Error message while changing the delimit date of a job in ppome
Hi experts,
I have delimited a job in ppome to date 11.05.2011. But now i want to remove that delimit date and change it to unlimited(31.12.2999). when iam trying to change the delimit date it is showing a popup message 'select a date between 15.11.2008 and 11.05.2011'. Can anyone say why it is showing this message. how can i delimit that job again to 31.12.2999.? Same problem with the position also.
Pls help...
Dear Priaynka,
Thanx for ur reply, I am again furnishing below the details:-
I have to change the Valuation Class of the material :-
7 POS for which Goods Receipt & Invoice Receipt have been done from period 1 to 7.
1 PO for which Goods Receipt & Invoice Receipt have not been made.
All the material reced in period 1-7 have been consumed by MFBF. Now no material is available in the material in that plant.
Should I change the valuation class by deleting the line item of all the PO's 7 POs + 1 PO.
Please advise, as the fresh PO will be made with new val class and GR/IR and Consyumption will happen after the change is made.
Please advise if I am wrong in the procedure.
Regards,
Alok
Similar Messages
-
I get an error message while converting the file. you do not have the privilege to make changes. I get this message when I try to import a music CD
Hey amba1015,
I found an article that talks about similar error messages in relation to importing an audio CD. Check out the recommended troubleshooting steps in here to see if they help:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/TS1387
Welcome to Apple Support Communities!
Have a good one,
Delgadoh -
Receiving the error message while executing the Real Time DTP
Hi,
I am receiving the error message while executing the Real time DTP for Billing data.
Error Message - Record filtered in advance as error records with the same key exist RSM2 722
When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
Diagnosis
The existing DTP requires a serialized update because fields are updated
non-commutatively during the processing run (for example, MOVE).
Therefore all new data records that have the same semantic key as
incorrect records that have not yet been corrected in earlier requests
or earlier data packages of the same request, are filtered out after the
extraction in a special step. In this way the system ensures that
incorrect data records are not repeated for your changes, which may not
contain errors themselves.
System Response
The data record is not updated but is written to an error stack.
Procedure
Procedure
Correct all incorrect data records and update them using an error DTP.
Procedure for System Administration
I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
Regards,
RamHi Arvindh,
Its write optimized DSO.. there is no option to generate SIDs.
Hi Kiran,
I checked the link u sent me. Here the main issue is..The function module is standard and its not allowing me to do enhancement point..
Any idea in using Badi's??
Thanks all... -
Short dump while changing the end date of infotype 0167 through PA30
Hi all,
I am getting short dump while changing the end date of infotype 0167(Health Plans) through Tcode PA30.
dump descript is as below
An exception occurred that was not caught.
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_HRPA_VIOLATED_POSTCOND
Date and Time 11.03.2010 07:06:26
What happened?
The exception 'CX_HRPA_VIOLATED_POSTCONDITION' was raised, but it was not
caught anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_HRPA_SAPUP50R_ADAPTER======CP' has to be
terminated.
thanks
shahidSearch OSS Notes for that.
-
Error message while running the payroll-no entry found in table t54c1
Hi All,
Im getting this error-error message while running the payroll-no entry found in table t54c1.What is the reason for this error?
How doi solve it?Hello
From the description of your problem above, your cumulation calender has not been generated for that month.
Please take necessary action to ensure that calendar type is assigned to pay period in payroll area, by maintaining the payroll period which is represented by Date modifier and period modifier in view maintainance for table T54C1.
Entries for this table are generated with the program RPUCTP10. (You should not have to create manual entries in this table.)
Thanks and Kind Regards
Ramana -
i am getting the following error message while opening the fire fox browser "sript file:///programe % 20 files/siber%AT% 20roboform/Firefox/components/ref helper.JS:510 in English
ls -l /var/run/lighttpd/
And how are you spawning the php instances? I don't see that in the daemons array anywhere.
EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
You will note that with pre-spawned information, the config looks different[1].
You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
[1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change" -
Error message while uploading the flat file
Hi Experts,
I am getting the error message while uploading the flat file.
Message class: MG
Number: 147
The message is: Several descriptions exist for the language JA.
Please guide me why this error is occuring.
Regards
Akshayhi,
how are you uploading the file and where ?
u can use open dataset , read dataset or gui_upload
check this link
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e92637c2cbf357e10000009b38f936/frameset.htm -
Costing error while change the mrp data
Hi dears,
This is Rem process. when i try to change the material master MRP data ex. ( mrp type M1 to M0)
system not allow to change and show the error as
Product cost collector 000000750122 is still active (assigned to PrCtr 50601-025)
pls give some hints to clear
Any program is there to change the MRP data for the material master in production server directly
thanksDear ,
Did you try MASS or MM70 Transction ?
If you do not want to go for Deletion flag of PCC , you need to settle the REM qty .You need to do product cost for semi finished product and finsihed product in KKF6N and after that you have to do mark and release in CK24N .For standard cat Estimate create std Cost estimation(CK11n) and std cost Estimation Mark & release(CK24) .
1.Backflush (confirmation) the Planned order - MFBF. Results planned order will Reduced and GR,GI, activity cost will be posted. U need not convert the planned order to production order, Confirmation for planned order only.
2.To see Backflushed documents MF12
3.Then Goto KKF6n to see the Manufaturing cost.
4.Over head calculation - (Co42)
5. Variance calculation (KKS6)
6.Settlement(KK87)
Try and revert back
Regards
JH -
Bypass the error messages while opening the Web Analysis 9.3.1 Report
I am using WA 9.3.1 to create a few reports. The login users will have some essbase meta-read security filters to restrict the access into certain regions and entities.
For example:
user a has the meta-read and read access of @idescendants (east);
user b has the meta-read and read access of @idescendants (west);
user c has all the accesses
However, in the first start-up page (Web Analysis 9.3.1 dashboard), I have a dashboard which contains all the regions access. When user a login, he shall only see his own dashboard (speedometers, etc.).
Currently the user login will get some error messages (such as "loading document produce error", etc). I wonder whether we can set the message level in Web Analysis so that there is no such error message while the user is opening the reports.
ThanksKaren,
Thanks for the reply.
I have checked my Web Analysis report, and I still have the error message of "Error Occur while opening document. Document ID = {0}" while using the some user id to login.
In my Web Analysis database connection preference, my setting is "user the user id and password". I have verified this (when I use "user a" to login, and in essbase connection, i can see the session with "user a").
In the WA report, however, I use the multiple-level combo box, so that it can give me different levels of entities, for example, the top level is all regions, the 2nd level is east/west/south/ ec, and the next level is cities, and so on. And if "user a" login, he will be able to see the all regions and east, and then east cities (of course, if he select all regions, there will be no data available).
Do you think this multiple level combo boxes can be the cause of this error message?
Thanks a lot -
Errors Message while issuing the material in MB1A i.e unrestricted material
Hi Expert,
I want know the Message while issuing the material in MB1A we are getting the error unrestricted material, so what is the reason of error.(i.e there is no stock available or any other give me the reply as soon as possible)
Regards,
Ram RathodeYou are not clear. What is the error message that you get?
-
Getting error IMPORT_WRONG_END_POS while changing the order
Hi All,
in Capital investment order, i am trying to change the operation data for service (PM03) for which PR has been created already,
i am getting abap runtime error.
FM is active for order type and PO has not been created yet.
Runtime Errors IMPORT_WRONG_END_POS
Except. CX_SY_IMPORT_MISMATCH_ERROR
and these are the problem lines.
195 IMPORT BANF_HHM FROM MEMORY ID 'BANF_HHM'. "956751
>>>>> IF l_order_fistl <> BANF_HHM-fistl OR "956751
197 l_order_fipos <> BANF_HHM-fipos OR "956751
198 l_order_fonds <> BANF_HHM-fonds OR "956751
199 l_order_fkber <> BANF_HHM-fkber OR "956751
200 l_order_grant <> BANF_HHM-grant. "956751
201 l_FM_changed_to_original_value = YX. "956751
202 ENDIF. "956751
203 FREE MEMORY ID 'BANF_HHM'. "956751
204 IF NOT flg_FM_changed IS INITIAL "note 767333
205 OR NOT l_FM_changed_to_original_value IS INITIAL. "956751
206 IF CAUFVD-flg_hhm IS INITIAL. "note 767333
207 CAUFVD-flg_hhm = YX. "note 767333
208 PERFORM CAUFV_UPD(SAPLCOBH) USING CAUFVD. "note 767333
209 ENDIF. "note 767333
210 * Check, if FM data are allowed for re-derivation"note 767333
211 * (->only allowed, when no purchase order exists)"note 767333
212 PERFORM CHECK_PURCHASE_ORDER_EXISTS "note 767333
213 CHANGING PURCHASE_REQUI_EXISTS "note 767333
214 PURCHASE_ORDER_EXISTS. "note 767333
215 * In case of existing purchase requisitions, "note 767333
We are using 604 release.
Pls help.
SandeepHi
Did you get the solution. We got the same error and nothing we can think of.
Any advise. -
Error message while Archiving the PO on 4.6C version
Hello Team ,
We are archiving the PO in SAP 4.6C version.
Some of the PO failed with the below error message "4203018801 Item 00002 still entered in info record as last document item".
i have kept the deletion flag for the info record and tried to archive the same. But it got failed.
Can any one help me how to overcome this error.Hi,
Ensure that the deletion indicator has been set to the correct info record. Please check in table EINA, whether the deletion indicator (EINA - LOEKZ) is flagged for the material and vendor combination.
If everything is flagged correctly and still system is throwing the same error message, please check the note: 335800 - SARA: Deletion indicator not set, but why?
Regards,
AKPT -
Error message while saving the sales order
hi all,
i have maintained a material material master, sold to etc pr00 conditions maintained, schedule line is determined correctly but i am still getting this message while saving the order
"Product 234345 does not have schedules assigned. Contact system administrator
Message no. ZV276"
can anybody help?
SaSuman,
i would suggest you please sit with your abaper he can might be solved your issue.
because Message no. ZV276 seems to be comes from user-exit which you implement for VA01/VA02 Tx.
Amit. -
Error Message while converting the PO to A/P Invoice
Hi,
We use Business one 2007A. One of the users is getting the error message that says "Object reference not set to an instance of an object" while adding the A/P invoice.
As a super user, I am able to add the invoice.
Can someone tell me what this issue is?
ThanksHi,
You may check "Object Reference Not Set To An Instance Of An Object"
Thanks,
Gordon -
Error message while running the report RFUMSV50 (Service Tax)
Hi Experts,
I have occured the following error while running the Report for for transferring the Service Tax from Interim to Final Account.
F107: Restrict Period
F7566
I have executed the report RFUMSV50 by T.Code SE38
Please help me in this matter.
Thanks
PriyaHi
have you checked
1. Global Parameters for Company Code
. Currency Trln Rate set as '2' (WhichMeans exchange rate determined using posting date)
2. Deferred Tax code Z0 created with Target Tax Code Z1
Cya
udayakumar.k
Maybe you are looking for
-
Exchange 2007 account won't go online
Hi, I am running OS X 10.6.4 on my MacBook, with the latest versions of everything available through Software Update. I am unable to get iCal to work with my Exchange 2007 account. I can add the account through preferences, but it never shows up in t
-
More than one name with the same email
Hello there! I have an account with skype that i use frequently and once i forgot my password and got the link on my email. when i tried to log in and change password i found out that i have three names and i don't want them all, so how can i delete
-
Can a report use the same session as a calling form?
Hi, I am using Oracle Forms and Reports 6i. I am wanting to call a report from a form and open it in the same session. The form will insert information into a number of global temporary tables that the report will use to display the query information
-
PDF file looks fine but prints fuzzy
Hi, I am making music books for a publishing company and we are having an issue with some PDF's. To let you know what we are dealing with I will provide you with some critical info. I recieve 600 DPI scans as PDF's of books with music in them from ou
-
Hi, Am new to this board. Looking at purchasing the above model through Apple and would like advise whether or not to upgrade the memory from 2 to 4 and the hard drive from 120 to 160 (if at all) when I make this purchase. The reason I ask this is da