Error in Using Generic Data Source

Hi,
I have created a generic data source which uses a function module and replicated in the same system for testing. Now when I try to create a infopackage and load data into PSA, I am getting a short dump. Please help me out as I am very new to this.

Hi,
in order to get some help you need to provide the information of the short dump as it can have multiple reasons. So please give us a more detailed error description.
regards
Siggi

Similar Messages

Delta using generic data source

Hi experts !
How can i create a delta using generic data source ? i am using BW 7.0.
Thanks.

Dear FABRICIO VAZ DE SOUZA ,
Generic extraction
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
step by step procedure for generic extraction delta
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Refer:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Hope it helps you,Revert me back if you have any queries
Assign points if helpful
Regards
Bala

Code Page Setting while extracting data using Generic Data Source

Hi,
Can anybody tell me about the Code Page setting used in Generic Data Source in SAP BW 3.5?
I am extracting data from a Master Table using Generic data Source, but the data which is in Ukrane language is getting loaded as "#". Where do we set the Code Page for it?
Regards,
YK.

To continue with earlier question, is there any particular setting for a master data, to load non english data as a text of master data?
I want to load TEXT of a master in Ukraine language. I am extracting this text from the P table of same master (From Description Field). But TEXT is not getting populated whenever it is Ukraine language. English TEXT is populated correctly.
Please share your experiences...
Thanks,
YK.

Problem during extraction using generic data sources

Hi
While performing extraction(master data) using generic data sources I am getting a problem.
while selecting application component, I am unable to find SD to select it.What should I do?
I selected CRM as application component and did the extraction , it is successful.
But what about if we want to select SD? I am guessing it as an installation problem ... Anyone plz help me
Thank you
Deepthi

Hi Deepthi,
Looks like the RFC connection between source system and BW system is broken..
Contact your basis team to check the connection what went wrong.
once the connection is re-established you can gohead ...
Try out this procedure
Type Transaction SM59.
a.) Open the RFC Destinations.
b.) Find your Source System and double click on it.
c.) Technical setting should contain information regarding your source
system
d.) Logon Information should contain source system client and name &
password for you remote logon.
**Suggestion : our remote name for our R/3 was ALEREMOTE. We use
BWREMOTE so that we can monitor without confusion.
e.) Execute your 'Test Connection' & 'Remote Logon'. You connection
should be You should NOT be prompted for a password.
f.) Repeat above to verify RFCs for other systems
regards
KP
Edited by: KP on Dec 14, 2009 12:11 PM

Error while creating Generic data source using FM

Hi Experts,
I try to create a generic data source using the Function Module via the transaction RSO2. I got the following error messages.
" Das Einheitenfeld CURR des Feldes ZPKZA1 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
" Das Einheitenfeld CURR des Feldes ZPKZA2 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
" Das Einheitenfeld CURR des Feldes ZPKZA10 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
"The unit field CURR of the field ZPKZA1 of the DATA SOURCE ZBWN_DS_POLPOSP is not visible/ stopped/ hide".
for all 10 fields of type CURR.
How shall i handle this issue..........any suggestions please........
thanks in advance
cheers
sailekha

Hi,
Are your CURR fields refereded to a currency field of your structure?? Maybe the problem is that the field containing the currency is refered to other table/structure and it has to be one of your structure fields.
Hope this helps,
Regards,
Carlos.

Error while testing Generic Data Source extraction

I've created generic data source for Texts and Attributes in R/3 based on VIEW (Z table)
I get error "Error 6 in function module RSS_PROGRAM_GENERATE" while trying to test the data sources through RSO2
I guess there can be a lot of reasons... Please name me anybody who knows them...
thanx in advance

Hi,
Please Check the OSS note 328948 and it provides solution to same error what you have. Additionally you can have a look into this OSS note 705212 too.
Syntax error in the generated extraction program Symptom
You notice the error by one of the following symptoms:
The loading of transaction data from an R/3 system terminates with a syntax error in the generated extraction program. The monitor displays the error messages:
R3027 "Error & during the generation of the data transfer program"
RSM340 "Error in the source system"
The extraction within the extractor checker terminates with error message RJ028 "Error 6 in function module RSS_PROGRAM_GENERATE".The activation of transfer rules ends in BW with error message RG102 "Syntax error in GP$ERR$, row... (-> long text)" from the source system. Usually, the diagnosis in the long text of the error message is: "...could not be interpreted. Possible error causes: Incorrect notation or... "
Other terms
OLTP, extractor, data extraction, DataSource, Service API, SAPI,
R3 027, R3 27, RSM 340, RJ 028, RJ 28
Reason and Prerequisites
The error only occurs in the source system, if this contains Basis Release 3.1I and Service API (SAPI) 3.0C Support Package 6. SAPI 3.0C Support Package 6 is contained, for example, in PI 2003.1 Support Package 7 (see attached composite SAP note 673002).
Solution
To correct the problem you need service API 3.0C Support Package 7 in the affected source system. The attached composite SAP note 704971 explains in which software components service API 3.0C is contained, and what the corresponding Support Packages of these components are.
Alternatively, you can also copy the advance correction from the appendix.
Hope it helps.
Regards

Error - When Activating Generic Data source in BW DEV

Hi,
I am working in BI 7.0
I created a Generic Data source
I had checked in RSA3 , it is showing records too.
i replicated the Datasource in BW
Datasource is available in BW
Then I try to activated the Datasource
because
when i try to create tranformation for the data source then
It will show this message (and transformation is not created)
Source RSDS ZCOPC_C10 GDVCLNT110 does not exist
My Data source name is ZCOPC_C10 for source system GDVCLNT110
then I will try to Activated the Data source First
then also it will show the Error like this
Post Processing/Checking the Activation for DataSource ZCOPC_C10 GDVCLNT110
&
Error when activating DataSource ZCOPC_C10 GDVCLNT110
and the
DataSource ZCOPC_C10 (GDVCLNT110) could not be activated
can some body help me to solve this problem
sure you can get the points
Thanks
prasanna

Hi Oscar,
The Data source is not Active in BW, I had checked in Data source defination.
when I activate the Data source .
I received the Message / Error
Activation of Objects with Type DataSource
Saving Objects with Type DataSource
Internal Activation (DataSource )
Preprocessing / Creation of DDIC Objects for DataSource ZCOPC_C11 GDVCLNT110
Save DDIC object /BIC/CAZCOPC_C000020000001 (Application Structure for ZCOPC_C11 GDVCLNT110)
Save DDIC object /BIC/WCAZCOPC_C000020000001 (Application Structure for ZCOPC_C11 GDVCLNT110 - T)
Save DDIC object /BIC/CAZCOPC_C00002000 (Segment Structure for ZCOPC_C11 GDVCLNT110 - Appli)
Save DDIC object /BIC/CCZCOPC_C000020000001 (Character Structure for ZCOPC_C11 GDVCLNT110)
Save DDIC object /BIC/WCCZCOPC_C000020000001 (Character Structure for ZCOPC_C11 GDVCLNT110 - Tab)
Save DDIC object /BIC/CCZCOPC_C00002000 (Segment Structure for ZCOPC_C11 GDVCLNT110 - Chara)
Save DDIC object /BIC/B0001051 (PSA for ZCOPC_C11 GDVCLNT110 Itemization)
Writing of object catalog entries (TADIR)
Object TABL /BIC/CAZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TTYP /BIC/WCAZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TABL /BIC/CAZCOPC_C00002000 written to the ObjectCatalog (TADIR)
Object TABL /BIC/CCZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TTYP /BIC/WCCZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TABL /BIC/CCZCOPC_C00002000 written to the ObjectCatalog (TADIR)
Activate all Dictionary objects ( 6 ):
All DDIC objects have been activated / deleted
Post Processing/Checking the Activation for DataSource ZCOPC_C11 GDVCLNT110
Error when activating DataSource ZCOPC_C11 GDVCLNT110Deletion of Unused Dictionary Objects ( 6)
All DDIC objects have been activated / deleted
Deletion of Object Catalog Entries (TADIR)
Object TABL /BIC/CAZCOPC_C000020000001 deleted from TADIR
Object TTYP /BIC/WCAZCOPC_C000020000001 deleted from TADIR
Object TABL /BIC/CAZCOPC_C00002000 deleted from TADIR
Object TABL /BIC/CCZCOPC_C000020000001 deleted from TADIR
Object TTYP /BIC/WCCZCOPC_C000020000001 deleted from TADIR
Object TABL /BIC/CCZCOPC_C00002000 deleted from TADIR
All unused DDIC objects have been deleted
Thanks
prasanna

More than one field in generic data source

Hi All,
We wanted extract Allocation data for the sales order from R/3 to BW. I am not able to find proper data source for it... there are two datasources..we wanted afs specific datasource
2LIS_11_V_ITM : Sales-Shipping Allocation Item Data
2LIS_11_V_SCL : Sales-Shipping Allocation Schedule Line
But its not reflecting allocated quantity at all...
So we decided to create generic data source.. but there is one problem for some allocation ARUN is initial.. so i cann't use ARUN as delta field... can i use comination of Sales order no,Item and Schedule line number as delta field....
Because in RSO2 i can define only one field as delta specific field....
How to proceed ???
Regards,
Viren.

Hi,
If you decided to use generic data source, make sure that, U'll have to take only
one filed as a delta, I suggest, you take any date field rather than the value fields
it may be created date/change date and so on so forth..
Regards,
Pattan.

Generic Data Source delta is not extracted

Hi,
There is a problem in extracting the delta records using Generic Data Source. Delta records ( New / Modified records ) are not posted in the RSA7.
I'll Explain you the Scenario I have done. Created a generic data source in R/3 using view. In the view there is a field Sales Order No. I have enabled the delta update for this field. In the generic delta i have chosen delta type as Numeric pointer.
Extracted the entire record using full update and after initializing the Delta, it extracts the delta record well ie. it only extracts the sequence of Sale Order No. First I extracted nine records(i.e 10001 to 10009) using full update. again I entered a record in underlying table with sale order no as 10011-10013. It extracts those records into BW system. Then again I made an entry in the table with sales order no 10010. But the record is not extracted. Even though I tried of specifying safety lower limit as -3. Still it not extracting the record(10010).
And what if I posted a value of sale order 10014 with the same. what should I do?? Help on this plz.
--Durai.S

Hi SVS,
Thanks for your reply.
I followed this in my scenario. But I don't understand why it is not extracting? even I specified the safety limit of upper and lower values in the generic delta.
Here the below explanation shows that the delta record can be extracted even if the pointer value is greater than the posted value.
Numeric pointer (last extracted value 10011; Data in underlying table (Max value = 10025) )
Data would be extracted from a min-value of 10010 (lower limit adjusts the last counter 10011 by specified value u2013 1)
max-value of 10020 (after adjustment for upper safety limit u2013 by 5). The current pointer would now indicate 10020 in
RSA7.
--Durai.S

Generic Data Source with Function Module data mismatch in BI

Hi All,
I'm using Generic Data Source with Function Module, When I execute the Function Module (Which I have Created), I'm getting 16000 records and when run extractor(in RSA3) im getting different no.of records(infact they are more no.).
when I run the InfoPackage in BI im Getting more no. of records than what i got executing the function module..
and single record is divided into 2 records in BI side(not all the records), how can it be possible???
is there anything Im missing to explain you my issue???
if understood please help me out.
Thanks n Regards,
ravi.

the datasource frame work starts the function module several times.
1. the initialization
2. the serval times, until you "raise no_more_data".
check you coding: have you refreshed necessary internal tables.
Sven

Generic Data Source with Function Module data mismatch

Hi All,
I'm using Generic Data Source with Function Module, When I execute the Function Module (Which I have Created), I'm getting 16000 records and when run extractor(in RSA3) im getting different no.of records(infact they are more no.).
when I run the InfoPackage in BI im Getting more no. of records than what i got executing the function module..
and single record is divided into 2 records in BI side(not all the records), how can it be possible???
is there anything Im missing to explain you my issue???
if understood please help me out.
Thanks n Regards,
ravi.

HI rkiranbi,
1. FIrst you excute function module according to your paramers, you will get some records. then goto tcode RSA3 --> excute
Provide your Data source name and under setting we have options like Data records/calls, Display extractor calls and selections --> fields .
in that options you have to increase the values. and then you have to pass paramers in RSA3 according to your function module
selections in SE37. Now you will get equal values in both functin module selection and RSA3 Selection. if it fail means you need to
check coding logic in function module.
2. if your are getting wrong values in BI System then check with
              1. compare with PSA data and data target data (here you need to check with characterstic as well as keyfigures)
              if you find any mistake you need change the coding in function module according to client requirement.
              2. compare data with RSA3 and bi report data or data target data.
                             check it properly above steps, you will get solution.
thanks and regards,
malli

Error While Creating The Generic Data Source.

Hi Gurus,
I am trying to create a Generic Data Source (ZGG_TEST) on a View (ZV_TEST1)
View as Follows:
Table1 has the Following Fields
Field Type
MANDT CLNT
RECNO NUMC
STATUS CHAR
LMODF CHAR
Table2 has Fields
Fields Type
MANDT CLNT
RECNO NUMC
PHCOS QUAN
MATNR CHAR
EQSFS QUAN
MEINS UNIT
In Table2 under Currency and Quantity Field tab
For Field PHCOS The Reference table is MSEG and Reference Field is MEINS
For Field EQSFS the Reference Table is MSEG and reference field is MEINS
View Description
Tables:
Table1
Table2
MSEG
Join condition For the View is
TABLE2-MANDT=TABLE1-MANDT
TABLE2-RECNO=TABLE1-RECNO
TABLE2-MANDT=MSEG-MANDT
TABLE2-MATNR=MSEG-MATNR
The Problem is While saving the Data Source it is Giving an Error as Follows
Invalid extract structure template ZV_TEST1 of DataSource zgg_test
Message no. R8359
Diagnosis
You tried to generate an extract structure with the template structure zgg_test. This operation failed, because the template structure quantity fields or currency fields, for example, field PHCOS refer to a different table.
Procedure
Use the template structure to create a view or DDIC structure that does not contain the inadmissible fields.
Please help me In Solving this Issue
Thanks in advance
Santosh

n Table2 under Currency and Quantity Field tab
For Field PHCOS The change Reference table to TABLE2 For Field EQSFS the change the Reference Table to TABLE2
ref field MEINS ...
This works ..
Priya
Edited by: Priya on Dec 31, 2007 1:30 PM

Generic Data Source Error

Hi
when i want to create a Generic data source for T001S table by using the Extraction from View.
when i saved it is thorowing Error Pool or Cluster Table is not allowed.
Please let me know how i can create data source for Pool or cluster table.
question 2   how i can create data source from Extraction from Query.
how i can create Infoset Query.
Regards
Atul
Moderator message: BI related, please ask in the appropriate forum.
Edited by: Thomas Zloch on Oct 27, 2010 6:12 PM

Hi,
first go to ROOSFIELD and
NEter your datasource name in oltpsource and check your field BPRME. what is its status in Selection.
You have to make it 'X'.
For that,You need to create an ABAP program in se38 and execute the attached code.
update roosfield
set selection = 'X'
where oltpsource = V_PROD_TRADE
and   field      = BPRME
and   selection = 'A'
and   objvers    = 'A'.
Hope i m clr.
Regards,
San!

Error while doing DELTA Extraction (generic data source)

Hi BW Experts,
In my R/3, I have a generic data source ZBUT_VW.
It receives data from a View which is created based on couple tables.
When I do full load to the corresponding ODS, it is successful.
But after that I delete the ODS and created CUBE with DELTA
I have Initialized delta.
When I do DELTA extraction, it fails.
The error The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
I delete the initialization load and trying to do DELTA extraction again and it Fails.
With the same error
Please let me know how can I resolve this problem.
URGENT
gaurav

I dont think it is possible to have to additive delta with creation date.
Try a full load to cube to check if the extractor is working.

Error while importing the tables from MySQL using the data source connection

Hi,
I am trying to import tables from MySQL into Powerpivot using the data source connection, if use the import using the Query option its working fine but not with the select list of table option.
when i click on the select list of tables option, i get the below error after selecting all the tables to be imported:
OLE DB or ODBC error.
An error occurred while processing table 'XXXXXXXXXX'.
The current operation was cancelled because another operation in the transaction failed.

Hi Bharat17an,
Please provide the detail information when create the MySQL connection in your PowerPivot model. Here is a good article regarding "how to Use MySQL and Microsoft PowerPivot Together" for your reference, please see:
http://www.datamensional.com/2011/09/how-to-use-mysql-and-microsoft-powerpivot-together-2/
If this issue still persists, please help to collection windows event log information. It maybe helpful for us to troubleshoot this issue.
Regards,
Elvis Long
TechNet Community Support

Error in Using Generic Data Source

Similar Messages

Maybe you are looking for