Error message "ABAP/4 error during dynamic assign" on Contact Log creation.

Hi,
We are getting an error message "ABAP/4 error during dynamic assign beyond program bounds" displayed while creating contact log using transaction "BCT0".
Please suggest what can be the cause of the error message and how we can remove this.
Regards,
Ankur

Dear Andrea,
The problem should be caused by obsolete entry in table TFAWX.
Please use the following report for deleting this entry (test before in your TEST System) :
report ztfawx_delete.
tables tfawx.
select single * from tfawx where prog = 'SAPLBAS0'
                            and bldgr = '0110'
                            and mnum = 23
                            and bfeld = '$GENERAL'.
if sy-subrc = 0.
delete tfawx.
endif.
Buona Giornata
Mauro

Similar Messages

ABAP/4 error during dynamic assign beyond program bounds

Hi experts,
after an Upgrade from 4.7 to Ecc 6.0, launching transaction AC03 an error (green light) occours "ABAP/4 error during dynamic assign beyond program bounds".
Is there anyone who find a solution?
regards
andrea brescia
Edited by: andrea brescia on Nov 30, 2010 1:42 PM

Dear Andrea,
The problem should be caused by obsolete entry in table TFAWX.
Please use the following report for deleting this entry (test before in your TEST System) :
report ztfawx_delete.
tables tfawx.
select single * from tfawx where prog = 'SAPLBAS0'
                            and bldgr = '0110'
                            and mnum = 23
                            and bfeld = '$GENERAL'.
if sy-subrc = 0.
delete tfawx.
endif.
Buona Giornata
Mauro

An error occurred in system XYZ during account assignment

Hello all,
I have a scenario and I am copying a service product from one service order to another service order and I am getting this error below. If I use the saem service product individually in service order -2 I do not get this error.
*An error occurred in system DV1CLNT400 during account assignment
Message no. CRM_ORDER_MISC 060
Diagnosis
Errors occurred when assigning an account assignment object to a business transaction. To view the error message, see the accompanying log file.
Transfer Log
Object link not known in CO (Notification E IAOM 019)*

Hi Manoj
You need to assign the Controlling object type and as per the standard there are 3 controlling object types those are,
1) Single object Controlling --> The service order replicated to ECC creates a Internal order and finally cost and revenues are posted or settled in the cost center
2) Mass Object Controlling --> The cost and revenues of the service order are directly posted to CO-PA(Cost & Profitability Analysis)
3) No Controlling
Based on the business requirements you need to define the Controlling obejct,you will find the IMG customization path in ECC as follows,
IMG>Integration with other mySAP components>CRM>Settings for Service Processing>Controlling integration-->Establish Controlling type, Controlling scenario & Controlling level.
I hope this helps.
Thanks
Arun

An error occurred in system Q22CLNT318 during account assignment

Hi,
While creating service order in CRM QA server I am getting following error message:
"An error occurred in system Q22CLNT318 during account assignment"
Could somebody help me in this regard and explain the steps to solve the issue.
Regards
Amandeep Dhaliwal

Hello,
Errors in account determination occurs because of following reasons:
The account assignment group in the customer master record of the payer has not been maintained.
The account assignment group in the material master record of a billing item has not been maintained.
Customizing of account assignment has not been set up correctly.
Controlling Area settings is not correctly done.
Regards,
Rajendra

An error occurred in system PRD555 during account assignment

Hi Experts
In service order showing this error An error occurred in system PRD555 during account assignment
Message no. CRM_ORDER_MISC 060
Diagnosis
Errors occurred when assigning an account assignment object to a business transaction. To view the error message, see the accompanying log file.
Transfer Log
No controlling type could be determined (Notification E IAOM 012)
No controlling type could be determined (Notification E IAOM 012)
No controlling type could be determined (Notification E IAOM 012)
how we can correct this error.
thank you
Manoj

Hi Manoj
You need to assign the Controlling object type and as per the standard there are 3 controlling object types those are,
1) Single object Controlling --> The service order replicated to ECC creates a Internal order and finally cost and revenues are posted or settled in the cost center
2) Mass Object Controlling --> The cost and revenues of the service order are directly posted to CO-PA(Cost & Profitability Analysis)
3) No Controlling
Based on the business requirements you need to define the Controlling obejct,you will find the IMG customization path in ECC as follows,
IMG>Integration with other mySAP components>CRM>Settings for Service Processing>Controlling integration-->Establish Controlling type, Controlling scenario & Controlling level.
I hope this helps.
Thanks
Arun

Firefox is very slow to respond when opening and nearly always stops responding altogether even refusing to react to Task Manager "End Program@ command. The "not responding@ error message also comes up during navigation on line.

Firefox is very slow to respond when opening and nearly always stops responding altogether, even refusing to react to the Task Manager "End Program" command. The "not responding" error message also comes up during navigation on line. Several attempt have to be made to get on line. A loss of stability seems to be endemic at the moment.

Try following the instructions here: [[Firefox hangs]]

I am trying to reinstall itunes 10.5 and am getting the following error message. An error occurred during the installation of assembly "Microsoft.VC80.CRT.type="win32".version="8.0.50727.6195".publicKey Token="1fc8b3b9a1e18e3b"Anyone know how to fix this?

i am trying to reinstall itunes 10.5 and am getting the following error message.
An error occurred during the installation of assembly “Microsoft.VC80.CRT.type=”win32”.version=”8.0.50727.6195”.publicKeyToken=”1fc8b 3b9a1e18e3b”.processorArchitecture=”x86””. Please refer to Help and Support for more information. HRESULT:0X800736B3.
Anyone know how to fix this?

same problem. tried the ff fixes from microsoft but no joy
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
other ideas would be appreciated.
cheers

Error message "There is no item Category Assigned to Account"

Hi All,
When I tried to post a transaction in G/L Accounts screen , I got the following error message "There is no item Category Assigned to Account 400300/ESSA"'.

Dear Sharathlsbu
Probably document splitting is activated in your company code.
So at the following path Assign an item category to your GL account.
Path: SPRO-Financial Accounting - General Ledger Accounting - Business Transaction - Document Splitting - Classify G/L Accounts for Document Splitting..
Check the item category that is most relevant to your GL from dro-down
Regards
shankar

Received error message "host is down" during book download

how to get my purchased book after receiving an error message "host is down" during download

Hello gbanks0528,
You may need to report the issue to the folks in our iTunes Store.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Cheers,
Allen

TS3212 I purchased this computer today Windows 7; I have gone to the 64-bit download but at the end of the download I receive an error message saying the error occured during installation. Cannot download, any other way?

I purchased this computer today Windows 7; I have gone to the 64-bit download but at the end of the download I receive an error message saying the error occured during installation. Cannot download, any other way?

What does the error message say? (Precise text, please.)

I'm making a DVD with my iMOVIE and when I tried to burn a DVD I got an error message that said "ERROR IN PROJECT

I'm making a DVD with my iMOVIE and when I tried to burn a DVD I got an error message that said
"ERRORS IN PROJECT
There were errors during the project validation that have to be fixed before burning the project."
What does this mean and how do I fix it.
jim

Hi
Do You have a NEW Mac ?
Does it really have iDVD ? New ones Don't.
Please tell much more
• Mac used
• Program used (versions)
• Material used (Codecs, file formats etc)
Yours Bengt W

Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide Solution

Hi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change.................

Itunes says I must update to 11.1, but everytime I try to run it I get an error message saying: "an error occured while running installation" Help?

Itunes says I must update to 11.1, but everytime I try to run it I get an error message saying: "an error occured while running installation" Help?

The full message reads: "Errors occurred during installation before iTunes could be configured. Your system has not been modified. To complete the installation, run the installer again. Click finish to exit the installer."
I have run it again and get the same message. Have rebooted and tried again. Same results.

Error message: "an internal error has occurred DB statement finalized twice " LR4.3

LR4.3
New catalogue created 2nd Jan 2013 - less than 300 images
Windows 7 Home Premium 64-bit, fully updated
Lenovo G770 6GB RAM 500GB HDD (partitioned C: & D: LR executables + catalogue on C: - 200GB free; images on D: - 160GB free)
Olympus ORF (from E-P2) imported as DNG
30 image files imported
One user preset run with import.
all imports selected in library then autotone applied in quick develop
change to develop module
start to edit - crop -
error: "An internal error has occurred! DB statement finalized twice "
Now can change module, click on folders etc, but no images are displayed.
No disk activity
LR displays "Loading ... " in centre pane
Closed LR without other errors displayed.
Now cannot restart LR - click on icon and brief hourglass, then nothing.
task manager shows two instanced of lightrrom.exe as running, one at 830K and another at 2.3K
Kill these tasks & restart lightroom. Catalogue does not show most recent import.
Close lightroom - still shows "phantom" lightroom.exe in task manager.
that's as far as i've got ...

Hi,
just got the same Error-Message. It happend during Keywording.
Tried to shutdown und save the Catalog, but Lightroom is not responding any more.
Just upgraded to 5.3 a few days earlier.
Any Ideas??
THX!

I just installed Lightroom CC. When I try to open it, I get an error message: "An internal error has occurred. Cannot create the required folder: ..."

I just installed Lightroom CC. When I try to open it, I get an error message: "An internal error has occurred. Cannot create the required folder: ..."

Cannot create the required folder

Error message "ABAP/4 error during dynamic assign" on Contact Log creation.

Similar Messages

Maybe you are looking for