer -> success to launch ZENworks Application Explorer.
the configuration of the computers are as follow:
OS : Window XP sp2
ZENworks Application Launcher Explorer Version : 3.1 (20010410)
Can anyone help me? Thanks so much.

Originally Posted by tree_lamkh
Dear All,
I am a Hong Kong user which very very new to Novell system. My colleague having a problem that, after he has login to the system (window XP), normally the ZENworks Application Explorer should be able to pop out automatically. But suddenly it is fail to do so started from yesterday. An error message "ZEN works Application Explorer Executable has encountered a problem and need to close." keeps occurs, with Error signature "AppName: naldesk.exe AppVer: 2001.4.10.0 ModName: ntdll.dll ModVer: 5.1.2600.2180 Offset: 0001103c".
It is very strange that if we login to the system with other by differenct account, there will be no problem. The following are the examples:
1.) Colleague A account to do login action in Colleague A computer -> failed to launch ZENworks Application Explorer.
2.) Colleague A account to do login action in Colleague B computer -> success to launch ZENworks Application Explorer.
3.) Colleague B account to do login action in Colleague A computer -> success to launch ZENworks Application Explorer.
4.) Colleague B account to do login action in Colleague B computer -> success to launch ZENworks Application Explorer.
the configuration of the computers are as follow:
OS : Window XP sp2
ZENworks Application Launcher Explorer Version : 3.1 (20010410)
Can anyone help me? Thanks so much.
Can anyone help me ?

Error when starting SAP J2EE Engine Log Viewer Service

Hi,
I'm running SAP EP6 SP14.
I need to make the default trace log file on the WAS Server (Windows) available to the developer's. For this goal, I am attempting to install and start the SAP J2EE Engine LogViewer Service on the WAS. I think I have configured the service.ini file appropropriately. When I register the service, I get a successful message that the service has been registed. The service even shows up in the Windows Service Manager.
However, when I attempt to start the service, the process fails after a 4-minute attempt. I eventually get an error popup saying
"Could not start the SAP J2EE Engine Logviewer service on the Local Computer"
"Error 1053: The service did not respond to the start or control request in a timely fashion".
The service shows as "starting" until I reboot the WAS.
The logviewer.bat runs fine on the WAS itself.
I can also connect from the client to the WAS thru the J2EE connection, but that requires the admin password. I'd rather get this approach to work.
Regards,
Kevin

Hi,
I have the same error during starting the service. How did you resolve that error?
Regards
Sabine

Error while starting SAP from mmc Console

Hi,
I am trying to start SAP system through sapmmc, by right clicking on the System and pressing start. But getting this unknown error:
Start Failed: 2
NIECONN_REFUSED (WSAETIMEOUT: Connection timed out), NRawConnect failedin plugin_fopen()
Checking Start Permission on http://oiam:50113 failed: NIECONN_REFUSED (WSAETIMEOUT: Connection timed out),
NRawConnect failed in plugin_fopen()
Can anyone help me in getting this resolved.
Regards,
Shubhi

Hi,
Restart the OS and try........i have faced the similar problem..I tried it by restarting the OS....
but,
my database was on AIX and SAP was on windows....
I dont whether this helps you....i
Regards
Suresh

Error in starting SAP GUI as part of an Java RFC call from a PC

Hi,
We are on the 4.6C version of SAP and have the latest basis kernel patches that allow an RFC connection to start the SAP GUI. The program that I am running externally is java using the 3.0.1 JCo. The OS of the PC I am using is Windows XP. The SAPGUI version is 7.10 patch level 11.
The program seems to be working properly as the command prompt window goes grey as if there is another window being opened but then I get back this error message and I do not see the GUI.
The message I am getting back is:
Exception in thread "main" com.sap.conn.jco.JCoException:(136) JCO_ERROR_ILLEGAL_STATE:Launching SAP GUI failed, though it was requested(error message:Communication with SAPGUI timed out)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcClient.startSAPGui(MiddlewareJavaRfc.java:1853)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcClient.connect(MiddlewareJavaRfc.java:1285)
at com.sap.conn.jco.rt.ClientConnection.connect(ClientConnection.java:661)
at com.sap.conn.jco.rt.PoolingFactory.init(PoolingFactory.java:103)
at com.sap.conn.jco.rt.ConnectionManager.createFactory(ConnectionManager.java:171)
at com.sap.conn.jco.rt.DefaultConnectionManager.createFactory(DefaultConnectionManager.java:44)
at com.sap.conn.jco.rt.ConnectionManager.getFactory(ConnectionManager.java:160)
at com.sap.conn.jco.rt.RfcDestination.initializ(RfcDestination.java:766)
at com.sap.conn.jco.rt.RfcDestination.getSystemID(RfcDestination.java:794)
at com.sap.conn.jco.rt.RepositoryManager.getRepository(RepositoryManager.java:32)
at com.sap.conn.jco.rt.RfcDestination.getRepository(RfcDestination.java:865)
at GISToSAPWO_Test.get_wo_call(GISToSAPWo.java:91)
at GISToSAPWO_Test.main(GISToSAPWO_Test.java:206)
I have been all over trying to find the solution to this and have come up empty. Any help will be greatly appreciated. If this is the wrong forum for this please let me know and I will re-post.
Thank you in advance for any information you can pass on about the issue,
Mark

Hi Greetson,
Thank you in advance for your response. It is greatly appreciated.
1) In a way yes. I am using the connection setting USE_SAPGUI = 1. This is suppose to start the GUI prior to starting the RFC's program run. If this is not correct please let me know.
2) The code is part of the JCo and the RFC library from what I have read. If this is not correct please let me know.
3) I am only testing from my PC at this moment. I have re-installed my SAP GUI and am now at patch level 13 on 7.10.
4) The application passes in the connection information which includes username and password along with the parameters for the RFC call. I would like the SAP GUI to open without the user having to re-enter his/her username and password. I thought that once the RFC is called using the dialog users credentials that the GUI would then open using the connection. I have used the java pooled connection method and it still does not open the GUI.
5) The purpose is to pass Equipment objects, Functional Location objects and Leak Id objects to an RFC to open a list screen from IW39, List Maintenance Order transaction, for display of each at one pass, as well as open Excel with data from classification for the Leak Id's.
Hope this sheds some light on the problem I am having. Please let me know if more information is needed.
Best regards,
Mark

Error when starting SAP Business One Integration Server Service

Hi all,
I have a very urgent problem when installing B1iSN:
I'm installing B1iSN2007 for a customer (Windows server2008R2, SBO 8.8.1),
and at the beginning of the installation, after instaling the technology, I have an error,
The Tomcat server can't start.
I get the following error:
Windows could not start the SAP Business One Integartion service on Local Computer. For more Information, review the system
event Log.If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 0.
In the event viewer I didn't find any more details.
In the tomcat logs (Under SAP Business One Integration\B1iServer\tomcat\logs) I find this:
[2012-01-05 15:12:26] [info] Procrun (2.0.4.0) started
[2012-01-05 15:12:26] [info] Service Tomcat5 name SAP Business One Integration Service
[2012-01-05 15:12:26] [info] Service Tomcat5 installed
[2012-01-05 15:12:26] [info] Procrun finished.
[2012-01-05 15:12:26] [174 javajni.c] [error] The specified module could not be found.
[2012-01-05 15:12:26] [994 prunsrv.c] [error] Failed creating java ..\..\..\jdk1.5.0_xx_sap\jre\bin\server\jvm.dll
[2012-01-05 15:12:26] [1269 prunsrv.c] [error] ServiceStart returned 1
[2012-01-05 15:13:13] [174 javajni.c] [error] The specified module could not be found.
[2012-01-05 15:13:13] [994 prunsrv.c] [error] Failed creating java ..\..\..\jdk1.5.0_xx_sap\jre\bin\server\jvm.dll
[2012-01-05 15:13:13] [1269 prunsrv.c] [error] ServiceStart returned 1
[2012-01-05 15:15:27] [174 javajni.c] [error] The specified module could not be found.
[2012-01-05 15:15:27] [994 prunsrv.c] [error] Failed creating java ..\..\..\jdk1.5.0_xx_sap\jre\bin\server\jvm.dll
[2012-01-05 15:15:27] [1269 prunsrv.c] [error] ServiceStart returned 1
What is the problem? How can I fix it?
Thanks a lot
Chana

Hi Trinidad,
Thanks for your help!!!
1.
I didn't install EventSender and DIProxy yet, I tried first to upload and deploy the zip files, but I couldn't open the Itegration Application Explorer.
2.
The jvm.dll file is in in the folder pointed by the logs: C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap\jre\bin\server
and it is also in C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap_64\jre\bin\server
I tried running the file java5w.exe, but I got an error message:
Access is denied
Unable to open the service tomcat5
Thne I managed to open it by "rua as administrator".
the Java Virtual Machine path is points to the java 1.5 version folder.
Is it possible that the reason that the service can't start is related to administrator rigts??
In the properties in the Integration Service (services.msc):
It is set to be run with the local system account.
all other properties looks fine.
in the properties of the tomcat5.exe (and tomcat5w.exe , I tried both)
In the Compatibility tab I tried setting the flag "Run this program in compatibility mode for" to Vista, windows 7, and server 2008
I didn't have the option of Windows XP.
I have also set the Privilege level of: "Run this program as administrator" to true.
But still the service won't start.
What can be the problem?
What else can I check?
Thanks a lot,
Chana

Error while starting SAP NetWeaver Developer Studio

Hi,
I have installed Java SDK (v1.4.2_09) and Netwearver development
studio (2.0.13) on my laptop.When i try to lanch the development studio
i get an error, (!MESSAGE Exception launching the Eclipse Platform:).
Please see the error log for the details.
Please help!
Regards
Fatima
!SESSION Aug 15, 2005 14:44:56.32 -
java.version=1.4.2_09
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Command-line arguments: -os win32 -ws win32 -arch x86 -feature com.sap.java.ide -consolelog -debug C:\j2sdk1.4.2_09\bin\java.exe
-Xmx512m
-Xms128m
-XX:PermSize=32m
-XX:MaxPermSize=128m
-DallUserDir='C:\Documents and Settings\All Users\Application Data'
-cp C:\Program Files\SAP\JDT\eclipse\SapStartup.jar com.sap.ide.eclipse.startup.Main
-os win32
-ws win32
-arch x86
-feature com.sap.java.ide
-showsplash C:\Program Files\SAP\JDT\eclipse\SapIde.exe -showsplash 600
-consolelog
-debug -data C:\Documents and Settings\shahpurf\Documents\SAP\workspace -install file:C:/Program Files/SAP/JDT/eclipse/
!ENTRY Startup 1 0 Aug 15, 2005 14:44:56.32
!MESSAGE Sap NetWeaver Developer Studio - Build: 200507190119
!SESSION -
!ENTRY org.eclipse.core.launcher 4 0 Aug 15, 2005 14:44:56.262
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:286)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:795)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:602)
Caused by: java.lang.reflect.InvocationTargetException
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     ... 7 more
Caused by: java.lang.NumberFormatException: For input string: ""
     at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
     at java.lang.Integer.parseInt(Integer.java:489)
     at java.lang.Integer.parseInt(Integer.java:518)
     at com.tssap.config.ProxySettings.parse(ProxySettings.java:184)
     at com.tssap.config.ProxySettings.loadFromPreferences(ProxySettings.java:114)
     at com.tssap.config.Startup.runBeforeWBStartup(Startup.java:39)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:65)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     ... 8 more

Hi,
I got this solution from SAP and it worked.
This is a known problem that appers due to an implementation bug,
while trying to read the proxy information. The studio expects non-
empty value for key com.tssap.config/proxy, located in
[YourDevStudioInstallationPath]\eclipse\plugins\com.sap.java.ide\pl
ugin_customization.ini file. During the installation no value is
assigned to this key (as you mentioned - no proxy in your case). The
problem will be fixed for SP14, however there is a workaround:
1. Change the value for key com.tssap.config/proxy in
plugin_customization.ini to something like this - proxy:80.
2. After this change the DevStudio should start and you'll be able to
configure your proxy settings from Menu Window->Preferences-
>Workbench->Proxy Settings. (In your case - disable the proxy
server)

Getting error while starting SAP service "SAP SID _01" in ECC 6.0

Hi All,
While starting the SAP<SID>_01 service I am getting the following error :
"The SAP<SID>_01 service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion."
We have ECC6.0, OS Windows 2003 and databse oracle 10.2.
Could you please let me know why this error is coming and solution?
Thanks in advance.
Thanks,
Harish

Hi Harish,
Can you check and copy log from Control Panel-> Administrative Tools->Event Viewer -> Application Log and System log.
Regards,
Payal Patel

Error in starting SAP application

Similar Messages

Maybe you are looking for