Error Limit for Datastores

I have a datastore on which I intend to put some static validations. I will be putting this datastore in a package for datastore checking and want to set an error limit for the the number of validation errors which occur. Can this be set somewhere?
My scenario is I have datastores A, B, C etc. In my package I initially want to do datastore checking of A then of B and then of C and so on. In between all these if the number of errors is exceeded (some constant.. say 100) then I want to exit at that point.
I had read that in interfaces maximum number of errors allowed can be set and was wondering if something similar could be done in packages.

But then will be necessary finish all process to compare.
If he customize the CKM he can improve the process time.
Imagine a process that, for some reason, is getting all records with errors and has more than 1.000.000 records. With a KM customization he will stop it at the first 100 then he will avoid to "loose" process time.
However if all process are fast and small then CTS process will be better because is easier to implement.
Just to contribute! :D

Similar Messages

In original Budget crossing the limit for a particular order no error procd

Hi
In budget where the amount exceeds the original budget without showing any error message for budget exceeding. for example order no:xxxx amt 100000 and posting amt 200000 without error system proceeding. But generally system don't allow if we crossing the limit for a budget. here there is no error. I have to make it to appear error. Any solution is to rectify..
Thank u

Ya I am using Transaction group ++ and i am not using any exempt cost element. In quality its working if budget exceeding its showing error properly not alowing to post. Bust in production its not showing any if budget crossed limit allocation.
Its showing in ko23 : eg Budget 2012:23000, Current budget 2012:23000, Assigned 25000
I dont know why its like that in production. Please give me any idea whether any problem in order
But its working good in quality not in production. I checked starting to end all configuration.
Please give all idea as soon as possible.

In perfdatasource querying for global snapshot failed with error 'the size limit for this '

I received scom alerts from two win 2k8 r2 servers , hosting exchange 2010 mailbox roles , the alerts came almost in same time from both servers ,
can I ignore those alerts
or can someone give a me a clue how can I troubleshoot those alert , please any help would be appreciated
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
from Ops-mgmt logs
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 1
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.OperatingSystem.PercentMemoryUsed.Collection
Instance name: Microsoft Windows Server 2008 R2 Enterprise
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 1
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.LogicalDisk.PercentIdle.Collection
Instance name: " edb file path "
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 2
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.NetworkAdapter.CurrentBandwidth.Collection
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 2
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.ForefrontProtection.FPE.Server.PerformanceCollection.RealtimeScanMessageRate

Hi Blake ,
Thanks for your reply , I appreciate your help ,
I didn't put the alert from scom console because they were same as the events ( same source )
Health Service Modules, I didn't want to spam
more :-)
also the two servers encountered the issue were mailbox servers and part of same DAG , it worth mention the alert were resolved
by Exchange 2010 Correlation Engine service
http://blogs.technet.com/b/kevinholman/archive/2010/10/15/clustering-the-exchange-2010-correlation-engine-service.aspx
http://support.microsoft.com/kb/2592561
also the Opsmgmt logs are full of waring and error event like 2023 , 21402 , 21403 , 1207 !!
Log Name: Operations Manager
Source: HealthService
Date:
Event ID: 2023
Task Category: Health Service
Level: Warning
Keywords: Classic
User: N/A
Computer: server 1
Description:
The health service has removed some items from the send queue for management group "SCOM" since it exceeded the maximum allowed size of 15 megabytes.
1- alert from console >>
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.OperatingSystem.PercentMemoryUsed.Collection
Instance name: Microsoft Windows Server 2008 R2 Enterprise
EventSourceName: Health Service Modules

ASR9000/XR - BNG - L3 sub-interface limit for trunk (4096) error - what is the work around?

We currently have 7,500 broadband subscribers that we will be terminating on our ASR 9001.
Each one of our customers will be terminating on a sub-interface on a bundle.
On the 9k, there will be a QoS policy applied to rate-limit their broadband connection (see example below).
The challenge that we are running into right now is scaling beyond 4096 L3 sub-interfaces. When running through this in our lab, we receive the following fail message:
RP/0/RSP0/CPU0:BNG(config-subif)#show config failed
Tue Mar 10 18:32:07.552 UTC
!! SEMANTIC ERRORS: This configuration was rejected by
!! the system due to semantic errors. The individual
!! errors with each failed configuration command can be
!! found below.
interface Bundle-Ether10.6941171
!!% The L3 sub-interface limit for the trunk interface has been reached: Trunk limit for L3 subinterfaces on Bundle-Ether10 is 4096
We have added the following on to each of the sub-interfaces to "fake" out the NPU, but even with SPD configured, we are receiving the max 4096 message:
service-policy output <POLICY> subscriber-parent resource-id 0
service-policy output <POLICY> subscriber-parent resource-id 1
service-policy output <POLICY> subscriber-parent resource-id 2
service-policy output <POLICY> subscriber-parent resource-id 3
It is my understanding that we have a total of 4 resource ID's to use (0-3) and the ASR 9001 will support up to 32,000 sub-interfaces (system wide or 8,000 sub interfaces per resource-id).
See attached image for reference this design.
Main question to the community is what is the work around to scale beyond 4096 L3 sub-interfaces??
In our case it is not feasible to bring in additional bundles and spread the customers out.
Look forward to your responses.
Below is a sample configuration:
policy-map 10M_D
class class-default
shape average 10100000 bps
end-policy-map
policy-map 10M_U
class class-default
police rate 10300000 bps
exceed-action drop
end-policy-map
interface Bundle-Ether10.650102
description ---INT: GigabitEthernet0/0/1.650102 NAME: TEST #1---
service-policy input 10M_U
service-policy output 10M_D subscriber-parent resource-id 0
ipv4 point-to-point
local-proxy-arp
ipv4 unnumbered Loopback10
encapsulation dot1q 650 second-dot1q 102
interface Bundle-Ether10.650103
description ---GigabitEthernet0/0/1.650103 NAME: TEST #2---
service-policy input 10M_U
service-policy output 10M_D subscriber-parent resource-id 1
ipv4 point-to-point
local-proxy-arp
ipv4 unnumbered Loopback10
encapsulation dot1q 650 second-dot1q 103
interface Bundle-Ether10.650104
description ---INT: GigabitEthernet0/0/1.650104 NAME: TEST #3---
service-policy input 10M_U
service-policy output 10M_D subscriber-parent resource-id 2
ipv4 point-to-point
local-proxy-arp
ipv4 unnumbered Loopback10
encapsulation dot1q 650 second-dot1q 104
interface Bundle-Ether10.650105
description ---INT: GigabitEthernet0/0/1.650105 NAME: TEST #4---
service-policy input 10M_U
service-policy output 10M_D subscriber-parent resource-id 3
ipv4 point-to-point
local-proxy-arp
ipv4 unnumbered Loopback10
encapsulation dot1q 650 second-dot1q 105
interface Bundle-Ether10.650106
description ---INT: GigabitEthernet0/0/1.650106 NAME: TEST #5---
service-policy input 10M_U
service-policy output 10M_D subscriber-parent resource-id 0
ipv4 point-to-point
local-proxy-arp
ipv4 unnumbered Loopback10
encapsulation dot1q 650 second-dot1q 106
interface Bundle-Ether10.650107
description ---INT: GigabitEthernet0/0/1.650107 NAME: TEST #6---
service-policy input 10M_U
service-policy output 10M_D subscriber-parent resource-id 1
ipv4 point-to-point
local-proxy-arp
ipv4 unnumbered Loopback10
encapsulation dot1q 650 second-dot1q 107
interface Bundle-Ether10.650108
description ---INT: GigabitEthernet0/0/1.650108 NAME: TEST #7---
service-policy input 10M_U
service-policy output 10M_D subscriber-parent resource-id 2
ipv4 point-to-point
local-proxy-arp
ipv4 unnumbered Loopback10
encapsulation dot1q 650 second-dot1q 108
interface Bundle-Ether10.650109
description ---INT: GigabitEthernet0/0/1.650109 NAME: TEST #8---
service-policy input 10M_U
service-policy output 10M_D subscriber-parent resource-id 3
ipv4 point-to-point
local-proxy-arp
ipv4 unnumbered Loopback10
encapsulation dot1q 650 second-dot1q 109

xander,
Thanks for sharing the QinQ username, works perfectly.
couple of design questions for you.
#1 - If i have >7500 subscribers that will be terminating on this bundle, would this be the best design to ensure that i can scale up to 32,000 subscribers on the BE <leveraging the subscriber-parent resource-id (0-4)>
EXAMPLE
interface Bundle-Ether10.100
description BE10.100 – Area 1 - BNG customers - QinQ
ipv4 point-to-point
ipv4 unnumbered Loopback0
service-policy output <POLICY> subscriber-parent resource-id 0
service-policy type control subscriber IP_PM
ipsubscriber ipv4 l2-connected
initiator dhcp
encapsulation ambiguous dot1q 100 second-dot1q any
interface Bundle-Ether10.200
description BE10.200 – Area 2 - BNG customers - QinQ
ipv4 point-to-point
ipv4 unnumbered Loopback0
service-policy output <POLICY> subscriber-parent resource-id 1
service-policy type control subscriber IP_PM
ipsubscriber ipv4 l2-connected
initiator dhcp
encapsulation ambiguous dot1q 200 second-dot1q any
interface Bundle-Ether10.300
description BE10.300 – Area 3 - BNG customers - QinQ
ipv4 point-to-point
ipv4 unnumbered Loopback0
service-policy output <POLICY> subscriber-parent resource-id 3
service-policy type control subscriber IP_PM
ipsubscriber ipv4 l2-connected
initiator dhcp
encapsulation ambiguous dot1q 300 second-dot1q any
interface Bundle-Ether10.400
description BE10.400 – Area 4 - BNG customers - QinQ
ipv4 point-to-point
ipv4 unnumbered Loopback0
service-policy output <POLICY> subscriber-parent resource-id 4
service-policy type control subscriber IP_PM
ipsubscriber ipv4 l2-connected
initiator dhcp
encapsulation ambiguous dot1q 400 second-dot1q any
#2 - How do I verify in XR the CoA speed profile that is pushed down from RADIUS to a given subscriber?
I thought I might see the dynamic policy using the command below, but no luck.
Do you know the correct command?
RP/0/RSP0/CPU0:bng-asr9001#show policy-map inter be10.1.ip5
Wed Apr 1 14:12:06.390 UTC
Bundle-Ether10.1.ip5 input: __sub_55ffffff8b7dffffffad
Class class-default
Classification statistics (packets/bytes) (rate - kbps)
Matched : 126959/10831088 14
Transmitted : N/A
Total Dropped : N/A
Policy __sub_55ffffff8b7dffffffad_child1 Class class-default
Classification statistics (packets/bytes) (rate - kbps)
Matched : 126959/10831088 14
Transmitted : N/A
Total Dropped : 325/322582 0
Policing statistics (packets/bytes) (rate - kbps)
Policed(conform) : 126634/10508506 14
Policed(exceed) : 325/322582 0
Policed(violate) : 0/0 0
Policed and dropped : 325/322582
Policed and dropped(parent policer) : N/A
Bundle-Ether10.1.ip5 output: __sub_6effffff81ffffffbfffffffdb
Class class-default
Classification statistics (packets/bytes) (rate - kbps)
Matched : 199642/280153690 453
Transmitted : N/A
Total Dropped : N/A
Policy __sub_6effffff81ffffffbfffffffdb_child1 Class class-default
Classification statistics (packets/bytes) (rate - kbps)
Matched : 199642/280153690 453
Transmitted : N/A
Total Dropped : 26930/38989025 61
Policing statistics (packets/bytes) (rate - kbps)
Policed(conform) : 172712/241164665 392
Policed(exceed) : 26930/38989025 61
Policed(violate) : 0/0 0
Policed and dropped : 26930/38989025
Policed and dropped(parent policer) : N/A
RP/0/RSP0/CPU0:bng-asr9001#
#3 - CoA QoS profile -> I'm using the following avpair for ingress / egress qos. However when validating against a speed test server, my results are well above the 10Mbps / 10Mbps I have provisioned. Actual is more of in the ~15Mbps/15Mbps range.
Am I missing additional config in the policing section?
cisco-avpair = "ip:qos-policy-in=add-class(sub, (class-default,class-default),police(10000))",
cisco-avpair += "ip:qos-policy-out=add-class(sub, (class-default,class-default),police(10000))"
Appreciate it in advance xander!
-ae

0FIA_DS11:Error when activating DataStore Object

Hi,
We have activated the datasources related FI_AA and replicated in to a new BI 7 system.
Currently we are able to activate the asset accounting related targets like 0FIAA_C11, 0FIAA_c12 and 0FIAA_C13
however not able to activate DSO's 0FI_DS11, 0FI_DS12 and 0FI_DS13.
We have replicated the datasources 0FI_AA_11 and 0FI_AA_12 in 3.x but while installing the DSO 0FI_DS11 and 0FI_DS12, facing below given error.
" DataSource 80FIA_DS11 does not exist in source system BIDCLNT600 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIA_DS11 "
We have checked the mysource system settings and activated the Data Marts respectively but still we are not able to activate.
System is BI 7 with EHP4 ehanced packege.
Please suggest.
Thanks & Regards,
SMS

Hi Jonas,
I understand the procedures and had followed all the procedures.
We had resolved the issue and issue was with the IP in sm59.
It is cleared.
Thanks for the reply.
Regards,
S M S

Error when activating DataStore Object

Hello,
We have an ODS object which is in avtive stage in ECC DEV system. When
we transport it to ECC QA system it can not be activated and shows
follwoing errors :
1) Internal error occurred when writing
Message no. D0054
2) Error while saving change log for DataStore object DSO_PL
Message no. RSDODSO196
3) Error during creation of DDIC sources of DataStore Object DSO_PL
Message no. RSO435
4) Error when activating DataStore Object DSO_PL
Message no. RSO404
We also observe that even we create new ODS object in ECC QA system,
still it give the same errors while activating.
Note - ECC QA is a system copy of ECC PROD.
Please suggest.

Hi,
I believe the problem is with the Myself connection (the BW source system connection to itself) in the QA system.
Please goto RSA1, 'source systems', right click on the myself system and click on 'check', if there are errors you
maybe able to correct them by right clicking on the myself connection and click on 'restore'. If there are no
errors for the myself connection you should go to sm59 and do the connection and authorization test for the
RFC connection for the myself connection.
Best Regards,
Des.

I want to set dynamic customer credit limit for a customer

Hi,
I want to set a dynamic credit limit for a customer which should trigger during the time of Sales Order Creation.
Can anyone please let me know the settings one has to do to implement this process in the system ?

Hi Below is the whole process for confign.
1. Transaction OB38
   Check which credit control area is assigned to the company code.
   Company code:
   Credit control area:
2. Transaction OVFL
   Check which credit control area is assigned to the sales area.
   Sales area:
   Credit control area:
3. Transaction XD02 or VD02
   Check which credit control area is assigned to the payer.
   Payer:
   Credit control area:
4. Transaction SE37
   Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
   For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
   OB45, or the credit control area must be entered under the relevant company code in table
   T001CM of the credit control areas allowed.
   Company code:
   Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
   Which settings do exist for the sales document type used?
   Sales document:
   Check credit:
   Credit group:
8. Transaction OVAD
   Which settings do exist for the delivery type used?
   Delivery type:
   Credit group for delivery:
   Credit group for goods issue:
9. Transaction OB01
   Credit management/Change risk category
   Definition of the risk category for each credit control area. This risk category can be
   assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
    Here, the individual credit checks for key fields
    o credit control area
    o risk category
    o credit group are set. Take these key fields from the above settings and go to the detail
      screen. In particular, check whether fields "Reaction" and "Status/block" are set
      correctly. To carry out follow-up actions in case of a credit block, the credit check
      status must be set (field "Status/block").
11. Transaction FD32
    Credit master data for the payer of the relevant document.
    Credit account:
    Credit limit:
    Risk category:
    Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
    check (static or dynamic credit limit check).
13. Transaction OVA7
    Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
    field "Active receivable" in Transaction VOV7.
    Item type:
    Active receivable:
14. Transaction V/08, Pricing
    In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
    determining the credit value (mark the pricing procedure and doubleclick on "Control").
    Usually, the net value plus taxes is used. This way the system is determined to use this
    subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
    update and credit check.
    You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
    Pricing procedure:
    Line with subtotal = 'A':
15. Transaction OB45
    Which update group (field "Update") do you use in the relevant credit control area? The
    default setting is "12". If you use another update group, check whether this is fine with
    you. If you open an OSS message, please tell us the alternative update group.
    Credit control area:
    Update:
16. Transaction OMO1
    Which kind of update did you choose for structure S066?
     In any case, "Synchronous update (1)" has to be chosen as the kind of update.
     All other settings will lead to errors.
Regds
MM

How to configure a error queue for weblogic jms topic

Hi guys.
I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
1. using jms transport configure proxy service:
Retry Count :3
Retry Interval:10
Error Destination: ErrorTopic
Expiration Policy: Redirect
I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.
Any suggestions for this topic? Can anyone provide some helps or any useful links.
Thanks in advance.
Mingzhuang

Mingzhuang
I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
1. using jms transport configure proxy service:
Retry Count :3
Retry Interval:10
Error Destination: ErrorTopic
Expiration olicy: RedirectUnlike File/SFTP, JMS proxy service definition does not have the concept of Error Destination. To accomplish similar functionality go to JMSQ on (for which proxy is configured) server console (http://localhost:7001/console) and configure the Error Destination. Following URL will help in how to configure JMS Q.
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueues.html
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueueDeliveryFailure.html
I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.If every thing is configured as per above step, then the after retries, the weblogic server will put the message into JMS topic configured. Your proxy will receive from this topic.
Let me know if we are not on same page.
Cheers
Manoj

ORA-27078: unable to determine limit for open files

I installed Oracle XE on my Gengoooraclexe@ghost ~ $ lsnrctl
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 25-JUN-2011 16:51:29
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 25-JUN-2011 10:03:30
Uptime 0 days 6 hr. 48 min. 1 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ghost.emacs.com)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL>
Poraclexe@ghost ~ $ sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Jun 25 07:19:58 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> show user
USER is "SYS"
SQL> startup
ORA-27078: unable to determine limit for open files
Linux Error: 1: Operation not permitted
Additional information: 1
Additional information: 1
Additional information: -2958340
SQL> startup force
ORA-27078: unable to determine limit for open files
Linux Error: 1: Operation not permitted
Additional information: 1
Additional information: 1
Additional information: -3378372
SQL> startup
ORA-03113: end-of-file on communication channel
SQL> exit
Disconnected

unable to determine limit for open filessee http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm#BABJFAIA
Is that a debian flavored distro?

OBIEE filter/criteria limit for AND/OR operations for a report

Hi
We have a report that has around twenty "OR" criterias and ten "AND" criterias. All the filters are logically correct but report is returning invalid data. However if we reduce some filters then report works fine.
Any ideas of increasing filters limit for a report or reason of the issue.
Umer

Thanks Chaknor,
The report i created would not result any error code/msg.
The only reason i put question here is:
My report has around 50 predicates and is returning data without any respect of the predicates i have applied. However if i reduce some predicates (says reduce them to 20) then my report results correct data.
For the time i tried a work around and created two reports using half of the predicates in one and half in two. but i need everything in one single report.
The most important thing is that when i execute report with 50 predicates, the query i get in NQquery log omits many predicates.
Following is what i get in NQquery log
After removing half of the filters from the report the where clause from the log is given below;
WHERE ( t120650.patient_seq_num = t120867.patient_seq_num
AND t120585.location_seq_num = t120738.location_seq_num
AND t120585.visit_seq_num = t120650.visit_seq_num
AND t120585.provider_seq_num = t120767.provider_seq_num
AND t120650.procedure_seq_num = t121446.procedure_seq_num
AND t120738.practice = 'MSP'
AND t120800.plan_category = 'CORNEL IPA'
AND CASE
WHEN t120650.charge_seq_num = t120650.parent_seq_num
THEN 'NO'
ELSE 'YES'
END = 'NO'
AND t120767.provider <> 'SANDH,OLD'
AND t120767.provider <> 'GRANSR,OLD'
AND t120767.provider <> 'GRANATO,SR'
AND t120767.provider <> 'SANDHAUS,J'
AND t120767.provider <> 'AARONS,OLD'
AND t120767.provider <> 'DYBNER,OLD'
AND t120767.provider <> 'GRANJR,OLD'
AND t120767.provider <> 'AAR-DYBNER'
AND t120767.provider <> 'SUBIETAS,A'
AND t120767.provider <> 'TILLEM,OLD'
AND t120767.provider <> 'WEBER,OLD'
AND t120767.provider <> 'WOLGEL,C'
AND (t120800.insurance IN
('ACSHEALTHN', 'AETNA', 'CIGNA', 'HIPNY', 'NYBCEMP')
AND ( t120800.insurance IN ('AETNA', 'HIPNY')
OR t120585.visit_date >= TIMESTAMP '2010-04-20 00:00:00'
AND ( t120800.insurance IN ('HIPNY')
OR t120585.visit_date >= TIMESTAMP '2010-04-20 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-08-01 00:00:00'
AND ( t120767.provider IN
('AARONSON', 'DYBNER,R', 'GRANATO,JR', 'TILLEM,S',
'WEBER,M')
OR t120800.insurance IN ('AETNA')
OR t120585.visit_date >= TIMESTAMP '2010-04-20 00:00:00'
AND ( t120800.insurance IN
('ACSHEALTHN', 'CIGNA', 'HIPNY', 'NYBCEMP')
OR t120585.visit_date >= TIMESTAMP '2010-08-01 00:00:00'
AND ( t120767.provider IN
('AARONSON', 'DYBNER,R', 'GRANATO,JR', 'TILLEM,S',
'WEBER,M')
OR t120800.insurance IN
('ACSHEALTHN', 'AETNA', 'CIGNA', 'NYBCEMP')
AND ( t120767.provider IN
('AARONSON', 'DYBNER,R', 'GRANATO,JR', 'TILLEM,S',
'WEBER,M')
OR t120800.insurance IN ('ACSHEALTHN', 'CIGNA', 'NYBCEMP')
OR t120585.visit_date >= TIMESTAMP '2010-08-01 00:00:00'
AND ( t120767.provider IN
('DYBNER,R', 'GRANATO,JR', 'TILLEM,S', 'WEBER,M')
OR t120800.insurance IN
('ACSHEALTHN', 'AETNA', 'CIGNA', 'NYBCEMP')
OR t120585.visit_date >= TIMESTAMP '2010-04-01 00:00:00'
AND ( t120767.provider IN
('DYBNER,R', 'GRANATO,JR', 'TILLEM,S', 'WEBER,M')
OR t120800.insurance IN ('ACSHEALTHN', 'CIGNA', 'NYBCEMP')
OR t120585.visit_date >= TIMESTAMP '2010-04-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-08-01 00:00:00'
AND ( t120767.provider IN ('AARONSON', 'DYBNER,R')
OR t120585.visit_date >= TIMESTAMP '2010-04-20 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-08-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2011-01-01 00:00:00'
AND ( t120767.provider IN
('AARONSON', 'DYBNER,R', 'GRANATO,JR', 'TILLEM,S',
'WEBER,M')
OR t120585.visit_date >= TIMESTAMP '2010-04-20 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-08-01 00:00:00'
AND ( t120767.provider IN ('DYBNER,R')
OR t120585.visit_date >= TIMESTAMP '2010-04-20 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-04-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-08-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2011-01-01 00:00:00'
AND ( t120767.provider IN
('DYBNER,R', 'GRANATO,JR', 'TILLEM,S', 'WEBER,M')
OR t120585.visit_date >= TIMESTAMP '2010-04-20 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-04-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-08-01 00:00:00'
AND ( t120767.provider IN ('AARONSON')
OR t120585.visit_date >= TIMESTAMP '2010-04-20 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-08-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-10-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2011-01-01 00:00:00'
AND ( t120767.provider IN ('GRANATO,JR', 'TILLEM,S', 'WEBER,M')
OR t120585.visit_date >= TIMESTAMP '2010-04-20 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-04-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-08-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-10-01 00:00:00'
AND ( t120767.provider IN
('AARONSON', 'GRANATO,JR', 'TILLEM,S', 'WEBER,M')
OR t120585.visit_date >= TIMESTAMP '2010-04-20 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-08-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-10-01 00:00:00'
AND ( t120585.visit_date >= TIMESTAMP '2010-04-20 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-04-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-08-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-10-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2011-01-01 00:00:00'
AND ( t120767.provider IN ('AARONSON')
OR t120800.insurance IN ('AETNA')
OR t120585.visit_date >= TIMESTAMP '2010-04-20 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-10-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2011-01-01 00:00:00'
AND ( t120800.insurance IN
('ACSHEALTHN', 'AETNA', 'CIGNA', 'NYBCEMP')
OR t120585.visit_date >= TIMESTAMP '2010-04-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-10-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2011-01-01 00:00:00'
AND ( t120767.provider IN ('AARONSON')
OR t120800.insurance IN ('ACSHEALTHN', 'CIGNA', 'NYBCEMP')
OR t120585.visit_date >= TIMESTAMP '2010-08-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-10-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2011-01-01 00:00:00'
AND ( t120800.insurance IN ('ACSHEALTHN', 'CIGNA', 'NYBCEMP')
OR t120585.visit_date >= TIMESTAMP '2010-04-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-08-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-10-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2011-01-01 00:00:00'
AND ( t120767.provider IN ('DYBNER,R')
OR t120800.insurance IN ('AETNA')
OR t120585.visit_date >= TIMESTAMP '2010-04-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-04-20 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2011-01-01 00:00:00'
AND ( t120800.insurance IN ('AETNA')
OR t120585.visit_date >= TIMESTAMP '2010-04-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-04-20 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-10-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2011-01-01 00:00:00'
AND ( t120767.provider IN ('DYBNER,R')
OR t120800.insurance IN
('ACSHEALTHN', 'AETNA', 'CIGNA', 'NYBCEMP')
OR t120585.visit_date >= TIMESTAMP '2010-04-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2011-01-01 00:00:00'
AND ( t120767.provider IN ('AARONSON', 'DYBNER,R')
OR t120800.insurance IN ('AETNA')
OR t120585.visit_date >= TIMESTAMP '2010-04-20 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2011-01-01 00:00:00'
AND ( t120767.provider IN ('AARONSON')
OR t120800.insurance IN
('ACSHEALTHN', 'AETNA', 'CIGNA', 'NYBCEMP')
OR t120585.visit_date >= TIMESTAMP '2010-10-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2011-01-01 00:00:00'
AND ( t120767.provider IN ('AARONSON', 'DYBNER,R')
OR t120800.insurance IN ('ACSHEALTHN', 'CIGNA', 'NYBCEMP')
OR t120585.visit_date >= TIMESTAMP '2010-08-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2011-01-01 00:00:00'
AND ( t120767.provider IN ('DYBNER,R')
OR t120800.insurance IN ('ACSHEALTHN', 'CIGNA', 'NYBCEMP')
OR t120585.visit_date >= TIMESTAMP '2010-04-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-08-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2011-01-01 00:00:00'
AND ( t120767.provider IN
('DYBNER,R', 'GRANATO,JR', 'TILLEM,S', 'WEBER,M')
OR t120800.insurance IN ('AETNA')
OR t120585.visit_date >= TIMESTAMP '2010-04-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-04-20 00:00:00'
AND ( t120767.provider IN
('AARONSON', 'GRANATO,JR', 'TILLEM,S', 'WEBER,M')
OR t120800.insurance IN ('ACSHEALTHN', 'CIGNA', 'NYBCEMP')
OR t120585.visit_date >= TIMESTAMP '2010-08-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-10-01 00:00:00'
AND ( t120767.provider IN
('AARONSON', 'GRANATO,JR', 'TILLEM,S', 'WEBER,M')
OR t120800.insurance IN
('ACSHEALTHN', 'AETNA', 'CIGNA', 'NYBCEMP')
OR t120585.visit_date >= TIMESTAMP '2010-10-01 00:00:00'
AND ( t120767.provider IN ('GRANATO,JR', 'TILLEM,S', 'WEBER,M')
OR t120800.insurance IN
('ACSHEALTHN', 'AETNA', 'CIGNA', 'NYBCEMP')
OR t120585.visit_date >= TIMESTAMP '2010-04-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-10-01 00:00:00'
AND ( t120767.provider IN
('AARONSON', 'GRANATO,JR', 'TILLEM,S', 'WEBER,M')
OR t120800.insurance IN ('AETNA')
OR t120585.visit_date >= TIMESTAMP '2010-04-20 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-10-01 00:00:00'
AND ( t120767.provider IN ('GRANATO,JR', 'TILLEM,S', 'WEBER,M')
OR t120800.insurance IN ('ACSHEALTHN', 'CIGNA', 'NYBCEMP')
OR t120585.visit_date >= TIMESTAMP '2010-04-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-08-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-10-01 00:00:00'
AND ( t120767.provider IN ('AARONSON', 'DYBNER,R')
OR t120800.insurance IN
('ACSHEALTHN', 'AETNA', 'CIGNA', 'NYBCEMP')
OR t120585.visit_date >= TIMESTAMP '2011-01-01 00:00:00'
AND ( t120767.provider IN ('GRANATO,JR', 'TILLEM,S', 'WEBER,M')
OR t120800.insurance IN ('AETNA')
OR t120585.visit_date >= TIMESTAMP '2010-04-01 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-04-20 00:00:00'
OR t120585.visit_date >= TIMESTAMP '2010-10-01 00:00:00'
AND t120767.provider <> 'WOLGEL,OLD'
However when we increase the filters the where clause is truncated to;
WHERE ( t120650.patient_seq_num = t120867.patient_seq_num
AND t120585.location_seq_num = t120738.location_seq_num
AND t120585.visit_seq_num = t120650.visit_seq_num
AND t120585.provider_seq_num = t120767.provider_seq_num
AND t120650.procedure_seq_num = t121446.procedure_seq_num
AND t120738.practice = 'MSP'
AND t120800.plan_category = 'CORNEL IPA'
AND CASE
WHEN t120650.charge_seq_num = t120650.parent_seq_num
THEN 'NO'
ELSE 'YES'
END = 'NO'
AND t120767.provider <> 'SANDH,OLD'
AND t120767.provider <> 'GRANSR,OLD'
AND t120767.provider <> 'GRANATO,SR'
AND t120767.provider <> 'SANDHAUS,J'
AND t120767.provider <> 'AARONS,OLD'
AND t120767.provider <> 'DYBNER,OLD'
AND t120767.provider <> 'GRANJR,OLD'
AND t120767.provider <> 'AAR-DYBNER'
AND t120767.provider <> 'SUBIETAS,A'
AND t120767.provider <> 'TILLEM,OLD'
AND t120767.provider <> 'WEBER,OLD'
AND t120767.provider <> 'WOLGEL,C'
Need help !

Size limit for flar file with Sol 10 WANBOOT

There seems to be some kind of a size limit for flash archive files used by wanboot. When I try to wanboot jumpstart, I get the following:
Processing profile
- Opening Flash archive
ERROR: HTTP server returned an invalid archive file size: <-1256985017> bytes
ERROR: Invalid HTTP headers were returned from the server
ERROR: Flash installation failed
Solaris installation program exited.
The flash archive is about 3GB. I'm doing the WANBOOT using the "boot cdrom" work-around, because the V100 I'm jumpstarting doesn't support the newer OBP parameters.
If create a new smaller flash archive like so:
mv sol10.flar sol10.flar.old
dd if=sol10.flar.old of=sol10.flar bs=1024K count=1024
cutting the flar down to 1GB. Then I do the wanboot. I don't get the error, and the jumpstart proceeds. Of course it would eventually have a problem when the cpio file reached premature end.
So is there a prescribed limit to flars with WANBOOT. I'm assuming it's 2GB, but if so, why?
No I haven't tried creating a compressed flar: that's next.
Thanks,
Chip Bennett
Laurus Technologies, Inc.
Itasca, IL

nope, 64-bit apache2.2 and still the same error:
Processing profile
- Opening Flash archive
HTTP server returned an invalid archive file size:
<-2116410290> bytes
ERROR: Invalid HTTP headers were returned from the
server
ERROR: Flash installation failed
Solaris installation program exited.
apache log:
192.168.224.112 - - [06/Jul/2006:20:52:45 +0200]
"HEAD /flash/archives/pt_sol_10_oem.flar HTTP/1.1"
200 -
192.168.224.112 - - [06/Jul/2006:20:52:45 +0200] "GET
/cgi-bin/bootlog-cgi?%3Ctime%3E+wanboot_client+ident:+
%5BID+380565+user.panic%5D+HTTP+server+returned+an+inv
alid+archive+file+size:+%3C-2116410290%3E+bytes
HTTP/1.1" 200 32
192.168.224.112 - - [06/Jul/2006:20:52:45 +0200] "GET
/cgi-bin/bootlog-cgi?%3Ctime%3E+wanboot_client+ident:+
%5BID+592631+user.panic%5D+Invalid+HTTP+headers+were+r
eturned+from+the+server HTTP/1.1" 200 32
192.168.224.112 - - [06/Jul/2006:20:52:45 +0200] "GET
/cgi-bin/bootlog-cgi?%3Ctime%3E+wanboot_client+ident:+
%5BID+915281+user.panic%5D+Flash+installation+failed
HTTP/1.1" 200 32
Any help would be much appreciated.hi. i spent a long time on this issue...and got it working reliably for more than 10 gb flars.
there are two issues- 1) apache must be 64 bit capable, and 2) you need the latest wanboot miniroot, for solaris 9 and one for solaris 10. i worked for a different division of a major car company based in stuttgart (take a guess) than i do now, and we eventually received the support we needed from sun, through the early release program. i do not know any details about if, how, or when those miniroots are otherwise available. at some point, i can only assume they will be generally available to all, if not already.
if someone knows more about this availability issue, i would also be interested in this issue.
thanks, dls

Size limit for how much video can be included in an AIR file?

I'm making an AIR app to play a video locally. It is on a PC with no internet connection, so the video (fv4) is included with the air install file. Is there a size limit for how much video can be included in an AIR file? I seem to get the "...file is damaged..." error when I include a video over 200mb. I use Flash CS4 to create and AIR is v 1.53.

I'm authoring in CS4 on a MAC with the latest OS and 4GB ram. It plays fine on the Mac. On a WIN7 PC with all updates and 4GB ram I get the errors if the air file that contains a video file over 200mb. I heard that AIR 2 should solve the issue and that it is just a PC issue.. Maybe... I have not tried using ADT to package the file.

Limit for license key Process Server Service. JCL_ FTP is exceded

Hi All,
We are getting strange error in Redwood. Now we are not able to start process servers. Process servers were running fine and we were able to run jobs. For some activities in UNIX server we stopped the unix process server and now we are getting strange error while starting process server
9:52:51 PM: JCS-102204: Limit for license key Process Server Service. JCL_ FTP is exceeded; limit is 0, changes require 1.
And we are not able create any new process servers also with job definition type System or Job Chain. While creating we are getting same error.
We have license ProcessServerService.JCL_FTP with the value true.
To create new process server we don't need any JCL_FTP license. Don't know why we are getting strange error.Please help me on this.
Version: SAP 7.00
Build: M26.10-29140
Thanks,
Preethish

Issue is fixed in next version of SAP CPS

[ERROR] Limit all payment cards except one

Hello Experts,
When we are using Multiple Credit Card payment option, we are getting the error "Limit all payment cards except one".
There is no option/flag to mark the limit for all cards. How to get rid of this error?
And I expect the amount to be split equally across all the cards which is not happening. Is it the case that user should enter the amount manually for all the cards? What if the user enters less/more amount and try to order?
Appreciate your quick reply on this. Got stuck with this error to create orders from webshop.
Thanks in Advance.
Regards
Satish

Hi Satish,
Even i am getting the same error. But i am using only one card and getting this error whenever i enter an amount value. when the amount is 0 there is no error. Can you pls tell me why is this error coming. Is there a place where i need to maintain or assign any values to the card.
thanks,
Manas.

PO Tolerance Limit for Price Variance

All,
For the key PE I have set Upper Limit for Percentage Check Limit to 0.01%. At what point is the tolerance limit check? Is it at PO creation or some other point?
Thanks,
Sean

The related error message appears at the time of PO creation. It will prevent you from creating the PO with a price that is ourside the allowed tolerance value
PE tolerance limits defines the allowed variation in price between the PO price and that of material price stored in the material master as standard price. The standard price is the output of the standard costing process

Error Limit for Datastores

Similar Messages

Maybe you are looking for