Error message handling in Integration Process

How to use the fault message type? when define the fault message type for inbound message interface, how to output that fault message?
hope from your helps
Thanks,
Michael

Hi,
A fault message is usually sent from the receiver system to the sender system.
when define the fault message type for inbound message interface,
We usually use fault messages when we need the receiver to report an application error to the sender.
How to use the fault message type?
In order to use these fault messages, we need to make use of the data type exchange fault data.
We need to create a message type which has exchange fault data as the message type.
When we create an outbound synchronous interface, we need to specify this fault message type.
how to output that fault message?
This i am not very sure.
But we must be able to map it to a similar structure, and send it as a file to a file server.
Regards,
Smitha.

Similar Messages

Correlate MDN to AS2 message using an integration process

Hello,
I had a similar question in a previous thread but closed it as the problem might have not been to clear.
Problem is that we have to use BPM for an AS2 scenario and correlate the MDN back to the process as we need BPM functionalities such as error handling and time-outs as well as some data enrichment.
Problem is even when I request the MDN synchronously on Adapter Level it is delivered as asynchronous message back. So I need to figure out how to correlate it.
MDN contains the messageID so I tried to use the messageID of the original message as correlation. However problem is that a new message ID is assigned when the message is sent by the integration process and the second on is used then as ID in the MDN.
It seems to me that it is therefore not possible at alle to correlate the MDN? However this is a definitive requirement so I am really stuck at the moment.
Do you have any idea?
Thank you very much!

Hello,
well, actually the correlation itself would work as I extract the messageID in a transformation step and then activate the correlation in a send step.
If I check the flag "Refer MDN to XI" in AS2 receiver channel the MDN is delivered back to the integration server and the original messageID is then part of the MDN message payload.
However, and that is the big problem, the MDN uses the second messageID that is created when sending the message from the integration process (and not the first one when the message is sent from sender and process by the integration process).

Trying to create a Photomerge in Bridge, when the files open in Photoshop ( small jegs ) , I get a error message of " Unable to process latte files " / " null is not an object "

Trying to create a Photomerge in Bridge, when the files open in Photoshop ( small jegs ) , I get a error message of " Unable to process latte files " / " null is not an object "
Please help

Wait a second, Photoshop can make lattes now? Personally I prefer my coffee black, but man have I been under-utilizing this program.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

Error message handling in BAPI...

Hi Guys,
I am working on documentation of a BAPI used SAP insurance module. Now I want to see all the error messages associated/ handled in that BAPI. How can I do that ? Is there a table in data dictionary where I can see error messages handled by a given Function module/ BAPI?
Any inputs will be highly appreciated.
Thanks.
Regards,
Tushar.

Hi,
here´s one possible solution:
CALL FUNCTION 'MESSAGES_INITIALIZE'.
LOOP AT it_return_bapi.
    CALL FUNCTION 'MESSAGE_STORE'
         EXPORTING
              arbgb          = it_return_bapi-id
              exception_if_not_active = ' '
              msgty                = it_return_bapi-type
              msgv1          = it_return_bapi-message_v1
              msgv2          = it_return_bapi-message_v2
              msgv3          = it_return_bapi-message_v3
              msgv4          = it_return_bapi-message_v4
              txtnr          = it_return_bapi-number
              zeile          = ' '
         EXCEPTIONS
              message_type_not_valid = 1
              not_active              = 2
              OTHERS                  = 3.
ENDLOOP.
CALL FUNCTION 'MESSAGES_STOP'
       EXCEPTIONS
            a_message = 04
            e_message = 03
            i_message = 02
            w_message = 01.
IF NOT sy-subrc IS INITIAL.
    CALL FUNCTION 'MESSAGES_SHOW'
         EXPORTING
              i_use_grid         = 'X'
              i_amodal_window    = i_amodal_window
         EXCEPTIONS
              inconsistent_range = 1
              no_messages        = 2
              OTHERS             = 3.
ENDIF.
ENDFUNCTION.
Best regards

Cannot update my iPad2 to 5.1 An unknown error message cancels the download process. Could you please inform me how to fix this issue? Thanks!

Cannot update my jail broken iPad2 & iPhone 4S to 5.1
An unknown error message cancels the download process. Could you please inform me how to fix this issue? What is also odd is the fact that the update through iTunes is substantially bigger than downloading it directly OTA, although both methods have been unsuccessful so far...
Thanks!

About the only thing you can try is using the Online Internet Recovery system to reinstall Lion on your Mac over the top of the current install. that will reset all system files and should not touch your personal files or the apps you have installed.
Or iof you have a recent Time Machine backup use that to restore your Mac to that point in time.

When I view email on my iPad, I get an error message saying "unable to process your request" . How do I correct this?

When I access my iPad email, I get an error message saying "unable to process your request" How do I correct this?

Start with the basics. Force close mail and reset your iPad.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't help, you might want to consider resetting your router by unplugging it from power for about 30 seconds. That can help at times even if all of your other devices are connecting to the Internet. I suggest this, because the message that you are getting may be due to a bad connection to the Internet.

I have a hp pavilion dv7 notebook pc and i'm get and error message that my integrated camara is off

i have a hp pavilion dv7 notebook pc and i'm get and error message that my integrated camara is off, and when I go into skype or cyberlink i can not see me

Hey Sam55555,
I see that you're having an issue with the webcam.
Could you provide me with a model and product number of your notebook.
So that I may look into this further to try and provide you with more helpful instructions.
Also, this Document should help you out. If it doesn't let me know the full model name and i will find a document for your notebook.
What i consider doing is the section that says "Reinstalling the original webcam program that came with your computer".
THX sam

Handling fault messages in an Integration Process (bpm)

I have a bpm in PI 7.11 which performs a synch call to an external webservice. In addition to the request/response, that webservice can also generate two faults: ObjectNotFoundFault and generalfault. I am having trouble handling these faults - when a fault occurs my handler is not being invoked and thus the bpm process stops/errors. When I look at the underlying process (via txn swi1), I see the exact error text:
"No exception defined for fault message ObjectNotFoundFault http://www.companyb.com/services/olsa_v1_0/"
From what I understand within the bpm synch call step to the webservice I need to do the following to handle the exception/fault:
- put the synch call (to the webservice) into a block
- add an exception branch to that block named let's say A & set the exception handler of that block to be A
- in the exception setting of that synch step, select A
In my case, I don't care about the fault details other than to ensure it does not stop the whole Integration Process, so in my exception branch I don't do anything. I did try adding a control step within it too (as per SAP Press text book).
Is there anything else I need to do here? I am not mapping the returned fault - does the fault need to be mapped (not sure how I would do this given that the synch step uses an abstract interface and therefore to my knowledge no fault mapping can be done)?
There are 2 Notes that describe my issue exactly:
https://service.sap.com/sap/support/notes/1484903
https://service.sap.com/sap/support/notes/1158699 <-- this one refers more to me, but we already have in 7.11
Can anyone let me know exactly the steps I would perform to handle these faults - does the exception name / handler A above need to be named the actual exception / fault ObjectNotFoundFault?
Any help appreciated.
Thanks,
Keith)?
Any help appreciated.
Thanks,
Keith

Thanks - my scenario I guess is #2 of that blog. But is your take that even if I don't care what is in the fault message, i.e. I don't care about the contents of it but rather I just want to continue on from it, that I still need to perform this java coding? It's not clear to me from what he says - it seems to me he does the java coding to actually capture the contents of the message. I am in fact using the soap axis adapter too, as he is. The screen shot showing the exception branch is basically what I have.
Regards,
Keith

Split message mapping to integration process

Hi,
I faced an error when trying to send a multiple message (after a message split) to an integration process and I would like to know the possibilities to resolve this issue.
What I want to do (more details below) :
1. Get an order list from a database
2. Split the order list in multiple orders (via a multi-mapping)
3. For each order, create a new integration process instance
The error I got is:
Messages in multi message format can be sent to one adapter engine only
The solutions I thought of:
- Creating a new integration process / Update the existing integration process in order to execute the message split in the process engine
- Create a new service (or business system) as a receiver instead of the process that points back to another XI service and set-up the appropriate configuration between the second service and the existing integration process
My question: is there another solution than the two above?
Thanks in advance
Here are the details of what I did:
1. A JDBC request returns an order list like:
<resultSet>
 <row>
 <order>[...order 1 details...]</order>
 </row>
 <row>
 <order>[...order 2 details...]</order>
 </row>
</resultSet>
2. During interface determination phase, a multi-mapping is executed to produce several orders:
<order>[...order 1 details...]</order>
<order>[...order 2 details...]</order>
3. The target receiver is an integration process who take as initial document only one order ; so, having two orders as a result of the split, I would like XI to create two new instances of my integration process, each receiving exactly one order.
And there's when the above error occured.

Hi Alexis
Creating a new integration process is suggested as your target receiver is your current integration process and along with this splitting and passing data to multiple receiver can be done in integration process.
Thanks
Mitesh

Message Handling in HCM Process and Forms

Hi,
I have added own messages logic
MESSAGE_HANDLER Type Ref To IF_HRBAS_MESSAGE_HANDLER
message_handler->add_message( message = message ).
in "DO_OPERATION" method of Generic Service in HCM process and Forms.
Problem : We have handled messages in method "DO_OPERATION" but when we click on NEXT push button (review and send)at mss level, same error messages is displayed for 2 times above the adobe form.
Same error messages are displayed as many times as we click on NEXT push button.
Need Solution : It is supposed to display only once.
Thank You,
Swetha.C

Hi Shweta,
Please check SY-UCOMM in both the cases.
1. After Selecting Position
2. After Clicking 'Next' Button.
If SY-UCOMM is different, Then Add message to Message_handler only when Position is selected.
That means If sy-ucomm = Position select User command
Then Add message to Message_handler.
endif.
'Else dont ADD'
Hope this helps.
Pradeep.

How to get error message from the BPEL process

Hi,
We have some BPEL processes running in BPEL PM 10g. If any of these BPEL process fails, we would like to get the error message caused this process to fail.
Please let me know where does the BPEL proccess holds (table/file) these details. or is it possible to get the error message programatically.
Thanks

You can go through below link that can help
http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/faults.htm#sthref1186
http://bpelknowledge.blogspot.com/2010/07/error-conditions-that-cannot-be-handled.html
http://blog.whitehorses.nl/2009/11/03/error-handling-in-soa-suite-11g/
Hope it helps!!
Thanks
AJ

Configuration for Message Exchange in integration process

Hi,
I'm a beginner in SAP XI (7.0) and trying to develop an integration process for a purchase order.
There will be sent a message via Http to a receiver with Ftp.
So for the integration process are two communication channels necessary which will be defined in the integration directory:
One for the Sender: Http.
One for the receiver: Ftp.
Within the integration process are some sender and receiver steps with Bapi's.
My questions are:
- how and where could these sendings to a Bapi (send step) and from a Bapi (receive step) be configured?
- is it possible at all to configure a communication channel for these sending and receiving steps within a integration process?
Thanks for your help!
Zoran

Hi Zoran
While using BPM as well you will need to have communication channels.
BPM - > BAPI request.
BAPI response -> BPM
both sender and receiver channels are required for you.
1.Demand for a material is send via HTTP to XI
2.XI does a material availability check to the SAP system
3.A material reservation has to be done if there are any materials available in the stock (inventory) to the SAP system
4.If there is no material available a purchase order to a supplier (no SAP) has to be done via FTP
5.Parallel to the purchase order a purchase order confirmation is send to the the SAP system.
6.The supplier sends a purchase order confirmation to XI
7.The XI sends a purchase order confirmation to the SAP system
If i understood your requirement correctly and you want to use BPM. You need to do following in BPM
Receivestep1(receive HTTP post) -> transform1(mapping to BAPI request) ->send step1(Send BAPI request to SAP) -> Receivestep2 (Receive BAPI response from SAP) -> Transform2 (Map BAPI response to File)-> send2(File post to non SAP supplier)-> Receive3(receive purchase order confirmation)-> transform3(map to SAP purchase order confirmation)-> send3(Purchase order confirmation to sap)
You need no of channels
1.Receive 1 - (HTTP)
2.Send1/Receive2 - (RFC)
3.Send2 - (FTP)
4. Receive3( HTTP or FTP)
5. For purchase order confirmation.
Thanks
Gaurav

[BUG] Problem with Error message handling in JDeveloper 11.2.1.0

Hello!
I'm Daniel from Brazil.
I have been facing a problem recently to which I see no solution. I need to use a specific component called 'Panel Label and Message' in order to nest three other components which need to be grouped together to work properly (an input text box, a LOV calling 'search button', which searchs and populates the input box, and an output text box which displays text depending on the input field). This works fine!!
The problem comes when I try to place an Access Key that should focus on the input text box part of the group component. In order to do that, I put it on the 'Panel Label and Message' component, and set the 'for' property to the input text box. This too works fine, as when I access it the component redirect the focus to the right place.
Problem is, when the user decides to this specific field (which is required) blank, JDev has problems handling the actual name of the component, and just calls it 'Component', as the screenshots below show. Apparently, for the other error messages that are handled by myself or generated by other means, it deals with the component's actual name just fine. Is there any way around this? Thanks!
'Panel Label and Message' component properties. it9 is the id of the 'Input Text' field component. Access Key set to F.
http://img.photobucket.com/albums/v82/myfireburnsblack/PropertiesErrorBug.png
Error message I get (it's in portuguese). Field has been left blank, and JDev says I have to put something in, but refers to the field as 'Component'. Any other error is handled correctly, as far as I've tested.
http://img.photobucket.com/albums/v82/myfireburnsblack/jdevError.png

Hi Daniel,
You're not the only one who has seen this: {message:id=9938606}
As mentioned in that other thread - I had tested similar use cases and it works for me.
Do you have access to https://support.oracle.com to file an SR?
John

Capturing of Message ID in Integration process

Hello,
I have a scenario where my a file is picked from FTP server and passed to Integration process. Here if there is any failure in IP then i am throwing alert. Here i am preparing dynamic text in alert message. But my problem here is i am not able to catpture Message ID whereas i am able to capture all standard variables like SenderParty and etc.
Please help me in this regard,
Thanks,
Vijay Kumar T.

Hi,
I have implemented the same. I have used container variables and used it in the Title of my AlertMessage.Store the Message Id after the receive step of BPM. Pass this value to the Function that triggers the Alert from Transformation step. We have a RFC SCREATE_ALERT that is used to set container values.
With Dynamic Text, i feel it always gives the processId.You can have MessageId in Alert Long text.Store the MessageID in a container element of BPM and use it in the control step message text : &message_id&. Dont forget to check the Dynamic Text in the properties of ur AlertCategory.
Hope this gives u an idea.
Ref this link for the possible container variables
http://help.sap.com/saphelp_nw04/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
SXMS_MSG_GUID - SXMSMGUIDC - Message ID

Error message handling in Integration Process

Similar Messages

Maybe you are looking for