Error load Database toolkit

The program can open properly on other machine.
I installed both 8.6 and 2009 on this machine, and the database toolkit is installed under the folder of 2009.
When I open the vi, it give error as attached.
Any suggestion?
Attachments:
ss.jpg ‏53 KB

Seems that there is something corrupt at the frontpanel of this VI.
What version of Database TK are you using?
Did you allready try to reinstall?
Christian

Similar Messages

  • CR XI R2 JRC: Error loading database connector (driverImpl.DriverLoader)

    Hello!
    I developed a report with CR XI R2 SP6 Designer that uses native XML.  Everything in the report seems to be fine...in the preview of my report, all data looks correct.
    When trying to review the report with the JRC thick client ReportViewerBean, I get the following error just as the report is about to be displayed:
    Error loading database connector.  The class 'com.crystaldecisions.reports.queryengine.driverImpl.DriverLoader' could not be accessed.
    I went through about ten or so previous threads about this error, but none of the solutions are working for me.
    I'm using NetBeans to develop and debug, and I have CrystalDatabaseConnector.jar added to my project libraries, and I can view the class com.crystaldecisions.reports.queryengine.driverImpl.DriverLoader in the NetBeans object browser.
    Some of the posts I viewed mention a different jar for this DriveLoader class.  Is there something wrong with the version of CrystalDatabaseConnector.jar that I have?  Do I need an updated jar?  Does this jar rely on another jar that might be missing? I've been through the jar list in the CR XI R2 JRC deployment guide pdf, but I just don't see that I'm missing anything.
    Thanks for any suggestions!
    Edited by: Joseph Huber on Mar 9, 2010 2:00 AM

    Some stuff from the Java Console...
    - Formula {@DesiredEFT} compiled.
    - Formula {@DesiredLFT} compiled.
    - Formula {@DesiredGPM} compiled.
    - Done loading report.
    - Time to load report T:\USGD_Share\PCVOLS1\source\java\CRViewerTest\crDxProposal1.rpt took 160346 ms
    Crystal Report Viewer 2.1.21.2
    java.vendor = Sun Microsystems Inc.
    java.version = 1.6.0_16
    os.name = Windows XP
    os.version = 5.1
    os.arch = x86
    - JRCAgent1 received request: queryServerCapabilitiesRequest
    - Export Supervisor: loading available exporters
    - Export Supervisor: found 6exporters
    - Export Supervisor: loading exporter com.crystaldecisions.reports.exporters.format.page.pdf.PDFExporter
    - Export Supervisor: loading exporter com.crystaldecisions.reports.exporters.format.page.rtf.RTFExporter
    - Export Supervisor: loading exporter com.crystaldecisions.reports.exporters.format.report.crystalreports.CRExporter
    - Export Supervisor: loading exporter com.crystaldecisions.reports.exporters.format.record.sepv.SEPVExporter
    - Export Supervisor: loading exporter com.crystaldecisions.reports.exporters.destination.disk.DiskExporter
    - Export Supervisor: loading exporter daviss.jeff.cellexporter.CellExporter
    - Export Supervisor: fail to load exporter (stack trace follows).  This warning is only a problem if the exporter that failed to load is supported in a given project.daviss.jeff.cellexporter.CellExporter
    java.lang.ClassNotFoundException: daviss.jeff.cellexporter.CellExporter
            at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
            at java.security.AccessController.doPrivileged(Native Method)
            at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
            at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
            at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
            at java.lang.Class.forName0(Native Method)
            at java.lang.Class.forName(Class.java:169)
            at com.crystaldecisions.reports.formatter.a.c.char(Unknown Source)
            at com.crystaldecisions.reports.formatter.a.c.case(Unknown Source)
            at com.crystaldecisions.reports.formatter.a.c.for(Unknown Source)
            at com.businessobjects.reports.sdk.b.i.do(Unknown Source)
            at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
            at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
            at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.ReportSource.getServerCapabilities(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.getServerCapabilities(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.getServerCapabilities(Unknown Source)
            at com.businessobjects.crystalreports.viewer.core.rs.a.t(Unknown Source)
            at com.businessobjects.crystalreports.viewer.core.rs.a.<init>(Unknown Source)
            at com.businessobjects.crystalreports.viewer.core.rs.RSReportChannelFactory.newReportChannel(Unknown Source)
            at com.businessobjects.crystalreports.viewer.core.bi.a(Unknown Source)
            at com.businessobjects.crystalreports.viewer.core.bi.a(Unknown Source)
            at com.crystaldecisions.ReportViewer.ReportViewer$1.a(Unknown Source)
            at com.businessobjects.crystalreports.viewer.applet.h.run(Unknown Source)
            at java.lang.Thread.run(Thread.java:619)
    - JRCAgent1 received request: fetchReportPageRequest
    - JRCAgent1 attempting to acquire license
    - JRCAgent1 successfully acquired license
    - JRCAgent1 detected an exception: Error loading database connector.  The class 'com.crystaldecisions.reports.queryengine.driverImpl.DriverLoader' could not be accessed.
            at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
            at com.businessobjects.reports.sdk.b.i.if(Unknown Source)
            at com.businessobjects.reports.sdk.b.i.a(Unknown Source)
            at com.businessobjects.reports.sdk.b.i.byte(Unknown Source)
            at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
            at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
            at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.ReportSource.getPage(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.getPage(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.getPage(Unknown Source)
            at com.businessobjects.crystalreports.viewer.core.rs.b.if(Unknown Source)
            at com.businessobjects.crystalreports.viewer.core.av.a(Unknown Source)
            at com.businessobjects.crystalreports.viewer.core.av.run(Unknown Source)
            at java.lang.Thread.run(Thread.java:619)
    - JRCAgent1 releasing license
    Error loading database connector.  The class 'com.crystaldecisions.reports.queryengine.driverImpl.DriverLoader' could not be accessed.

  • Error using database toolkit

    Hello,
    I'm using a DB Tools open Conection.......to get data from a SQL database....when I run the VI's it appears the following error:
    Error -2147467259 occurred at DB Tools Open Connec (String).vi->connect_sql(1).vi
    Possible reason(s):
    Exception occured in Microsoft OLE DB Provider for ODBC Drivers, [MySQL][ODBC 3.51 Driver]Too many connections.  in DB Tools Open Connec (String).vi->connect_sql(1).vi
    I don't know why it happens.....i've attached the sub vi's. It can be the drivers I'm using for this database?
    Thanks
    Attachments:
    connect_sql(1).vi ‏26 KB

    The error is described as too many connections, so this probably happens because you open a connection and then try to open another without closing the first (or whatever number of connections you can have open simultaneously). Move the open connection out of the loop, place a close connection after the loop and make sure you have a proper way to stop the loop. If you only want to run this once, you don't need the loop. This is also true if you want to run it as a subVI.
    These things apply to any reference based action in LV (TCP, File I/O, queues and so on) - You need to open a resource once, use the reference you get in all the functions you need and then close the resource.
    To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
    In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
    Try to take over the world!

  • Hyperion Essbase Error: 1002097 Unable to load database [PlanType1]

    Hello,
    I am running Hyperion Essbase 9.2.0.3 version. This has happened 3 times now since last 2 weeks. I had to restore the APP folder from previous backup.
    The message that i see is Error: 1002097 Unable to load database [PlanType1]
    I have searched google and no luck. Anyone knows how to fix this or why we get this message. I don't want to restore from backup everytime.
    Thanks
    Azmat Bhatti

    I think you have currepted backup.
    Try run essmsh script to recover broken block's.
    Backups - Files still locked after beginarchive

  • "Error 1002097 Unable to Load database" while starting an Essbase App.

    Hello Essbase Experts,
    I am getting below error while starting an Essbase Application:
    "Error 1002097 Unable to Load database"
    Below is an extract from the Essbase Application Log:
    [2012-04-04T14:14:03.816-19:14] [RPA] [ESM-6] [ERROR] [32][] [ecid:1333566842161,0] [tid:2058170128] Unable to lock file
    [SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm]. Essbase will try again after a short
    delay.
    [2012-04-04T14:14:04.821-19:14] [RPA] [ESM-5] [ERROR] [32][] [ecid:1333566842161,0] [tid:2058170128] Unable to lock file
    [SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm]. Please make sure other processes do not
    access Essbase files while Essbase server is running.
    [2012-04-04T14:14:04.821-19:14] [RPA] [MBR-89] [WARNING] [1][] [ecid:1333566842161,0] [tid:2058170128] Unable to open
    [SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm] for database
    [RPA][2012-04-04T14:14:04.821-19:14] [RPA] [SVR-97] [ERROR] [32][]
    [ecid:1333566842161,0] [tid:2058170128] Unable to load database [RPA]
    [2012-04-04T14:14:04.821-19:14] [RPA] [SVR-97] [ERROR] [32][]
    [ecid:1333566842161,0] [tid:2058170128] Unable to load database []
    [2012-04-04T14:14:04.835-19:14] [RPA] [SVR-97] [ERROR] [32][]
    [ecid:1333566842161,0] [tid:2058170128] Unable to load database []
    Please sugest pointers to start the application.
    Thanks,
    KK

    *[2012-04-04T14:14:03.816-19:14] [RPA] [ESM-6] [ERROR] [32][] [ecid:1333566842161,0] [tid:2058170128] Unable to lock file*
    Solution would be easy ...like if the Essbase Agent is stopped using the services.msc (services panal)on Windows while a process is currently running, or if there has been an abnormal termination of the Essbase Agent, orphaned ESSSVR processes can be left. Shuting down the Essbase server using ESSCMD or MaxL then Check Task Manager confirm the ESSBASE.exe process later by this ESSSVR.exe processes should end if still NO then Do an "End Process" on any ESSSVR.exe process that is still running. Start the Essbase service and start the application.
    ESSSVR.exe is process which keep application Alive (bad thing is if u have many applications running similarlly u have same numbe of ESSSVr .exe will be running in task master ..but u cant find out which one belongs to which application :( )
    Reasons
    looking at your error i can say , First of all you need to know what is Lock in EAS ? and what locks exist
    (right-click on Essbase Servername, EDIT->LOCK and EDIT->LOCKED OBJECTS, and if your database/outline appears in there, unlock it.)
    Check any antivirus- and backup software that may be scanning / running on your Essbase folders as that can lock the files and any ESSSVR process stays when the Essbase Agent is stopped
    More over another chance of getting error is when you have you page and index files in different location and rest otl, rep.csc script in another drive .. usually while taking back up in OTL,csc drive u do get created index file and page file even u have page and index file in diffrent drive so doe to this u get this error unable to load database
    Hope this give u some idea

  • Error --1002097 Unable to load database

    Hi,
    Essbase version 7.
    I am having a problem when I am trying to start database or running Essbase give me an Error: 1002097 Unable to load database.(error 1002097 is related to the db corrupt.) this is on PRD server.
    we have 2 more server ,(.BS & Dev).
    1.I copied the Db from the BS to PRD --- but the application and DB in the PRD system failed to start giving the same error 1002097 .
    2.next i did was to migrated the same application from BS to Dev system which went fine and i can see the outline . Application is getting started in the DEV system .
    3. Since it was okay in DEV. i migrated the application from BS TO PRD .it got migrated but it is not starting giving me the same error 1002097.
    any help will be great.
    thanks
    ram
    Thank you,

    Re: How can we Restore a corrupted cube.

  • Error: Unable to Load Database

    Anyone seen this error: "Unable to Load Database"? How to recover? A link or a page for me to read would work too. thx! James

    The usual cause for this is that the database has become corrupted - or one or more key files was somehow deleted. Take a look at the application log and see if there is a more detailed message. Unfortunately, if the data has been corrupted, you will have to recover from backup, or rebuild your cube.To get the database started, you can go into the database directory and delete the *.ind, *.pag, *.tct, *.ind and *.esm files. This will allow the app to start, but the data will be GONE - you will HAVE to reload and calc it, or restore from backup.Regards,Jade--------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]

  • Essbase Error Error: 1002097 Unable to load database

    Hi,
    I am using essbase 7.1. I am having a problem when I am trying to run any calc start application or database or doing anything Essbase give me an Error: 1002097 Unable to load database. I restart essbase services but nothing happen. Any help would be great.
    Thank you,

    I am currently getting the same error, it happens randomly on different models each day at around the same time. I have found this error on the log for one model.
    Unable To Find Or Open [e:\Program_Files\Hyperion\Essbase\bin\APP\LAdPBurn\LAdPBurn\ess00011.pag]
    I think the data files are locked by something, I am checking with our server team to see when the backups run as there are no other processes running at this time in Essbase. Incidentally the model has 15 .pag files.

  • Unable to load Database Error for one of the BSO Application.

    Hello Everyone,
    We have one Production Issue like suddenly the an Application Fiji while should be running was stopped. When i tried to restart it its showing Error.
    gvw3086-v.atlanta.hp.com:1423.Fiji    Start  application    August 28, 2013 8:32:24 PM SGT    Failed
    Error: 1002141 Unable to load database [Arirang], error code [1019038]
    gvw3086-v.atlanta.hp.com:1423.Fiji.Consol    Start database    August 28, 2013 8:33:30 PM SGT    Failed
    Error: 1002141 Unable to load database [Arirang], error code [1019038].
    I checked the Log but not sure it correct or not i see this Error message.
    [Wed Aug 28 11:33:48 2013]Local/Fiji///7944/Info(1002089)
    RECEIVED ABNORMAL SHUTDOWN COMMAND - APPLICATION TERMINATING
    But i also saw this error before but the application use to start automatically but this time it did not.
    can anyone help me on this.
    Regards,
    Naveen

    Hi,
    As i mentioned above its only for one Application Fiji. For a temporary Solution we tried to restart the Hyperion Services. But this did not work. One of the the Hyperion Service HyPService(not sure of the exact name). did not restart. So we have done a a fail over to other node and now the Fiji apps is running. But i don't think so what we have done is the correct fix for the solution. Have any one faced this problem.
    Hi John,
    Which Doc ID you mean to refer me is that the doc which comes with the Essbase Software.
    Regards,
    Naveen

  • Project Error: Open project was canceled or RoboHelp was unable to load database

    Hi,
    I checked an HTMLHelp project out of SourceOff Site (SOS),
    then attempted to open it locally with RoboHelp 5 when I got the
    error message: "Open project was cancelled or RoboHelp was unable
    to load database."
    I found the TechNote for this error message (rb_3245) which
    said to delete the .xpj and .cpd files, then right-click the HHP
    file and click Edit to open the project. This worked fine for
    opening the project, however the Primary Layout Source defaulted to
    WebHelp. I reset the Primary Layout Source to HTMLHelp which caused
    all of the graphics in the project to not display. I fixed this
    issue, compiled the Help, and all appeared to be fixed. I checked
    the project back into SOS to back it up. This morning, I checked it
    out of SOS and tried to open the project locally again, only to get
    the same error. I closed the project, undid the check-out, and
    asked another writer to check-out the project then open it locally
    to see if he got the same error. He did not get the error.
    I am not sure what could be wrong on my computer that is
    causing this error. I had no problems opening and using this
    project until yesterday and I made no file name or path changes to
    the project. Any ideas on what may be wrong?

    Welcome to the forum.
    The message is usually easily dealt with. I haven't checked
    the article as you didn't include a link but I'm guessing it
    involved deleting a couple of files and then using the HHP file to
    open the project.
    What is more worrying is that you cannot create a new
    project.
    Have you tried opening one of the supplied sample files?
    Are your projects stored locally and not on a network?
    Have IT given you a new profile to log on with?
    Has anything else changed in your environment?

  • Error: 1002097 Unable to load database in Essbase 11.1.2.2

    Hi All,
    I am getting error like Error: 1002097 Unable to load database when I tried to load an application using MAxl. We have installed 11.1.2.2 version newly and till yester all the process was working fine. I was able to run some automation batch scripts on the essbase application. Sudden Application stops responding. I am able to load the sample application which are come with the essbase. But, only my test application is not working fine.
    I have tried Essbase server restart. But, no luck. Could any one suggest what might be the reason and how to debug.
    Thanks
    Sri

    Hi Sri,
    Please look into the below forum.. Hope it might help you...
    Ref: https://kr.forums.oracle.com/forums/thread.jspa?threadID=874484
    Sol 2:
    Ref: http://www.network54.com/Forum/58296/thread/1185858760/Unable+to+Load+Database
    The best solution I have found so far is to stop the application and delete or rename all .ind, .pag, .esm and .tct files for the troubled database and restart the application.
    It will create these files from scratch and you can load your data.
    Note: Please take the necessary backup before trying..
    Thanks

  • Failed to load database information. Error in File temp_

    Our environment:
    Windows Server 2012 R2 Data-center Edition 64 bit
    Visual Studio Pro 2013 Version 12.0.3.30110.00 Update 1
    .Net 4.5.51641
    Crystal Reports for VS 2013 V13.0.9.1312
    Oracle ODAC 11.2.0
    We created a winform application to generate a form letter report that runs fine within the IDE. When we build the the exe and copy it from the project folder to a folder on the C:\drive of this same pc and try to execute it we get these error messages (partial list);
    CrystalDecisions.CrystalReports.Engine.DataSourceException: Failed to load database information.
    Error in File temp_d55286fc-26ee-4216-9062-3e32380313ab {B640FD39-66AC-4B6E-995D-7218BB48A992}.rpt:
    Failed to load database information. ---> System.Runtime.InteropServices.COMException: Failed to load database information.
    Error in File temp_d55286fc-26ee-4216-9062-3e32380313ab {B640FD39-66AC-4B6E-995D-7218BB48A992}.rpt:
    Failed to load database information.
       at CrystalDecisions.ReportAppServer.Controllers.DatabaseControllerClass.ReplaceConnection(Object oldConnection, Object newConnection, Object parameterFields, Object crDBOptionUseDefault)
       at CrystalDecisions.CrystalReports.Engine.Table.SetDataSource(Object val, Type type)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
       --- End of inner exception stack trace ---
       at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSource(DataSet dataSet)
       at cr3Test.Form1.Form1_Load(Object sender, EventArgs e)
    Here is the app:
    Imports System.Data.OleDb
    Imports System.Data
    Imports System
    Imports System.Windows.Forms
    Imports CrystalDecisions.CrystalReports.Engine
    Imports CrystalDecisions.Shared
    Public Class Form1
        Private Sub Form1_Load(sender As Object, e As EventArgs) Handles Me.Load
            Dim crReportDocument As New CrystalReport3()
            Dim DataSet1 As DataSet
            Dim adoOleDbConnection As OleDbConnection
            Dim adoOleDbDataAdapter As OleDbDataAdapter
            Dim connectionString As String = ""
            connectionString = "Provider=OraOLEDB.Oracle;"
            connectionString += "Data Source=ourdb;"
            connectionString += "User ID=ouruserid;Password=ourpsw"
            adoOleDbConnection = New OleDbConnection(connectionString)
            Dim sqlString As String = "select * from TEMP_FRI_LETTERS"
            adoOleDbDataAdapter = New OleDbDataAdapter(sqlString, adoOleDbConnection)
            DataSet1 = New DataSet()
            adoOleDbDataAdapter.Fill(DataSet1, "TEMP_FRI_LETTERS")
            'Dim xmlPath As String = "C:\Temp\test.xml" ' use these two statment s to verify dataset works
            'DataSet1.WriteXml(xmlPath, XmlWriteMode.WriteSchema)
            crReportDocument.SetDataSource(DataSet1)
            crReportDocument.PrintOptions.PrinterName = "HP_LaserJet_4350_PCL_5e_Info_Tech"
            crReportDocument.Refresh()
            crReportDocument.PrintToPrinter(1, False, 0, 0)
            DataSet1.Dispose()
            adoOleDbDataAdapter.Dispose()
            adoOleDbConnection.Close()
            adoOleDbConnection.Dispose()
            crReportDocument.Dispose()
            Me.Close()
        End Sub
    End Class
    Here is the app.config:
    <?xml version="1.0" encoding="utf-8" ?>
    <configuration>
        <startup useLegacyV2RuntimeActivationPolicy="true">
            <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" />
        </startup>
        <system.windows.forms jitDebugging="true" />
    </configuration>
    We have the CPU set to x86 as we are ultimately trying to generate a 32 bit app for XP and Win 7. We only installed the 32 bit run time on this pc because we have no intention of going to 64 bit apps on the clients. Are there additional dlls or something that has to be installed in the same folder as the exe on this development machine.
    Bruce

    Looking at the AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_myprograminfo led us to the last dll loaded being:
    LoadedModule[211]=C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crdb_adoplus_res_en.dll
    State[0].Key=Transport.DoneStage1
    State[0].Value=1
    FriendlyEventName=Stopped working
    Scanning the community for "crdb_adoplus_res_en.dll" we got a hot on this issue again:
    Failed to load database information. Error in File temp_
    From the above we found this:
    1. the app.exe.config is all in one package which cannot be separated with the EXE file.
    2. the supporting component such as dll files, app.exe.config etc CANNOT be combined into the EXE file
    Adding the cr3Test.exe.config to the same folder as the cr3Test.exe RESOLVED the problem on Win 7. It also RESOLVED the problem on Server 2012 R2.
    We still need to test on Server 2008 R2 but we are hopeful when that time comes.
    Thanks.
    Bruce

  • Failed To load database? error

    Hi there,
    I am trying to implement "Replay transaction" feature which is in 11.1.1 version to one of my database.I followed all the steps that are specified here http://oraclebizint.wordpress.com/2009/02/18/hyperion-essbase-11110-database-archive-and-replay-in-bso-cubes/
    After Archiving and restoring the databse. i am trying to connect to databse from excel addin but it is giving me "failed to load database" error
    I tried to use replay transaction from console but its giving me the same error....
    Any suggestions???
    Thanks in advance...

    Hi john,
    I did that but didn't see any ghost processor running....YEah i ma running it in eas...After archiving the database i am stopping/unloading tha databse to restore. after that when i tried to start it then it says "failed to load the database."
    It's acting really wierd ...sometime even application is not starting.
    I tried to delete the database and create a new one and then i restored it.
    It worked for the first time... but when i tried to apply it second time inorder make use of replay transaction then again there is aproblem.
    Now i'm not even able to create a database when its running ..when i stop the application then it is showing the databse which i already deleted.

  • Error Failed to load database information - access report from jsp in linux

    Hi,
    While accessing the report from my jsp file I got the below error. I am using Crystal Report Server 2008 V1 in linux environment.
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Failed to load database information.
    Error in File rpt_dp_customer_stmt {9515FCCB-0245-11E0-9DA4-000C29D5AD7D}.rpt:
    Failed to load database information.---- Error code:-2147482931 Error code name:failed
         com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException(Unknown Source)
         com.crystaldecisions.proxy.remoteagent.s.a(Unknown Source)
         com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
         com.crystaldecisions.sdk.occa.report.application.z.a(Unknown Source)
         com.crystaldecisions.sdk.occa.report.application.ak.if(Unknown Source)
         com.crystaldecisions.sdk.occa.report.application.ad.int(Unknown Source)
         com.crystaldecisions.sdk.occa.report.application.bk.for(Unknown Source)
         com.crystaldecisions.proxy.remoteagent.v.a(Unknown Source)
         com.crystaldecisions.proxy.remoteagent.v.if(Unknown Source)
         com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
         com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(Unknown Source)
         org.apache.jsp.formula_jsp._jspService(formula_jsp.java:117)
         org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    Moreover, in my jsp i am passing the data base parameter like below,
    PropertyBag logonProperties = new PropertyBag();;
        mainPB.put(PropertyBagHelper.CONNINFO_CRQE_LOGONPROPERTIES, logonProperties);
        mainPB.put(PropertyBagHelper.CONNINFO_DATABASE_DLL, "libcrdb_jdbc.so");
        logonProperties.put("Database Class Name", "oracle.jdbc.driver.OracleDriver");
        logonProperties.put("Use JDBC", "true");
        logonProperties.put("Connection URL", url);
        logonProperties.put("Server", dbserver);
    Also I set the LD_LIBRARY_PATH in linux machine, because i have the libcrdb_jdbc.so file on that path.
    /home/ReportServer/bobje/enterprise120/linux_x86/crpe/

    Its working. I gave crdb_jdbc.dll name in the connection info

  • Linux - Oracle - Crystal Report Server XI : Error in File Report1: Failed to load database information.

    I am using Crystal Reports Server XI on Linux Server with Oracle Server 10g.
    I did install Oracle Client on Report Server and config Oracle SID in tnsnames.ora also. It works well with tnsping command. Then, I published a report which was created in Crystal Reports developer on this server.
    When I preview the report on Report Server. I got the following error message:
    Error in File Report1: Failed to load database information.
    Try to fix the problem I ran web Central Management Console -> Objects ->Report1->Process -> Database and set there the following parameters:
    Database driver: Oracle
    Server: servers_host_name
    Database: (tried both ORACLE_SID and tns_name)
    User: oracle_user_name
    Password: oracle_pw
    It still got the same problem.
    I will appreciate any help.
    Tham.

    I was having a similar problem in Crystal Reports Server 2008 v1, and had to install the full client to resolve it, which I didn't like.  I poked around some, and was able to get the Instant Client working with a few minor changes.  Note that I tried it only with the 32-bit Instant Client even though I was on a 64-bit system because that was what SAP recommended when I talked to them.
    The changes I had to do was initialize the Oracle environment variables (the instant client doesn't have a script to do this for you) and to create a soft-link which is included in the full client, but not in the instant client.
    To setup the environment variables I created a file called env.sh and put it in /opt/crystal/bobje/setup/oracle/, where /opt/crystal was my install path.  This ensured that it got called by the /opt/crystal/bobje/setup/env.sh script which runs as part of the System init scripts to initialize the environment.  The following is what I put in my file (again for the 32-bit 11g R2 instant client):
         export ORACLE_SID=summitdb
         export ORACLE_HOME='/usr/lib/oracle/11.2/client'
         export ORACLE_BASE='/usr/lib/oracle/'
         export TNS_ADMIN='/usr/lib/oracle/11.2/client/network/admin'
         export PATH="$:/usr/lib/oracle/11.2/client/bin"
         export LD_LIBRARY_PATH="$$/usr/lib/oracle/11.2/client/lib"
    After that, I created the missing soft link using this command:
         ln -s "$/lib/libclntsh.so.11.1" "$/lib/libclntsh.so.10.1"
    Once I had done those two things, and restarted the service using the /etc/init.d script, it worked fine.

Maybe you are looking for

  • Rescue email doesnt work

    My son forgot his security questions and he can not setup his new Ipad mini.

  • Assigning Value To An Application Item via JS

    Hi guys, I am trying to assign a value to an application item by using javascript. But I can't do this when I try to display with alert the result is empty. Do you have any idea how can I assign value to an application item by using javascript? else

  • Context root

    How to fetch context root of web application from FacesContex?

  • Validate the primary key

    hi All, i am writing the below code to validate the Customer ID. if Customer ID is already existing in the table then we need to throw an exception otherwise we need to insert the data in the table. but when i click on apply button it directly goes t

  • Run 5 commands in parallel using scriptblock

    Hi, I have an array of 10000 commands that I want to process through an application, but only 5 commands in parallel at the same time. So I will take 5 commands from the array $arrCommands, then run those in parallel, then take another 5 commands..pr