Error Message : Object does not exist (status management)

Hi Gurus,
I am working on tcode IW52(Change Notifications). and using badi's for validations at different points.
1. Order level,
2. Notification,
3. Task level validations.
In the task level validations, I have an requirement that if certain condition is met, than user should not be able to delete the task. I have no problem doing that, I am able to restrict it.
Now the issue is :
Say you have 6 tasks, and condition is met for the 5th task and I try to delete it. then the error message "can not delete task" is getting triggered from the badi.
and after this error message if you try to do any functionality on the 6th task, I am experiencing error message "Object does not exist (status management)".
Is anyone aware of this error message, any suggestions are highly appreciated.
Thanks in advance.
Shrikant
Edited by: Alvaro Tejada Galindo on Mar 17, 2008 1:56 PM

Hi ,
You have posted this question long back that is one and half year back nearly.
You got an error message in IW52 stating Object does not exist ( status management ).
Now iam also facing the same problem in iw22 transaction. Can you say me how you solved if you remember.

Similar Messages

Error-IM258-Object does not exist (Status Management)

Dear All
We have used the enhancement "MCI10001" for triggering the external E mail while scheduling the maintenance plan using T code IP10.
System will fetch the E mail ID from the equipment master -partner function either Vendor or User responsible and sends the mail
But while executing IP10 system throws an error message as follows
Error Msg no: IM 258- Object does not exist (Status Management)
This refers to an error in central status management.
Kindly help on the above issue
Regards
Thyagarajan

l have same problem my code below
help me please .
if email is not INITIAL and ulke is not initial and sy-tcode eq 'QM01' and sy-ucomm eq 'BUCH' and I_VIQMEL-QMART = 'Q1'.
    CALL FUNCTION 'POPUP_TO_CONFIRM'
      EXPORTING
        TITLEBAR       = 'E-mail'
        TEXT_QUESTION = 'E-mail Göndermek istiyormusunuz ?'
      IMPORTING
        ANSWER         = answer
      EXCEPTIONS
        TEXT_NOT_FOUND = 1
        OTHERS         = 2.
if answer eq 1 and ulke = 'TR'.
lt_mailtxt ='Değerli Müşterimiz,'.
APPEND lt_mailtxt.clear lt_mailtxt.
lt_mailtxt = 'Şikayetiniz sistemimize alınmıştır. Müşteri şikayeti sorumlularımız sizlerle en yakın zamanda irtibata '.
APPEND lt_mailtxt.clear lt_mailtxt.
lt_mailtxt = 'geçeceklerdir. Şikayetiniz için teşekkür eder, saygılarımızı sunarız.'.
APPEND lt_mailtxt.clear lt_mailtxt.
lt_mailtxt =''.
APPEND lt_mailtxt.clear lt_mailtxt.
data: it_packing_list like sopcklsti1 occurs 0 with header line,
       it_receivers like somlreci1 occurs 0 with header line,
        gd_cnt type i,
        gd_sent_all(1) type c,
        gd_doc_data like sodocchgi1,
        gd_error type sy-subrc.
gd_doc_data-doc_size = it_packing_list-body_num * 255.
Populate the subject/generic message attributes.
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = 'Naksan KGM'.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table lt_mailtxt lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
CLEAR it_receivers.
it_receivers-receiver = email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
call function 'SO_DOCUMENT_SEND_API1'
       exporting
            document_data              = gd_doc_data
            put_in_outbox              = 'X'
            sender_address             = 'sinan.tataroglu@***.com'
            sender_address_type        = 'INT'
            commit_work                = 'X'
       importing
            sent_to_all                = gd_sent_all
       tables
            packing_list               = it_packing_list
            contents_txt               = lt_mailtxt[]
            receivers                  = it_receivers
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
IF sy-subrc EQ 0.
COMMIT WORK.
Push mail out from SAP outbox.
SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF.
elseif ulke ne 'TR' and answer eq 1.
lt_mailtxt ='Dear Customer,'.
APPEND lt_mailtxt.clear lt_mailtxt.
lt_mailtxt = 'Your compliant has just entered to system. Customer complaint responsible will contact with you ASAP.'.
APPEND lt_mailtxt.clear lt_mailtxt.
lt_mailtxt = 'Thanks for your complaint.'.
APPEND lt_mailtxt.clear lt_mailtxt.
gd_doc_data-doc_size = it_packing_list-body_num * 255.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = 'Naksan KGM'.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table lt_mailtxt lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
CLEAR it_receivers.
it_receivers-receiver = email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
call function 'SO_DOCUMENT_SEND_API1'
       exporting
            document_data              = gd_doc_data
            put_in_outbox              = 'X'
            sender_address             = 'peykan.samli@****.com'
            sender_address_type        = 'INT'
            commit_work                = 'X'
       importing
            sent_to_all                = gd_sent_all
       tables
            packing_list               = it_packing_list
            contents_txt               = lt_mailtxt[] "it_message
            receivers                  = it_receivers
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
IF sy-subrc EQ 0.
COMMIT WORK.
Push mail out from SAP outbox.
SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF.

Object does not exist (status management)

Hi,
When I create a notification and click save button, I am getting the following error.
Object does not exist (status management)
Message no. IM258
Diagnosis
This refers to an error in central status management.
Task status
The central status management connection at task level will only be supported from Release 3.0.
For this reason, no task status is available for statuses created before changing to Release 3.0, and status change is therefore also not possible.
Procedure
In the case of task statuses of notifications in releases prior to 3.0:
When you save a notification you can create a status for the tasks.
In the case of notification or task statuses for notifications from Release 3.0:
Please refer to your system administrator.
thanks and regards
muru

Dear,
Please refer the OSS Note 437878 - Status data missing for PM/CS notifications .
Regards,
R.Brahmankar

Sales Order Error Message 'Product does not exist in system'

Hi Gurus,
we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
Please help me with that issue. Your help will be highly appreciated!!!
Kind regards
Hannes

Solved with the help of SAP.
Keywords: COM_PRODUCT
COM_PRODUCT_GUID_GET_INTERNAL
CONVERSION_EXIT_PRID1_INPUT
CRM_ORDERADM_I 501
Relevant notes:
Note 1449146 - Dump While Creation IP via WebUI
Note 1445079 - Unable to add products to contract
The notes do not exactly described our issue but the code corrections were still relevent for us.

Error message "resource does not exist"

C6; have unistalled and reinstalled ovi store three times; now I get into the store, but when attempting to download app, get error message "resource does not exist". what is that???

hey guys just updating you all.. i wrote previously how my ovi store wasn't working, it gave me an error message 'resource does not exist'. i did soft/hard reset, also uninstalled ovi store and reinstalled STILL it wasn't working. It lasted a day. And today it's working fine. i think it was a problem with their server. It sorted it self out
But guys i did contact the team, and i got a reply that said i should do the following if it still doesn't work:
1. GO TO MENU
2. GO TO INTERNET
3. CLICK ON WEB
4.GO TO OPTIONS
5. GO TO CLEAR PRIVACY DATA
6. DELETE CATCHE AND COOKIES
That should apperantly work.
If not guys, then i wouldn't worry. Just like mines, yours should sort it self out

Workflow error : execute_method_object_sync Object does not exist

Hi Experts,
I am facing this error in the following scenario.
1. I have Z business object delegated from the standard BO BUS2105.
2. In one of the events, we are triggered another workflow by FM SWE_EVENT_CREATE.
3. the FM SWE_EVENT_CREATE does not have a COMMIT WORK.
4. this issue is being faced only in production environment in few cases.
5. I am getting the error message execute_method_object_sync Object does not exist and also
execute_method_bor object does not exist.
Please let me know the reason behind this issue. it works perfectly fine in development and test systems.
Is the issue because of the non existence of commit work? and I have not called in update task.
Please guide me.
Thanks,
Rohan

Hi Dolly,
I think your DS is based on an ABAP query which is not available in the source system. Check if that is transported/active.

Error - "Message Interface does not exist in any software components"

HI
This is an Idoc sender - SOAP receiver scenario.
When I try to create the receiver determination, I get a warning message -
" Message interface does not exist in any software components installed on this business system"
I checked all the usual things & also reimported the IDoc metadata.
Any suggestions are appreciated!
Thanks
Rachana

Hi Rachana !!
You should also check if the given idoc type in mapping is the same that in the WE20.
Also try to reactivate your integration directory objects by making any dummy changes.
Check your receiver business system (I mean XI), that the logical systems are ok.
Check this document (page 31):
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f2a9fa2-0a01-0010-32ac-d281db722b86
Regards,
Matias.
Message was edited by:
Matias Denker
Message was edited by:
Matias Denker

Error when trying to install the adobe creative suite exit code 39.I get the following error message Directory does not exist : /Applications/Utilities/Adobe Application Manager/DECore/DE6/resources/uninstall/Uninstall Product.app

i have run the adobe cleaner , repaired disk permission and also tried to download and install several times.
this is a mac osx running the yoshmite
please help
this is the error
Exit Code: 39
Please see specific errors below for troubleshooting. For example, ERROR: DW042 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
ERROR: Directory does not exist : /Applications/Utilities/Adobe Application Manager/DECore/DE6/resources/uninstall/Uninstall Product.app
ERROR: DW042: ARP Entry couldn't be created for language : en_US

Oliviat14nov does /Applications/Utilities/Adobe Application Manager/DECore/DE6/resources/uninstall exist on your computer?

Error message: PLSQL_OBJECT_SOURCE does not exist

I developed an application on a Vista machine (not sure if that matters) and then transferred it using Data Pump Export (expdp) and Data Pump Import (impdp) to another machine (running Windows XP). The application works fine. However, when I try to compile one of my procedures I get the error:
"RA-20102 Application Collection PLSQL_OBJECT_SOURCE does not exist."
Does anyone know what this means or how to fix it?
Thanks!

I don't know what PLSQL_OBJECT_SOURCE is. It is nothing that I created.
I am doing the compile using the standard Apex compiler. That is, I go to the Procedure using Object Browser and just click the compile button.
I am not able to share my code, but I don't think it would help anyway. I thought this was some type of standard error message or something. I don't know what PLSQL_OBJECT_SOURCE is, but I assumed from the message that it is something that is supposed to come with Oracle App Express but somehow might be missing or damaged on that machine. I just don't know.

Error message BP does not exist while creating service order in WEB UI

Hi Experts,
i have an issue while creating a service order in WEB UI the system is automatically taking the BP ""created By"" but while saving the document Error message showing "BP does not exist"
we have already completed set up integration with HR .created the user as BP Role "employee"
Kindly suggest what are the other configuration that need to be checked.
Regards,
D Panda

Hi,
Have you made the assignment of the user (defaulting in created by) to the employee (under the identification tab in employee)?
Regards,
Parul

Error Message - Project does not exist

Hi All,
While trying to open a project though CJ20 transcation , I am getting following error message.
"The project does not exist."
Please suggest how to resolve it.
Regards,
Vishal

Ensure you are entering the project number correctly as per the coding mask.
else
Check in the table if it indeed exists.
Go to table display t code SE16/SE11
Open table PROJ
Give your project number as input (make sure what you enter is correct as per the coding mask)
check if this project details are in the table.
with regards,
Ravi

Error message: "KNA1 does not exist, KNVI does" at Customer creation

Hi all,
I have created a new Account group (copy of an existing) and assigned an external number range.
I have no problems entering the General data or Company code data but when going to Sales area data I get the following error message:
Check: Table KNA1 does not exist, table KNVI does
Message no. F2 061
Please let me know if you have any idea around the error.
Thanks,
//anders

Have you archived the previous customer?
If so the records in the table KNA1 was archieved and KNVI was not archieved.
In other words, There is inconsistencies in the database tables KNA1 and KNVI, that is table KNA1 that is main table for customer says that the customer does not exists but table KNVI for tax classification gives tax details for the customer.

KKBC_HOE Summarized object does not exist:

I've set up a new Hierarchy for CO Summarization using KKR0.
Before doing that I created a new status profile with BS42
In the Hierarchy I've liinked the status profile which tells the hierarchy to only summarize DLV - Delivered orders.
After executing KKRC I attempt to run KKBC_HOE and I get the following error:
Summarized object does not exist: CO ZDLV
Message no. KN 020
Diagnosis
You have not carried out summarization for this order hierarchy or cost object hierarchy. For this reason it is not possible to display any information on node CO ZDLV .
Procedure
Carry out order summarization or cost object summarization. Then call up the function again.
I've tired re-running KKRC a couple times but I still get this error. When I review ZDLV configuration the "summarized" box is checked.
Does anyone have any ideas why I am getting this error.
Dan

We are on 4.6C and have not been keeping it up to date. We are something like 30 update packets behind. I started with this company back in Novemeber. As a result I think some weird things happen to us because the system isnot up to date. after the first month of using the new hierarchy now when I run KKRC and KKRV I am able to execute KKBC_HOE. All is right with the world, well for this problem anyway.
Take care,
Dan
Edited by: Daniel Goodhart1 on Feb 14, 2011 3:41 PM

Error IW351-------System: Status object does not exist

Hello,
I am getting bleow error while saving service order.
System: Status object does not exist. Message Numner IW351
Actually I have done one enhcement in the User exit of the Sales order in the form Routine...
USEREXIT_SAVE_DOCUMENT_PREPARE in MV45afzz.
When i Try to save the service order i get the error messages which is coming from my validation
After the error messgae i press ENTER and then try to change the order by clcicking on the advance shipment.
As soon as i click on that i get a STOP messgae.
Which i as below.
System: Status object does not exist
If I comment all my code and write only error message then it comes.
but it does't come for information and warning message.
actually steps are
1. go to IW51
2. create notification then service order then sales order
3. if product hierarchy is different for material then it should display error on saving
4. it is giving error message(my error message)
5. if i press enter and then click on advance shipment icon(truck) for change it display standard message.
which turn me out of transaction.
but if i click on advance shipment icon without pressing enter its working fine..
my error message is a normal error message .
message e038(zcrm)
" service line must be same".
pls suggest.
Regards
LOKESH

Hi,
After MESSAGE add STOP. :
MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
STOP.
or If ambiguity with usage of STOP being obselete use EXIT after message.
MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
EXIT.
BR
Dep

BUS2080 "OBJECT DOES NOT EXIST" error message....

Hi Gurus,
I am trying to create a workflow for Service Process Notification in SWDD using BO BUS2080 . The Work Flow is activated without any errors but when i enter the instance number it comes as "OBJECT DOES NOT EXIST".
I created a subtype for BUS2080 ,delegated the object and i am using the parent object in my work flow.Please help me out in executing my Work Flow.
Thanks,
Syed.

Please check first in SWO1 whether the object instance exist or not. I hope you are giving the right key fields. First test with correct key fields thru SWO1.
<b>Reward points if useful</b>

Error Message : Object does not exist (status management)

Similar Messages

Maybe you are looking for